Home

National Parks Explorer 3D User Guide

1. To delete custom objects from a region tpo document 1 Choose Delete Contents from the File menu The Confirm Deletion dialog box appears showing what types of custom objects you may delete from the region tpo file 2 Check the objects you want to delete 3 Click OK Navigating and Searching the Park Maps You can navigate National Parks Explorer 3D s maps in many ways You can zoom in or out to see different levels of map detail scroll seamlessly across map boundaries and jump instantly to any location for which you know the name or coordinate Tip To see a list of all objects on your map under the View menu click Note and Route List A list of elevation profiles routes and notes appears at the bottom of the window Choosing a Park to View When you start National Parks Explorer 3D a dialog box appears that allows you to choose the park you want to view To do this do one of two things e Click the right or left arrow buttons until the park you want appears Click Go e Or on the map click the pushpin for the park you wish to view Click Go Zooming Use the Zoom Tool Ha to change the level of detail and the scale of the map you are viewing Map scale is the relationship of a distance on the map and the corresponding distance on the earth Generally a larger scale shows more detail than a smaller scale Zoom in with the Zoom Tool to view an area of map in greater detail Zoom out to see a la
2. e Choose how you would like National Parks Explorer 3D to distribute Choose an appropriate method of distributing these waypoints e Prefix Enter a prefix for new waypoints on this route This prefix plus a number for each sequential waypoint will serve as the name for your GPS waypoints 5 Click Finish to create your GPS route Note Routes created with the Route Wizard will consist of a set of evenly spaced waypoints You can edit such a route by opening the Route Properties window and making changes on the GPS Details tab To create a GPS route by clicking down waypoints on the map 1 Choose Compass from the Tool menu or click the Compass button J 2 Position your cursor over the start of your intended route and left click to place the first waypoint 3 Move your cursor to the next location that you d like to place a waypoint and left click National Parks Explorer 3D displays this waypoint with a red line connecting it to the previous waypoint in your route 4 Continue to place as many waypoints along your route as you want up to the maximum allowed by your GPS receiver Note If a route is active red when you create new waypoints on the map National Parks Explorer 3D automatically adds those waypoints to the end of that active route Connecting to a GPS Receiver Connecting National Parks Explorer 3D directly to your GPS receiver is easy A direct connection allows you to automatically send wa
3. Gazetteer 2 Beside Name or text to search for enter the name of the location you are looking for 3 Choose a map level to go to see below National Parks Explorer 3D User Guide 2006 National Geographic Maps 21 4 Click Find Now National Parks Explorer 3D will search for matches and display these locations in the list below 5 Click on an entry in the list to preview its location on a small overview map 6 To jump to the selected location click Go The location you selected will appear at the center of your screen at the intersection of the red cross hairs Searching for Locations by Coordinates Great for GPS Users You can find a given latitude and longitude or UTM location on the map To search for a coordinate 1 From the View menu choose Coordinate Locator or left click the coordinate display in the lower right corner of the status bar The Coordinate Locator dialog box appears 2 Enter the latitude and longitude or UTM values of the position you want to find 3 Choose the map level that you want to view the position on 4 Click Go to jump to that position on the map The position you entered appears at the center of your screen at the intersection of the red cross hairs Tips To enter a UTM coordinate you must set the proper coordinate display View menu gt Preferences and Settings gt Units gt Coordinates You can also measure direction and distance between a location on the map an
4. This can be useful if you wish to set the anchor for a direction line on a specific location on the map where you have already placed a custom object 1 Choose Compass from the Tool menu or click the Compass button e 2 Hold down the Ctrl key 3 Move the cursor over the object and place the anchor for the direction line 4 Release the Ctrl key Building and Understanding Elevation Profiles National Parks Explorer 3D generates an elevation profile for any route you trace on the map An elevation profile is a graphic representation of the vertical gain and loss along a route Elevation profiles can show the following statistics for a route total gain total loss net gain and true overland distance Elevation profiles can be printed and saved to disk for use in other applications Building Elevation Profiles Once you have drawn a route National Parks Explorer 3D displays the route s statistics in the profile window Interactive features in the profile window allow you to identify where a point on the profile is located on the map To build a profile 1 Fora new route draw a route using the Route Tool see Drawing a Route on page 26 2 For an existing route choose the route by placing your cursor over it Right click the mouse to access the route s pop up editor National Parks Explorer 3D displays the profile in the dialog box Understanding the Profile and Profile Statistics The elevation profil
5. and or tracks into National Parks Explorer 3D they automatically appear on the maps Importing data is also a good way to manage and store GPS data gathered in the field Once you ve downloaded waypoints into National Parks Explorer 3D and saved them on your hard drive you can clear them from your GPS receiver so you won t have to scroll through them all when using your GPS on your next trip If you need to access the waypoints in the future you can always open the file in National Parks Explorer 3D and upload them back to your receiver To download from a GPS receiver 1 Connect your GPS to your computer see Connecting to a GPS Receiver on page 44 2 Select Import from GPS from the GPS menu The Wizard screen appears 3 Choose the type of GPS information you wish to import 4 Before you begin importing from your GPS you may wish to test the connection with your PC by clicking Test GPS Connection 5 Click Finish Depending on what you requested in step 3 you should see waypoints routes and or tracks appear on the maps and in National Parks Explorer 3D Note In order to import directly from your GPS receiver you must have the necessary cable and your receiver must support PC upload download If you are having trouble see Connecting to a GPS Receiver on page 44 Tracking your Position in Real Time Portable computer users can track their location in real time as they travel by having their GPS receiver sen
6. to see if a recent solution has been posted to the support page 10 National Parks Explorer 3D supports most popular handheld GPS receivers If you do not see your receiver manufacturer or model in the pull down menus on the Preferences dialog box visit http www topo com for a complete list of supported receivers and downloadable upgrades for new models Also visit our web site for new Connecting to GPS updates and free upgrades Note National Parks Explorer 3D requires a good cable connection between your GPS receiver and the communications port on your PC Make sure the PC cable is correctly attached to both your receiver and the PC Uploading to a GPS Receiver Export Wizard Exporting data from National Parks Explorer 3D to your GPS receiver is a great way to help you get where you want to go When you export waypoints and routes created in National Parks Explorer 3D they become available to you in your GPS receiver When you re out using your GPS you ll be able to select any of those waypoints or routes and your GPS will help guide you to them Creating waypoints and routes in National Parks Explorer 3D is much easier than creating them manually in your receiver J ust click on the map to place waypoints and use the keyboard to give those waypoints names Uploading data directly can save hours of work Waypoints and routes will appear in your receiver as you named them in National Parks Explorer 3D and if your
7. 27 Changing the Distance Units from Miles to Kilometers ccceceeeeeeeeeeeeeeeeaeeenanees 27 Extending or Shortening a ROUtC cccccce cece cere eee e eee eee eens eens rr rra 27 Starting a Route on Top of Other Custom Objects cccceccee cece ee eeeeeeeeeeeeaeeeenaee eas 28 Measuring Di A od 29 Radial Mode and Waypoint Mode ccccecee eee e eee eee e etna eee eee ena e tease eee eeeetaeeas 29 Measuring and Displaying Direction ccccc cece cece eee ence eee eee ee ee rnn nr rr 29 Placing an Anchor Point on Top of Other Custom Objects ceeeeeee eee eeeeeeeeeaeeeas 31 Building and Understanding Elevation Profiles cece eee e eee e nets eee eee eee eee eee teeta es 32 Building Elevation Profiles 00 ccecce cece cece eee eee ee ene eee eee eee eet aaa ena e eee e teeta 32 Understanding the Profile and Profile Statistics 0 cccceeceeee tees tees eee eae tees tees teens 32 Identifying Points Along the Elevation Profile on the Map scceeeeeeeeeeeeeeeeeeeeaeeeas 33 Resizing the Profile WindOW 0 c cceceeee eens eens eee teat teat teeta tetas ena rr rene 34 Printing and Exporting Elevation Profiles ccceeceeeee eee tees tees eee eae eee eeeeeeneeeaenias 34 Printing and Exporting M pS cccce cece eee nn rr rr rr rr rr 35 Obtaining Maps by Mallarino Aa EE T E E ARAR rr rr 35 Printing BASICS ienna ei e aa a A A
8. Click to center the cursor s location Overview Maps Zooming in on a small detailed portion of a large map can be disorienting To help you stay oriented National Parks Explorer 3D provides two overview maps on the right side of the screen A dark blue rectangle on the overview map indicates the area of map you are viewing Notice that as you travel the rectangle s position is updated on the overview maps To navigate using the Overview Maps 1 Place your cursor over the Overview Maps on the right side of the screen If the Overview Maps view does not appear in the View menu click Overview Maps Overview Maps 2 A light blue rectangle appears in place of your cursor The dark blue rectangle represents the area currently on display Position the light blue rectangle over the area of map you wish to view 3 Left click to jump to the light blue rectangle s location Tip To close or re open the overview maps view from the View menu click Overview Maps Searching for Named Locations National Parks Explorer 3D contains a comprehensive database of place names and natural features that allows you to easily search the maps for a specific location All of the information contained in the database or Gazetteer is from the named locations on the maps in this software The Gazetteer lists locations alphabetically or by feature type To search for a named location 1 From the View menu click Find
