Home

ADMS-VX8 Programmer Help File.

1. Set the options as you need them to get the performance you want from your radio The settings shown for your radio will correspond to your radio s features O 2012 RT Systems Inc z VX8 and VX8D Programmer Help Once you have the options like you want it save this file Yes this is saved separately from the frequencies in the memory channels To save the file select File Save from the menu on the Settings page Enter a name when the window opens You will not have to set these options again when you start a new file of memory channels Once the file is saved select File Exit to return to the main screen of the programmer Sending the file s to the radio programming the radio The new RT Systems Version 4 programmers have no comport setup Using the RT Systems USB cable you attach the cable attach the radio and get the programming done First Communications Get data from Although you really want to put the details of your file into your new radio so you can use it doing Get data from with this new radio gets the process started and may help prevent problems sending the file to the radio This process is REQUIRED if your radio has been modified to transmit outside the ham band e From the menu at the top of the main window select File New Opena new file to protect the file that you created e Connect the RT Systems USB cable to a port on your computer Wait until the New Hardware Found
2. Open the files From the menu at the top of the main screen select Window New Horizontal tab group The screen will separate into two parts taking the selected file to the new group To work with three as shown above simple select another file and repeat the process Note Once you divide the screen horizontally or vertically the other separation is not available Selections for vertical and horizontal groups will be enabled and disabled in the menu as necessary 2012 RT Systems Inc VX8 and VX8D Programmer Help 9 Menu Item Cross Reference The Programmer presents all the options for the radio in easy to use grid check box list and combo box formats Most radios these days have so many options that organizing them in the Programmer can be a challenging task The location in the Programmer is described as a path For example Settings Radio Menu Settings Common tab Antenna AM e Click on Settings at the top of the screen e Select Radio Menu Settings from the menu that opens e Select the Common tab e The option is named Antenna AM on the Common tab Set Mode Antenna AM Settings Radio Menu Settings Common tab Antenna AM Antenna FM Settings Radio Menu Settings Common tab Antenna FM Antenna ATT Settings Radio Menu Settings Common tab Attenuator Broadcast Marine Weather The option can be set separately for each of these bands APO Settings Radio Menu Sett
3. Copying details from one cell to change many rows at once e Column editing This editing allows you to change the data in the same column of several rows at once It works a little differently for columns with text including those into which you enter text and those that you select text from a list and check box fields Each of these scenarios is presented here in an example Text Cell Editing To change Tone Mode to Tone for several channels Select the Tone Mode field of the first of the channels to be changed Make the change by pulling the drop down and selecting Tone from the list 2012 RT Systems Inc Easy Editing in the Grid as 1928922929993 Mare More Mre Nene mre ire mre EEEEETEET EEHEEEEE SESSESESEESES 1419992399999 db 198172299399 1331311313515 131ITIPELESLIIIIGIisicidid3isi3iiii3i EREFEREEPEPEPEEP EERE REE EE SESSESSSSESES SSS SSS SSE SEE EEEE 99 Once the selection is made the focus will move to the next field Click back into the Tone Mode field that displays the correct value When you move back into the field you can copy the information if the field is highlighted with a ring around its border or if the text within is shaded indicating that itis selected Press Ctrl C select Edit Copy from the menu at the top of the screen or right click and select Copy from the menu that appears Just as with row copying in the first example
4. T DCS CTCSS encode tone squelch is activated for transmission and Digital Coded Squelch for reception With T DCS selected as the Tone Mode the values that appear in the CTCSS Tone and DCS Code columns are both used by the radio The CTCSS Tone selection is used for 2012 RT Systems Inc 98 VX8 and VX8D Programmer Help transmissions while the DCS Code selection is used for reception Be sure that you set both the CTCSS Tone and the DCS Code once this option is selected D Tone Digital Coded Squelch is activated for transmission and CTCSS decode for reception With D TSQL selected as the Tone Mode the values that appear in the CTCSS Tone and DCS Code columns are both used by the radio The CTCSS Tone selection is used for reception while the DCS Code selection is used for transmission Be sure that you set both the CTCSS Tone and the DCS Code once this option is selected CTCSS Tone This field is available when Tone Mode is set to Tone T Sql Rev CTCSS TDCS orD Tone Select one of 50 tone frequencies to be used in the Encode or Decode modes This value is set independently for each memory channel A value that appears in this field is ignored by the radio if one of the tone modes that uses CTCSS is not activated DCS Code This field becomes active when Tone Mode is set to DCS D Code T DCS or D Tone Select one of the 104 codes available for use when the radio is in DCS mode This value is set independently for eac
5. Programming Other Set Menu Items 155 pressed You remain in complete control of when the beacon is transmitted e Smart Enable automatic transmission in accordance with the interval determined in the Smart Beacon Settings for Type 1 2 or 3 Digi Path Set up to eight digipeaters for the APRS packet path The radio is preset to Wide1 1 and Wide1 1 Wide2 1 digipath to insure that your transmitted APRS Beacon is repeated by the new N paradigm digipeaters Yaesu recommends that you use this setting by default Six other options for settings are available for you to customize Smart Beacon Type Select Type 1 2 or 3 to use when Beacon TX is set to Smart This selection correlates to the Type 1 2 or 3 settings in the Smart Beacon Settings section Smart Beacon Setting Set the options for each of three Smart Beacon types The radio transmits the APRS beacon automatically when any parameter value exceeds the set point The default values are suggested as Type 1 for walking Type 2 for bicycling and Type 3 for travel ina vehicle Adjustments are suggested if these do not generate the desired rate of transmission during your given activity Note There is nothing really special about one of these as compared to another This menu item APRS GPS Menu Item 24 simply gives you three sets of the same parameters to set as you need for experimentation or for three different activities once you establish Suitable values for that
6. Copying an entire memory channel or group of channels Shown here are details for copying within a file The same actions apply to copy data to another tab of the file or to another programmer Open the file 2012 RT Systems Inc ss VX8 and VX8D Programmer Help gt sea S COAN TELILFLLLLLIE SSSESSERESESSESSESSSESESESSSOSESEOSSESESESESES T Tore tome Wore tee tne tena tone tee n tere None tee Nene tere Nene the tne Vere Vem te tune tes to too tone Vere tee tone tere Vem tae None Nene tore tone te tere Nene te te tne tone tne tone tome tone tee LILLLLFLLILRLLFLLLLLITLLLLLLTREE Select the data to be copied To select an entire row point your mouse at the number in the blue box at the left of the row Click and release the left mouse to select that row The entire row will be highlighted when it is selected To select multiple rows point your mouse at the number in the blue box at the left of the first row to be selected Click and hold the left mouse button as you drag the pointer over the next several channels that you want to copy The channels must be sequential for multi channel copying All the selected channels will be highlighted To select all rows point your mouse at the number in the blue box at the left of the first row Left click the mouse Release the mouse Press Ctrl A to select all The entire page will be highlighted Note If you have a lot of chann
7. DTMF Delay Set the amount of time that passes between when the PTT is pressed and the first tone is heard DTMF Memories Enter up to 16 characters into each of the 10 memories for DTMF tones Acceptable entries are 0 9 A D E F and pause Internet Wires Settings The radio can be used to access a node repeater or base station which is tied into the Vertex Standard WIRES Wide Coverage Internet Repeater Enhancement System network operating in the SRG Sister Radio Group mode Access Number Set the DTMF tone for SRG access Auto Dialer Mode Enable or disable the auto dialer for transmission of access tones This auto dialer is independent of that for the non Internet DTMF memories Link Mode Select SRG or FRG as the Internet access mode Memory Selection Select one of the 64 preprogrammed Internet access memories to use for FRG access Memory Channels Enter a DTMF access string up to 8 characters and a Name of up to 8 characters to identify that connection Note Turning on the Internet function is not included in the Programmer When this option is on a DTMF tone is transmitted at the beginning of every transmission This is an annoying and unexpected action of the radio if this option were to be set when you were not ready to operate on the Internet The Programmer makes it easy to configure the settings for the Internet functionality Engaging that functionality is left for you to
8. Select the first cell to be changed by pressing Down arrow until that cell is highlighted the cell will be in the same column so using the Down Arrow key will easily move you to another nearby cell If you need to move quite a way in the file move to the first cell to be changed and click the mouse to select that cell O 2012 RT Systems Inc VX8 and VX8D Programmer Help tua FT 40 Programmer gt Copy and Pasto 3 Tee tor Coamo Settings Wasew Nep DEU we SCS wt Teen Es i 243 2000 143 25000 HAL DI HALA 1427 amsa Laysa mawo 143 20000 Re MRA MU me mans 19339788 mamoa mae MA A aro 14330900 ALI en E Y9LIIIIRLRRIARIILIILARIRIIIIILRLAALALIAIALIRIRLIMGIII ES 5 E WHI 120000 1440000 MAI mhas Hide 14343508 ia hase aoo maae mima Maze aom OR mem men 0000 10090008 msnm nuro masson masae msa 142 5758 HLSROA 147 5108 pases 149254 MASTo 14357500 HIM 103073 snanooa mzee monn mome moa DAKE mema nieme mewo 143 6508 Ps 00 memo Mlee asara 14348788 HENO HENOG Hae Me mansoa 143 7806 MOTH MITA FALTO 14373006 HINA MA HITO marre 0 7 3280003 143 2008 MI SNe maw mase maa 1438973 maewo maoe His heze masno 13706 mo 87 a SESSECESGESESSES ESRC SESS GSES CES ERESSE SEEST b be eS add OOOO RO TS THAT 3 If several consecutive rows are to be changed select them all by holding the Shift Key while you Down Arrow through them or hold the Left Mouse Key while
9. VX8 and VX8D Programmer Help existing files is presented You can either select one of these to be overwritten or enter a new filename The Programmer will add the extension so you should not enter an extension or a period at the end of the filename Save As Es Save in J FT 2600 Programmer f amp amp T Name Date modif Type Size Tags ad amp Settings not coming from radio Recent Places am test Desktop Karin Computer A nter filename here Network Fe came Gee Save astype Rado Data Fies FT2600 8 Cancel e The title bar of the window changes to reflect the new filename e When saving a file let the Programmer do the work All you need to enter is the name you want for the file O 2012 RT Systems Inc 192 VX8 and VX8D Programmer Help 19 19 1 ARRL TravelPlus RT Systems Version 4 programmers have a feature that opens a TravelPlus list in the radio programmer This makes the data available for creating files for programming your radio without the need to import the data from a file This Help file contains sections on creating the list in TravelPlus and on getting that list ready to program your radio Takes only a few mouse clicks to have your radio programmed for that trip or other special event Creating a list in TravelPlus Brief details on this process For more details see the help file in TravelPlus Opening the list in the radio Programmer Details on opening
10. e Press the button on the radio to start the transfer e A transfer status bar is displayed on the computer to let you know that the computer is receiving the data being sent from the radio If the blue green bar does not appear and fill cancel the process and try again Note Ifthe blue green bar does not appear and begin to fill immediately the first steps in troubleshooting are as follows e Do NOT turn the radio off Do these steps exactly as listed here e Cancel the process on the computer e Once the screen closes select Communications Get Data From radio from the main page of the Programmer e When the screen opens skip to step 4 and click OK without doing anything on the radio e Then press the Band key and watch the radio change If it changes to CLONE press the Band key again The radio was always in CLONE mode There was no reason to turn itoffan back on again This often gets the process going after a failure When the Get Data From process is complete the Programmer will return to the spreadsheet of the main window where the information taken from the radio is displayed This information is ready to be edited and saved The radio can remain connected to the computer while changes are being made in the Programmer These changes are not reflected in the radio until you complete the Send Data To process in the Programmer Leave the radio in CLONE mode or turn it off while it is connected to the radio I
11. sE Prog ammer Hep Pies Dreja CORTSaes san E seurceCods Stew Dive sioncbeno Gwite CINCO Yosu Detra Rado Data Fier FTE y Cancel e What you see now are directories the ones with the little yellow folders and files Find the little yellow folder that says Yaesu next to it Put your mouse on it and Left click Once Yaesu is highlighted let go of the mouse button move the pointer to the Open button then use your mouse to left click on the Open button Lock jet leo Local Disk JC My Recent Documents 3 Desitop 33 My Tongass Prog ammer Help Pies Dreja ORTSaes san E SeureeCods Sere Cversionsbeno Gwite Qwicows Detra a _ y Rado Data fies FIER gt eE Comcel Canc e After clicking Open the contents of the Yaesu directory appear 2012 RT Systems Inc File Maintenance 175 Look ir D Vans Coanrs 1e a panees 20 My Recet 3 anes 2 Documents Fro B or DFT Desktop Carra FT50 Carrs Fro rra17 gt ISFriso0 59 a Fraso0 My Computer ETTO I5Fr7100 4 Mp Documerts My Hawek Fle pame Places e In this example there are lots of directories the ones with the little yellow folders since all the original programmers were installed on this machine In your case there is probably only one directory little yellow folder In either case find the FT 60 directory the one with the little yellow folder and the words FT 60
12. Inc 168 VX8 and VX8D Programmer Help 18 File Maintenance Just as in a word process or other Windows based program you will create files in the programmer for use in the radio You can create as many files as the space on your hard drive will allow Remember with the exception of the Icom IC 7000 all other programmers erase everything in the radio and replace it with what is in the file Be sure everything you want in the radio is in the file that is sent This is an all or nothing process From the File menu at the top of the main window select New Create a new file in any Version 3 programmer you have installed Open Open an existing file in any of the Version 3 programmers you have installed Open Travel Plus Link Active only if a list is open in Travel Plus Accesses that Travel Plus list Details on this functionality are available in the ARRL Travel Plus section of the help Close Closes the current file Save Saves the current file Save As Saves the current file giving you the opportunity to enter a new name This creates a copy of the file and saves it with the new name you entered Import Advanced functionality that addresses data from a flat ASCII file Details on this process are found in the Import and Export section of the help Export Extracts data from the programmer file to a flat ASCII file Details on this process are found in the Import and Export section of the help
13. Plus Allante GEORGIA 0146 2 Caje 444 92500 Plus Allanta GEORGIA o 444 97500 Plus Ananta GEORGIA ONCAJAB 442 35000 Plus 100 0 Colega Paik GEORGIA 100 0 RB WX 1292 00000 1272 0000 S k Allante GEORGIA o 145 15000 Minus 167 9 George Tech GEORGA 0 167 9 CAjez 145 45000 Minus Decou GEORGIA 2 442 20000 Neme Callsign Commert Repeste Notes Select Al Selected Bands UnSelect Alt e Select a group of channels Point your mouse at the CHANNEL NUMBER the grey shaded column on the left and left click Don t let go of the left click button if you want more than one While holding the left mouse button drag the mouse over the CHANNEL NUMBER of all the channels you want If there are more than those on the screen just keep going at the bottom The screen will scroll to let you continue your selection Note The entire row of a selected channel will turn be highlighted If only the Receive Frequency is highlighted then ONLY that information will be copied 2012 RT Systems Inc 200 VX8 and VX8D Programmer Help Me Cat Comentan leia Ole Weer hie Ose AME SOLAN de mora El Tetras elect channels to copy ru Plus Pin Ma Pin ru Pres fin Ma Pin ru Pas An Sy Men e Copy the channels With the mouse pointing at the highlighted channels right click and select Copy from the menu that opens OR with your mouse left click to select Edit from the menu at the top of the scree
14. Select an icon which will be displayed on the monitors of other stations with your APRS transmission The new VX 8D has more than 180 individual symbols separated into 4 groups Set one for each group Select one to be used with the 1 4 button selection The radio will use the one selected and have the others immediately available for use through manual selection from the APRS set menu Item 22 My Callsign Enter your callsign to identify your station Message Text Enter text of up to 16 characters for each of the seven fixed form messages Check the box next to the one of these messages you want to use when this file is sent to the radio To select a different message when operating the radio access APRS menu item 6 and select from those that appear Message Group Filter Select an option to receive only specific types of message information Unlike beacon filters message filtering is limited to one selection G1 G5 affect message group code while B1 B3 affect bulletin group code Position Comment A brief description of your station or situation that is O 2012 RT Systems Inc 154 VX8 and VX8D Programmer Help included with APRS transmissions Time Zone Set the time offset between local time and UTC time See the map in the Operating Manual on page 78 for additional information Tx Delay Set the time delay between transmitting the preamble flag code then the APRS data Note When working with the r
15. The information to be programmed for the Home Channels is the same as that for the regular Memories See Regular Memory Channels for the details Once programmed and sent to the radio the Home channels are recalled by pressing the F W then the Hm Rv key while operating in either VFO or Memory Mode The radio will access the Home channel for the band on which you are currently operating To return to the last operating frequency either VFO or Memory channel again press the F W then the Hm Rv key Be sure you have set the functionality of the Hm Rv key to Home with the drop down box on the Settings screen that controls this option Note the UHF 430 Home channel is the one used during Emergency channel operations Plan carefully if you are using that feature of the radio along with other Home channel activities 2012 RT Systems Inc Programming Memory Channels 127 15 7 Marine and SW Memories The radio comes preprogrammed with many frequencies in the Marine and Shortwave portions of the band These channels can be included in the Banks of the radio When operating in Bank mode these channels will be available along with the regular memory channels ina selected bank A channel can be put into none one any combination of or all of the memory banks Note There is no need to put all channels in all banks All channels are available when you are not operating in Bank mode The SW and Marine frequencies are
16. The value must be in the list 2012 RT Systems Inc Programming Memory Channels 119 User CTCSS PR Freq Activates the User programmed Reverse CTCSS Decoder which mutes the receiver when the matching tone is received When this option is selected the User CTCSS column becomes available Select a value between 300Hz and 3000HZz in 100 Hz steps The default is 1600Hz With User CTCSS selected as the Tone Mode the values that appear in the CTCSS and DCS tone columns are ignored by the radio Note User CTCSS is not a feature that allows you to program a custom tone for repeater use Alternately it is not to be used for the tone needed for repeater operations This is a special feature of the radio designed for a specific function rather than general use Pager Activates the Enhanced Paging and Code Squelch system Note When this option is selected none of the tone frequency columns on the main screen become available Tones are not set here for this function See the Enhanced Paging and Coded Squelch EPCS section of this Help for details on setting up the other options for this function Message Activates the Message feature See the section on this feature for details on setting up the other options for this function D Code Digital Coded Squelch mode is activated for transmission only With D selected as the Tone Mode the value that appears in the CTCSS Tone column is ignored by the radio The radio uses the DCS
17. To put the screen into Simple Mode select Edit Simple Mode from the menu While in Simple Mode you cannot access the Preferences screen The Programmer controls what columns are hidden while in this mode Details to be entered for Memory Channels Receive Frequency Enter a receive frequency for the memory channel Acceptable frequencies are detailed in the User s Manual for the radio e Unacceptable frequencies cannot be entered into the Programmer Cellular frequencies are blocked e Memory channels can store any acceptable frequency in any order i e UHF can follow VHF or any other band order e The first memory channel must be programmed e While memory channels can be entered in any order the sub band receives on fewer bands than does the main band Realize that memory channels containing frequencies outside the range of the sub band will not be displayed there as they will be on the main band The radio will simple skip over that memory channel when tuning in memory mode or scanning on the sub band Transmit Frequency Enter a specific transmit frequency or let the Programmer calculate this frequency based on the offset This field is always available however the transmit frequency for an odd split is the only value that must be manually entered Acceptable transmit frequencies are 144 148 MHz and 430 450 MHz Note In the Programmer you can enter details for frequencies outside the transmission abilities of the rad
18. having to erase what is there e Press Enter e The Programmer will set the Offset Frequency and Offset Direction as needed for this pair Ignore these two columns The information in these two columns may change when the file is opened again if the offset can be figured to a 50kHz value and the direction set to plus or minus This gives you back functionality on the radio that is lost with a channel marked Split lf you see this change ignore it The radio will function exactly the same when you use it with these different settings You are finished with this entry unless you need to enter Name Tone or other details for this memory channel Offset Frequency Standard offsets include 100 500 and 600 kHz and 1 0 1 6 1 7 3 0 5 0 7 6 and 99 0 MHz The default Offset Frequency depends on the band of the Receive Frequency being entered i e 2M Band is always 600 kHz 430 Band is always 5 0 MHz etc 2012 RT Systems Inc Programming Memory Channels 95 Although an Offset Frequency is displayed for every memory channel it is not used by the radio if the Offset direction is set to Simplex Yaesu radios can use an Offset Frequency of any value in 50 kHz steps i e any value ending in x00 or x50 where x is any digit from 0 to 9 with a Plus or Minus Offset Direction This gives you the ability to use the Reverse function of the radio although your frequency pair is not separated by a standard offset value Any off
19. while looking at that file do Communications Get data from radio and complete that process Your file will drop to the background and be protected from during this part of the process Once you complete Communications Get data from radio return to your file a select the tab at the top of the page or b select File Open and open the file from the list presented if you closed it some time during the process The Get Data From process reading the radio e Connect the cables properly to the radio See the Radio to Computer Cabling section of this Help for details of that cabling e Be sure the battery is charged completely or that you are connected to an external power source before beginning this process Loss of power during communications may result in a reset radio e The screen that opens has details for completing the process to Get Data From the radio read the radio Read the screen carefully The steps differ with each model All the steps you need to do are listed on this screen Y Get Data From VX 8 e Plug the cable securely into the Speaker Mic jack on the top of the radio Press and hold the FW while turning the radio on Verify the radio displays CLONE Click the OK button e Now that the radio is in CLONE mode click OK to continue 2012 RT Systems Inc 160 VX8 and VX8D Programmer Help Press and release the Band key to start the transfer Cancel
20. 2 during Pe test stop of import Pour Pres es Pres x Pres 7 Pres Pres Pan Pose a Sri x Mn 2 reine E rod pei ddiiiiiclsss O 2012 RT Systems Inc 228 VX8 and VX8D Programmer Help 22 Export The programmer can export convert the data of a radio programming file to a flat file for use in other programs This will create the file that you need is someone asks you for a csv or Excel file You control two parts of export What is exported from the file Where the exported file is saved on your hard drive What is exported from the file The file created through export contains the data on the screen that is open when the process is begun If a radio has Right Memories and Left Memories it will export the data of the Right Memories when you are viewing that screen when the process is begun and the data from the Left memories if you are viewing that screen Each export should be directed to a separate file If you use the same filename you will replace the data from the first export with that of the next Where the exported file is saved on your hard drive Select the section of the file to be exported Click File Export A Save dialog box opens You have complete control of the filename and location of the file on your hard drive in the options in that Save dialog box Pay close attention to the filename and directory designation of the resulting file You want to be able to find it easily
21. 23000 W4IBN 835 Allanta GEORGIA 45 35000 Mirus waDOC Allante GEORGIA 145 41000 Minus WAPME 100 llanta GEORGIA 0100 06 146 62500 Minus 100 0 Em GEORGIA 010 0e 146 64000 em Miras Alanta GEORGIA 146 65500 0151 4aA8 146 73000 1 Miras Allanta a EXE Miras Allanta GEORGE al 146 82000 Minus Allante GEORGA 45 2 CAje 146 97000 Mirus Ki Atlanta GEORGA ot 147 00000 Mius Alanta GEORGIA olCA 447 03000 Plus Allanta GEORGIA o TIR a g Pius 2 Allante GEORGIA oaRB 147 4500 Notice the two tabs The radio file and the Pius Allante GEORGU 01514 CAJAB 147 10500 gt g Pas llanto CARES GEORGA a a ravel Plus List are clearly identified 434 0000 Spk Atlanta GEORGIA o 440 60000 Pras Allanta GEORGIA 442 02500 Plus Allante GEORG 01273 442 12500 Pius Alanta GEORGA o 100 Des 442 22500 Pus Atlanta GEORGIA 442 47500 Pis Allanta GEORGIA 0723 442 52500 Plus Allanta GEORGA 0110 9 442 67500 Pius Allante GEORGIA 0100 0el 442 80000 Pius Allanta GEORGIA otl 442 87500 Plus Atlanta GEORGIA 0100 0eRB 442 97500 Pius Allanta GEORGIA ofca 443 02500 Plus Allanta GEORGIA 01273 443 31200 Pius Allante GEORGU I 443 60000 Pius Ahanta GEORGU 0 145 73RB 443 65000 Plus Allanta GEORGIA 012371 443 80000 Plus Allanta GEORGIA 0151 4 CARB 444 05000 Pis Allante GEORG 01514e 444 15000 Pius Allanta GEORGA 0 100 le 444 45000 Plus Allanta GEORGIA 0145 2e 444 50000 Phas Allanta GEORGIA 01109 444 77500 Pis Allanta GEORGIA 0151 4aCAJARB_ 444 82500
22. Beeps etc are read from the radio with the Get data from command Be sure that settings you have customized are saved in the programmer Access the Settings screen and use File Save to make the options that were taken from the radio permanent for programming the radio later Once saved the settings will be repeated with each new file of memory channel details The programmer has two options for these Settings Multiple Settings files can be created just as multiple frequency files Then you can mix and match as needed to program a radio for a given situation Alternately you can opt to save the Settings as part of an individual file You can find more details on these two options under Using the Programmer O 2012 RT Systems Inc 3 VX8 and VX8D Programmer Help Overview and Radio Menu Settings General Overview in this help Using individual and separate settings files is the default 2012 RT Systems Inc 36 VX8 and VX8D Programmer Help 6 Easy Editing in the Grid Many new data management commands are available in the programming software from RT Systems The commands listed here are available through a right click menu or from the list that opens when you select Edit from the menu at the top of the screen These commands can be used on any of the spreadsheets in the program Right Click Menu Select a row to be edited by clicking on the number to the left of that row You will notice that the entire row
23. Code set in the DCS code column for transmissions only Reception is open for any signal T DCS CTCSS encode tone squelch is activated for transmission and Digital Coded Squelch for reception With T DCS selected as the Tone Mode the values that appear in the CTCSS Tone and DCS Code columns are both used by the radio The CTCSS Tone selection is used for transmissions while the DCS Code selection is used for reception Be sure that you set both the CTCSS Tone and the DCS Code once this option is selected D Tone Digital Coded Squelch is activated for transmission and CTCSS decode for reception With D TSQL selected as the Tone Mode the values that appear in the CTCSS Tone and DCS Code columns are both used by the radio The CTCSS Tone selection is used for reception while the DCS Code selection is used for transmission Be sure that you set both the CTCSS Tone and the DCS Code once this option is selected CTCSS Tone This field is available when Tone Mode is set to Tone T Sql Rev CTCSS T DCS or D Tone Select one of 50 tone frequencies to be used in the Encode or Decode modes This value is set independently for each memory channel 2012 RT Systems Inc 120 VX8 and VX8D Programmer Help A value that appears in this field is ignored by the radio if one of the tone modes that uses CTCSS is not activated DCS Code This field becomes active when Tone Mode is set to DCS D Code T DCS or D Tone Select one of the 104 c
24. Coded Squelch s 2012 RT Systems Inc Internet WIRES Functionality 87 14 Internet WIRES Functionality WIRES Wide Coverage Internet Repeater Enhancement System is a comprehensive and easy to use system for linking repeaters and or home stations together using Internet voice technology Similar to voice over IP phone systems this Internet connection can put you in touch with others around the world using using your handheld Now you can talk around the world using your hand held or mobile radio via a WIRES equipped node You can easily set up your own WIRES node witha minimal equipment investment This site www vxstd com en wiresinfo en contains information regarding the WIRES Internet linking system from Vertex Standard We welcome you to the World of WIRES The site has lots of details for this feature including repeater frequencies tones and access IDs Find the latest details there The radio can be used to access a node repeater or base station which is tied into the Vertex Standard WIRES Wide Coverage Internet Repeater Enhancement System network The VX 8 can operate on the SRG Sister Radio Group or FRG Friendly Radio Group mode Note If other users report that you always have a DTMF beep at the beginning of each transmission and you are not operating in conjunction with Internet access disable the Internet access feature from the face of the radio by quickly pressing
25. GEORGIA 100 0eRe 442 97500 Mas 442 97500 Pre WAAYNZ Allanta GEORGIA AICA 443 00500 Iff 27 43 02500 Phas WAML 1273 Allanta GEORGIA 0127 3 44320200 i 2 44331200 Pius WEAQL Alla GEORGIA 1 443 60000 s 12000 Pus KASWzY 1457 Alania GEORGIA 0 145 70R8 443 65000 Mi 20 443 65000 Phs WACML 1237 Allanta GEORGIA 012371 443 80000 Iff a1 443 80000 Phas NANFP 1514 Alania GEORGIA 0151 4 CARB 444 05000 2 444 05000 Pius N4NEQ 151 4 Allante GEORGIA 0151 4e 444 15000 B 44415000 Pius WEPME 1000 Allante GEORGIA 100 de 444 45000 34O 44445000 Plus WEDOC 1452 Allanta GEORGIA 0145 20 44450000 35 44450000 Pus KOAGPI 1109 Allanta GEORGIA 01103 444 77500 26 444 77500 Phas NANEO 1514 Alania GEORGIA 0151 4alCAJARB 444 82500 37 444 6050 Pra W4DOC 1452 Allante GEORGIA 0146 2 CAje 444 92500 38 440 92500 Plus WaAaNNO Allanta GEORGIA o 444 97500 39 44437500 Pra WAAYNZ llanta GEORGIA offCAJAB 442 36000 40 442 36000 ws KG4PTO 1000 ColegsPak GEORGIA 1000RBWK 128200000 41 129200000 12720000 Sok KB4KIN Alana GEORGIA o 145 15000 a2 14515000 Minas wand 1673 GeegeTech GEORGIA 0167 3 Cajez 145 45000 k 5000 Minus wanoc Decatur GEDAGIA 2 442 20000 7 A Modules Name Callsign y Commert Repeste Notes Select All Selected Bands UnSeiect All Ready e SS I CAP NUM SCRL A E J Customizing the list for the radio file Several selections appear at the bottom of the window that contains the list These options control how the programmer will handle the data
26. Level The volume of the beep is controlled by the audio volume level The volume of the beep can be adjusted relative to the volume by setting the level in this option Beep Mode Select which action will cause the radio to emit an audible tone Off No sound is heard Key Scan A beep is heard when a key is pressed or when scanning halts ona signal Key A beep is heard when a key is pressed CTCSS DCS Bell Tone squelch operations have the option of sounding a bell when a callis received This field sets the number of rings for the bell FM Speaker Output Control audio output for FM Broadcast 2012 RT Systems Inc Programming Other Set Menu tems 149 Auto The FM Broadcast audio output is directed automatically to the internal speaker or the earphone depending on connection of the earphone antenna Speaker The FM Broadcast audio output is heard through the internal speaker and the earphone FM Broadcast Enable disable the stereo output while listening to FM broadcast Set to stereo to enable or mono to disable This is separate from the control for Bluetooth operations User Beep Melody Select the note and duration of that note for your own personal melody that sounds when a call is received during CTCSS operations User Beep Selection Select the User Beep to be used Enter the melody for the User Beep in the User Beep Melody section on this screen Volume and Squelch The radio has independent a
27. Menu Settings Common tab Lock selection from list box for Lock condition Step Main screen Name This option can be set for each memory Name channel Protect check box channel Write Settings Radio Menu Settings Messages tab Member list in Message Member List section Register in the Message Select List section Settings Radio Menu Settings Message tab Message Text in Select the Message Select List section 60 Mic Gain___ Settings Radio Menu Settings Common tab Mic Gain 63 Off Timer Settings Radio Menu Settings Common tab Off in Timers section Settings Radio Menu Settings Common tab On in Timers section Settings Radio Menu Settings Messages tab Type in Message Opening Message section i e Ans Back Back in Pager section Rx Codes in Pager section 2012 RT Systems Inc Menu Item Cross Reference 6 crean Code Tx Codes in Pager section Password section a PR Main screen User CTCSS This option can be set for each Frequency memory channel The Bae cannot be changed unless Tone Mode is set to User CTCSS selection AAA Settings Radio Menu Settings Common tab Priority Revert check box Settings Radio Menu Settings Common tab Priority Time PTT Dela Settings Radio Menu Settings Common tab PTT Dela Shift check box Main screen Offset Direction This option can be set for each memory channel RPT Shift Main screen Offset Frequency Thi
