User Manual
Contents
1. can turn the white status indicator light on or off by selecting White Status Light from the Room Settings menu The SUB indicator will reflect the same setting as the player it is paired with For a SUB this may indicate the SUB is not yet paired with a player Applicable for player configured as a PLAYBAR surround speaker or for a SUB paired with a PLAYBAR If the orange light is on AND the player s volume level automatically reduces this indicates the player is in warning mode e Press the Pause button to stop the audio e Check the vent slot for adequate cooling Check the room temperature to make sure it s less than 104 F 40 C e Ifthe player is in direct sunlight provide shade Allow the player to cool for several minutes and then press Play to restart the audio e If the problem does not resolve please contact Customer Support Sonos PLAY 1 Indicator Lights Rapidly flashing orange Flashing orange Slowly flashing orange and white Player State Playback Next Track failed During SonosNet setup this occurs after a button press while the product is searching for a household to join Fault mode Sonos Product CONNECT CONNECT AMP PLAY 1 PLAY 3 PLAY 5 PLAYBAR BRIDGE BOOST CONNECT SUB CONNECT AMP DOCK PLAY 1 PLAY 3 PLAY 5 PLAYBAR CONNECT CONNECT AMP PLAY 1 PLAY 3 PLAY 5 PLAYBAR SUB Important Safety Information 1 Read these instructions SN OW PF YN Heed a2. e Check to ensure there are no obstacles to impede wireless operation e Check your network connections The Sonos player may need to be reset Disconnect the power cord for 5 seconds and then reconnect Wait for the Sonos player to restart Not all rooms are visible or Sonos app doesn t work in some rooms or music stops when use my 2 4 GHz phone You are probably experiencing wireless interference You can change the wireless channel your Sonos system is operating on by following the steps below e Using a handheld Sonos controller From the Settings menu touch Advanced Settings gt Wireless Channel Choose another wireless channel from the list Using the Sonos Controller App for PC Select Settings gt Advanced from the Manage menu On the General tab select another wireless channel from the list Using the Sonos Controller App for Mac Select Preferences gt Advanced from the Sonos menu On the General tab select another wireless channel from the list It may take several seconds for the switch to take effect If you have music playing a short music dropout may occur during the wireless channel change have a new router If you purchase a new router or change your ISP Internet service provider you will need to restart all your Sonos products after the router is installed Note Ifthe ISP technician connects a Sonos product to the new router you only need to restart your wireless Sonos products 1 Disc
3. further from the television e The PLAY 1 is humidity resistant so you can use it in the bathroom however it is not water resistant so don t position it near water or leave it outside during a rain storm Sonos PLAY 1 5 Wall Mounting The Sonos PLAY 1 has a standard 1 4 20 threaded mounting socket If desired you can easily wall mount your PLAY 1 using a suitable mounting bracket not included Simply choose a location that s close to an electrical outlet power cord length is 2m taking care to avoid heat steam dripping water or hidden wiring and follow the instructions included with the wall mount kit You can hang it right side up control buttons on top or upside down control buttons on the bottom Note Be sure the wall mount bracket you purchase will support at least 8lbs 3 6 kgs and has a 1 4 20 threaded post Adding to an Existing Sonos System Once you ve got your Sonos music system set up you can easily add more Sonos products any time up to 32 1 Select a location for your PLAY 1 see Selecting a Location above for optimal placement guidelines 2 Attach the power cord to the PLAY 1 and apply power Be sure to push the power cord firmly into the bottom of the PLAY 1 until it is flush with the bottom of the unit Note If you want to make a wired connection connect a standard Ethernet cable from your router or another Sonos product or a live network wall plate if you have built in wiring to an Ethernet po
4. of the following options e To add a new music folder select Manage Music Library gt Music Library Setup gt Add New Share To remove a music folders select Manage Music Library gt Music Library Setup Touch the share you wish to remove and then select Remove Sonos PLAY 1 11 The Sonos system indexes your local music so you can view your music collection by categories such as artists albums composers genres or tracks If you add new music simply update your music index to add this music to your Sonos music library e To update your music library select Manage Music Library gt Update Music Index Now If you d like your music library to update automatically each day select Schedule Music Index Updates and then select an update time Wireless Tunes playback You can select and play music and podcasts stored on any iPad iPhone or iPod touch that s on the same network as your Sonos products Playback is perfectly synchronized in any or every room of your home Simply choose This iPad This iPhone or This iPod touch from the Sonos app on your OS device to make audio selections and then you can use any Sonos controller to control playback Wireless playback requires Sonos Controller App for iPhone or iPad version 3 8 3 or higher and devices running iOS software version 6 0 or later Wireless playback from Android devices You can select and play music stored on any Android device that s on the same network as your So