9. Parks Explorer 3D and used with permission 2006 National Geographic To learn more about extended use licenses please contact National Geographic at topo ngs org Exports for GPS Receivers You may use the Software to create and transfer Reproductions to GPS receivers for your personal use MapXchange Files tpo You may use the Software to create and distribute an unlimited number of mapXchange tpo format files to other licensed NATIONAL PARKS EXPLORER 3D users via e mail ftp and removable storage media as long as the Reproductions are distributed freely without charge in a non commercial manner in the tpo format that can be read by the NATIONAL PARKS EXPLORER 3D software MapXchange tpo files created for export to handhelds may not be distributed and are for your personal use To learn more about posting and downloading mapXchange files visit www nationalgeographic com topo Imagery for Web Sites You may use the software to create and display up to three view only map images on your personal business or institutional web site as long as the reproductions can be viewed freely without charge and that National Geographic is given legible credit on or adjacent to the reproduction as described in paragraph 1 on the output limitations section with a link to the National Geographic Maps web site national geographic com maps You may not display images that could be downloaded in a geo referenced format on any w
10. When you want to review a particular trail or load it back into your GPS select Open Map from the File menu Merging tpo files From the File menu select Merge tpo This allows you to combine the contents of one or more tpo files into one larger file For example you may wish to merge all your individual tpo files with GPS information on biking trails to create a master file containing route and waypoint information for all of your favorite rides Tip After merging select Save Map As from the File menu if you wish to preserve the original contents of the tpo file you just had open Creating New tpo files To create a new tpo file from the currently displayed park from the File menu select New Map for this park To create a new tpo file from another park from the File menu select New Map for a different park If you have created many waypoints or routes and wish to start placing new information on a clean slate open a new tpo file to wipe clean any active waypoint and route data Be sure to save any such data first if you don t want to lose it Importing Exporting GPS Geocache Information You can save National Parks Explorer 3D information as a gpx geocache file GPX GPS eXchange files allow you to transfer GPS data between software applications It describes waypoints tracks and routes If you wish to share GPS waypoint data with other National Parks Explorer 3D users it is more convenien
11. as a mapXchange tpo file Opening and Saving tpo Documents A mapXchange tpo document is where National Parks Explorer 3D stores any custom information you have added to the maps Other TOPO products can also open and view tpo documents Creating and saving new mapXchange tpo documents is easy They can be very useful for organizing and sharing information For example you could store all your favorite mountain biking trails in a document named mountainbike tpo and all your favorite hiking trails in a document named hike tpo If you wanted to give a friend your favorite mountain biking trails you could copy mountainbike tpo to a USB drive or CD R or e mail it If they owned National Parks Explorer 3D or the same TOPO region of maps they could open the mountainbike tpo document and view edit or print the maps with your custom trails To open a mapXchange tpo document 1 From the File menu choose Open Map 2 The File Open dialog box appears and displays a list tpo files that you have on your computer 3 Choose a file and click OK Tip National Parks Explorer 3D lists the last four tpo documents that you opened by name at the bottom of the File menu From the bottom of the File menu choose the document you want to open To create a new region tpo document 1 From the File menu choose Save Map As The Save As dialog box appears 2 Beside File Name enter a new name for the re
12. be useful if you wish to place a text box or symbol in a specific location on the map where you have already placed a custom object 1 Choose Note from the Tool Menu or click the Note button 2 Hold down the Ctrl key 3 Move the cursor over the object and place the Symbol or Text box 4 Release the Ctrl key Customizing the Maps with Grids National Parks Explorer 3D provides a powerful set of navigational tools that can help you plan a trip on screen and customize printed maps to keep you oriented in the backcountry Drawing your intended route on the map see Drawing a Route on page 26 and building an elevation profile of it see Building Elevation Profiles on page 32 will give you a good sense of how difficult the trip will be and how much time you should budget for it Note If you use a GPS receiver you ll benefit from reading both this chapter and the next Even if you don t have a cable to link your GPS to your computer including waypoints and grids on your print outs will allow you to use the coordinates reported by the GPS receiver to pinpoint your position on the map Determining Location and Reading Coordinates Coordinates are the numbers and or letters that precisely describe positions on the Earth As you move the cursor over the map window National Parks Explorer 3D displays the cursor s coordinates in the status bar at the lower right corner of your screen National Parks Explorer 3D lets you dis
13. inside ee AA AR A leaks 55 GPS rie ieee cag A Oak dan dbase antes ba tas 56 LIVE Update Sivad bla tira 56 Appendix D Tips Tricks amp Frequently Asked QUEStiONS ooooooccocccocccnncnnnnnnnnnncnnncnnnnnns 57 National Parks Explorer 3D End User License Agreement National Parks Explorer 3D BY INSTALLING THIS SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT DO NOT USE THE SOFTWARE RETURN THE SOFTWARE TO THE PLACE WHERE YOU OBTAINED IT WITHIN 30 DAYS OF THE DATE OF PURCHASE FOR A FULL REFUND 1 Grant of License This Agreement permits you Licensee to use the enclosed copyrighted machine readable software program and associated data files that comprise TOPO Software and the TOPO User s Guide Documentation This agreement permits you to use the Software to create customized maps elevation profiles exports for use with Pocket TOPO exports for use with GPS receivers graphic files and mapXchange tpo format files that can be output from the program Any map elevation profile export for Pocket TOPO export for GPS receivers graphics or mapXchange tpo format file that is generated from the software will be referred to in this license as a Reproduction This Agreement is a license agreement and not a sale of a software product The Software Documentation and Reproductions are furnished for your use and remain the
14. receiver supports waypoint messages they will appear as well National Parks Explorer 3D allows you to store all your GPS data on your PC Just load the data you need for a particular trip into your receiver and your GPS will have a list of waypoints that s easy to manage and keep track of when you re using it When you return download all the GPS data and save it in a tpo file This way you can delete old waypoints and routes from your receiver but still have a backup on your PC hard drive if you ever want to upload them again to the GPS To upload to a GPS receiver 1 Connect your GPS to your computer see Connecting to a GPS Receiver on page 44 2 Select Export to GPS from the GPS menu The Wizard screen will appear 3 Choose the type of GPS information you wish to export 4 Before you begin exporting to your GPS you may wish to test the connection with your PC by clicking Test GPS Connection 5 Click Finish Depending on what you requested in step 3 you should see waypoints and or routes now stored in your GPS receiver Note In order to import directly from your GPS receiver you must have the necessary cable and your receiver must support PC upload download If you are having trouble see Connecting to a GPS Receiver on page 44 Downloading from a GPS Receiver Import Wizard Importing data from your GPS receiver is an excellent way to see where you ve been When you import waypoints routes
15. 0 400 to enlarge the current map 5 To return to the standard scale for the current Map Level in National Parks Explorer 3D choose Select Normal 100 Note When you switch Map Levels the Magnify Map feature always returns to its normal setting at 100 magnification Traveling The Travel Tool il allows you to move the map in any direction and travel from map to map without interruption It is automatically selected when your cursor is near the edge of the map To scroll the map with the Traveling Tool 1 Do one of the following e From the Tool menu choose Traveling In the toolbar click the Travel Tool trie e Simply position the cursor near the edge of the map when using another tool 2 Position the arrow cursor in the direction you want to move 3 Hold the left mouse button down to begin traveling 4 Release the mouse button to stop traveling Tips The Traveling Tool is automatically selected when your cursor is near the edge of the map To control the traveling speed move the cursor toward the edge of the map to speed up or closer to the center to slow down You can also adjust the traveling speed View gt Preference and Settings gt Tools gt Traveling Centering The Centering Tool will bring any location to the center of your screen To use the Centering Tool 1 Choose Centering from the Tool menu or click the Centering button a 2 Position the cursor on the map 3
16. 4 00 mi 5 00 mi 212 26 mi 5911 Gain 344 3718 337 4 Show this editor each time a new route is created The Route pop up editor Using the Status Bar The status bar appears along the bottom of the National Parks Explorer 3D window and provides real time help and information The status bar is an excellent way to National Parks Explorer 3D User Guide 2006 National Geographic Maps learn to use all of National Parks Explorer 3D s features Check it frequently for tips help with tools route mileages and information about custom objects oe oN BSO i 1o SAA A pz Sy um Click and release left mouse button to start new route 37 49 333 N 119 41 361 W 7819 ft Status bar Quick Guide to Printing Most of the maps in National Parks Explorer 3D are much larger than a printed page The Print Tool allows you to easily define a page sized area of map for printing or exporting maps to a handheld To print a map from National Parks Explorer 3D do the following 1 Choose Print Map from the File menu or click the Print button S The Print Preview dialog box appears 2 In the top right corner choose a map magnification e g Reduce 75 3 Click the Print button For more information about printing maps see Printing and Exporting Maps Accessing Information and Getting Help Accessing Information National Parks Explorer 3D provides extensive information about the maps