28. Menu Skip APRS GPS Altenuator Broadcast Antenna AM Home VFO Dial Moni TCal SpecAnalyzer BlueTooth Set Password atten iain bata BAR amp EXT Enable vj Mori zj 1 Time q fom gt Enable F Attenuator Weather Antenna FM HM RV Priority Time Time Out Tienes gt EZ Auto Repeater Shit EXT Antenne v Reverse w Sseconds v 30min X Mode Mono xj Programmable Key Assignments Busy Channel Lockout Audio Mute Level Lock TEnable PTT Delay VFO Mode Save Ott x Intemet Key Y Busy LED Off y Disl Key Off v Band X E 4 Intemet gt oae On x Y Fast Tone Search Auto Power Off Mem Fast Step RX AF Dual VOL Key Mode EX My Key Memory Protect or 10CH TAX1sec Hok X P Code 6111 DC Voltage r Priority Revert Channel Counter Memory Wite AxSawe Vox Spit Tone s5MH2 v New y 200 me of Timers Scanning Y Tone Search Mute i ic G i Enable Y Lamp I Aw Key Timer Mic Gain Smart Search Vox Delay Olt Tx Save 05sec vi Leva5 x Single v O5 seconds y 00 00 Memory Scan Mode Display PLE Al Channel y Dual Mono Sensor Lamp Set Mode Cursor On 00 00 VEO Scan Mode Dual Receive v DC x Key5sc gt gt Band y Altitude Units Offset Temperature LCD Contrast Set Mode Format Weather Resume Mode feet y 04 Fakvenhek x Levelt x List a Weather Aleit 5 0 sec gt Barometiic Units Offset Wave Monitor LED Dimmer S Meter Symbol Active Channel Restart Time mb oO a v leeis GMM 1 162550MHz v 20sec Y
29. Print Preview Lets you see the formatted information on the screen before it prints Print Prints the current file Send File as E mail Sends the current file to RT Systems tech support This functionality is dependant on the e mail program of your computer Files 1 4 Up to four files that you last worked in and saved Exit Closes the programmer O 2012 RT Systems Inc File Maintenance 169 18 1 File Exit Exits the Programmer If files have been changed you will be prompted to save or cancel the Exit command to avoid data loss in that file Radio Programmer Ea gt Save changes to test Yes Exits the program saving the file No Exits the program without saving any work done in the file since the last time you saved Cancel Halts the Exit option The program returns to the open file 18 2 File New Use this command for setting up a clean slate into which you enter memory frequencies A clean slate or default file will often have at least one channel programmed on the memory channel screen This is a factory default that is in your radio when it is new The information for this channel can be changed however in most radios channel 1 must be programmed Use the quick key command of Ctrl M for easy access to a new file If you have been working to create a file with memory channels use File New before using Communications Get data from to prevent losing all the work
30. There is a possibility that this frequency can be used by an amateur radio As discussed earlier both the Reference Step and the Step of the radio are used to determine a valid frequency Models vary While this frequency passed 2012 RT Systems Inc Invalid Frequencies 243 the validity test for certain amateur radios that in no way implies that it will work on your particular radio For this particular frequency to work in your particular radio it is necessary that the radio have a 6 25 kHz step available in the Step option of the Set menu 2012 RT Systems Inc Hardware Error Troubleshooting 245 25 Hardware Error Troubleshooting Well of course the information in the radio and the file do not match just made changes to the file and want the different information in the radio This is a common first reaction to this error However that is not the file information involved in this error There are several causes for this error They include incorrect key strokes on the radio interference on the computer by another application or device a faulty cable or the presence of a radio that has been modified for out of band use P Communication Error ls D m The information in the radio does not match that of the file Click OK for more information about this error Click Cancel to cancel and try again Cancel Below are various steps offered as corrections At the end of each
31. Vol key while turning the Knob to adjust the volume or whether the Vol key holds automatically for 3 seconds during which time adjustments can be made using the Knob Options are Normal Volume adjustment via the knob is possible while the Vol key is being held 3 Seconds Volume adjustment via the knob is possible for 3 seconds after the Vol key has been pressed and released the Vol key does not have to be held during that adjustment Vox Enable and set Vox sensitivity Vox is the ability to transmit through the radio without pressing the PTT The radio becomes voice activated While this feature is good in some situations remember you are not the only thing it will hear and transmit In a noisy setting you radio could transmit continually making communications impossible for others on that frequency 2012 RT Systems Inc Programming Other Set Menu items 143 Vox Delay Set the Vox delay or hang time This is the transmit receive delay at the end of a signal through the Vox system i e it s how long the radio will continue to hear you after you stop talking Weather Alert Enable or disable the Weather Alert Scan process of the radio With this option enabled the radio will check the weather channels for activity every five seconds while scanning in VFO or memory mode The default for this option is Off or unchecked Note Since weather emergencies can arise at any moment it is recommended that you review the We
32. a En EN hele HHHHH HH nr H AO AIT T Under Printer setup change the margins to print on as much of each page of paper as possible Again this can make it possible for all the columns to fit on one or half the number of page Use Zoom to read the data in the preview more easily Click Zoom again to return to this view 188 VX8 and VX8D Programmer Help 18 6 Saving Programming Files Many different files can be saved to your hard drive for permanent storage giving you the ability to reprogram your radio quickly and easily to suit your current use e Files are saved using the File Save or File Save As command e When the window opens for the filename enter any name up to 256 characters including spaces but without a period at the end or an extension The Programmer will enter that information for you automatically Save As E Save in FT 2600 Programmer f amp amp Name Date modif Type Size Tags my fs Settings not coming from radio Recent Places test Desktop Karin Computer da Enter filename here Network Fie name Ce Save as type Rado Data Fies FT2600 X Cancel 18 6 1 File Save Saves the current file to your computer hard drive If several files are open the current file the one on top the one you are working in is the one that will be saved Be sure to save the changes to each of the open files before closing the Programmer It is recommended that you save t
33. a Version 3 file from a different radio The steps detailed here are based on the directory structure of this machine Make changes to directories as needed to locate files that you want to open Files that you create in Version 3 can now be shared easily with anyone else who has a Version 3 programmer Simply post the Version 3 file for anyone to download In this example a file for the Icom IC T81 will be opened to be sent to the Yaesu FT 60 e Open the FT 60 Version 3 programmer o ra lane ste roma oda crces ocs mp skp Simple wjn sf O Y sje ja ee Frequency Frequency Les an coo Frequency z 2012 RT Systems Inc File Maintenance 179 e From the menu at the top of the screen select File Open A box appears from which you select the programmer for the radio to be programmed in this case the FT 60 FT 1802 Radio Data File A FT 1807 Radio Data File E Cancel FT 50 Radio Data File Cancel v e An Open Dialog box appears By default it is looking in the FT 60 directory since itis trying to help you find an FT 60 programming file You will change directories to where the file is stored that you want to open Note If you received the file via e mail or from an Internet site you chose where it was saved Personalize the steps here to move to that location Look jee E 10 781 Pogana My Recert Documents 3 Desktop Mp Docurerts My Computer My Helm Ele pame Place
34. an original AND a new D model radio there will be extra steps and file management for programming the two Note Whenever you do File New and open a new VX 8 radio programming file the Programmer will tell you which radio it is ready to address In the titlebar at the top of the Programmer VX 8 Programmer for the original or VX 8D Programmer for the new D model willbe shown The presence of the D lets you know that the Programmer is ready to send data to the D radio If you plan to work on your Original VX 8 radio and the titlebar shows VX 8D execute Communications Get Data From radio into a new file using the original VX 8 radio This will switch the Programmer back to being dedicated to the original VX 8 Suppose you have a new D radio as your only VX 8 radio You are working within one Programmer for one radio No extra attention to file management is needed other than the initial Get Data From radio process Execute Communications Get Data From radio with your new radio O 2012 RT Systems Inc 90 VX8 and VX8D Programmer Help Save the file Use this file to enter frequency information Make any other files that you want You will always have all the details of this radio available for programming Access Settings Radio Menu Settings Make necessary changes Save the Settings file for the new radio Suggestion Name the file in a way that you know in the future that it is for a D radio This i
35. and 10 0 kHz are available e Air band includes 8 33 kHz This step value is not available in other modes e 5 kHz not available in 250 300 MHz range or above 580 MHz Mask A masked channel is not available for use either during scanning or when the radio is tuned manually in memory mode Masking a channel hides it until you unmask it from the face of the radio or by sending a file with this option unchecked Only then will it be available for use This is a good way to prevent another user from accidentally accessing a channel or to store memories for another area that are used only when you visit that place Attenuator Check to enable the front end attenuator that will reduce received signals and noise in an attempt to make reception better in a noisy setting With this option On weaker signals may not be heard The options are On checked and Off unchecked The default is Off This is normally a global option in Yaesu radios This is the first of the radios that allows you to control attenuation for each memory channel giving you more control for operations on each channel 2012 RT Systems Inc 122 VX8 and VX8D Programmer Help Internet Enables disables connection into the Vertex Standard WIRES Wide Coverage Internet Repeater Enhancement System network See the Radio Menu Settings DTMF Internet section of this Help for more details S Meter Squelch Adjust the RF Squelch threshold level As the squelch lev
36. are details that the Programmer can get only from the radio Even if the radio is not yet programmed these background details are necessary for the Programmer to send a file to your radio successfully To complete this process 1 Select File New from the menu at the top of the screen 2 Turn off the radio 3 Select Communication Get Data From Radio from the menu at the top of the screen 4 Complete the process detailed on the screen 5 Once the process is complete click the tab at the top of the screen showing your filename The file that you want to send to the radio will be displayed on the screen 6 Select Communications Send Data To Radio from the menu at the top of the screen 7 Complete the process following each step carefully to program these chamnels into the radio Modified Radio lf your radio has been modified you need to read from the radio Get Data From into a new file before you attempt to write data to the radio When the Get Data From process is used even if the radio is not yet programmed the Programmer gets the data it needs to know that the radio is modified When you use Get Data From for the sake of establishing communications you need to save the file ONLY if you want to save the memory data that is currently in the radio The Programmer already has what it needs The option to save is available should you want to save the pre programmed data The radio is not programmed after the proce
37. available when operating in Broadcast or Marine bands 2012 RT Systems Inc Programming Other Set Menu tems 129 16 Programming Other Set Menu Items Programming any radio involves details for each memory channel and settings that are global to the radio no matter which memory channel VFO or Call channel you re operating on The Memory Channel details are entered on the grid that appears when the Programmer is first opened This is only part of what needs to be done to make your radio your own The global settings are entered on the screens accessed from Settings Radio Menu Settings in the menu at the top of the main screen Don t miss these settings Getting them the way you want them can significantly enhance the performance of your radio Details for the options are found in sections of this Help that correspond to the screens in the Programmer where you will find that option Everything starts in the Programmer from Settings Radio Menu Settings from the menu at the top of the main screen Radio Menu Settings Common The screen that opens when you select Settings Radio Menu Settings This screen contains the more commonly changed settings such as Beep Lock and options for Scanning functions Radio Menu Settings ARTS CW EAI Options on this screen include those for ARTS Auto Range Transponder System Pager EAI Emergency Automatic Identifier other Emergency operations CW ID and CW Training Radio Menu S
38. be skipped PScan or 2 to mark the channel as Preferential Scan Step The frequency being used by the radio changes by the value of the step when tuning manually This value is used by the radio in Memory Tune mode This value is not critical in memory mode since the original memory channel frequency can be retrieved by exiting Memory Tune mode Enter 5 10 12 5 15 20 25 50 or 100 as needed Clock Shift Shifts the internal reference frequency slightly to eliminate birdies that interfere on other channels Enter On or 1 Off or O 2012 RT Systems Inc 220 VX8 and VX8D Programmer Help 21 2 Tx Power The output power can be set individually set for each memory channel to address the exact needs of each operation Enter High Med Low Half Deviation Enter On or Off as needed for the channel Comments Enter an identifying comment up to 80 characters You can see by the details here that creating a file for import can be a tedious process Although this process is very valid for transferring data from one radio Programmer to another and for using the data from other sources such as ARRL Travel Plus it is not recommended for original file creation Let the Programmer help you as you create your original file with its defaults and automatic settings Once the file is created you could export the data for other uses The comma delimited file can contain this information in any order It must contain only the Receive f
39. channel information and settings that you use everyday When a new file is begun the same settings used in the last settings file saved will be used automatically You need not re enter the settings each time nor are you forced to always begin a new file by renaming an existing file You need only enter memory channel details To select a settings file for use e Select Settings Radio Menu Settings from the main page of the Programmer e From the Radio Menu Settings screen select File Open A list of settings files will be presented Do not change the Files of Type selection at the bottom The Programmer presents appropriate files to choose from e Select the file you want to use and click Open e Verify that this is the settings file that you want to use Check also that the proper filename appears in the titlebar at the top of the Menu Settings window O 2012 RT Systems Inc 132 VX8 and VX8D Programmer Help e Click File Save to reset the Programmer to use this file e Select File Exit to close this screen These settings will be sent to the radio with the memory channel file until you change this file selection again Save the settings as part of the file with the memory information You have the option of saving the global settings with the memory channel information This feature is good two ways First if you think that you ll always use only one file for programming and you are more comfortable knowing tha
40. features and functionality of the radio The final reference for a feature of the radio is the Users Manual for that radio Any error omission or misrepresentation of a radio s ability is unintentional The Programmer cannot make the radio do anything that it cannot do from the face of the unit It makes it easier to set options for the existing functions 2012 RT Systems Inc VX 8 and VX 8D Comparison 11 1 VX 8 and VX 8D Comparison Working with the original VX 8 and the new VX 8D in the Programmer Upon visual inspection of the original VX 8 and the new VX 8D it is impossible to tell the two apart unless you check the label under the battery Identical in appearance and similar in features the differences in the features become significant when programming the radio with the software Their little brains are significantly different when viewed by the Programmer The ADMS VX8 Programmer contains details for both the original VX 8 and the new VX 8D which will be referred to in this Help as Original and D for clarity To access the added features for the VX 8D execute Communications Get Data From radio Only the radio can tell the Programmer that it is a D model If you are switching between an original and a new D radio execute Communications Get Data From radio into a new file each time you switch between radios to let the Programmer know which radio is being addressed The Programmer makes it possible to u
41. for the channel to be used Note This must be a UHF frequency 2 Setting up the CTCSS Tone Pair into the Receiving Pager Memory e Access the Settings screen using Settings Radio Menu Settings from the main screen of the Programmer e Once there select the ARTS CW EAI tab e The CTCSS Tone pair is selected from those available in the Receive Codes fields of the Pager section 3 Entering the callsign name or other identifying information into the CW ID O 2012 RT Systems Inc VX8 and VX8D Programmer Help e This will identify the receiving radio in the emergency situation the one of the person in trouble This automatic ID option is especially useful when voice transmission is not possible e Access the Settings screen using Settings Radio Menu Settings from the main screen of the Programmer e Once there select the ARTS CW EAI tab e Enter your callsign name or other identifying string up to six characters in the CW ID 4 Setting the response interval e Access the Settings screen using Settings Radio Menu Settings from the main screen of the Programmer e Once there select the ARTS CW EAI tab e Set Timer in the EAI section on this screen The radio can be set to transmit a brief 0 5 second beep tone every 2 5 seconds Interval or to transmit continuously Continuous for the time assigned O 2012 RT Systems Inc so VX8 and VX8D Programmer Help 12 Emergency Operat
42. for the details that the Programmer expects to import You will also see the format of the information You can edit or add to this file with any commercial spreadsheet program or text editor Note The new features off the programmer include the ability to enter a series of channels by entering just a beginning frequency and the number to be entered column editing copy and paste of one or multiple rows of data rearrangement of columns hiding columns that need not be edited and automatic completion of data based on band defaults for a frequency entered Given that the programmer is designed for the data of the radio you might find editing in the programmer easier than using another spreadsheet program The file to be imported must contain at a minimum Receive frequency to define a valid memory channel The programmer will fill the rest of the details for that channel with defaults just as if that frequency had been entered The Programmer makes no assumptions about the information available If a piece of information is omitted the Programmer imports the memory as a simplex channel and fills other fields with defaults Although this process is very valid for transferring data from one radio Programmer to another and for using the data from other sources such as ARRL Travel Plus it is not recommended for original file creation It can be tedious getting all the information into the file to be imported just like the Programmer wants it Let
43. found on several pages of this Help Each page contains the details for the options on that page The pages in the TOC begin with the words Radio Menu Settings The information there can help you decide how best to customize a setting Once you complete your selections 2012 RT Systems Inc Programming Other Set Menu Items 131 e Click File Save e If you are working in a default file Untitled rsf you will be prompted for a filename e Enter a name for this file This can be the same as the name you re using for the memory channel information or it can be a name unique to these settings IKf you re at a loss use Settings e Click Save to close the Save dialog e Click File Exit to close the Settings screen The Programmer will take it from here making sure these customized settings go to the radio along with the memory channel information Creating and using multiple global settings files There may be global settings of the radio that you want configured differently for different activities You can make changes to your settings file and save it separately Having multiple memory channel files radio name and multiple global setting files rsf gives you the ability to mix and match the features of your radio to suit your needs This makes it easy to customize the radio for a special event without disturbing the original programming files Then once the event is over simply reprogram the radio with the memory
44. from the list in creating the radio programmirg file These fields and their options are described below e Selected Bands Lists the bands of the frequencies in the list All the bands are selected by default Uncheck those that you don t want as part of the file for the radio If you are programming a 2 Meter radio with a file that contains 6 Meter repeaters you can choose to eliminate those frequencies in this step to better understand what will be contained in your resulting file If you skip this step the programmer will omit these frequencies in the resulting radio file since the radio does not operate on these frequencies If you do not eliminate the bands that cannot be used by your radio the resulting radio file will contain blanks for each frequency the programmer 2012 RT Systems Inc 1 VX8 and VX8D Programmer Help removes during file creation Although the radio does not care you may not want all those blanks in your radio file If the TravelPlus list contains too many frequencies for the radio using the Selected Bands option would remove unused frequencies thus lowering the number in the file and making it possible to create a radio file with all those frequencies that you want i e Your TravelPlus file has 512 frequencies in the selected area Your radio has 450 channels You Select Bands and eliminate 6M 10M and 220 Mhz Bands The resulting list now has 432 frequencies few enough that they all will fit
45. from the radio Communications Get data from and send that file back to the radio Communications Send data to without saving the memory information that you retrieved This is helpful if you are programming a friend s radio in which he has all these options set up as he wants them The File New command can be used to open several new files at once Memory channel information can be copied between these files even from V3 to V4 regardless of which radio they are for 2012 RT Systems Inc File Maintenance 171 18 3 File Open Just as in a word processor or other Windows programs the command opens a previously saved file You are not limited to one programming file for your radio Make as many as you want Then choose the one you want when you open the programmer Working with the programmers is a little different if you have one programmer or several programmers installed on this machine Click the topic for details on Opening a file with the Version 3 or Version 4 programmer One Version 3 or Version 4 programmer installed The Version 3 and higher programmers allow you to share Version 3 and higher files from other radios even radios from other manufacturers Click the topic for details Opening ANY Version 3 file There have been many RT Systems programmers over the years The Version 3 or higher programmers can open and convert files from those older programmers Click to topic for details Opening ex
46. in other modes e 5 kHz not available in 250 300 MHz range or above 580 MHz Mask A masked channel is not available for use either during scanning or when the O 2012 RT Systems Inc 100 VX8 and VX8D Programmer Help radio is tuned manually in memory mode Masking a channel hides it until you unmask it from the face of the radio or by sending a file with this option unchecked Only then will it be available for use This is a good way to prevent another user from accidentally accessing a channel or to store memories for another area that are used only when you visit that place Attenuator Check to enable the front end attenuator that will reduce received signals and noise in an attempt to make reception better in a noisy setting With this option On weaker signals may not be heard The options are On checked and Off unchecked The default is Off This is normally a global option in Yaesu radios This is the first of the radios that allows you to control attenuation for each memory channel giving you more control for operations on each channel Internet Enables disables connection into the Vertex Standard WIRES Wide Coverage Internet Repeater Enhancement System network See the Radio Menu Settings DTMF Internet section of this Help for more details S Meter Squelch Adjust the RF Squelch threshold level As the squelch level increases weaker signals are not heard and incoming noise is eliminated when listeni
47. in the same operating band as that of the channel where scanning was begun PMS X Scanning includes only those memory channels within the selected PMS frequency pair The PMS Programmed Memory Scan limits are set as Limit Memories in the Programmer Scan Restart Time Used in conjunction with Busy resume mode scanning begins again once the signal has been lost for the time designated Scan Resume Mode Determines how the radio will restart scanning once a signal has been heard 2 10 Seconds Scanning will halt for the time selected when a signal is heard It will restart even if the signal is still active 2012 RT Systems Inc Programming Other Set Menu tems 141 Busy Scanning will halt on a signal and remain there until the signal is lost for a time set in the Scan Restart option Hold Scanning will halt on a signal and remain there Scanning must be restarted manually VFO Scan Mode Select the scanning to be performed while in VFO mode Band Scanning includes frequencies in the current band Note Step is an important part of scanning Set too low scanning may be too slow Set too high you may miss frequencies you really wanted to check VFO step is adjusted in the Programmer on the VFO tab It can be set independently for each band All Scanning includes frequencies across the entire receiving range of the radio other than the FM broadcast band Remember the radio has Skip channels that mark a freque
48. is highlighted not just the Receive Frequency cell Release the left mouse button You will notice that the row remains highlighted until you left click someplace else on the screen of the programmer Note You can select several rows at once to copy delete etc by clicking on the number to the left of the first of the selection then while holding the left mouse button drag the mouse across the number of each of the channels to be included This must be a continuous group With the mouse pointing at the highlighted area anyplace as long as the point of the mouse pointer is within the highlighted area press the right mouse button A menu opens with editing options Release the right mouse button once that menu opens Use the mouse to point at the desired command Left click the mouse to execute that command Edit Menu Select a row to be edited by clicking on the number to the left of that row You will notice that the entire row is highlighted not just the Receive Frequency cell Release the left mouse button You will notice that the row remains highlighted until you left click someplace else on the screen of the programmer Note You can select several rows at once to copy delete etc by clicking on the number to the left of the first of the selection then while holding the left mouse button drag the mouse across the number of each of the channels to be included This must be a 2012 RT Systems Inc Easy Editing in
49. next to it Find the FT 60 directory Point at it with your mouse Use the Left mouse button to click onit Release the mouse button Move the pointer to the Open button Left click the mouse once on the Open button Lookin FTS X WD My Recert Documents O Desktop Mp Docunerts PE My Cosigastes My Network Fie pame Places Fies of ype Rado Data Fics FT50 e Yes a blank screen appears This is normal Atthe bottom of that screen find the Files of type box Use the left mouse button to click on the down arrow at the right of that box Select Old Radio Files rdf from that list The names of the available files will appear on the screen O 2012 RT Systems Inc 176 VX8 and VX8D Programmer Help Look ire E FTS J Otm O 3 ona Reed rdf E RadoReod rd Hy Recert Documents 6 Desktop e Use the mouse to point at the name of the file that you want to open Click the left mouse button once to select that file Lock in E FTS0 Sf orignal Read rd My Recent Documents 3 Deshtop gs My Competes My Heiek File pare RadioRead2 oct X io El Fies of type Old Raho F es 18 Cancel e Release the left mouse button Move the pointer to Open Click the left mouse button once to open the file O 2012 RT Systems Inc File Maintenance 177 OSA the Seva asi Y ET 60 Daitiods 147 61000 600 tH 147 61500 600 tH 147 62000 600 tHe 147 64500 600 kHz 147 6500
50. of these option are discussed in detail in the Using the Programmer Overview section of this help 2012 RT Systems Inc eo VX8 and VX8D Programmer Help Memory Defaults You have complete control of the programmer These options control default values for the channel data for memory channels VFOs Limits Home etc Making one change here controls how a channel will be completed when a frequency is entered To access the Memory Defaults screen e Select Settings from the menu at the top of the screen e Select Preferences e Once on the Preferences screen select the Memory Defaults tab Preferences Grid Display Memory Delauks N Check ShowName Automaticaly Y Corwest Spit olfsets to standard Plus ot Minus when avaliable Disable CTCSS DCS and other Tone columns accarcng to the Tone Mode selection Offset Frequency Defouks fm 1 00MHz 2m E00kH2 X 1 23m 160MH2 70cm f500MHz v Check Show Name Automatically For radios with an extra column for show name having this option selected checked lets the programmer mark that check automatically when you enter a name for that memory channel this eliminates that extra step With this option checked you can uncheck a Show Name box at any time if you would rather display the frequency for a given memory channel 2012 RT Systems Inc Screen Appearance and Default Options 61 Convert Split Offsets to standard Plus and Minus when avail
51. other PDA devices printers cameras and others all install programs for their use Unfortunately many of these programs run constantly looking to be used any time a cable is attached These programs take control of the cable even if it is not for their device This renders the cable useless for its intended purpose You may not even be aware that these programs are running You may have sold the device months ago but unless you took steps to permanently disable the software for it the problem remains These programs run start whenever the computer is started or brought back from hibernation then run in the background with little indication that they are there Begin checking by hovering over each icon at the lower right of your screen Those in the taskbar A name will appear as you pass over each You may recognize the one that needs to be disabled Usually an option to Exit or Close will be available from a right click menu Don t worry about exiting something you might need The application will begin again when you restart your computer After addressing a program check in the programmer You should be able to click OK on the Communications Get Data from screen and have the process continue instead of raising the error message Tech support at RT Systems will be glad to help you with this but we are limited given this is an issue specific to the applications running on your machine You are welcome to contact us for help with this
52. section try again to transfer data to the radio again Try this First The error most likely indicates that behind the scenes information about the radio does not match that of a factory radio This is most common when a radio has been modified for our of band transmission 1 Create a new file press Ctrl M on the keyboard or select File New from the menu at the top of the screen This protects the file that you are trying to send to the radio 2 Select Communications Get data from Radio from the menu at the top of the screen 3 When this is completed successfully return to your file click to tab at the top of the screen that displays the filename or select File Open to reopen your file 2012 RT Systems Inc 246 VX8 and VX8D Programmer Help 4 Select Communications Send data to Radio Be careful to follow these steps shown on this screen Generally they are different from the Get Data from radio steps Radio Issues Error is displayed on the radio Behind the scenes information about the radio does not match that of a factory radio This is most common when a radio has been modified 4 Create a new file Ctrl M or File New 2 Execute Communications Get data from Radio This is the only way this behind the scenes information can be obtained for your radio 3 When this is completed successfully return to your file 4 Execute Communications Send data to Radio begin careful to fo
53. the Grid continuous group Holding neither of the mouse buttons move the mouse pointer to Edit in the menu at the top of the screen Press the left mouse button to select this menu option Holding neither of the mouse buttons use the mouse pointer to select one of the editing options shown in the menu Click the left mouse button to execute this command Editing Commands The examples here will use the programmers for the Yaesu FT 60 ADMS 1J and the Icom IC 91 WCS 91 You will see by the screen shots that you can copy and paste between files even files for radios from different manufacturers The programmer will take care of the similarities and differences Cut Ctrl X Removes the selected entry and leaves the memory channel blank This feature is designed to work for deletion of all the data in a memory channel rather than data in a specific column Copy Ctrl C Copies the selected data You can copy two different ways Copy all the details of a Memory Channel one or several at once or Copy details within one column from one cell to one or many at one time e In most cases data can be copied from one tab to another as in left and right memories e It can also be copied from one programmer to another both files Version 3 or Version 4 or even between Version 3 and Version 4 files e Data that is not appropriate for where it is to be pasted i e a VHF frequency into a UHF channel will not be pasted
54. the Programmer help you 2012 RT Systems Inc 24 VX8 and VX8D Programmer Help as you create your original file with its defaults and automatic settings Once the file is created you could export the data for other uses Creating a file for Import Checking a file to use with the Programmer If you are given a file that you want to import into a programmer for use by your radio and are not sure if itis a flat file test the file by opening it with Windows notepad If the Notepad display is full of strange characters with very little legible text this file is not ready to be imported by the programmer The file may or may not be able to be used for import depending how itwas created and saved Try opening the file in Microsoft Excel or other commercial spreadsheet program If everything looks good there carefully save the file in as delimited text this could be called several different things in the program that you are using If the first one you try does not produce the file format that you want try selecting a different File Type during the save process The details for this process are included below for Microsoft Excel Open the file that you created during the save process in Notepad As before if the display is legible data separated by commas you are well on your way If however the data appears in one very long line you should return to the original source to extract the data with line feed breaks at the end of each
