ElEctric PEn driVE sYstEm
Contents
1. 14 DePuy Synthes Power Tools Electric Pen Drive System Reference Guide RECIPROCATING SAW ATTACHMENT Inserting a saw blade or rasp Instruments 05 001 040 Reciprocating Saw Attachment 05 001 074 Handhold for Tool Change Turn the release ring on the attachment clockwise until it locks in place Insert a saw blade or rasp into the coupling turning it slightly to align the keyway The instrument will automatically lock in place Pull lightly on the instrument to confirm that it IS Secure Electric Pen Drive System Reference Guide DePuy Synthes Power Tools 15 OSCILLATING SAW ATTACHMENT Instruments 05 001 038 Oscillating Saw Attachment 05 001 074 Handhold for Tool Change Pull back the collar of the attachment Insert a saw blade into the saw blade coupling and move it into the desired position Release the collar Pull lightly on the saw blade to confirm that it is secure 16 DePuy Synthes Power Tools Electric Pen Drive System Reference Guide BURRING SPEED ATTACHMENTS DePuy Synthes Power Tools recommends using a new burr tor each surgery as used burrs may increase the risk of necrosis and increase the cutting time All burrs are sold sterile Burrs should only be used with the attachment for which they were intended or with an attachment one size shorter than the burr For example a medium burr sh2. DePuySynthes POWER TOOLS ELECTRIC PEN DRIVE SYSTEM Reference Guide INDICATIONS The Electric Pen drive is indicated for screw insertion pin and wire placement cutting of bone and metal drilling reaming decorticating shaping and smoothing of bones and teeth in a wide variety of surgical procedures including but not limited to general orthopaedic trauma foot hand maxillotacial neurosurgical oral otolaryngological reconstructive and spine surgery Caution Please review the Electric Pen Drive User s Manual prior to use for indications and other important information Electric Pen Drive System Reference Guide DePuy Synthes Power Tools 1 CONSOLE Slide control For adjusting maximum speed for Drive Unit 2 Slide control For adjusting maximum speed for Drive Unit 1 ON OFF LED Connector For Light Adaptor for Small Battery Drive Small Battery Drive Il Connector For Drive Unit 1 Connector For Drive Unit 2 ES Maik Torque limiting Irrigation y vi ALLIT w o Heel TIR VME 266 O 3 q w a A ORA ae t standard Console Wipe clean only with a cloth moistened with disinfectant Do not immerse rinse or sterilize Selection switch For torque limiting Selection switch For irrigation Flow rate adjustment knob For irrigation Irrigation pump Connector For Foot Switch 2 DePuy Synthes Power Tools Electric Pen Drive System R
3. J latch coupling 05 001 044 45 Drill Attachment AO coupling 05 001 110 Drill Attachment hex coupling Pull back the collar of the attachment and insert the instrument turning it slightly to align the keyway Release the collar of the attachment and pull lightly on the instrument to confirm that it is secure Electric Pen Drive System Reference Guide DePuy Synthes Power Tools 9 DRILLING SPEED ATTACHMENTS continued Inserting an instrument in 90 Drill Attachment Instruments 05 001 035 90 Drill Attachment short mini quick coupling 05 001 036 90 Drill Attachment long mini quick coupling Move the locking lever of the attachment to the side as indicated by the arrow on the attachment 10 DePuy Synthes Power Tools Electric Pen Drive System Reference Guide DRILLING SPEED ATTACHMENTS continued Insert the instrument turning it slightly to align the keyway Lock the instrument in place by pushing the locking lever back Pull lightly on the instrument to confirm that it is secure Electric Pen Drive System Reference Guide DePuy Synthes Power Tools 11 SCREW INSERTION ATTACHMENTS Inserting an instrument Instruments 05 001 028 Screw Attachment AO coupling 05 001 029 Screw Attachment hex coupling 05 001 034 Screw Attachment mini quick coupling Pull back the collar of the attachment and inser
4. Correct Incorrect Electric Pen Drive System Reference Guide DePuy Synthes Power Tools 19 DRILL BURR ATTACHMENT Instrument 05 001 123 Drill Burr Attachment for 2 35 mm shafts This attachment is available for users who wish to use burrs and drill bits with a 2 35 mm diameter round shaft To insert the cutting tool into the attachment follow the steps described for the burring attachments that use the DePuy Synthes Power Tools Electric Pen Drive cutting tools To ensure proper fixation the cutting tool must be inserted at least 20 mm deep into the attachment and the attachment locked in place 20 DePuy Synthes Power Tools Electric Pen Drive System Reference Guide SMALL ELECTRIC DRIVE Instruments 05 001 175 Small Electric Drive 05 001 186 Quick Coupling for Kirschner Wires Use of the Small Electric Drive with the Electric Pen Drive console adds the adaptability of a pistol shaped handpiece To connect the adaptor cable to the console align the red dot on the plug with the red dot on the connector for the Small Electric Drive Rand push the plug into the connector Do not force the plug into the connector as this may damage the plug and or the console For complete instructions on the use of the Small Electric Drive see the User s Manual Electric Pen Drive System Reference Guide DePuy Synthes Power Tools 21 LIGHT ADAPTOR FOR SMALL BATTERY DRIVE Instrum