5. radio equipment must ensure that the product is located such that it does not emit RF field in excess of Health Canada limits for the general population consult Safety Code 6 obtainable from Health Canada s Web site www hc sc gc ca rpb As mentioned before the installer cannot control the antenna orientation However they could place the complete product in a way that causes the problem mentioned above The device for operation in the band 5150 5250 MHz is only for indoor use to reduce the potential for harmful interference to co channel mobile satellite systems Be advised that high power radars are allocated as primary users i e priority users of the bands 5250 5350 MHz and 5650 5850 MHz and that these radars could cause interference and or damage to LE LAN devices Canada Cet appareil num rique de classe B est conforme aux normes NMB 003 et CNR 210 en vigueur au Canada Son fonctionnement est soumis aux deux conditions suivantes 1 Cet appareil ne doit pas cr er d interf rences nuisibles 2 Cet appareil doit tol rer toutes les interf rences re ues y compris les interf rences pouvant entra ner un fonctionnement ind sirable L installateur du pr sent mat riel radio doit veiller ce que le produit soit plac ou orient de mani re a n mettre aucun champ radio lectrique sup rieur aux limites fix es pour le grand public par le minist re f d ral Sant Canada consultez le Code de s curit 6 sur le site Web de S
6. select Preferences gt Advanced from the Sonos menu On the General tab select Wireless Setup 3 Enter the new wireless network password when prompted 4 Once the password is accepted you can unplug the player from your router and move it back to its original location 16 Player Status Indicators Important Note air flow and cause it to overheat Indicator Lights Solid white Flashing white Flashing green Solid green Slowly flashing green Solid orange Player State Powered up and associated with a Sonos system Powering up Powered up not yet associated with a Sonos system Volume set to zero or muted Surround audio is off or SUB audio is off During wireless setup this occurs while the Sonos open access point is temporarily active If you are not setting up your Sonos system this may indicate warning mode Sonos Product BRIDGE BOOST CONNECT SUB CONNECT AMP DOCK PLAY 1 PLAY 3 PLAY 5 PLAYBAR BRIDGE BOOST CONNECT SUB CONNECT AMP DOCK PLAY 1 PLAY 3 PLAY 5 PLAYBAR BRIDGE BOOST CONNECT SUB CONNECT AMP DOCK PLAY 1 PLAY 3 PLAY 5 PLAYBAR CONNECT CONNECT AMP PLAY 1 PLAY 3 PLAY 5 PLAYBAR PLAY 1 PLAY 3 SUB CONNECT SUB CONNECT AMP PLAY 1 PLAY 3 PLAY 5 PLAYBAR Product Guide Do not place any items on top of your Sonos player This may impede the Additional Information If desired when the product is in normal operation you
7. site at http faq sonos com norouter for more information 3 Check the wiring Check the indicator lights on both the router and the Sonos product The link status lights should be lit solid and the activity lights on the router should be blinking e If the link lights are not lit try connecting to a different port on your router If the link lights still do not light try connecting a different Ethernet cable Sonos player is not operating properly e Ifthe status indicator is not lit and no sound is produced when the unit is plugged in check to ensure the power cord is properly seated e If the status indicator is solid white make sure the volume is set to a suitable level make sure MUTE is not on if CONNECT AMP make sure external speakers are connected securely e Ifthe player has suddenly stopped playing music and the status indicator is flashing orange and white pause or unplug the player for a few minutes to allow it to cool Check to make sure the vents are not blocked See Player Status Indicators on page 16 14 Product Guide Check the link activity lights on both the router and the Sonos product that is wired to your router The link lights should be lit solid and the activity lights should be blinking If the link lights are not lit try connecting to a different port on your router If the link lights still do not light try using a different Ethernet cable Move your Sonos controller closer to a player
8. LAY 1 or PLAY 3 speakers with your PLAYBAR to create a 3 1 or 5 1 home theater setup Your home network is 5GHz only not switchable to 2 4GHz e For best results you should connect the computer or NAS drive that contains your personal music library collection to your home network router using an Ethernet cable System requirements e Windows XP SP3 and higher while Windows XP SP3 and higher are compatible with version 5 1 standard wireless setup is only supported on Windows 7 and higher e Macintosh OS X 10 6 8 and higher while Macintosh OS X 10 6 8 and higher are compatible with version 5 1 standard wireless setup is only supported on Mac iOS 10 7 and higher Compatible with iPhone iPod touch and iPad devices running iOS 6 0 or later certain features require higher versions of DS Sonos PLAY 1 3 e Android 2 1 and higher certain features require higher versions of Android while Android 2 1 and higher are compatible with version 5 1 standard wireless setup is only supported on Android 2 3 or 4 0 and higher Note For the latest system requirements including supported operating system versions please visit our Web site at http faq sonos com specs Sonos Controllers You can use any Sonos controller with the Sonos PLAY 1 including Sonos Controller for Android Touch the Play Store or Market button on your Android phone or tablet to download the free Sonos application from Google Play Son