55. the cloning process The radio never went into send TX mode Get data from radio process Now that the radio is in Clone mode one more button press is required to start the data transfer Get data from or to make the radio ready to receive the data Send data to 1 The wrong cable is being used This is true for several of the hand held radios that use the 4 pin plug If you attempt this process with a stereo plug the radio will not respond when you attempt to access the Clone option of the startup menu 2 The keys on the radio are locked Turn the radio off then back on in normal mode to check for a lock symbol on the screen Once the keys have been unlocked power off the radio and begin the Communications process again Radio is not on at the time of data transfer This can get the process out of sync Cancel the Communications screen on the computer Then access that screen again and start over with turning the radio on in Clone mode Be sure the battery is charged on your handheld radio or that you are connected to external power to prevent an unexpected shutdown during this process General Issue Followed the Steps Incorrectly or executed the wrong process Get data from the radio 1 Go to Communications in the top menu 2 Click Get Data from Radio 3 Read and follow each step Remember the keystrokes are different for each 2012 RT Systems Inc 248 VX8 and VX8D Programmer Help radio The
56. the list in the radio programmer and the controls on that list Using the TravelPlus list with an existing radio programming file Sometimes you don t want all the repeaters found for an area by TravelPlus or you want to put what you found into a certain group of memory channels in the radio programming file This section details how to use the list selectively in the radio file TravelPlus is a product of the American Amateur Radio League Any images from TravelPlus included in this help are copyrighted to DHF Systems LLC Creating a list in TravelPlus RT Systems Version 4 programmers have a feature that opens a TravelPlus list in the radio programmer This makes the data available for creating files for programming your radio without the need to import the data from a file These instructions very briefly cover creation of the list from TravelPlus It is not intended to teach you to use that program Detailed instructions are included in this help for using the information from that list in a file for programming your radio Open TravelPlus from the link provided when that program was installed Selecta location or create a route 2012 RT Systems Inc ARRL TravelPlus 193 Once you have the area defined on the map click the Create List button from the top of the screen TravelPlus displays the list of repeater frequencies found within your search area CNT SOMERT 245 3100 UCSOR acc jalz 47 0 T J 1
57. the offset for VHF and 5 MHz for the offset for UHF if no other offset is specified Non Standard Offsets The Offset Frequency can be used in conjunction with Offset Direction for a value in 5 kHz steps i e any value ending in xx5 where xis any digit from 0 to 9 This gives you the ability to use the Reverse function of the radio although your frequency pair is not separated by a standard offset value This is considered a non standard offset To use a non standard offset in your text file enter the Receive Frequency Then the Offset Frequency as an exact value including the decimal to denote kHz For example given the pair 146 650 and 147 300 the Offset Frequency entered would be 650 decimal six five zero And the Offset Direction as Plus or Minus With these three pieces of information the import process will setup this memory channel correctly for use by the radio with the most functionality Note You may see this import with one of the standard Offset Frequencies however once the file is saved closed and reopened the Plus or Minus and the Offset Frequency value as entered will appear Offset Direction The Offset Direction lets the Import process know whether to add 2012 RT Systems Inc 28 VX8 and VX8D Programmer Help plus or subtract minus the Offset Frequency from the Receive Frequency when calculating the Transmit Frequency for the memory channel Enter Plus Minus or for the process to recogni
58. w z x v a r a s 2 a ni Mowery de Data Fie Creste Fie for C2828 The resulting file appears in its own tab 2012 RT Systems Inc 1 VX8 and VX8D Programmer Help The file is ready to be sent to the radio TravelPlus is a product of the American Amateur Radio League Any images from TravelPlus included in this help are copyrighted to DHF Systems LLC 19 3 Using the TravelPlus List with existing programmer file You may not want to use all the information from the TravelPlus list in a separate file for your radio You may already have a file to which you want to add only some of the information from the List Using the list from TravelPlus along with a Version 4 RT Systems radio programmer you can copy and paste selected channels from the list to a file for your radio e Begin by creating your list in TravelPlus as detailed in Creating a Listin TravelPlus in this help e Open the programmer e Open the file into which the frequencies are to be inserted O 2012 RT Systems Inc ARRL TravelPlus 109 e Access the TravelPlus list through the link in the file menu Both the list and the file are now open in the programmer Working in reduced screen mode is helpful with this process to let you see both files at one time am n File Edit Communications Settings DStar Window Help D i Bea AE Ae 1C 2820 Untitled T ENE 167 31 Hepevide 1 GEORGA l TE maa 45
59. why struggle to find information for the offset frequency and offset direction for your Excel list when the programmer will complete this information automatically when frequencies are entered there Limitations for use of another commercial spreadsheet program include e The spreadsheet program will know none of the limitations of the radio It will allow you to enter any value in any space You will have to enter transmit and receive frequencies CTCSS tones and DCS codes carefully to be sure they are imported correctly to the radio e You will need to organize your data carefully The Programmer will import all the items from a single column as the same thing This can cause an odd split to be entered as Simplex or a non standard offset to be ignored if non similar data is listed in the same column Let the Programmer help you as you create your original file with its defaults and automatic settings Once the file is created you could export the data for other uses Step 1 The Programmer makes no assumptions about the information being handed to it from the Excel file You need to be familiar with the data in the file to the point you can identify that data to the programmer during the copy process Step 1 Open the Excel file Select and copy the information you want to put into the programmer 2012 RT Systems Inc Copying From an Excel Spreadsheet 205 u Ns Pumy Fwote Genera f EA Norma _ ea PM romansu BZ D
60. will be skipped if there is already information in the channel The data in the existing radio file will not be overwritten Itis always recommended that you import into a new file to prevent data loss in an existing radio file Once the information is in the programmer file it can be copied into an existing file With the copy process you have more control of where the data is inserted into the file Receive Frequency The very least a file must have to be imported is the receive frequency This may be called the output frequency depending on whether you re referring to the radio or the repeater If the column header is Receive Frequency the import process will recognize this label and identify the information automatically e Acceptable receive frequencies are detailed in the User s Manual for the radio In the text file the frequency should be entered in the format MHz decimal kHz i e 146 450 with up to five digits following the decimal e Although unacceptable frequencies can be entered into the text file they will not be imported into the Programmer They will result in a blank memory channel when import is completed Transmit Frequency Enter a specific transmit frequency in the format MHz decimal kHz i e 146 450 with up to five digits following the decimal This information can be omitted from the file e If you are importing repeater information where all the repeaters have standard offsets none operates on
61. work on the radio you will not be able to enter it here 2012 RT Systems Inc z VX8 and VX8D Programmer Help Wis programes vesena JA kuw tie Gat Comnenxescre air Birdow tip oe RE Sei an TereMode C1055 OCS pay So im hn pS OS o ihl AZ BAS A Bah Mre l sina jor elsa e Type in what you want to show on the dislay of the radio when you use this channel if i assess unnpa uirga e Press tab to move to the Tone Mode cell Setting up the tone of 100hz requires TW steps just as it would if you were doing this from the face of the radio Turn on Tone Mode AND then set the 100hz tone WAGES Programmer VES Lrersed3 bhe Edt Conmsmcsera Settings Window tiep Os sRe STE aN cress 008 pty UG DHE mino jor sl u le The program will not let you set the CTCSS tone unless you set the Tone Mode first This keeps you from expecting the CTCSS tone to work without it being turned on _ SX BKIRURSRABERS f 2 f E E H e This channel is ready to use e The other columns are set only if you need them for better radio performance See Regular Memory Channels in this help and the User s Manual for the radio for details on what these features do and the settings O 2012 RT Systems Inc Getting Started 21 for them There is more to this radio than just memory channels So there is more to the programmer Tabs at the bottom of the main screen gi
62. 0 600 tH 147 65500 600 bH 147 66000 600 tH Show Nowe F a r p p P r p x p P r P A oi e All the data of the original file is converted into a new Version 3 file for the FT 60 e Now save this new file so you don t have to do this again every time Also once saved as a new Version 3 file you can use this data for other radios once you have the Version 3 programmer for them Advanced feature explained below From the menu select File then Save as from the list Use the left mouse button to make this selection Fe My Recent Documents Deshtop My Documents My Network Fie pame Osona FTE0 Fie Sore s hoe Rado Data Fdez FT60 e Entera filename in the File name field at the bottom of this screen Use your left mouse button to click Save O 2012 RT Systems Inc 178 VX8 and VX8D Programmer Help Note Only files from the original ADMS 1J for the FT 60 Version 2 programmer can be accessed with the FT 60 Version 3 programmer Files ending in rdf for other Yaesu radios cannot be opened in the FT 60 Version 3 programmer 18 3 2 Opening a V3 or VA file from a different radio The Version 3 programmers have the ability to share memory channel information between radios lt makes o difference if the radios are from the same manufacturer or not As long as both files are from an RT Systems Version 3 programmers they can be used by the Version 3 programmer for any other radio To open
63. 063 5 AH 7 Offset Offset Opera ysl I Offset Drecsos Mode equercy Frequency Diecton DO 145 60000 600 kr ele el 0 447 00000 3 00 MHz Mirus y Frequency C1360000 145 00000 600 the w ARS ejem 139 00000 139 00000 Simpien FN 14400000 14400000 Srgex m 16500000 155 00090 Sargiew PM TEST FR m FN 00300 O 440 51000 500 He 17000000 170 00000 Singiex 17400000 17400000 Serplex 13400000 13400000 Sger ARANA g 450 090 142 00000 142 000 BURDA E Smplex Minas Serplex Serplex Serplex Spex Serpe Sede Smplex Smplex Larger Spex Semple Serpiex Srpk Serplex Smplex Smplex Senpiex Smplex Serplex Smplex Smplex Serplex Sue SURBNREYENEYS Fold 2 su ye oe oly N Memories y LimtMemotios VFI 4 Ready Open the files From the menu at the top of the main screen select Window New Vertical tab group The screen will separate into two parts taking the selected file to the new group To work with three as shown above simple select another file and repeat the process A horizontal split is also possible 2012 RT Systems Inc e VX8 and VX8D Programmer Help FT 99 Programar FT 90 Unti file Edt Communications Settings Window Help Og sone Sets 42 Receive Tarent Oft Det Opes je EE e smpiex elo x sme m 100 0 tr y elh mlO mlie elo s 1200tpr w
64. 12 RT Systems Inc Programming Other Set Menu tems 145 same group is not sent repeatedly EAI Emergency Automatic Identification The Emergency Automatic Identification EAI feature is useful in situations where a person has become incapacitated Voice transmissions are not possible however with this feature properly configured and engaged the radio will respond automatically without having to press any buttons Setup for EAl is detailed in the Emergency Automatic ID section of this Help There are several other details to be addressed along with the two listed here Enable Check to turn the EAI function on Time Set the interval of the emergency signal and the length of time it will be transmitted Emergency Operations The radio has an Emergency feature that must be activated from the face of the radio i e used by someone who is not incapacitated This feature would be helpful for finding someone lost but not incapacitated or for alerting others traveling with you of a danger in your vicinity See Emergency Operations section of this Help Pager The radio includes an Enhanced CTCSS tone encoder decoder and a dedicated microprocessor providing paging and selective calling features This allows you to place a call to a specific station Paging and to receive calls of your choice directed only to you Code Squelch Configure the options here for Answer Back Check the box to have the radio respond automatic
65. 2 a A 2 2 2 SESSSSESESSESSSSSS SSS SSSSSSSSSSSSSESES i Rene mum a 2012 RT Systems Inc Easy Editing in the Grid Column editing will address a selection of consecutive cells all at once or individual cells repeatedly If the items to be changed are not consecutive you can select and paste repeatedly until all the cells are addresses You do not have to copy again The programmer retains the copied value Check Box Cell Editing If you want to put several channels into a Bank there is no reason to do this one row at a time This process varies from the other by how the cells are selected Check box cells act differently than those that contain text You can copy from one check box column into another In this example put channels several into Bank 1 without checking the Bank 1 box for each channel First select Settings from the menu at the top of the page From that menu select Bank Settings Several columns of the screen will be hidden leaving only Receive Frequency Name and Banks This makes working on the screen easier since you no longer must scroll through several columns that you are not using now For Channel 1 put a check in the box under Bank 1 2012 RT Systems Inc as VX8 and VX8D Programmer Help 2 a 5 EJ EJ El ARO At this point you CANNOT copy this field Press Tab or Enter to move out of the field Th
66. 2 RT Systems Inc Emergency Ope rations 81 e CW The Busy LED flashes the message in 5 wom Morse code The message is entered in the Message field of the Emergency section e CW Beep The LED flashes the message in 5 wom Morse Code and simultaneously a loud alarm is sounded e CW ID TX S Transmits the programmed Emergency message Morse Code and flashes the white LED light according to the programmed Emergency message Morse Code on the air beginning one minute after activation of the Emergency function Note The internationally recognized Morse Code SOS message ERE RAN is programmed at the factory for the Emergency message To program the Emergency Message Press MODE key to display previously stored emergency message Press and hold the HM R key for 2 seconds to clear previous message Rotate DIAL knob or press a keyboard key to select the first letter number of message Press MODE key to move to next character If you make a mistake press the BAND key to backspace amp re enter correct character Press 8 hold the HM RV key for 2 seconds to delete all data after the cursor that may have been previously entered stored erroneously When message is complete press MODE key again to confirm message then press the PTT switch to save the settings and exit to normal operation O 2012 RT Systems Inc Enhanced Paging and Coded Squelch s 13 Enhanced Paging and Coded Squelch The radio i
67. 3 of 4 Select a column Then select a header for that column Cick on col n header to select Then selec the column name from the dropdown list To skip 2 column during import set header to ingore trgore T ingore ingore ingore ingo 147 0200 0 6000 147 0400 0 6000 1471000 06000 147 1200 0 6000 1471400 0600 1472400 0 6000 147 2800 0 6000 You need to identify only those columns to be imported 2012 RT Systems Inc Importing a file 225 Import Step 3 of 4 All those to be imported are identified Chek ss ss Seeder to select The sena the solu maim thc the dropdown tst To skip a olum durin import se heat gu Rece Os 08s Ton ignore Tx E 1273 147 0200 0 6000 147 0400 0 600 147 1000 0 5000 147 1200 0 6000 147 1400 0 6000 147 2400 0 6000 147 2800 0 6000 lt Click Next to continue 21 5 Import Step 4 Import Step 4 of 4 Limit the channels that are imported by the Programmer Again you can make adjustments to the data to be imported without having to edit the original file Select all or any part of the list by checking the box at the left of the screen Import Step 4 of 4 Sating rado memory fo a a 301 An uncheked Toll Cy le 900 selection is not anne imported Channels Selec 51 Deodiect AI Recetis Frequency Ofset Frequency Offset Dieecton Tone Mode Igno kra 147 0200 0 6000 gt H o p aa aco
68. 44 148 MHz ORIO RONTOCHERT Fayta 1146 6409 ueso 0 CA eux 194 298 mz MOMTGONERT 246 0200 laara c CAje 1144 18 mae U Ea MTGCHERT fayta i46 9100 eBook occie 144 145 EMz O PONTOORERT 146 9400 w552 ce 100 0 144 140 me onto WONTOOHERT Payee 347 3960 lepese c Cais 144 108 Ne o PONTOORERT 5 147 3400 Ivastiz oiche 77 0 450 450 miz ono RMTSOHERT 14430000 jamy jo 400 450 mie onio WON TOCHENT Peyte 14421000 ICO 1420 4530 mz Tonto MOMTGONERT f 1443 0000 wansuc o CAjaz 420 450 He jours BONTOOMERT 443 0800 Neer jo 2 420 450 EMz o PONTCONERT 443 5000 zpos e j 480 450 MHz i oaro WONTOOHERT Fayta 448 6000 Wik jor 420 450 Bitz ROMTOOMERT 3 4 sasse lo 123 0 5 480 450 miz M onio ONTOOHERT avto 448 7780 wan lo 131 9 420 450 Mite OHIO DONTOMERT 444 0500 FASIGS el 100 0 450 450 Mz WONTGOHERY 1444 2500 f CE e 420 450 Mite TO MONTOCHENT o 444 7435 watt icare 7T 0 lazo 450 mz tono MONTGOMERY f ea3 S250 lara occa o 420 450 Bie oaro RON TOOMERT 448 9980 vere lo 194 148 Ez ROUTCORERT 146 9059 ZABFGI ol 100 0 144 148 miz oaio WNTOSHERT rar ter 1147 0750 Wake oe lazo 450 mz lomo POMTOMERT Fettecing 444 6425 lasow leccaje 420 450 wie joao RONTOOHERT W Carrolito 437 6500 Neza lo a20 490 me lomo POMTOOMERT F Careolito 444 8000 lza ooele caracas Check the list If you don t like the results try again Once
69. Aea Aaneren a naaar aaiaaiak 2 Radio Menu Settings ARTS OW EAL cccccccceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeseeeeeeeeeeeeeeeeneees 143 Auto Range Transponder System ARTS ccsscesseceeseeceseeeeeseeeesneeesaaeeeseeeesaesasaaeeeseeeesaeeesaeeeeseeeeseeeeesaeens 143 CW Learning training esasi ienai in aaaea anaa odes ss taveuecaavecccsdevsusdineveesesvenvetsdgntetdeccensiesuvecdevessSiventsatcedees 143 EAT Emergency AUtom atic ID iscsscccsssscinscicecsessecctasscevescesnesesazscesensttnassencstsevetevsvsssioteacecsetsocssssceceasterneieeapec seteai 145 Emergency Operations Setup ccoocccconccinnnccnnnnccnnnncnnnncnnnn creer 145 Pager a Na in 145 3 Radio Menu Settings Messages comic iii id 146 Messages In De tall iii rica 147 4 Radio Menu Settings SOUNOS oonccccconnncccnnnoccnnnnnnnncnnnnnnnnnnonnnrnnnnnnnrr rra nnrrnrn rra 148 Band Edge Bee p siisesvesescssessiveavcaveivecesscsvesveusucceavssvenneaveceveskervesveusetavastivssce caveveckessesceupeccdassevesseavedcetsoneevsiveigeineesin Beep Level iii a A E TE Beep MOdG cicicessisisecs ssecesentecesncevciccsdeteviessecsicesacve sconce vesvcsechi silgsveigitcedesiadasnvevsddcbesitviesseapaesvasbussessevderdesdh il atea CT CSSIDCS Bell Saeed sueedecseVinvatviavectseretveacdiyentensetaaaveube FM Speaker Output A O A A SQUE CA iia A A A A anda Us r Beep Melody iio iii AAA A AAA IAEA AAA O 2012 RT Systems Inc User Beep Select id 149 V
70. C COTTON RN Nam l 0 Io azo Ps a i673 Hopewle GEORG 0 E 14525000 2 14529000 wae 835 Allanta GEORGIA 885 CA 145 35000 3 1453000 WADOC A amp L Allanta GEORGIA 01452 145 41000 4 145 41000 WEPME 100 Allante GEORGIA 100 06 146 62500 los 1256250 WET 100 0 gt GEORGIA 100 0 146 64000 ls 14561000 we4aGA Alania GEORGIA ot 146 65500 loz 1660 NANFP I4 Alanta tay o151 42eR8 146 73000 Mis 146 73000 KOANC Alana GEORGY a 146 82000 os 126 62000 wane 1652 Allante GEORGIA 45 2ICAje 146 97000 10 146 3700 acs Alanta GEORGIA ot 147 00000 fff ir 147 00000 WAANNO Alania GEORGIA ICA 147 03000 iy 12 147 03000 WANJO Allanta GEORGIA o PO gt Mis 1472500 KEZE Allani GEORGA oa 147 3450 Notice the two tabs The radio file and the Ira 147 34500 NANO 1514 llanta GEORGIA o151 4 CAJAB 147 10500 a z as I 15 147 10500 us WBLATH 107 2 Alanta CARES GEORGIA 01072 421 25000 ravel Plus List are clearly identified ll 16 421 25000 434 0000 Sor WEZTL Allanta GEORGIA o 440 60000 I i7 eosoon0 Pue waDOC Alana GEORGIA 1 442 00500 Ilf 18 442 00500 Pius WECML 1273 Allanta GEORGIA 01273 48212500 Iff 19 482 12500 Plus wet 1000 llanta GEORGIA 100 00 442 22500 o 442 2250 Pus WBSEGI 100 Manta GEORGIA 442 47500 Mia 44247500 Prs NAR 723 Allanta GEORGIA 0723 442 52500 2 44252500 Pus N4XOM nas Alanta GEORGIA 01109 442 67500 Iff 23 4267500 Pius KESPVE 1000 Allante GEORGIA 2101081 44280000 E Pus 05 Allanta GEORGIA ofl 442 87500 25 44287500 Pus KAREL 1000 Allanta
71. D OEN e neve or 2 wasi nson inges a o 2 ueo a rra or 3 mss nisme inper amo o EZ wsew ve of MO MSPS MLSS Snopes aw on DIARIO y gt mara on 3 MISION 14 55000 fe a on Rw y mu rara or BD MIS uies Seen ao on 2s seo 1454 cer or 27 MASIS S790 Sngex as on E m pare on ao mw Ma Spes A on Y ammo e m rara on 2 maoo 14140000 Singes a on 2 10700 107 none on D monn meme mga at on DTO e rere or nO mao nese Snes a on e MOPE y m nare or n wom uera minges At o 2 mamo m nore ES 3 mowo mewe inger ato o n us m nore of MO AA 14266258 rie te on EJ a rere on 3 MTO MIGO one a A A aw y Spe rra of 35 saasa 14348754 Snp to on 3s 14840000 14580000 Sree m sera ow FANGO 141 000 Sopes aw on A Mino ano Swe PA SPE pane or BO a HRA mpe ae of 7 RAO ARKO sye m e Nre ot DO MATIS 14172800 Empero on Mpo 158990 Spes SOE ne or a mm me wen amw on IO 1ADASO0O 149 89000 Soes m sme me on 4 AARO 143 7500 Snes ao on ener 1 20200 Sree m PL npe on L MIN ML AS on AL MAISO MOSKO mpe m mer noe of sar irre one aso o 4 MAN 107 inges a on a M220000 14380000 inper a o ms misse rien to on ate 2 MAD mawe Sapes meo ort am a maa Wr mpe ao o am a 14359000 143 4500 Snpes ass on an O wo mans mes we amo on am HASO 1457900 ES on p3 so ms nasere mga as ott s SO moo 143 8008 Sopes amo on x nos 9 ml Mamones y Lint Memories VIO Merve mos r n hard Menores y fard lant Bod Mercees Gerdb une WOA WOS Ca al Rena s num sa
72. DIMMS pane EEn EASA EEA E ATE NEEE A AAEE AEAEE EEE EEE AS 136 2012 RT Systems Inc 6 VX8 and VX8D Programmer Help LOCKIL OCK MOG isc ta MEM Fast Ste pi ssscs scsvessccavesceveaveavsavececsisvesceusecednscvssscavedceveshesustveusatevascivssncavcuvevessessetdeupeddeousavsccausicedeskeesstvetsutevesiey Memory Protection Memory Scan Mode Memory Write iii A AAA A E Mic Gain ai Aa MAA did EE AAA E AN Priority Ro Ve DE e aa aa AA A An Priority TIMO ci AAA AAA AAA AAA Programmable Key Assignments cmccconncconnccconncnnnncnncnccnnn cnn 139 PIT Delay oicocicncricnnnosicanoconionncaaciccnininns RX AF Dual Triple Watch R Save ii dadas Scan aim o EEA E A A E Sca Restart TIME ii e ia desd Scan Resume Mode Sens r A A A A A AAA Set Mode CUISINE Set MOde FOrM ates cececcciesdeiesvcetenccsdstestcspecvssavevensceuceveivececunshesseiccadesentevuseredecsesdneresseevscavesesterucesuvccesbastdesedvecs anse SM art Se ar Ch ii A A Aia S Meter Symbol SUE AA a E E E A ii E Split TONG lt o a a a aida TOM POV aAtuee 2 A AAA E AAA Time Qut TIMET ii A AAA MMS OO RN Tone Search M Ute svecevcsssscacssesescecesdevsencssecnivesscevsssvsecercectcessieeseteivedencudesesousdeetiedsstessectiveseesudesussuceuscesussteevecenesdented DICTAMEN A A E AAA VFO Mode VEO Scan Mode ii ios VOL Ke y Koe I civic is Adenda dadas eicad nda O NN VOX Delay iii A A AAA Wave Monitor Weather Alert AA e E CO aaa aKa aa daaa aaa Aaaa
73. E Those checked o 2 1090 0 6000 ere imported 1471200 90K 7 147 1400 0 6000 gt RA 1147 2400 NENA lt e rem _ es Since the data can be imported into an existing file use the boxes at the top of the screen to place the data in the file where you want it to appear e Starting radio memory Insert the channels into the file somewhere other 2012 RT Systems Inc 226 VX8 and VX8D Programmer Help than at the beginning i e At the end of a list that has the last channel of 21 Enter 22 in this box to begin with the next memory channel of that file e Overwrite existing channels Tells the process to replace data it finds in the existing file or to skip that data and write in the next available channel For example e Unchecked If you import into a file with memories in channel numbers 1 10 12 15 and 16 the process would write the imported channels in order to 11 13 14 then 17 on to the end of the imported list e Checked If you import to a file with memories in channel numbers 1 10 12 15 and 16 the process would write the imported channels in order beginning at channel 1and continue in order to the end of the imported list The existing channel data of the file would be lost in the process as it is replaced with that of the imported file e Finish Click to compete the process The resulting file in this example would look like this Resutry tte when Saning rado menor Wak wet to
74. EO A7 EE MRR eacee 7A 28 Condena Fama Good Cipbans LJ Fort 5 Argent a Marber la 7 3 EN MAD mM Sheets Sheet Sheets Meaty Averege 26 209070 Carei eee EUS DE o 20 2 Step 2 Open the Programmer to which the data is to be pasted It is recommend that you import into a new file to prevent loss of data from an existing file Channel information can be copied to an existing file and put exactly where you want it after the process of copying from Excel is complete 2012 RT Systems Inc 206 VX8 and VX8D Programmer Help Note The FT 60 is used here as an example The process works the same for any RT Systems Version 4 programmer although column names may differ or not be available Pie bst Commurvcsticns Sette Window Hip Os Ame Svs at Bri ori Prii Bots F PAP ja A 6 f anO bles ele eee clea cies a COCINA CIC le DEE Pees se se sib k nooo g Kwo la la f i r a El a al A r P jal Pi a E A a f a rm A 5 El la ial a f a a Al l a Pi o li a al a a a a a a ri a a al 6 PSS ESS SES SS SES SE SES FES ES FES EES SS EE EEE le Se eee Bele ee eS z AAA on gOINGNIGOI RC RInOINISRIGO 03d 00000 EGO Roo acia tee cise a Goons feces es SOON RS nn aS non en ers sanan sic rare gg 20 3 Step 3 Paste Ctrl V or right click and select Paste or select Edit then Paste from the menu at th
75. Inc CT CSS OO 109 DCS COAE ii A dad 110 DOS Polarity siicicsccvecdicesiccestcvcenessoussecaecesscsecccevsectevssusecousevsostevscecessessedbiveensecouerteceredsondcecevdestevsenneceidvestyevsoucesvevsesten 110 DCS Code Inversion Polarity 0 cccccccccceeeeeeseeceeseeceeeeeeeeeeeeaeesaeeeeaeecesaeeeeaeeseaaeseeaeeseaeeeeaeeseeeeseeessieeeeeseees 113 Entering Split Pat iii A ic 115 Half Deviation INGERMEE da Mask A A a datada Name AA ita Nonstandard Offset sisccsssiscsssseisicccessescescevseccsestaveessaveccecsotesvesveusutevasciveusseveuvecesticvesceusticeantivessaveddevestesvetsetsnieventey 116 Offs CL Dire Ci E E 117 Offset Fe QUENCY iii A AE Aaa 116 Ope rating Mode icon ii AIR AENA AAA AAA 117 Receive Fre QUENCY rmivicsiriii A Ad AA aiii 115 Sim ple Mode can A E N E E A S Meter Sq e leh A AAA AAA 122 Step A A A A AAA 121 MOMS M Ode iii aoadaids 118 Transmit Frequency svicessscscisesesctcesccisensssecnivesscesscseseccecssecessiersecs cedeedeseseseucedetcstssactsecsdesecsuscauseucevacechsstersecs dedenses 115 TX POW ON A A A A AA User CTCSS sifu Ze SKIP Memories oo dial daa 3 Limit Memorie S on iapa aaae ide era 4 ElA and Weather Memories ci ia 124 5 VFO MGM OMe Siar idre ana sac acievtas ccgece a dee 125 6 Home Channels Memorie S siene oea eaaa dc e 126 7 Marine and SW Memories occoonccccnnconnncnonnccnonnnonnnennnnnnnnnrnnnnernnnnnnnnrrnnnnrrnnnrrnnnernnnnrrnnerenanes 127 Part XVI Programm
76. MOlUM es a euepecey tenes Ea aa TAa aAa Eaa aa aopa anias 149 5 Radio Menu Settings DTMF InterMet oo ooooonnnccconnnnccnnnnnnnnnnnnnncnnonnnncnnnnnnnrr nro nnnrrrrnnnrnnnnn 149 6 Radio Menu Settings VFO and Menu SKip cccceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeneees 151 7 Radio Menu Settings VX 8 APRS GPS ccceceseeeee cess seen eeeeeeee ee eeeeeeeeeeeeeeeeeeeeeeeeeeeneees 151 8 Radio menu Settings VX 8D APRS Beacon cccceceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeseeeeeeeeeeeeseneees 154 Part XVII Radio Computer Data Transfer 158 1 Communications Get Data From RadiO ccccooonnncccnnncnicnnnnanonnnnnanonnnnnnnnnnnnnnrnnnnnnnrrnrnnnnnnnnns 158 2 Communications Send Data To Radio cccecccceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeseeeeeeeeeeeeeeesenees 161 3 Comport SetUD ioiinconriin ii a ii 165 4 Radio to Computer CabliNg lt lt ooo 166 Part XVIII File Maintenance 168 Eile A eevee coy shade ce de AEA ASA ui oucovenbdcceseedaceduvsheccayeuteteevssideceseedatedyeatideayeds 169 File PNE Wn eanga A vivecsnddvecaccevineesscasseddceyeeestadvey 169 Fil OPEN iii id 171 Opening files from older programmers cceccseeeeeseeeeseeeeeeeeseeeseeeeeesseeeeesseneseesseneseesseesseeeseaseneseesaeeesenenenseaee 171 Opening a V3 or VA file from a different radio oooococnccconncnonnnnnnnncnnscnnnncncnnnrc nana anne 178 Opening a VO VA File ici AA AAA ii 181 File PPM Oia 185 File Print Pr
77. RERRIAARIIZI ozone CON GU 470 Me 670m erone 670r Eron EITA 670m eme CA HA FEIIET 8 5 atenaseuus ia J You can make this process even easier by splitting the screen into two parts Select Window New Vertical Tab Group for this result 2012 RT Systems Inc a VX8 and VX8D Programmer Help fee tor Commons Settings Diar Window Me DASH DA SOAN Y cos mamie x 1 143 2000 14325000 Lejsepen eae aE Moe 0 005r fs sjo he 2 HRI Has Sapes am ae Nine o 1 143 37500 Sree SPPE hare or JO HAIWI HITRA spe ae Ser Mara o 2 Awe 00 Sree m writ npe ye 4 izes 1412879 Snpes as ane Mare on 5 mowo aawo Sge SPE ne on 3 Mawon 13 0000 Spex am se mre on 19341200 1341200 ne m se pare on 6 HORA NORA Snes aa E on wherwe 410300 Se m AMO rane or 7 mum MLN mge a on wom aan Iges m Down e or e MI 10337 De aso on NES m caro ee or 9 mma 14125000 Enges aeo on 2 man y mu ema on EEE mpe kt o gt wero Y oxo nre of 11 masso 143 37506 Singer ato on wO ba y Pa nore oF 2 HIM 1207 Soper a of iE MOKO p m nara m oF D iao Lame Spe ao of 1 16050 15125 nara of MO Was Wee Snpes Ato on 13 14159500 aa nere on 15 MAISO 193 43904 wwe am on 19 1953250 pare or Mae Haare Ste Ato on 15 143sso00 pass nare or i7 meo maae inge ass on Me aseo n nore or M omas mame snper ao on Po anyo Los m mne or no mom uone Enges aso on w wim y m none on a wem men mga at oF 13 eono n nove or z maso 143 50008 Singes te on D MUN
78. S system was first introduced in the commercial LMR Land Mobile Radio service where it is now in widespread use DCS is sometime referred to by its different proprietary names such as DPL Digital Private Line a registered trademark of Motorola Inc DCS uses a codeword consisting of a 23 bit frame transmitted subaudible at a data rate of 134 4 bps bit sec Occasionally signal inversion can result in the complement of a code being sent or received This prevents the receiver s squelch from opening with DCS enabled since the decoded bit sequence would not match that selected for the channel 2012 RT Systems Inc ma VX8 and VX8D Programmer Help Typical situations that might cause inversion to occur are e Connection of an external receiver preamplifier e Operating through a repeater e Connection of an external linear amplifier Note that code inversion does not mean that any of the above listed equipment is defective In certain amplifier configurations the output signal phase is inverted from the input Small signal or power amplifiers having an odd number 1 3 5 etc of amplification stages may result in inversion of a transmitted or received DCS code While under most circumstances this should not occur amplifier designs and industry standards take this into account if you find that your receiver squelch does not open when both you and the other station are using a common DCS code you OR the other st
79. SS column becomes available Select the tone frequency from those in the list The value must be in the list With Tone selected as the Tone Mode the value that appears in the DCS code column is ignored by the radio TSal CTCSS tone squelch is activated for both transmission and reception only signals encoded with the matching tone will open the squelch Your radio will remain silent otherwise When this option is selected the CTCSS column becomes available Select the tone frequency from those in the list The value must be in the list The radio uses the frequency set in the CTCSS Tone column for both Encode and Decode transmission and reception With TSql selected as the Tone Mode the value that appears in the DCS code column is ignored by the radio DCS Digital Coded Squelch mode is activated for transmission and reception When this option is selected the DCS column becomes available Select the code from those in the list The value must be in the list The radio uses the DCS Code for both transmissions and reception With DCS selected as the Tone Mode the value that appears in the CTCSS tone column is ignored by the radio Rev CTCSS Rev Tone Activates the reverse CTCSS Decoder which mutes the receiver when a matching CTCSS tone is heard When this option is selected the CTCSS column becomes available Select the tone 2012 RT Systems Inc Programming Memory Channels 109 frequency from those in the list The va
80. Set and Forget plan Once the global settings are configured to your liking and saved you do not have to repeat this process This configuration does not change with a new memory channel file The last settings file saved is the one that will be used when a memory file is sent to the radio You can save several different settings files i e one for your radio and a different one for your son s radio Then easily match the settings to the radio being programmed without having to make changes in the file repeatedly e Keep menu settings and frequencies in a single file option This option is set on the Settings Preferences screen With this option selected the Radio Menu Settings as assigned on the Settings Radio Menu Settings screen are assigned ONLY in this file With each new file created the Radio Menu Settings return to factory defaults 2012 RT Systems Inc Using the Programmer Overview 31 You have the ability to customize the global settings just as you customize the memory channel file This would be useful if you are programming each radio uniquely No guesswork about what the configuration of the global settings Once they are set they stay set in this file until you make a change to them O 2012 RT Systems Inc Viewing and Changing Programming Files 33 5 Viewing and Changing Programming Files The Programmer begins in a screen displaying memory channel information for the radio Default inf
81. Simple Mode from the menu While in Simple Mode 2012 RT Systems Inc Programming Memory Channels 105 you cannot access the Preferences screen The Programmer controls what columns are hidden while in this mode Details to be entered for Memory Channels Receive Frequency Enter a receive frequency for the memory channel Acceptable frequencies are detailed in the User s Manual for the radio e Unacceptable frequencies cannot be entered into the Programmer Cellular frequencies are blocked e Memory channels can store any acceptable frequency in any order i e UHF can follow VHF or any other band order e The first memory channel must be programmed e While memory channels can be entered in any order the sub band receives on fewer bands than does the main band Realize that memory channels containing frequencies outside the range of the sub band will not be displayed there as they will be on the main band The radio will simple skip over that memory channel when tuning in memory mode or scanning on the sub band Transmit Frequency Enter a specific transmit frequency or let the Programmer calculate this frequency based on the offset This field is always available however the transmit frequency for an odd split is the only value that must be manually entered Acceptable transmit frequencies are 144 148 MHz and 430 450 MHz Note In the Programmer you can enter details for frequencies outside the transmission abi
82. VX8 and VX8D Programmer Help 2012 RT Systems Inc we Commer GQ idea 6 t at ih b O y ie A mie a iye ston o see de cee on se a a ive Hin oe seu ls mer o ce su 4 al we iye wan ve su 4 we ya Siam wie ce se u4 mot iwe isin o i ls mne e nom ite s oe ru m mm we ut se u r wo e ke ser a 57 MO lane z set 4 gt o e o sm w 4 mmer ee pe pal mor ew a 4 Las aa a E m es lee o i 4 6 E nus mnt oe s t s J se MS lee tin We feo o s M lee ee su 4 Meste gt A h oA Se u Cannon Mc satrga TM and manat R auc tye ce set a mra e w 2 F had Pagasta Lach Mode fame E e sn Bart Cyr Bone Kapr et gt Afon se tee Ja su 4 Pon Carros eet Mo E R lee 1 We To DES Revene re ponams ma ye T uu 4 sos me ce A Pret ere inten moe me iie thin oe seu See Tore z te en mee ee su 4 Z tere teach hse zj AAA ws mo nta se se 4 ete Met Tapara aC e man min o sm 4 r ri m e s gt ARA ad sen Ate Pome OF jneOe tne sen k o Fr gt m m tee Jane Seah Fasion tas Y i YO Sean nim da on a Er Mater aber brea kesis panal VX8 and VX8D Programmer Help by RT Systems Inc The Programmer is designed to give you the ease and convenience of programming the memories and options of the radio from your PC Using the Programmer you can crea