5. e switch on the Drive Unit or the On Lock switch on the Hand Switch should be in the Lock position when inserting or removing attachments or instruments e Turn the release ring clockwise until it locks in the open position The release ring will protrude slightly from the main body of the Drive Unit e Insert the attachment into the coupling aligning the position pins of the attachment with the grooves on the release ring e Press the attachment lightly against the Drive Unit The release ring will lock automatically e Pull lightly on the attachment to confirm that it is secure Electric Pen Drive System Reference Guide DePuy Synthes Power Tools 7 ATTACHMENT REMOVAL While holding the Drive Unit with the attachment facing up turn the release ring clockwise until it locks in the open position Remove the attachment The release ring should stay in the open position ready for the next attachment 8 DePuy Synthes Power Tools Electric Pen Drive System Reference Guide DRILLING SPEED ATTACHMENTS Inserting an instrument Instruments 05 001 030 Drill Attachment mini quick coupling 05 001 031 Drill Attachment J latch coupling 05 001 032 Drill Attachment AO coupling 05 001 033 45 Oscillating Drill Attachment mini quick coupling 05 001 042 45 Drill Attachment mini quick coupling 05 001 043 45 Drill Attachment
6. eference Guide CONSOLE SETUP e Confirm that the power switch is in the OFF o position e Connect the console to a power outlet using the supplied electrical cord e Turn on the console by setting the power switch to the ON I position e The LED marked on the front of the console will illuminate indicating that the console is under power e To connect the cable for the Drive Unit align the red dot on the metal plug with the red dot on the connector and push the plug into the connector e To remove the cable retract the release sleeve on the plug and pull back e Do not pull on the cord to disconnect as this may damage the cable or console Electric Pen Drive System Reference Guide DePuy Synthes Power Tools 3 DRIVE UNIT SETUP Always slide the lock in the direction of the arrows before turning the mode switch The lock will automatically return to the locked position To insert the black plug into the Drive Unit ensure that the mode switch on the Drive Unit Is in the cable insertion removal b position Align the groove on the plug with the notch in the mode switch and insert the plug Once the cable connector is inserted turn the mode switch to the lock A position The cable is now firmly locked into the Drive Unit and the Drive Unit is in the off mode To remove the cable return the switch to the cable inser tion removal position and pull gently on the plug Do no
7. ents 05 001 108 Light Adaptor for Small Battery Drive 532 1107 Small Battery Drive Il The Light Adaptor for Small Battery Drive allows the user to power the Small Battery Drive Il Handpiece with the Electric Pen Drive Console Insert the adaptor into the Small Battery Drive Il Handpiece contirming the contacts on the adaptor align with the contacts in the recess of the Small Battery Drive Il Handpiece Press firmly to ensure the adaptor Is engaged correctly and check by pulling handpiece lightly downward on the adaptor For safety the adaptor can be inserted fully only when in the correct orientation Can also be used with 532 010 Small Battery Drive 22 DePuy Synthes Power Tools Electric Pen Drive System Reference Guide LIGHT ADAPTOR FOR SMALL BATTERY DRIVE continued Connecting Light Adaptor for Small Battery Drive to console To connect the adaptor cable to the console align the red dot on the plug with the red dot on the connector for the Small Battery Drive J and push the plug into the connector Do not force the plug into the connector as this may damage the plug and or the console Electric Pen Drive System Reference Guide DePuy Synthes Power Tools 23 Limited Warranty and Disclaimer DePuy Synthes USA products are sold with a limited warranty to the original purchaser against defects in workmanship and materials Any other express or implied warranties including