17. 8 Choosing a Park 10 Vi Wasi detesessedeee bes doer diubesay bac bden vee ban Biss ara eens 18 ZOOMING EAEE ARENE OEA EE AOE E A E OET ai 18 Magnifying the Map ecceeee eia e ea a aa EA EATA AAEE 19 A guaia niro aee tell ais eha a a aa ia aro a aaa dcatait 19 Centenera atoe iA E E E a e a e e oha 20 Overview Maps 0000 A tae ode ee ees a th Pelee daa ee 20 Searching for Named Locations ecceeee eee tener etna ener 21 Searching for Locations by Coordinates Great for GPS UserS c eeeeeeeee eens etree 22 Viewing Three Dimensional Maps cccee ence enter eee e nee ene nent nnn nr nannnnns 23 Viewing a Map Area in Three Dimensions cccceeeec cece eee eee tenet ee neeeeeeneeenae eens 23 Navigating in the Three Dimensional View ccccceeeeeee cece ee eee ee eeeeeeeeeeeeneeeennaee eae 24 Viewing a Fly Over of a Route in Three Dimensions c cece eee e cnet ee eeeeeeeeeeeaae eens 24 Keeping National Parks Explorer 3D Up to Date cc ceeceee eee tenet eee ee ee teat ee nn nn 25 Updating the Software some ena e eee a a ene eee tas 25 Creating and Using Routes ooocccocccccocccconcncnnnnccnn cnc narran nn nr narrar nnn need 26 Drawing a ROUTC cio A feel ee ars den ME eae le PLA ee eae ee 26 Measuring and Displaying Distance ccccccee cece eee eee eee eee teense ee anna 27 Determining Distance at a GIANCE cece cece e eee e ee eee ents cent tenant ranas
18. GRAPHICAL DATA IN NO EVENT WILL NATIONAL GEOGRAPHIC AND ITS DIRECTORS OFFICERS OR EMPLOYEES BE LIABLE TO YOU FOR ANY CONSEQUENTIAL INCIDENTAL OR INDIRECT DAMAGES INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION AND LOSS OF BUSINESS INFORMATION ARISING FROM THE USE OR THE INABILITY TO USE THE SOFTWARE AND THE ACCOMPANYING WRITTEN MATERIALS 2 Exclusive Remedy Your exclusive remedy as well as National Geographic and its suppliers entire liability arising from or in connection with the Software Documentation Reproduction and or this License will be the refund of the license fees or the replacement of defective components of the Software In no event will National Geographic total liability for any damages direct or indirect in connection with the product the product documentation and or this License exceed the license fees paid for your right to use this copy of the product whether such liability arises from any claim based upon contract warranty tort or otherwise 2006 National Geographic All Rights Reserved NATIONAL PARKS EXPLORER 3D NATIONAL PARKS EXPLORER 3D is a trademark of National Geographic TOPO is a registered trademark Welcome to National Parks Explorer 3D Thank you for purchasing a TOPO Interactive Map product These products feature high quality digital maps powered by state of the art map browser software This user guide is intended to familiarize yo
19. Menu or click the Note button 2 Position the cursor and left click on the map 3 Enter text in the note dialog box and click OK 4 National Parks Explorer 3D places the text label at your cursor s location To move a note 1 Choose a note by positioning your cursor over it 2 Hold down the left mouse button and drag To change the appearance of a note 1 Choose a text label by positioning your cursor over it 2 Click the right mouse button to access the pop up editor see Appendix A Pop up Editors on page 52 3 To edit a note label change the text 4 To change the note symbol click on the symbol icon 5 To change the size or font of the text choose Modify Style 6 To change the color of the text choose Modify Style 7 To toggle the backdrop on or off use the Backdrop checkbox To copy and delete notes see Appendix B Modifying and Deleting Objects on page 53 Changing the Color and Style of Routes The color or style of a route cannot be changed in the current version of this software e To add routes to the map see Drawing a Route on page 26 e To edit routes see Extending or Shortening a Route on page 27 e To copy and delete routes see Appendix B Modifying and Deleting Objects on page 53 Placing Text and Symbols on Top of Other Custom Objects You can place notes on top of other routes symbols text labels or direction lines without selecting the custom object below This can
20. National Parks Explorer 3D User Guide Version 4 3 for Windows NATIONAL GEOGRAPHIC Document Version 1 Table of Contents National Parks Explorer 3D End User License Agreement ecceeee tees eeeeeaeeeaeeeeeeaes 5 Welcome to National Parks Explorer 3D ccceeeeeee eens eee test eee eee teat seas tees eee enee nae 10 Installing and Running National Parks Explorer 3D cccceceeee eens eens sees teas tees rererere 11 For People Who Don t Read Manuals eceeeee eee estes eens eens eee seas eeaeeeeetneeeaeeas 12 POP UP ii A A naey Cre Ea nee chu a aaa aT 12 Using TO Status BA aid 12 Quick Guide to Printing esena a a r eE a A T Ea E Ta AE Eaa 13 Accessing Information and Getting Help 0oococcoccccoccccnnnnccnncncnnnncn nn nn rn rra 14 Accessing OTOMANO a 14 Status Bar Help mistica tt 14 On S r en ins it A AR tetera Ea 14 Technical Support and www nationalgeographiC COM OPO oooccocccccccnncnnnnnnnnnnanencnnnnnns 15 Managing Your Maps and Saving Your Work ooococccccccccconcccnnnnccnnnacannncnnn arrancan ranas 16 Opening and Saving tpo DOCUMENTS cococcocccconnnccnnnncnncncnnn arca narran enna nn r rr rrnnnanns 16 Merging tpo DOCUMENTS cece cece nnn rre rr rr rr 17 Deleting Custom Objects from a tpo file cece ccc cee cece e cnet eee ee eeeeeeeaeeenaeeenanees 17 Navigating and Searching the Park Maps ceeee eee e eee cette eee eee a eee tenet ene eae ea 1
21. S Department of Commerce or other government agency before it may be taken or sent outside of the United States Licensee agrees to obtain any required license before taking or sending the Software outside the United States Licensee will not permit the export or re export of the Software without obtaining required licenses of letters of further assurance 7 Governing Law This agreement will be governed by and interpreted in accordance with the laws of the State of California of the United States of America as applied to transactions entirely within California between California residents 8 Entire Agreement This agreement sets forth the entire understanding and agreement between National Geographic and you and may be amended only in a writing signed by both parties NO VENDOR DISTRIBUTOR DEALER RETAILER SALES PERSON OR OTHER PERSON IS AUTHORIZED TO MODIFY THIS AGREEMENT OR TO MAKE ANY WARRANTY REPRESENTATION OR PROMISE WHICH IS DIFFERENT THAN ORIN ADDITION TO THE REPRESENTATIONS OR PROMISES OF THIS AGREEMENT 9 Waiver No waiver of any right under this agreement will be effective unless contained in writing signed by a duly authorized representative of National Geographic and no waiver of any past or present right arising from any breach or failure to perform will waive any future right arising under this agreement 10 Severability If any provision in this agreement is invalid or unenforceable that provision will be interpre
22. a GPS Receiver ocooccoccccnnncnnncnnccnnccnnnnnnnnnnn rr nnrrnrr rn nnnnnnnnrrnrrrnrnrnnnss 44 Setting up National Parks Explorer 3D and Your GPS Receiver for Connecting 45 Uploading to a GPS Receiver Export Wizard cceceeeeeeee tees tees eee eae nenene 46 Downloading from a GPS Receiver Import Wizard ccceeeeeeeeee eee tees teat test eaeeeas 47 Tracking your Position in Real Time ccecceeee eee e eee eee eee e tee eee ena nr rr rr 48 Saving GPS Data levante sacarina besa e bad pnl a Ta 49 Importing Exporting GPS Geocache InformatiOn ccecceeee eee e eee eee tees teat test eaeeas 50 Linking Notes to Maps soci A a 51 Adding Notes to the Map ooocccoocccconccconcncnnnnccnnnncnn nn nn nnn nn nde need 51 Editing ANOIS tense haste a AR RR NOAA sakes tas 51 Opening and Closing the Notes VieW ccceeee eee e eee eee eee eee teeta eee ented 51 Appendix A Pop up Editors 0 c cece ence ence eee eee nee nee eee ene AA EAE tee teeta ena 52 Appendix B Modifying and Deleting Objects icceee cece eee eee e eee teat teat tees teat eaten 53 Deleting ODE adiciona 53 Appendix C Preference Settings ooooooocoonccnnccnnnnonnnnnnnnnnnnnrnr e ee ena nr nrnrnr nr rrn rr 54 Uni AA E E E 54 Coordin eS 3 44 a lata E E A 55 Distantes ea a a a a a aa eaaa ai a beaded 55 El VAINA AEE EE ES a AAA EEE EN 55 A A tutus teaming antacid A ae i toads Te 55 COMPASS
23. and parks contained in the program To access information about the maps and parks click the Parks button tril on the toolbar or choose View PDF Park Guide from the Info menu A PDF file opens in Adobe Reader displaying the table of contents for this park guide Status Bar Help Please see Using the Status Bar on page 12 On Screen Help In addition to this Users Guide National Parks Explorer 3D provides on screen help for reference while you are using National Parks Explorer 3D From a list of topics you can access the information contained in this User s Guide To use the on screen help 1 Choose User Guide from the Info menu or click the Help button z National Parks Explorer 3D displays an index of topics in Adobe Reader 2 Click the topic you want to view Technical Support and www nationalgeographic com topo Visit the TOPO home page for information about upgrades new regions and other related products http www nationalgeographic com topo If you encounter system errors or are having problems using National Parks Explorer 3D that are not discussed in this document or on the National Parks Explorer 3D web site you can contact National Geographic for technical assistance by email at topo ngs org or by telephone at 800 962 1643 We are eager to help Managing Your Maps and Saving Your Work National Parks Explorer 3D allows you to save any information you add to the maps The information is saved
24. atellites and display the coordinates of your position within a minute of turning it on outdoors If you are moving the GPS receiver will also report your heading and speed If you have entered waypoints into its memory the receiver can report how far away those locations are and in what direction Properly used a GPS receiver can help guide you to your destinations without getting lost To navigate to places you have never been before with your GPS you need to create waypoints for those places in advance and to do this you need the coordinates latitudes and longitudes of those places National Parks Explorer 3D is the easiest way to plan your GPS adventure just click on the map and National Parks Explorer 3D displays the coordinates for you TOPO a special version of National Parks Explorer 3D designed specifically for GPS users makes the process even easier after clicking down waypoints on the map you can link your GPS to your PC with a cable and transfer the waypoints automatically Note To learn more about GPS visit http www topo com or contact National Geographic To learn how to operate a particular GPS receiver please refer to the manual that came with it Coordinates Coordinates are the numbers and or letters that precisely describe positions on the Earth For more information about coordinates and coordinate systems see Determining Location and Reading Coordinates on page 39 Waypoints When a locatio
