Home

5 Configuration - D-Link

Contents

1. Figure 5 33 VLAN gt Voice VLAN gt Voice VLAN Port Settings From Port To Port A consecutive group of ports may be configured starting with the selected port Auto Detection Switch will add ports to the voice VLAN automatically if it detects the device OUI matches the Telephony OUI configured in Voice VLAN OUI Setting page Use the drop down menu to enable or disable the OUI auto detection function The default is Disabled Tagged Untagged tagged or untagged the ports Click Apply to implement changes made and Refresh to refresh the voice vlan table y Note Voice VLAN has higher priority than any other features even QoS Therefore the voice traffic will be operated according to Voice VLAN setting and not impacted by QoS feature amp Note It is recommended setting the highest priority for Voice VLAN to guarantee the quality of 34 5 Configuration D Link Web Smart Switch User Manual VoIP traffic VLAN gt Voice VLAN gt Voice Device List The Voice Device List page displays the information of Voice VLAN Voice Device List pot AI H _ serch iD Port AC Address Priority Type e Figure 5 34 VLAN gt Voice VLAN gt Voice Device List Select a port or all ports and click Search to display the Voice Device information in the table VLAN gt Auto Surveillance VLAN Similar as Voice VLAN Auto Surveillance VLAN is a feature that allows you to automatically place the video
2. Both authorization and encryption are required for packets sent between the Switch and SNMP manger Notify View Name Specify a SNMP group name for users that can receive SNMP trap messages generated by the Switch s SNMP agent SNMP gt SNMP gt SNMP View The SNMP View page allows user to maintain SNMP views to community strings that define the MIB objects which can be accessed by a remote SNMP manager View Name I Subtree OID ee OID Mask _ View Type included J 7 indicates mandatory data Add a I OID Mask View Type Delete 1 1 ReadWrite Included Delete Figure 5 97 SNMP gt SNMP gt SNMP View Table View Name Name of the view up to 32 characters Subtree OID The Object Identifier OID Subtree for the view The OID identifies an object tree MIB tree that will be included or excluded from access by an SNMP manager OID Mask The mask of the Subtree OID 1 means this object number is concerned 0 means do not concerned For example 1 3 6 1 2 1 1 with mask 1 1 1 1 1 1 0 means 1 3 6 1 2 1 X View Type Specify the configured OID is Included or Excluded that a SNMP manager can access Click Add to create a new view Delete to remove an existing view SNMP gt SNMP gt SNMP Community The SNMP Community page is used to maintain the SNMP community string of the switch SNMP managers using the same community string are permitted to gain access to the Switch s SNMP agent Community Name
3. Gateway 0 0 0 0 Ignore the wizard next time Exit Figure 5 1 IP Information in Smart Wizard Password Settings Type the desired new password in the Password box and again in the Confirm Password then click the Next button to the SNMP setting page 18 5 Configuration D Link Web Smart Switch User Manual Welcome to Smart Wizard 7 Step 2 of 3 Set up the password for authorized access Password Figure 5 2 Password setting in Smart Wizard SNMP Settings The SNMP Setting allows you to quickly enable disable the SNMP function The default SNMP Setting is Disabled Click Enabled and then click Apply to make it effective Welcome to Smart Wizard Step 3 of 3 Enable SNMP for management Figure 5 3 SNMP Setting in Smart Wizard NOTE Changing the system IP address will disconnect you from the current connection Please enter the correct IP address in the Web browser again and make sure your PC is in the same subnet with the switch See Login Web based Management for a detailed description 19 5 Configuration D Link Web Smart Switch User Manual If you want to change the IP settings click OK and start a new web browser Windows Internet Explorer EJ Use new IP address to connect to device Figure 1 Confirm the changes of IP address in Smart Wizard P The browser will be disconnected Web based Management After clicking the Exit button in Smart Wizard yo
4. Active Long 90 sec 21 Active Long 90 sec 22 Active _Long 90 sec 23 Active __ 1 _Long 90 sec 24 Active Long 90 sec 25 Active Long 90 sec 26 Active Long 90 sec 27 Active Long 90 sec Figure 5 44 L2 Functions gt Link Aggregation gt LACP Port Settings From Port The beginning of a consecutive group of ports may be configured starting with the selected port To Port The ending of a consecutive group of ports may be configured starting with the selected port Activity There are two different roles of LACP ports Active Active LACP ports are capable of processing and sending LACP control frames This allows LACP compliant devices to negotiate the aggregated link so the group may be changed dynamically as needs require In order to utilize the ability to change an aggregated port group that is to add or subtract ports from the group at least one of the participating devices must designate LACP ports as active Both devices must support LACP Passive LACP ports that are designated as passive cannot initially send LACP control frames In order to allow the linked port group to negotiate adjustments and make changes dynamically one end of the connection must have active LACP ports Timeout Specify the administrative LACP timeout The possible field values are Short 3 Sec Defines the LACP timeout as 3 seconds Long 90 Sec Defines the LACP timeout as 90 seconds This is the def
5. F User Name View Policy ReadOnly 7 indicates mandatory data Add Delete public ReadOnly Delete private ReadWrite Delete Figure 5 98 SNMP gt SNMP gt SNMP Community 70 5 Configuration D Link Web Smart Switch User Manual Community Name Name of the community string User Name View Policy Specify the read write or read only level permission for the MIB objects accessible to the SNMP community Click Add to create a new SNMP community Delete to remove an existing community SNMP gt SNMP gt SNMP Host The SNMP Host page is to configure the SNMP trap recipients SNMP Host Table Seu Host IP Address _ P SNMP Version V1 v ee EE SNMPv3 User Name Apply Host IP Address SNMP Version Community Name SNMPv3 User Name Figure 5 99 SNMP gt SNMP gt SNMP Host Host IP Address Specify the IP address of SNMP management host SNMP Version Specify the SNMP version to be used to the management host Community String SNMPv3 User Name Specify the community string or SNMPv3 user name for the management host Click Apply to create a new SNMP host Delete to remove an existing host SNMP gt SNMP gt SNMP Engine ID The Engine ID is a unique identifier used to identify the SNMPv3 engine on the Switch Input the Engine ID then click Apply to apply the changes and click Default resets to default value Engine ID 4447532d313530302d3238 Default Apply 7 Engine ID length is 10 64 the accepted
6. No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit _ NoLimit No Limit No Limit No Limit No Limit Figure 5 70 QoS gt Bandwidth Control From Port To Port A consecutive group of ports may be configured starting with the selected port Type This drop down menu allows you to select between RX receive TX transmit and Both This setting will determine whether the bandwidth ceiling is applied to receiving transmitting or both receiving and transmitting packets No Limit This drop down menu allows you to specify that the selected port will have no bandwidth limit Enabled disables the limit Rate 64 1024000 This field allows you to enter the data rate in Kbits per second will be the limit for the selected port The value is between 64 and 1024000 Click Apply to set the bandwidth control for the selected ports QoS gt 802 1p DSCP QoS is an implementation of the IEEE 802 1p standard that allows network administrators to reserve bandwidth for important functions that require a larger bandwidth or that might have a higher priority such as VoIP voice over Internet Protocol web browsing applications file server applications or video conferencing Thus with larger bandwidth less critical traffic is limited and
7. lt mr brm mc a FEN EA a Fes am Em Fam PFa es ipp Lo ra rip ra bb Toi me UE ig mm r mg F au ee jepun m Se I ERIN G E ee B rwm bee berri a Pee oe ne gg P T Ah a IP OP i um _ Ui bu rire mii BE i m Eg pa pe mej FM dymod To bm Leu Iy i nan D Link Web Smart Switch User Manual Y HERES TER Far ry I atlas A ies Bae aH nm Hd da com En Ud SE miian hum cn wyb ed opie ti lese I I we i Ria mg ui byg lee Fm et Hyn ad PEEN JE ee eg WE O yw ee nn an TT Y I y aj 1 ml i Elyn i Ellyll yg Hii pee ee ey bwm ud i ng r eld Fly re ad BER bF p oe Md TL NU ymu rp i n TH y y HT Li Fd pp Pe j l mw a pj ipee p E cul mw gwn ee gy dym Ur LEM gu gwgu egu ee ML LI yu pr y NU ON ad Fw ed oe ee ee Y DEU ee ee ad genau a EE nd LL la aay ibris Bai Fi eee UU hh ee ee ee ee am a ee pm gu es ee es Y gS ie eee oR F im ects Be Emm eim i NI a Pg mw ee TT a mh a Bd bnm Meg oe Ss rr Soe ee Pui eee ee Figure 5 15 User Guide Micro Site 5 Configuration D Link Web Smart Switch User Manual Function Tree All configuration options on the switch are accessed through the Setup menu on the left side of the screen Click on the setup item that you want to configure The following sections provide more detailed description of each feature and function gt DGS 1500 28 p System System Settings 3
8. traffic from D Link IP cameras to an assigned VLAN to enhance the IP surveillance service With a higher priority and individual VLAN the quality and the security of surveillance traffic are guaranteed The Auto Surveillance VLAN function will check the source OUI MAC address VLAN ID on the incoming packets If it matches specified MAC address VLAN ID the packets will pass through switch with desired priority Auto Surveillance VLAN Global Settings Auto Surveillance VLAN C Enabled Disabled VLAN ID Priority Tagged Uplink Downlink Port i High E C Ex 124 8 Apply User defined MAC Settings To add more device s for Auto Surveillance VLAN by user defined configuration as below Component Type Description XX XX XX XX XX XX Po fc Ace 7 Maximum number of user defined MAC is 5 entries iD Component Type MAC Address D Link Surveillance Device D Link IP Surveillance Device F0 7D 68 00 00 00 Auto Surveillance VLAN Summary ReTresn Component Type Figure 5 35 VLAN gt Auto Surveillance VLAN Auto Surveillance VLAN Global Settings Auto Surveillance VLAN State Select to enable or disable Auto Surveillance VLAN The default is Disabled VLAN ID By default the VLAN ID 4094 was created as Auto Surveillance VLAN You also can create another Auto Surveillance VLAN by selecting a VLAN ID that you have created a VLAN from the 802 1Q VLAN page The member port you configured in 802 1Q
9. 65535 i P Port I Buckets Requested 1 50 _ Interval 1 3600 _ _ sec 7 indicates mandatory data Add index Port BucketsRequested Buckets Granted interval Owner Delete Figure 5 103 SNMP gt RMON gt RMON History The History Control Configuration contains the following fields Index 1 65535 Indicates the history control entry number Port Specifies the port from which the RMON information was taken Buckets Requested 1 50 Specifies the number of buckets that the device saves Interval 1 3600 Indicates in seconds the time period that samplings are taken from the ports The field range is 1 3600 The default is 1800 seconds equal to 30 minutes Owner Displays the RMON station or user that requested the RMON information Click Add to make the configurations take effects SNMP gt RMON gt RMON Alarm The RMON Alarm Configuration page allows the user to configure the network alarms Network alarms occur when a network problem or event is detected me I II Alarm Index 1 65535 _ P Interval 1 2 31 1 sec Variable _ F Sample type Absolute value Rising Threshold 0 2 31 1 jse Falling Threshold 0 2 31 1 ee Rising Event Index 1 65535 O Falling Event Index 1 65535 fs 7 indicates mandatory data Add i Jae Rising Event Falling Figure 5 104 SNMP gt RMON gt RMON Alarm The configuration contains the following fields Index 1 65535 Indica
10. CPU utilization of large file transfers like large multimedia files or large data files by enabling more efficient larger payloads per packet The Jumbo Frame page allows network managers to enable Jumbo Frames on the device The Jumbo Frame default is disabled Select Enabled then click Apply to turn on the jumbo frame support Jumbo Frame Settings O Safeguard Jumbo Frame Enabled Disabled 7 Maximum Length is 10000 bytes Apply Figure 5 36 L2 Functions gt Jumbo Frame Settings L2 Functions gt Port Mirroring Port Mirroring is a method of monitoring network traffic that forwards a copy of each incoming and or outgoing packet from one port of the Switch to another port where the packet can be studied This enables network managers to better monitor network performances Port Mirroring Enabled Disabled Target Port 01 v Source Port Selection Apply Se E A All CO All a FYR EY EY FYR FY FR FY EY FY EY YD a WN SWN I AU DWI YI CHIN YNO NIN ECH ELN CHIN CYN EDEN CEN A EE HE EN HN TEU HN EN CU EU HU HU EU NY HN MG SS DS 9 9 5 0 2 2 Figure 5 37 L2 Functions gt Port Mirroring Settings Port Mirroring Enables or disables the Port Mirroring status Target Port Defines the target port Source Port Selection TX Duplicates the data transmitted from the source port and forwards it to the Target Port Click all to include all ports into port mirroring 36 5 Configuration D Lin
11. ECHO Untagged A CYN CENFYN CYN CYN Forbidden Pe SS Y EY EC TYF YD EYN HE EI ER IF EI YE Figure 5 26 Configuration gt 802 10 VLAN gt Add VID 30 5 Configuration D Link Web Smart Switch User Manual Asymmetric VLAN Example Enabled Disabled Apply Total static VLAN entries 2 add e Maximum an entries Figure 5 27 Configuration gt 802 10 VLAN gt Example VIDs VID 2 VLAN Name Advertisement Enabled Disabled Maximum 20 characters Back Apply CR a i a E E is isis is is is 9 so 5 9 9 e e se w w s ee ee eo I ien Un ur rn MEWN HU YCC YNI CYNI CYN CYN CYICYI CYSSON ar R Figure 5 28 Configuration gt 802 10 VLAN gt VID Assignments VLAN gt VLAN Status The VLAN Status pago is for user to search the VLAN which has already existed by VLAN ID or VLAN Name Total VLAN Entries 1 2 Index VAND 6 O __ Search VLAN Status Static VLAN Advertistment Disabled O T a c a a i O EE EU HN EN EN NF TN UU HU EN Y Ii I PR YC FYS Y YF EY Y YS Y YA ee i Uu EE TEU EN HN EN EN EN EN TEN HN THU EN Y HN HN E IOI R I I rE Figure 5 29 VLAN gt VLAN Status VLAN gt GVRP gt GVRP Global Settings The GVRP Global Settings page allows user to configure the GARP timer values for application join leave and leave_all GARP timer values GVRP C Enable
12. H L3 Functions Password IP Interface Port Settings Static Route DHCP Auto Configuration Routing Table Finder ACL 2 SysLog Host as ARP ACL Wizard Time Profile Single IP Manangement gt Access Profile List gt Power Saving QoS ACL Finder VLAN Bandwidth Control SNMP 2 802 10 VLAN 3 802 1p DSCP gt Trap to SmartConsole VLAN Status Security SNMP GVRP 3 Trusted Host RMON Voice VLAN A Port Security Monitoring Auto Surveillance VLAN Traffic Segmentation gt Port Statistics L2 Functions Safeguard Engine Cable Diagnostics Jumbo Frame A Storm Control System Log gt Port Mirroring ARP Spoofing Prevention CPU Utilization Loopback Detection 3 DHCP Server Screening MAC Address Table A SSL Spanning Tree AAA wo Link Aggregation a RADIUS Server j Multicast H 6 802 1X SNTP HP LLDP Figure 5 16 Function Tree Device Information The Device Information provides an overview of the switch including essential information such as firmware amp hardware information and IP address It also offers an overall status of common software features RSTP Click Settings to link to L2 Functions gt Spanning Tree gt STP Global Settings Default is disabled Port Mirroring Click Settings to link to L2 Functions gt Port Mirroring Default is disabled Storm Control Click Settings to link to Security gt Storm Control Default