83. While in Simple Mode you cannot access the Preferences screen Settings Preferences The columns that are hidden in Simple mode are predetermined by the programmer All columns are visible on the screen when you are no longer in Simple Mode If you want to hide other columns you can do that through individual selection on the Settings Preferences page Find Ctrl F Finds specific text in a specified column Once you select this command or press Ctrl F a screen opens into which you enter the text or number to be found 2012 RT Systems Inc 52 VX8 and VX8D Programmer Help Look in Receive Frequency Me Cancel Find text pedi Select the field to be searched i e Receive frequency Transmit frequency etc Enter the text or numbers to be found Click OK to move to the first item found The search always begins at the top of the list and stops at the end Find Next F3 Use the F3 function key to repeat the specified find and move to the next item For example You choose to search for 145 in the Receive Frequency column in a file with 5 channels beginning with 145 OK in the Find box takes you to the first one F3 takes you to the second then the third then the fourth and so on until you have stopped at each of those that match the criteria Goto Channel Ctrl G Moves to the indicated channel number When this option is selected a screen opens into which you enter the channel number Enter the n
84. able This option is for programming Yaesu radios only as Icom radios work only with Plus Dup and Minus Dup offsets See the discussion of Non standard offsets inthe Programmer Main Window section of this help for a complete explanation Disable CTCSS DCS and other Tone columns according to the Tone Mode selection Beginning in the Version 3 programmer and continuing into future versions the programmers have been designed to help you enter information for tones used for repeater access You cannot enter a tone unless you have selected a Tone Mode which tells the radio to use that tone The tone value columns are disabled until you turn the tone on Then only the appropriate column is made active When this option in unchecked you will be able to adjust the tone value even if the Tone Mode has not been set for that memory channel Offset Frequency Defaults Defaults are set for US radios Others are presented to make data entry easier in other countries where those defaults are different 2012 RT Systems Inc Split Screen for Multiple Files 63 8 Split Screen for Multiple Files The Version 4 programmer can display more than one file simultaneously in the programmer s main window Opening several files at once makes it even easier to copy and paste between them even files for different radios from different manufacturers or just to compare the frequency lists file fde Communications Settings Window Help Osa
85. able for programming Access Settings Radio Menu Settings Make necessary changes Save the Settings file for the new radio Suggestion Name the file in a way that you know in the future that it is for a D radio This information in the filename may come in handy Execute Communications Send Data To radio These two files work together to program your D radio Create other memory channel files and other settings files as needed for your activities Suppose you have a new D radio in addition to your original VX 8 radio Close the file that opens with the Programmer Create a new file File New Execute Communications Get Data From radio with the D radio Re open the original file Execute Communications Send Data To for the D radio If you use options from the Settings menu access Settings Radio Menu Settings Make necessary changes Save the Settings file for the new radio Suggestion Name this settings file something different from what you named the original settings file if nothing else put a D at the end of the file name Now these two files will work together to program your D radio Execute Communications Send Data To for the D radio When later you want to reprogram your original VX 8 radio Close all programming files saving as necessary Create a new file File New O 2012 RT Systems Inc VX 8 and VX 8D Comparison 13 Execute Communications Get Data From radio with your ori
86. activity You need to know how to change between the Types from the face of the radio Then you can experiment with the three sets of values while in the field to find those that work best for you To make you selection access the APRS GPS menu select item 24 select Type 1 2 or 3 Exit the menu and resume your activities Units Control how received data is displayed on your radio e Altimeter Set to feet or meters e Distance Set to mile or kilometer e Position Set to MM MM or MM SS 2012 RT Systems Inc 156 VX8 and VX8D Programmer Help e Speed Set to kmph knot or mph e Temperature Set to Farenheit or Celcius e Rain Set to mm or inch e Wind Setto m s or mph O 2012 RT Systems Inc 158 VX8 and VX8D Programmer Help 17 17 1 Radio Computer Data Transfer Data flow two ways from the computer to the radio or from the radio to the computer Even when you are sending a file to the radio some data must be sent from the radio to the computer to ensure that the two are talking before transfer of the file ever gets started In all cases be sure to follow the directions presented on the screen carefully The wrong button press can result in a communications failure Details for this process are contained in these sections Communications Get Data From Always the best place to start Even if there is nothing in your radio It gets the data flowing between the two Communi
87. adio the APRS GPS information is accessed when you press the Menu button briefly The first screen that appears is current information coming from the FGPS 2 unit If that unit is not attached these fields will be blank The fields that you are setting in the Programmer are accessed in the APRS menu on the radio That menu is found by pressing the Menu button briefly then once in the APRS GPS screen press and hold the Menu button until the APRS GPS menu becomes available This menu is easily identified by the APRS or GPS that is included with the label for each of the items 16 8 Radio menu Settings VX 8D APRS Beacon The Programmer handles additional information for APRS beaconing on this screen Items to be set include Beacon Filter Select the specific types of APRS beacon to be received or rejected Check to receive Uncheck to reject Beacon Interval The length of time between beacon transmissions when beacons are being transmitted automatically Beacon Ringer Enable disable the audible sound heard when an APRS Beacon is received Beacon Status Text Enter a message for APRS beacon Select one to be transmitted The first text message is transmitted by default Beacon TX Control beacon transmission e Auto The radio transmits the APRS beacon automatically at the time interval set in the Beacon Interval option e Manual The APRS beacon is transmitted only when the 82 key is 2012 RT Systems Inc
88. ains all the options for this feature This tab appears in the Settings file only when working with a D radio e Smart Beacon setting in with Manual and Auto of Beacon Tx e Settings for options of three types of Smart Beaconing e Digi Path Now 2 paths instead of one e My Symbols Four choices to set for use e My Position Additional option of GPS e TX delay More choices for the duration of the delay e Tx Message Two additional Now 7 rather than 5 in the original version e Msg Flash Three options for different messages This one is undocumented in the User s Manual but is very apparent when the option is accessed in the set mode 2012 RT Systems Inc 16 VX8 and VX8D Programmer Help 2 What Is the Radio Programmer The Programmer is designed to give you the ease and convenience of programming the memories and options of the radio from your PC Using the Programmer you can create separate files for unique applications such as travel emergency activities or special events These files can contain different settings such as memories power management features and DTMF numbers for each purpose These files are saved separately to be sent to the radio at any time One file can be sent to the radio at any one time Be sure to put everything you want into each file as you build it The Programmer also gives you the ability to read a configuration from the radio The configuration would be stored ina f
89. ally to the received call Receive Codes The pair of tones that must be received before you can hear a signal while you are using Paging Transmit Codes The pair of tones that are transmitted with your signal so that others engaged in Paging can receive and hear your signal Setup for the Paging functionality are detailed in the Enhanced Paging and Coded Squelch section of this Help There are several other details to be addressed along 2012 RT Systems Inc 146 VX8 and VX8D Programmer Help with those listed here 16 3 Radio Menu Settings Messages Open Message Type Select an option for the initial display of the radio at power on Off There is no initial display The radio comes on ready to use DC Voltage available to the radio is displayed beneath the Vertex Standard logo Message Text of up to 13 characters is displayed beneath the Vertex Standard Logo Enter those characters in the Text field of this section Normal Yaesu is displayed beneath the Vertex Standard logo Text Enter up to 13 characters to be displayed when Message type is engaged Text Messages The radio provides a message feature which sends a text message up to 16 characters instead of sending a voice transmission This part of the Help covers briefly the details of what is to be entered for the fields More details on this feature can be found in Messages In Detail section of this Help Message Member List Enter a
90. alue is not available in other modes e 5 kHz not available in 250 300 MHz range or above 580 MHz Mask A masked channel is not available for use either during scanning or when the radio is tuned manually in memory mode Masking a channel hides it until you unmask it from the face of the radio or by sending a file with this option unchecked Only then will it be available for use This is a good way to prevent another user from accidentally accessing a channel or to store memories for another area that are used only when you visit that place Attenuator Check to enable the front end attenuator that will reduce received signals and noise in an attempt to make reception better in a noisy setting With this option On weaker signals may not be heard The options are On checked and Off unchecked The default is Off This is normally a global option in Yaesu radios This is the first of 2012 RT Systems Inc 112 VX8 and VX8D Programmer Help the radios that allows you to control attenuation for each memory channel giving you more control for operations on each channel Internet Enables disables connection into the Vertex Standard WIRES Wide Coverage Internet Repeater Enhancement System network See the Radio Menu Settings DTMF Internet section of this Help for more details S Meter Squelch Adjust the RF Squelch threshold level As the squelch level increases weaker signals are not heard and incoming noise is elimin
91. ammed This is a normal mode for the radio Press the key on the face of the radio as described in the User s Manual for the radio to put the radio into Memory mode and see what you programmed Hardware Requirements Hardware requirements for the Version 4 Programmers include 2012 RT Systems Inc z VX8 and VX8D Programmer Help e A PC running Microsoft Windows XP Vista or Windows 7 The Version 4 RT Systems software will not work on Windows 98 2000 ME or NT e Version 4 An open USB port or the RTS 03 USB to serial adapter to work with an original RT Systems 9 pin serial cable Note The Version 4 programmers will not recognize any other cable or USB adapter They will not work through a serial port e The correct computer interface cable as shown in the Radio to Computer Cabling section of this help O 2012 RT Systems Inc z VX8 and VX8D Programmer Help 4 Using the Programmer Overview The Programmer is designed to be used in conjunction with the manual for the radio The Programmer provides easy feature configuration while the written manual provides an explanation of a feature and its use Working with Programming Files The radio Programmer has the ability to work on more than one file at a time These can be files for the same radio or for different radios even radios from different manufacturers You can copy and paste frequencies from one file to another This added feature makes
92. an odd split the import process will calculate the Transmit Frequency from other information in the file This information must be included in a separate column for an odd split e The column cab be empty other than the specific information for those few odd split repeaters The import process will calculate the Transmit Frequency from other information in the file for the other channels e Acceptable transmit frequencies are detailed in the manual for your radio O 2012 RT Systems Inc Importing a file 217 Note In the Programmer you can enter details for frequencies outside the transmission abilities of the radio however the software will not enable transmission on these frequencies Transmission will be possible only if the radio has been properly modified Offset Frequency This is the amount that the Receive Frequency changes to produce the Transmit Frequency Standard offsets in the programmer include 100 500 and 600 kHz 0 1 0 5 and 0 6 MHz and 1 0 1 6 3 0 5 0 and 7 6 MHz e In Yaesu radios any value in 50 kHz increments can be used as an offset i e 650 550 050 e In an Icom radio there are no Splits Everything must be entered with an exact Offset Frequency e The Offset Frequency is used by the radio along with the Offset Direction to calculate the Transmit Frequency The Programmer does the same e This is one place that the import process will make an assumption for you It uses 600 kHz for
93. ansmitted to identify this radio Enter the callsign and check Enable to activate its use by the radio When using ARTS this must be a callsign for legal operations If this is used for EAl in emergency situations other identifying information may be more helpful 2012 RT Systems Inc Emergency Automatic ID 11 Emergency Automatic ID The Emergency Automatic ID EAI feature can be used for searching for persons who are incapacitated Search and rescue personnel who may have become injured ina debris field would especially benefit from this feature With EAI enabled the radio of the incapacitated person will respond automatically when a unique CTCSS tone pair is received The others of the group can perform direction finding on this signal to locate the person The callsign of the incapacitated person will also be transmitted if these options have been set for this feature The EAI feature requires several steps for setup These include 1 Storing the desired frequency into the EAl Memory Channel 2 Setting up the CTCSS Tone Pair into the Receiving Pager Memory 3 Entering the callsign name or other identifying information into the CW ID 4 Setting the response interval Details are included here for setting up each of these from the Programmer 1 Storing the desired frequency into EAl Memory Channel e On the main screen of the Programmer select the EAI tab from those at the bottom of the screen e Enter the details
94. any if not most repeater operations When this option is selected the CTCSS column becomes available Select the tone frequency from those in the list The value must be in the list With Tone selected as the Tone Mode the value that appears in the DCS code column is ignored by the radio TSql CTCSS tone squelch is activated for both transmission and reception only signals encoded with the matching tone will open the squelch Your radio will remain silent otherwise When this option is selected the CTCSS column becomes available Select the tone frequency from those in the list The value must be in the list The radio uses the frequency set in the CTCSS Tone column for both Encode and Decode transmission and reception With TSql selected as the Tone Mode the value that appears in the DCS code column is ignored by the radio DCS Digital Coded Squelch mode is activated for transmission and reception When this option is selected the DCS column becomes available Select the code from those in the list The value must be in the list The radio uses the DCS Code for both transmissions and reception With DCS selected as the Tone Mode the value that appears in the CTCSS tone column is ignored by the radio Rev CTCSS Rev Tone Activates the reverse CTCSS Decoder which mutes the receiver when a matching CTCSS tone is heard When this option is selected the CTCSS column becomes available Select the tone frequency from those in the list
95. any memory channel Those remaining include Receive Frequency A channel cannot be programmed without a receive frequency This is the frequency you listen to Transmit Frequency The programmer will complete this automatically The column is included in case you need to enter the value other than the default for the receive frequency based on the band plan i e an odd split pair Offset Direction Again the programmer will complete this automatically based on the band plan for the receive frequency However an occasional repeater will differ from the band plan Including this column gives you the ability to address that difference Name This column is for personalized information to identify the channel Tone Mode The repeater operator controls this detail for the repeater There is nothing standard that can be completed automatically You need 2012 RT Systems Inc Easy Editing in the Grid 51 to select the Tone Mode then assign the CTCSS frequency or DCS code as needed for a particular repeater Skip Use at your discretion to include or exclude a frequency during memory channel scanning Comment Personalized notes up to 80 characters This information remains a part of the file and is not transferred to the radio T FT 60 Programmer FT 60 Untitled File Edit Communications Settings Window Help DS LOE S eS as 2 Skip Note
96. appears on the face of the radio when that memory channel is selected Priority Time Set the time between instances of monitoring the Priority Channel during other operations The default is 5 seconds This means that every 5 seconds the radio will leave its current operating frequency and check the Priority Channel for activity If activity is heard operations will remain on the Priority Channel according to the condition set in the Scan Resume option Programmable Key Assignments The Internet key the button at the lower left corner of the radio s keypad can be set for functionality other than the default Internet Enable or disables the Internet function Int MR Recalls the Internet Access Number SRG or Access String FRG These details for Internet functinality are set on the DTMF and Internet tab of the Settings screen My Key Set Mode Assign an item from the Set Menu to be accessed via this button The set menu item is selected from those in the My Key field PTT Delay Set the delay time before the carrier is transmitted when the PTT is pressed RX AF Dual Select the resume mode for the AF Dual Operation monitoring two amateur band frequencies while listening to an AM or FM broadcast 2012 RT Systems Inc 140 VX8 and VX8D Programmer Help TX 1 sec TX 10 sec Sets the period of time after activity ceases in the amateur band before the AM or FM station will again be heard unless another signal is rec
97. at the top of the main screen 5 Select the Messages tab of the Settings screen 6 Enter the Member ID Twenty different member IDs can be entered of up to 8 characters each This information is sent as part of the message text The received message appears as Message from Message ID so enter your ID carefully since it will be sent 7 Check the box for the one to be sent as the message ID 8 Enter the Message Text Twenty different messages can be entered of up to 16 characters each into the Message Text of the Message Select List 1 VX8 and VX8D Programmer Help 8 Check the box to select the Message text to be sent This is the message that will be sent when the radio is programmed with this file To send other messages you need to know how to select a message and an ID from the face of the radio Things to consider about messages and IDs 1 Both radios must contain the same messages In testing the message text could occupy different message slots however it had to be there to be displayed 2 Both radios must contain the same message IDs You do not enter your information into all of the 20 slots The information of the person that you will receive a message from must also appear in the list for it to be displayed on the radio with the message 16 4 Radio Menu Settings Sounds Band Edge Beep Enables or disables the audible tone that sounds when the radio reaches a band edge during tuning or scanning Beep
98. ated when listening on the channel If after you program the radio with this file it receives continuously or does not receive an expected signal increase or reduce the squelch for the channel Bell During CTCSS Decode TSql DCS Message or Enhanced Paging Code Squelch Pager operation you may set up the radio so a ringing bell sound or user programmed beep alerts you to an incoming call Select from Off no ring On pre programmed sound or one of three User defined ringers Using this feature requires several things 1 You are using CTCSS Decode T Sql DCS Message or Enhanced Paging amp Code Squelch Pager set up for this channel e CTCSS Decode T Sql and DCS are set up from the main page of the Programmer by turning on the Tone Mode and setting the CTCSS frequency or DCS code e Paging amp Pager requires more setup See the Enhanced Paging and Code Squelch section of this Help for more details e Message required more setup See the Message section located under Programming Other Radio Set Items of this Help for details 2 You select a Bell option from those listed on the main page of the Programmer 3 You set the action of the bell number of rings or Continuous from the Sounds page of the Menu Settings screen accessed from the Settings Radio Menu Settings item in the menu at the top of the main screen A fourth step is required if you are using a customized sound for the bell The User defined ri
99. ather Alert Scan section of the User s Manual You should know how to engage and disengage this option from the face of the radio making it available to you even when the computer is not Active Channel Select the active weather channel from the 10 preprogrammed NOAA frequencies listed 16 2 Radio Menu Settings ARTS CW EAI ARTS Auto Range Transponder System The Automatic Range Transponder System ARTS uses DCS signaling to inform you and another ARTS equipped station that they are within range for communication You need not have two matching radios to use this function Any two radios equipped with the ARTS function can be used See the Auto Range Transponder System section of this Help for further details CW Learning Training The radio is equipped with a feature to help you learn Morse Code CW The tones heard during Learning and Training are not transmitted over the air Several options control this function Form Set to Characters per minute CPM or Words per minute WPM Strobe LED Check to enable flashing of the LED white for a visual representation of the CW being sent CW Pitch Set from 400 1000 MHZ to suit your ability to hear the tone Learning Mode Choose the characters to be studied O 2012 RT Systems Inc 144 VX8 and VX8D Programmer Help e Alpha Sends the same alpha character repeatedly e Alpha Auto Sends an alpha character then moves to the next character automatically e N
100. ation but not both should try setting DCS priority to something other than normal RN TN 15 1 9 Entering Split Pair The Main window of the Programmer is designed for memory channel entry All details associated with the memory channels are programmed from this screen These are not all the functions of the radio Other features are set once for the radio to use no matter which memory channel you re on These items are set on the Settings screen accessed through Settings Radio Menu Settings from the menu at the top of the screen Inthe VX 8 there are LOTS of other options to be set Columns continue off the right side of the window Use the bar at the bottom of the screen to move to these columns or press ENTER to step through each column Columns can be hidden using the selections of the Preferences screen Select Settings Preferences in the menu to access this screen These columns remain hidden in this and any other file new or otherwise until they are unhidden on the Preferences screen Information is entered into these columns automatically when a new frequency is entered The information in a hidden column is always there it is just not visible Make programming extra easy Try Simple Mode in the software for even less to enter Simple Mode is a quick memory channel entry In Simple Mode only the columns needed for the minimum information to set up the channel are shown on the screen Extra columns are hidden and fille
101. bles or disables split CTCSS DCS tones When one of the split tone indicators is set and saved for a memory channel this selection is set automatically The default is Off Time Out Timer Set the maximum time of continuous transmission after which the radio is forced back into receive mode Available values are 5 to 10 minutes and Off The default is 3 minutes Timers Set details to control the radio s ability to turn itself on and off at preset times Check to enable and set the desired time Note This function will not work unless the radio s clock is set This function is done from the face of the radio not from the Programmer See Manual for details on setting the clock Tone Search Mute Enable disable the radio s audio output while Tone Search scanning is activated Tx Save Enables or disables the Transmitter Battery Saver function that automatically lowers the power output level based on the strength of the last signal received The options are On checked and Off unchecked The default is Off VFO Mode Set the VFO band edge condition for manual tuning All When the VFO frequency reaches the high end of the current band scanning continues with the low end of the next band Band When the VFO frequency reaches the hight end of the current band scanning continues at the low end of the same band VOL Key Mode Change how the Vol key responds when pressed This change determines whether you continue to hold the
102. can skip the steps to put the radio into Clone mode since it usually remains in Clone mode after Get data from is completed O 2012 RT Systems Inc 238 VX8 and VX8D Programmer Help 23 1 Get Data from Radio Required The first time you attempt to send your file to the radio this message may appear r Radio Programmer i Your are required to do Communication Get Data From before you can send data to the radio This indicates that you have not read the configuration of the radio into the programmer There are details that the programmer can get only from the radio Even if the radio is not yet programmed these background details are necessary for the programmer to send a file to your radio successfully 2012 RT Systems Inc 240 VX8 and VX8D Programmer Help 24 Invalid Frequencies This information is meant to address radio operators inthe US While many of these details are true in other countries some are not Band plans allowable frequencies and other details differ around the world but many of the functions of the radio remain the same making this information useful to everyone This section is offered to help users understand why a frequency is rejected by an amateur radio The Programmer will not allow you to enter a frequency that your particular radio cannot use Your radio is designed to work on all frequencies in the amateur bands Problems arise when frequencies from commercial
103. cations Send Data To This process programs the radio with the details of the file that is on the screen If the file is blank you will have a blank radio Be sure you see your frequencies on the screen before you start this part of the process Radio to computer cabling Check the photos to be sure you are using the correct cabling for your radio Communications Get Data From Radio Uploads the contents of the radio memory to the computer This function is often referred to as reading the radio since memory information is read from the radio This step is required before the first file can be sent to the radio Files with frequency information can be created in the Programmer without executing this step The data from the radio will overwrite this file Continue This message will be raised by the programmer when you select Communications Get data from radio with a file open that is not a new default file into which no entries have been made This message is warning you that you will replace any information you have entered with whatever is in the radio The whatever could be all blank channels 2012 RT Systems Inc Radio Computer Data Transfer 159 Answer yes if you want to lose all the information that appears on the screen Answer no if you don t want to lose several hours of work spent creating the file on the screen To prevent loss of information first do File Newto open a new default file Then
104. cations Send Data To radio to program your original radio Suppose you are only making changes to memory channel information for both of your original and D radios Open the file Make changes Save the file either same name or different your choice Check the titlebar Execute Communications Send Data To radio with the radio that matches that of the titlebar i e VX 8 Programmer to the original radio VX 8D Programmer to the D radio Close all files in the Programmer saving as necessary For the other radio Open New File File New Execute Communications Get Data From radio Be sure to Get Data From the other radio Notice that the designation in the titlebar changes now with or without the D as appropriate for the radio This should be different from what was there before you read the radio Open the file into which you made the changes Execute Communications Send Data To radio to program this radio This may seem a little clumsy given the radios appear to be so similar Suffice to say Appearances are deceiving Programming Memory Channels Original or D The radio has lots of different types of memory channels In the Programmer these all program in a spreadsheet dedicated to that type of memory Use the links to access details for any one of these 2012 RT Systems Inc 2 VX8 and VX8D Programmer Help 15 1 Regular Memory Channels The several hundred all radios ha
105. cial feature of the radio designed for a specific function rather than general use Tx Power The output power can be set individually set for each memory channel to address the exact needs of each operation Select Low1 Low2 Low3 or High for each memory channel The power out for each of these settings varies for this radio depending on its power source battery or DC power supply and frequency See the User s manual for the specifics Skip Marks selected memory channel to be skipped during scanning These channels remain available for manual selection by turning the knob Off The channel will be scanned for activity whenever scanning is done Skip The channel will be skipped P Scan The channel is included in a special scanning group These channels are scanned when scanning is begun on a P scan channel Step The frequency that the radio is on changes by the value of the step when tuning manually This value is used by the radio in Memory Tune mode This value is not critical in memory mode since the original memory channel frequency can be retrieved by exiting Memory Tune mode In VFO this value could keep you from returning to your original frequency Select from Auto 5 6 25 10 12 5 15 20 25 50 or 100 kHz steps as needed Note There are some special exceptions for setting step including e AM Broadcast band only step values of 9 0 and 10 0 kHz are available e Air band includes 8 33 kHz This step value is not available
106. d 22 Ignore Receive Frequency Transmit Frequency Offset Frequency Offset Directio 147 345 600 kHz Plus 146 955 600 kHz Minus 147 060 600 kHz Plus 146 625 600 kHz Minus 146 315 Minus The resulting file contains the data just as it was in the Excel spreadsheet Roose Tear Other Ott Frequency Frequency Frequency D T6010 195 01000 4400000 43 00000 Iran so a Tia ia a ba ba ia ia b om ba im ba ia T 2012 RT Systems Inc Importing a file 213 21 Importing a file The Programmer can Import data from delimited text files These files can be created using the Export feature of the Programmer for another radio Travel Plus for Repeaters by ARRL commercial spreadsheet programs or text editors Limitations for use of another commercial spreadsheet program include e The spreadsheet program will know none of the limitations of the radio It will allow you to enter any value in any space You will have to enter transmit and receive frequencies CTCSS tones and DCS codes carefully to be sure they are imported correctly to the radio e You will need to organize your data carefully The Programmer will import all the items from a single column as the same thing This can cause an odd split to be entered as Simplex or a non standard offset to be ignored The easiest way to begin a text file for your Programmer is to Export a file from the Programmer first In that exported file you will see column headers
107. d The audio can be reduced 30 50 or 100 2012 RT Systems Inc 134 VX8 and VX8D Programmer Help Auto Power Off Set the time after which the transceiver will automatically shut off in an attempt to conserve battery life Auto Repeater Shift The Auto Repeater Shift option automatically sets the offset for any frequency to which you tune manually while in VFO The shiftis determined by a preset plan as shown in the Automatic Repeater Offset section of the radio s manual While this option is useful while in VFO or memory tune any time you tune the radio manually it does not affect the functionality of the Programmer nor the radio s functionality on a memory channel The option in On by default BlueTooth Set The radio has the ability to use the options BH 1 or BH 2 Bluetooth headset for wireless Vox operations Use of this device requires installation of the BU 1 Bluetooth Adapter Unit in the radio Options to be configured include VOX Enables functions of the TX RX switching circuit of the Bluetooth function e Off Disable the receive function e PTT The Bluetooth function works through the PTT e High Vox operations with increased receive sensitivity high gain e Low Vox operations with decreased receive sensitivity low gain Mode Control the receiver audio output mode of the Bluetooth unit ignored with BH 2 e Stereo Outputs stere receive audio while listening to FM Broadcast Note Wh
108. d the connector to be sure the modular plug is plugged into the mic jack completely There can be a good bit of play between the mic jack and the plug Hold the cable securely until the process is complete 2012 RT Systems Inc 250 VX8 and VX8D Programmer Help 26 Contact Us RT Systems Inc 510 Compton Street Suite 105 Broomfield CO 80020 Technical 303 586 6510 support Fax 770 216 1836 Technical Monday through Friday Support Hours 10 30AM until 6 00 PM Eastern Time 9 30AM until 5 00 PM Central Time 8 30AM until 4 00 PM Mountain Time 7 30AM until 3 00 PM Pacific Time Other times by appointment Call or e mail to make arrangements Web Page www rtsystemsinc com Program updates Answers to frequently asked questions can be reviewed under FAQs on our site E mail techsupport rtsystemsinc com Should you choose to send a message via e mail be sure to include at the very least the following details e The radio with which you use the Programmer e The version number of the Programming software 2012 RT Systems Inc ntact us 251 found in the Programmer under Help About Based on the information given we will respond as quickly as possible Be sure that rtsystemsinc com is set as an acceptable address for your e mail program Or watch for your response in your spam or junk mail folder 2012 RT Systems Inc 252 VX8 and VX8D Programmer Help Index A Activating Prior
109. d with default information To put the screen into Simple Mode select Edit Simple Mode from the menu While in Simple Mode you cannot access the Preferences screen The Programmer controls what columns 2012 RT Systems Inc Programming Memory Channels 115 are hidden while in this mode Details to be entered for Memory Channels Receive Frequency Enter a receive frequency for the memory channel Acceptable frequencies are detailed in the User s Manual for the radio e Unacceptable frequencies cannot be entered into the Programmer Cellular frequencies are blocked e Memory channels can store any acceptable frequency in any order i e UHF can follow VHF or any other band order e The first memory channel must be programmed e While memory channels can be entered in any order the sub band receives on fewer bands than does the main band Realize that memory channels containing frequencies outside the range of the sub band will not be displayed there as they will be on the main band The radio will simple skip over that memory channel when tuning in memory mode or scanning on the sub band Transmit Frequency Enter a specific transmit frequency or let the Programmer calculate this frequency based on the offset This field is always available however the transmit frequency for an odd split is the only value that must be manually entered Acceptable transmit frequencies are 144 148 MHz and 430 450 MHz Note In the Pr
