Home

User`s Manual - Freeviewshop.co.nz

1. When necessary press the MUTE button to turn on off the audio sound NOTE The mute function remains set while you change services 7 Pause PAUSE button is used to freeze the video Press PAUSE button once more to resume the video XCRUISE XDOSR385HO 8 Subtitle You can select the language for a Subtitle if the program pro vides subtitle information Press the SUBTITLE button on your remote control unit Select the desired subtitle lan guage then press OK button The subtitle will be displayed in the selected language at the bottom of the screen To turn OFF the subtitle from the screen Select Off from the subtitle language list NOTE When program does not provide subtitle information SUBTITLE button will not be active 9 Audio Control Press YELLOW button on live TV service to display Audio Control menu You can set Audio Track Sound Mode Sound Level Audio Track You can see all the audio track of the service you are watching Use the ARROW buttons to choose the preferred audio track If you select Auto audio track will play as what you set for audio language in language setting menu Sound Mode To set sound mode Stereo Mono Left Right Sound Level To set sound level Low 30 Normal High 30 Off XCRUISER NEWS 105 BUSINESS 02 SPORTS 106 TRAVEL 03 WEATHER 500 LIFESTYLE 04 TELEVISION 109 A Z INDEX 501 CAPTIONS doo LOT
2. Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not reverse the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen
3. Press EXIT button to exit from the recent service list b ONTHEWS 490 2 Information Window If you want to view the information of the current service that you are watching press INFO button Then the Information window will be displayed This Information window is automatically displayed when changing between the services This window contains much useful information such as service number service name scrambled types of service teletext subtitle Audio indication for Dolby Digital Time duration of the service and so on By pressing INFO button once again you can get more detailed information about the service 3 Multi Picture Display Press the BLUE button to display multiple pictures and use the RED button to select the display options for 9 or 12 multiple pictures 4 Electronic Program Guide EPG Electronic Program Guide EPG allows you to see program schedule and program infor mation from the service which includes this data as part of their transmission Multiple services will be shown with a time line of programming events The EPG supplies additional informa tion of channel service such as program listings start end times and detailed information about the program listings for all available services The avail ability and details of information of these program details can be XqQUISE XDOSR385HDO varied depending on the par ticular broadcasters individu
4. On Press UP DOWN ARROW button to display the simple service list while watching live TV Off If you set Off channel Up Down when you press UP DOWN ARROW button EPG Time scale You can set the time scale in hours which is displayed for a program in the EPG window Start MHW Epg Automatically You can set on MHW Epg to start automatically XCRUISER XDOSR385HO 2 4 Time Setting Time Setting To set the current time you can use two modes Auto or Manual Local Offset Enter the offset value by using the standardized information of current service area Daylight Saving If you want to apply daylight saving select the counter by using the ARROW buttons Clock Mode Select the type of clock display 12 Hours or 24 Hours using ARROW buttons Wake Up Mode Enter the time for the receiver to automatically power ON And you can choose one of Wake Up Mode as off or Once or Daily or Weekly Wake Up Date Select the date when the STB is turn on Press the 0K button to display calendar Wake Up Days Select a day of the week when the STB is turn on Wake Up Time Enter the wake up time of the STB using the NUMERIC buttons Wake Up Service Select the service when the STB is turn on Press the 0K button to display the service list Sleep Mode Enter the time for the receiver to automatically switch OFF and go to standby mode And you can choose one o
5. Press RED button to start download the plugin file that you want NOTE You can also download by Menu gt System Tools gt Data Transfer gt Data download from USB storage Plugin Menu REDbutton To set the plu gin Start Type You can select Auto or Manual GREEN button To Start the plugin You will see Started in State if the plugin is started BLUE button Press BLUE button if you want to delete the plugin file We provide a special feature called WebZeal which is for Web Browsing You can simply enjoy the WebZeal when you want web surfing Executing WebZeal with USB Storage device Stored the WebZeal file to the USB storage device Filename WebZeal 201xxxxx mnt Connect the USB storage device to your receiver then go to Menu gt System Tools gt Storage Manager Set the Current Device to File Mount Drive Set the Mount File Name to WebZeal 201xxxxx mnt Press Connect then go to Menu gt Utilities gt Plugin to start the WebZeal Os bets c ic sat tronto eyes Vea rn po Oro NOTE If you are using WebZeal by File Mount Drive current USB storage device will not allow to use PVR functions such as recording and time shift But it can be use when WebZeal is not in use WebZeal Option REDbutton Press to set the current web page as home GREENbutton Press to add the current web page to favorite YELLOW BLUE button Press to adjust the page
6. 4 Electronic Program Guide EPG nn 20 1 3 Service List Manager 33 5 E E 21 1 4 Data Transfer ae 34 6 Volume conio ao en rns nce ste ee rant 21 IR e DT ON EE 35 i Palla 21 21 Recording ODIOM EE 36 le 22 22 Parental Cono 37 Si Avdo CONTO aiar 22 23 Display Seting EE 37 10 iii 23 24 lime Setting eo 38 E PIP Picture in PICHUFe ssaiai rina 23 E ele E tte EE 38 2 0 ANSQUIPUESCHNO L la 39 PVR Personal Video Recorder Function rrrrrrrre ninna 24 Installation ppi eaniedssecsauseewenwgeiedasevsenieeweseeneniend 40 i RECO NING E 24 321 PE 40 1 1 Recording lt Lee ronzio pi 24 ee Eu EE 41 is Recording Edberg re 25 Ee ie 42 1 3 Long Time recording E 26 Od Network Seti G E 43 1 4 Pause during FECOLDING EE 26 39 System RECOVery rele 44 2 Tine SDN e EE 27 3 6 System Informati 45 3 Playback Play Lisi iii 28 UH 44 il Recorded RN GT 29 Al eer E 44 EN elei 29 42 Galdi inte 45 EC NR arizona irreali iraniani ita 29 4 3 CAS Conditional Access SysteM 45 SA PIO aio 29 44 Pil a 46 4 eu IN ini 30 EE 47 5 WGI TO sata recs acae setts temesnane AEEA EANES 30 40 Meemi 48 Menu lee eege eege 31 Troubleshooting im 49 Mam MenuofGuid lc 32 DEER 50 XqUISE 6 XDOSR385HO Precautions 1 Important Safety Instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions
7. 8 9 and 9 10 DVB S2 MPEG Transport Stream A V Decoding H 264 MPEG 4 part 10 MPEG 4 AVC and H26L MPEG II ISO IEC 13818 2 11172 2 MPEG 4 AVC MP L4 MPEG Il MP HL Max 80Mbit s 4 3 Letter Box 4 3 PanScan 16 9 720 x 576i 720 x 576p 720 x 480i 720 x 480p 1280 x 720p 1920 x 1080i 1920 x 1080p supports only HDMI Dolby Digital MPEG 1 Layer 1 2 and 3 Stereo Joint stereo Mono Dolby AC 3 32KHz 44 1KHz and 48KHz According to input STi chipset Flash ROM 32 Mbyte SDRAM 256 Mbytes EEPROM 256 bytes XqQUISE OT XDOSR385HDO Audio Video amp Data IN OUT RCA HDMI OPTIC RS 232C USB Ethernet IR extension Front Rear Panel Slot Buttons Indicators Power Supply Input Voltage Type Power Consumption Protection Physical Specification Size W x Hx D Weight Net Operating Temp Storage Temp CVBS Video Output Audio L R Output Video amp Audio Output AC 3 Dolby Digital SPDIF 9 pin D SUB Male type Transfer rate 115Kbps USB 2 0 Host Support TX 10 100M Base Removable IR extension Common interface amp 1 Smart Card Slot Rear 3 Buttons Standby CH UP DOWN 1 LEDs Standby Power and Remote DUAL TYPE AC 100 240V 50 60Hz ADAPTOR 12V 2A Max 24W Separate Internal Fuse amp Lighting protection 220mm A 35mm A 145mm 0 6 Kg 0 C 45 C 10 C 70 C Specifications and features are subject to change without prior notice