13. Menu offers global function controls such as Reset Reset System Reboot Device Configuration Backup and Restore Firmware Backup and Upgrade Reset Reset System Reboot Device Configuration Backup amp Restore Firmware Backup amp Upgrade Figure 5 8 Tool Menu Reset Provide a safe reset option for the Switch All configuration settings in non volatile RAM will be reset to factory default except for the IP address Warning The Switch will be reset to its factory defaults except IP address and then will reboot Apply Figure 5 9 Tool Menu gt Reset Reset System Provide another safe reset option for the Switch All configuration settings in non volatile RAM will reset to factory default and the Switch will reboot Reset to Default Safeguard Warnina The Switch will be reset to its factory defaults and then will reboot Apply Figure 5 10 Tool Menu gt Reset System 21 5 Configuration D Link Web Smart Switch User Manual Reboot Device Provide a safe way to reboot the system Click Reboot to restart the switch Reboot Device 7 Gafeguard Press the button to resetthe system Apply Figure 5 11 Tool Menu gt Reboot Device Configuration Backup and Restore Allow the current configuration settings to be saved to a file not including the password and if necessary you can restore configuration settings from this file Two methods can be selected HTTP or TFTP AE
14. Netmask 24 255 255 255_0 id Interface Admin State Enabled a Maximum 4 entries Interface Name IP Address Admin State Link State as Delete system default 10 90 90 90 255 0 0 0 Enabled Link Up Figure 5 63 L3 Functions gt IP Interface Interface Name Specifies the name of IP interface VLAN Name Specifies the VLAN name of IP interface IP Address Specifies the IP address for the interface Netmask Select the netmask of IP address Interface Admin State Enables or disables the interface administration state Click Add for the settings to take effect L3 Functions gt Static Route The Static Route page provides user to configure the Static Route settings static Route Setti a IP Address Netmask 24 255 255 255 0 z Metric 1 65535 O O Backup State Pimay H Add P Address e AE M aSk Gateway l E C a O OCO a Backup Status Delete Figure 5 64 L3 Functions gt Static Route IP Address Specifies the IP address of the Static Route Netmask Specifies the Netmask of the IP address entered into the Static Route table Gateway Specifies the corresponding Gateway of the IP address entered into the Static Route table Metric 1 65535 Represents the metric value of the IP interface entered into the table This field may read a number between 1 65535 for an OSPF setting and 1 16 for a RIP setting Backup State The user may choose between Primary and Backup If the Primary Static Route fails th
15. Refresh to refresh the table information L2 Functions gt LLDP gt 802 1 Extension TLV This 802 1 Extension TLV page is used to configure the LLDP Port settings 302 1 Extension LLDP Port Setting From Port 1 H To Port 28 v Port VLAN ID Disabled VLAN Name Disabled VLAN ID Protocol Identity Disabled EAPOL Refresh Apply Port VLAN ID i 1 Disabled __ None None 2 Disabled None None 3 Disabled None None 4 Disabled None None 5 Disabled None _ None 6 Disabled None None 7 Disabled None None 8 Disabled None None 9 Disabled None None 10 Disabled None None 11 Disabled None None 12 Disabled None None 13 Disabled None None 14 Disabled None None 15 Disabled None None 16 Disabled None None 17 Disabled None None 18 Disabled None None 19 Disabled None None 20 Disabled None None 21 Disabled _ None None 22 Disabled None None 23 Disabled None None 24 Disabled None None Fa 4 b Figure 5 54 L2 Functions gt LLDP gt 802 1 Extension TLV From Port To Port A consecutive group of ports may be configured starting with the selected port Port VLAN ID Specifies the Port VLAN ID to be enabled or disabled VLAN Name Specifies the VLAN name to be enabled or disabled in the LLDP port If select E
16. Sat Delete Figure 5 23 System gt Time Profile Settings 29 5 Configuration D Link Web Smart Switch User Manual Profile Name Specifies the profile name Time HH MM Specifies the Start Time and End Time Weekdays Specifies the work day Date Select Date and specifies the From Day and To Day of the time profile Click Add to create a new time profile or click Delete to delete a time profile from the table System gt Power Saving The Power Saving mode feature reduces power consumption automatically when the RJ 45 port is link down or the connected devices are turned off Less power will be consumed also when the short cable is used less than 20 meters By reducing power consumption less heat is produced resulting in extended product life and lower operating costs By default the Cable Length Detection and Link Status Detection are enabled Click Apply to make the change effective Global Settings Cable Length Detection Enabled Disabled Link Status Detection Enabled Disabled o Apply Advanced Power Saving Settings Type LED Shut off State Disabled Time Profile 1 None nd Time Profile 2 None Select All Clear Apply CCR ER CC SL 2 CE e LI CY IN YNN CYN DN YN CYN CY CN YN CY YN Y Summary Time Profile 1 Time Profile 2 LED Shut off dr None Port Standby Disabled None Figure 5 24 System gt Power Saving Advanced Power Saving Settings Type Specifies the P
17. Size is enabled on the port The possible field values are Enabled Enables the Maximum Frame Size configured on the port Disabled Disables the Maximum Frame Size configured on the port Define these parameter fields Click Apply to implement changes made and click Refresh to refresh the table information L2 Functions gt LLDP gt LLDP Management Address Settings The LLDP Management Address Settings allows the user to set management address which is included in LLDP information transmitted 49 5 Configuration D Link Web Smart Switch User Manual From Port To Port Management Address Port State ao BH gt a E Disabled Apply Enabled Management Address Table Enabled Management Address None 01 Figure 5 56 L2 Functions gt LLDP gt LLDP Management Address Settings From Port To Port A consecutive group of ports may be configured starting with the selected port Address Type Specify the LLDP address type on the port The value is always Pv4 Address Specify the address Port State Specify whether the Port State is enabled n the port The possible field values are Enabled Enables the port state configured on the port Disabled Disables the port state configured on the port Click Apply to implement changes made L2 Functions gt LLDP gt LLDP Management Address Table The LLDP Management Address Table page displays the detailed management address information for the entry Management Addr
18. TxPeriod 1 65535 30 sec ReAuthPeriod 1 65535 3600 sec ReAuthentication Port Control Capability Direction mey Capability Open Quiet Supp Server ReAuth Figure 5 82 AAA gt 802 1X gt 802 1X Port Settings From Port To Port Enter the port or ports to be set QuietPeriod 0 65535 Sets the number of seconds that the switch remains in the quiet state following a failed authentication exchange with the client Default is 60 seconds ServerTimeout 1 65535 Sets the amount of time the switch waits for a response from the client before resending the response to the authentication server Default is 30 seconds TxPeriod 1 65535 This sets the TxPeriod of time for the authenticator PAE state machine This value determines the period of an EAP Reauest ldentity packet transmitted to the client Default is 30 seconds ReAuthentication Determines whether regular reauthentication will take place on this port The default setting is Disabled Capability Indicates the capability of the 802 1X The possible field values are Authenticator Specify the Authenticator settings to be applied on a per port basis None Disable 802 1 X functions on the port SuppTimeout 1 65535 This value determines timeout conditions in the exchanges between the Authenticator and the client Default is 30 seconds 62 5 Configuration D Link Web Smar
19. be on packets from UDP Packets UDP Source Port Matches the packet to the UDP Source Port UDP Destination Port Matches the packet to the UDP Destination Port Action Specify the ACL forwarding action matching the rule criteria Permit forwards packets if all other ACL criteria are met Deny drops packets if all other ACL criteria is met Port Enter a range of ports to be configured Press Apply for the settings to take effect y NOTE Once the ACL rules conflict rules with the smaller rule ID will take higher priority AS NOTE Be careful when configuring ACL rules an inappropriate ACL rule may cause management access failure ACL gt Access Profile List The Access Profile List provides information for configuring ACL Profiles manually ACL profiles are attached to interfaces and define how packets are forwarded if they match the ACL criteria 64 5 Configuration D Link Web Smart Switch User Manual Add Delete All Voice VLAN Source MAC ARP SP Source MAC Ether Type ARP Sender MAC ARP Sender IP ARP SP Ether Type ARP Sender IP Surveillance 5 VLAN Source MAC Show Details Current Max Profile 0 50 Current Max Rule 2 200 Figure 5 85 ACL gt Access Profile List The contents of Access Profile List table include Profile ID Indicates the profile Identification number The possible configured profile IDs are 1 50 and profile ID 51 is reserved for Voice VLAN Type Th
20. data Add index Description Type Community Owner Last Time Sent Figure 5 105 SNMP gt RMON gt RMON Event The RMON Events Page contains the following fields Index 1 65535 Displays the event Description Specifies the user defined event description Type Specifies the event type The possible values are None Indicates that no event occurred Log Indicates that the event is a log entry SNMP Trap Indicates that the event is a trap Log and Trap Indicates that the event is both a log entry and a trap Community Specifies the community to which the event belongs Owner Specifies the time that the event occurred Click Add to add a new RMON event Monitoring gt Port Statistics The Port Statistics screen displays the status of each port packet count 73 5 Configuration D Link Web Smart Switch User Manual Refresh Clear 0 0 oOo 0 0 0 23468420 0 ojo joc jojo je jo jo jo jo jo jo jo jo o jo jo jo jo o o jo jo jo jo jo jo jo 0 0 0 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ojo jojo jo jo jo jo jo jo jo jo jo jo o jojo jo jojo o jo jo jo joj jo je oajo jojo jo jo jo jo jo jo jo jo jo jo jo jo jo jo jo jo jo je Figure 5 106 Monitoring gt Port Statistics Refresh Renews the details collected and displayed Clear To reset the details displayed Tx
21. direction on the port The possible field values are Both Specify the control is exerted over both incoming and outgoing traffic through the controlled port selected in the first field In Disables the support in the present firmware release Click Apply to implement configuration changes AAA gt 802 1X gt 802 1X User The 802 1X User page allows user to set different local users on the Switch Enter a 802 1X User name Password and Confirm Password Properly configured local users will be displayed in the table 802 1X User Password Confirm Password 7 Maximum 15 characters Add Total Entries 0 Figure 5 83 AAA gt 802 1X gt 802 1X User Click Add to add a new 802 1X user ACL gt ACL Wizard Access Control List ACL allows you to establish criteria to determine whether or not the Switch will forward packets based on the information contained in each packet s header This criteria can be specified on a basis of the MAC address or IP address The ACL Configuration Wizard will aid with the creation of access profiles and ACL Rules The ACL Wizard will create the access rule and profile automatically For DGS 1500 20 28 the maximum usable profiles are 50 and with 200 Rules in total for the switch For DGS 1500 52 the maximum usable profiles are 50 and with 450 Rules in total for the switch 63 5 Configuration D Link Web Smart Switch User Manual General ACL Rules From Any i ay To Any v S
22. gt Port Settings Speed Gigabit Fiber connections can operate in 1000M Full Force Mode Auto Mode or Disabled Copper connections can operate in Forced Mode settings 1000M Full 100M Full 100M Half 10M Full 10M Half Auto or Disabled The default setting for all ports is Auto NOTE Be sure to adjust port speed settings appropriately after changing the connected cable media types MDI MDIX A medium dependent interface MDI port is an Ethernet port connection typically used on the Network Interface Card NIC or Integrated NIC port on a PC Switches and hubs usually use Medium dependent interface crossover MDIX interface When connecting the Switch to end stations user have to use straight through Ethernet cables to make sure the Tx Rx pairs match up properly When connecting the Switch to other networking devices a crossover cable must be used This switch provides a configurable MDI MDIX function for users The switches can be set as an MDI port in order to connect to other hubs or switches without an Ethernet crossover cable Auto MDI MDIX is designed on the switch to detect if the connection is backwards and automatically chooses MDI or MDIX to properly match the connection The default setting is Auto MDI MDIX Flow Control You can enable this function to mitigate the traffic congestion Ports configured for full duplex use 802 3x flow control half duplex ports use backpressure flow control The default setting is Dis
23. is XX XX XX XX XX XX Ports Specify the switch ports that you want to implement the access rule to Action Specify the ACL forwarding action matching the rule criteria Permit forwards packets if all other ACL criteria are met Deny drops packets if all other ACL criteria is met Click Apply to make it effective NOTE The switch begins the access rule with the smallest access ID so be careful in assigning the ID for the expected results To modify an existing rule please click on the Access ID hyperlink Back Add Profile ID Delete 4 2 MAC Source MAC Permit Delete Figure 5 91 ACL gt Access Profile List gt Access Rule List ACL gt ACL Finder This page is used to help find a previously configured ACL entry To search for an entry enter the profile ID from the drop down menu select a port that you wish to view define the state and click Search The table on the lower half of the screen will display the entries To delete an entry click the corresponding Delete buiton ACL rule finder helps you identify any rule has been assigned to a specific port Profile ID Any Pots Search _ Profile ID Access ID Delete Figure 5 92 ACL gt ACL Finder 67 5 Configuration D Link Web Smart Switch User Manual SNMP gt Trap to SmartConsole The Trap to SmartConsole page allows user the set the difference status of SNMP notifications trapped to the Smartconsole Trap to SmartConsole Ul a Trap To SmartCons
24. p2p status changes to operate as if the p2p value were False The default setting for this parameter is Auto Restricted Role Toggle between True and False to set the restricted role state of the packet If set to True the port will never be selected to be the Root port The default value is False Restricted TCN Toggle between True and False to set the restricted TCN of the packet Topology Change Notification TCN is a BPDU that a bridge sends out to its root port to signal a topology change If set to True it stops the port from propagating received TCN and to other ports The default value is False Click Apply for the settings to take effect Click Refresh to renew the page L2 Functions gt Link Aggregation gt Port Trunking The Trunking function enables the combining of two or more ports together to increase bandwidth Up to eight Trunk groups may be created and each group consists up to eight ports Port Trunking i Sfar Link Aggregation Enabled Disabled Apply Link Aggregation Settings Group 01 Type LACP Apply Port joi 02 03 eS GC To tt ttt E E E E E L E E E E E m E E E E E E E E E mM E E E E E 7 Maximum 8 ports in static group and 8 ports in LACP group Trunking list Figure 5 43 L2 Functions gt Link Aggregation gt Port Trunking Link Aggregation State Enable or Disable the Link Aggregation state ID Specifies the Trunking ID Type Specifies the Link Aggregation type There a