9. Net Extender General Power Supply Top Panel Buttons Top Panel LED Dimensions H x W x D Threaded mount Weight Operating Temperature Storage Temperature Humidity Resistant Product Finish Description Works on your home WiFi network with any 802 11b g 2 4GHz broadcast capable router Also works on SonosNet a secure AES encrypted peer to peer wireless mesh network dedicated exclusively for your Sonos system to reduce WiFi interference One 10 100Mbps Ethernet port Functions to extend and enhance the power of SonosNet 2 0 100 240 VAC 50 60 Hz auto switchable Volume and Play Pause Press Play Pause button once to start or stop the music twice to skip to the next track Indicates PLAY 1 status 6 36 x 4 69 x 4 69 in 161 45 x 119 7 X 119 7 mm Standard 1 4 20 threaded mounting socket 4 08 lb 1 85 kg 32 to 104 F 0 to 40 C 4 to 158 F 20 to 70 C Designed to withstand high humidity such as in a bathroom with a running shower The PLAY 1 is not waterproof or water resistant White with light metallic grille black with graphite grille Specifications subject to change without notice 20 Product Guide Regulation Information USA This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential install
10. Sonos PLAY 1 Product Guide THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE No part of this publication may be reproduced or transmitted in any form or by any means electronic or mechanical including but not limited to photocopying recording information retrieval systems or computer network without the written permission of Sonos Inc Sonos and all other Sonos product names and slogans are trademarks or registered trademarks of Sonos Inc Sonos Reg U S Pat 8 Tm Off Sonos products may be protected by one or more patents Our patent to product information can be found here sonos com legal patents iPhone iPod iPad and Tunes are trademarks of Apple Inc registered in the U S and other countries Windows is a registered trademark of Microsoft Corporation in the United States and other countries Android is a trademark of Google Inc MPEG Layer 3 audio decoding technology licensed from Fraunhofer IIS and Thomson Sonos uses MSNTP software which was developed by N M Maclaren at the University of Cambridge Copyright N M Maclaren 1996 1997 2000 Copyright University of Cambridge 1996 1997 2000 All other products and services mentioned may be trademarks or service marks of their respective owners November 2014 2004 2014 by Sonos Inc All rights reserved Sonos PLAY 18 The PLAY 1 is the newest most compact Sonos wireless speaker that lets you use any Sonos controll
11. ant Canada a l adresse www hc sc gc ca rpb Comme indiqu auparavant l installateur ne peut pas contr ler l orientation de l antenne Il peut n anmoins placer le produit tout entier de mani re a provoquer le probl me d crit ci dessus Sonos PLAY 1 21 Les dispositifs fonctionnant dans la bande 5150 5250 MHz sont r serv s uniquement pour une utilisation a l int rieur afin de r duire les risques de brouillage pr judiciable aux syst mes de satellites mobiles utilisant les m mes canaux Les utilisateurs de radars de haute puissance sont d sign s utilisateurs principaux c a d qu ils ont la priorit pour les bandes 5250 5350 MHz et 5650 5850 MHz et que ces radars pourraient causer du brouillage et ou des dommages aux dispositifs LAN EL Europe Sonos declares that this product herewith complies with the requirements of the EMC Directive 2004 108 EC Low Voltage Directive 2006 95 EC Eco Design Directive 2005 32 EC RoHS Directive 2011 65 EU and the R amp TTE Directive 1999 5 EC when installed and used in accordance with the manufacturer s instructions A copy of the full Declaration of Conformance may be obtained at www sonos com support policies CE Attention In France operation is limited to indoor use within the band 5150 5350 MHz SonosNet is the propriety wireless mesh network architecture designed to provide robust transmission of high fidelity streaming digital music All Sonos players within the SonosNet mesh network ac
12. ation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures All Sonos devices have in products antennas Users cannot reorient or relocate the receiving antenna without modifying the product Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Caution Modifications not expressly approved by the manufacturer may void the user s authority to operate the equipment under FCC rules The device for operation in the band 5150 5250 MHz is only for indoor use to reduce the potential for harmful interference to co channel mobile satellite systems Canada This Class B digital apparatus complies with Canadian ICES 003 and RSS 210 Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device The installer of this