8. D C power socket Connects the adaptor XQUISE XDOSR385HO 3 Remote Control Unit 10 POWER Turns the STB On Off MUTE Resolution Turns the sound On Off To select the resolution format press and hold Resolution button You will see the resolution menu Each time you press the Resolution button the resolution changes in the following sequence 576i gt 576p gt 720p gt 1080i gt 1080p by pressing the Exit button it turns the sound On Off again Numeric Controls the numerical operation and service numbers directly Subtitle To show multilingual subtitle Teletext To show the digital teletext OK or Service List Show the service list in non menu mode and select an item or confirm in menu mode ARROW Buttons Up amp DownButtons To change the value of a selected item with preprogrammed values in menu Left amp Right Buttons To move the cursor left and right in menu Menu To enter the main menu or to move to the previous menu EXIT Exit from the menu or pop up window Play List To show the file list in the USB Storage Device or Network Storage Device XCRUISER 13 xXDSR385HD 20 Fast Forward Fasts forward at high speed Each time you press this button the speed is increased 21 Previous File To play the previous MP3 file in MP3 play mode This button is also used to jump back to beginning of recording during a playback 22 Recording To start Recording 23 Next File To
9. Using Single DISH Connect the Satellite AUDIO L RIN of TV Antenna cable to LNB IN TV NOTE The composite connection RCA cable is recommended for analogue TV You cannot view high definition video with the composite video connector XqUISE 17 XDSR385HD Using DiSEqC switch Connect the cable of DiSEqC Using DiSEqC motor Connect the cable of DiSEqC switch to LNB IN motor to LNB IN Satellite Dish EMISE Satellite Dish with DiSEqC motor XqUISE 18 XDSR385HD 5 Guide to mounting an STB on TV back panel Optional Install the mount bracket on back panel of TV using Mount your STB on the bracket the screws provided PLACEMENT The IR receiver should be located so that it is not directly facing a light source such as lamps or displays When mounted near a display it should be flush to the display and away from light reflections that may occur XqUISE XDOSR385HDO Guide of Functions 1 Selecting a Service To select the desired service channel please refer to the instructions below 1 1 Using CH UP DOWN buttons You can navigate between services by pressing CH UP DOWN buttons Whenever you press the CH UP DOWN button current service will be changed to next previous service Please press CH UP or CH DOWN button until you fine the service you want to watch 1 2 Using Service List To select the desired service in the service list you should firstl
10. Confirm Timer Settings automatically Lock Services All service lists modify an existing timer entry Message to On alarm will be shown on the left side To add new timer entry Press message will activate Or of the window the middle the GREEN button Timer Edit choose Off to disable will show the list of service window will popup You can e To modify existing timer entry to be locked By using the set the specific start date g y ARROW and 0K buttons you Choose the timer entry which you wish to modify and press the 0K button may move the chosen service to the middle window to lock time duration and service for its reservation And you can choose one of Timer Modes as that service Services can Once or Daily or Weekly To delete an existing timer entry also be moved back from the You can choose timer Choose the timer entry that middle to the left side to un operation type as Recording you want to delete and press lock them or just to Play the RED button XQUISE Move Services All service lists will be shown on left side of the window services to be moved will be shown on the middle window Move the service to the middle window by using the ARROW and OK buttons then the middle window service will be moved to a specified location when the desired location is selected from the left window Delete Services All service lists will be shown on left side o
11. Zoom In and Zoom Out as you want MENUbutton Press MENU button to show simple internet menu 4 5 FreeTV What is Free TV Free TV is a unique feature that enables you to play amp enjoy FREE web media contents like Youtube and other free but premium contents from various internet websites such as documentary and more So you can enjoy watching and also downloading various free web contents with our HD receiver Required settings To enjoy your great Free TV feature please make sure to check for the following conditions XCRUISER XDOSR385HDO STB Set top box should be connected with Ethernet cable with proper network settings Please refer to the menu of Network setting and its operating instructions USB or HDD storage requirement Mode USB or HDD storage Remark connection Playing Not Required For playing function no additional storage connection is required The internal Flash memory in the STB will be used automatically for the buffering of the contents being played Downloading Required The available web contents can also be downloaded to your USB or HDD storage connected If more than one storage devices are connected with the STB at the same time then the Downloaded files will be saved at the faster and bigger storage device automatically NOTE a Problems in network environment Problems such as flickering and freezing of the screen can occur while you
12. into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped WARNING To Prevent fire or shock hazard do not expose the set to rain or moisture 2 Notice These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus The mains plug is used as the disconnect device The disconnect device shall remain readily operable XqQUuISE XDOSR385HDO CAUTION FISK OF ELECTRA SHOCK DO NOT OPEN WARNING SHOCE HATAPD DO NOT OPEN AVIS REGUE DE CHOC ELECTRIGUE NE PAS OUVRIR A risk of shock to persons 3 Copyright This manual is protected by copyright laws Copy use and reproduction of this manual in part or whole without Manufacturer s prior written approval are prohibited The Lightning Flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the product enclosure that may be of sufficient magnitude to constitute a the product 4 Disclaimer The manufacturers distributors and agents are not liable to any kind of d
13. play the next file This button is also used to jump to end of recording during a playback 24 Color Buttons 11 12 13 14 15 16 17 18 19 Favorite To display the satellite group and the favorite groups EPG Electronic Program Guide Show the TV Radio program guide Recall Moves to previous service Volume Up amp Down To change the Volume Play Time shift Display the progress bar of playback when no progress bar is displayed Start playback with normal speed Return to normal speed from trick mode Channel Up amp Down To change service channel Pause This key is used to pause the video Press once more to resume the video Rewind Rewinds at high speed Each time you press this button the rewind speed is increased STOP To stop time shifting play back or recording 25 26 27 28 PIP Picture in Picture To set PIP window PIP Swap Switching between main picture and sub picture RED Used for special function in menu RED key is used to sort lists in service list or go to previous day search in EPG or make delete the current position as a bookmark GREEN Used for special function in menu Green key is used to set favorites setting in service list or go to the next bookmark position YELLOW Used for special function in menu Yellow key is used to find service in service list or change the audio track BLUE Used for special function in menu Blue key is us
