Blazer 100
Contents
1. VMICROFM OLdZcr 100 100 mw Green Scanning Moving Head Laser System USER MANUAL MICROM ZAZE 100 User Instructions Page 1 Instructions Thank you for purchasing the MICROH 4 44Ze7 100 100 mw Green Laser System For the consideration of your safety and a better understanding of how to use this product please read this user s manual carefully and adhere to the guidelines to protect the user and others from the laser emission The dldaZef 100 Green Laser System utilizes an advanced design and high quality components It features a highly efficient optical system and a very sophisticated drive system This unit can be operated via DMX and linked to other units or run as a stand alone unit sound to light or auto single units or linked All aerial images look best with the use of atmosphere generated by a smoke machine or hazer SPECIFICATIONS Voltage 120VAC AC Frequency 60 Hz Power consumption 60 Watts Fuse 3A Laser Diode Semiconductor unit 100 mw output Wavelength 532nm Resistance gt 2 MQ Control Signal DMX 512 Pattern Trigger DMX Auto Strobe 0 6 times second adjustable Beam Angle Wide Angle adjustable Scan Pan 370 Tilt 265 e Size 370x275x375mm Net Weight 9 5 kg MICROM ZAZE 100 User Instructions Page 2 SAFETY INSTRUCTIONS Only qualified service technicans are authorized to do repairs on this unit There are no user serviceable parts i2. displayed press ENTER to confirm this selection and the unit is now ready to operate in the Sound Active mode To adjust the microphone sensitivity rotate the Sound knob in either direction to achieve the desired result When no sound is present the unit will stop moving and black out the laser diode The speed of the Sound Activated mode may be adjusted in the following manner Press the FUNC button and select function code 006 By using the UP and DOWN buttons the time of which the unit changes head movement and pattern can be altered the higher the value the more time it takes to change positions image patterns When multiple units are used in this mode you may link them together and have them operate in slave mode To have the other fixtures operate in slave mode use the FUNC button and select function code 004 press the UP button and then press ENTER to confirm All the fixtures will move according to the MASTER unit STAND ALONE OPERATION Make certain that there is no DMX signal present by removing any XLR input connections on the first unit in the chain To have the unit triggered by sound use the FUNC button and select function code 003 at this point press the UP button and YES will be displayed press ENTER to confirm this selection and the unit is now ready to operate in the Stand Alone mode When multiple units are used in this mode you may link them together and have them operate in slave mode To hav
3. an be linked together using the supplied 3 Pin XLR cable DMX Channel Channel Function PAN 0 370 TILT 0 265 Image Select Image flip animate on Y axis speed Image flip animate on X axis speed Image rotate speed Image size 0 largest 255 smallest Image blackout 0 Reset 100 Image on 255 00 Ni Od O1 A Go Po By using a DMX controller you can now have full control of the fixture In the table below are the Images that can be displayed and manipulated by using the Image flip animate and Image rotation function DMX VALUE IMAGE EFFECT TYPE 0 Triangle Graphic 15 HAPPY BIRTHDAY Text 30 Heart Graphic 45 Saw Blade Graphic 60 5 point Star Graphic 75 Square Graphic 90 Throwing Star Graphic 100 DANCE Text 125 Double Triangle mirrored Graphic 135 Fan Blade Graphic 145 Boomerang Graphic 155 8 point Star Graphic 170 Diamond Graphic 185 Arrow Graphic 200 Sine Wave Graphic 215 Cone Graphic 230 PARTY Text 245 Flying Bird Graphic 255 Cross Hairs Graphic MICROM ZAZE 100 User Instructions Page 5 SOUND ACTIVED OPERATION Make certain that there is no DMX signal present by removing any XLR input connections on the first unit in the chain To have the unit triggered by sound use the FUNC button and select function code 002 at this point press the UP button and YES will be
4. ated area make certain none of the vents are blocked on the unit Only replace the fuse with the same type and rating 3A The supplied bracket and M8 bolts are to be used when it is desired to hang the unit in the inverted position Attach the bracket to the bottom of the laser and make certain the M8 bolts are tightend appropriately The supplied safety cable should be securely attached to the cable flange and secured on the other end to a structure such as lighting truss MICROM ZAZE 100 User Instructions Page 3 OPERATING INSTRUCTIONS This unit may be used with or without a DMX controller Every time the unit is powered on it will undergo a reset and home The laser system will be ready for use once this reset is complete At power up the LED NUMERICAL DISPLY will show the current function mode and the RED small LED beside the numerical display indicates the unit is powered up properly and is now ready for use The BLUE LED indicates the DMX signal is present The PATTERN SIZE knob varies the size of the image being displayed to best suit your application For best results you may turn this knob to FULL The SOUND knob varies the audio sensitivity when it is in Sound Active mode By pressing the FUNC button you will be able to select all the different functions available Function Code Function Description 001 DMX Control 002 Sound Activated Control 003 Auto Stand Alone 004 Slave Ope