25. the number of new entries inserted since switch reboot Number of Table Delete Displays the number of new entries deleted since switch reboot Number of Table Drop Displays the number of LLDP frames dropped due to that the table was full Number of Table Age Out Displays the number of entries deleted due to Time To Live expiring LLDP Port Statistics Displays the counters that refer to the ports TxPort FramesTotal Displays the total number of LLDP frames transmitted on the port RxPort FramesDiscarded Displays the total discarded frame number of LLDP frames received on the port RxPort FramesErrors Displays the Error frame number of LLDP frames received on the port RxPort Frames Displays the total number of LLDP frames received on the port RxPortTLVsDiscarded Each LLDP frame can contain multiple pieces of information known as TLVs If a TLV is malformed it is counted and discarded 52 5 Configuration D Link Web Smart Switch User Manual RxPortTLVsUnrecognized Displays the number of well formed TLVs but with an known type value RxPort Ageouts Each LLDP frame contains information about how long time the LLDP information is valid If no new LLDP frame is received within the age out time the LLDP information is removed and the Age Out counter is incremented L3 Functions gt IP Interface The IP Interface page provides user to configure the IP Interface settings interface Settings
26. therefore excessive bandwidth can be saved The following figure displays the status of Quality of Service priority levels of each port higher priority means the traffic from this port will be first handled by the switch For packets that are untagged the switch will assign the priority depending on your configuration 56 5 Configuration D Link Web Smart Switch User Manual Select QoS Mode 802 1p Queuing mechanism Strict Friority WRR Low Medium High Highest 1 2 4 8 From Port To Port Priority 01 20 Medium Apply For ingress untagged packets the per port Default Priority settings will be applied to packets of each port to provide port based traffic prioritization For ingress tagged packets D Link Smart Switches will refer to their 802 1p information and prioritize them with 4 different priority queues PP RYDD ON Low 1 2 Medium 03 High 4 5 cu ta Figure 5 71 QoS gt 802 1p DSCP Select QoS Mode Specifies the QoS mode to be 802 1p or DSCP Queuing Mechanism Strict Priority Denoting a Strict scheduling will set the highest queue to be emptied first while the other queues will follow the weighted round robin scheduling scheme WRR Use the weighted round robin WRR algorithm to handle packets in an even distribution in priority classes of service Click Apply for the settings to take effect From Port To Port Defines the port range which the port packet prioriti
27. with Profile ID 4 Continue Figure 5 88 Access Rule List NOTE You cannot select Payload in a MAC ACL or L2 Header in IP ACL 3 After the Profile ID has been created click Continue to go back to the main Access Profile List page clicking the Edit New Rules button to enter the Access Rule List page Access Rule St S8feguar Back Add Profile ID Figure 5 89 Access Rule List Profile ID Indicates the corresponding access profile Identification number Access ID Indicates the access rule Identification number Profile Type Displays the profile type Summary Displays the access rule summary Action Displays the access rule action To add a new rule click Add 66 5 Configuration D Link Web Smart Switch User Manual Profile Information Profile ID 04 Source MAC FF FF FF FF FF CO Rule Detail Keep an input field as blank to treat the corresponding option as don t care Type MAC Source MAC Address Ex00 00 00 00 00 10 Ports fe 2 Action Permit H Back Apply Figure 5 90 Add Access Rule Profile Information displays the information to which the rule is being added to including Profile ID and Source MAC In Rule Detail you can specify the details of an access rule Below are all the possible parameters that can be set Access ID Specify the Access ID 1 65535 Type Display the type of rule Source MAC Address Specify the Source MAC address the field of format
28. 260 seconds Last Member Query Interval 1 25 sec The Last Member Query Interval is the Max Response Time inserted into Group Specific Queries sent in response to Leave Group messages and is also the amount of time between Group Specific Query messages This value may be adjusted to modify the leave latency of the network A reduced value results in reduced time to detect the loss of the last member of a group Default is 1 second Max Response Time 10 25 sec The Max Response Time specifies the maximum allowed time before sending a responding report message Adjusting this setting effects the leave latency or the time between the moment the last host leaves a group and when the multicast server is notified that there are no more members It also allows adjustments for controlling the frequency of IGMP traffic on a subnet Default is 10 seconds To enable IGMP snooping for a given VLAN select enable and click on the Apply button Then press the VLAN ID number under IGMP Snooping VLAN Setting and select the State Querier State and Fast Leave to be enabled or disabled and the ports to be assigned as router ports for IGMP snooping for the VLAN 43 5 Configuration D Link Web Smart Switch User Manual Press Apply for changes to take effect A router port configured manually is a Static Router Port and a Dynamic Router Port is dynamically configured by the Switch when a query control message is received VLAN ID 4094 VLAN Name ASV_409
29. 4 State Enabled Querier State Disabled Fast Leave Disabled Ay Static Router Ports Pile es EES aE nun mln n nj a H H H H y r H H H F Z H g ym a a a z H a a H J F Dynamic Router Ports mn m m a un nn E m nn z H H H i z H _ i H H Hi E Bl i A F a al F Zj H a E i i Back amy Figure 5 46 L2 Functions gt Multicast gt IGMP Snooping VLAN Settings To view the Multicast Entry Table for a given VLAN press the View button Back Delete All GrouplD VLANID Multicast Group Multicast MAC address Member Port Figure 5 47 L2 Functions gt Multicast gt Multicast Entry Table L2 Functions gt Multicast gt Multicast Forwarding The Multicast Forwarding page displays all of the entries made into the Switch s static multicast forwarding table To implement the Multicast Forwarding Settings input VID Multicast MAC Address and port settings then click Add vip D Multicast MAC Address O Add Pot Select AI for o2 fos oa Jos fos Joz fos foo o 2 2 a Cc C C Cc Cc Cc Cc Cc Cc Cc Member All None an io lo o9 9 o 9 o9 o9 o o o o a o Port SeleciAI C C Cc C Cc C C C C C Member All Total Static Entries 0 MAC Address Member Ports Figure 5 48 L2 Functaions gt Multicast gt Multicast Forwarding VID The VLAN ID of the VLAN to which the corresponding MAC address belongs Multicast MAC Address The MAC address of the static sou
30. 5 Configuration D Link Web Smart Switch User Manual 5 Configuration The features and functions of the D Link SmartPro Switch can be configured for optimum use through the Web based Management Utility Smart Wizard Configuration After a successful login the Smart Wizard will guide you through essential settings of the D Link Web Smart Switch If you do not plan to change anything click Exit to leave the Wizard and enter the Web Interface You can also skip it by clicking Don t show Smart Wizard next time for the next time you logon to the Web based Management IP Information IP Information will guide you to do basic configurations on 3 steps for the IP Information access password and SNMP If you are not changing the settings click on Exit to go back to the main page Select Static DHCP or BOOTP and type the desired new IP Address select the Netmask and type the Gateway address then click the Apply button to enter the next Password setting page No need to enter IP Address Netmask and Gateway of DHCP and BOOTP selection Welcome to Smart Wizard The wizard will guide you to do basic configurations on 3 steps for the IP Information access a w password and SNMP Ifyou are not changing the settings click on Exif to go back to the main i aN page Step 1 of 3 The wizard will help to complete settings for IP address Netmask and Gateway Static DHCP C Bo0TP IP Address 10 90 90 90 Netmask o 255 0 0 0
31. HTTP Backup current configuration to file Backup Restore configuration from file Be Restore TFTP TFTP Server IP Address TFTP File Name Backup current configuration to file Restore configuration from file Figure 5 12 Tool Menu gt Configure Backup and Restore HTTP Backup or restore the configuration file to or from your local drive Click Backup to save the current settings to your disk Click Browse to browse your inventories for a saved backup settings file Click Restore after selecting the backup settings file you want to restore TFTP TFIP Trivial File Transfer Protocol is a file transfer protocol that allows you to transfer files to a remote TFTP server Specify TFTP Server IP Address and File Name for the configuration file you want to save to restore from Click Backup to save the current settings to the TFTP server Click Restore after selecting the backup settings file you want to restore Note Switch will reboot after restore and all current configurations will be lost Firmware Backup and Upgrade Allow for the firmware to be saved or for an existing firmware file to be uploaded to the Switch Two methods can be selected HTTP or TFTP _Firmware Backup and Upgrade Gafeguard HTTP Backup firmware to file Backup Upgrade firmware from file Be Upgrade TFTP TFTP Server IP Address TFTP File Name Backup firmware to file Upgrade
32. Log 19 5 Configuration D Link Web Smart Switch User Manual ID Displays an incremented counter of the System Log entry The Maximum entries are 500 Time Displays the time in days hours and minutes the log was entered Log Description Displays a description event recorded Severity Displays a severity level of the event recorded Click Refresh to renew the page and click Clear to clean out all log entries 76
33. OK Number of packets transmitted successfully RxOK Number of packets received successfully TxError Number of transmitted packets resulting in error RxError Number of received packets resulting in error To view the statistics of individual ports click one of the linked port numbers for details Port 5 Back Refresh Clear OutOctets 22494750 InOctets 1722143514 OutUcastPkts 39572 InUcastPkts 14988177 OutNUcastPkts 9069 InNUcastPkts 8480949 OutErrors 0 InDiscards 0 LateCollisions 0 InErrors 0 ExcessiveCollisions 0 FCSErrors 0 InternalMacTransmitErrors 0 FrameTooLongs 0 InternalMacReceiveErrors 0 Figure 5 107 Monitoring gt Port Statistics Back Go back to the Statistics main page Refresh To renew the details collected and displayed Clear To reset the details displayed Monitoring gt Cable Diagnostics The Cable Diagnostics is designed primarily for administrators and customer service representatives to examine the copper cable quality It rapidly determines the type of cable errors occurred in the cable Select a port and then click the Test Now button to start the diagnosis 74 5 Configuration D Link Web Smart Switch User Manual Port 01 E Test Result Cable Fault Distance meters Cable Length meters The cable diagnostics feature is designed primarily for administrators or customer service representatives to verify and test copper cables it can rapidly determine the guality ofthe cables and the
34. P Address Set the RADIUS server IP Authentication Port 1 65535 Set the RADIUS authentic server s UDP port The default port is 1812 Accounting Port 1 65535 Set the RADIUS account server s UDP port The default port is 1813 Timeout 1 255 sec This field will set the time the Switch will wait for a response of authentication from the user The user may set a time between 7 and 255 seconds The default setting is 5 seconds Retransmit 1 255 times This command will configure the maximum number of times the Switch will accept authentication attempts Users failing to be authenticated after the set amount of attempts will be denied access to the Switch and will be locked out of further authentication attempts Command line interface users will have to wait 60 seconds before another authentication attempt Telnet and web users will be disconnected from the Switch The user may set the number of attempts from 7 to 255 The default setting is 2 Key Set the key the same as that of the RADIUS server Confirm Key Confirm the shared key is the same as that of the RADIUS server Click Apply to implement configuration changes 61 5 Configuration D Link Web Smart Switch User Manual AAA gt 802 1X gt 802 1X Global Settings Network switches provide easy and open access to resources by simply attaching a client PC Unfortunately this automatic configuration also allows unauthorized personnel to easily intrude and possibly gai
35. Root Port 0 Figure 5 41 L2 Functions gt Spanning Tree gt STP Global Settings STP Version You can choose RSTP or STP Compatible The default setting is RSTP Bridge Priority This value between 0 and 61410 specifies the priority for forwarding packets the lower the value the higher the priority The default is 32768 TX Hold Count 1 10 Used to set the maximum number of Hello packets transmitted per interval The count can be specified from 7 to 10 The default is 6 Maximum Age 6 40 sec This value may be set to ensure that old information does not endlessly circulate through redundant paths in the network preventing the effective propagation of the new information Set by the Root Bridge this value will aid in determining that the Switch has spanning tree configuration values consistent with other devices on the bridged LAN If the value ages out and a BPDU has still not been received from the Root Bridge the Switch will start sending its own BPDU to all other switches for permission to become the Root Bridge If it turns out that the Switch has the lowest Bridge Identifier it will become the Root Bridge A time interval may be chosen between 6 and 40 seconds The default value is 20 Max Age has to have a value bigger than Hello Time Hello Time 1 10 sec The user may set the time interval between transmissions of configuration messages by the root device thus stating that the Switch is still functioning The default is 2 s
36. SIP Port Se th SO SOfoguard From Port 1 To Port 26 State External Cost 0 200000000 200000c Migrate Edge Auto 0 Auto FRON 128 gj P2P Auto Restricted Role False Restricted TCN F lse Figure 5 42 System gt SNMP Settings gt SNMP Global Port Settings From Port To Port A consecutive group of ports may be configured starting with the selected port State Use the drop down menu to enable or disable STP by per port based It will be selectable after the global STP is enabled External Cost This defines a metric that indicates the relative cost of forwarding packets to the specified port list Port cost can be set automatically or as a metric value Thedefault value is O auto 0 auto Setting O for the external cost will automatically set the speed for forwarding packets to the specified port s in the list for optimal efficiency Default port cost 100Mbps port 200000 Gigabit port 20000 Value 1 200000000 Define a value between 1 and 200000000 to determine the external cost The lower the number the greater the probability the port will be chosen to forward packets Migrate Setting this parameter as Yes will set the ports to send out BPDU packets to other bridges requesting information on their STP setting If the Switch is configured for RSTP the port will be capable to migrate from 802 1d STP to 802 1w RSTP Migration should be set as yes on ports connected to n