14. Recording Event Scheduled Recording Instant Recording Press RECORD button to start recording instantly at anytime Time Scheduled Recording Event Scheduled Recording via EPG In Timer Settings menu you Inthe EPG menu screen you may set the time amp program can choose the event you wish to record your desired service to schedule or record program While watching the LIVE TV Go to Main Menu gt System screen press the EPG button to Tools gt Timer Settings access the EPG menu screen Press the GREEN button to acti Go to the event which vate the new timer edit screen YOU wish to view at the time indicated on the EPG schedule In the Timer Edit screen you may choose start date time duration service mode type Recording Play then simply press the Yes button to sched ule your recording event Please note that the minimum offset time of 3 minutes is required from the Start time amp current time for appropriate recording process to take place XqQuISE RIST RT then press 0K The event will be scheduled with the BLUE play icon This BLUE play icon means that you want to just watch the event at the scheduled time Press the 0K button one more time then the event will be scheduled with the RED dot icon This RED dot icon means that you want to record the Hroocnm Ciba BE BEA ze TT event at the scheduled time When you set an event for scheduled recording via t
15. TO id hava boon BYolded WLER ER LW o to Fly 10 Teletext When the TELETEXT icon on the INFO Banner press the TELETEXT button to view the teletext XDOSR385HDO 11 PIP Picture in Picture When you press the PIP button a sub picture screen will appear on the main screen view If you press the PIP button one more time the primary picture and the sub picture will appear together side by side with the same size The picture of the left side is the primary and the picture on the right side is sub If you press the PIP button one more time the sub picture will disappear In the PIP mode you can change primary and sub with the PIP SWAP button If you press the PAGE UP DOWN button the location of sub picture is changed If you press the PIP SERVICE LIST button you can see the list of services of sub picture You can change the service of the sub picture from the service list shown NOTE Changing services of sub the picture could be limited by the condition of the tuner connection or a recording event ongoing XqQUISE 24 XDOSR385HO PVR Personal Video Recorder Function Fi 1 Recording You can select a recording storage device with the following sequence Menu gt Configuration gt Recording Option gt Record Device Default is set to USB 1 1 Recording methods There are 3 type recording methods Instant Recording Time Scheduled
16. XCRUISER User s Manual XOSRIAI65H0D Full HD Digital Satellite Receiver Personal Video Recorder e Please read this User s Manual carefully before installing the receiver e This document is subject to update without perior notice e This document may be available in other languages Please visit our website http www xcruiser net XqQUISE 4 XDSR385HD INDEX Lalli 4 lt PEOGAULION S so 6 1 Important Safety Instruchons 6 L NON iaia errata operati violata dae 6 Dili 7 G MM e nn E 7 Oi Tedde E 7 O Before You Begim onci A 8 Ve RR ATA 8 C KE ee 9 Hardware Description eenegen degeegEeEegee eu 10 ee TTI 1 Front Panel Configuration DEE 10 2 Rear Panel Configuratii WE 11 Oe Remote Control UMIE orcs sesreccnosncencsnactaossnoss eno saskeatmeresssmunsemncnavsestoest 12 Connectingdiagram alari 14 1 Receiver to Adaptor cnc 14 2 Receiver to TV with Digital A V Output 14 3 Receiver to TV with Analog A V Output 16 4 Connecting to Antenna Cable 16 5 Guide to mounting an STB on TV back panel Optional 18 Guide of EREECHEN Eeer 19 1 Selecting ER 19 1 1 Using CH UP DOWN Buttons 19 12 Usmg Service List eisereen rana 19 1 3 USING Simple Service List 19 XCRUISER XDOSRI385HO 1 4 Using Recent Service st 20 System TOOS ioi ais 32 2 Information Window 20 11 Storage Nana 32 3 Multi Picture DISplay siisii ainia 20 t2 Timer Semn er ER netenks 33
17. al services Press the EPG button then the EPG menu will be displayed Use the ARROW buttons to move to other services or to see previous next guide Press the EPG button once to view full EPG with multi service list and press it twice to view the additional EPG information of a specific chan nel service Keep pressing the EPG button to toggle between the full and detailed menus of EPG Press the GREEN button to view next day EPG and the RED but ton to view EPG for a previous day Select the program by using the ARROW buttons then set the event timer by pressing OK You can schedule a recording with the EPG menu as follows Press RECORD button to sched ule the event This schedule can be checked in the menu of Timer Settings in the Sys tem tool menu To cancel the schedule of the recording press the 0K but ton for the appointed event To edit the schedule of the recording press the RECORD button for the appointed event 5 Favorite Group Press the FAV Favorite button to view all favorite groups such as sports movie drama satellite group and so on Scroll through the various favorite group using the UP DOWN ARROW buttons and select the desired favorite group by pressing 0K button 6 Volume Control To adjust the audio volume press the VOL UP DOWN but tons Audio volume control bar will be displayed at the top of the screen and disappear after 4 seconds
18. am Type Video PID Audio Stream Type Audio PID PCR PID 1 4 Data Transfer Transfer all System data to USB storage If you want to transfer and use BOTH of the current system parameters and service data in the future this menu will allow you to store all data to your USB device Press 0K button to store all current data to an external USB storage Transfer Service data to USB storage If you want to transfer and use ONLY the service data in the future this menu allows you to store current service data Press the 0K button to store the current service data to your external USB storage The service data can also be viewed and edited on a PC with an appropriate editor DrEdit for the file saved Data download from USB storage device This menu allows you to download the saved data from the external USB storage to your STB Press 0K button to download data NOTE If no USB device is connected USB slots then a Menu item will not be available XDOSR385HDO 2 Configuration 2 1 RecordingOption Alarm Confirm Message Turn ON this Alarm message to indicate and show the alert pop up message when there is a reserved recording event Alert message will show 3 minutes before starting time of reserved recording event Recording Stop Message Set On When you press the STOP button while recording then a confirmation window is displayed Set Off When you press the STOP button w
19. amage caused by the use of the information contained in this manual The instruction and descriptions which this manual contains are based on the time of this manual s production The manufacturer constantly updates it with new functions and technology All the specifications are subject to change without prior notice To reduce the risk of electric shock do not remove the cover or back No user serviceable parts are inside Refer servicing to qualified service personnel to alert the user to the presence of important operating and l The exclamation point within an equilateral triangle is intended maintenance servicing instructions in the literature accompanying 5 Trademarks Hom HID pepati on tb pre ATER ACE HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC XqUISE 1 MainFeatures rn Full HD Satellite PVR receiver e HDMI Video amp Audio Output 576i 576p 720p 1080i 1080p H 264 MPEG4 HD SD DVB S2 Compliant Recording amp Playback with External USB 2 0 Devices Recording and Time Shifting Simultaneously Event Recording by EPG USB 2 0 Host ports MP3 Player amp JPEG Viewer e Various Media File Format Playback Xvid file Playback 10 100 Base Tx RJ 45 port e 4 Digit Alphanumeric LED Display Before You Beg XDOSR385HO Fully compliant with DVB S2 Blind scan e Multi LNB Controlled by D
20. arch whole frequency Set Manual to search only desired frequency Polarity Select the polarity All Polarity Vertical Horizontal Search Type Select the search type Dish Setting Press the OK button to move to the Dish Setting menu directly XOSR3A85HD Start Search Press the OK button to start a search Fast Scan Select operator Press the OK button to select Operator Select HD SD Service Press the OK button to select HD SD Service Start Search Press the OK button to Start Search Advanced Search Mode Satellite Press the OK button to select the target satellite for search Frequency Select the frequency from the list to search XCtRuISE Symbol rate Enter the symbol rate by using the NUMERIC buttons Polarity Select the polarity Vertical Horizontal Video PID Enter the video PID using the NUMERIC buttons Audio PID Enter the audio PID using the NUMERIC buttons PCR PID Enter the PCR PID using the NUMERIC buttons Transmission You can select DVB and DVB S2 Start Search Press the OK button to start a search 3 4 Network Setting To use a Network connected to the STB Ethernet port you have to prepare the STB Network settings When the STB and a PC are connected via a network you can access the files of the STB storage device such as USB storage device NOTE If you use DHCP function of router you can set easily n