110. dard offset value Any offset frequency value is ignored by the radio if the offset direction is set to Simplex or Split A nonstandard Offset Frequency value is entered by typing that value into the Offset Frequency field after the Receive Frequency has been entered for that channel Then O 2012 RT Systems Inc Programming Memory Channels 117 select Plus or Minus in the Offset Direction column and watch the Programmer calculate the Transmit Frequency Values would be entered as an exact number including the decimal to denote kHz e Given the pair 146 650 and 147 300 e The Offset Frequency entered would be 650 decimal six five zero Without the decimal an error is raised in the Programmer that a valid Offset Frequency should be entered e The Offset Direction would be set to Plus As another example e The pair 147 255 and 145 940 could not be entered with an Offset Frequency and an Offset Direction e The resulting offset for this pair us 1 315 MHz which is not on a 50 kHz step does not divide evenly by 50 e This pair requires entry of both the Receive and Transmit frequency with the Offset Direction set to Split e inthis case any value that appears in the Offset Frequency column will be ignored by the radio when it uses this memory channel Offset Direction This function denotes how the receive and transmit frequency differ Simplex transmit and receive frequencies are the same Minus the offset is subt
111. djustments for A Band B Band and Radio Band AM FM broadcast reception operations These include Speaker Volume Set the volume for sound from the speaker of the radio Earphone Volume Set the volume for the sound through an earphone connected to the radio Setting or checking this option on the radio is possible only if an earphore is attached Squelch Control squelch levels that are appropriate for each of these bands of the radio 16 5 Radio Menu Settings DTMF Internet DTMF Settings DTMF Autodial memories are provided allowing you to store telephone numbers for autopatch use repeater control or Internet link access You can also store short autopatch or Internet link access code streams so as to avoid having to send them manually The 16 button keypad allows easy DTMF dialing for Autopatch repeater control or Internet link access purposes Besides numerical digits 0 through 9 the keypad includes the and digits plus the A B C and D tones often used for repeater control DTMF Auto Dialer Enable or disable the DTMF Autodialer feature to allow transmission of DTMF tones for autopatch or Internet link access 2012 RT Systems Inc 150 VX8 and VX8D Programmer Help DTMF Channel Select the one of the 10 DTMF memory channels to use DTMF Speed Set the speed at which the DTMF tones are transmitted Some repeaters require alteration to this speed to hear all the tones correctly
112. do from the menu of the radio when you are ready to use it More details on this feature can be found in the Internet WIRES Functionality section of this Help 2012 RT Systems Inc Programming Other Set Menu Items 151 16 6 Radio Menu Settings VFO and Menu Skip My Bands VFO skip bands The My Bands feature lets you select bands to be omitted when selecting VFOs with the Band key In the Programmer an unchecked selection is included on the radio To omit a band check the box next to that selection Both AM and FM cannot checked Similarly all of the ham bands cannot be omitted Menu Item Skip This process is completed in two steps 1 Select the menu items that will not appear when you access the Set Item menu in the radio 2 Check Extended Menu On to hide these items on the radio If items are selected and the Extended Menu On item is not the selected items will appear with an asterick beside each Once the Extended Menu item is set to On either in the radio or from the Programmer these menu items will be hidden Note You should know how to engage and disengage each of these functions from the face of the radio In the field away from your computer you may need tp access a band or an item that is hidden 16 7 Radio Menu Settings VX 8 APRS GPS The Automatic Packet Reporting System APRS was designed to support rapid reliable exchange of information for local tactical real time information
113. e Vie W cocino ln dada ida 185 6 Saving Programming FlleS mcciiiii nsere naranai aK AETA EE AAE AREER EENAA REE 188 E A O AN 188 Fil Save A A 189 Part XIX ARRL TravelPlus 192 1 Creating a list in TravelPIUS ccccceceee tees ee ee eee ee eeeeeeeeeeaeeeeeeeaaeeeeesaeseeeesaaeeeeeeaaeeeeeeaaeeeeeeas 192 2 Opening the list in the ProgrammMel cccceeeceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeseeeseneeeeeeenees 194 3 Using the TravelPlus List with existing programmer file cccccseeceeeeeeeeeeeeeeeeeeeeeeeeeeneees 198 Part XX Copying From an Excel Spreadsheet 204 E A nce siete ais teead oy ceesde A E E 204 2 SUG Pi Desire acs fect sce A A A A a 205 BS o e E T O A A A A A T 206 Ar SHO A OT 207 O PS N S 208 O SO Guin dad ini 210 Part XXI Importing a file 213 Creating a file for IMPOrE ini iii 214 port Sep iii a a Aa sive 220 IMport p a 222 O 2012 RT Systems Inc e VX8 and VX8D Programmer Help A Import Step aoaaa aa adaa a ia aa aE ahaaa a da adaa 5 IMport Step Amici iia Part XXII Export Part XXIII Troubleshooting 1 Get Data from Radio Required cooonccocnccconcceonncnennccnnnnnnnnnnnnn Part XXIV Invalid Frequencies Part XXV Hardware Error Troubleshooting Part XXVI Contact Us Index 228 230 240 245 250 252 O 2012 RT Systems Inc Foreword These help files are offered as reference for the features of the programmer and with some added information about the
114. e a split tone option set for Tone Mode 95 SQL Type Main screen Tone Mode This option can be set for each memory channel The option must be set before a CTCSS frequency or DCS code can be changed El Main screen Offset Frequency This option can be set for each Frequenc memory channel Settings Radio Menu Settings Sounds tab FM Broadcast Time Set Not addressed in the Programmer If it were the time on the radio would reset to the value in the file each time the radio was programmed with this file Once the option is set on the radio it is not changed by the Programmer E Main screen CTCSS This option can be set for each memory E o channel The option cannot be changed unless Tone Mode is set to a CTCSS option that uses this value Mute Mute check box Speed roca check box TOT _ Settings Radio Menu Settings Common tab Time Out Timer Unit Offset Settings Radio Menu Settings Common tab Altitude and Barometric Units Offset in Display section Barometric Units Offset in Display section Main screen VFO tab Skip 107 Volume Settings Radio Menu Settings Common Tab Volume Key Mode Mode In the Programmer the settings for this option Hold and 3 sec reflects the description of the Normal and Auto Back functions as detailed in the User s Manual for the radio 110 Wave Settings Radio Menu Settings Common tab Wave Monitor in Monitor Display section Settings Radio Menu Setti
115. e offset direction is set to Simplex or Split A nonstandard Offset Frequency value is entered by typing that value into the Offset 2012 RT Systems Inc Programming Memory Channels 107 Frequency field after the Receive Frequency has been entered for that channel Then select Plus or Minus in the Offset Direction column and watch the Programmer calculate the Transmit Frequency Values would be entered as an exact number including the decimal to denote kHz e Given the pair 146 650 and 147 300 e The Offset Frequency entered would be 650 decimal six five zero Without the decimal an error is raised in the Programmer that a valid Offset Frequency should be entered e The Offset Direction would be set to Plus As another example e The pair 147 255 and 145 940 could not be entered with an Offset Frequency and an Offset Direction e The resulting offset for this pair us 1 315 MHz which is not on a 50 kHz step does not divide evenly by 50 e This pair requires entry of both the Receive and Transmit frequency with the Offset Direction set to Split e inthis case any value that appears in the Offset Frequency column will be ignored by the radio when it uses this memory channel Offset Direction This function denotes how the receive and transmit frequency differ Simplex transmit and receive frequencies are the same Minus the offset is subtracted from the receive frequency Plus the offset frequency is added to th
116. e process is more easily done now with the keyboard rather than the mouse Press Right Arrow to move focus back into the Bank 1 column Notice that there is now a black border on that cell The cell is now ready to be copied Press Ctrl C or select Edit from the menu then copy from the list that opens to copy the cell O 2012 RT Systems Inc Easy Editing in the Grid OF soa SOS ANF bore DOE a e s mz ii e HE joo DONI I meeen ponod gobs Nooo NoLES PECANS DRIDCO Donna t 1 SOO SOL POCO OOS UOC OSHS SEO To ETS og DoH big DEEICEJ I DUOCICRISOUCISESECOEICEICE en t l ti i NTN UNA a A ECONO poca lona as RIRI Ja RRARRARRDRRET TOTES Press and Hold the Shift key while pressing the Down Arrow key to select the rows that will be set with this information ONDA OOO COORULanTEo 1 4 re A a DODODDLDJODON 8 9 8 amp 4 DLU DO UODO 8 8 9 8 8 9 8 Dn A DE 88 9 98 95 9 9 9 9 9 9 98 9199 89 9 HH HOHOU HDHD HEEE l 41 OE A sass eosicocec o Ms ss LLL LLL Ilcllclclell ieie 8 9 8 9 9 9 91 9 fields Press Ctrl V to paste the selecting into the 2012 RT Systems Inc so VX8 and VX8D Programmer Help Simple Mode Hides several of the columns for each memory channel Those remaining are the ones that are most needed for
117. e receive frequency Split for a non standard offset The user enters both the receive and transmit frequencies Operating Mode Assign FM AM or WFM as appropriate for the frequency Name Enter an Alpha Numeric tag up to 16 characters to a memory channel to provide an easy reminder of the function of a particular channel The Name is displayed automatically on the radio beneath the operating frequency The name will not be displayed if the radio is operated in Dual Receive mode 2012 RT Systems Inc 108 VX8 and VX8D Programmer Help Tone Mode Use of the tone systems of the radio allows for silent monitoring until a call is received with a corresponding tone Tone mode also allows access to repeaters that are made private with a PL tone The radio offers CTCSS Continuous Tone Coded Squelch System or DCS Digital Coded Squelch to be tailored to your particular needs Use of either of the tone systems requires two steps 1 Turning on the Tone Mode and 2 Selecting the CTCSS tone or DCS code from the values in the appropriate column The Tone Mode options are None No tone system activated Even if the CTCSS Tone or DCS Code column is set to the appropriate value transmissions will not get through unless this column is set to an appropriate function Tone CTCSS tone generator is activated for transmission only this mode is used for many if not most repeater operations When this option is selected the CTC
118. e top of the screen A window opens to complete the process O 2012 RT Systems Inc Copying From an Excel Spreadsheet 207 o royre FEG Yette ek Fee Gar Commurcstere ietege Window Help DEE sBB SCE ASH fecewe lianne Core Frame Fanen Fermi Cie chot see Deport Step 7 014 Lae il bert tent 2 core ine ct a one ol Secado come Space Oae Tec Qusier More Corn Cam Coker Cimi Ginet Coleen Ohne ma Aa m RP 105 66 Mowe m PRANE 100060 A As m CAPA 146425 be Mne m Hs 146355 Okt Mna Ma we ba ioe Carcel ree WSSSESSSESASSSHUX RARA 20 4 Step 4 On this screen you may need to use the Text Qualifier to remove quotes from your data The data should be appear as it does in this image without quotes and separated into columns O 2012 RT Systems Inc 208 VX8 and VX8D Programmer Help r Import Step 2 of 4 Select field delimiters Semicolon Other Comma Treat consecutive delimiter as one Text Qualifier 147 345 146 955 147 060 146 625 146 315 Column 1 Column 2 Column3 Column 4 600 kHz 600 kHz 600 kHz 600 kHz 600 kHz Column 5 Column 6 Column 7 Plus Minus Plus Minus Minus FM FM FM FM FM HP ARC PSL ARC MCARA HobeS WPB EC Click Next to continue 20 5 Step 5 In this step of the process you identify the information in your spreadsheet for the programmer The programmer attempts to identify the co
119. e tuning on the face of the radio Try other Step values until you re satisfied that the radio just cannot be made to do that frequency Step 2 Compare your frequency to this list If you find it here it will work Note x represents any number 2012 RT Systems Inc 242 VX8 and VX8D Programmer Help 1 xxx xx500 Generally only 5 or 0 allowed in the third position with all Os after that A few exceptions are shown below 2 xxx x12500 Allowable for four digits after the decimal The first digit after the decimal can be any from 0 to 9 3 xxx x375 Allowable for four digits after the decimal The first digit after the decimal can be any from 0 to 9 4 xxx x625 Allowable for four digits after the decimal The first digit after the decimal can be any from 0 to 9 5 xxx x875 Allowable for four digits after the decimal The first digit after the decimal can be any from 0 to 9 Comparing 154 03125 There is a 1 in the third position after the decimal By Rule 1 this is not allowed for an amateur radio The frequency does not fit into any of the others that allow 4 digits after the decimal Step 3 Do the math Allowable frequencies in Hz must be evenly divisible by 5000 or 12500 or 6250 Hz Convert your frequency to Hz 154 03125 x 1 000 000 154031250 Divide that number by 5000 154031250 5000 30806 25 154031250 12500 12322 5 154031250 6250 24645 The 6250 Hz division was successful
120. eaconing Setting to customize AND Smart Beacon Type to set one for use when Beacon Tx is set to Smart This item is not a part of the original VX 8 radio It does not appear in the Programmer for that model Settings Radio Menu Settings ARPS GPS tab Time Zone 2012 RT Systems Inc VX8 and VX8D Programmer Help 2012 RT Systems Inc VX8 and VX8D Programmer Help 10 Auto Range Transponder System The Automatic Range Transponder System ARTS uses DCS signaling to inform you and another ARTS equipped station that they are within range for communication You need not have two matching radios to use this function Any two radios equipped with the ARTS function can be used ARTS is used in simplex mode The radio must receive on the same frequency as that transmitted by the other radio When setting up a channel for ARTS VFO or memory set the e Offset Direction to SIMPLEX e Tone Mode to DCS e DCS code to the same value in each radio Besides its value in search and rescue operations ARTS makes a great did you hear me feature As long as the two radios show INRANGE you can be sure that the radio received your audio Presuming that the volume on the receiving radio is sufficient you can be sure that your signal was heard Especially when driving the other operator may not be able to respond immediately to your communication If ARTS remains successful you can be sure that the voice transmission wa
121. ecific function rather than general use Tx Power The output power can be set individually set for each memory channel to 2012 RT Systems Inc Programming Memory Channels 111 address the exact needs of each operation Select Low1 Low2 Low3 or High for each memory channel The power out for each of these settings varies for this radio depending on its power source battery or DC power supply and frequency See the User s manual for the specifics Skip Marks selected memory channel to be skipped during scanning These channels remain available for manual selection by turning the knob Off The channel will be scanned for activity whenever scanning is done Skip The channel will be skipped P Scan The channel is included in a special scanning group These channels are scanned when scanning is begun on a P scan channel Step The frequency that the radio is on changes by the value of the step when tuning manually This value is used by the radio in Memory Tune mode This value is not critical in memory mode since the original memory channel frequency can be retrieved by exiting Memory Tune mode In VFO this value could keep you from returning to your original frequency Select from Auto 5 6 25 10 12 5 15 20 25 50 or 100 kHz steps as needed Note There are some special exceptions for setting step including e AM Broadcast band only step values of 9 0 and 10 0 kHz are available e Air band includes 8 33 kHz This step v
122. ectory The second time use ftdiport ini in that same directory Then attach the cable again Check in Device Manager to be sure it is now listed under Ports Com and Lpt with a comport designation assigned Modified Radio r Communication Error The information in the radio does not match that of the file Click OK for more information about this error Click Cancel to cancel and try again A O 2012 RT Systems Inc 234 VX8 and VX8D Programmer Help This error is raised when you attempt to send a file to a radio that is modified before the programmer is given that information lf your radio has been modified you must complete Communications Get data from radio into a new file before you attempt to write data to the radio When the Get data from radio process is used even if the radio is not yet programmed the Programmer gets the data it needs to know that the radio is modified When you use Communications Get data from for the sake of establishing communications you need to save the file ONLY if you want to save the memory data that is currently in the radio The Programmer already has what it needs The option to save is available should you want to save the pre programmed data Cabling to properly address the radio The Version 4 RT Systems Programmers work only with the e RT Systems USB cables OR e Original RT Systems serial cable with the RTS 03 USB to serial adapter No other USB cable wi
123. efore returning to 144 300 to begin the cycle again The Limit Memory channels are entered on the Limit Memories page accessed through the tab of the same name at the bottom of the screen The same information as that entered for any memory channel is entered for these See the Regular Memory Channels section for the details about the information to be entered In the Limit Memory channels Step becomes much more important since you plan to begin scanning from one of these channels Remember that scanning will increment the frequency by the value in the Step field Choose your value to be sure you do not miss channels in your range See page 68 in the operating manual of the radio for details on accessing this scanning method from the face of the radio Some options for scanning can be set from the Programmer These are global items that are accessed from Settings Radio Menu Settings from the menu at the top of the screen Once on the Settings screen scanning functions are found on the first screen that opens the Common screen ElA and Weather Memories EAI Memories O 2012 RT Systems Inc Programming Memory Channels 125 Your radio includes an Emergency feature that may be useful if you have someone monitoring the same frequency as your transceiver s UHF Home channel The Emergency Automatic ID EAI feature can be used for searching for persons who are incapacitated in disasters like earthquakes especially search and rescue perso
124. eived before the timer expires and the broadcast reception is resumed and the AF Dual Operation must be resumed manually TXR 1 sec TXR 10 sec When the selected time passes after the amateur band signal drops of transmission is over the AM or FM station will again be heard and the AF Dual Operations is resumed Hold When activity occurs in the amateur band the AF Dual Operation is halted and can only be resumed manually RX Save Set the Receive mode battery saver interval that controls the sleep function This battery saver mode puts the radio to sleep at times of little activity The radio then wakes at a given interval to listen for activity The available values are Off 200 ms 300 ms 500 ms and 1 second to 10 seconds The default is 200 ms Scan Lamp Enables or disables illumination of the LCD lamp whenever the scanner stops while scanning When enabled you are able to see the frequency of the incoming signal more easily in a low light situation Memory Scan Mode Select the scanning to be performed while in memory mode All Channel Scanning includes all the memory channels Tag 1 Scanning includes only those memory channels with the same first digit of the name as that of the channel where scanning was begun Tag 2 Scanning includes only those memory channels with the same first and second digits of the name as that of the channel where scanning was begun Band Scanning includes only those memory channels
125. el increases weaker signals are not heard and incoming noise is eliminated when listening on the channel If after you program the radio with this file it receives continuously or does not receive an expected signal increase or reduce the squelch for the channel Bell During CTCSS Decode TSql DCS Message or Enhanced Paging Code Squelch Pager operation you may set up the radio so a ringing bell sound or user programmed beep alerts you to an incoming call Select from Off no ring On pre programmed sound or one of three User defined ringers Using this feature requires several things 1 You are using CTCSS Decode T Sql DCS Message or Enhanced Paging amp Code Squelch Pager set up for this channel e CTCSS Decode T Sql and DCS are set up from the main page of the Programmer by turning on the Tone Mode and setting the CTCSS frequency or DCS code e Paging amp Pager requires more setup See the Enhanced Paging and Code Squelch section of this Help for more details e Message required more setup See the Message section located under Programming Other Radio Set Items of this Help for details 2 You select a Bell option from those listed on the main page of the Programmer 3 You set the action of the bell number of rings or Continuous from the Sounds page of the Menu Settings screen accessed from the Settings Radio Menu Settings item in the menu at the top of the main screen A fourth step is required
126. elp 15 1 1 Memory Banks The VX 8 provides 24 Memory Banks labeled b 1 through b24 Each Memory Bank can be assigned up to 100 channels from the regular memory channels The regular memory channels include 900 standard channels numbered 1 900 Memory banks offer a way to organize your channels for specialized operations A simple scenario of this organization might include e Putting all your VHF and UHF ham repeaters into Bank 1 If you use your radio mainly for hamming you would operate in Bank 1 most of the time so you can scan without having to listen to all the other traffic e Then put your Fire and Rescue channels into Bank 2 When you re on the scene of an emergency you would operate in Bank 2 to eliminate interference from the amateur traffic e If you travel for business to one other location repeatedly put the channels for that location into Bank 3 When you are there you operate in Bank 3 Then when you scan for activity you scan 10 channels instead of the 100 you now have in memory Remember if one of these repeaters is the same as one in your home group including Tone mode and value there is no need to program that repeater into another memory channel Simply include it in both Banks 1 and 3 to have it available in both locations This is a simple example The types of activities may not even apply to you but the concept is the same no matter what the activities Memory Bank Assignments To assign a m
127. els to select rather than trying to select them with the mouse simply select the first one and press Ctrl A The copy and paste process does not care if blank channels are selected O 2012 RT Systems Inc Easy Editing in the Grid 39 Me tat Communication Settings Window Cee she SoS wt Copy Command From the menu at the top of the screen use your mouse to left click on Edit From the menu that opens use the mouse to left click on Copy You can also copy by pressing Ctrl C on the keyboard Or while pointing at the screen of the programmer right click and select Copy from the menu that opens 2012 RT Systems Inc 4 VX8 and VX8D Programmer Help Tara Mode CTCSS z z F y z e 7 z 3 E 3 Capry the selection ard pt ton the Clpboerd It will appear that nothing has happened The program in conjunction with built in commands of the operating system of the computer has copied the data Itis waiting for you to Paste it where you want it Paste Ctrl V Writes the selected data to the current position of the cursor overwriting the data from that point The Version 3 and Version 4 programmers have the ability to copy and paste data in a single column as well as for an entire row Paste Complete Channels Use the mouse to select the channel where you want the data to start This can be in another file for the same radio or one for any radio for which you use an RT Systems Version 4 program
128. emory channel to a bank check the box for that channel under the column for the Bank Keep this in mind as you do your assignments A channel can be include in no bank A channel an be included in all banks A channel can be included and not included as needed in your organization of your channels Use Settings Bank Settings from the menu at the top of the main screen to make the process of assigning channels to banks easier When Bank Settings is engaged several columns are removed from the screen automatically This makes it easy to work with the spreadsheet without 2012 RT Systems Inc Programming Memory Channels 103 having to scroll across so many columns You will need to know how to access memory banks from the face of the radio Consult your operating manual for details Accessing Memory Banks The programmer makes it easy to assign the channels to memory banks However it cannot select the bank to be used That is done from the face of the radio after it is programmed To access the memory banks Be sure the radio is in memory mode as indicated by the MR next to the displayed frequency If itis not press the V M key briefly to enter memory mode Press BAND key to enter bank mode as indicated by the B that replaces the MR next to the displayed frequency is the bank number The radio will return to the last bank used or will go to bank 1 if this is the first time you have accessed bank mode No
129. ems Inc Troubleshooting 235 cable Check the cabling specified in the help for the radio that you re programming to be sure that you re using the right one to address the radio Icom specific issue for Clone mode Other than the Icom IC R10 at the time of this writing Icom radios are NOT put into CLONE mode for programming CLONE mode is used only when you transfer data from one radio to another The process for programming the radio from the computer is simple When the instructions say to Turn the radio on do just that press the power button to turn it on If pressing a key is needed as a part of this step it will be included with the instructions on the Get data from screen Yaesu Radio does not go into Clone mode after initial menu selection Many Yaesu radios handheld and mobiles access Clone mode from a startup menu When you turn the radio on holding the specified key you are in that menu with several options of radio functions Clone is only one of these options Once the Clone option is found in that menu another key on the radio is pressed to activate that mode You know the options has been activated when the radio cycles off and back on Only then is it in Clone mode and ready to program lf the radio does not cycle off and back on when that next button is pressed one of the following may address the issue The keys on the face of the radio are locked Turn the radio off and back on in normal mode to check for
130. en this option is selected the VOX function is disabled even if ithas been engaged TX RX switching is performed only by pressing the PTT e Mono Outputs monaural receive audio while listening to FM Broadcast Save Enable or disable the battery saver in the BH 1 or BH 2 device If there has been no signal for 20 seconds the saver puts the BH 1 or BH 2 into sleep mode to conserve battery life The device becomes active again when a signal is received or the PTT is pressed Power Enable or disable the B uetooth unit P Code The code used to identify your B uetooth device to your radio The 2012 RT Systems Inc Programming Other Set Menu Items 135 default code can be changed See Manual for details of how to assign that code to the BH 1 or BH 2 once it has been changed in the radio Busy Channel Lockout The Busy Channel Lock Out feature stops the radio from transmitting if a signal is being received Busy LED Control the LED that lights in the Band A or B key indicating signal reception Disengaging this option will help to conserve battery life Channel Counter The radio has the ability to give a good indication of a transmission frequency without knowing that exact frequency in advance This feature works when the radio is close to the radio that is transmitting Through a high speed search over a range above and below the displayed frequency the radio identifies the strongest signal in the preset range The ide
131. ep ic208 ES 1C 208 208 2 Step tab Eker Adjusted for Tone CSV PE PEARL csv ES sdfedf ic208 Peame Files of type Al files 7 Comma Deimited_ csv This screen gives you the ability to find and open the file to be imported e Use Look in at the top to change directories as needed e Use File of type at the bottom to show other files in the directory you selected Since the most common file types are csv and tab you may need to change types for your file to appear e Once your file is highlighted select Open to proceed Import Step 1 of 4 Identify one or more of the first rows of data to be omitted Import Step 1 of 4 Select rows from begining of ist to skip on impot Eliminate channels from the beginning of the list by increasing the counter 2012 RT Systems Inc 222 VX8 and VX8D Programmer Help 21 3 This screen was used originally to omit headers columns without data from the import This is no longer necessary Actually it is recommended that you leave the headers to help you more easily identify the information in a later step This step remains useful for eliminating a number of memory channels from the import process For example if your file contains more channels than are allowed by the radio You could eliminate multiple channels here rather than later in the import process Click Next to continue Import Step 2 Import Step 2 of 4 Identify the del
132. equencies for this function are not set here 3 Set the Bell to ring when a call is received Optional This is done by setting the Bell column on the Main screen of the Programmer to a selection other than Off 4 From the menu at the top of the screen select Settings Radio Menu Settings The Menu Settings screen opens 5 Select the ARTS CW EAI tab 6 In the Pager section on this page set the CTCSS tones for Receive and Transmit Codes Both the number of the selection and the tone to be used are shown in the Programmer 7 Check the box for Answer Back to have the radio respond automatically to the received call optional Contingent on FCC rules governing automatic transmissions in the 144 Mhz frequency range 8 If the Bell option is engaged Bell column on the main page of the Programmer select the Sounds tab of the Menu Settings screen 9 Set the option for CTCSS DCS Bell to the number of rings or Continuous 10 Ifthe Bell option is set to User 1 2 or 3 on the main page of the Programmer configure that user melody in the User Beep Melody section of this screen 11 Select File Save to save the changes to the settings made on the Menu Settings screen If you are working in Untitled rsf you will be prompted for a filename Enter a name to complete the process 12 Select File Exit to close this screen and return to the main screen of the Programmer O 2012 RT Systems Inc Enhanced Paging and
133. ere are other databases available My Position Select the information be used for your current location The option can be set to GPS Auto Longitude Latitude or one of the 10 memorized positions Man P1 P10 Table The table displays memorized positions used during GPS operations Position Set for MMM or SS Speed Set in kmph mph or knot Time Set Set use of the GPS clock data to Auto or Manual APRS Settings AF Dual Enable disable the AF Dual function while operating in APRS This is the RX AF Dual function that allows you to monitor two ham band frequencies while listening to a broadcast band Although engaged during 2012 RT Systems Inc Programming Other Set Menu Items 153 normal operations this feature can be engaged or disengaged during APRS operations APRS Modem Enable disable the APRS mode and set the baud rate B Band Mute Enable disable audio output on the B Band during APRS operations Message Flash Visual indication by the radio s LED when a message in one of the three MSG GRP or BLN types is received The flash response can be set differently for each of the three types of messages Note This option is not detailed in the manual for the VX 8D You will see the change to this option on the face of the radio Message Ringer Enable disable the audible sound heard when an APRS Message is received This option can be set independently for a message group message or My Symbol
134. ettings Messages Options on this screen of the Settings file include Opening Message as well as Message Groups Message Text Message Member List and Message Select List for GPS and APRS transmissions Radio Menu Settings Sounds Adjustments for volume squelch bell ringers speaker output and customized melody for User Beep are made with the options on this screen Radio Menu Settings DTMF Internet Fields here address options for DTMF and Internet functionality Radio Menu Settings VFO and Menu Skip Make adjustments to hide and show menu items and Ham bands on the radio Radio Menu Settings APRS GPS Adjust settings for GPS and APRS features Radio Menu Settings APRS Beacon Options for APRS Beaconing and Smart Beaconing are adjusted on this page of the Settings file 2012 RT Systems Inc 130 VX8 and VX8D Programmer Help You will find that these headers correspond with screen names in the Programmer This makes finding the details for the settings on a certain screen easier The Programmer offers three options for managing the global settings Set and forget The Radio Menu Settings screens are there for you to use to easily customize your radio to suit your use Once you make your selections and save them you don t have to do it again even it you start a new frequency file Create and use multiple global settings files This might be the best option if you program the frequencies for several d
135. events or nets 2012 RT Systems Inc 152 VX8 and VX8D Programmer Help The concept which dates back to the mid 1980 s is that all relevant information is transmitted immediately to everyone in the net and every station captures that information for consistent and standard display to all participants The primary objective is consistent exchange of information between everyone For more information on this system search the web for APRS The search will return many articles with a plethora of information including several from the ARRL site The VX 8 displays your position Longitude Latitude when the optional FGPS 2 GPS Antenna Unit is attached to the radio The radio is also equipped with a data modem to enable APRS transmissions The APRS is a software program and registered trademark of Bob Bruninga WB4APR Many of the APRS and GPS details can be preset in the Programmer Some must be handled in the field as an operational part of the radio These are not included in the Programmer To program those APRS and GPS details that are available in the Programmer select Settings Radio menu settings from the menu at the top of the screen This can be accessed while you are on any of the spreadsheets of the program Once the Settings screen opens select the APRS GPS or APRS Beacon tab GPS Settings Altitude Set for feet or meters Datum Select GPS datum type Most operations including APRS use the default WGS84 however th
136. f it is onin normal mode it may act funny since the PTT line is active in the programming cabling If you are doing major editing turn the radio off and remove the cloning cable Then return to the Programmer for editing the file Once your editing is complete connect 2012 RT Systems Inc Radio Computer Data Transfer 161 the radio to the computer and complete the Send Data To process to transfer the changes to the radio Troubleshooting Nothing happens when press the button indicated on the second screen of the Get Data From process If this is nothing on the radio check that your keys are not locked The lock symbol appears on the screen with the word CLONE Simply press the power button briefly to unlock the keys Then press the Band button again to continue If this is nothing on the computer i e the transfer status bar does not appear and begin to fill check the cable connections between the radio and the computer Should the problem persist contact RT Systems for personal assistance 17 2 Communications Send Data To Radio Sends the contents of the current file and the settings file to the radio Note In the Version 4 Programmers you can have files open for several different radios at one time The Programmer can send a file only to the radio it is for The extension of the file tells you which radio it is for You can open and send a file created for one radio to another however you m