13. compressed WAV and AIFF files Native support for 44 1kHz sample rates Additional support for 48kHz 32kHz 24kHz 22kHz 16kHz 11kHz and 8kHz sample rates Note Apple Fairplay AAC Enhanced and WMA Lossless formats not currently supported Previously purchased Apple Fairplay DRM protected songs may be upgraded See Apple for details Sonos works seamlessly with 7 Digital 8 Tracks Amazon Cloud Player AUPEO Batanga Beats Music blinkbox music Calm Radio Concert Vault Dar fm Record Radio Daytrotter Deezer FM DoubanFM 25 Y Duomi Google Play Music Grooveshark Hearts of Space hotelradio fm iHeartRadio JB Hi Fi NOW JUKE Last fm Live365 MLB com Gameday Audio Murfie Napster by Rhapsody Netease Pandora Qobuz QQ 4k QQ Music radionomy rara com Rdio Rhapsody RUSC Shuffler fm simfy SiriusXM Internet Radio Slacker Songl Songza SoundCloud Spotify Stitcher SmartRadio TDC Play Musik The Hype Machine Tuneln WiMP Xiami YouMusic Zdigital and downloads from any service offering DRM free tracks service availability varies by region Windows XP SP3 and higher Macintosh OS X 10 6 8 and higher NAS network attached storage devices supporting CIFS Streaming MP3 WMA JPEG PNG BMP GIF iTunes WinAmp Windows Media Player and MusicMatch m3u pls wpl Sonos PLAY 1 Feature Networking Wireless Connectivity Ethernet Port Sonos
14. er to control and enjoy all the music you want all over your home see Sonos Controllers on page 3 for more information Two custom designed drivers 3 5 in 9 cm mid woofer and tweeter each with a dedicated amplifier Play Pause functionality remembers the last thing you were listening to You can even skip to the next track with a double press Pair two PLAY 1s for amazing stereo sound or use two PLAY 1s as rear speakers for your Sonos PLAYBAR home theater system Works seamlessly with the complete range of Sonos products New to Sonos It takes just a few steps to get your Sonos system up and running simply follow the setup instructions packaged with your PLAY 1 Once you ve got it set up you can add additional Sonos products any time Adding to an existing Sonos system Sonos can be easily expanded room by room If you are adding a PLAY 1 to an existing Sonos system you can turn directly to Adding to an Existing Sonos System on page 5 2 Product Guide Your Home Network To access Internet music services Internet radio and any digital music stored on your computer or Network Attached Storage NAS device your home network must meet the following requirements Home network requirements Note Your network must have a high speed Internet connection as the Sonos system is designed to provide you with free online software updates Your Sonos system must be registered to receive these updates so be sure to
15. exposed to rain or moisture does not operate normally or has been dropped 12 The AC Mains plug should be readily available to disconnect the equipment Product Guide 13 Warning To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture 14 Do not expose apparatus to dripping or splashing and do not place objects filled with liquids such as vases on the apparatus 15 If wall mounting your Sonos products make sure to use proper third party wall mounting hardware and follow all their instructions Specifications Feature Audio Amplifier Tweeter Mid Woofer Stereo Pair setting 5 1 Home Theater Music Audio Formats Supported Music Services Supported Operating Systems for stored files Internet Radio Supported Album Art Supported Playlists Supported Description Two Class D digital amplifiers One tweeter creates a crisp and accurate high frequency response One mid woofer ensures the faithful reproduction of mid range frequencies crucial for accurate playback of vocals and instruments as well as delivery of deep rich bass Turns two PLAY 1s into separate left and right channel speakers Add two PLAY 1 speakers to PLAYBAR and SUB for a true surround sound experience Support for compressed MP3 iTunes Plus WMA including purchased Windows Media downloads AAC MPEG4 AAC Ogg Vorbis Audible format 4 Apple Lossless Flac lossless music files as well as un
16. he PLAY 1 is used in a stereo pair 1 Using a handheld controller select Settings gt Room Settings 2 Touch to select a room 3 Select Music Equalization and then drag your finger across the sliders to make adjustments 12 Product Guide 4 To change the Loudness setting touch On or Off The loudness setting boosts certain frequencies including bass to improve the sound at low volume Basic Troubleshooting Warning Do not open Sonos products as there is a risk of electric shock Under no circumstances should Sonos products be repaired by anyone other than an authorized Sonos repair center as this will invalidate the warranty Please contact Sonos Customer Support for more information If a problem occurs you can try the troubleshooting suggestions listed below If one of these doesn t remedy the problem or you are not sure how to proceed please contact the Sonos Customer Support team and we ll be happy to help Sonos product s not detected during setup Check to make sure the power cord is properly seated A network issue may be preventing the product from connecting to your Sonos system If this is a wireless Sonos component try moving the Sonos products closer together or use an Ethernet cable to hard wire the product to your router temporarily to see if the problem is related to wireless interference If you encounter this message while a Sonos product is connected to your router you can try the steps below t