37. VLAN setting page will be the static member port of Auto Surveillance VLAN Priority Specifies the priority level of Auto Surveillance VLAN on the Switch The possible values are Highest High Medium and Low The default priority is High Tagged Uplink Downlink Port Specifies the port or ports to be tagged uplink port or downlink port for the Auto Surveillance VLAN 35 5 Configuration D Link Web Smart Switch User Manual Click Apply to implement changes of Auto Surveillance VLAN global settings User defined MAC Settings Component Type Auto Surveillance VLAN will automatically detect D Link Surveillance Devices by default There are another five surveillance components that could be configured to be auto detected by the Auto Surveillance VLAN These five components are Video Management Server VMS VMS Client Remote viewer Video Encoder Network Storage and Other P Surveillance Devices Description Specifies the description for the component type MAC OUI You can manually create an MAC or OUI address for the surveillance component The maximum number of user defined MAC address is 5 System will auto generate an ACL profile Profile ID 56 for all the Auto Surveillance VLAN rules Click Add to create a new surveillance component and Refresh to refresh the Auto Surveillance VLAN summary table L2 Functions gt Jumbo Frame Jumbo Frame support is designed to enhance Ethernet networking throughput and significantly reduce the
38. View Detailed Figure 5 59 L2 Functions gt LLDP gt LLDP Remote Port Table 51 5 Configuration D Link Web Smart Switch User Manual To view the settings for a remote port click View Normal and the following page GP PortlD 1 Remote Entities Count 0 NONE Figure 5 60 L2 Functions gt LLDP gt LLDP Remote Port Table Normal To view the detail settings for a remote port click View Detailed and the following page DAS PortlD 1 Remote Entities Count 0 NONE Figure 5 61 L2 Functions gt LLDP gt LLDP Remote Port Table Detailed L2 Functions gt LLDP gt LLDP Statistics The LLDP Statistics page displays an overview of all LLDP traffic ji i LLDP Statistics System lLastChangeTime CW Number ofTableinset RR e e e IO tu ofTableDelete OaNa K au eOO Number ofTableDrop 0 Number ofTableAge Out eil I amp LLDP Port Statistics Refresh Discarded Discarded Unrecognized 1 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 5 0 0 0 0 0 0 0 Y 0 0 0 0 0 0 0 9 0 0 0 0 0 0 0 11 0 0 0 0 0 0 0 LA 0 0 0 0 0 0 0 15 n n n n n n n Figure 5 62 L2 Functions gt LLDP gt LLDP Statistics The following information can be viewed LLDP Statistics System Displays the counters that refer to the whole switch Last Change Time Displays the time for when the last change entry was last deleted or added It is also displays the time elapsed since last change was detected Number of Table Insert Displays
39. a password of up to 20 characters Confirm Password Confirm the new password entered above Entering a different password here from the one set in the New Local Enabled field will result in a fail message System gt Port Settings In the Port Setting page the status of all ports can be monitored and adjusted for optimum configuration By selecting a range of ports From Port and To Port the Speed can be set for all selected ports by clicking Apply Press the Refresh button to view the latest information ab LAGU Hee From Port To Port Speed MDIMDIX Flow Control 01 28 Auto v Auto gt Disabled Refresh Apply Link Status MDI MDIX Flow Control Link down i Disabled Link down Disabled Link down Disabled Link down i i Disabled 100M Full j i Disabled Link down i i Disabled Link down Disabled Link down j i Disabled Link down j i Disabled Link down i Disabled Link down p __ 4 Disabled Link down __Disabled Link down Disabled Link down Disabled Link down Disabled Link down i Disabled Link down Disabled Link down i Disabled Link down Disabled Link down i Disabled Link down Disabled Link down Disabled Link down Disabled Link down Disabled Link down Disabled Link down Disabled Link down i Disabled Link down i Disabled Figure 5 20 System
40. abled 2 5 Configuration D Link Web Smart Switch User Manual System gt DHCP Auto Configuration This page allows you to enable the DHCP Auto Configuration feature on the Switch When enabled the Switch becomes a DHCP client and gets the configuration file from a TFTP server automatically on next boot up To accomplish this the DHCP server must deliver the TFTP server IP address and configuration file name information in the DHCP reply packet The TFTP server must be up and running and store the necessary configuration file in its base directory when the request is received from the Switch VMCE AUTO Contiauration gt ettinas DHCP Auto Configuration Enabled Disabled Apply lf DHCP Auto Configuration is enabled the switch will load a previously saved configuration file from TFTP server after every boot up 7 fthe switch is unable to complete the Auto Configuration process the last configuration file saved in switch flash memory will be loaded Figure 5 21 System gt DHCP Auto Configuration System gt SysLog Host Settings The SysLog Host Settings page allows user to send Syslog messages to up to four designated servers using the System Log Server To set the System Log Server configuration click Apply 4 MOS b Ws System Log Enabled Disabled Server IP Address Severity All UDP Port 1 65535 514 Facility ocal 0 Time Stamp Apply Figure 5 22 System gt SysLog Host Settings Sys
41. abled TX_and_RX Disabled Disabled Disabled Disabled 5 Disabled TX_and_RX Disabled Disabled Disabled Disabled 6 Disabled TX_and_RX Disabled Disabled Disabled Disabled 7 Disabled TX_and_RX Disabled Disabled Disabled Disabled 8 Disabled TX_and_RX Disabled Disabled Disabled Disabled 9 Disabled TXand Rx Disabled __Disabled Disabled Disabled __ 10 Disabled TX_and_RX _ Disabled Disabled Disabled Disabled 11 Disabled TX_and_RX Disabled Disabled Disabled Disabled 12 Disabled TX_and_RX Disabled Disabled Disabled Disabled 13 Disabled TX_and_RX Disabled Disabled _ Disabled Disabled 14 L Disabled i TX_and_RX gt Disabled Disabled i Disabled Disabled 15 Disabled TX_and_RX Disabled Disabled Disabled Disabled 16 Disabled TX_and_RX Disabled Disabled Disabled Disabled 17 Disabled TX_and_RX Disabled Disabled Disabled Disabled 18 Disabled TX_and_RX Disabled Disabled Disabled Disabled 19 Disabled TX_and_RX Disabled Disabled Disabled Disabled 20 Disabled TX_and_RX Disabled Disabled Disabled Disabled 21 Disabled TX_and_RX Disabled Disabled Disabled Disabled 4 gt Figure 5 53 L2 Functions gt LLDP gt LLDP Port Settings From Port To Port A consecutive group of ports may be configured starting with the selected port Notification State Specifies whether notification is sent when an LLDP topology change occurs on the port The possible field values are Enabled Enables LLDP notification on the port Disabled Dis
42. ables LLDP notification on the port This is the default value Admin Status Specifies the LLDP transmission mode on the port The possible field values are TX_Only Enables transmitting LLDP packets only RX_Only Enables receiving LLDP packets only TX_and_RX Enables transmitting and receiving LLDP packets This is the default Disabled Disables LLDP on the port Port Description Specifies whether the Port Description TLV is enabled on the port The possible field values are Enabled Enables the Port Description TLV on the port Disabled Disables the Port Description TLV on the port System Name Specifies whether the System Name TLV is enabled on the port The possible field values are Enabled Enables the System Name TLV on the port Disabled Disables the System Name TLV on the port 47 5 Configuration D Link Web Smart Switch User Manual System Description Specifies whether the System Description TLV is enabled on the port The possible field values are Enabled Enables the System Description TLV on the port Disabled Disables the System Description TLV on the port System Capabilities Specifies whether the System Capabilities TLV is enabled on the port The possible field values are Enabled Enables the System Capabilities TLV on the port Disabled Disables the System Capabilities TLV on the port Define these parameter fields Click Apply to implement changes made and click
43. ain idea of ARP spoofing is to send fake or spoofed ARP messages to an Ethernet network It associates the attacker s or random MAC address with the IP address of another node such as the default gateway Any traffic meant for that IP address would be mistakenly re directed to the node specified by the attacker A common Dos attack today can be done by associating a nonexistent or specified MAC address to the IP address of the network s default gateway The malicious attacker only needs to broadcast one gratuitous ARP to the network claiming to be the gateway so that the whole network operation is turned down as all packets to the Internet will be directed to the wrong node The ARP Spoofing Prevention function can discard the ARP Spoofing Attack in the network by checking the gratuitous ARP packets and filtering those with illegal IP or MAC addresses 59 5 Configuration D Link Web Smart Switch User Manual IP Address MAC Address Ports PoE 42 46 Add Total Entries 0 Delete All 7 Maximum 64 entries IP Address MAC Address 7 1 ARP is the standard for finding a hosts MAC address However this protocol is vulnerable that cracker can spoof the IP and MAC information in the ARP packets to attack a LAN 2 The main purpose of this feature is to protect network from Man in the Middle or ARP spoofing attack including router gateway or specific client Figure 5 77 Security gt ARP Spoofing Prevention Setting Enter the IP Addres
44. ate a new ARP entry Click Delete or Delete All to delete the information of ARP entry table L3 Functions gt ARP gt ARP Table The ARP Table page provides information regarding Interface Name including which IP address was mapped to what MAC address Entered Interface Name IP Address or MAC Address then click Search to view the information of ARP table InterfaceName IP Address _ MAC Address Search Delete Total Entries 12 ID interface Name IP Address MAC Address vian1 0 0 0 0 ff ffff ff ffff Static 172 21 36 28 00 1c f0 5c 0b be Dynamic vian1 172 21 47 54 00 24 7e 68 e0 e6 Dynamic 07 vian1 172 21 47 138 00 15 00 28 0a 11 Static 255 255 255 255 ff ff ff ffff ff Static 8 40 10 17 Static Figure 5 67 L3 Functions gt ARP gt ARP Table 54 5 Configuration D Link Web Smart Switch User Manual Click Delete to delete the information of ARP table L3 Functions gt ARP gt Gratuitous ARP The Gratuitous ARP page provides users to configure the Gratuitous ARP global settings Gratuitous ARP Global Sett Send when IP Interface is up Enabled Disabled Send when duplicated IP is detected Enabled Disabled Learn received Gratuitous ARP C Enabled Disabled Apply Gratuitous ARP Send Interval Interface Name Time Interval 0 65535 sec __ Apy 7 Maximum 2 entries Interface Name Time Interval System 0 0 Figure 5 68 L3 Functions gt ARP gt Gratuitou
45. ault value Click Apply to implement the changes made L2 Functions gt Multicast gt IGMP Snooping With Internet Group Management Protocol IGMP snooping the Web Smart Switch can make intelligent multicast forwarding decisions by examining the contents of each frame s Layer 2 MAC header IGMP snooping can help reduce cluttered traffic on the LAN With IGMP snooping enabled globally the Web Smart Switch will forward multicast traffic only to connections that have group members attached The settings of IGMP snooping is set by each VLAN individually 42 5 Configuration D Link Web Smart Switch User Manual IGMP Snooping Global Settings IGMP Snooping Enabled Disabled Host Timeout 130 153025 sec Router Timeout 60 600 sec Robustness Variable 2 255 sec Last Member Query Interval 1 25 i sec Query Interval 60 600 125 _ sec Max Response Time 10 25 10 Jsec 7 When Querier state is enabled the Host Timeout is calculated as the formula Host Timeout Robustness Variable Query Interval Max Response Time Apply IGMP Snooping VLAN Settings VLANID VLAN Name State Querier State FastLeave Router Ports 1 default Enabled Disabled Disabled RD2 Enabled Disabled Disabled 4094 ASV_4094 Enabled Disabled Disabled Multicast Entries Page O01 F Ba an Figure 5 45 L2 Functions gt Multicast gt IGMP Snooping By default IGMP is disabled If enabled the IGMP Global Settings will need to be enter
46. character is from 0 to F Figure 5 100 SNMP gt SNMP gt SNMP Engine ID SNMP gt RMON gt RMON Global Settings Users can enable and disable remote monitoring RMON status for the SNMP function on the Switch In addition RMON Rising and Falling Alarm Traps can be enabled and disabled Click Apply to make effects RMON Enabled Disabled Apply Figure 5 101 SNMP gt RMON gt RMON Global Settings SNMP gt RMON gt RMON Statistics The RMON Ethernet Statistics Configuration page displays the information of RMON Ethernet Statistics and allows the user to configure the settings index 1 65535 t Owner 7 indicates mandatory data Add Drop Events Broadcast Packets _ Multiast Packets Figure 5 102 SNMP gt RMON gt RMON Statistics 71 5 Configuration D Link Web Smart Switch User Manual The RMON Ethernet Statistics Configuration contains the following fields Index 1 65535 Indicates the RMON Ethernet Statistics entry number Port Specifies the port from which the RMON information was taken Owner Displays the RMON station or user that requested the RMON information Click Add to make the configurations take effects SNMP gt RMON gt RMON History The RMON History Control Configuration page contains information about samples of data taken from ports For example the samples may include interface definitions or polling periods _RMON History Control Settings Safeguard Index 1
47. d Disabled Join Time 100 100000 ms Leave Time 100 100000 600 ms Leave_All Time 100 100000 ms 7 Leave Time should be longer than 2 Join Time Leave_All Time should be longer than Leave Time Figure 5 30 VLAN gt GVRP gt GVRP Global Settings GVRP Disabled or Enabled the GVRP status Join Time 100 100000 Indicates the time in milliseconds that PDUs are transmitted The default value is 200ms 31 5 Configuration D Link Web Smart Switch User Manual Leave Time 100 100000 Indicates the amount of time in milliseconds that the device waits before leaving its GARP state The leave time is activated by a leave all time message sent received and cancelled by the Join message The default value is 600ms Leave_All Time 100 100000 Used to confirm the port within the VLAN The time in milliseconds between messages sent The default value is 10000ms Click Apply to implement changes made NOTE Leave time must be greater than or egual to three times the join time Leave all time must be greater than the leave time VLAN gt GVRP gt GVRP Port Settings The GVRP Port Settings page allows user to determine whether the Switch will share its VLAN configuration information with other GARP VLAN Registration Protocol GVRP enabled switches In addition Ingress Checking can be used to limit traffic by filtering incoming packets whose PVID does not match the PVID of the port Results can be seen in the table under the c
48. d Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Ojoo Ni DM On amp w N lt Figure 5 55 L2 Functions gt LLDP gt 802 3 extension TLV From Port To Port A consecutive group of ports may be configured starting with the selected port MAC PHY Configuration Status Specifies whether the MAC PHY Configuration Status is enabled on the port The possible field values are Enabled Enables the MAC PHY Configuration Status on the port Disabled Disables the MAC PHY Configuration Status on the port Power via MDI Advertises the Power via MDI implementations supported by the port The possible field values are Enabled Enables the Power via MDI configured on the port Disabled Disables the Power via MDI configured on the port Link Aggregation Specifies whether the link aggregation is enabled on the port The possible field values are Enabled Enables the link aggregation configured on the port Disabled Disables the link aggregation configured on the port Maximum Frame Size Specifies whether the Maximum Frame