25. cale distance of a profile National Parks Explorer 3D displays this statistic as a number followed by an X This figure describes how much a profile has been stretched to fit the elevation profile window For example an exaggeration of 4X means that hills along the profile appear four times steeper than they actually are Tips If a route s net gain is positive the route ends at an elevation that is higher than the elevation where it began if negative the route ends lower than where it began It is possible to determine the grade of a section of profile by selecting and viewing it in greater detail see Identifying Points Along the Elevation Profile on the Map on page 33 To change between feet and meters or miles and kilometers see Appendix C Preference Settings on page 54 Identifying Points Along the Elevation Profile on the Map Tip Click on any point of the elevation profile graph to view the corresponding location on the map As you move the cursor over the profile National Parks Explorer 3D displays horizontal and vertical guides to help identify the distance and elevation of a particular point along the profile To identify a location on the map that corresponds with a point on the profile click on the profile at a point you wish to identify National Parks Explorer 3D place two yellow dots one on the map and one on the profile These yellow dots represent corresponding locations Each time you clic
26. cation that is for sale resale or that contains paid advertisements Stand Alone Electronically Exported Graphic Files You may use the Software to create and distribute Reproductions in a standard electronic graphic format i e TIFF JPEG or BMP files via e mail and removable storage devices subject to the following requirements reproductions are distributed freely without charge for the Reproductions themselves in a non commercial manner for personal use the National Geographic copyright notice appears in legible form reproductions are in a view only format that does not include electronic metadata or header information that enables the Reproduction to be read as spatial data in 3 party software applications Graphic Files Embedded in Electronic Documents i e PDF GIS CAD and PPT files You may use the Software to create and distribute Reproductions in electronic documents such as PDF GIS CAD and Power Point files via e mail electronic media and removable storage subject to the following limitations the document is distributed freely without charge for the document itself does not contain more than 5 Reproductions contains information not provided in the original product from National Geographic is not intended to be a source of data for use separate from the document the National Geographic copyright notice appears in legible form on or adjacent each reproduction in the following form Map created with National
27. d a coordinate value entered into the Coordinate Locator dialog box For example you could place an anchor point on a bridge and enter the coordinates of a summit and the Coordinate Locator will report the direction and distance between the two locations To determine the direction and distance to a distant landmark s location 1 Use the Compass Tool We to place an anchor point on the map see Measuring Direction on page 29 2 Choose Coordinate Locator from the View menu 3 Enter the latitude and longitude or UTM value for the desired destination point National Parks Explorer 3D displays the distance and direction from the anchor point to the new coordinate in the From field in the Coordinate Locator window Viewing Three Dimensional Maps Topographical maps typically depict terrain in two dimensions using topographical lines to represent elevation changes In National Parks Explorer 3D you can view routes and terrain in a three dimensions This set of features are useful in that they allow you to get a sense of what the terrain looks like from different vantage points ST lrehied ipo TOPO Map Leal Sol 4 Walls thini Map 4 98 a 518 lie EIE x F pir a Ty on AOL I E EA The 3D View in National Parks Explorer 3D appears to the left of the two dimensional map Viewing a Map Area in Three Dimensions To view an area on a map in three dimensions 1 Center the map in the appropriate location see page 20 a
28. d drive of a laptop computer When you run the National Parks Explorer 3D Installer a TPO_ DATA folder is created on your hard drive You should find this folder in the same directory as the National Parks Explorer 3D application probably in C TOPO Any folders that you copy from the CD ROM data folder into the TPO_ DATA folder will be accessible by National Parks Explorer 3D Each of the folders you copy must include all of its contents to work properly You do not need to copy all of the folders to your hard drive National Parks Explorer 3D will read any folders you do not copy from the CD ROM If you have enough space on your hard drive for all of the maps on the CD ROM you can copy the entire data folder from the CD ROM directly onto your hard drive usually C 1 How can get my GPS receiver to work with National Parks Explorer 3D If you are having trouble with a GPS connection or can t upload or download GPS data see Connecting to a GPS Receiver on page 44 If you still have trouble visit our support page at http www nationalgeographic com topo for information about particular brands and models of GPS receivers How can get more information about National Parks Explorer 3D Contact National Geographic Maps or visit http www nationalgeographic com topo If you encounter system errors or are having problems using National Parks Explorer 3D that are not discussed in this document or on the abo
29. d location updates to TOPO at regular intervals You might want to try this when searching for a trailhead or navigating on dirt roads Please be careful don t click and drive Displaying or marking your current position a single time 1 Connect your GPS receiver to your computer see Connecting to a GPS Receiver on page 44 Verify that your GPS receiver is locked on to at least 3 satellites and has a position fix Select Show Current GPS Position from the GPS menu to center the map and cross hairs on your position Or select Mark Current GPS Position from the GPS menu to record the position as a waypoint on the map Tracking your position continuously as you travel 1 Connect your GPS receiver to your computer see Connecting to a GPS Receiver on page 44 Verify that your GPS receiver is locked on to at least three satellites and has a position fix Select Setup Automatic Tracking from the GPS menu There are three options for how you want your track displayed and recorded You can choose any or all of them e Checking the Show Position checkbox will center the map on your location as often as you choose default every 5 seconds e Checking the Mark Position checkbox will create successively numbered waypoints on the map at your location as often as you choose default every 30 seconds Also check the Don t mark if position is within 500 feet of previous waypoint checkbox if you want to avoid creating lot
30. dinate system especially for navigating on land Instead of referencing imaginary grid lines on the globe UTM projects sections of the globe onto a flat surface Each of the 60 sections called zones cover 6 of longitude UTM zones start with zone number 1 which lies between longitude 180 the International Date Line and longitude 174 W and run east to zone 60 A UTM position is described by three elements the zone it is in an easting value and a northing value Eastings and northings measure how far into a zone a position is in meters Eastings are an east west measurement that corresponds to longitude Northings are a north south measurement that corresponds to latitude By comparing two UTM positions that are within the same zone you can determine how far apart they are on land the difference in their eastings tells you how far east in meters one position is from the other the difference in their northings tells you how far north in meters one position is from the other Reading Coordinates in National Parks Explorer 3D Look in the lower right corner of the status bar to find coordinate information By default coordinates are displayed in degrees minutes seconds using the latitude longitude coordinate system The default datum is the North American Datum of 1983 NAD83 This datum is essentially equivalent to WGS84 used by most GPS receivers Unless you have a specific need to change the datum you should leave it on its d
31. e been while using the GPS The coordinates of the last thousand or more positions are stored in a track log in the receiver s memory and are often displayed on the GPS screen as a series of bread crumb dots indicating the course you ve taken Most receivers that support tracks let you set the time and or distance interval between successive track points If you re using the GPS in acar you might want to record your position every 30 seconds on foot you might only want a point every two minutes To learn how to import your GPS track log into National Parks Explorer 3D to see where you ve been on the map see Downloading from a GPS Receiver Import Wizard on page 47 Creating GPS Routes A GPS route is a series of waypoints that are arranged in the order that you intend to travel Each route you create in National Parks Explorer 3D appears as a separate folder in the Waypoint List see below This section will describe two different methods for creating routes in TOPO To create a GPS route from a freehand route drawn with the Route Tool 1 Use the Route Tool to draw a route see Drawing a Route on page 26 2 Once your route is complete position the cursor over the route and right click the mouse to access Route Properties window 3 Select the GPS Details tab on the Route Properties window 4 Enter the following information Enter a number of waypoints Enter the number of waypoints you want to be placed on this route
32. e is a graph it shows the vertical gain and loss along the course of the route on the map The vertical axis shows elevation in feet or meters above sea level its units run along the left edge of the profile The horizontal axis shows distance from the start of the route in miles or kilometers its units run along the bottom edge of the profile Blue and green color bands indicate fixed units of elevation that vary from profile to profile depending on the amount of elevation change National Parks Explorer 3D displays the following statistics about the route below the profile e Total gain Figure proceeded by a plus sign The sum of all the uphill segments along the route e Total loss Figure proceeded by a minus sign The sum all the downhill segments along the route e Net gain Figure proceeded by an equal sign The difference in elevation between the end and the start of the route e Terrain distance National Parks Explorer 3D displays this in the status bar when your cursor is over the profile window It shows a distance from a route s start point to your cursor that includes the ups and downs along the route in addition to the horizontal distance Because terrain distance includes this vertical change as well as the horizontal change terrain distance more accurately reflects the true length of a route e Vertical Exaggeration This is a number that reflects the ratio between the vertical scale elevation and the horizontal s