17. ll warnings Keep these instructions Follow all instructions Do not use this apparatus near water where they exit from the apparatus 9 Only use attachments accessories specified by the manufacturer Additional Information Indicates either playback or next track was not possible If the lights are flashing orange and white AND the volume automatically mutes this indicates the player is experiencing a fault condition Press the Pause button to stop the audio Check the room temperature to make sure it s less than 104 F 40 C If the player is in direct sunlight provide shade Allow the product to cool for several minutes and then press Play to restart the audio If the problem does not resolve please contact Customer Support Clean only with dry soft cloth Household cleaners or solvents can damage the finish on your Sonos products Do not install near any heat sources such as radiators heat registers stoves or other apparatus that produce heat Protect the power cable from being walked on or pinched particularly at plugs convenience receptacles and the point 10 Unplug this apparatus during lightning storms or when unused for long periods of time 11 Refer all servicing to Sonos qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cable or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been
18. nces Mac Select Room Settings if it is not already highlighted on the left From the Basic tab select Add Surround Speakers Follow the prompts to add first a left and then a right surround speaker Surround settings The default audio settings are determined by the calibration process If you wish to make a change you can follow the steps below Using a handheld Sonos controller 1 2 From the Settings menu select Room Settings Select the room the Sonos PLAYBAR and surround speakers are located in It appears as Room LS RS on the Room Settings menu Select Advanced Audio gt Surround Settings Choose one of the following e Surrounds Choose On or Off to turn the sound from the surround speakers on and off Surround Level Adjustment Drag your finger across the slider to increase or decrease the volume of the surround speakers Sonos PLAY 1 9 e Music Playback Choose Ambient default subtle ambient sound or Full enables louder full range sound This setting applies only to music playback not TV audio Using the Sonos Controller for Mac or PC 1 nDe WN 6 Select Manage gt Settings PC or Sonos gt Preferences Mac Select Room Settings if it is not already highlighted on the left Choose the room the Sonos PLAYBAR and surround speakers are located in from the Room Settings for drop down Select the Surrounds tab Choose one of the following e Surrounds Check to turn the sound from
19. nos products Playback is perfectly synchronized in any or every room of your home Simply choose This Mobile Device from the Sonos app on your Android smartphone or tablet to make audio selections and then you can use any Sonos controller to control playback Wireless music playback is compatible with Sonos software update 4 1 1 and higher and any device running Android 2 1 and higher Wireless playback of podcasts is supported on Android 2 2 and higher Google Play Music Android devices You can play music to your Sonos system directly from the Google Play Music app on any Android device This feature is available for both Standard and All Access Google Play Music customers To play music directly from the Google Play Music app to your Sonos system you must have both the Google Play Music app and the Sonos Controller App installed on your mobile device Sonos playback from Google Play Music is compatible with Sonos software update 4 3 and higher and with any device running Android 2 3 and higher Simply open the Google Play Music app and connect to a Sonos room or room group to start the music When you are finished disconnect the Sonos room from the app Equalization Settings The Sonos PLAY 1 ships with the equalization settings preset to provide the optimal playback experience If desired you can change the sound settings bass treble balance or loudness to suit your personal preferences Note Balance is only adjustable when t
20. o resolve this issue If you are still experiencing problems please contact Sonos Customer Support 1 Check the firewall Firewall software installed on the computer may be blocking the ports that Sonos uses to operate First disable all your firewalls and try to connect again If this resolves the problem you should configure your firewall to work with the Sonos Controller for Mac or PC Please go to our Web site at http faq sonos com firewall for additional information If this does not resolve the problem you can try step 2 below Sonos PLAY 1 13 2 Check the router You can bypass your router s switch to determine whether there are any router configuration issues by connecting a Sonos product as shown below in this BOOST configuration example note that the BOOST and the computer still have Internet access Sonos BOOST wun Cable DSL Modem 2 Router Computer Be sure that your cable DSL modem is connected to the router s WAN Internet port Temporarily remove any other components that are wired to your network Connect an Ethernet cable from the computer directly to the back of the BOOST and then connect another Ethernet cable from that Sonos product directly to one of the LAN ports on your router e When you make a change to your network configuration you may need to power cycle the Sonos product by unplugging the power cord and then plugging it back in If you are not using a router you can visit our Web