5. e the other fixtures operate in slave mode use the FUNC button and select function code 004 press the UP button and then press ENTER to confirm All the fixtures will move according to the MASTER unit MASTER SLAVE CONNECTION UNIT 1 UNIT 2 UNIT 3 Output and input connect together Qutput and input connect together MICROH ZAZE 100 User instructions Page 6 APPENDIX Adapting 5pin XLR to 3pin XLR configurations 3 pin canon connect to the input of DMX512 connection OUTPUT INPUT Pin 1 Screen Pin 2 Signal 9 T I Pa Signals Vo 3 3 TROUBLESHOOTING PROBLEM SOLUTION Red LED not lighting up Make certain the unit is plugged into a known working 120 VAC Power indicator supply The female end of the power cable must be fully inserted into the power entry point of the unit If the external fuse is blown only replace the fuse with the same type and rating 3A If the fuse continues to blow the unit must be sent in for service No control with DMX Make certain that the BLUE LED is on which indicates DMX signal is present If the DMX operation is erratic check to see that the polarity of your DMX controller is set to Pin 2 and Pin 3 Test to make certain that the XLR cable is functioning properly No laser output When operated in DMX mode make certain that the Blackout function of the controller is not enabled and that the fader that operates Channel 8 is all the way up DMX value o
6. f 255 In Sound Active mode make certain that the sensitivity knob is turned up according to the sound you are trying to pick up The unit blacks out when no audio is present Unit stutters when reset This is normal behaviour the pan and tilt motors learn the home position after a few moments and smooth pan and tilt will result
7. nside this unit Correct primary voltages must be used 120VAC Do not block any of the ventilation of this laser system while it is in operation Do not use or store any flammable or explosive products ie pyrotechnics near this laser equipment Do not place your hand directly in front of the laser beam Minimum distance between laser output and any object is 1 meter To avoid serious eye injury do not look directly into the laser beam Point the laser effect in a safe manner towards the desired location PACKAGE CONTENTS ZLAZER 100 Green Laser Moving Head Light AC Power cable 120VAC User manual Mounting Bracket 2xMB8 allen head bolts Safety cable XLR Cable INSTALLATION INSTRUCTIONS This laser product is suitable for indoor use only The normal operating temperatures ambient must be below 35C A qualified technician should be familiar with all safety aspects and user functions before installing and using this product Safe hanging procedures should be followed including the use of the supplied safety cable Inspect all the equipment and verify that there has not been any damage caused by transportation Connect the AC power plug into the connector on the back of the laser Connect a DMX compatitble controller to the XLR input connector on the back of the laser otherwise it may be used in a stand alone function The laser may now be plugged into an appropriate AC power source Install the laser system in a well ventil
8. ration 005 DMX Address 006 Sound Active speed setting 007 Reset 008 009 Not used DMX OPERATION After the unit is powered up and a DMX controller is plugged into the unit the blue LED will light indicating that DMX signal is present To select the DMX address press the FUNC button several times do not hold the button to advance to the next code and select Function Code 005 at this point you are now able to change the DMX address by using the up and down buttons The display will show the current DMX address This unit uses 8 Channels of DMX to operate If you would like to select this unit to be the first in your DMX address you would select a starting address of 0 You may use the table below as an example If you are using an American DJ or LSC DMX Operator you must use the address structure for that particular controller ie Unit 1 would have an address of 0 Unit 2 would have an address of 16 Unit 3 would be 32 etc FIXTURE DMX ADDRESS 1 0 2 8 3 16 4 24 MICROH ZAZE 100 User instructions Page 4 Once you have selected the DMX address use the FUNC button and select function code 001 now press the UP button to confirm the unit will always power up in the DMX mode The LED display will show YES at this point press the ENTER button to confirm your selection Once this procedure is completed it will always power up in DMX mode with the address you ve selected Multiple units c
Download Pdf Manuals
Related Search