33. e other party agrees to the terms of this License Agreement 2 Output Limitations Hardcopy Print outs This license grants you the right to create and reproduce an unlimited number of hardcopy Reproductions for your personal in house business or intra institutional use subject to the property rights notice and credit requirements set forth below We ask that the National Geographic copyright notice appears in a small but legible form on or adjacent to the reproduction in the following form For Maps Map created with National Parks Explorer 3D 2006 National Geographic For Profiles Profile created with National Parks Explorer 3D 2006 National Geographic NOTWITHSTANDING THE FOREGOING NOTHING HEREIN SHALL BE DEEMED AS A LICENSE TO USE THE NATIONAL GEOGRAPHIC OR NATIONAL PARKS EXPLORER 3D TRADEMARKS AS BRANDING ELEMENTS ANY BREACH OF THIS RESTRICTION SHALL CAUSE AN IMMEDIATE REVOCATION OF THIS LICENSE WITH PREJUDICE TO ANY OTHER REMEDIES AVAILABLE OR IN EQUITY You may distribute hardcopy Reproductions on paper as long as the Reproductions are distributed freely without charge in a non commercial manner and the National Geographic copyright notice appears in legible form or National Geographic is given legible credit as described in paragraph 1 of the Output Limitations section We ask that you obtain a supplemental license in writing from National Geographic before you reproduce any Reproductions in a publi
34. eb site We ask that you obtain a supplementary license in writing from National Geographic before you reproduce display or distribute more then 3 Reproductions as Graphic Images over the Internet or other electronic networks Please contact National Geographic for more details for extended use licenses at topo ngs org In many cases they are available free of charge NOTWITHSTANDING THE FOREGOING NG RESERVES THE RIGHT TO REVOKE THIS LICENSE AND REQUIRE IMMEDIATE REMOVAL IN THE EVENT NG DETERMINES IN ITS SOLE DISCRETSION THAT THE LIMITATIONS HEREIN HAVE BEEN EXCEEDED 3 Property Rights The Software Documentation and the Data that comprises the Reproductions are owned and copyrighted by National Geographic and or Geographic Data Technology Inc with all rights reserved You may make one copy of the Software for backup purposes The Software represents and embodies trade secrets of National Geographic and or its licensors These trade secrets are not licensed to you and any modification addition or deletion is prohibited You agree to take all reasonable steps to protect the Software from unauthorized copying or use 4 Term This License is effective until terminated This License and your right to use the Software terminate automatically if you violate any part of this agreement Should the Agreement be terminated you agree to return all copies of the Software Documentation and Reproductions furnished to you or made by you and all copie
35. efault setting Elevation appears to the right of the coordinates and is given in feet or meters above mean sea level in the North American Vertical Datum of 1929 Using the Coordinate Locator Please see Searching for Locations on 22 Using Grids Grid lines on a printed map allow you to easily identify your position when you obtain your coordinates from a GPS receiver National Parks Explorer 3D can provide either latitude longitude or UTM coordinate reference data scaled to your specifications Once activated your grid lines will automatically appear on printed maps To add grid lines to any map select Grid from the View menu Grid lines appear on the map Note To change map datum or coordinate display settings click Preferences and Settings click Units then click Coordinates To identify your position on a printed map using the grid lines 1 Use a GPS receiver to determine the coordinates of your current position 2 Find the grid lines for the latitude and longitude or UTM easting and northing that most closely match the coordinates you found in step 1 and follow those two lines to where they meet Your position on the map is near the intersection of the two lines 3 For more accuracy determine whether the coordinates of your position are above or below the latitude or northing grid line and left or right of the longitude or easting grid line This allows you to identify the grid box your positio
36. gion document 3 Click Save Tip To delete all the custom data you have added to a region of maps and start with a blank slate choose Delete Contents from the File menu Merging tpo Documents You can merge all custom routes symbols text labels direction lines from other tpo files into the tpo file you are currently viewing This can be useful if you have stored custom information in different files but wish to view all of it on the same map To merge another region tpo document into the current one 1 From the File menu choose Merge tpo The Open File dialog box appears displaying a list of tpo files 2 Choose a file and click OK Note The tpo file you choose to merge must either be from the same map region you are currently viewing or from a map region with overlapping coverage For example you can merge a Yosemite tpo file into another tpo file for the Yosemite CD ROM or into a tpo file for the TOPO California state product Deleting Custom Objects from a tpo file You can categorically delete all custom routes direction lines and or notes from a mapXchange tpo file by type of object This can be useful if you wish to simplify a tpo file or isolate certain types of custom objects For example you might want to share a custom map of a hike with another National Parks Explorer 3D user but first delete all the symbols in the tpo file so as not to give away your favorite fishing spots
37. he map or relative to the magnetic north pole that a compass points toward For more information see Appendix C Preference Settings on page 54 Radial Mode and Waypoint Mode The Compass Tool e can be used in two different modes e Radial Mode is useful when you want to measure the direction from one location on the map to several other locations The anchor point will remain fixed at point A when a direction line is created from point A to point B e Waypoint Mode is useful when you want to measure a series of directions along a zig zagging route ex from A to B then from B to C then from C to D etc The anchor point will move to point B when a direction line is created from point A to point B For more information on setting these preferences see Appendix C Preference Settings on page 54 Measuring and Displaying Direction To measure direction from an anchor point to your cursor 1 Choose Compass from the Tool menu or click the Compass button E 2 Position the cursor where you would like to place an anchor point 3 Left click to place an anchor point Once you have placed an anchor point on the map National Parks Explorer 3D displays the direction and distance from the anchor point to your cursor in the status bar National Parks Explorer 3D updates the display as you move your cursor Tip Once you place an anchor point you can move to nearby locations with the traveling cursor at the edge of the map or t
38. ion slider To change the velocity of the fly over click and move the Speed slider To start the fly over again click the Fly radio button Keeping National Parks Explorer 3D Up to Date This section describes how you can use Live Map Update This set of features allows you to easily keep National Parks Explorer 3D software up to date ensuring that you have the latest available software features improvements and mapping information Updating the Software National Parks Explorer 3D can automatically check to see if there is an available update of the software To do this 1 Be sure that your computer is connected to the Internet 2 Under the View menu click Preferences and Settings The Preferences dialog box appears 3 Click Live Update 4 Check the box named Keep my software up to date Each time you launch this software it will automatically connect to the National Geographic Map server and notify you if a more current version is available Creating and Using Routes The Route Tool 5 is essential for measuring distance customizing maps building elevation profiles and creating GPS routes Drawing a Route From the Tool menu choose Route or click the Route button Position the cursor over the map where you want the route to begin Left click and release the mouse to begin drawing a new route The pencil cursor will change from horizontal to an upright position to indicate that you are in drawing m
39. k National Parks Explorer 3D updates the yellow dots and display the distance from the start of the route to the yellow dot Resizing the Profile Window When elevation profiles are built they are scaled to fit in the profile window To see the entire profile in greater detail grab the horizontal splitter bar that separates the map and profile windows and drag it to resize it as you see fit Printing and Exporting Elevation Profiles You can print elevation profiles with a map Also you can copy profiles to the clipboard or save them to disk for use in other applications To print an elevation profile with a map 1 View a profile of a route in the Notes and Routes Pane 2 Select the Print Tool te Click the Print tab right hand side of the screen 3 Click Print National Parks Explorer 3D automatically prints the active profile with your map see Printing and Exporting Maps on page 35 Printing and Exporting Maps Maps can be printed to include any custom symbols text routes grids and GPS data you have added Obtaining Maps by Mail At any time you can purchase a large format topographic map of the park you are viewing in National Parks Explorer 3D Note that this feature requires an active Internet connection To do this 1 Run National Parks Explorer 3D and go to the park you are interested in 2 From the File menu click Maps by Mail 3 Follow the instructions on your screen Printing Basics T
40. ks next to items indicate options that are currently selected Choose an unchecked item to select it instead Units This group of settings includes three sections Coordinates Distance and Elevation National Parks Explorer 3D User Guide 2006 National Geographic Maps 54 Coordinates These settings allow you choose how coordinates are displayed and what map datum the coordinates are referenced to For more information about these settings please see Determining Location and Reading Coordinates on page 39 e Degrees Minutes Seconds Displays degrees followed by minutes and seconds e Degrees and Decimal Minutes Displays degrees and decimal minutes e Decimal Degrees Displays decimal degrees e UTM Displays Universal Transverse Mercator coordinates Distance This setting allows you choose how distance is displayed and measured Distance can be displayed in miles kilometers feet or meters Elevation This setting allows you choose how elevation is displayed and measured Elevation can be displayed in feet or meters above sea level Tools These settings allow you choose options for certain tools in National Parks Explorer 3D Traveling Choose the appropriate speed at which you scroll when you use the Traveling Tool in National Parks Explorer 3D This setting only affect maps that are already in memory and cannot change how fast maps load from your CD ROM drive Change this setting if National Parks Explorer 3D is scrol