21. are watching the YouTube service These kind of problems can often occur due to the lagging and poor network status from your local internet service provider at home This may also cause the STB to be halted then we kindly recommend you to reboot your STB by resetting Power Control part Play Select the media content you wish to play and press OK button Settings Red button You can set Picture quality Unit seek time and Parental lock options Country You can change the available contents area where you would like to watch this option is only valid for YouTube Picture Quality High Medium Low Unit Seek Time Set Forward and Backward seeking time interval for 10 20 30 60 sec Parental Lock You can lock each contents and video downloading function with password Category Yellow button Press this Yellow button to view the list of categories then choose the one you prefer to watch in the list of contents Service Green button You can select among various free contents provided from web site Note Each web site is removable by pressing Green key on the list Download Recording button Web contents are available for download into USB or HDD storage NOTE If more than one storage devices are connected with the STBatthe same time then the Downloaded files will be saved at the faster and bigger storage device automatically Backward and Forward Rewin
22. can also change rewind speed with the REWIND button Press REWIND button to change the speed to x2 x4 x6 and x8 If you press the REWIND button again in it is at the x8 mode it returns to normal speed You may press the PAUSE button at any time to pause a pre recorded event Press the PAUSE button once again to resume play of the recorded event XCRUISER 31 1 Storage Manager 2 Timer Settings 3 Service List Manager 4 Data Transfer 1 Recording Option 2 Parental Control 3 Display Setting 4 Time Setting 5 Language Setting 6 A V Output Setting Installation gt Sl A gt Utilities Gi b XDOSR385HDO 1 Dish Setting 2 Positioner Setting 3 Service Search 4 Network Setting 5 System Recovery 6 System Information 1 Calculator 2 Calendar 3 CAS 4 Plugin 5 Free TV 6 Internet TV XqUISE XDOSR385HO Main Menu of Guide To display the menu press the MENU button at any time You can select the sub menus by using the ARROW buttons The selected sub menu becomes highlighted After selecting highlighting the sub menu you want to access press the 0K button If you want to return to the previous menu press the MENU button And if you want to exit from the menu press the EXIT button 1 System Tools 1 1 Storage Manager The items in this menu allow you to access and control the storage devices that you want Current Devic
23. ct a option for Delete New Folder Move to Folder Copy to Device Rename Lock Unlock You can select multiple files together and delete or move all of them at once Delete To delete file s New Folder To make new folder Default name of the folder is Group Moveto Folder To move the selected file s to a folder you want This option is XqQUuISE AN CH E Mm o u d i n a a T available if there is no folder Copy to Device To copy the file s to other storage device This option is not available if only one storage device is connected Rename To rename the folder or file Lock Unlock To lock and or unlock the file with your PIN Code You must select a file to do this option o majai J 3 2 Imported Files If you press RIGHT ARROW button in Recorded Files you can go to Imported File menu Locate the file s you wish to play with the UP DOWN button and press the OK button to enjoy the movie To choose a particular selection of files select a desired file and press the RED button Press the OK button to begin the selected files You can use the same Select Device Sorting and File Option features as in the Recorded Files 3 3 Music If you press the RIGHT ARROW button in Imported Files you can go to Music menu If you press the RECALL button you can enjoy music with Shuffle playback and repeat Y
24. d and Fast forward button playing Note Forward and Backward seeking interval can be set for 10 20 30 60 sec at Settings menu Full Screen Press OK button to view in full screen size XCRUISER XOSR3A85HD 4 6 Internet TV What is Internet TV Internet TV feature enables you to watch the Media contents being served from the Internet through a specific URL It is just like a web browsing but watching TV instead of web contents This feature is not only supporting the streaming of the live broadcast service but also supports FMS Flash Media Server and Wowza server RTMP Required settings All users are required to do the below settings before you can enjoy the Internet TV feature with your set top box STB STB should be connected with Ethernet cable with proper network settings Please refer to the menu of Network setting and its operating instructions Control part Play Select the service which you wish to play and press 0K button Add User can add the URL of the specific site which they want to watch And they can add more sites continuously Ka Install Type You can define the type of URL default Input URL A Title You can input the name of the media contents here A URL You can input the URL address that you would like to watch a Description You can define the description of contents here fa Media Type You can choose the type of Media s
25. e Select the storage device you want to access with the ARROW OK buttons Status You can see the information of current connected devices such as Mounted Not Available File System It shows the file system of the current device You can also select desired file system that you want when you format the device NOTE NTFS is the recommended file system to format and it will be also recognized in Windows system Total Displays total size of current device Free Displays free size of current device Format If you press the 0K button to format current device the device will be formatted with above file system NOTE When file system is Unknown the device will be formatted with NTFS XCRUISER 33 XDSR385HD Storage Check Check the If you choose Recording Press YELLOW button to enter 1 3 Service List Manager A en connected device it will start recording at that to Calendar Service List Manager menu Play List do OK ounen to time Press BLUE button if you want will appear when you press Hasan Play List menu If you choose Play it will to delete all the event s the OK button change and tune to the NOTE Ifyou reserve one or more You can select Edit Mode by 1 2 Timer Settings Eege that you wish to event through the EPG menu the pressing the YELLOW button l watch reserved event s will be added to N de o Insert a new timer entry Or If you set Alarm
26. e Check the signal level if this is low then tries adjusting the alignment of your dish See No Picture above e Check the volume level of the TV and STB Check the Mute status of the TV and STB Point remote control directly towards the STB Check that the STB button lights up when you press any button Check and replace batteries Check the LNB Replace the LNB if necessary Check the cable from the LNB Check the position of the dish realign dish if necessary If you are using a DiSEqC 1 0 switch check that you have connected and programmed the LNBs to the correct connections on the switch Check the Signal Level and the Signal Quality XCtRuUISER 50 xDSR385HD Tuner amp Channel Decoder Input Connector Loop through out Frequency Range Input IMpedance Signal Level LNB Power 22KHz Tone DISEqC Control Demodulation Input Symbol Rate FEC Decoder Transport Stream Profile Level Input Rate Video Formats Video Resolution Specifications Audio Decoding Audio Mode Sampling Rate Main System Main Processor Memory F type IEC 169 24 Female F type IEC 169 24 Female 950MHz 2150MHz 750 unbalanced 65 to 25dBm 13 18VDC max 400MA 22 2 KHz 0 6 0 2 V V1 0 1 2 USALS Compatible QPSK 8PSK 2 67 5 Ms s QPSK of DVB S 2 52 5 Ms s 8PSK of DVB S2 1 2 2 3 3 4 5 6 and 7 8 with Constraint Length K 7 DVB S 3 5 2 3 3 4 4 5 5 6