49. e Backup Route will support the entry Please take note that the Primary and Backup entries cannot have the same Gateway Click Add for the settings to take effect 53 5 Configuration D Link Web Smart Switch User Manual L3 Functions gt Routing Table Finder The Routing Table Finder page shows the current IP routing table of the Switch To find a specific IP route enter an IP address into the Network Address field and click Search Network Address xe 172 18 208 11 or 172 18 208 11 24 Search _ Figure 5 65 L3 Functions gt Routing Table Finder L3 Functions gt ARP gt Static ARP Global Settings The Static ARP Global Settings page allows network managers to view define modify and delete ARP information for specific devices When static entries are defined a permanent entry is entered and is used to translate IP address to MAC addresses Global Settings ARP Aging Time 0 65535 min Apply Add Static ARP Entry IP Address MaCadaress _ Add Delete All Total Entries 4 10 90 90 90 00 15 00 28 0A 01 STATIC System 172 21 47 138 00 15 00 28 0A 11 LOCAL Figure 5 66 L3 Functions gt ARP gt Static ARP Global Settings ARP Aging Time 0 65535 Specifies the aging time of the ARP entry The default is 5 minutes Click Apply for the settings to take effect Add Static ARP Entry IP Address Specifies the IP address of the ARP entry MAC Address Specifies the MAC address of the ARP entry Click Add to cre
50. e area VLANs can be easily organized to reflect department groups such as R amp D Marketing usage groups such as e mail or multicast groups multimedia applications such as video conferencing and therefore help to simplify network management by allowing users to move devices to a new VLAN without having to change any physical connections The IEEE 802 10 VLAN Configuration page provides powerful VID management functions The original settings have the VID as 1 no default name and all ports as Untagged Delete Click to delete the VLAN group Add Click to create a new VID group assigning ports from 01 to 28 as Untag Tag or Not Member A port can be untagged in only one VID To save the VID group click Apply You may change the name accordingly to the desired groups such as R amp D Marketing email etc 8021GVLANSetings____ A A5A O3533a_ A32w _ __ _ O sm eguard Asymmetric VLAN Example Enabled Disabled Apply Total static VLAN entries 1 F Maximum 4094 entries rn Name Advertisement wines Tagged Forbidden Delete Disabled Page 01 bad Back Next Figure 5 25 VLAN gt 802 10 VLAN vio fF E VLAN Name VLAN Advertisement Enabled Disabled 7 Maximum 20 characters Back Apply CY Ur E un ani nu cc i Untagged ee CH CY CAN CYNAN CYNIN CYN CYN CAN Forbidden tannau enyn pwn pn CY EY En En EY EY Fa ELN WN NI YNNI ANI ON DIN EDI TD EDD EC ECH CH ECH ELN
51. e owner type of ACL profile it can be normal ACL or Voice VLAN Profile Summary Displays the profile summary Show Details To display an ACL s profile details The ACL profile details are displayed below the ACL table Show Rules To show the access rule in this profile Delete To delete an access profile Click Add to manually add a profile Add ACL PF Safeguard Select Profile ID 1 gt Select Frame Type MAC ACL Tagged y IPv4 ACL Select Back Add Figure 5 86 Add Access Profile The steps of adding an access profile are described below 1 After selecting the Profile ID and Frame Type MAC or IPv4 specify attributes like Untagged Tagged for MAC or ICMP lGMP TCP UDP for IPv4 Click Select and a simplified frame diagram will be displayed 5 Configuration D Link Web Smart Switch User Manual Select Profile ID 4 z Select Frame Type MAC ACL Untagged g IPv4 ACL You can select the field in the packet to create filtering mask MAC Address Ether Type PayLoad mie Figure 5 87 Add Access Profile 2 Selecting the field of interest will display the related columns in the lower part of the page Enter the filtering mask and click Apply when done A filtering mask is to specify the digit that you want to check For example if you want to check a network of 192 168 1 0 24 then you should enter the IP mask as 255 255 255 0 Access Profile List NN An Access Profile has been created
52. econds Forward Delay 4 30 sec This sets the maximum amount of time that the root device will wait before changing states The default is 15 seconds Root Bridge Displays the MAC address of the Root Bridge Root Cost Displays the cost of the Root Bridge Root Maximum Age Displays the Maximum Age of the Root Bridge Root Forward Delay Displays the Forward Delay of the Root Bridge Root port Displays the root port Click Apply for the settings to take effect Click Refresh to renew the page 39 5 Configuration D Link Web Smart Switch User Manual L2 Functions gt Spanning Tree gt STP Port Settings STP can be set up on a port per port basis In addition to setting Spanning Tree parameters for use on the switch level the Switch allows for the configuration of groups of ports each port group of which will have its own spanning tree and will require some of its own configuration settings An STP Group spanning tree works in the same way as the switch level spanning tree but the root bridge concept is replaced with a root port concept A root port is a port of the group that is elected based on port priority and port cost to be the connection to the network for the group Redundant links will be blocked just as redundant links are blocked on the switch level The STP on the switch level blocks redundant links between switches and similar network devices The port level STP will block redundant links within an STP Group
53. ed Host Timeout 130 153025 sec This is the interval after which a learned host port entry will be purged For each host port learned a Port Purge Timer runs for Host Port Purge Interval This timer will be restarted whenever a report message from host is received over that port If no report messages are received for Host Port Purge Interval time the learned host entry will be purged from the multicast group The default value is 260 seconds Robustness Variable 2 255 sec The Robustness Variable allows adjustment for the expected packet loss on a subnet If a subnet is expected to be lossy the Robustness Variable may need to be increased The Robustness Variable cannot be set to zero and it SHOULD NOT be Default is 2 seconds Query Interval 60 600 sec The Query Interval is the interval between General Queries sent By adjusting the Query Interval the number of IGMP messages can be increased or decreased larger values will cause IGMP Queries to be sent less often Default value is 125 seconds Router Timeout 60 600 sec This is the interval after which a learned router port entry will be purged For each router port learned a Router Port Purge Timer runs for Router Port Purge Interval This timer will be restarted whenever a Query control message is received over that port If there are no Query control messages received for Router Port Purge Interval time the learned router port entry will be purged Default is
54. efault value is 4 Message TX Interval 5 32768 This parameter indicates the interval at which LLDP frames are transmitted on behalf of this LLDP agent The default value is 30 seconds LLDP Relnit Delay 1 10 This parameter indicates the amount of delay from the time adminStatus becomes disabled until re initialization is attempted The default value is 2 seconds LLDP TX Delay 1 8192 This parameter indicates the delay between successive LLDP frame transmissions initiated by value or status changes in the LLDP local systems MIB The value for txDelay is set by the following range formula 1 lt txDelay lt 0 25 msgTxlnterval The default value is 2 seconds L2 Functions gt LLDP gt LLDP Port Settings The Basic LLDP Port Settings page displays LLDP port information and contains parameters for configuring LLDP port settings Basic LLDP Port Settings Sf UPS From Port To Port Notification State Admin Status Port Description System Name System Description System Capabilities 1 v 28 Disabled TX_Only Disabled Disabled Disabled Disabled Refresh Apply Pot Notification State Admin Status Port Description SystemName _ System Description System Capabilities 1 Disabled TX_and_RX Disabled Disabled Disabled Disabled 2 Disabled TX_and_RX Disabled Disabled Disabled Disabled 3 Disabled TX_and_RX Disabled Disabled Disabled Disabled 4 Dis
55. er is polled for Unicast information The Poll Interval default is 30 seconds 45 5 Configuration D Link Web Smart Switch User Manual Click Apply to implement changes made When selecting Local for the clock source users can select from one of two options Manually Time Settings Users input the system time manually Sync To PC The system time will be synchronized from the local computer L2 Functions gt SNTP gt TimeZone Settings The TimeZone Setting Page is used to configure time zones and Daylight Savings time settings for SNTP TimeZone Set e Daylight Saving Time C Enabled Disabled Daylight Saving Time Offset co _ gt min Time Zone Offset GMT HH mM w 00 zijo z Daylight Saving Time Settings From Month Day Jan z m jg From HH MM bo sl _ jj To Month Day Jan 1 jg To HH MM loo go jg Apply Figure 5 51 L2 Functions gt SNTP gt TimeZone Settings Daylight Saving Time State Enable or disable the DST Settings Daylight Saving Time Offset Use this drop down menu to specify the amount of time that will constitute your local DST offset 30 60 90 or 120 minutes Time Zone Offset GMT HH MM Use these drop down menus to specify your local time zone s offset from Greenwich Mean Time GMT Daylight Saving Time Settings From Month Day Enter the month DST and date DST will start on each year From HH MM Enter the time of day that DST will start on each year To M
56. ervice Type Action Ports Ex 124 6 Apply 7 ACL Wizard will create the access profile and rule automatically For advanced access profile rule setting you can manually configure it in Access Profile List Figure 5 84 ACL gt ACL Wizard From Specify the origin of accessible packets The possible values are Any Indicates ACL action will be on packets from any source MAC Address Indicates ACL action will be on packets from this MAC address IPv4 Addresses Indicates ACL action will be on packets from this IPv4 source address To Specify the destination of accessible packets The possible values are Any Indicates ACL action will be on packets from any source MAC Address Indicates ACL action will be on packets from this MAC address The field of format is XX XX XX XX XX XX IPv4 Addresses Indicates ACL action will be on packets from this IPv4 source address Service Type Specify the type of service The possible values are Any Indicates ACL action will be on packets from any service type Ether type Specifies an Ethernet type for filtering packets ICMP All Indicates ACL action will be on packets from ICMP packets IGMP IGMP packets can be filtered by IGMP message type TCP All Indicates ACL action will be on packets from TCP Packets TCP Source Port Matches the packet to the TCP Source Port TCP Destination Port Matches the packet to the TCP Destination Port UDP All Indicates ACL action will
57. es are defined Priority Defines the priority assigned to the port The priority are Highest High Medium and Low Click Apply for the settings to take effect Security gt Trusted Host Use Trusted Host function to manage the switch from a remote station You can enter up to ten designated management stations networks by defining the IP Address Netmask as seen in the figure below Trusted Host Enabled Disabled Apply IP Address sd Netmask 24 255 255 255 0 7 Please add your local host IP address first to make it trusted Otherwise the connection will be stopped Add Trusted Host Table 7 Maximum 10 entries CS Address Figure 5 72 Security gt Trusted Host Click Apply to enable or disable the Trusted Host feature Type in the IP Address and select Netmask then click Add button to create a Trusted Host IP To delete the IP address simply click the Delete button 57 5 Configuration D Link Web Smart Switch User Manual Security gt Port Security Port Security is a security feature that prevents unauthorized computers with source MAC addresses unknown to the Switch prior to stopping auto learning processing from gaining access to the network A given ports or a range of ports dynamic MAC address learning can be stopped such that the current source MAC addresses entered into the MAC address forwarding table can not be changed once the port lock is enabled Using the drop down menu change Admin State to Enab
58. ess A __ Search Total Entries 1 fron Subipe ManagementAdaress fi Type OI Taverising Pons 1 IPv4 10 90 90 90 iflndex 13612122134 NONE Figure 5 57 L2 Functions gt LLDP gt LLDP Management Address Table Management Address Specifies Pv4 or MAC address then enter the address Click Search and the table will update and display the values required Subtype Displays the managed address subtype For example MAC or IPv4 Management Address Displays the IP address IF Type Displays the IF Type OID Displays the SNMP OID Advertising Ports Displays the advertising ports L2 Functions gt LLDP gt LLDP Local Port Table The LLDP Local Port Table page displays LLDP local port information 50 5 Configuration D Link Web Smart Switch User Manual Port ID Subtype Port ID Port Description Figure 5 58 L2 Functions gt LLDP gt LLDP Port Settings Port Displays the port number Port ID Subtype Displays the port ID subtype Port ID Displays the port ID Unit number Port number Port Description Displays the port description Click View Normal or Detailed to displays more information L2 Functions gt LLDP gt LLDP Remote Port Table This LLDP Remote Port Table page is used to display the LLDP Remote Port Brief Table Select port number and click Search to display additional information pot n search PortlD 1 Remote Entities Count 0 NONE Normal View Normal Detailed
59. etwork stations or segments that are capable of being upgraded to 802 1w RSTP on all or some portion of the segment Edge Selecting the True parameter designates the port as an edge port Edge ports cannot create loops however an edge port can lose edge port status if a topology change creates a potential for a loop An edge port normally should not receive BPDU packets If a BPDU packet is received it automatically loses edge port status Selecting the False parameter indicates that the port does not have edge port status Selecting the Auto parameter indicates that the port have edge port status or not have edge port status automatically 40 5 Configuration D Link Web Smart Switch User Manual Priority Specify the priority of each port Selectable range is from O to 240 and the default setting is 128 The lower the number the greater the probability the port will be chosen as a root port P2P Choosing the 7rue parameter indicates a point to point P2P shared link P2P ports are similar to edge ports however they are restricted in that a P2P port must operate in full duplex Like edge ports P2P ports transition to a forwarding state rapidly thus benefiting from RSTP A p2p value of false indicates that the port cannot have p2p status Auto allows the port to have p2p status whenever possible and operate as if the p2p status were true If the port cannot maintain this status for example if the port is forced to half duplex operation the
60. feguard Engine Enabled Settings DHCP Client Disabled Settings IGMP Snooping Disabled Settings Single IP Manangement Disabled Settings Jumbo Frame Disabled Settings Power Saving Enabled Settings Figure 5 17 Device Information 25 5 Configuration D Link Web Smart Switch User Manual System gt System Settings The System Setting allows the user to configure the IP address and the basic system information of the Switch IP Information There are two ways for the switch to obtain an IP address Static and DHCP Dynamic Host Configuration Protocol When using static mode the IP Address Subnet Mask and Gateway can be manually configured When using DHCP mode the Switch will first look for a DHCP server to provide it with an IP address including network mask and default gateway before using the default or previously entered settings By default the IP setting is static mode with IP address is 10 90 90 90 and subnet mask is 255 0 0 0 System Information By entering a System Name and System Location the device can more easily be recognized through the SmartConsole Utility and from other Web Smart devices on the LAN Login Timeout The Login Timeout controls the idle time out period for security purposes and when there is no action for a specific time span in the Web based Management If the current session times out expires the user is required a re login before using the Web based Management again Selective range is from 3 to 30 min