41. l is set to Radial Mode see page 55 As you move the cursor the distance from the anchor point to the cursor is displayed in the left corner of the status bar When the cursor is exactly one mile from the anchor point click to draw a direction line Continue this process for at least eight different points spread in a circle Use the Route Tool s straight line mode to connect the ends of the directions line you have placed see page 26 You may then delete the direction lines and what remains should be polygon roughly one mile in diameter How can determine if a location such as a summit is visible from another location such as a trail intersection Draw a direction line using the Compass Tool byl from one of the locations on the map to the other see Measuring Direction on page 29 Then build an elevation profile from the pop up editor of the direction line see Building Elevation Profiles on page 32 Hold a straight edge such as a ruler or piece of paper up against the monitor or printed profile so that its edge passes through the start and end points of the profile If any land comes between the two locations out in the field you should see a portion of the elevation profile sticking up above the straight edge as well Note There may still be trees buildings or other obstructions between the two locations that are not accounted for by the elevation data corresponding to the ground How can load maps onto the har
42. ling the maps too quickly or too slowly Compass e Coordinate Display For a description of this setting please see page 55 e Coordinates Relative To Choose an appropriate reference point for coordinates Allows you to customize how direction is displayed and how the compass tool works You can toggle between the following True North the direction that most topographic maps are oriented toward straight up on the map or Magnetic North the direction most compasses point toward e Bearing Display Choose Full Circle to see your direction relative to all 360 degrees Choose Quadrant to see your direction relative 90 degree quadrants that correspond north south east or west e Compass Tool Mode e Radial Mode The anchor point remains fixed at point A when a direction line is created from point A to point B This is useful when you want to measure direction from one location on the map to several other locations e Waypoint Mode The anchor point moves to point B when a direction line is created from point A to point B This is useful when you want to measure a series of directions along a route GPS These settings pertain to GPS receivers data and connections For more information please see Connecting to a GPS Receiver on page 44 Live Updates For information about these options please see Updating National Parks Explorer 3D on page 25 Appendix D Tips Tricks amp Frequently Asked Questions What abo
43. miles and kilometers For more information see Appendix C Preference Settings on page 54 Extending or Shortening a Route Routes can be edited or revised using the Route Tool 1 Choose Route from the Tool menu or click the Route button 9 2 Position the cursor at either end of the route you wish to edit 3 When the cursor displays a symbol left click to begin editing 4 To extend a route continue drawing 5 To shorten a route hold the right mouse button while retracing back along the route to erase 6 Left click to finish editing Starting a Route on Top of Other Custom Objects You can start a route on top of other routes symbols text labels or direction lines without selecting the custom object below This can be useful if you wish to start a route from a specific location on the map where you have already placed a custom object 1 Choose Route from the Tool menu or click the Route button eo 2 Hold down the Ctrl key 3 Move the cursor over the object and begin drawing your route 4 Release the Ctrl key Measuring Direction Use the Compass Tool wa to measure direction and distance between any two points Direction is described using the 360 in a circle 0 north 90 east 180 south 270 west True North and Magnetic North National Parks Explorer 3D can display directions relative to True North the direction that most topographic maps are oriented toward straight up on t
44. n lies within Estimate your position within the box by comparing how far the four bounding grid lines are from the coordinates obtained in step 1 Using National Parks Explorer 3D with a GPS Receiver National Parks Explorer 3D is a great complement to GPS receivers This chapter begins with a brief introduction to GPS and some of the common terminology associated with it The sections following that explain how to create GPS waypoints and routes on National Parks Explorer 3D s maps connect your PC to your GPS receiver and upload export that information to the GPS You ll also learn how to download import information you ve collected with your GPS receiver and see it on TOPO s maps If you have a laptop PC you might want to try connecting it to your GPS to track your position while someone else is driving see page Connecting to a GPS Receiver on page 44 The final sections explain how to manage GPS data in National Parks Explorer 3D how that data is stored on the hard drive and how to share that data with other software applications A Quick Start Guide to GPS Global Positioning System or GPS consists of a network of 24 orbiting satellites that transmit precisely timed radio signals ground stations that control those satellites and handheld GPS receivers that use the radio signals to calculate your position on the earth Most handheld receivers on the market today will lock on to the signals needed from at least 3 s
45. n s coordinates are assigned a name and stored in National Parks Explorer 3D or in a GPS receiver it becomes a waypoint As Michael Ferguson author of GPS Land Navigation points out a waypoint is not a physical location on the ground but rather the coordinates that approximate that location The actual locations of waypoints created in National Parks Explorer 3D are usually within 25 meters of where they appear to be on the map Most GPS receivers today however are only accurate to about 100 meters When you arrive at your destination your GPS might still report that you have up to 0 05 miles to go Note Some Magellan receivers use the term landmark in the place of waypoint Routes and Legs Most handheld GPS receivers also support routes A route is a series of waypoints that have been linked in a certain order into a sequence of legs A leg is a straight segment going from one of the waypoints of the route to the next A route consisting of three legs will therefore have four waypoints Using routes makes it easier to navigate with your GPS when you intend to pass through several waypoints because your GPS will automatically switch to the next leg when you arrive at the previous leg s destination waypoint To learn how to create GPS routes in National Parks Explorer 3D see Creating GPS Routes on page 43 Tracks Another common feature of handheld GPS receivers is the ability to automatically keep track of where you v
46. name for the saved map image You can now open this image in other applications Note Maps saved as graphics files are for export to other applications and cannot be opened again in National Parks Explorer 3D Suggestions for Maps Too Large to Print on a Page There are many ways to get a large map in National Parks Explorer 3D to print using the smaller size of paper that your printer accepts Here are different methods you can try e Zoom out and try printing the region from a smaller scale map For example if you are trying to print a large portion of a 1 24 000 scale map see if printing the same region from a scale of 1 63 360 will give enough detail for your needs e Inthe Print Preview view choose a map magnification e g Reduce 75 see page 35 Customizing the Maps with Text Symbols and Routes National Parks Explorer 3D makes it easy to create custom maps Use the Note and Route tools to annotate the maps The pop up editor lets you customize an object s color font size width etc All information you add can be easily saved and deleted Information you add to the maps is included on National Parks Explorer 3D printouts and exports Adding Text to the Maps Use the Note tool to add text labels to the map After creating a text label you can edit how the text appears using the pop up editor Text labels can be easily moved and deleted To use the Note tool 1 Choose Note from the Tool
47. nd zoom in to the appropriate level see page 18 National Parks Explorer 3D User Guide 2006 National Geographic Maps 23 Under the View menu click 3D Map View or click the 3D button 30 The 3D view appears Note the compass at the top of the view indicating directions The view rotates from the center point on your map To set a specific vantage point for the 3D view move the cursor over the 2D map the cursor appears as a circle Click the exact location you have in mind National Parks Explorer 3D creates a 3D view from that vantage point To change the angle of the 3D vantage point click and move the Tilt slider To change the height of the 3D vantage point click and move the Elevation Slider Navigating in the Three Dimensional View To navigate in the three dimensional view use the Left right up and down arrows to move the viewpoint in the corresponding direction You may need to click the mouse in the 3D map view first before using the arrow keys to navigate Viewing a Fly Over of a Route in Three Dimensions To view a virtual fly over of a route in three dimensions 1 2 Draw a route in National Parks Explorer 3D see Drawing a Route on page 26 Right click the route and click 3D Fly Over The 3D map view opens depicting a virtual fly over of your route To change the angle of the 3D vantage point click and move the Tilt slider To change the height of the 3D vantage point click and move the Elevat
48. not see your specific model in the pull down menu choose None of the Above If you do not see your manufacturer in the pull down menu you can select one of the NMEA options and use National Parks Explorer 3D with a laptop for live tracking visit our web site at http www topo com to see if a new version is available that supports upload and download for your receiver 6 Optional Specify the maximum numbers for waypoints routes track routes etc These setting affect the output of data from the GPS device to National Parks Explorer 3D 7 If you have changed the baud rate i e transfer speed in your GPS receiver verify that the Baud Rate specified on the Preferences dialog box matches your GPS receiver s baud rate See your GPS receiver manual for more information about setting the baud rate 8 Verify that the Port specified on the Preferences dialog box screen is the same port you connected the cable to in step 1 If you aren t sure try each of the options in the pull down menu starting with COM1 and clicking Test GPS Connection each time 9 Click Test GPS Connection A properly connected receiver will send a message that includes the text OK You are now connected and ready to send and receive data If you do not receive this message try checking your cable connections restarting your receiver and repeating the above instructions If you continue to have trouble visit our web site at http www topo com