137. from files that are missing from the operating system These files would have been delivered through normal Windows updates to the operating system If the machine has been out of service for several years set it up with an Internet connection and Automatic Updates activated Let it sit for several days while it finds what it needs Once the updates are installed you will have no other problems related to the operating system relative to the programmer NACK ACK Error 2012 RT Systems Inc Troubleshooting F RTIOv4 Communication error Invalid character FFFFFFFF should have been NACK ACK Try again As ugly as this error appears it actually is only a generic message saying the Communication process failed Try again after reading the hints here Do NOT turn the radio off It may display Error Itis not terrible unhappy and is still in Clone Mode Cancel all Communications screens that are open in the programmer Open a new file File Open form the menu at the top of the screen Select Communications Get data from radio Doing Get Data from often gets the process going Skip the steps for putting the radio into Clone mode Itis already there Click OK Press the key as instructed to begin the process sometimes you need to press it twice once to return to Clone mode then again to begin the process Once Get data from is successful attempt Send data to In this scenario you
138. ginal radio Open the original file make changes make a new file whatever you need to do at this point for the ORIGINAL radio Save your file give ita good name to identify it for the original radio Execute Communications Send Data To radio to program your original radio Suppose you are only making changes to memory channel information for both of your original and D radios Open the file Make changes Save the file either same name or different your choice Check the titlebar Execute Communications Send Data To radio with the radio that matches that of the titlebar i e VX 8 Programmer to the original radio VX 8D Programmer to the D radio Close all files in the Programmer saving as necessary For the other radio Open New File File New Execute Communications Get Data From radio Be sure to Get Data From the other radio Notice that the designation in the titlebar changes now with or without the D as appropriate for the radio This should be different from what was there before you read the radio Open the file into which you made the changes Execute Communications Send Data To radio to program this radio This may seem a little clumsy given the radios appear to be so similar Suffice to say Appearances are deceiving What s New 2012 RT Systems Inc 14 VX8 and VX8D Programmer Help Changes to APRS settings These include e APRS Beacon new tab that cont
139. gnal Temperature Set the units for display of temperature within the case of the radio Wave Monitor Choose which information is to be included in the display All Both TX and RX signal are displayed in the wave form Rx Signal Receive audio signal is displayed in the wave form Tx Modulation Transmitted audio signal is displayed in the wave form Fast Tone Search Select to enable fast Tone Search Scanner speed Available speeds are Fast 2 5 tone sec when checked or Slow 1 25 tone sec when unchecked O 2012 RT Systems Inc Programming Other Set Menu ltems 137 FW Key Timer Select how long the function state remains available once the FW key is pressed This is the time during which a second key is pressed to access the secondary function of that key Home VFO Dial By default when the radio is operating in Home Channel mode turning the knob will switch operations to VFO As you continue to rotate the knob the radio will tune in VFO mode By setting this option to Disable the radio will remain in Home Channel mode even when the knob is turned HM RV Selects the function of the HM RV button middle row left on the face of the radio If used with the Func key i e Func then Hm Rv the opposite functionality is triggered in the radio Home One touch recall a Home channel Reverse Reverses the transmit and receive frequencies default Lock Lock Mode Enable locking as set in the Lock Mode field on thi
140. h memory channel A value that appears in this field is ignored by the radio if one of the tone modes that uses DCS is not activated DCS Polarity This field becomes available when the Tone Mode is set to DCS D Code T DCS or D Tone Select the function for the inverted DCS Tone See the section on DCS Tone Inversion in this Help for more details on this function of the radio Generally this options is left as the default RN TN for normal DCS tone operations The options for this function include RN TN Receive and transmit the Normal DCS Tone RI TN Receive the Inverted DCS Tone and transmit the Normal DCS Tone RB TN Receive both Normal and Inverted DCS Tones and transmit the Normal DCS Tone RN Tl Receive the Normal DCS Tone and transmit the Inverted DCS Tone RI Tl Receive and transmit the Inverted DCS Tone RB Tl Receive both Normal and Inverted DCS Tones and transmit the Inverted DCS Tone 2012 RT Systems Inc Programming Memory Channels 99 User CTCSS This field becomes active when Tone Mode is set toe User CTCSS Select a value between 300Hz and 3000Hz in 100 Hz steps The default is 1600Hz With User CTCSS selected as the Tone Mode the values that appear in the CTCSS and DCS tone columns are ignored by the radio Note User CTCSS is not a feature that allows you to program a custom tone for repeater use Alternately it is not to be used for the tone needed for repeater operations This is a spe
141. hat it can and ignores the rest Frequency Step Enter the value that will separate each of the frequencies in these channels Select 5kHz to 200 kHz Click OK and watch the screen fill Or Cancel to exit the process without change to your file The channels are inserted beginning at the currently selected channel i e if you have selected channel 40 the first channel will be added at channel 40 You are warned if a channel will be overwritten and given the ability to not overwrite or to cancel the process If you choose No to prevent loss of the current channel information the skipped frequency is entered into the next available space and not lost Sort Great for data management or to arrange your channels permanently for a special use The version 3 and Version 4 programmers have the ability to Undo a sort You can now sort the list on a given parameter touch up a group of entries then put the list back in its original order with the changes that you made When this option is selected you are presented with a window for selection of the options 2012 RT Systems Inc Easy Editing in the Grid 55 Sort by Receive Frequency Then sort by Cancel None y Sort Mode Channel Sort Selectioin Ascending Selected channels Decsending C All Channels Sort by Select a column for the initial sort Then Sort By Select a second column for a secondary sort Sort Mode Ascending for lowest to highest Descending f
142. hat your printout will look like and how many pages will be included before you send it to the printer This new option will help save lots of wasted paper 18 5 File Print Preview This new feature of the Version 3 programmers lets you preview the data to be printed before you waste paper sending it to the printer With the file open that you want to print select File Print Preview You will notice first that the screen changes Itis filled with the data that will be printed This is just a temporary change The order of your channels has not been changed in the file Then the screen opens to display the printed output you can expect 2012 RT Systems Inc 186 VX8 and VX8D Programmer Help E iC T7 Programmer IC T7 Untitled1 Ea lx previous amp Print E Setup Page 1of1 A Close 1C T7 Programmer IC T7 Uniled Notice at the top of the page you can see that your have X of X pages Making small changes can help reduce this number if it is not as you expect For example reduce the size of the comment column since it is not being used or hide it completely This move could save an additional page or pages by getting all the columns to fit on one page 2012 RT Systems Inc 2012 RT Systems Inc File Maintenance 187 E C T7 Programmer IC T7 Untitled1 Ea Next FS Previous Q Zoom Ej Print Setup Page 1 of 1 1 1 Pragiereras 1 1 Urtahas a a E a EE EE a
143. he current file during data input and before sending it to the radio Just as with a word processor it s an awful shame to lose everything if something happens to the computer during either of these processes If the name of the current file is Untitled in the main window title bar you will be 2012 RT Systems Inc File Maintenance 189 presented with a save file dialog and should enter a new filename Save As Es Save in FT 2600 Programmer 0250 Name Date modif Type Size Tags e fe Settings not coming from radio Recent Places am test Desktop Karin Computer dh Enter filename here Network Fe name E Save sstype Radio Data Files T2600 _ a Cancel The filename can be any combination of characters and spaces including numbers and letters When saving a file let the Programmer do the work All you need to enter is the name you want for the file 18 6 2 File Save As Saves the current file under a new name Used if you want to make a copy of the file that you re working in to maintain the original without the changes you re making now e f several files are open the one that is active is the current file This file will be saved with the Save As command e This is a good way to start another file for editing Changes made to this file do not affect the data in the original file e When this command is selected a save file dialog containing a list of O 2012 RT Systems Inc 190
144. he limitations of the radio It will allow you to enter any value in any space You will have to enter transmit and receive frequencies CTCSS tones and DCS codes carefully to be sure they are imported correctly to the radio e You will need to organize your data carefully The Programmer will import all the items from a single column as the same thing This can cause an odd split to be entered as Simplex or a non standard offset to be ignored if the data is not in a column labeled correctly or is mixed in with dissimilar data The Import File The Import function is designed to assimilate some if not all of the following pieces of information for use by the Programmer As radio features vary so will the information to be imported i e frequency ranges the way offsets are handled special options such as mask clock shift etc Channel Number ff your file has channel numbers and you opt to use this column during import your resulting file might not be what you expect e If the Overwrite existing channels option is checked The information will 2012 RT Systems Inc z6 VX8 and VX8D Programmer Help be inserted into the specific channel no matter what is in the file at that location now While the channel numbers can help to organize the information being imported it can result in data being overwritten in the process e If the Overwrite existing channels option is unchecked The information from the file being imported
145. he list User CTCSS PR Freq Activates the User programmed Reverse CTCSS Decoder which mutes the receiver when the matching tone is received When this option is selected the User CTCSS column becomes available Select a value between 300Hz and 3000Hz in 100 Hz steps The default is 1600Hz With User CTCSS selected as the Tone Mode the values that appear in the CTCSS and DCS tone columns are ignored by the radio Note User CTCSS is not a feature that allows you to program a custom tone for repeater use Alternately it is not to be used for the tone needed for repeater operations This is a special feature of the radio designed for a specific function rather than general use Pager Activates the Enhanced Paging and Code Squelch system Note When this option is selected none of the tone frequency columns on the main screen become available Tones are not set here for this function See the Enhanced Paging and Coded Squelch EPCS section of this Help for details on setting up the other options for this function Message Activates the Message feature See the section on this feature for details on setting up the other options for this function D Code Digital Coded Squelch mode is activated for transmission only With D selected as the Tone Mode the value that appears in the CTCSS Tone column is ignored by the radio The radio uses the DCS Code set in the DCS code column for transmissions only Reception is open for any signal
146. he memory channel information was not removed from the original A copy was made by the programmer for the conversion You can edit the file In this case it needs to be edited to be sure that memory channel 1 is programmed You can remove the blank channels if you want You can add others Alternately you can send this file to the radio just as it is other than channel 1 needing to be programmed with something allowable for the radio Once you have used this to program the FT 60 you can save the file or close without saving depending on your needs for the data 18 3 3 Opening a V3 or VA file Opening a file with the Version 3 programmer One Version 3 programmer installed O 2012 RT Systems Inc 182 VX8 and VX8D Programmer Help e Select FilejOpen from the menu at the top of the screen Nam als S85 Hz My Helmok Fie a nnee Fies of type e Select the file that you want to open from the list presented Click the Open O 2012 RT Systems Inc File Maintenance as button at the bottom right This files opens in the programmer Opening a file with the Version 3 programmer More than one Version 3 programmer installed e Select FilejOpen from the menu at the top of the screen Nwe ToreNode CTCSS tt et 5 cress AOS SALIA EA 0 me E None 6S Hz SHer 1003 Beti ON LHrremnencey ceys FTESDOCICADOO iPpperrercey acordes PTEZOO e A window opens listing the programmers installed
147. if you are using a customized sound for the bell The User defined ringers are set up on the Sounds tab of the Menu Settings section of the Programmer accessed from the main screen with Settings Radio Menu Settings Half Dev iation Check the box to engage Narrow 2 5 kHz Deviation as compared O 2012 RT Systems Inc Programming Memory Channels 123 to 5 kHz normally or when this option is off This change helps prevent interference with other stations in a crowded environment Note The receiver s IF filter bandwidth is not changed via this setting This setting will not enable the radio to perform on new commercial channels that are on 2 5kHz steps Those frequencies are reserved for commercial use and are not available to amateur equipment Clock Shift Shifts the internal reference frequency slightly to eliminate birdies that interfere on other channels Banks Check the box to assign a memory channel to a given Bank More details about using banks can be found in the Memory Banks section of this Help Note If you are assigning channels to banks after you have entered all of them use Bank Settings Settings Bank Settings or Ctrl B in the Programmer to make access to these columns easier by hiding several of the columns that are not needed for this operation To return all the columns to the screen select Settings Bank Settings again Comments An identifying comment up to 80 characters This information is not tra
148. ifferent people You can customize the global functions for the individual without having to recreate the frequency file Save the settings as part of the file with the memory information This might be best if you are programming different frequencies AND different global settings for different groups You might even want to use this option if you travel How you use your radio at home may differ from how it should function on the same frequency in another city Then each time you travel simply load the corresponding file into the radio to have frequency and global settings as you need them for where you re going The three options are discussed in detail below Once you decide set the Programmer for the option that you want on the Preferences screen Settings Preferences in the Programmer Set and Forget This is the default of the Programmer Not using the Radio Menu Settings Settings Radio Menu Settings settings can result in your radio acting funny every time you program it That s because something is getting reset in the radio by a setting in this file From the main screen of the Programmer select Settings Radio Menu Settings Explore these screens If you fear you have made changes you don t want click the X at the upper right of the Settings screen Answer No to the prompt to save Then click the X again to close The screen will close without saving anything you have done Details for the options on this page are
149. ile on your computer to be changed easily Then with minimal button pushing you can send the altered file back to the radio Hardware Requirements Hardware requirements for the Version 4 Programmers include e APC running Microsoft Windows XP Vista 32 or 64 bit and Windows 7 32 or 64 bit The programmer will NOT work on Windows 98 ME NT or 2000 e The correct computer interface cable as shown in the Radio to Computer Cabling section of this help 2012 RT Systems Inc as VX8 and VX8D Programmer Help 3 Getting Started Creating the file The Programmer gives you an easy way to access details for memory channels and other settings of the radio Open the programmer by clicking on the icon that was created during installation The programmer opens to a default file AN A Y file fdt Communications Settings Window Help Oc JDA amp 6 Sh m4 e BE ery al Doreen Pear Nene Tena Modo CCSS ocs pla ste Sun po00 e Simple e FPM v Mone xe 100 0 Hef gt High l siStHz el RESKSse88 le lt gt Memories y Lint y VEDA VIO 4 Mene Ready Note The default file contains memory channel information on several of the screens This information is needed by the radio to fill Spaces in its little brain You can change the default entries that you see but anything that is completed in the default file cannot be left blank The Programmer will help you w
150. imiters separators used in your file Import Step 2 of 4 Select the character that separates Select teld delimitar the data in the file being imported Deliratess E Tabj Semcolon Comma Space C quer Test Qual er Nore Treat consecutive delimiter 20 one a The selected character is the same as the one that appears here a H ete ep y gt ve ey ve ye ete The data in the file to be imported is separated by tabs semicolons commas space or other non text characters Select from the list at the top of the screen or enter the one you used Once you select the correct delimiter the data will properly separate into columns 2012 RT Systems Inc Importing a file 223 Import Step 2 of 4 Select the comma as the Delimiter Select bid deines to separate the data into columns Detiraters Segicdon Commal C Space C Ghee Tea Quaiier None I Teest consecutive debrer as ore KOLIN 147 0400 060007 7 W 1273 147 1000 0 6000 a m H 147 1200 0 6000 a 147 1400 706000 1472800 O6000 e 147 2300 0 6000 lt Touma 1 Column 2 Cole 3 Coun 4 Couma 5 Comm 6 Coun 7 0 6000 i es W wer Examine the data to be sure that it is ready for the Programmer to process Look at the data in the window Select the proper Text Qualifier if you have single or double quotes within a data field With quotes present the import
151. ing Other Set Menu Items 129 1 Radio Menu Settings COMMON coonnccccnononcnnnnnaninonnnanononnnnnrnnnnnnrrnnnnnnrrrrn nan rr rra nn rrrrnnnannnns 133 ARA E 3 iiicccsccisiccisscccscieieececevacecszectucetcovsecisseseseceuesussuccaseddesessvestedzeivuchervdcecessttncce cevvacissessdusetesi 143 Altitude Units OPPS Odia DAA Adi 135 Antenna SAAMI isc r ara Inia Ant dai sass sventecs aaa aa ARIAS iaa ie 133 Attenuator Broadcast Marine Weather cccsscceseceeeeeceseeeeeseeeesaeeeeaeeeeeeeeesaesasaaeeeseeeasaaeesaeeeseeenseeseesaeens 133 Audio Mute Level es ccsiicievessesiccassssccesscessssetancecevaceisssciugnsceusesivsetssuseuexdsausuicstectesvsivedietedcecevdzecevssiuces sdusasaventececeurss 133 Auto Power Off ws 134 Auto Re Pe ate Fe SIT A ante A apar aaa arasa S aiana 134 Barometric Units O SO tuviese 135 BlueTooth SOC sic cs caccasscecessivesscenceisevesevsvessieneacosseseassasucevestessasessasiesebeituasenseisevedevs aesigued ceastdseaszactecvesteenaseaabei seteat 134 Busy Channel Lock Out iii cuscvenvacesusececucevvstesvsstersccvenscedseesi cust sesetedusprerussdensscsesseee 135 BUSY LED no cian casacsvactessocs A E Tai 135 Channel Corte iii A A dd ii dicas 135 Dual Mono Receive 135 Fast Tone Search FW Key Timer mu 137 HMIRV a A a 137 AA AN 137 ANN 135 E oD Z oo Inha A EE A T caascs vaevceches cacsetscexsaacecavaessanscssncesdistasendenuantasdtesevestecssuseusaactccancetseacsseurs T 135 LED
152. ing Restart Time Scanning Resume Mode 140 Set Mode item display 136 Shortcut to File New menu 56 Shortcut to File Open 56 Shortcut to file for the same radio 56 Signal attenuation 100 111 121 Simple mode gt Easy channel entry Skip 99 111 121 S amp p a channel in your memory list where you want it 140 93 104 114 S Meter Symbol 136 Sort your memory channel list to bring like data together 54 Speaker Out 148 Split Frerquency Pair 94 105 115 Split Pair 94 105 115 Squelch 149 Step 99 111 121 Sub Band Mute 133 Switching to VFO mode via the knob while on a Home channel 137 TE Time that function key remains on once pressed 137 Tone Mode 96 108 118 254 VX8 and VX8D Programmer Help Tone Search Mute 142 Tone Search Speed 136 Transmission quality through mic gain adjustment 138 Transmit Frequency 93 105 115 Transmit Power 99 110 120 Triple Receive 135 Tying Global Settings to a Memory Channel File 30 U Unsort channel list tooriignal order after editing 55 User Beep Melody 149 User Beep Selection 149 User CTCSS 99 110 120 V VFo Scan Mode 141 Volume 149 Volume Key Mode 142 W Wave Monitor 136 Weather Channel Selection 143 Working with Programming Files Overview 28 2012 RT Systems Inc q Endnotes 2 after index O 2012 RT Systems Inc 2012 RT Systems Inc RT Systems Inc
153. ings Common tab Auto Power Off o ARTS Beep Interval Bank Link Bank Name Lockout Beep Edge Beep Level Beep Melod Beep Select Settings Radio Menu Settings Sounds tab User Beep Selection Bell Ringer Bell Select Mainpage Bell this option can be set for each memory channel Blue Tooth P Settings Radio Menu Settings Common tab P Code in 2012 RT Systems Inc wo E 5 O Ba Menu Item Cross Reference Code _ Bluetooth section Blue Tooth Settings Radio Menu Settings Common tab Bluetooth Set Busy LED Settings Radio Menu Settings Common tab Busy LED Ch Counter Settings Radio Menu Settings Common tab Channel Counter 20 Clock Shift Main Page Clock Shift this option can be set for each memory channel CW ID Settings Radio Menu Settings ARTS CW EAI tab CW ID The option is engaged from the face of the radio in CW Learning Training section 25 DC Voltage Not to be set from the Programmer Access this menu item from the face of the radio to check the current DC voltage available to the radio 26 DCS Code Main screen DCS This option can be set for each memory channel The option cannot be changed unless Tone Mode is set to a DCS selection that uses this code 27 DCS Main screen DCS Polarity This option cam be set for each Inversion memory channel The option cannot be changed unless Tone Mode is set to a DCS selection that uses this
154. into the radio file Options to customize details for radio file located on this screen zy X PRASSSMM KNX EH E ME e Name The TravelPlus list contains information that does not match directly to a column in the radio programmer One of the columns in the programmer accept data from these columns is the Name field Name in the programmer is the field that sets the alpha display on the radio Generally this display is limited to 5 8 characters depending on the radio other than the VX 8 that allows 16 characters By default the programmer associates Callsign from the TravelPlus list to Name in the programmer 2012 RT Systems Inc ARRL TravelPlus 197 You can change that association by selecting another column from those listed e Comment The TravelPlus list contains information that does not match directly to a column in the radio programmer One of the columns in the programmer accept data from these columns is the Comment field Comment in the programmer is a field of information that helps you while you work with the programmer This information does not transfer to the radio By default the programmer associates City from the TravelPlus list to Comment in the programmer You can change that association by selecting another column from those listed e Module Select the radio for which you want to create a file Select the radio Click Create 2 z X x x x n
155. io However the software 2012 RT Systems Inc o VX8 and VX8D Programmer Help will not enable transmission on these frequencies Transmission will be possible only if the radio has been properly modified Entering a Split pair When you are given information to program your radio you may be given a pair of frequencies one for transmit and a different one for receive This pair is referred to as a split Ina Yaesu radio a split is truly odd if the difference between the two frequencies is not evenly divisible by 50 If this is the case the pair can be entered with a plus or minus offset making the radio perform more efficiently lt also gives you back the Reverse function should you ever need to listen to the input frequency for the repeater If this is the case see the section on Using a Non Standard Offset Frequency Value just below in this Help section This information is easily entered into the Programmer and sent to the radio e First enter the Receive Frequency into that column of the Programmer This will be the frequency that you list on e Press Enter The Programmer will fill the remaining columns with default information which may or may not be right for your particular situation e The Transmit field will be active as indicated by the dark border Enter the Transmit Frequency from the information you have into this field Note Simply type the first number of that frequency The field will change without
156. io into clone mode differ with each model Pressing the wrong button will result in no response or the wrong response for the process The key sequence for sending data to the radio is different in all radios than that to Get Data From the radio 2012 RT Systems Inc Radio Computer Data Transfer 163 Send Data To VX 8 Plug the cable securely into the Speaker Mic jack on the top of the radio Press and hold the FW key while turning on the radio Verify the radio displays CLONE Press the Mode key on the radio Verify that the radio shows WAIT Click OK to start transfering the data Cancel Follow the steps on this screen When you click OK a progress bar appears letting you know that the process is being completed When the transfer is complete the transfer status window disappears and the Programmer returns to the Main Window With the radio off remove the cloning cable The radio is ready to power up and use with the newly programmed settings Troubleshooting Communications Get Data From Radio required first r Radio Programmer Your are required to do Communication Get Data From before you A can send data to the radio The first time you attempt to send your file to the radio this message may appear This indicates that you have not read the configuration of the radio into the O 2012 RT Systems Inc 164 VX8 and VX8D Programmer Help Programmer There
157. ions Emergency Operations The radio has an Emergency feature that must be activated from the face of the radio This feature would be helpful for finding someone lost but not incapacitated or for alerting others traveling with you of a danger in your vicinity The Emergency feature is activated by pressing and holding in the Hm RV key for one second When this is feature is engaged e The radio is placed on the UHF amateur band Home channel be sure everyone in the group is on the same frequency e The radio emits a loud Alarm sound the volume is controlled by the DIAI knob while pressing amp holding the VOL key e The LED of the radio flashes in white e The emergency feature can be disabled temporarily when the PTT is pressed allowing for transmission on the UHF Home channel frequency and e The emergency feature automatically begins again 2 seconds after the transmission has ended Using the settings of the Emergency option on the ARTS CW EAI tab of the menu settings screen Settings Radio Menu Settings ARTS CW EA select the alarm used when the Emergency function is engaged Available values include the following with a default of Beep and Strobe e Beep Strobe Loud alarm sounds along with flashing of the LED e Beep Loud Alarm sounds e Strobe The LED flashes bright white e Beam The LED glows continuously in white e Beam Beep A loud alarm sounds and the LED glows white continually O 201
158. is field Note Simply type the first number of that frequency The field will change without having to erase what is there e Press Enter e The Programmer will set the Offset Frequency and Offset Direction as needed for this pair Ignore these two columns The information in these two columns may change when the file is opened again if the offset can be figured to a 50kHz value and the direction set to plus or minus This gives you back functionality on the radio that is lost with a channel marked Split If you see this change ignore it The radio will function exactly the same when you use it with these different settings You are finished with this entry unless you need to enter Name Tone or other details for this memory channel Offset Frequency Standard offsets include 100 500 and 600 kHz and 1 0 1 6 1 7 3 0 5 0 7 6 and 99 0 MHz The default Offset Frequency depends on the band of the Receive Frequency being entered i e 2M Band is always 600 kHz 430 Band is always 5 0 MHz etc Although an Offset Frequency is displayed for every memory channel it is not used by the radio if the Offset direction is set to Simplex Yaesu radios can use an Offset Frequency of any value in 50 kHz steps i e any value ending in x00 or x50 where x is any digit from O to 9 with a Plus or Minus Offset Direction This gives you the ability to use the Reverse function of the radio although your frequency pair is not separated by a stan
159. issue Defective Cable Cables from RT Systems are 100 tested prior to packaging Even with this level of control occasionally a cable fails in the field Contact RT Systems tech support if to determine if the cable is at fault and a replacement is needed 2012 RT Systems Inc Troubleshooting 233 A replacement can be initiated when you send a copy of your receipt as proof of purchase and the issue has been diagnosed with a tech support representative at RT Systems In this case a replacement will be sent immediately with a prepaid label for return of the defective item The replacement will be sent to the address on the receipt lf the receipt is not available return the original cable for replacement A replacement cable will be sent immediately when the defective item is received at our location USB Driver Installation On some systems running Windows 2000 or early versions of XP the drivers for the cable will need to be installed manually This is a normal thing in the USB world and is easily done We are RT Systems will be happy to help you through this process With the USB cable detached from the computer start the New Hardware Wizard from the indication for the device in the Device Manager The drivers have been installed on your machine in the following directory C Program Files Common Files RT SystemsV4 RTDrivers USBComDrivers Drivers Run the New Hardware Wizard twice The first time use ftdibus ini in that dir
160. isting programming files rdf or icf files 18 3 1 Opening files from older programmers Opening existing programming files rdf or icf files The Version 3 or higher programmers can open a file created with an original RT Systems ADMS or WCS programmer for the same radio In this example a file for the Yaesu FT 60 that was created in the original ADMS 1J programmer an rdf file will be opened in the Version 3 programmer for the FT 60 This process is the same in the Version 4 programmers although the screens will look 2012 RT Systems Inc 172 VX8 and VX8D Programmer Help a little different Directory selections may vary on your system depending on your choices in the original programmer This example is designed based on defaults from the original programmers To open an existing file from the original programmer e Inthe V3 Programmer select File Open St AS iroot Dpat Dri Pres Brt Send Fle as ENa LHpemnencey aoyo FTESOONICADOO IHyperrancey aceptar FEEDO BTP vet Friece Sands Test C2000 e If you have several Version 3 programmers installed you will need to select FT 60 Radio Data File from the list in box that opens next This step is omitted if only one programmer is installed FT 50 Radio Data File Cancel FT 7800 Radio Data File Cancel FT 8000 Radio Data File e An Open Dialog appears O 2012 RT Systems Inc File Maintenance 173 Look jv E FT SD P
161. it even easier to create new files as you take pre programmed memory information from other files The name of the file currently being edited is shown in the title bar at the top of the window If the file has not yet been named Untitled appears The increments when multiple new files are being worked on Note Untitled the default filename should not be used for permanent file storage Even if you work in this file be sure to enter a different filename when you save The file being edited is referred to inthis help as the current file Creating a New Programming File Just like in any other editor there are several ways to create a new cloning file e You can open an existing file save it with a different filename e You can use the File New command as a starting point for a new blank file This file begins with default information for the radio The default information you see in the file is the same as what was in your radio when you bought it new e Another way to create a data file is to upload the contents of the radio with the Communications Get data from menu command After executing this command the current file will reflect the memory channels and feature settings of the radio Changes are easily made to these settings and the new file saved 2012 RT Systems Inc Using the Programmer Overview Note Not all the menu settings of the radio are associated with memory channels Many are global
162. ith this If information is required it will warn you when it is missing Enter a receive frequency O 2012 RT Systems Inc Getting Started 19 No need to erase Just click in the cell and type In this example we ll enter 147 240 MHz with standard offset a Name of Local and a tone of 100hz e Type one four seven period two four zero into the receive frequency column e Press Enter e The program completes much of the channel information with defaults The Transmit frequency Offset frequency Offset Direction and Operating Mode are completed This satisfies the Standard offset requirement from the original information VES Programmer W905 Untitled Sis fie Est Commuricaticm Settings Yindow Help D amp BSLLAN ra re O Oii Ord Ta r p d 5 Fre Diato Mode Nowe Tose Mode CTCSS oS Powe cho o vom pon mi N Bak Boaz Prk Boks Bok 5 t oe le N DO O eM lw Hora e 55 Jie eow ime le Cen Receive Transmit Offset Offset Operating Frequency quenc Frequency Direction Mode P1 147 24000 _ 147 84000 600 kHz Plus FM I Memories Lint VEO A VFO B Howe S asal e u aaa rape a a aa sags slew in a e po isl E 2 e Press tab or use your mouse to select the Name cell Type LOCAL You choose upper or lower case on many radios On others only upper case letters are allowed The programmer will help you If a letter or symbol will not
163. ity Revert Mode 139 Active Weather Channel 143 Add many frequencies at once 53 Adding a channel within a list 52 AF Dual 135 Alpha tag 96 107 117 AM Broadcast Antenna 133 APRS 151 ARTS Function Settings 143 Attenuation 100 111 121 Automatic Packet Reporting System 151 B Backlighting brightness 136 Band Edge Beep 148 Bank Linking 103 Bank Names 103 Banks 101 113 123 Barometric pressure offset 135 Barometric Unit display 135 Beep Level 148 Beep Mode 148 Bell 148 Bluetooth settings 134 C Channel Banks 101 113 123 Checkbox multi cell editing 47 Clear channel details 53 Clock Shift 101 113 123 Comments 101 113 123 Copy Memory Channel information 37 Creating a New Programming File 28 CTCSS Bell 148 CTCSS Tone 98 109 119 Cut to remove or delete 37 CW Learning and Training Modes 143 D DCS Bell 148 DCS Code 98 110 120 DCS Polarity 98 110 120 Delete channel details 53 Delete with cut 37 Deviation 101 113 122 Dual Receive 135 sP Easy editing in simple mode 50 Emergency Automatic Identification 145 sE Fast navigation with go to channel 52 Find item in your file 51 FM Broadcast Antenna 133 FM Broadcast output mode 149 FM Speaker Output 148 Function of dial while in Home mode 137 Function state timer 137 FW Key Timer 137 s GPS 151 H Half Deviation 101 113 122 Home VFO Dial 137 Incoming noise reduction 100 111 121 Insert channel 52 L Les
164. l be saved to this file and sent to the radio with this memory channel programming 16 1 Radio Menu Settings Common All the options shown on the Common tab of the Settings screen in the Programmer are listed here in alphabetical order rather than the order in which they appear on the screen This should make it easier to find the details for an option that you re curious about Antenna AM Select the antenna to be used for AM Broadcast listening Options include Bar amp Ext Use both the internal Bar antenna and the external rubber flex antenna Bar Antenna Use the internal Bar antenna only Note The Bar antenna is directional Rotate the radio for the best reception Antenna FM Select the antenna to be used for FM Broadcast listening Options include Ext Antenna Use the rubber flex antenna Earphone Use the earphone antenna Note When receiving a weak signal reception may be noisy Attenuator Broadcast Marine Weather Enables or disables the front end attenuator for operations in these three special memory channel bands The front end attenuator reduces all signals and noise which may make reception better in a noisy setting i e electric noise With this option On weaker signals may not be heard since the sensitivity of the radio is reduced in an effort to eliminate interference Audio Mute Level Automatically reduce the audio level of the Receive Only band when a signal is received on the Main ban