27. ed to set service list option in service list or display Multi Picture Page Up amp Down Move to the next or previous page if more than one page are available This button also is change the location of sub picture in PIP TV RADIO Switches between TV and Radio Information Shows the information of current program If you press one more detail information box will be shown PIP Buttons PIP Picture in Picture Service List To shown the sub picture service list XqUISE 14 XDSR385HD 1 Receiver to Adaptor Connect the A C power cord between A C power cord socket of receiver and A C outlet censo Satellite tuner Connecting diagram XCRUISER 15 XO0SRI385HO 2 Receiver to TV with Digital A V Output Connect the HDMI Cable to the HDMI Connector of the TV Connect SPDIF to Digital audio input of the equipment Digital Audio NOTE Depending on the A V equipment you own there are various ways you can HD content we recommend that you connect your high definition display with connect the STB To choose the best connection option please refer to the manual a HDMI cable HDMI supports standard enhanced or high definition video and of the equipment vou would like to connect to To aet Hiah Definition plavback of multichannel audio in a sinale cable XqQUISE 14 XDSR385HD 3 Receiver to TV with Analog A V Output 4 Connecting to Antenna Cable Connect the VIDEO and AUDIO L R to VIDEO IN and
28. ervice between the File and Live NOTE Supported protocols are RTMP RTMPT HTTP only The codec types supported in this Internet TV feature are Video MP1V MP2V MPEGAP2 MP4 H 264 VC1 Audio MP1A MP2A MP3A AC3 AAC PCM Edit You can edit the existing contents that you have Delete You can delete contents you have with this function Full Screen You can watch the contents with full screen size with this function XCtRUISER No Picture Poor picture quality No Sound Remote Control does not operate No or Bad Signal Troubleshooting 49 xDSR385HD Problem Solution Does not display any message op Check the main power cable and check that it is plugged into a suitable power the front panel outlet Check the STB main power switch ON at the rear of the STB See Does not display any message on the front panel above e To match the STB system with your TV system PAL NTSC press V Format button until a picture is displayed Check the video output port is firmly connected to the TV or VCR Check that you have selected the Video Input on your TV Press the STB button on the remote to assure you are controlling the STB and no other device with the remote Check the brightness level of the TV e Check the resolution that your TV supports and set the proper resolution with the remote Resolution button to obtain a picture See No Picture above
29. etwork configuration DHCP You can select On Off for the Dynamic Host Con figuration Protocol DHCP to 1 get the all configuration from the router Ifyou select On You will obtain the configuration from network and be set up automatically In this case the remaining item IP Address Subnet Mask Gateway First DNS Second DNS are automatically set and you don t have to configure them manually If you select Off You have to input the IP address manually together with the following data IP Address Subnet Mask Gateway First DNS Second DNS You can input the address with the OK button NUMERIC buttons and the LEFT RIGHT buttons You can move to the next item of Subnet Mast with the DOWN XDOSR385HDO button and you can configure the following items in the same Way Firmware Upgrade Server To Upgrade the firmware by downloading from a internet server NOTE Server installation and settings must be controlled by expert server manager A storage device must be connected with your receiver STB when firmware upgrade from server MAC Address This will display the MAC address of the STB Ethernet interface and is a fixed assignment unique to each STB Control of the files via the network and your PC XqQUuISE XDOSR385HO Check the IP Address of STB on the Network Setting menu Press Enter button on your PC after writing IP Address on the web brow
30. f the Wake Up Mode as off or Once or Daily or Weekly Sleep Date Select the date when the STB is turn off Press the 0K button to display the calendar Sleep Days Select a day of the week when STB is turn off Sleep Time Enter the turn off time of the STB using the NUMERIC buttons 2 5 Language Setting Menu Language Select the desired menu language by using the ARROW buttons NOTE The menu and operation languages can be changed depending on the country sold Available languages are subject to change without prior notice Audio Language Select the default language for the audio when changing services If no other language is provided then the default language of current will be automatically selected Subtitle Language Select the default language for subtitle when changing service XCRUISER 39 XDOSR385HDO Teletext Language Select the default language for Teletext User Font file Select a font you want to use NOTE To show and use the User Font please installa desired font file ttf to the Var Font directory folder in your PC which is connected with your receiver STB by network Then press LEFT RIGHT button to select a font and press OK button 2 6 A V Output Setting TV Type Select the TV types PAL NTSC Auto In Auto mode the STB is automatically selected to NTSC or PAL accordingly to the service played TV Aspect Ratio Se
31. f the window By using the ARROW and OK buttons you may select services to be deleted by placing them in the middle window The press the GREEN button to delete the selected services 34 Skip Services All services will be shown on left side of the window the middle window will only show the services that are chosen to be skipped By using the ARROW and OK buttons you may move the selected services from the left to middle window to skip them Set Favorite Services Use the ARROW and OK buttons to select your desired favorite XDOSR385HO group Once favorite group is chosen the left side window will show all service lists and the middle window will only show the selected services of the favorite group selected By using the ARROW and OK buttons you may ADD the desired services to a favorite group or DELETE any from the favorite group The name of the favorite group can be edited by pressing the GREEN button You can go to Select Favorite Group by pressing GREEN button In this mode you can select Lock Group Edit Group Name Add Group Delete Group XqQUuISE MN Service Lisl Manage Edit Services All services name will be shown on the left side of the window Move the highlighted bar to the service where you want to edit its name and press the 0K button for Edit Service menu Then move the highlighted bar which you want to edit You can edit Service Name Video Stre
32. guration data Reset Service data Maintain configuration data and reset the service data System restore to stored position Restore the stored values including service data and system parameters Press OK button to restore all data Store system data If you want to use system parameters and service data in the future this menu allows you to store current state Press 0K button to store current state Delete store position Delete stored system data 3 6 System Information This menu displays general information about the hardware and software version of your receiver XqQUuISE 4 Utility 4 1 Calculator To use the calculator highlight the calculator and press the 0K button 4 2 Calendar To display the calendar highlight the calendar and press the 0K button Utilize the ARROW buttons to choose the date If you press PAGE UP DOWN button you can see the past next month of the calendar 4 3 CAS Conditional Access System Smart Card Slot Conax smart card menu To watch scrambled services you need to have an appropriate Conax smart card from the service providers Insert a valid smart card into smart card slot only the bottom slot of the two is active The message of Smart card Initializing will appear on the screen After message disappears you can watch the service you want Smart card information You can view the current sta tus of smart card Select the s