21. once to start or stop streaming audio e Press twice to skip to the next track if applicable to the selected music source Indicates the current status of the PLAY 1 When the PLAY 1 is in normal operation you can turn the white status indicator light on and off For a complete list of status indications please go to http faq sonos com led Press these buttons to adjust the volume up and down The PLAY 1 has an integrated mounting hole on the back of the unit so it can be wall mounted if desired mounting bracket not included See Wall Mounting on page 5 for more information You can use an Ethernet cable supplied to connect the PLAY 1 to a router computer or additional network device such as a network attached storage NAS device Use only the supplied power cord to connect to a power outlet using a third party power cord will void your warranty Insert the power cord firmly into the PLAY 1 until it is flush with the bottom of the unit You can locate a Sonos PLAY 1 just about anywhere For maximum enjoyment we have a few guidelines e The PLAY 1 is designed to work well even when placed next to a wall or other surface For optimum performance maintaining more than 1 inch 2 5 cm clearance around the back of the unit is recommended e Care should be taken if placing the PLAY 1 close to an older CRT cathode ray tube television If you notice any discoloration or distortion of your picture quality simply move the PLAY 1
22. onnect the power cord from all of your Sonos products for at least 5 seconds 2 Reconnect them one at a time starting with the Sonos product that is connected to your router Wait for your Sonos products to restart The status indicator light will change to solid white on each product when the restart is complete If your Sonos setup is completely wireless you will also need to change your wireless network password Follow the steps below 1 Temporarily connect one of your Sonos players to the new router with an Ethernet cable 2 From the Sonos music menu on your controller select Settings 3 Select Advanced Settings gt Wireless Setup Sonos will detect your network Sonos PLAY 1 15 4 Enter the password for your wireless network 5 Once the password is accepted unplug the player from your router and move it back to its original location want to change my wireless network password If your Sonos system is set up wirelessly and you change your wireless network password you will also need to change it on your Sonos system 1 Temporarily connect one of your Sonos players to your router with an Ethernet cable 2 Choose one of the following options e Using a handheld Sonos controller select Settings gt Advanced Settings gt Wireless Setup Using the Sonos Controller App for PC select Settings gt Advanced from the Manage menu On the General tab select Wireless Setup Using the Sonos Controller App for Mac
23. os Controller for iPhone or the Sonos Controller for iPad Touch the App Store button on your iPhone iPod touch or iPad to download the free Sonos application or you can download the application from Tunes If you download from iTunes you will need to sync before you see the Sonos logo display on your device Sonos Controller for Mac or PC Download from our Web site at www sonos com support downloads e Sonos CONTROL Sonos is always working on new ways to help you control the music any way you want For the latest list of Sonos controllers please visit our Web site at www sonos com products PLAY 1 Top Back Play Pause Status Indicator Volume Up Volume Down Threaded Mounting Hole Ethernet Port AC Power Mains Input On Off Play Pause button Status indicator Volume up Volume down Threaded mounting hole 1 4 inch 20 thread Ethernet switch connector AC power mains input 100 240 VAC 50 60 Hz Selecting a Location Product Guide Your Sonos system is designed to be always on the system uses minimal electricity whenever it is not playing music To quickly stop streaming audio in all rooms select Pause All from the Rooms menu To stop streaming audio in one room press the Play Pause button on the player Toggles between playing and pausing the audio in this room defaults to restarting the same music source when pressed unless a different source is selected e Press