8. ould only be used in a medium or a short attachment Long burrs can be used in the long and medium attachments as well as the XL and XXL attachments Use only DePuy Synthes Power Tools burrs The use of other cutting tools voids the device warranty Instruments 05 001 045 Burr Attachment short 05 001 046 Burr Attachment medium 05 001 047 Burr Attachment long 05 001 048 Burr Attachment short angled 05 001 049 Burr Attachment medium angled 05 001 050 Burr Attachment long angled 05 001 055 Burr Attachment XXL angled 05 001 063 Burr Attachment XL angled 05 001 074 Handhold for Tool Change Electric Pen Drive System Reference Guide DePuy Synthes Power Tools 17 BURRING SPEED ATTACHMENTS continued Attach the burring attachment to the Drive Unit or insert it in the Handhold for Tool Change Turn the release ring of the burring attachment to the UNLOCK position 18 DePuy Synthes Power Tools Electric Pen Drive System Reference Guide BURRING SPEED ATTACHMENTS continued Insert the burr as far as possible turning it slightly to align the keyway The burr is fully inserted when the S M or L mark on the burr shank is no longer visible Turn the release ring of the attachment to the LOCK position and pull lightly on the instrument to confirm that it is secure Correct and incorrect insertion of the burr
9. t pull on the cable as this may damage the Drive Unit or plug Lock Drive Unit OFF 4 DePuy Synthes Power Tools Electric Pen Drive System Reference Guide DRIVE UNIT SETUP continued e To attach the Hand Switch to the Drive Unit align the arrows on the sides of the Hand Switch with the positioning arrows on the Drive Unit Press down on the Hand Switch until it clicks into place on the Drive Unit E SYNTHES i Electric Pen Drive e The Drive Unit can now be operated by using the Hand Switch The blue switch on the Hand Switch can also be used to lock the Drive Unit Locking switch Electric Pen Drive System Reference Guide DePuy Synthes Power Tools 5 DRIVE UNIT OPERATION The mode switch located on the base of the Drive Unit is used to lock or change rotational direction of the Drive Unit The switch is also used during the insertion and removal of the Drive Unit cable Always slide the lock before turning the mode switch For insertion or removal of the cable Drive Unit will not function in this position 9 Locked position prevents accidental operation of the Drive Unit FWD Clockwise rotation REV Counterclockwise rotation ie as Forward clockwise Reverse counterclockwise 6 DePuy Synthes Power Tools Electric Pen Drive System Reference Guide ATTACHMENT INSERTION Important To prevent injuries the mod
10. t the instrument turning it slightly to align the keyway Release the collar of the attachment and pull lightly on the instrument to confirm that it is secure 12 DePuy Synthes Power Tools Electric Pen Drive System Reference Guide K WIRE ATTACHMENT Inserting a K wire Instrument 05 001 037 K Wire Attachment Press the tensioning lever and insert a Kirschner wire into the attachment The tensioning lever can be rotated 300 for surgeon preference Release the tensioning lever to grip the wire The wire can now be inserted into the bone Repositioning or removing a K wire To reposition the wire in the attachment press the tensioning lever and pull back the unit along the Kirschner wire Release the tensioning lever once the wire is repositioned Electric Pen Drive System Reference Guide DePuy Synthes Power Tools 13 SAGITTAL SAW ATTACHMENTS Inserting a saw blade in Sagittal Saw Attachment Instruments 05 001 039 Sagittal Saw Attachment 05 001 183 Sagittal Saw Attachment in line 05 001 182 Sagittal Saw Attachment 90 05 001 074 Handhold for Tool Change Press the clamping button on the attachment Insert a sagittal saw blade into the saw blade coupling and move it into the desired position variable in 45 increments Release the clamping button Pull lightly on the saw blade to confirm that it is secure
11. warranties of merchantability or fitness are hereby disclaimed WARNING In the USA this product has labeling limitations See package insert for complete information CAUTION USA Law restricts these devices to sale by or on the order of a physician To order in the US call DePuy Synthes Power Tools Customer Service 800 327 6887 Not all products are currently available in all markets Some devices listed in this Reference Guide may not have been licensed in accordance with Canadian law and may not be for sale in Canada Please contact your sales consultant for items approved for sale in Canada 0 DePuySynthes 22 icf POWER TOOLS US Legal Manufacturer Canadian Legal Manufacturer DePuy Synthes Products LLC Synthes Canada Ltd 1302 Wrights Lane East 2566 Meadowpine Boulevard West Chester PA 19380 Mississauga Ontario L5N 6P9 USA Telephone 905 567 0440 Tel 610 719 5000 To order 800 668 1119 To Order 800 327 6887 Fax 905 567 3185 Fax 800 327 6661 Email infoPowerTools DPYUS jnj com www depuysynthes com DePuy Synthes Power Tools a division of DOI 2014 All rights reserved DSUS PWT 0814 0057 9 14
Download Pdf Manuals
Related Search