33. he EPG menu It automatically sets a Timer Event in the Main Menu gt System Tools gt Timer Settings 1 2 Recording Edit Press REC button while recording to see the recording message window Yi Pause Select Pause Recording then press 0K to pause the current recording process Duration Set recording duration Press LEFT RIGHT ARROW button to change recording duration Stop Position Set the finishing time of recording Endof current event finish recording at the end of current event Endofnextevent finish recording at the end of next event NotAvailable EPG is not available XDOSR385HDO HIRSCH Record Slot When you are recording 3 services you can select Primary Secondary Tertiary by pressing Left Right Arrow button then go to Change Service and press OK button to show that recording service XqUISE XDOSR385HO 1 3 Long Time recording During lengthy time recording processes of 4GB Giga Byte or more additional files may be created per every 4GB For example aaa ts aaa ts1 aaa ts2 and so on You must remember not to delete any of duplicated file These files are only able to be viewed with your PC not with the receiver STB 1 4 Pause during recording When the PAUSE button is pressed during recording only the live video is paused but recording is continued at the selected recording device Menu gt Configuration gt Rec
34. hile recording the STB will stop the recording process immediately XtRuISE instantly without asking the additional confirmation from the user Extra Recording Time Before Start amp After Finish You can add extra recording time before start after finish Imin 2min 3min 4min Smin 1 Omin 1 5min off to scheduled recording events If you set an extra recording time by using the ARROW and OK buttons the scheduled recording event will have a Start Finish time of additional recording time added to the basic event This option only works for real time events But when you schedule a service recording in the Timer Settings menu this option has no affect TimeShift Start You can choose the method of TimeShift function Auto TimeShift function is automatically activated Off TimeShift function will be disabled Manual TimeShift will be activated when the Pause key is pressed TimeShift Duration You can adjust TimeShift duration in 30 minute intervals Off 30min 60min 90min 120min This duration defines the maximum time length of the TimeShift as long as the storage device has enough memory space left Playback Position Jump When you use LEFT RIGHT ARROW button to move back forward through the recorded time bar You can select the time intervals 10 Sec 30 Sec 1Min 2 Min 4 Min 10 Min Auto Playback Numeric Function This selection of func
35. iSEqC Control Version 1 0 1 1 1 2 and USALS Multi Satellite Search e Support EPG Electronic Program Guide On Screen Display with Full Color amp Resolution Favorite Service Groups e Powerful Service Control by Favorites Lock Skip Move and Delete Service Sorting by Alphabet Transponder and CAS e Multi language Supported OSD amp Menu Teletext Support Maximum 10 000 Services Programmable PIP Picture in Picture e Parental Lock System Lock Installation Lock e CVBS Video amp Audio Output via RCA e HDMI Video amp Audio Output Optical Output for Digital Audio SPDIF e Software amp Service Database update via USB and Ethernet port XCRUISER 9 XDSR385HD 2 Accessories User s Manual Remote Controller RCA cable Option AAA size batteries X2 HDMI cable USB hub Adaptor TV mount bracket Optional IR extension Optional gt rali e NOTE If any accessories listed above are missing contact the sales representative where you purchased this unit It is ready to be mounted behind of the TV Use the screws provided to hold the components in place XERUISE 10 XDSR385HD 1 FrontPanel Configuration KT MHD HEMI epes DI K xOSFsaesro e y LO o o 1 Display 4 STANDBY REMOTE Indication LED RED GREEN The 4 digit shows channel number or menu state in The LED RED lights on in standby mode The LED normal mode shows local time in standby
36. ic files and image files With the LEFT RIGHT ARROW button go to the Recorded Files Imported Files Music and Photo category and check amp for playback files in each category If press the PLAYLIST button you can see all playable files In this mode Green button is not in operation gt CT gt a D CI a not working And when you select the file you will not be able to select the different types of file format files together at once You can press LEFT RIGHT Arrow button to move to Recorded Files Imported Files Music Photo Play List menu 3 1 Recorded Files If you press RIGHT Arrow button in Play List you can go to Recorded Files menu Locate the recorded file s you wish to play with the UP DOWN button and press the OK button to playback the recorded file s SS ss ss HRRRR ee To choose a particular selection of files select a desired file and press the RED button Press the 0K button to begin the selected files Select Device Press PLAYLIST button one more time in the Playlist mode to see Select Device window and select the device which has the file you want to play NOTE Select Device window shows devices which are currently connected to the STB Su TTTTE Sorting If you press the YELLOW button you can sort the files by Time Name Size Type File Option If you press the BLUE button you can sele
37. ime Shifting You can select a storage device for a temporary file of the Time shifting with the following sequence Menu gt Configuration gt Recording Option gt TimeShift Device Default storage device is set to USB If pressing the PAUSE button during Time shift the live video is paused but the temporary recording for time shift is continued at the selected storage device Press the PAUSE button once again then the event will resume from the paused time While watching live TV press the PLAY TIMESHIFT button to show the play bar on your screen When the play bar is displayed on your screen you may use the LEFT RIGHT Arrow buttons to move freely through the recorded times bar If you press YELLOW button in the Play bar you can set the Position Jump time at Auto 10sec 30sec Imin 2min E j A Am P ich A AF LE FRE rr Rey uo Oe Se aad TALI S E KT mi i a A P Il wl 4min 10min Then press LEFT RIGHT Arrow button to jump as you set the time If you press the STOP button while time shifting the screen will be turned to a live TV channel You can also use PREV FILE button to move to a start location of the Time shifted file XqQUISE 28 XDOSR385HO You can playback many files with the Playlist which you access by the PLAYLIST button In the Playlist you can check and playback recorded files multimedia movie files MP3 mus
38. l level is given as an age based number Change Pin code To change your PIN code input the new PIN code using the NUMERIC but tons To verify the new PIN code input the new PIN code again System Set the access rights to the System menu Installation Set the access rights to the Installation menu Configuration Set the access rights to the Configuration menu Edit Service Set the access rights to the Edit menu Plugin Plugin Set the access rights to the Plugin menu 2 3 Display Setting Info Box position Set a position of the information window Info Box Display Time Set the time duration of the informa tion window being displayed on the screen after changing services Info Box Event Type Set the event type that display in left bottom part of the informa tion window Zapping Mode You can set the zapping mode as follows zapping mode is when changing services PresentEventwith Time Display the present event name with time Default Present and Follow Event Display the present and following event name Black screen Display a black screen when changing between services Volume Bar Display Time Set the time duration of the volume bar being displayed on the screen after changing audio volumes Freeze Display the last still picture when changing services Simple Service List To set the simple service list On to display or Off