24. ouch Add Music Services from the Sonos music menu on your handheld controller 2 Select the Sonos compatible music service you would like to add 3 Select Add Account and then follow the on screen prompts Your login and password will be verified with the music service As soon as your credentials have been verified the music service displays on the Sonos music menu Free music service trials are available in some countries Please check the individual music service s Web site for more information If there is a music service trial visible on the Music Services menu simply touch it to select Touch Add Account gt I m new to music service and then follow the prompts to activate the music trial After the trial period is up you will need to subscribe to the music service to keep the music playing Local music library The Sonos system can play music from any computer or network attached storage NAS device on your home network where you have shared music folders During the setup process you are guided through the process of accessing your local music library such as your Tunes library Over time you may wish to add or remove folders from this list Note We recommend using the Sonos Controller for Mac or PC to add shared folders For more information please visit our website at http faq sonos com manage To make changes to your local music library select the Settings menu from a handheld Sonos controller and then choose one
25. register during the setup process We do not share your e mail address with other companies High speed DSL Cable modem or fiber to the home broadband connection for proper playback of Internet based music services If your Internet service provider only offers Satellite Internet access you may experience playback issues due to fluctuating download rates e If your modem is not a modem router combination and you want to take advantage of Sonos automatic online updates or stream music from an Internet based music service you must install a router in your home network If you do not have a router purchase and install one before proceeding If you are going to use the Sonos Controller App on an Android or iOS device or you are setting up Sonos wirelessly you will need a wireless router Please visit our Web site at http faq sonos com apps for more information Note Sonos communicates over a 2 4GHz home network supporting 802 11 b g wireless technology 5GHz networks are not supported in a completely wireless Sonos setup Connect a Sonos BRIDGE BOOST or player to your router if e You have a larger home where the WiFi performance isn t reliable and you want to strengthen the wireless performance of your Sonos system e Your WiFi network is already in high demand with streaming video and web surfing and you want to create a separate wireless network exclusively for your Sonos speakers e You want to pair a SUB and or a pair of P
26. rs If these were newly purchased PLAY 1s they will appear as Unused in the Rooms pane If these PLAY 1s existed in your household previously they revert back to their previous state 10 Product Guide Playing Music You can use any Sonos controller to select music simply touch EJOLJEEN to select from the Sonos music menu on a handheld controller or click to select from the MUSIC pane within the Sonos Controller for Mac or PC Radio Sonos includes a radio guide that provides immediate access to thousands of free Internet radio stations and broadcast programs You can easily find radio stations from all over the world music news and variety programming including archived shows and podcasts To select a radio station simply select Radio and choose a station Music services A music service is an online music store or online service that sells audio on a per song per audiobook or subscription basis Sonos is compatible with several music services you can visit our Web site at www sonos com howitworks music partners for the latest list Some music services may not be available in your country Please check the individual music service s Web site for more information If you are currently subscribed to a music service that s compatible with Sonos simply add your music service user name and password information to Sonos as needed and you ll have instant access to the music service from your Sonos system 1 To add a music service t
27. rt on the back of the PLAY 1 3 Choose one of the following options e Using a handheld Sonos controller Select Add a Player or SUB from the Settings menu and follow the on screen prompts to add this product to your Sonos system Using the Sonos Controller for Mac or PC Select Add a Player or SUB from the Manage menu and follow the prompts to add this product to your Sonos system Thick walls 2 4 GHz cordless telephones or the presence of other wireless devices can interfere with or block the wireless network signals from your Sonos system If you experience difficulty after positioning a Sonos product try one or more of the following resolutions relocate the Sonos product change the wireless channel your music system is operating on connect a Sonos product to your router if your setup is currently wireless Creating a Stereo Pair The Stereo Pair setting allows you to group two PLAY 1s PLAY 3s or PLAY 5 s in the same room to create a wider stereo experience In this configuration one unit serves as the left channel and the other serves as the right channel You cannot create a mixed stereo pair the Sonos components in the stereo pair must be the same 6 Product Guide Optimum placement information When creating a stereo pair it is best to place the two Sonos components 8 to 10 feet away from each other e Your favorite listening position should be 8 to 12 feet from the paired Sonos components Less distance will increa