61. firmware from file Figure 5 13 Tool Menu gt Firmware Backup and Upload 22 5 Configuration D Link Web Smart Switch User Manual HTTP Backup or upgrade the firmware to or from your local PC drive Click Backup to save the firmware to your disk Click Browse to browse your inventories for a saved firmware file Click Upgrade after selecting the firmware file you want to restore TFTP Backup or upgrade the firmware to or from a remote TFTP server Specify TFTP Server IP Address and File Name for the configuration file you want to save to restore from Click Backup to save the firmware to the TFTP server Click Upgrade after selecting the firmware file you want to restore A CAUTION Do not disconnect the PC or remove the power cord from device until the upgrade completes The Switch may crash if the Firmware upgrade is incomplete Tool Bar gt Smart Wizard By clicking the Smart Wizard button you can return to the Smart Wizard if you wish to make any changes there Tool Bar gt Online Help The Online Help provides two ways of online support Online Support Site will lead you to the D Link website where you can find online resources such as updated firmware images User Guide can offer an immediate reference for the feature definition or configuration guide D Link Support Site User Guide Figure 5 14 Online Help 23 5 Configuration imil Raging by sgwn Eyer a fo gn m mw im mom ui mn i Mm
62. gs Loopback Detection State Enable or disable loopback detection The default is Disabled Mode Specifies Port based or VLAN based mode Interval 1 32767 Set a Loop detection Interval between 7 and 32767 seconds The default is 2 seconds Recover Time 0 or 60 1000000 Time allowed in seconds for recovery when a Loopback is detected The Loop Detection Recover Time can be set at 0 seconds or 60 to 1000000 seconds Entering O will disable the Loop Detection Recover Time The default is 60 seconds From Port The beginning of a consecutive group of ports may be configured starting with the selected port To Port The ending of a consecutive group of ports may be configured starting with the selected port State Use the drop down menu to toggle between Enabled and Disabled Default is Disabled Click Apply to implement changes made or click Refresh to refresh the Loopback Detection table 37 5 Configuration D Link Web Smart Switch User Manual L2 Functions gt MAC Address Table gt Static MAC This feature provides two distinct functions The Disable Auto Learning table allows turning off the function of learning MAC address automatically if a port isn t specified as an uplink port for example connects to a DHCP Server or Gateway By default this feature is Disabled MAC Address Learning Enabled Disabled Static MAC Address Lists 7 Maximum 256 entries Por Figure 5 39 L2 Functions gt MAC Address Tab
63. irectly Group Name LL F Security Model v1 bs Read View Name Security Level Write View Name Notify View Name 7 indicates mandatory data Notify View EU Model Security Level Delete ReadOnly ReadWrite ReadWwrite NoAuthNoPriv ReadWrite ReadWrite ReadWrite ReadWrite v1 NoAuthNoPriv Figure 5 96 SNMP gt SNMP gt SNMP Group Group Name Specify the SNMP user group of up to 32 characters Read View Name Specify a SNMP group name for users that are allowed SNMP read privileges to the Switch s SNMP agent 69 5 Configuration D Link Web Smart Switch User Manual Write View Name Specify a SNMP group name for users that are allowed SNMP write privileges to the Switch s SNMP agent Security Model Select the SNMP security model v1 SNMPv1 does not support the security features v2c SNMPv2 supports both centralized and distributed network management strategies It includes improvements in the Structure of Management Information SMI and adds some security features v3 SNMPv3 provides secure access to devices through a combination of authentication and encrypting packets over the network Security Level This function is only available when you select SNMPv3 security level NoAuthNoPriv No authorization and no encryption for packets sent between the Switch and SNMP manager AuthNoPriv Authorization is required but no encryption for packets sent between the Switch and SNMP manager AuthPriv
64. is disabled DHCP Client Click Settings to link to System gt System Settings Default is disabled Single IP Management Click Settings to link to L3 Functions gt Single IP Management gt SIM Global Settings Default is disabled Power Saving Click Settings to link to System gt Power Saving Default is enabled SNMP Status Click Settings to link to SNMP gt SNMP gt SNMP Global Settings Default is disabled 802 1X Status Click Settings to link to AAA gt 802 1X gt 802 1X Global Settings Default is disabled Safeguard Engine Click Settings to link to Security gt Safeguard Engine Default is enabled IGMP Snooping Click Settings to link to L2 Functions gt Multicast gt IGMP Snooping Default is disabled Jumbo Frame Click Settings to link to L2 Functions gt Jumbo Frame Default is disabled Device Informati Device Information Device Type DGS 1500 28 System Time 07 01 2009 01 04 07 System Name System Up Time 6 days 1 hours 4 mins 21 seconds System Location MAC Address 00 15 00 28 0A 11 Boot Version 1 00 002 IP Address 10 90 90 90 Firmware Version 1 00 004 Subnet Mask 255 0 0 0 Protocol Version 2 001 004 Default Gateway 0 0 0 0 Hardware Version A1 Trap IP 0 0 0 0 Serial Number 00SQA15002811 Login Timeout minutes 5 Device Status and Quick Configurations RSTP Disabled Settings SNMP Status Disabled Settings Port Mirroring Disabled Settings 802 1X Status Disabled Settings Storm Control Disabled Settings Sa
65. k Web Smart Switch User Manual RX Duplicates the data that received from the source port and forwards it to the Target Port Click all to include all ports into port mirroring TX RX Duplicate both the data transmitted from and data sent to the source port and forwards all the data to the assigned Target Port Click all to include all ports into port mirroring None Turns off the mirroring of the port Click all to remove all ports from mirroring Click Apply to capture the configured Source Ports L2 Functions gt Loopback Detection The Loopback Detection function is used to detect the loop created by a specific port while Spanning Tree Protocol STP is not enabled in the network especially when the down links are hubs or unmanaged switches The Switch will automatically shutdown the port and sends a log to the administrator The Loopback Detection port will be unlocked when the Loopback Detection Recover Time times out The Loopback Detection function can be implemented on a range of ports at a time You may enable or disable this function using the pull down menu seLLHGCs id Loopback Detection Enabled Disabled Mode Interval 1 32767 2 sec Recover Time bo _ sec Apply 0 or 60 1000000 From Port To Port State UISaDled E Refresh Apply Loop Status Figure 5 38 L2 Functions gt Loopback Detection Settin
66. le gt Static MAC To initiate the removal of auto learning for any of the uplink ports enable this feature and then select the port s for auto learning to be disabled The Static MAC Address Lists table displays the static MAC addresses connected as well as the VID Click Add to add a new MAC address you also need to select the assigned Port number Enter both the Mac Address and VID and then Click Add Click Delete to remove one entry or click Delete all to clear the list By disabling Auto Learning capability and specifying the static MAC addresses the network is protected from potential threats like hackers because traffic from illegal MAC addresses will not be forwarded by the Switch L2 Functions gt MAC Address Table gt Dynamic Forwarding Table For each port this table displays the MAC address learned by the Switch To add a MAC address to the Static Mac Address List click the Add to Static MAC checkbox and then click Apply associated with the identified address Soforcuiarec a i j f Static MAC entries used maximum 0 256 18 0 MAC Address Figure 5 40 L2 Functions gt MAC Address Table gt Dynamic Forwarding Table 38 5 Configuration D Link Web Smart Switch User Manual L2 Functions gt Spanning Tree gt STP Global Settings The Switch implements two versions of the Spanning Tree Protocol the Rapid Spanning Tree Protocol RSTP as defined by the IEEE 802 1w specification and a version com
67. led and then click Apply to confirm the setting From Port To Port Admin State Max Learning Address 0 64 o Port Security Admin State Max Learning Address Figure 5 73 Security gt Port Security Security gt Traffic Seqmentation This feature provides administrators to limit traffic flow from a single port to a group of ports on a single Switch This method of segmenting the flow of traffic is similar to using VLANs to limit traffic but is more restrictive Forwarding Port Settings Enabled Disabled Figure 5 74 Security gt Traffic Segmentation Click Apply to enable or disable this feature 58 5 Configuration D Link Web Smart Switch User Manual To configure traffic segmentation specify a port or All ports from the switch using the From Port pull down menu and select To Port then click Apply to enter the settings into the Switch s Traffic Segmentation table Click Select All button to check all ports or click Clear button to uncheck all ports Security gt Safeguard Engine D Link s Safeguard Engine is a robust and innovative technology that automatically throttles the impact of packet flooding into the switch s CPU This function helps to protect the Web Smart Switch from being interrupted by malicious viruses or worm attacks This option is enabled by default Safeguard Engine State Enabled Disabled Apply D Link Safeguard Engine is a robust and innovative tech
68. lly on the device A defined set of variables managed objects is maintained by the SNMP agent and used to manage the device These objects are defined in a Management Information Base MIB which provides a standard presentation of the information controlled by the on board SNMP agent SNMP defines both the format of the MIB specifications and the protocol used to access this information over the network The default SNMP global state is disabled Select Enable and select Trap Settings then click Apply to enable the SNMP function SNMP Global State C Enabled Disabled Trap Settings SNMP Authentication Traps I Device Bootup Port Link Up Link Down l RSTP Port State Change l Firmware Upgrade State l Duplicate IP Detected CPU Utilization Apply Figure 5 94 SNMP gt SNMP gt SNMP Global Settings Trap Settings Specifies whether the device can send SNMP notifications 68 5 Configuration D Link Web Smart Switch User Manual SNMP Authentication Traps Specifies the device to send authentication failure notifications Device Bootup Specifies the device to send bootup notifications Port Link Up Link Down Specifies the device to send notifications when port linkup or link down RSTP Port State Change Specifies the device to send notifications when RSTP port state changes Firmware Upgrade State Specifies the device to send notifications when firmware upgrades Duplicate IP Detected Specifies the device to se
69. ment By choosing different functions in the Function Tree you can change all the settings in the Main Configuration Screen The main configuration screen will show the current status of your Switch by clicking the model name on top of the function tree At the upper right corner of the screen the username and current IP address will be displayed Under the username is the Logout button Click this to end this session X NOTE If you close the web browser without clicking the Logout button first then it will be seen as an abnormal exit and the login session will still be occupied 20 5 Configuration D Link Web Smart Switch User Manual Finally by clicking on the D Link logo at the upper left corner of the screen you will be redirected to the local D Link website Tool Bar gt Save Menu The Save Menu provides Save Configuration and Save Log functions m ave Toois Save Configuration save Log Figure 5 5 Save Menu Save Configuration Select to save the entire configuration changes you have made to the device to switch s non volatile RAM Please press the button to save the config of device Save Config Figure 5 6 Save Configuration Save Log Save the log entries to your local drive and a pop up message will prompt you for the file path You can view or edit the log file by using text editor e g Notepad Backup to file Backup Log Figure 5 7 Save Log Tool Bar gt Tool Menu The Tool
70. n access to sensitive data IEEE 802 1X provides a security standard for network access control especially in Wi Fi wireless networks 802 1X holds a network port disconnected until authentication is completed The switch uses Extensible Authentication Protocol over LANs EAPOL to exchange authentication protocol client identity such as a user name with the client and forward it to another remote RADIUS authentication server to verify access rights The EAP packet from the RADIUS server also contains the authentication method to be used The client can reject the authentication method and reguest another depending on the configuration of the client software and the RADIUS server Depending on the authenticated results the port is either made available to the user or the user is denied access to the network I AT Authentication State Enabled Disabled Forward EAPOL PDU Enabled Disabled Authentication Protocol Loca M Apply Figure 5 81 AAA gt 802 1X gt 802 1X Global Settings NOTE The Forward EAPOL PDU option is not workable when the Authentication State is Enabled AAA gt 802 1X gt 802 1X Port Settings The 802 1X Port Settings page provide users to configure the 802 1X Port settings _802 1X Port Settings SOQUEL 802 1X Port Access Control From Port To Port 2 _ jm QuietPeriod 0 65535 60 sec SuppTimeout 1 65535 Bo _ sec ServerTimeout 1 65535 3 sec MaxReg 1 10 2 times
71. nabled users can specifies the content of VLAN ID or VLAN Name or all Protocol Identity Specifies the Protocol Identity to be enabled or disabled in the LLDP port If select Enabled users can specifies the EAPOL LACP GVRP STP or ALL Click Apply to implement changes made and click Refresh to refresh the table information L2 Functions gt LLDP gt 802 3 Extension TLV The 802 3 Extension LLDP Port Settings page displays 802 3 Extension LLDP port information and contains parameters for configuring 802 3 Extension LLDP port settings 48 5 Configuration D Link Web Smart Switch User Manual MAC PHY E From Port To Port Configuration Status Power Via MDI Link Aggregation Maximum Frame Size 1 28 Disabled Disabled Disabled Disabled Refresh Apply Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disable
72. nd notifications when duplicate IP were detected CPU Utilization Specifies the device to send CPU utilization notifications SNMP gt SNMP gt SNMP User This page is used to maintain the SNMP user table for the use of SNMPv3 SNMPvsa allows or restricts users using the MIB OID and also encrypts the SNMP messages sent out between users and Switch SNMP Version v1 z Encrypt Auth Protocol MD5 u Password sid Privacy Protocol DES a Password _ 7 indicates mandatory data an Version Auth Protocol Privacy Protocol Delete ReadOnly ReadOnly None None ReadWrite ReadWrite v1 None None Figure 5 95 SNMP gt SNMP gt SNMP User User Name Enter a SNMP user name of up to 32 characters Group Name Specify the SNMP group of the SNMP user SNMP Version Specify the SNMP version of the user Only SNMPvsa encrypts the messages Auth Protocol Password Specify either HMAC MD5 96 or HMAC SHA to be the authentication protocol Enter a password for SNMPv3 encryption in the right column Priv Protocol Password Specify either no authorization or DES 56 bit encryption and then enter a password for SNMPva encryption in the right column Click Add to create a new SNMP user account and click Delete to remove any existing data SNMP gt SNMP gt SNMP Group The SNMP Group page is used to maintain the SNMP Group Table associating to the users in SNMP User Table SNMPv3 can control MIB access policy security policy for a user group d