49. o distant locations on the overview maps You can also switch map levels by right clicking on the map your anchor point remains fixed at its location To draw a direction line between two points 1 Left click the Compass Tool button We or choose Compass from the Tools menu 2 Position the anchor cursor where you would like the direction line to start 3 Left click to place the anchor point 4 Left click again at the position where you would like the direction line to end National Parks Explorer 3D draws a direction line between the two points After drawing a direction line National Parks Explorer 3D displays the line distance and azimuth in a pop up text box and on the status bar when you place the cursor over the direction line To display direction in a text label on the map use the same method as displaying distance see Measuring and Displaying Distance on page 27 Tips To toggle between true north and magnetic north choose Direction Reference from a direction line s pop up editor see Appendix A Pop up Editors on page 52 or toggle the overall preference setting see Appendix C Preference Settings To build a profile or change the appearance of a direction line use see Appendix A Pop up Editors on page 52 Placing an Anchor Point on Top of Other Custom Objects You can place an anchor point on top of other routes symbols text labels or direction lines without selecting the custom object below
50. o print a map on your desktop printer 1 Center the map on the area you would like to print 2 Choose Print Map from the File menu or click the Print button 3 Inthe top right corner choose a map magnification e g Reduce 75 4 Click the Print button Using Page Setup Options Printer Type Paper Size Orientation and Margins Before clicking the Print button choose Page Setup from the File menu to set options for paper size and source as well orientation and margins These options include e To select a printer other than the current default printer click Printer in the lower right corner of the Page Setup screen Left click on the arrow on the right side of the Printer pull down bar to select a printer from the available options e Maps can be printed in either a Portrait or Landscape configuration by selecting the appropriate option on the Page Setup screen e Margin specifications are also displayed on the Page Setup screen To change any margin click on the current measurement to highlight it then type in your new specifications Exporting Maps Individual map selections can be exported to disk for use in other programs To export save an image of a map 1 Click File gt Print or Export Map or click the Print button wi The Print Preview dialog box appears 2 Click and point near the corners of the map to adjust the area as appropriate 3 Click the Save button 4 Choose a location and
51. ode The route automatically follows any existing trails on the map To draw elsewhere on the map hold down the Ctrl key while drawing PC and Mac When your route is complete left click to stop drawing In the Properties dialog box enter information about the route such as name and route display settings For straight line segments 1 3 4 Hold down the Shift key while drawing to start a straight segment The pencil cursor icon will be replaced by a targeting cursor Position the targeting cursor where you would like to end the straight line segment If you position the cursor at the edge of the screen the map scrolls automatically Release the shift key to end the line segment Click your mouse button To correct a mistake while drawing hold the right mouse button down and backtrack as far as necessary to erase Measuring and Displaying Distance Once you left click to finish drawing a route National Parks Explorer 3D automatically calculates the route s distance Note The distance calculated does not account for terrain and elevation changes If you wish to determine the actual terrain distance view the elevation profile Determining Distance at a Glance National Parks Explorer 3D displays the route distance on the status bar at the bottom of your screen when you place the cursor over any part of your route Changing the Distance Units from Miles to Kilometers You can toggle between
52. ows Click Start gt Programs gt TOPO gt National Parks Explorer 3D Choose a park and click GO in the welcome screen Installation for Mac OS 10 2 or Higher 1 Insert the Installer Disc 1 2 Double click on the National Parks Explorer 3D CD ROM icon when it appears on your desktop 3 Double click on the Install National Parks Explorer 3D icon 4 Follow the on screen instructions to complete the installation To run National Parks Explorer 3D on a Mac Open the TOPO folder in the Applications folder and double click on the National Parks Explorer 3D application For People Who Don t Read Manuals By reading this short chapter you will learn some of National Parks Explorer 3D s key features that are easy to miss GPS users should also browse Using National Parks Explorer 3D with a GPS Receiver on page 42 Pop up Editors Many of National Parks Explorer 3D s most important features like elevation profiling can only be accessed from pop up editors All objects that you add to maps routes direction lines and notes contain pop up editors that provide options These editors can be accessed by placing your cursor over an object and clicking the right mouse button down Don t miss them Properties El Route GPS Details e Hike to Half Dome 3D Fly Over Length 5 91 miles Show V GPS Waypoints Vv Use Backdrop Distance Tl Elevation GPS Name Omi 1 00 mi 2 00 mi 3 00 mi
53. play these coordinates in either of two coordinate systems latitude longitude or UTM Latitude Longitude Coordinate System The latitude longitude system is the most common coordinate system in use today Latitude describes how far north or south of the equator a location is lines of latitude circles that are parallel to the equator and to one another are also called parallels Longitude describes how far east or west of the Prime Meridian Greenwich England a location is lines of longitude half circles that extend from the north pole to the south pole are also called meridians A position in the latitude longitude system is described as being the intersection of a line of latitude and a line of longitude Latitudes go from 0 at the equator to 90 N at the North Pole and from 0 at the equator to 90 S at the South Pole Longitudes start at 0 at the Prime Meridian and run west to 180 W and east to 180 E where they meet The latitude is usually listed first then the longitude as in 37 76417 N 122 41194 W This example was given in decimal degrees but the same position could be given in degrees and decimal minutes as 37 45 850 N 122 24 717 W or in degrees minutes seconds as 37 45 51 N 122 24 43 W When using National Parks Explorer 3D with a GPS receiver be sure to set both of them to display in the same format UTM Coordinate System UTM or Universal Transverse Mercator is another commonly used coor
54. property of National Geographic This Software is licensed to you to serve as a general reference for your personal business or institutional use The geographical data used in the Software is based on Trails Illustrated topographic maps and USGS elevation data Please consider carefully the fact that the Software and the geographic data may not be adequate for purposes requiring precision in depiction of geographic features exact measurement of direction or distance or for similar purposes including but not limited to navigation tracking or emergency response This License grants you the right to use the Software on a single personal computer and a single handheld computer You may use the software on a secondary laptop computer in addition to your primary computer as long as the software is not used simultaneously on both your primary computer and your laptop This license does not authorize network use of any kind You may not decompile disassemble or use any method to discover the trade secrets contained in the Software You may not modify adapt translate rent lease timeshare or loan the Software You may copy elements of the Software onto the hard disk of your computer and load elements of the Software into RAM and the CPU of your computer You may transfer your rights under this Agreement by providing the recipient the Software and Documentation provided that you retain no copies of the Software or Documentation and that th
55. rger area of map with less detail To use the Zoom Tool 1 Choose Zoom from the Tool menu or click the Zoom button es 2 Position the magnifying cursor where you want to zoom in 3 Click the mouse to zoom in one level 4 Press the shift key on your keyboard and left click to zoom out one level Tip When you are using the Zoom Tool a symbol in the center of your cursor indicates that it is possible to zoom in A symbol in the center of the cursor indicates that it is possible to zoom out No symbol in the center of your cursor indicates maximum zoom Magnifying the Map This feature allows you to magnify or reduce the map currently being viewed It can be accessed while using any tool You can magnify the current map to better view a certain area and draw routes with greater precision You can also reduce the current map to get an overview of the area and view more of your custom work on screen Tip The Magnify Map feature changes the scale of the current map but not the level of detail It is useful for magnifying or reducing certain map areas where you are adding custom information To change the level of detail use the standard Zoom Tool see page 18 To magnify the map 1 Right click on the map to access the Pop up Zoom menu 2 Choose Magnify Map 3 Select one of the three Reduce levels 25 33 50 to get an overview of the current map OR 4 Select one of the three Magnify levels 200 30
56. s to National Geographic including copies resident in the computer s memory 5 U S Government Restricted Rights If this Software is acquired by or on behalf of any unit or agency of the United States Government this provision applies This Software a was developed at private expense and no part of the software application was developed with government funds b is a National Geographic trade secret for all purposes of the Freedom of Information Act c is restricted computer software submitted with restricted rights in accordance with 52 227 19 a through d of the Commercial Computer Software Restricted Rights Clause and successors d in all respects is proprietary data belonging solely to National Geographic and e is published and all rights are reserved under the copyright laws of the United States For units of the Department of Defense DOD this Software is licensed only with Restricted Rights as that term is defined in the DOD Supplement to the Federal Acquisition Regulations 52 227 7013 c 1 iii and its successors Use duplication or disclosure of the Software by the Government is subject to restrictions as set forth in subdivision b 3 ii of the Rights in Technical Data and Computer Software clause at 252 227 7013 of the DOD FAR Contractor manufacturer is National Geographic 212 Beaver Brook Canyon Evergreen CO 80439 6 Export Laws Licensee understands that the product may require a license from the U