165. later 2012 RT Systems Inc 230 VX8 and VX8D Programmer Help 23 Troubleshooting Technical support is available from RT Systems at the times and number shown in the Contacting RT Systems of this help As issues are addressed by Techsupport personnel the issue and the result are often detailed on the FAQ page of www rtsystemsinc com Check there for additional information that might pertain to the exact issue you re seeing with your radio Detailed here are several of the more common problems that you may want to check before you contact technical support The data from the radio will overwrite this file Continue This message will be raised by the programmer when you select Communications Get data from radio with a file open that is not a new default file into which no entries have been made This message is warning you that you will replace any information you have entered with whatever is in the radio The whatever could be all blank channels Answer yes if you want to lose all the information that appears on the screen Answer no if you don t want to lose several hours of work spent creating the file on the screen To prevent loss of information first do File New to open a new default file Then while looking at that file do Communications Get data from radio and complete that process Your file will drop to the background and be protected from during this part of the process Once you complete Com
166. les will be presented e Select the file you want to use and click Open e Verify that this is the settings file that you want to use Check also that the proper filename appears in the bar at the top of the Menu Settings window 2012 RT Systems Inc s VX8 and VX8D Programmer Help e Select File Exit to close this screen These settings will be sent to the radio with each memory channel file until you change this file selection again Having multiple memory channel files and multiple global setting files gives you the ability to mix and match the features of your radio to suit your needs This makes it easy to customize the radio for a special event without disturbing the original programming files Then once the event is over simply reprogram the radio with the memory channel information and settings that you use everyday Tying Global Settings to a Memory Channel File The Version 3 and Version 4 programmers have the option of saving the global settings with the memory channel information This new feature is not the default for the programmer but may be valuable under certain programming circumstances i e programming many radios when you want to be absolutely certain that the settings and the frequencies are properly set for a given activity To contrast and compare the two Radio Menu Setting options e Use Separate file for menu settings default This is the default for the programmer This option is based on a
167. lities of the radio However the software will not enable transmission on these frequencies Transmission will be possible only if the radio has been properly modified Entering a Split pair When you are given information to program your radio you may be given a pair of frequencies one for transmit and a different one for receive This pair is referred to as a split Ina Yaesu radio a split is truly odd if the difference between the two frequencies is not evenly divisible by 50 If this is the case the pair can be entered with a plus or minus offset making the radio perform more efficiently It also gives you back the Reverse function should you ever need to listen to the input frequency for the repeater If this is the case see the section on Using a Non Standard Offset Frequency Value just below in this Help section 2012 RT Systems Inc 106 VX8 and VX8D Programmer Help This information is easily entered into the Programmer and sent to the radio e First enter the Receive Frequency into that column of the Programmer This will be the frequency that you list on e Press Enter The Programmer will fill the remaining columns with default information which may or may not be right for your particular situation e The Transmit field will be active as indicated by the dark border Enter the Transmit Frequency from the information you have into this field Note Simply type the first number of that frequency The field wi
168. ll be recognized by the programmer RT Systems programmers address over 50 different radios Of those some program through the speaker jack some through the mic jack some through the data jack and some through the CAT port These ports must be addressed by the correct cable for communications to be successful Be sure to use the correct cabling to address the radio being programmed Check the User s Manual for the radio if you are not sure where the port is on the radio that is specified in the programmer The cables for this particular radio are pictured in the Radio to Computer Cabling section of this help Specific to the FT 857 D and FT 897D The cable used for programming is the USB 62 cable with the 8 pin mini din plug This plug is attached to the CAT jack on the back of the radio Forcing this connector into the data port will ruin the plug and could damage the radio There have been cases where the power pin and the PTT were connected since you never know which pin will go which way when you force them out of place causing several hundred dollars in damage Check to be sure you are connecting the cable to the matching jack before forcing the pins into the holes At the time of this writing 2009 none of the Yaesu VHF UHF mobile radios used the USB 62 cable with its 8 pin plug We have seen this tried It will not work The mobile radios that program through the data jack require a 6 pin mini din connection on the O 2012 RT Syst
169. ll change without having to erase what is there e Press Enter e The Programmer will set the Offset Frequency and Offset Direction as needed for this pair Ignore these two columns The information in these two columns may change when the file is opened again if the offset can be figured to a 50kHz value and the direction set to plus or minus This gives you back functionality on the radio that is lost with a channel marked Split f you see this change ignore it The radio will function exactly the same when you use it with these different settings You are finished with this entry unless you need to enter Name Tone or other details for this memory channel Offset Frequency Standard offsets include 100 500 and 600 kHz and 1 0 1 6 1 7 3 0 5 0 7 6 and 99 0 MHz The default Offset Frequency depends on the band of the Receive Frequency being entered i e 2M Band is always 600 kHz 430 Band is always 5 0 MHz etc Although an Offset Frequency is displayed for every memory channel it is not used by the radio if the Offset direction is set to Simplex Yaesu radios can use an Offset Frequency of any value in 50 kHz steps i e any value ending in x00 or x50 where x is any digit from 0 to 9 with a Plus or Minus Offset Direction This gives you the ability to use the Reverse function of the radio although your frequency pair is not separated by a standard offset value Any offset frequency value is ignored by the radio if th
170. llow these steps since they are different from the Get Data from radio steps The radio does not change when OK clicked on the screen in the programmer never indicates receive There is no communication between the radio and the computer Check through the Cable issues to be sure you are using the right cable and that it is connected properly to the radio and to the computer The radio never goes to CLONE On many radios you hold buttons during power on to access a startup menu Once you select the clone option of the menu the radio is NOT YET IN CLONE MODE You press a key to accept the CLONE option When you press the button to access the startup menu option the radio does not change 1 The keys on the radio may be locked Turn the radio off then back onin normal mode to check for a lock symbol on the screen If the keys are locked unlock them Once unlocked power off the radio and begin the Communications process again 2 The key specified is touchy and responds if it is touched just the right way 2012 RT Systems Inc Hardware Error Troubleshooting This has been the case on several of the mobile radios Try again witha shorter or longer touch on the button When you get that touch just right the radio will respond 3 The wrong cable is being used This is true for several of the hand held radios that use the 4 pin plug If you attempt this process with a stereo plug the radio will not respond when you attempt
171. lue must be in the list User CTCSS PR Freq Activates the User programmed Reverse CTCSS Decoder which mutes the receiver when the matching tone is received When this option is selected the User CTCSS column becomes available Select a value between 300Hz and 3000HZz in 100 Hz steps The default is 1600Hz With User CTCSS selected as the Tone Mode the values that appear in the CTCSS and DCS tone columns are ignored by the radio Note User CTCSS is not a feature that allows you to program a custom tone for repeater use Alternately it is not to be used for the tone needed for repeater operations This is a special feature of the radio designed for a specific function rather than general use Pager Activates the Enhanced Paging and Code Squelch system Note When this option is selected none of the tone frequency columns on the main screen become available Tones are not set here for this function See the Enhanced Paging and Coded Squelch EPCS section of this Help for details on setting up the other options for this function Message Activates the Message feature See the section on this feature for details on setting up the other options for this function D Code Digital Coded Squelch mode is activated for transmission only With D selected as the Tone Mode the value that appears in the CTCSS Tone column is ignored by the radio The radio uses the DCS Code set in the DCS code column for transmissions only Reception is ope
172. lumns based on the headers that you have for the columns The programmer makes no assumptions and will set any non matched column to Ignore The data in an ignored column will not be used in this process 2012 RT Systems Inc Copying From an Excel Spreadsheet 209 morse O Ignore headers Click on column header to select Then select the column name from the Import Step 3 of 4 Pick the Column Pick the identifier Ignore Channel Number Transmit Frequency Ignore lgnore ignore _ Ignore Offset rection 147 345 600kHz Plus FM Operating Mode 146 955 600kHz Minus FM Name Show Name 147 060 600kHz Plus FM Tone Mode 146 625 600kHz Minus FM CTCSS 146 315 600kHz Minus FM DCS The column header changes to show your selection Be sure to identify each of the 2012 RT Systems Inc 210 VX8 and VX8D Programmer Help columns you want used The data in an ignored column will be set to defaults in the resulting file Your specifics will not be used Import Step 3 of 4 Columns Identified FP ARC PSL ARC MCARA HobeS WPB EC Click Next to continue 20 6 Step 6 Complete the options on the final screen and click Finish 2012 RT Systems Inc Copying From an Excel Spreadsheet 211 Import Step 4 of 4 Starting radio memory go Overwrite existing channels Show only selected columns Available Channels 999 E Show only valid frequencies Total Channels 1000 Chal Ste
173. lumns can be marked as hidden to customize printed output and then restored for additional data management Note Several columns are hidden and unhidden with the Simple Mode option found under Edit from the menu of the main screen Simple mode hides all but the columns required for memory channel operations When you leave Simple Mode all columns will again be visible Alternate row colors Select a color for the text Fore and or background Back for rows 2 4 6 etc This can help the readability of the spreadsheet Radio Menu Settings Sets the option for how the global settings of the radio are saved in the file These options for saving are explained in great detail in the Using the Programmer Overview section of this help Briefly the radio settings contained on the Settings screen are options that are not specific to any one memory channel The radio uses this setting whether it is in memory mode VFO ona Home channel or basically whenever it is on The settings for these options are sent automatically to the radio with the channel information The Settings can be saved as part of the channel data file or ina separate file As part of the channel data file they are reset to defaults each time you start a new file You set them to your specifications for the file that is being created As a separate file they are set once saved then sent to the radio with every saved channel data file The pros and cons of both
174. ly preceding it Repeat this command ona selected channel to walk it into place in your list Sequential channels can be selected and moved at once The group will move up one channel at a time The displaced memory channel will move to the end of the group being moved Move Down Ctrl D The ability to select a channel and have it change places with the channel immediately following it Repeat this command ona selected channel to walk it into place in your list Sequential channels can be selected and moved at once The group will move down one channel at a time The displaced memory channel will move to the top of the group being moved Add Frequency Range A convenient way to add lots of channels at once This is great for setting up a radio for scanning a certain range of channels When this option is selected you are presented with a window into which you enter the details of the channels to be entered 2012 RT Systems Inc s VX8 and VX8D Programmer Help Add Frequency List Starting Frequency MHz Number of channels 1 H Frequency Step 5 kHz v Enter Starting Frequency The value of the first frequency of the list to be entered Any allowable frequency of the radio being programmed Number of channels Enter the number of channels to be entered You can insert as few as 1 to as many as 1000 channels at once You are not warned if you select more than the number of memory channels The process just inserts all t
175. mer Select the row that is the first into which the data is to be pasted The Paste process will begin in that location with the first copied channel and continue in each channel after that with the rest of the channels that were copied 2012 RT Systems Inc Easy Editing in the Grid a He apo lejann alor laste Ea pa on he 1 1 3 3 e s 3 2 D 5 v 2 2 EJ a 3 EJ 5 v E 2 E 2 E Ala 5 aaparensasu sa From the menu at the top of the screen use your mouse to left click on Edit From the menu that appears use the mouse to left click on Paste You can also paste by pressing Ctrl V with the mouse pointing within the selected area i e just look at where the mouse pointer is on the screen It must by within the black area on the screen of the programmer for this keystroke to have any effect Or while pointing within the highlighted area right click and select Paste from the menu that opens O 2012 RT Systems Inc vr EEA Programmer Sarge Mode Erd Ga Dawid rest Qand Delete Channa Gor Oud Mews Up Vine own lets of deter Italy Cu Cub E D O Chhu culo todd Frequency barye Seat Lind owies WFO VX8 and VX8D Programmer Help Opewing Node 22222222222222 22 Howe The information is pasted into the selected channels 2012 RT Systems Inc Easy Editing in the Grid MES PIRPTRRARARAITTTRERLARAAATITRRI
176. mer Help Plus the offset frequency is added to the receive frequency Split for a non standard offset The user enters both the receive and transmit frequencies Operating Mode Assign FM AM or WFM as appropriate for the frequency Name Enter an Alpha Numeric tag up to 16 characters to a memory channel to provide an easy reminder of the function of a particular channel The Name is displayed automatically on the radio beneath the operating frequency The name will not be displayed if the radio is operated in Dual Receive mode Tone Mode Use of the tone systems of the radio allows for silent monitoring until a call is received with a corresponding tone Tone mode also allows access to repeaters that are made private with a PL tone The radio offers CTCSS Continuous Tone Coded Squelch System or DCS Digital Coded Squelch to be tailored to your particular needs Use of either of the tone systems requires two steps 1 Turning on the Tone Mode and 2 Selecting the CTCSS tone or DCS code from the values in the appropriate column The Tone Mode options are None No tone system activated Even if the CTCSS Tone or DCS Code column is set to the appropriate value transmissions will not get through unless this column is set to an appropriate function Tone CTCSS tone generator is activated for transmission only this mode is used for many if not most repeater operations When this option is selected the CTCSS column beco
177. mes available Select the tone frequency from those inthe list The value must be in the list With Tone selected as the Tone Mode the value that appears in the DCS code column is ignored by the radio TSql CTCSS tone squelch is activated for both transmission and reception only signals encoded with the matching tone will open the squelch Your radio will remain silent otherwise When this option is selected the CTCSS column becomes available Select the tone frequency from those in the list The value must be in the list The radio uses the frequency set in the CTCSS 2012 RT Systems Inc Programming Memory Channels 97 Tone column for both Encode and Decode transmission and reception With TSql selected as the Tone Mode the value that appears in the DCS code column is ignored by the radio DCS Digital Coded Squelch mode is activated for transmission and reception When this option is selected the DCS column becomes available Select the code from those in the list The value must be in the list The radio uses the DCS Code for both transmissions and reception With DCS selected as the Tone Mode the value that appears in the CTCSS tone column is ignored by the radio Rev CTCSS Rev Tone Activates the reverse CTCSS Decoder which mutes the receiver when a matching CTCSS tone is heard When this option is selected the CTCSS column becomes available Select the tone frequency from those in the list The value must be in t
178. munications Get data from radio return to your file a select the tab at the top of the page or b select File Open and open the file from the list presented if you closed it some time during the process Program cannot find cable 2012 RT Systems Inc Troubleshooting 231 r Communication Error Please check that the RT Systems cable is securely in the USB Port This message can appear when you are attempting to get data from the radio or send data to the radio There can be several causes The most common are The cable is not attached to the computer or you have the wrong programming cable attached The cable for this radio is pictured in the Computer to radio cabling section of this help The communications process was accessed too quickly after the cable was attached It can take some computers a minute or more to recognize the cable properly Give the computer a little more time and try again The problem may lie in the electronics of the cable If this is the first time you have attempted this process contact RT Systems for assistance This can be corrected easily in just a few minutes with the computer and an Internet connection Note This can be corrected using a machine that has an Internet connection that you don t plan to use for the programming software The software for the radio does not have to be installed to complete the correction HotSync the program for the Palm Pilot is running
179. n From the menu that opens select Copy It will appear that nothing has happened however Windows has copied the information e Use the mouse to click into the programmer file Note If you are using the programmer in full screen mode select Window from the menu then the programmer file name from the bottom of that list to switch between the two screens Alternately you can select Window Tile to have the programmer display the two windows equally in the main window 2012 RT Systems Inc ARRL TravelPlus 201 e Select the first channel in the file into which the information is to be pasted e Paste the information into the radio file With the mouse pointing at the highlighted channels right click and select Paste from the menu that opens OR with your mouse left click to select Edit from the menu at the top of the screen From the menu that opens select Paste e View the results The resulting file now contains only those selected pieces of information from the TravelPlus list along with all the original information of that file T KAN Prognerser EDU _ Me t Comment deta Oiu Weers Mer Cee IRA SOLAN A ennome x ae TE vanea COS inp PM ww w soe A oca nes mies A re ow awe l go ios is E a A n fa a a IA ew lean oe Gies Giles Gee een Shoe see eke Eb i El gt E moos DP ASANO none oe be EN E mr mu wen a on ser E ae COL moe or see
180. n for any signal T DCS CTCSS encode tone squelch is activated for transmission and Digital Coded Squelch for reception With T DCS selected as the Tone Mode the values that appear in the CTCSS Tone and DCS Code columns are both used by the radio The CTCSS Tone selection is used for transmissions while the DCS Code selection is used for reception Be sure that you set both the CTCSS Tone and the DCS Code once this option is selected D Tone Digital Coded Squelch is activated for transmission and CTCSS decode for reception With D TSQL selected as the Tone Mode the values that appear in the CTCSS Tone and DCS Code columns are both used by the radio The CTCSS Tone selection is used for reception while the DCS Code selection is used for transmission Be sure that you set both the CTCSS Tone and the DCS Code once this option is selected CTCSS Tone This field is available when Tone Mode is set to Tone T Sql Rev 2012 RT Systems Inc mo VX8 and VX8D Programmer Help CTCSS TDCS orD Tone Select one of 50 tone frequencies to be used in the Encode or Decode modes This value is set independently for each memory channel A value that appears in this field is ignored by the radio if one of the tone modes that uses CTCSS is not activated DCS Code This field becomes active when Tone Mode is set to DCS D Code T DCS or D Tone Select one of the 104 codes available for use when the radio is in DCS mode This value is set inde
181. n identifier up to 8 characters for those in the group who will be sending and receiving messages This can be name callsign or other identifying information Check the box next to the one that is your personal identification Message Select List Enter the text to be sent up to 16 characters Check the box next to the one that you want to send O 2012 RT Systems Inc Programming Other Set Menu Items 147 16 3 1 Messages In Detail The radio provides a message feature which sends a text message up to 16 characters instead of sending a voice transmission Twenty 20 different messages can be programmed into memory for easy access When one is selected to be sent the text and your ID are sent NOTE The Message Feature requires that all members 1 Use the VX 3R FTM 10R or VX 8 transceiver a combination of these three can be used 2 Store the same message text into the Message Select List 3 Store the same member text into the same location of the Message Member List and 4 Set the same frequency Messages cannot be sent through repeaters To set up messages 2012 RT Systems Inc 1 Enter the frequency for the channel This must be a simplex channel as repeaters do not pass this information 2 Set the Tone Mode to Message 3 Set the Bell option optional in the Bell column on the main page of the Programmer 4 Access the Menu Settings screen through the Settings Radio Menu Setting menu
182. n of the transceivers The beep alerts you to the location status of the radios The available options include OFF for silent operations IN RANGE for a beep only when the radios first confirm that you are within range The radios then remain silent as long as you remain within range ALWAYS for a beep to sound every time a polling transmission is received from the other station ARTS Enable Check to activate ARTS functionality The radio will operate in ARTS mode immediately after it is programmed with this file Note Remember this is an option of the Settings file that programs the radio with every file of frequencies You might prefer to turn this option on and off from the face of the radio thus gaining more control over this functionality To engage ARTS from the face of the radio press the FW then the 4 key To disengage ARTS press the 4 key ARTS Interval Set the frequency for ARTS polling Available options are 25 seconds for maximum battery conservation or 15 seconds for extra security Note ARTS will not function if the PTT is locked Transmissions during the ARTS function whether or not accompanied by voice transmissions require that you ID every 10 minutes to satisfy FCC identification requirements Remember to enter your callsign into the CW ID field and check Enable to engage this part of the function CW ID The callsign name or other identifying information up to 16 characters that will be tr
183. ncludes an Enhanced CTCSS tone encoder decoder and a dedicated microprocessor providing paging and selective calling features This allows you to place a call to a specific station Paging and to receive calls of your choice directed only to you Code Squelch The paging and code squelch systems use two pairs of CTCSS tones which are stored in the pager memories Basically your receiver remains silent until it receives the CTCSS tone pair that matches those stored in the Receiving Pager Memory The squelch then opens so the caller is heard and the paging ringer immediately sounds if activated When you press the PTT to transmit the CTCSS tone pair that is stored in the Transmitting Pager Memory will be transmitted automatically allowing you to talk to the other radio On the paged radio the Coded Squelch will cease automatically after the incoming page ends This allows you to talk to others with this functionality and others on the same frequency without this functionality this person should have no tone mode set for the channel Meanwhile on the paging radio the Coded Squelch will be disabled when the PTT is released after the initial paging transmission Conversation can continue between all parties and others on the frequency Note If there are others in the group without the Enhanced Paging and Coded Squelch system they cannot initiate a call to you since they cannot transmit the tones needed to open the squelch on the radios
184. ncy to be skipped during scanning Use of these can make VFO scanning much more efficient 1 MHz 2 MHz 5 MHz Scanning will include frequencies within the designated bandwidth PMS X Scanning includes only those memory channels within the selected PMS frequency pair The PMS Programmed Memory Scan limits are set as Limit Memories in the Programmer Smart Search Set the Smart Search sweep option Available values are Single and Continuous as described below The default is Single Single The transceiver sweeps the current band once in each direction starting at the current frequency All channels with activity up to 15 in each direction are loaded into the Smart Search memories Whether or not all the memories are filled the search is halted after one sweep in each direction Continuous The transceiver sweeps in each direction starting at the current frequency continuously until all the Smart Search memories are filled Spec trum Analyzer Sets the sweep mode for the spectrum analyzer function The Spectrum Analyzer presents a visual representation of activity above and below the current operating frequency 1 Time The sweep covers the band once Continuous The transceiver sweeps the current band repeatedly Full Time The transceiver sweeps the current band repeatedly with audio remaining on the current operating frequency 2012 RT Systems Inc 12 VX8 and VX8D Programmer Help Split Tone Ena
185. nding to the radio Getting data from the radio is a less critical process that can help get communications established The radio must be connected to the computer with the proper cables for that radio See Radio to Computer Cabling in this Help for details and pictures Should the problem persist contact RT Systems for personal assistance 17 3 Comport Setup The VX 8 Programmer uses the RT Systems USB cable No comport setup is required Troubleshooting When select Communications Send Data To get the following error Communication Error Could not find a USB cable attached The only cable configuration that works with the VX 8 Version 4 RT Systems Programmers is the RT Systems USB 59 cable 2012 RT Systems Inc 166 VX8 and VX8D Programmer Help Be sure to give the computer enough time to do its internal setup once the cable is attached On some machines this can take up to a minute a long time in computer time Once the cable is ready for use the program will continue into the steps for transferring data between the radio and the computer 17 4 Radio to Computer Cabling The radio must be connected to the computer with the proper cables for that radio The cable is included in the ADMS VX8 kit with the RT Systems software This USB 59 cable is easily identified by its blue color its unique 7 pin plug on one end of the cable and the RT Systems logo on the USB end of the cable O 2012 RT Systems
186. nformation in the filename may come in handy Execute Communications Send Data To radio These two files work together to program your D radio Create other memory channel files and other settings files as needed for your activities Suppose you have a new D radio in addition to your original VX 8 radio Close the file that opens with the Programmer Create a new file File New Execute Communications Get Data From radio with the D radio Re open the original file Execute Communications Send Data To for the D radio If you use options from the Settings menu access Settings Radio Menu Settings Make necessary changes Save the Settings file for the new radio Suggestion Name this settings file something different from what you named the original settings file if nothing else put a D at the end of the file name Now these two files will work together to program your D radio Execute Communications Send Data To for the D radio When later you want to reprogram your original VX 8 radio Close all programming files saving as necessary Create a new file File New Execute Communications Get Data From radio with your original radio O 2012 RT Systems Inc Programming Memory Channels 91 Open the original file make changes make a new file whatever you need to do at this point for the ORIGINAL radio Save your file give ita good name to identify it for the original radio Execute Communi
187. ng on the channel If after you program the radio with this file it receives continuously or does not receive an expected signal increase or reduce the squelch for the channel Bell During CTCSS Decode TSql DCS Message or Enhanced Paging Code Squelch Pager operation you may set up the radio so a ringing bell sound or user programmed beep alerts you to an incoming call Select from Off no ring On pre programmed sound or one of three User defined ringers Using this feature requires several things 1 You are using CTCSS Decode T Sql DCS Message or Enhanced Paging amp Code Squelch Pager set up for this channel e CTCSS Decode T Sql and DCS are set up from the main page of the Programmer by turning on the Tone Mode and setting the CTCSS frequency or DCS code e Paging amp Pager requires more setup See the Enhanced Paging and Code Squelch section of this Help for more details e Message required more setup See the Message section located O 2012 RT Systems Inc Programming Memory Channels 101 under Programming Other Radio Set Items of this Help for details 2 You select a Bell option from those listed on the main page of the Programmer 3 You set the action of the bell number of rings or Continuous from the Sounds page of the Menu Settings screen accessed from the Settings Radio Menu Settings item in the menu at the top of the main screen A fourth step is required if you are using a cus
188. ngers are set up on the Sounds tab of the Menu Settings section of the Programmer accessed from the main screen with Settings Radio Menu Settings O 2012 RT Systems Inc Programming Memory Channels 113 Half Dev iation Check the box to engage Narrow 2 5 kHz Deviation as compared to 5 kHz normally or when this option is off This change helps prevent interference with other stations in a crowded environment Note The receiver s IF filter bandwidth is not changed via this setting This setting will not enable the radio to perform on new commercial channels that are on 2 5kHz steps Those frequencies are reserved for commercial use and are not available to amateur equipment Clock Shift Shifts the internal reference frequency slightly to eliminate birdies that interfere on other channels Banks Check the box to assign a memory channel to a given Bank More details about using banks can be found in the Memory Banks section of this Help Note If you are assigning channels to banks after you have entered all of them use Bank Settings Settings Bank Settings or Ctrl B in the Programmer to make access to these columns easier by hiding several of the columns that are not needed for this operation To return all the columns to the screen select Settings Bank Settings again Comments An identifying comment up to 80 characters This information is not transferred to the radio 15 1 3 1 DCS Code Inversion Polarity The DC
189. ngs Common tab Weather Alert in Weather section APRS GPS Set Mode APRS AF Settings Radio Menu Settings ARPS GPS tab AF Dual check Dual box APRS Not accessible to the Programmer Fixed value 2012 RT Systems Inc Menu Item Cross Reference EA APRS Beacon tab D Version Beacon Filter es fee ee rec Modem Flash check box ee eee Text check box a ee Ringer Msg_ check box ia Settings Radio Menu Settings ARPS GPS tab NonD Version Bcon APRS Beacon tab D Version Beacon Ringer check box AS Settings Radio Menu Settings ARPS GPS tab NonD Version APRS Beacon tab D Version APRS Units Dela Settings Radio Menu Settings ARPS GPS tab NonD Version Interval APRS Beacon tab D Version Beacon Interval Settings Radio Menu Settings ARPS GPS tab NonD Version Stats Txt APRS Beacon tab D Version Beacon Status Text K Beacon Tx Settings Radio Menu Settings ARPS GPS tab NonD Version APRS Beacon tab D Version Beacon TX Ee Digi Path Settings Radio Menu Settings ARPS GPS tab NonD Version APRS Beacon tab D Version Digi Path ee This options is saan ita inthe D Version to include more i GPS Datum Seinge Radio en Settings TARPS GPS tab Datum inGPS section Set GPS section Position Speed in GPS section Settings Radio Menu Settings ARPS GPS tab Position Comment _ Comment Settings Radio Menu Settings ARPS Beacon tab Smart Beacon B
190. nnel who may have become injured in a debris field In such cases if another searcher sends out a unique command CTCSS tone pair the radio of the incapacitated party who may not be able to speak or even press the PTT switch will automatically cause the injured party s radio to transmit so others may perform direction finding and effect a rescue The callsign of the incapacitated person will also be transmitted to assist the rescue team For more details on setting the EAI features see the Emergency Automatic ID section of this Help Weather Memories Ten NOAA weather channel frequencies are programmed into memory for easy access A name alpha tag can be added to identify the channel A scan option can be set for each These channels can be organized into banks Any channel can be put into none one multiple or all banks Note If you are working in a reduced screen you may need to click the right arrow button at the lower left of the screen to scroll to this tab To program the Weather memory select the Weather Memories tab at the bottom of the screen 15 5 VFO Memories The VFO memories provide temporary memory channels for quick access The VFO memory is temporary since it is lost when the radio is tuned while in VFO mode Note Remember the VFO memory is temporary The programmed frequencies appear immediately after the file is sent to the radio When the radio is manually tuned in VFO mode the programmed freq
191. nsferred to the radio 15 2 Skip Memories The radio has 99 Frequency Skip Memories numbered 901 999 The Skip memories are those that are to be omitted during VFO scanning These may include the frequency of a spurious emission from a television or a radio station that you would rather not hear The same information as that entered for any memory channel is entered for these See the Regular Memory Channels section for the details about the information to be entered Note Although these memory channels can be programmed with all the details of a regular memory channel the only important data here 2012 RT Systems Inc 1 4 VX8 and VX8D Programmer Help 15 3 15 4 is the Receive Frequency since the channel is being used only for VFO memory skip If these channels are programmed they can be accessed as regular memory channels notice that they are included when you turn the dial when tuning in memory mode Be careful using them as memory channels These frequencies WILL BE SKIPPED when scanning in VFO Limit Memories This feature allows you to set sub band limits for either scanning or manual VFO operation For example you might wish to set up a limit in North America of 144 300 MHz to 148 000 MHZ so as to prevent encroachment into the SSB CW Weak Signal portion of the band below 144 300 MHz Then when you scan using this limit pair you will begin scanning at 144 300 and continue to scan up to 148 000 b