73. ngTime 1 120 i hour Priority Mediur Apply Voice VLAN OUI Settings Description Telephony OUI Default OUI 3com 00 E0 BB 00 00 00 C User defined OUI QX XX XX XX XX XX 7 Maximum number of user defined OUI is 10 entries Add Description Telephony OUI OUI Mask Figure 5 32 VLAN gt Voice VLAN gt Voice VLAN Global Settings Voice VLAN State Select to Enable or Disable Voice VLAN The default is Disabled VLAN ID The ID of VLAN that you want to assign voice traffic to You must first create a VLAN from the 802 1Q VLAN page before you can assign a dedicated Voice VLAN The member port you configured in 802 1Q VLAN setting page will be the static member port of voice VLAN To dynamically add ports into the voice VLAN please enable the Auto Detection function Aging Time Enter a period of time in hours to remove a port from voice VLAN if the port is an automatic VLAN member When the last voice device stops sending traffic and the MAC address of this voice device is aged out the voice VLAN aging timer will be started The port will be removed from the voice VLAN after expiration of voice VLAN aging timer Selectable range is from 1 to 120 hours and default is 1 hour Priority The 802 1p priority levels of the traffic in the Voice VLAN The default priority is highest Voice VLAN OUI Settings this allows the user to configure the user defined voice traffic s OUI An Organizationally Unique Identifier OUI is the first
74. nology developed by D Link which will automatically throttle the impact of packet flooding into the switch s CPU It will Keep D Link Switches better protected from being too frequently interrupted by malicious viruses or worm attacks Figure 5 75 Security gt Safeguard Engine Security gt Storm Control The Storm Control feature provides the ability to control the receive rate of broadcast multicast and unknown unicast packets Once a packet storm has been detected the Switch will drop packets coming into the Switch until the storm has subsided Storm Control Settings Safeguard Storm Control C Enabled Disabled Storm Control Type N 1 16000 Threshold 64Kbps N 64Kbps 0 Kbps Apply Figure 5 76 Security gt Storm Control Storm Control Type User can select the different Storm type from Broadcast Only Multicast amp Broadcast and Broadcast amp Multicast amp Unknown Unicast Threshold If storm control is enabled default is disabled the threshold can be set here The threshold is from of 64 1 024 000 Kbit per second with steps N of 64Kbps N can be from 1 to 16000 Click Apply for the settings to take effect Security gt ARP Spoofing Prevention ARP spoofing also known as ARP poisoning is a method to attack an Ethernet network by allowing an attacker to sniff data frames on a LAN modifying the traffic or stopping the traffic known as a Denial of Service DoS attack The m
75. ole Enabled Disabled Destination IP l T Illegal Login T Device Bootup T Port Link Up Link Down l RSTP Port State Change l Firmware Upgrade State F Duplicate IP Detected F CPU Utilization Apply Figure 5 93 SNMP gt Trap to SmartConsole Destination IP Specifies the destination IP Illegal Login Specifies the device to send illegal login notifications Device Bootup Specifies the device to send bootup notifications Port Link Up Link Down Specifies the device to send notifications when port linkup or link down RSTP Port State Change Specifies the device to send notifications when RSTP port state changes Firmware Upgrade State Specifies the device to send notifications when firmware upgrades Duplicate IP Detected Specifies the device to send notifications when duplicate IP were detected CPU Utilization Specifies the device to send CPU utilization notifications SNMP gt SNMP gt SNMP Global Settings Simple Network Management Protocol SNMP is an OSI Layer 7 Application Layer protocol designed specifically for managing and monitoring network devices SNMP enables network management stations to read and modify the settings of gateways routers switches and other network devices Use SNMP to configure system features for proper operation monitor performance and detect potential problems in the Switch or LAN Managed devices that support SNMP include software referred to as an agent which runs loca
76. onfiguration settings as seen below GVRP Por Settings es O rd From Port To Port PVID 1 4094 GVRP Ingress Checking Acceptable Frame Type 4 z 2 ps Enabled S Admit Al s Apply F Figure 5 31 VLAN gt GVRP gt GVRP Port Settings From Port To Port These two fields allow user to specify the range of ports that will be included in the Port based VLAN that user is creating using the 802 1Q Port Settings page PVID 1 4094 The read only field in the 802 1Q Port Table shows the current PVID assignment for each port which may be manually assigned to a VLAN when created in the Settings table The Switch s default is to assign all ports to the default VLAN with a VID of 1 The PVID is used by the port to tag outgoing untagged packets and to make filtering decisions about incoming packets If the port is specified to accept only tagged frames as tagging and an untagged packet is forwarded to the port for transmission the port will add an 802 1Q tag using the PVID to write the VID in the tag When the packet arrives at its destination the receiving device will use the PVID to make VLAN forwarding decisions If the port receives a packet and Ingress filtering is enabled the port will compare the VID of the incoming packet to its PVID If the two are unequal the port will drop the packet If the two are equal the port will receive the packet GVRP The Group VLAN Registra
77. onth Day Enter the month DST and date DST will end on each year To HH MM Enter the time of day that DST will end on each year Click Apply to implement changes made L2 Functions gt LLDP gt LLDP Global Settings LLDP Link Layer Discovery Protocol provides IEEE 802 1AB standards based method for switches to advertise themselves to neighbor devices as well as to learn about neighbor LLDP devices SNMP utilities can learn the network topology by obtaining the MIB information in each LLDP device The LLDP function is enabled by default EE a CEE LLDP C Enabled Disabled Message TX Hold Multipier 2 10 Message TX Interval 5 32768 LLDP Reinit Delay 1 10 sec LLDP TX Delay 1 8192 sec Apply LLDP System Information Chassis ID Subtype macAddress System Name Figure 5 52 L2 Functions gt LLDP gt LLDP Global Settings LLDP When this function is Enabled the switch can start to transmit receive and process the LLDP packets For the advertisement of LLDP packets the switch announces the information to its neighbor through ports 46 5 Configuration D Link Web Smart Switch User Manual For the receiving of LLDP packets the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table Click Apply to make the change effective Message TX Hold Multiplier 2 10 This parameter is a multiplier that determines the actual TTL value used in an LLDPDU The d
78. ower Saving type to be LED Shut off Port Shut off Port Standby or System Hibernation LED Shut off The LED Shut off gets high priority If the user select LED Shut off the profile function will not take effect It means the LED can not be turned on after Time Profile time s up when the state is disabled On the contrary if the LED is enabled the Time Profile function will work Port Shut off The Port Shut off state has high priority the priority rule is the same as LED Therefore if the Port Shut off sate is already disabled the Time Profile function will not take effect Port Standby The system changes to standby state and wait for a wake up event Each port on the system enters sleep state by schedule System Hibernation In this mode switches get most power saving figures since main chipsets both MAC and PHY are disabled for all ports and energy required to power the CPU is minimal State Specifies the power saving state to be Enabled or Disabled Time Profile 1 Specifies the time profile or None Time Profile 2 Specifies the time profile or None Port Specifies the ports to be configure of the Power Saving Click Select All configure all ports or click Clear to uncheck all port Then click Apply to implement changes made 29 5 Configuration D Link Web Smart Switch User Manual VLAN gt 802 1Q VLAN A VLAN is a group of ports that can be anywhere in the network but communicate as though they were in the sam
79. patible with the IEEE 802 1D STP RSTP can operate with legacy equipment implementing IEEE 802 1D however the advantages of using RSTP will be lost The IEEE 802 1w Rapid Spanning Tree Protocol RSTP evolved from the 802 1D STP standard RSTP was developed in order to overcome some limitations of STP that impede the function of some recent switching innovations The basic function and much of the terminology is the same as STP Most of the settings configured for STP are also used for RSTP This section introduces some new Spanning Tree concepts and illustrates the main differences between the two protocols By default Rapid Spanning Tree is disabled If enabled the Switch will listen for BPDU packets and its accompanying Hello packet BPDU packets are sent even if a BPDU packet was not received Therefore each link between bridges is sensitive to the status of the link Ultimately this difference results in faster detection of failed links and thus faster topology adjustment After enabling STP setting the STP Global Setting includes the following options STP Global Settings Sf 8F Spanning Tree Protocol Enabled Disabled STP Version RSP E Maximum Age 6 40 2 sec Bridge Priority 3276 W Hello Time 1 10 2 sec Tx Hold Count 1 10 Forward Delay 4 30 15 sec Refresh Apply Root Bridge Information Root Bridge 00 00 00 00 00 00 00 00 Root Cost 0 Root Maximum Age 20 Root Forward Delay 15
80. ple Network Time Protocol is used by the Switch to synchronize the clock of the computer The SNTP settings folders contain two windows Time Settings and TimeZone Settings Users can configure the time settings for the switch and the following parameters can be set or are displayed in the Time Settings page Time Sett Clock Source Local C sNTP Current Time 09 01 2009 00 58 10 SNTP Server Settings SNTP First Server 0 0 0 0 SNTP Second Server 0 0 0 SNTP Poll Interval 30 99999 so _ Jsec Manually Time Settings Date DD MM YYYY 09 01 2009 Time HH MM SS 00 58 10 Sync To PC Date DD MM YYYY Time HH MM SS 16 24 16 Apply Figure 5 50 L2 Functions gt SNTP gt Time Settings Clock Source Specify the clock source by which the system time is set The possible options are Local Indicates that the system time is set locally by the device SNTP Indicates that the system time is retrieved from a SNTP server Current Time Displays the current date and time for the switch If choosing SNTP for the clock source then the following parameters will be available SNTP First Server Specify the IP address of the primary SNTP server from which the system time is retrieved SNTP Second Server Specify the IP address of the secondary SNTP server from which the system time is retrieved SNTP Poll Interval in Seconds 30 99999 Defines the interval in seconds at which the SNTP serv
81. r the Ciphersuite settings of the Switch By default SSL is Disabled and all Ciphersuites are Enabled 60 5 Configuration D Link Web Smart Switch User Manual SSL Se eS Safeguard SSL State C Enabled Disabled 7 HTTP will be disabled if SSL is enabled Apy SSL Ciphersuite Settings RSA NULL MD5 Enabled Disabled RSA NULL SHA1 Enabled Disabled RSA DES SHA1 Enabled Disabled RSA 3DES SHA1 Enabled Disabled DH RSA DES SHA1 Enabled Disabled DH RSA 3DES SHA1 Enabled Disabled RSA EXP1024 DES SHA1 Enabled Disabled Figure 5 79 Security gt SSL Settings y NOTE When SSL is enabled it will take longer time to open a web page due to encryption After saving configuration please wait around 10 seconds for the system summery page AAA gt RADIUS Server The Authentication RADIUS server page allows user to facilitate centralized user administration as well as providing protection against a sniffing active hacker _Authentication RADIUS Server Gefeguard Index 1 H IP Address Authentication Port 1 65535 Accounting Port 1 65535 Timeout 1 255 5 sec Retransmit 1 255 2 times Key 7 Maximum 32 characters Confirm Key OoOo _ Apply RADIUS Server List finder iPAddress fAuth Port JaccePot Timeout JRetransmit Key Delete ee ee ee es eae ees D Figure 5 80 AAA gt RADIUS Server Index Choose the desired RADIUS server to configure 1 2 or 3 I
82. rce of multicast packets This must be a multicast MAC address Port Settings Allows the selection of ports that will be members of the static multicast group and ports either that are forbidden from joining dynamically or that can join the multicast group dynamically using GMRP Member The port is a static member of the multicast group None No restrictions on the port dynamically joining the multicast group When None is chosen the port will not be a member of the Static Multicast Group 44 5 Configuration D Link Web Smart Switch User Manual L2 Functions gt Multicast gt Multicast Filtering Mode The Multicast Filtering Mode function allows users to select the filtering mode for IGMP group per VLAN basis VLAN ID Filtering Mode Forward Unregistered Groups Apply Multicast Filtering Mode Table Multicast Filtering Mode VLAN ID Forward Unregistered Groups 1 2 4094 Figure 5 49 L2 Functions gt Multicast gt Multicast Filtering Mode VLAN ID Specifies the VLAN ID Filtering Mode Forward Unregistered Groups The multicast stream will be forwarded based on the register table in registered group but it will be flooded to all ports of the VLAN in unregistered group Filter Unregistered Groups The registered group will be forwarded based on the register table and the unregister group will be filtered Click Apply to make the change effective L2 Functions gt SNTP gt Time Settings SNTP or Sim
83. re two types can be selected Static Static link aggregation LACP LACP Link Aggregation Control Protocol is enabled on the device LACP allows for the automatic detection of links in a Port Trunking Group Select the ports to be grouped together and then click Apply to activate the selected Trunking groups NOTE Each combined trunk port must be connected to devices within the same VLAN group L2 Functions gt Link Aggregation gt LACP Port Settings The LACP Port Settings is used to create port trunking groups on the Switch The user may set which ports will be active and passive in processing and sending LACP control frames 41 5 Configuration D Link Web Smart Switch User Manual aLACP Port Settings ID Safeguard From Port To Port Activity Timeout 01 28 Passive Short 3 sec x Apply Z i 01 Active Long 90 sec i 02 Active _Long 90 sec 03 Active Long 90 sec 04 Active Long 90 sec 05 Active Long 90 sec 06 Active Long 90 sec 07 Active Long 90 sec 08 iN Active _ Long 90sec _ 09 Active Long 90 sec 10 Active Long 90 sec 11 Active Long 90 sec 12 Active Long 90 sec 13 Active Long 90 sec 14 Active Long 90 sec 15 Active _Long 90sec _ 16 Active Long 90 sec 17 Active Long 90 sec 18 Active Long 90 sec 19 Active Long 90 sec 20
84. s MAC Address Ports and then click Add to create a checking filtering rule Click Delete to remove an existing rule and Delete All to clear all the entries Security gt DHCP Server Screening DHCP Server Screening function allows user to restrict the illegal DHCP server by discarding the DHCP service from distrusted ports This page allows you to configure the DHCP Server Screening state for each port and designed trusted DHCP server IP address Select Ports and then click Apply to enable or disable the function DHCP Server Trusted Port Settings Apply C R a sr eA e e e e R e A Y Trusted DHCP Server IP Settings IP Address Add Trusted DHCP Server IP Lists 7 Maximum 5 entries IP Address Figure 5 78 Security gt DHCP Server Screening To add the DHCP Trusted DHCP Server set the following fields and click Add IP Address Specifies the IP address of the DHCP server to be trusted Security gt SSL Secure Sockets Layer SSL is a security feature that provides a secure communication path between a Web Management host and the Switch Web UI by using authentication digital signatures and encryption These security functions are implemented by Ciphersuite a security string that determines the cryptographic parameters encryption algorithms and key sizes This page allows you to configure the SSL global state and the Ciphersuite settings Select Enable or Disable and then click Apply to change the SSL state o