57. s of waypoints in the same place when you are stationary e Checking the Trace out a continuous freehand route checkbox will connect your movements on the map with a single continuous route in the current default color and style Before you begin you may wish to test the connection with your PC by clicking Test GPS Connection Click Start Tracking 6 To stop tracking toggle the GPS Options button a on the toolbar or deselect Setup Automatic Tracking from the GPS menu Note If you are having trouble make sure that your receiver is tracking enough satellites and has a valid position fix Also see Connecting to a GPS Receiver on page 44 Saving GPS Data National Parks Explorer 3D s tpo files allow you to save and organize different sets of custom data These files are the perfect place to store waypoints and routes that you might want to use at a later date They allow you to clear your GPS receiver s memory and have only the waypoints and routes loaded for your current trip If you want to share GPS data with other National Parks Explorer 3D users save a tpo file to a CD R or attach it to an e mail Saving GPS waypoints and or GPS routes From the File menu select Save Map or Save Map As This saves all your current waypoints and routes in a tpo file for later reference For example you could maintain individual tpo files to keep track of GPS waypoints and routes for each of your favorite hiking trails
58. t to save your data in a tpo file that can be e mailed or copied to disk see Saving GPS Data on page 49 Exporting GPS information from National Parks Explorer 3D to a gpx geocache file 1 From the File menu click Export GPX Geocache 2 Specify a name and location for this file 3 Click Save Importing GPS information from a gpx geocache file to National Parks Explorer 3D 1 From the File menu click Import GPX Geocache 2 Choose this file 3 Click Open Linking Notes to Maps Use the notes tool to annotate the maps When you place a note on the map the note is displayed in the notes pane and as an icon the map A single note may contain text photo and location information Adding Notes to the Map 1 Choose Notes from the Tool menu or click the Notes tool 2 Position the cursor and click on the map The Note Properties window appears 3 Enter a map label text note a URL link and or attach a digital photo from this editor window Editing a Note To edit a note right click the note icon on the map or in the Note and Route List Opening and Closing the Notes View To close or reopen the Notes view choose Note and Route List from the View menu Appendix A Pop up Editors Any custom information you add to a map in National Parks Explorer 3D routes direction lines and notes can be thought of as objects All objects contain pop up editors that provide options To access a pop up edi
59. ted limited modified or if necessary severed to the extent necessary to eliminate its invalidity or unenforceability and the other provisions of this agreement will remain unaffected Limited Warranty and Warranty Disclaimer 1 Limited Warranty and Warranty Disclaimer National Geographic warrants the disk on which the Software is to be distributed to be free from defects in materials and workmanship and that the unaltered Software will perform substantially in accordance with the documentation for a period of 90 days from the date you purchased the license to the Software Any written or oral information or advice given by National Geographic dealers distributors or employees will in no way increase the scope of this warranty National Geographic makes no other warranties express or implied including without limitation the implied fitness for a particular purpose regarding the Software National Geographic does not warrant guarantee or make any representations regarding the use or the results of the use of the Software in terms of its correctness accuracy reliability currency or otherwise You assume the entire risk as to the results and performance of the Software THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHT YOU MAY HAVE OTHERS WHICH VARY FROM JURISDICTION TO JURISDICTION NATIONAL GEOGRAPHIC IS IN NO WAY RESPONSIBLE FOR PERSONAL INJURY OR DAMAGE TO PROPERTY IN CONNECTION WITH THE USE OF ITS SOFTWARE OR GEO
60. tor 1 Select an object by placing your cursor over it The cursor changes to a hand symbol 2 Click the right mouse button and the editor will appear Appendix B Modifying and Deleting Objects Most objects you add to a map in National Parks Explorer 3D can be displayed on all map levels or deleted entirely Deleting Objects Any objects you add to a National Parks Explorer 3D map can be deleted by selecting Delete from the pop up editor To delete an object using the option menu 1 Choose the object you wish to delete by positioning your cursor over it 2 Right click on the object and select Delete from the pop up editor Reminder Deleted objects are permanently deleted Save multiple versions of a tpo file on your hard drive if you want to be able to go back to an earlier version later Appendix C Preference Settings The Preference dialog box lets you customize tool settings display options and units of measure To display this dialog box from the View menu click Preferences and Settings Preferences Display Coordinates Datum f C Degrees Minutes and Seconds C NAD27 ba eling Degrees and Decimal Minutes NAD83 WGS84 CEPIS C Decimal Degrees GPS C UTM Receiver Time Format oe Display Distance Display Elevation Miles Feet above mean sea level Kilometers Meters above mean sea level Feet Meters la cre Preferences dialog box Checkmar
61. u with the map browser software National Parks Explorer 3D software provides everything you need to navigate explore and print customized topographic maps National Parks Explorer 3D makes it easy to measure distance and direction build elevation profiles determine coordinates and print customized maps Pe SA IPIN 119 30 698 W 5988 ft Note We strongly recommend that all users read For People Who Don t Read Manuals on page 12 GPS users should at least browse Customizing the Maps with Grids on page 39 and Using National Parks Explorer 3D with a GPS Receiver on page 42 To get help with National Parks Explorer 3D see Accessing Information and Getting Help on page 14 National Parks Explorer 3D User Guide 2006 National Geographic Maps 10 Installing and Running National Parks Explorer 3D Installation for Windows 95 98 2000 ME NT or XP Use the National Parks Explorer installer setup exe to install TOPO It places the TOPO application and other TOPO files on to your hard drive To install 1 Insert the Installer Disc 1 into your CD ROM drive Choose Run from the Windows Start menu 2 Enter D Setup exe if your CD ROM is not drive D substitute the correct drive letter in place of D 3 Click OK 4 Follow the instructions on your screen The Install Wizard places TOPO and other necessary files on your hard drive To run National Parks Explorer 3D on Wind
62. ut updates To update your maps and National Parks Explorer 3D see Updating National Parks Explorer 3D_ on page 25 As new paper maps and data become available National Geographic will provide upgrades Be sure to return the product registration card included with this product It will insure that you are notified as upgrades become available Upgrades will be available on CD ROM and downloadable from the Internet Visit http www nationalgeographic com topo for update information Why won t National Parks Explorer 3D work with my printer Your printer must be compatible with supported operating systems and support printing of grayscale or color graphics to work with National Parks Explorer 3D How can reverse the direction of an elevation profile National Parks Explorer 3D builds elevation profiles from the start point of a route to the end point You can reverse the direction that a profile builds by adding a small segment of route to the start point and then rebuilding the profile see Creating and Using Routes on page 26 What if the map want to print is larger than a page There are several ways to print a large region of map from National Parks Explorer 3D See Suggestions for Maps Too Large to Print on a Page on page 36 How can I find everything within a one mile radius of a central point Use the Compass Tool ES to place an anchor at the central point From the Preferences dialog box be sure that the Compass Too
63. ve web site you can contact National Geographic for technical assistance by email at topo ngs org or by telephone at 800 962 1643
64. vue aid 35 Using Page Setup Options Printer Type Paper Size Orientation and Margins 35 EXDOmiNG MAPS A A A A AOS 36 Suggestions for Maps Too Large to Print On a Page 0oooccocccncccncncnnanonannnnnnncnnnrnnnos 36 Customizing the Maps with Text Symbols and Routes 00cccooccccnccccnncncnnnnccnn cnc nn ncnnn nn 37 Adding Text to the Maps vecina A a Ad 37 Changing the Color and Style of Routes oooccocccccccncconnnnnnnnnnnnncnnnrnnnnrnnnrrrnrrrnnnrnnnns 38 Placing Text and Symbols on Top of Other Custom ObjectS oocococccoccncnnnnncnnncnnnrnnnnos 38 Customizing the Maps with GridS oooocooccconcccnccnncnnncnnnnnnnnnnnn rr nnn rn nnnnrnn eaters 39 Determining Location and Reading COOrdiNates ocoooccocccocccnnncnnnnnnanonnnnnrnnnrnnnrnnans 39 Latitude Longitude Coordinate System 0ooococccoccconcnoccnnncnnnnnnnnnnannnn nn nr nr rrnnnrnnnns 39 UTM Coordinate SysSteM ooooccoocconccnnncnnncnnnnnnnnnnnnnnnnnrrnnrrnrnr rn nnrrrnrrrnrrrnrnrnnnnn 40 Reading Coordinates in National Parks Explorer 3D oooococccocccccccnnconnnnnnnnnnnnnrnnnrnns 40 Using the Coordinate Locator mesisan a i a aa a eaeh EEs 40 USING A eaaa ead Fan A AA fen AE E dae S AA OEA on CRE aE 41 Using National Parks Explorer 3D with a GPS Receiver 0oooccoccccccconccnnnonnnnnnnnnncnnnrnnarnnans 42 A Quick Start Guide to GPRS eer raren iia dead aa a 42 Cr ating GPS ROUES sirr eoe naa Ae EE EELEE EEn EEn eE e i EEEE selene 43 Connecting to
65. ypoints and routes you have created in National Parks Explorer 3D to your receiver so that you can later navigate to those places using the GPS A direct connection also allows you to download waypoints routes and tracks of places you have been from your receiver directly onto National Parks Explorer 3D s maps If you have a laptop computer you can also use the direct connection to see your current location continuously updated on a moving map display Note Connecting requires a GPS receiver that supports PC upload download and a compatible PC cable available from GPS retailers or manufacturers contact National Geographic for help locating a dealer near you Setting up National Parks Explorer 3D and Your GPS Receiver for Connecting 1 Attach one end of your PC cable to your GPS receiver and the other to an available communications port on your PC See your GPS receiver manual and your PC manual for more information about cable connections and communication ports 2 Power on your GPS receiver 3 If you are using a Garmin GPS check that your receiver s interface mode is set to Garmin or GRMN GRMN See your Garmin manual for more information about setting the interface mode 4 In National Parks Explorer 3D choose Change GPS Settings from the GPS menu The GPS Receiver Settings dialog box appears 5 Click Receiver Choose a Make and a Model In most cases this information will suffice If you do

National Parks Explorer 3D User Guide

Contents

Download Pdf Manuals

Related Search

Related Contents