28. se bass more distance will improve stereo imaging Note The Stereo Pair setting is for use with PLAY 1 PLAY 3 and PLAY 5 units only You cannot create a mixed stereo pair both Sonos components in the stereo pair must be the same Using a handheld Sonos controller 1 Select Settings gt Room Settings 2 Select a PLAY 1 to pair 3 Select Create Stereo Pair and touch Next 4 Select the other PLAY 1 you wish to pair 5 When prompted press the Volume Up button on the PLAY 1 you wish to use as the left channel The units automatically connect to form a stereo pair To separate a stereo pair 1 Select Settings gt Room Settings 2 Select the stereo pair you wish to separate the stereo pair appears with L R in the Room name 3 Select Separate Stereo Pair and touch Separate to confirm Sonos PLAY 1 7 Using the Sonos Controller for Mac or PC 1 2 3 Choose one of the following e Using the Sonos Controller for PC Select Settings from the Manage menu e Using the Sonos Controller for Mac Select Preferences gt Room Settings from the Sonos menu Select a PLAY 1 you want to pair from the Room Settings for drop down list Click Create Stereo Pair and then follow the prompts to set up the stereo pair To separate a stereo pair 1 Choose one of the following e Using the Sonos Controller for PC Select Settings from the Manage menu Using the Sonos Controller for Mac Select Preferences g
29. t Room Settings from the Sonos menu Select the Sonos stereo pair you wish to separate from the Room Settings for drop down the stereo pair will appear with L R in the room name On the Basic tab click Separate Stereo Pair Click Separate Surround Speakers Adding surround speakers You can easily pair two PLAY 1 or PLAY 3 products with a PLAYBAR to function as left and right surround channels in your Sonos surround sound experience You can either configure surround speakers during the setup process or follow the steps below to add them Make sure the Sonos players are the same you cannot combine a PLAY 1 and a PLAY 3 to function as surround speakers e Pairing surround speakers with your PLAYBAR requires a wired connection so make sure you have a BRIDGE BOOST or Sonos player wired to your router with an Ethernet cable before proceeding e Be sure to follow the instructions below to set up your surround speakers Do not create a room group or stereo pair as these will not achieve the left and right surround channel functionality Product Guide Using a handheld Sonos controller 1 2 3 4 From the Settings menu select Room Settings Select the room the PLAYBAR is located in Select Add Surround Speakers Follow the prompts to add first a left and then a right surround speaker Using the Sonos Controller App for Mac or PC 1 2 3 4 Select Manage gt Settings PC or Sonos gt Prefere
30. t as both a client and access point simultaneously Each Sonos player expands the range of SonosNet mesh network because while each device must be within range of at least one other Sonos player they do not need to be within range of a central access point In addition to extending the range between Sonos products SonosNet can extend the range of other data networking devices within the home such as Android devices directly connected to SonosNet Due to the high network availability requirements of the SonosNet mesh network Sonos players do not have a standby or off mode other than removing the power cord from the AC mains RF Exposure Requirements To comply with FCC and Industry Canada exposure essential requirements a minimum separation distance of 20cm 8 inches is required between the equipment and the body of the user or nearby persons Recycling Information This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead please deliver it to the applicable collection point for the recycling of electrical and electronic equipment By recycling this product correctly you will help conserve natural resources and prevent potential negative environmental consequences For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product
31. the surround speakers on uncheck to turn it off Surround Level Adjustment Click and drag the slider to increase or decrease the volume of the surround speakers e Music Playback Choose Ambient default subtle ambient sound or Full enables louder full range sound This setting applies only to music playback not TV audio Close the Settings window when changes are complete Removing surround speakers Using a handheld Sonos controller 1 2 From the Settings menu select Room Settings Select the room the surround speakers are associated with The room name appears as Room LS RS on the Room Settings menu Select Remove Surround Speakers Select Next to drop the surround sound speakers from your surround system If these were newly purchased PLAY 1s or PLAY 3s they will appear as Unused on the Rooms menu If these players existed in your household previously they revert back to their previous state You can now move them to another room for individual use If you want to add them back as surround speakers see Surround Speakers on page 7 for help Using the Sonos Controller for Mac or PC 1 2 3 Select Manage gt Settings PC or Sonos gt Preferences Mac Select Room Settings if it is not already highlighted on the left Choose the room the Sonos PLAYBAR is located in from the Room Settings for drop down list The room name appears as Room LS RS From the Basic tab click Remove Surround Speake
Download Pdf Manuals
Related Search