39. layed Select the wanted satellite name If desired satellite name is not listed then select User Defined Frequency Select the satellite frequency you want to use to check for a signal Positioner Select the positioner None No Positioner Using DiSEqC 1 2 Move To move the dish press LEFT RIGHT button Fine Move To move the dish in smaller steps press the LEFT RIGHT ARROW button Step Set to positioner moving steps as 1 2 3 4 Positioner Command To use various positioner commands press the OK button Then available positioner commands will appear Using USALS Dish Longitude Enter the longitude position of the antenna using the NUMERIC buttons Dish Latitude Enter the latitude using the NUMERIC buttons Go To Press the OK button to rotate the dish to the selected antenna position Positioner Command To use various positioner commands press the OK button Then available positioner commands will appear Dish Setting Press the OK button to move to Dish Setting menu directly Service Search Press the OK button to move to Service Search menu directly XDOSR385HDO 3 3 Service Search Auto Search Mode Satellite Press the 0K button to select the target satellite to be searched Search Type Select the search type Network Search You can select Off or On When you select On you can find more transponders using the home network A
40. lect the aspect ratio of TV which is connected to the STB 4 3 16 9 This menu must be set prior to selecting the Display Format function Display Resolution Select the Display Resolution of the screen by using ARROW or OK button You can also change the resolution with Resolution button in the remote Each time you press the Resolution button the resolution changes in the following sequence 576i gt 576p gt 720p gt 1080i gt 1080p NOTE Please note that your TV may not show a picture depending on the Display Resolution set by your STB as well as if set to PAL when NTSC is required or vice versa If you set the Display Resolution as HD more than 576p your TV cannot display anything when the TV is connected to the Composite Video output of the STB In case of HDMI your TV can display a picture for all of the resolution settings of the STB But it is also possible that your TV may not display a picture with 576i because some HDTV s does not support 576i e Display Format In case of a 4 3 ratio TV set you can select Letter Box or Pan amp Scan In case of a 16 9 ratio TV set you can select Pillar Box or Full Screen 16 9 Display format on 4 3 TV set Letter Box You can see the full screen of 16 9 but top and bottom edges of your TV screen display black horizontal Pillars Pan amp Scan The picture is displayed in full on your 4 3 TV screen but left and right sides of the original picture ca
41. lot which you want to view using the ARROW buttons And press the OK button CAM Initializing To watch scrambled services you need to have a Common Interface Conditional Access Module CAM and an appropriate smart card from the provider Insert the CAM together with a valid smart card into Cl slot two slots available The message of CT Initializing will appear on the screen After the message disappears you can watch the service you want CAM information You can view the current status of CAM Select the slot which you want to view using the ARROW buttons and press the OK button If the CAM is available you can view information about each slot XDOSR385HDO NOTE The displayed information of each CAMS may be different depending on the CAM used Cl message 0n To display the Cl message on live TV service Off To disable the CI message on live TV service 44 Plugin If you have the program file for Plugin you can download the file s to Plugin then enjoy the program Download Plugin File In the USB storage please create a new folder name plugin and in this plugin folder create a folder name bin plugin gt bin XCRUISER XDOSR385HO Store Copy the plugin file in the bin folder Connect the USB storage to the receiver When Software Download menu is appeared then press LEFT RIGHT ARROW buttons to move to User Data Download mode
42. mode GREEN lights on when a key on the Remote Control 2 POWER Button TEE Press to switch between STANDBY and POWER ON 5 Remote Sensor modes Receives signal from remote controller 3 CH Up Down Button Press to change services in normal mode to move the highlighted bar UP DOWN in menu mode Hardware Description XqQUuISE 2 RearPanel Configuration 11 XDOSR385HDO IRextension The 2 5mm mini plug is connected to the IR Rec jack to use IR extension when XDSR385HD is mounted with optional bracket Front remote sensor will not be operated when IR Extension is connected PCMCIA To receive other pay tv service you need a CA Module Viaccess Irdeto Nagravison etc and a smart card from the service provider SMARTCARDREADER nsert smart card for encrypted service access 4 LNBIN Use to connect a satellite antenna LNB OUT Use it when connecting to another STB for loop through RS 232C Serial port for firmware update and data transfer Ethernet Local area network port for direct computer connection USB Use it when connecting to external USB storage device 9 HDMI Connects to the TV by using a HDMI cable for the best quality picture and audio 10 A V OUT Connects to the TV or VCR using a optional RCA cable Stereo audio output White Red Composite video output Yellow 17 SPDIF Connects to the audio system using a S PDIF cable digital audio 12
43. nnot be displayed 4 3 Display format on 16 9 TV set Pillar Box You can see the full screen of 4 3 but left and right sides of your TV screen display black vertical Pillars 4 3 FullScreen The picture is displayed in full on your 16 9 TV screen but left and right sides of the original picture is displayed with widening of the screen from left and right Because of the artificial widening the TV picture will be distorted Video Output Mode According to Display Resolution you can select the Video Output Mode In case of More than 576p HD The RGB output will be disabled automatically XCtRuUISER XDSR385HO HDMI Dolby Digital Set the Dolby Digital mode On or Off in status of HDMI output Dolby Digital Default Set the Dolby Digital Default mode On or Off If you set On Dolby Audio will play on the service that support Dolby Audio Sound Mode Set the audio mode output among the RCA jack optical SPDIF and HDMI Stereo Mono Left Right Power Saving in Standby Mode You can select the Power Saving in standby Mode Audio Sync Delay To adjust Audio Sync You can adjust from Oms to 400ms 3 Installation 3 1 Dish Setting Select the satellite antenna and LNB settings for service search The values that are set in this menu will be available for selection in other service searching menus Satellite Select the satellite which you want
44. ording Option gt Record Device Press PAUSE button once again and event will resume from the pause time During recording press the PLAY TIMESHIFT button to show the Play bar screen While the Play bar is shown on your screen you may use the LEFT RIGHT Arrow button to move forward amp backward freely within recorded time If you press YELLOW button in the Play bar you can set the Position Jump time at Auto 10sec 30sec Imin 2min 4min 10min Then press LEFT RIGHT Arrow button to jump as you set the time If you press the STOP button it will go to LIVE and you may press PREV FILE button to view the recorded file from the beginning STB can record up to 3 different services simultaneously When recording 3 services at the same time you can press the STOP button to see a message window of current recording status information If you select one of the 3 or 2 recordings and press the 0K button that recording service will be stopped fis gh re aie As da SCI e 3 CO If you press the STOP button during recording 1 service a recording stop message window will appear Then select YES to stop recording NOTE If you want the recording up to 3 services please format the storage devise with NTFS or JournaledUFS file system Menu gt Storage Manager gt Format gt File System gt select NTFS or Journaled JFS XCtRuUISER XDOSR385HDO 2 T