85. s ARP Specifies the Send when IP Interface is up Send when duplicated IP is detected and Learn received Gratuitous ARP are enabled or disabled then click Apply to take effect Gratuitous ARP Send Interval Interface Name Specifies the Interface Name of Gratuitous ARP Time Interval 0 65535 Specifies the time interval for Gratuitous ARP Click Apply for the settings to take effect L3 Functions gt Single IP Management gt SIM Global Settings All switches are set as Candidate switches CaS as their factory default configuration and Single IP Management will be disabled The SIM Global Settings page provides user to change the device to be single IP management SIM Enabled Disabled __ Apply Role State Commander Candidate Discovery Interval 30 90 Bo Z oO OOOO sec Hold Time 100 255 sec Apply Figure 5 69 L3 Functions gt Single IP Management gt SIM Global Settings SIM enable or disable the SIM state on the Switch Disabled will render all SIM functions on the Switch inoperable Role State There are two states for the Role Commander and Candidate Commander Choosing this parameter will make the Switch a Commander Switch CS The user may join other switches to this Switch over Ethernet to be part of its SIM group Choosing this option will also enable the Switch to be configured for SIM Candidate A Candidate Switch CaS is not the member of a SIM group but is connected to a Commander Swi
86. t Switch User Manual MaxReg 1 10 This parameter specifies the maximum number of times that the switch retransmits an EAP request md 5challnege to the client before it times out the authentication session Default is 2 times ReAuthPeriod 1 65535 A constant that defines a nonzero number of seconds between periodic reauthentication of the client The default setting is 3600 seconds Port Control This allows user to control the port authorization state Select ForceAuthorized to disable 802 1X and cause the port to transition to the authorized state without any authentication exchange required This means the port transmits and receives normal traffic without 802 1X based authentication of the client If ForceUnauthorized is selected the port will remain in the unauthorized state ignoring all attempts by the client to authenticate The Switch cannot provide authentication services to the client through the interface If Auto is selected it will enable 802 1X and cause the port to begin in the unauthorized state allowing only EAPOL frames to be sent and received through the port The authentication process begins when the link state of the port transitions from down to up or when an EAPOL start frame is received The Switch then requests the identity of the client and begins relaying authentication messages between the client and the authentication server The default setting is Auto Direction Sets the administrative controlled
87. t ports only NOTE Please be sure that Power Saving feature is disabled before enabling Cable Diagnostics function Monitoring gt System Log The System Log page provides information about system logs including information when the device was booted how the ports are operating when users logged in when sessions timed out as well as other system information 7 Maximum 512 entries I I Y T O 1 Jan 13 22 58 02 2009 Successful login through Web IP 172 21 47 136 3 Jan 13 20 59 39 2009 Web session timed out IP 172 21 47 136 5 Jan 11 02 08 06 2009 Logout through Web IP 172 21 47 136 7 Jan 11 01 15 36 2009 Successful login through Web IP 172 21 47 136 Jan 11 00 27 53 2009 Web session timed out IP 172 21 47 136 Jan 10 01 23 07 2009 Logout through Web IP 172 21 47 136 Jan 10 00 47 14 2009 Successful login through Web IP 172 21 47 136 Jan 10 00 30 02 2009 Web session timed out IP 172 21 47 136 Jan 10 00 29 15 2009 Web session timed out IP 10 90 90 98 Jan 9 22 39 36 2009 Port 5 link up 100Mbps FULL duplex info pot5linkdown O if Jan 9 01 32 47 2009 Logout through Web IP 10 90 90 96 Jan 9 00 14 30 2009 Successful login through Web IP 10 90 90 96 9 11 13 15 17 19 Jan 9 23 59 14 2009 Management IP address was changed New IP 172 21 47 138 21 23 25 rig Jan 8 20 18 18 2009 Login failed through Web IP 10 90 90 137 Figure 5 109 Monitoring gt System
88. tch This is the default setting for the SIM role Discovery Interval 30 90 The user may set the discovery protocol interval in seconds that the Switch will send out discovery packets Returning information to a Commander Switch will include information about other switches connected to it Ex MS CaS The user may set the Discovery Interval from 30 to 90 seconds 55 5 Configuration D Link Web Smart Switch User Manual Hold Time 100 255 This parameter may be set for the time in seconds the Switch will hold information sent to it from other switches utilizing the Discovery Interval The user may set the hold time from 100 to 255 seconds Click Apply for the settings to take effect NOTE The function does not work with management switch QoS gt Bandwidth Control The Bandwidth Control page allows network managers to define the bandwidth settings for a specified port s transmitting and receiving data rates Bandwidth Control Se gut From Port To Port Type No Limit Rate 64 1024000 01 H 2 ps Rx Disabled _ Kbits sec Apply 7 On Gigabit port the Txrate is set as multiples of 1850Kbits sec No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit _ No Limit No Limit No Limit No Limit No Limit No Limit No Limit No Limit
89. tem Log Enabled or Disabled the SysLog Host feature Server IP Address Specifies the IP address of the system log server UDP Port 1 65535 Specifies the UDP port to which the server logs are sent The possible range is 7 65535 and the default value is 574 Time Stamp Select Enable to time stamp log messages Severity Specifies the minimum severity from which warning messages are sent to the server There are three levels When a severity level is selected all severity level choices above the selection are selected automatically The possible levels are Warning The lowest level of a device warning The device is functioning but an operational problem has occurred Informational Provides device information All Displays all levels of system logs Facility Specifies an application from which system logs are sent to the remote server Only one facility can be assigned to a single server If a second facility level is assigned the first facility is overwritten There are up to eight facilities can be assigned Local 0 Local 7 System gt Time Profile The Time Profile page allows users to configure the time profile settings of the device Time Profe Seti e Time Profile Profile Name Doo Y Time HH MM Start Time 00 00 y End Time 00 00 y Weekdays sun T Mon Tue Wed I Thu I Fri I Sat Date M FromDay 2011 1 Ali E Today 2011 _ E i Ail E Add Total Entries 1 Dlink 00 00 23 59 Mon Tue Wed Thu
90. tes a specific alarm Variable Specify the selected MIB variable value Rising Threshold 0 2431 1 Displays the rising counter value that triggers the rising threshold alarm Rising Event Index 1 65535 Displays the event that triggers the specific alarm The possible field values are user defined RMON events Owner Displays the device or user that defined the alarm 72 5 Configuration D Link Web Smart Switch User Manual Interval 1 2431 1 Defines the alarm interval time in seconds Sample type Defines the sampling method for the selected variable and comparing the value against the thresholds The possible field values are Delta value Subtracts the last sampled value from the current value The difference in the values is compared to the threshold Absolute value Compares the values directly with the thresholds at the end of the sampling interval Falling Threshold 0 2431 1 Displays the falling counter value that triggers the falling threshold alarm Falling Event Index 1 65535 Displays the event that triggers the specific alarm The possible field values are user defined RMON events Click Add to make the configurations take effects SNMP gt RMON gt RMON Event The RMON Event Configuration page contains fields for defining modifying and viewing RMON events Statistics Index 1 65535 li Description Type None Community Owner 7 indicates mandatory
91. three bytes of the MAC address This identifier uniquely identifies a vendor manufacturer or other organization Default OUI Pre defined OUI values including brand names of 3COM Cisco Veritel Pingtel Siemens NEC Philips Huawei3COM and Avaya User defined OUI You can manually create a Telephony OUI with a description The maximum number of user defined OUls is 10 It will occupy one ACL rule when selecting user defined OUI by default and to configure one user defined OUI will take extra one ACL rule System will auto generate an ACL profile Profile ID 51 for all the Voice VLAN rules 33 5 Configuration D Link Web Smart Switch User Manual There are some pre defined OUls and when the user configures personal OUI these pre defined OUIs must be avoided Below are the pre defined voice traffic s OUI ou Vendor mnemonic Name Select the OUI and press Add to the lower table to complete the Auto Voice VLAN setting Note The default OUI for 3COM Cisco Veritel Pingtel Siemens NEC Philips Huawei3COM and Avaya is not common for all of their VolP devices VLAN gt Voice VLAN gt Voice VLAN Port Settings The Voice VLAN Port Settings page allows users to automatically place the voice traffic from IP phone to an assigned VLAN to enhance the VoIP service With a higher priority and individual VLAN the quality and the security of VoIP traffic are guaranteed AN Fort settings afeguarc
92. tion Protocol GVRP enables the port to dynamically become a member of a VLAN GVRP is Disabled by default 32 5 Configuration D Link Web Smart Switch User Manual Ingress Checking This field can be toggled using the space bar between Enabled and Disabled Enabled enables the port to compare the VID tag of an incoming packet with the PVID number assigned to the port If the two are different the port filters drops the packet Disabled disables ingress filtering Ingress Checking is Disabled by default Acceptable Frame Type This field denotes the type of frame that will be accepted by the port The user may choose between Tagged Only which means only VLAN tagged frames will be accepted and Admit_All which mean both tagged and untagged frames will be accepted Admit_All is enabled by default Click Apply to implement changes made VLAN gt Voice VLAN gt Voice VLAN Global Settings Voice VLAN is a feature that allows you to automatically place the voice traffic from IP phone to an assigned VLAN to enhance the VoIP service With a higher priority and individual VLAN the quality and the security of VoIP traffic are guaranteed The Voice VLAN function will only insert the Voice VLAN tag to untagged packets under corresponding ports If a VoIP packet comes with a VLAN tag the Voice VLAN function won t replace the original VLAN tag Voice VLAN Global Setti Voice VLAN Enabled Disabled VLAN ID Agi
93. types of error 7 1 lf cable length is displayed as N A it means the cable length is Not Available This is due to the port being unable to obtain cable Iength either because its link speedis 10M or 100M or the cables used are broken and or bad in guality 2 The deviation of VCable Fault Distance is 2 meters therefore No cable may be displayed under Test Result when the cable used is less than 2 m in length 3 lt also measures cable fault and identifies the fault in Ienath according to the distance from this switch Figure 5 108 Monitoring gt Cable Diagnostic Test Result The description of the cable diagnostic results e OK means the cable is good for the connection Short in Cable means the wires of the RJ45 cable may be in contact somewhere e Open in Cable means the wires of RJ45 cable may be broken or the other end of the cable is simply disconnected Test Failed means some other errors occurred during cable diagnostics Please select the same port and test again Cable Fault Distance meters Indicates the distance of the cable fault from the Switch port if the cable is less than 2 meters it will show No Cable Cable Length meter If the test result shows OK then cable length will be indicated for the total length of the cable The cable lengths are categorized into four types lt 50 meters 50 80 meters 80100 meters and gt 100 meters NOTE Cable length detection is effective on Gigabi
94. u will see the screen below Building Networks for People Ba Ji A an 10 90 90 97 x Tools Wizard Help B Logout F 4 System VLAN L2 Functions Device Information L3 Functions Device Type DGS 1500 28 System Time 07 01 2009 00 37 35 Qos System Name System Up Time 6 days 0 hours 37 mins 49 seconds 2 System Location MAC Address 00 15 00 28 0A 11 B Boot Version 1 00 002 IP Address 10 90 90 90 SNMP Firmware Version 1 00 004 Subnet Mask 255 0 0 0 2 Monitoring Protocol Version 2 001 004 Default Gateway 0 0 0 0 Hardware Version A1 Trap IP 0 0 0 0 Serial Number 00SQA15002811 Login Timeout minutes 5 Device Status and Quick Configurations RSTP Disabled Settings SNMP Status Disabled Settings Function Tree Port Mirroring Disabled Settings 802 1X Status Disabled Settings Storm Control Disabled Settings Safeguard Engine Enabled Settings DHCP Client Disabled Settings IGMP Snooping Disabled Settings Single IP Manangement Disabled Settings Jumbo Frame Disabled Settinas Power Saving Enabled Settings Main Configuration Screen Figure 5 4 Web based Management The above image is the Web based Management screen The three main areas are the Tool Bar on top the Function Tree and the Main Configuration Screen The Tool Bar provides a guick and convenient way for essential utility functions like firmware and configuration manage
95. utes and the default setting is 5 minutes Group Interval The D Link Web Smart Switch will routinely send report packets to the SmartConsole Utility in order to maintain the information integrity The user can adjust the Group Interval to optimal frequency Selective range is from 120 to 1225 seconds and 0 means disabling the reporting function System Settings NN OO ued IP Information Static C DHCP BOOTP Interface Name VLAN Name defaut Interface Admin State Enabled H IP Address 10 90 90 90 Netmask 8 255 0 0 0 Ad Gateway 0 0 0 0 Apply System Information System Name System Location Login Timeout 3 30 minutes Group Interval 120 1225 seconds 120 Disable 0 second Apply Figure 5 18 System gt System Settings System gt Password The Password page allows user to change the login password of the device Old Password fo New Password Confirm Password Po 7 Maximum 20 characters Apply Figure 5 19 System gt Password To set the Password set the following parameters and click Apply Old Password If a password was previously configured for this entry enter it here in order to change it to a new password 26 5 Configuration D Link Web Smart Switch User Manual New Password Enter the new password that you wish to set on the Switch to authenticate users attempting to access Administrator Level privileges on the Switch The user may set

Download Pdf Manuals

Related Search

Related Contents

KRD 8000 - KEM Küppers Elektromechanik GmbH  User Manual - Flixcar.com  SML556 Elegante Solar Lamp Instructions  Model TR360 5-Beam Fiberoptic Probe Owner`s Manual    csc photocopieurs - Portail pouvoirs locaux  CYBEREYE Pendant Transmitters  FAX 03-5875-6176  iSense Security Module User Guide  

Copyright © All rights reserved. Failed to retrieve file