45. ou can use the same Select Device Sorting and File Option features as in the Recorded Files XDOSR385HDO 3 4 Photo If you press the RIGHT ARROW button in Music you can go to the Image Photo menu If you press the RED button or 0K button you can start the slide show of image files Press the EXIT button to stop slide show RED button Auto Slide show OKbutton Manual Slide show If you press the GREEN button you can adjust the Slide Time Repetition Title Down scale You can use the same Select Device Sorting and File Option features as in the Recorded Files XQUISE XDOSR385HO 4 Bookmark When the Play bar is displayed you may move to desired time and book mark it by pressing the RED button Bookmark s are indicated with a Green line on the play bar Also you may press the RED button to activate the play bar to mark your bookmark s When the play bar is on user can move jump between the bookmarks by pressing the If you wish to delete any Bookmarks go to that bookmark by pressing the GREEN button then press the RED button to delete the current bookmarks 5 Trick mode The user can change the speed of a fast forward play with FF Fast Forward button Press FF button to change the speed to x2 x4 x6 and x8 If you once again press FF button in its x8 mode it returns to normal x1 speed play You
46. s it refers to NIT during searching if there is the frequency information of other transponder it searches the other transponder besides the transponder that the user inputs XqQUuISE Time Calibration You can select Simple Full and Off to get TDT Time Data Table from each TP Dish Setting Press the OK button to move to Dish Setting menu directly Positioner Setting Press the OK button to move to the Positioner Setting menu directly Start Search Press the OK button to start search Manual Search Mode Satellite Press the 0K button to select the target satellite for search Frequency Select the frequency from the list to search Symbol rate Enter the symbol rate using the NUMERIC buttons Polarity Select the polarity Vertical Horizontal Search Type Select the search type Network Search You can select Off or On When you select On you can find more transponders using the home network As it refers to NIT during searching if there is the frequency information of other transponder it searches the other transponder besides the transponder that the user inputs Dish Setting Press the OK button to move to the Dish Setting menu directly Transmission You can select DVB and DVB S2 Start Search Press the OK button to start a search Blind Search Mode Satellite Press the 0K button to select multiple satellites Frequency Set Auto to se
47. ser address line Ex 192 168 01 10 storage You can see the folder name of USB in the Storage folder USB Rear USB Storage Device You may be able to load and retrieve data between the PC and the STB via the browser Dynamic settings RED key You can make your DDNS setting in this menu by pressing the RED button For more details about your DDNS settings please ask your local DDNS service provider Wireless LAN can be supported by using the USB to Wi Fi module connected Option By pressing the BLUE button you can automatically find and do the settings for AP For the details of Wireless Wi Fi settings please refer to the additional AP manual NOTE The speed of Wireless LAN is slower than the Wired LAN So it could take much more time when a file copy move functions are performed NOTE Inevitably only the limited types of Wireless LAN modules are supported So you MUST check for the compatible supported types BEFORE you purchase Currently supported types are RT73 series RT3070 series RT2870 series 3 5 System Recovery System restore to factory default Restore the factory set values in case the user has encountered some problems after changing any new parameters of service data and other parameters which may be in error Press the 0K button to erase all services and restore default setting Reset Configuration data Maintain the service data and reset the confi
48. tion defines the operation type of the NUMERIC buttons of your remote control unit RCU while the Playbar is displayed on the screen Commercial Skip When the NUMERIC buttons 1 to 9 are 36 pressed the video will move forward according to the NUMERIC buttons pressed For example when 7 is pressed 1min move forward 5 is pressed 5min move forward from current position When 0 is pressed it will move back for 1minute Percentage Move When the NUMERIC buttons are pressed the video will move to the location of that percentage of numbers pressed For example if you press 70 you will move to the 10 location of the total video length If you press 99 you will move to the end of the video clip recorded TimeShift Device You can select the TimeShift Device you wish to use USB Network Drive Record Device You can select the Recording device you wish to use USB Network Drive XDOSR385HO 2 2 Parental Control User s access rights to a service and programs are controlled by a 4 digit secret code that is defined by the user Whenever you attempt to access the parental control menu a pop up window will ask you to input a PIN code If necessary you can change it NOTE The default PIN code is 0000 XCRUISER XDOSR385HDO Censorship Set the parental guidance rating of highlight ed censorship classification The parenta
49. to do a search for Press the LEFT RIGHT ARROW button to select the satellite If you press the OK button the entire satellite list will be displayed Select the desired satellite name to search Ifthe desired satellite name is not listed then select User Defined Frequency Select the satellite frequency which you want to use for checking the signal LNB Power Select the LNB power on or off LNB Type Select the LNB type LNB Frequency Select the local oscillator L O frequency that is specified for the LNB used Use the LEFT RIGHT ARROW buttons to select the LNB frequency If the required LNB frequency is not listed then enter the frequency manually using the NUMERIC buttons When you select Universal LNB type both 9750 and 10600 are supported at the same time And then the LNB 22KHz setting is disabled LNB 22KHz When you use a separate coax 22 KHz tone switch box make the 22 KHz tone switch enabled or disabled to select the input you desire of the tone switch DiSEqC Switch If you use DiSEqC 1 0 or DiSEqC 1 1 switch select one of the DiSEgC inputs Service Search Press the OK button to move to the Search Menu XqQUuISE 3 2 Positioner Setting Satellite Select the satellite which you want to search for the Service Press the LEFT RIGHT ARROW button to select the satellite If you press the 0K button a complete satellite list will be disp
50. y display the service list by pressing the 0K button Use the ARROW buttons to select a desired service and press the OK button You can see that the service is changed in the small screen on the top right To watch that service press the 0K button once more To watch the previous service press the EXIT button In the Service List window you can also select additional functions with the COLOR buttons Press the RED button and you can sort the services by the Alphabet Transponder TP Group Tuner and CAS Conditional Access System Press the GREEN button and you can add the services to one of 10 Favorite List Press the YELLOW button and you can search amp find the service via a virtual keyboard Press the BLUE button and you can adjust service list option 1 3 Using Simple Service List If you press NUMERIC buttons or UP DOWN ARROW button instant service list will be displayed Select the desired service by using the ARROW button and press OK button to watch You can also enter the service number directly by using the NUMERIC button XqQUISE XDOSR385HO 1 4 Using Recent Service List To display recent service list press the RECALL button for a short time To return to the previous service that you were watching press RECALL button twice or for a longer time Choose the service from the recent service list use the ARROW button to select and then press the 0K button

User`s Manual - Freeviewshop.co.nz

Contents

Download Pdf Manuals

Related Search

Related Contents