192. ntified channel is then written to a special Channel Counter memory The preset range is to be set with this option in the Programmer Select the range to be used in this operation Note This Channel Counter is designed to provide an indication of the operating frequency of the incoming signal or one that is close enough that the user can tune to the exact frequency of the other station The feature is not designed as a way to geta precise determination of the other station s frequency Altitude Units Offset Set the units for display of altitude Enter the elevation for your location for the radio to use as an offset to calculate altitude at any other location Barometric Units Offset Set the units for display of barometric pressure Enter the current calibrated barometric pressure for your location Dual Mono Triple Set the radio for Dual Mono or Triple receive Triple receive is the AF Dual function of the radio that allows you to monitor two ham band frequencies while listening to the broadcast band Note Names will NOT be displayed when the radio is in Dual mode To switch between modes on the radio press the B key next to the display Lamp Control the backlighting when a key is pressed Options are for the lamp to remain lit for 2 to 10 seconds with a key press to be on continuously or to not light at any time LCD Contrast Set to control how dark the type is on the display of the radio Note If this option is
193. odes available for use when the radio is in DCS mode This value is set independently for each memory channel A value that appears in this field is ignored by the radio if one of the tone modes that uses DCS is not activated DCS Polarity This field becomes available when the Tone Mode is set to DCS D Code T DCS or D Tone Select the function for the inverted DCS Tone See the section on DCS Tone Inversion in this Help for more details on this function of the radio Generally this options is left as the default RN TN for normal DCS tone operations The options for this function include RN TN Receive and transmit the Normal DCS Tone RI TN Receive the Inverted DCS Tone and transmit the Normal DCS Tone RB TN Receive both Normal and Inverted DCS Tones and transmit the Normal DCS Tone RN Tl Receive the Normal DCS Tone and transmit the Inverted DCS Tone RI Tl Receive and transmit the Inverted DCS Tone RB Tl Receive both Normal and Inverted DCS Tones and transmit the Inverted DCS Tone User CTCSS This field becomes active when Tone Mode is set toe User CTCSS Select a value between 300Hz and 3000Hz in 100 Hz steps The default is 1600Hz With User CTCSS selected as the Tone Mode the values that appear in the CTCSS and DCS tone columns are ignored by the radio Note User CTCSS is not a feature that allows you to program a custom tone for repeater use Alternately it is not to be used for the tone needed for repea
194. ogrammer you can enter details for frequencies outside the transmission abilities of the radio However the software will not enable transmission on these frequencies Transmission will be possible only if the radio has been properly modified Entering a Split pair When you are given information to program your radio you may be given a pair of frequencies one for transmit and a different one for receive This pair is referred to as a split Ina Yaesu radio a split is truly odd if the difference between the two frequencies is not evenly divisible by 50 If this is the case the pair can be entered with a plus or minus offset making the radio perform more efficiently It also gives you back the Reverse function should you ever need to listen to the input frequency for the repeater If this is the case see the section on Using a Non Standard Offset Frequency Value just below in this Help section This information is easily entered into the Programmer and sent to the radio 2012 RT Systems Inc 116 VX8 and VX8D Programmer Help e First enter the Receive Frequency into that column of the Programmer This will be the frequency that you list on e Press Enter The Programmer will fill the remaining columns with default information which may or may not be right for your particular situation e The Transmit field will be active as indicated by the dark border Enter the Transmit Frequency from the information you have into th
195. on this computer Hotsync immediately takes control of an available comport Since the RT Systems programming cable establishes a comport Hotsync takes control before you have a chance to use it Look for the icon red and blue arrows chasing each other in the tray at the right of the task bar If found right click and exit That program will load again when you re boot your computer You will need to disable this software any time you program your radio Interference from other cables attached The Programmer is designed to find the cable to be used by this radio for programming This process is done through special identifying numbers programmed into the electronics of the USB connector The process looks at each USB device attached Other items attached especially other programming cables may cause the programmer to wrongly identify the cable it 2012 RT Systems Inc 232 VX8 and VX8D Programmer Help must use for a specific radio Two different errors can occur in this configuration Either the programmer will report that the cable is not attached to the USB port or the Communications process will not respond since the data being transferred from the radio you did press all the right buttons is traveling along a cable other than that the programmer is connected to Interference from other applications Your radio is not the only device you attach to your computer for programming or data interchange Pads Pods Palm Pilots and
196. on this machine Select the radio from the list that will be programmed by this file being opened O 2012 RT Systems Inc 14 VX8 and VX8D Programmer Help FT 50 Radio Data File FT 60 Radio Data File FT 7800 Radio Data File FT 8000 Radio Data File e A Windows Open dialog appears with a list of the files for that radio Look jr E FT50 Progiarirer 3 Eicon tea F160 Bf lors of data FTEO My Recert Documents Deshtop ig My Competes io femme Y Cancel Fiesoflyps Rado Data Fdez FTO e Select the file that you want to open from the list presented Click the Open button at the bottom right This files opens in the programmer 2012 RT Systems Inc File Maintenance 185 18 4 File Print Prints the Memory channel information of the displayed page of the current file i e if you are on the memories tab the memory channel information is printed Similarly if you are on the VFO tab the VFO channel information is printed e When this command is selected a print dialog will give you the opportunity to setup your printer e Hidden columns are not printed A printout can be customized including increasing type size by deliberately hiding columns before printing To hide column select Settings Preferences from the menu of the programmer e Only memory channels that are programmed are printed Your printout will not include the blank channels in the file e Use Print Preview to see w
197. only the channels in that one bank 15 1 3 Bell The Main window of the Programmer is designed for memory channel entry All details associated with the memory channels are programmed from this screen These are not all the functions of the radio Other features are set once for the radio to use no matter which memory channel you re on These items are set on the Settings screen accessed through Settings Radio Menu Settings from the menu at the top of the screen Inthe VX 8 there are LOTS of other options to be set Columns continue off the right side of the window Use the bar at the bottom of the screen to move to these columns or press ENTER to step through each column Columns can be hidden using the selections of the Preferences screen Select Settings Preferences in the menu to access this screen These columns remain hidden in this and any other file new or otherwise until they are unhidden on the Preferences screen Information is entered into these columns automatically when a new frequency is entered The information in a hidden column is always there it is just not visible Make programming extra easy Try Simple Mode in the software for even less to enter Simple Mode is a quick memory channel entry In Simple Mode only the columns needed for the minimum information to set up the channel are shown on the screen Extra columns are hidden and filled with default information To put the screen into Simple Mode select Edit
198. ons The default is Moni Moni Open the squelch to allow weak signals to be heard T Call Activated a 1750 Hz burst tone used for repeater access in many countries Password Enter and enable a password for the radio The Programmer will not allow you to set a blank password Enable will become active once an entry is made for the password Note You cannot put the radio with a password into CLONE mode 2012 RT Systems Inc Programming Other Set Menu tems 139 Be sure you know how to turn this option off from the face of the radio to again be able to access CLONE mode for programming Priority Revert Activates the Priority Revert Mode During Priority Channel operations also referred to as Dual Watch the Priority channel is accessible even when activity is not present on that channel With this feature enabled and priority monitoring engaged pressing the PTT switch instantly reverts operations to the Priority Channel To set the Priority Channel using the Programmer e Choose the memory channel that you want as the priority channel by clicking on the number for that channel You will notice that the entire line becomes highlighted indicating the selection e Select Edit from the menu at the top of the screen then Set Priority Channel from the menu that opens e You will notice a P appears next to the channel number giving you clear indication that this is now your Priority Channel selection e The same P
199. operations are used on this amateur equipment This explanation is offered to help you understand where the radios differ How Radios Work A little here about how radios work As for an allowable frequency three factors are important Reference Frequency Reference Step and Step Reference Frequency Based on its internal electronics the radio uses a value based off the frequency you enter along with the Reference Frequency Oscillator to generate the desired frequency Reference Step The difference between any two Reference Frequencies This value is set as a part of the internal workings of the radio It cannot be changed Step The difference between two frequencies displayed on the face of the radio when the tuning knob is turned while operating in VFO mode Reference step and Step work in conjunction with each other allowing or prohibiting you from tuning to a given frequency Commercial radios have a Reference Step of 2 5 kHz Amateur radios are generally designed with Reference Steps of 5 6 25 12 5 9 only AM and 8 333333 air band only kHz While a few models have all these Reference Steps many more remain with only Reference Steps of 5 and 12 5 kHz These two are sufficient for accessing any repeater in the Amateur Bands While in the mathematics of things there will be frequencies in the commercial bands that match the available Reference Steps of Amateur radios the Step of the Amateur radio will not allow you to
200. option DTMF Delay ea oe T Radio Menu Settings DTMF Internet tab DTMF oe ree in DTMF Settings section Manual in DTMF Settings section Settings Radio Menu Settings DTMF Internet tab Channel in DTMF Settings section Speed in DTMF Settings section Settings Radio Menu Settings ARTS CW EAI tab Enable in EAI section Settings Radio Menu Settings ARTS CW EAI tab Time in EAI section Select Signal in Emergency section Menu Extended Menu On Time Main screen Half Dev This option can be set for each memory Deviation channel Home VFO Settings Radio Menu Settings Common tab Home VFO Dial Reverse Auto Mode in Internet Wires Settings section Not in the Programmer Engaged from the face of the radio 2012 RT Systems Inc e VX8 and VX8D Programmer Help Number in Internet Wires Settings section Settings Radio Menu Settings Common tab Internet Key in Programmable Key Assignments section in Internet Wires Settings section Select Name table in Internet Wires Settings section 46 Lamp Settings Radio Menu Settings Common tab Lamp in Display section Not in the Programmer The option is set on the radio Settings Radio Menu Settings Common tab LCD Contrast in Contrast Display section Settings Radio Menu Settings Common tab LCD Dimmer in Display section LED Light Not in Programmer Engaged from the face of the radio 51 Lock Settings Radio
201. or highest to lowest Channel Sort Selection Selected Channels to sort only a group form the file All Channels to sort all the channels in the file If the result is not quite what you expected select the Undo Sort option to return the list to the point you left it last Always save your file before you sort At the very worst you can exit the file without saving to return to the order of that last save Blank memory channels are always sorted to the top of bottom of the list based on the Ascending or Descending selection Different fields sort differently If a field is a text field in one programmer and a drop down list in another the sort results will be different It has to do with how the computer interprets the values in these different types of fields While this was present in the older programmers it should not be a problem in the Version 3 or Version 4 programmers where the fields are consistent between the radio programmers Unsort For use after sorting to return the list to the last saved order Use Sort and Unsort to easily edit channels with the same info that needs to be changed Sort to bring those channels together Edit the details see cell editing Then unsort to return the list to the last saved order with the edits in place 2012 RT Systems Inc s VX8 and VX8D Programmer Help Quick File Access Commands Ctrl 0 Control zero Open existing file for same radio Calls the Open dialog for the prog
202. ormation found in a factory fresh radio is contained in the file Anywhere this information is displayed it can be changed Memory information is easily entered in a spreadsheet style layout You can view rearrange eliminate or edit these entries Memory channel 1 must be programmed in most radios VFOs and Home channels must be programmed Memory channel 1 and limit memory channels VFO and Call channels must each contain a frequency appropriate for the band The programmer checks for missing data when Send data to is executed Columns not regularly used are easily hidden with the selections under Settings Preferences View Preferences in earlier versions Customize your screen for the information you use most often Radio Menu Settings Global menu settings which in earlier programmers occupied the opening screen are now entered on a Settings screen accessed under Settings Radio Menu Settings View Settings in earlier versions Here options are set for menu settings of the radio that do not change with each memory channel These settings affect the radio whether it is in memory mode or VFO mode The Radio Menu Settings screens contain check boxes for single click settings and easily filled blanks for personalized options Once configured these Settings are saved for use by new files There is no longer a need to reset the options in each new file or to begin a file from an existing one Note Radio Option Settings including Lock
203. pendently for each memory channel A value that appears in this field is ignored by the radio if one of the tone modes that uses DCS is not activated DCS Polarity This field becomes available when the Tone Mode is set to DCS D Code T DCS or D Tone Select the function for the inverted DCS Tone See the section on DCS Tone Inversion in this Help for more details on this function of the radio Generally this options is left as the default RN TN for normal DCS tone operations The options for this function include RN TN Receive and transmit the Normal DCS Tone RI TN Receive the Inverted DCS Tone and transmit the Normal DCS Tone RB TN Receive both Normal and Inverted DCS Tones and transmit the Normal DCS Tone RN Ti Receive the Normal DCS Tone and transmit the Inverted DCS Tone RI Tl Receive and transmit the Inverted DCS Tone RB Tl Receive both Normal and Inverted DCS Tones and transmit the Inverted DCS Tone User CTCSS This field becomes active when Tone Mode is set toe User CTCSS Select a value between 300Hz and 3000Hz in 100 Hz steps The default is 1600Hz With User CTCSS selected as the Tone Mode the values that appear in the CTCSS and DCS tone columns are ignored by the radio Note User CTCSS is not a feature that allows you to programa custom tone for repeater use Alternately it is not to be used for the tone needed for repeater operations This is a special feature of the radio designed for a sp
204. process completes e With the radio off connect the other end of the cable to the radio e From the menu at the top of the main window select Communications Get data from A screen will open with details about this process specific to your radio e Follow these steps carefully until this process is complete e Open the file that you created earlier To open a file select File Open from the menu at the top Select your file from those in the list Or with Version 4 your file may already be open in the other tab 2012 RT Systems Inc Getting Started 25 Wit regener Octet a Ele ft Commuricstiom Setting Window Help Os MB 3 2 an i Tor Mode ctcss OCS pasi OGS Each tab is a different file Fu aw Oe 13 a z a u D a 7 a a x Ej R Es q 7 na sa ty rok M bOn Manos y Elio Lint Bl WFO VEO How y Maine Bako y SW Byta y Wester Second Communications Send data to e When your file is ready select Communications Send data to from the menu at the top of the main screen A screen will open with details about this process specific to the radio e Follow the steps carefully to complete this process and program the radio Read the screen carefully The steps are often different from those used to get data from the radio e Turn off the power Disconnect the programming cable from the radio Your radio may still be in VFO mode after it is progr
205. process will handle all the data incorrectly resulting in a blank file Once selected the quotes are removed and the data appears as shown Import Step 2 of 4 Select the quote 1 as the Text Qualifier Select field delimiters to eliminate the quoted from the data Deimiters Tab C Semicon Comma C Space C Other Tec Quaifier ES I Tesst consecutive delimier as one Column 1 Column 2 Column 3 Column 4 Column 5 Column 6 Column 7 Coh 147 0200 0 5000 127 3 127 147 0400 0500 127 3 2 147 1000 0 5000 127 3 147 1200 0 6000 147 1400 06000 147 2400 0 5000 147 2800 06000 lt Click Next to continue 21 4 Import Step 3 Import Step 3 of 4 Identify the data to the Programmer O 2012 RT Systems Inc 224 VX8 and VX8D Programmer Help The Programmer will make an attempt to identify the information in your file In this step of the process you can make corrections to the assignments the Programmer has made and identify other columns that you want imported import Step 3 of 4 Ock on column header to select Then select the column name trom the dropdown ist To skip a column during import set hesderto ingore 0 6000 0 6000 0 6000 0 6000 0 6000 D6000 For the columns to be imported select the header of the column the little grey box just above the column then select the proper identifier from the drop down list at the top of the screen Import Step
206. racted from the receive frequency Plus the offset frequency is added to the receive frequency Split for a non standard offset The user enters both the receive and transmit frequencies Operating Mode Assign FM AM or WFM as appropriate for the frequency Name Enter an Alpha Numeric tag up to 16 characters to a memory channel to provide an easy reminder of the function of a particular channel The Name is displayed automatically on the radio beneath the operating frequency The name will not be displayed if the radio is operated in Dual Receive mode O 2012 RT Systems Inc ns VX8 and VX8D Programmer Help Tone Mode Use of the tone systems of the radio allows for silent monitoring until a call is received with a corresponding tone Tone mode also allows access to repeaters that are made private with a PL tone The radio offers CTCSS Continuous Tone Coded Squelch System or DCS Digital Coded Squelch to be tailored to your particular needs Use of either of the tone systems requires two steps 1 Turning on the Tone Mode and 2 Selecting the CTCSS tone or DCS code from the values in the appropriate column The Tone Mode options are None No tone system activated Even if the CTCSS Tone or DCS Code column is set to the appropriate value transmissions will not get through unless this column is set to an appropriate function Tone CTCSS tone generator is activated for transmission only this mode is used for m
207. rammer being used allowing you to select a file to be opened without having to select the file type first This is especially helpful when several programmers are loaded on one system i e Lets you select another FT 7800 file without having to select that file type first from the open box Ctrl O Control letter O File Open Presents the box from which the file type is selected just as File Open Select the type of file to be opened The programmer will look in the location of that last file for that particular file type i e you can open an FT 60 file while working with the FT 7800 programmer as long as you have the Version 3 or Version 4 module for the FT 60 With both open you can copy and paste between the files or send each to the proper radio without having to close and reopen the Version 3 or Version 4 programmers separately Ctrl M Automatically create a new file for the programmer being used Eliminates having to select the file type first Ctrl N File New Presents the box from which the file type is selected just as in File New in the menu Select the file type for the programmer to create a new file for that radio the same as the one you re working with now or for a different radio for which you have the Version 3 or Version 4 module O 2012 RT Systems Inc s VX8 and VX8D Programmer Help 7 Screen Appearance and Default Options The screen of the programmer can be customized to make data entry tha
208. record lf the Notepad display has orderly lines of legible data separated by commas it is ready for use by the programmer It is fine if you see two commas right together The process can handle a blank field Saving an Excel file for import If you work on a file in Excel for import to the programmer that file must be saved as a comma delimited file before you leave Excel The Programmer cannot import an Excel file with all its formatting codes What it can work with is the flat file output of that file e In Excel select File Save as e In the Save As window change the Save as Type to CSV comma 2012 RT Systems Inc Importing a file 215 delimited csv e Enter a file name for the output file Pay attention to the drive and directory to which the file is being saved You will need to be able to find the file later for use during import e Excel will raise a warning s about worksheets and formatting that will be lost if the file is saved in this format Answer to the affirmative OK or Yes to the message s eliminating the formatting is exactly what you want e When you exit Excel you will be asked again if you want to save the csv file If you have made no changes since you lost saved answer No If you have made changes answer Yes and proceed through the warnings again to save the file again Limitations for use of another commercial spreadsheet program include e The spreadsheet program will know none of t
209. rectly or indirectly by this document Printed September 2012 4 VX8 and VX8D Programmer Help Table of Contents Foreword 9 Part VX 8 and VX 8D Comparison 11 T Wiha tis NOW seis oes cess ca a li 13 Part Il What Is the Radio Programmer 16 Part Ill Getting Started 18 Part IV Using the Programmer Overview 28 1 Working with Programming Filesl oooncconnnnnonnnnoncnnnnncnonanononnnnnncnnnnnnnnnannnanrrnnnnnnannrnnnnanos 28 2 Creating a New Programming File oomccconccoonncconnncnonnncnnnncnnnncnonnnnnnnennnnnnnnnernnnncrnnarenanes 28 3 Multiple Global Settings Files e 29 4 Tying a Global Settings File to a Memory Channel Fil occcoconnccccnnnnnnnnnnnnnnnnnnnnnnnnnnannnnnns 30 Part V Viewing and Changing Programming Files 33 Part VI Easy Editing in the Grid 36 Part VII Screen Appearance and Default Options 58 Part VIII Split Screen for Multiple Files 63 Part IX Menu Item Cross Reference 66 PartX Auto Range Transponder System 74 Part XI Emergency Automatic ID 77 Part XII Emergency Operations 80 Part XIII Enhanced Paging and Coded Squelch 83 Part XIV Internet WIRES Functionality 87 Part XV Programming Memory Channels 89 1 Regular Memory Channnels c ccccccceeeee eee ee eeeeee ee eeae nese eeeeeeeeaeeeee ee eeaaeeseeeeeseeeseaeeseeeenes 92 ATCO MU ALOR ETTA EET E T T Banks aen Memory Banks Bell co ia CIOCK SNIE ERETTE A TT A O TA COMMENTS ii E EE EA E EE E a didcins 2012 RT Systems
210. requency to be a valid memory channel The Programmer makes no assumptions about the information available If a piece of information is omitted the Programmer imports the memory as a simplex channel and fills other fields with defaults This data can be entered in any order You will identify the specifics to the Programmer during the Import process If you find after several entries that you need another column for additional information simply add it at the end The Programmer will correct the order when it imports Save the data in your file often to prevent loss Be sure to save the file as text with delimiters Separators rather than as a worksheet of the program in which you are working The Programmer cannot use a worksheet created by the other program To save as a text file select File Save in the spreadsheet program In the Save file window select a different file type from the selection at the bottom of the screen Acceptable formats are those that specify Text i e cvs or txt file extension Exit the spreadsheet program Your file is ready to be imported into the Programmer Changes can be made within the Programmer after you import the data Import Step 1 In the Programmer select File Import 2012 RT Systems Inc Importing a file 221 From the Import Radio File dialog that opens select the file to be opened Import Radio File wd Look in E Kon e ag E 2500 rdf FS Step cey 2 1C208 dat E st
211. rogiaririer A comtea F160 ud So lors of data FTEO My Recert Documents Desktop Mp Oocunerts 3 My Competes My Hamak Fie pare Places Flez of type Rado Data Files FETO e Since the Version 3 programmer is geared to look in its own directory we need to find the original file to be opened We must change filing cabinet drawers as the old analogy was described Use your mouse to left click the down arrow to the right of the Look In box A directory listing appears The one highlighted in the list simply indicates the drawer you are innow Do not be afraid This is only a list from which we will make a selection You cannot hurt anything with these steps and actions Look jee E9 FT50 Progearaeer Y My Recari Docurerts G3 Dekio D Hy Documents D Yaew FT 60 Progress Y Hy Computer s Local Dik iC iD DYDACD FW Orive D lt gt Loca Dak E SS con Yaesu Vaes Y SE SoucaCods on todhocompuiel ED Shared Document Dr Documents KB My Sharing Folders E Testsers Documerts SY Hy Network Places Programas Shote 1do es on Yaesu Yacu Fles ofp Rado Data Fae FT60 e Use your mouse to left click on Local Disk C in the list On your machine this wording can vary a little In general you re looking for that C to know you ve made the correct selection 2012 RT Systems Inc 174 VX8 and VX8D Programmer Help Pa Fe Hy Recert Documents 3 Desitop 53 My Competes
212. s Fies of type e When the contents of that directory are displayed it probably will be blank as shown You have done nothing wrong This is normal The process is still looking for an FT 60 file From the Files of type field at the bottom of the screen the one highlighted blue in the figure above select All files O 2012 RT Systems Inc 180 VX8 and VX8D Programmer Help Look jac E 10 181 Progress a Callteb Tortel 4d IC TSl resd kT8L My Recet OlfsatFrequency icTS1 Documents E test2 re B FS rect ref teste icros Desktop Mp Docunerts 43 My Cosgates My Helwork Places e A listing will appear with more than just the file that you re looking for Everything in that directory is listed Your file will be in the list Select the file from the list Lookin E9 10 181 Programes Collted Torma 0c Te resd cT 81 OtfsetFrequency icT FA test2 rt SS test rf teste ioros Fie pame Oset requere wT Cancel Files of type las Filer 1 1 e Click Open in the lower right corner e The resulting file contains frequencies that can be sent to the FT 60 The blanks represent frequencies that were removed during the conversion These frequencies would be invalid for the FT 60 O 2012 RT Systems Inc File Maintenance er 1 megio 195 01000 anoo 431 00000 155500 145 55000 MFTO 147 22800 10 A Creation of this file did not disturb the original file T
213. s heard just as the ARTS signal is heard During the ARTS function your radio will transmit a signal every 15 or 25 seconds This transmission includes the DCS tone The receiving radio will hear only the signal with the tone An extraneous signal that lacks the tone will not interfere with the ARTS functionality between these two radios The other radio does the same in a comparable time period As long as the two remain within range the displays will show INRANGE Should one of the radios move too far from the other three beeps will sound and the display changes to OUT RANGE Once with radios are again within range a single beep will sound and the display will change to INRANGE Whether or not you talk the ARTS function continues until you de activate it During ARTS operation it is impossible to change the operating frequency or other settings of the radio This prevents accidental loss of contact You must terminate ARTS operations to resume normal operations including access to menu settings on the radio The radio can be turned off even with ARTS engaged This will cause an out of range situation for other radios Options for ARTS operations are entered on the ARTS CW EAI tab of the Radio 2012 RT Systems Inc Auto Range Transponder System Menu Settings screen of the Programmer ARTS Beep The ARTS function can operate either silently or audibly Silently the display shows the INRANGE or OUT RANGE conditio
214. s option can be set for each Freq memory channel RX AF Dual Settings Radio Menu Settings Common tab RX AF Dual Main screen Operating Mode This option can be set for each memory channel Settings Radio Menu Settings Common tab Rx Save Save Tx Settings Radio Menu Settings Common tab Tx Save check box Settings Radio Menu Settings Common tab Lamp in Scanning section Settings Radio Menu Settings Common tab Restart Time in Start Scanning section Settings Radio Menu Settings Common tab Resume Mode Resume in Scanning section 84 Sensor Settings Radio Menu Settings Common tab Sensor in Displa Display section 85 Sensor Not something to be programmed This is the display of he maton information from an internal sensor of the radio Access it as needed to check the internal workings of the radio en CSR in Display section Format in Display section Search eee ene Symbol in Display section O acetals cd Output Analyzer SQL Level Settings Radio Menu Settings Sounds tab Squelch This 2012 RT Systems Inc VX8 and VX8D Programmer Help A E can be set differently for several conditions The o Parmer reser los oler onthe Saind ab presents all those options on the Sounds tab EE S Meter Mainscreen eee 94 SQL Split Settings Radio Menu Settings Common tab Split Tone check box Note This options is engaged automatically by the Programmer for channels that hav
215. s screen A lock appears on the screen to let you know when the lock is activated Set the lockout combination for the Lock function Select from Key The front panel keys are locked Dial The dial on the top panel is locked Key Dial Both the keypad and dial are locked PTT The PTT switch is locked and transmission is not possible Key PTT Both the keys and the PTT switch are locked Dial PTT Both the dial and the PTT switch are locked All The front panel keys the top panel dial and the PTT switch are all locked Beware if you lock the keys you will not be able to communicate with the radio from the Programmer Although the radio will come on in CLONE mode it will not respond to the key press needed for the remainder of the process The keys are unlocked by pressing the power button ever so briefly Watch for the lock symbol to disappear from the face of the radio indicating that the lock is off This can be done while the radio is in CLONE mode Mem ory Fast Step Select the number of channels to advance with each click of the knob while tuning in memory mode To access Fast Step tuning press Func key then 2012 RT Systems Inc 138 VX8 and VX8D Programmer Help turn the knob while the F appears on the screen Note You might want to change the FW Key Timer option to give you more time to tune if you used the Fast Step feature often Memory Protect When this feature is set to on checked the memor
216. s to enter in Simple Mode 93 104 114 O 2012 RT Systems Inc Index 253 Make the software simple to use 93 104 114 Making the screen characters darker 135 Mask 99 111 121 Memory Banks 101 113 123 Memory Channel Comment 101 113 123 Memory Channel Copy 37 Memory Channel saving 138 Memory Fast Step 137 Memory Scan Mode 140 Mic gain 138 Microphone Gain 138 Minimum details to enter for memory channel 50 Mono Receive 135 Morse Code Training 143 Move channel details up one channel at the time 53 Move from 1 to 100 without scrolling 52 Move memory channel info to a higher memory channel 53 Multiple channel movement in memory recal 137 My Key 139 N Name 96 107 117 O Odd Split 94 105 115 Offset Direction 95 107 117 Offset Frequency 94 106 116 On Off Timers 142 Open dialog shortcut 56 Operating Mode 96 107 117 Paging Codes 145 Paste copied channel informaion 40 Power Out 99 110 120 PR Frequency 99 110 120 Priority Revert Mode 139 Priority Time 139 Programmable Key Assignment 139 2012 RT Systems Inc O Quick memory channel editing in simple mode 50 Quickly add memory channel frequencies 53 R Rearrange the order of existing channels by sorting 54 Rearrange your memory channels 53 Receive Band Suto Mute 133 Receive Frequency 983 105 115 Restart Time for scanning 140 LS Saving memory channel to next available or next highest spot in list 138 Scann
217. se the same memory channel files for an original or a D radio The two radios CANNOT USE THE SAME SETTING FILES This is where all the differences are found If you are using one radio this will not pose a problem If you are using an original AND a new D model radio there will be extra steps and file management for programming the two Note Whenever you do File New and open a new VX 8 radio programming file the Programmer will tell you which radio it is ready to address In the titlebar at the top of the Programmer VX 8 Programmer for the original or VX 8D Programmer for the new D model will be shown The presence of the D lets you know that the Programmer is ready to send data to the D radio If you plan to work on your Original VX 8 radio and the titlebar shows VX 8D execute Communications Get Data From radio into a new file using the original VX 8 radio This will switch the Programmer back to being dedicated to the original VX 8 Suppose you have a new D radio as your only VX 8 radio You are working within one Programmer for one radio No extra attention to file management is needed other than the initial Get Data From radio process O 2012 RT Systems Inc 12 VX8 and VX8D Programmer Help Execute Communications Get Data From radio with your new radio Save the file Use this file to enter frequency information Make any other files that you want You will always have all the details of this radio avail
218. set frequency value is ignored by the radio if the offset direction is set to Simplex or Split A nonstandard Offset Frequency value is entered by typing that value into the Offset Frequency field after the Receive Frequency has been entered for that channel Then select Plus or Minus in the Offset Direction column and watch the Programmer calculate the Transmit Frequency Values would be entered as an exact number including the decimal to denote kHz e Given the pair 146 650 and 147 300 e The Offset Frequency entered would be 650 decimal six five zero Without the decimal an error is raised in the Programmer that a valid Offset Frequency should be entered e The Offset Direction would be set to Plus As another example e The pair 147 255 and 145 940 could not be entered with an Offset Frequency and an Offset Direction e The resulting offset for this pair us 1 315 MHz which is not on a 50 kHz step does not divide evenly by 50 e This pair requires entry of both the Receive and Transmit frequency with the Offset Direction set to Split e inthis case any value that appears in the Offset Frequency column will be ignored by the radio when it uses this memory channel Offset Direction This function denotes how the receive and transmit frequency differ Simplex transmit and receive frequencies are the same Minus the offset is subtracted from the receive frequency 2012 RT Systems Inc 96 VX8 and VX8D Program
219. set to a value less than 20 you will not see the characters on the display at all If set higher than 30 the background will darken along with the characters 2012 RT Systems Inc 136 VX8 and VX8D Programmer Help LED Dimmer Control the brightness of the backlighting Level 1 turns the backlighting off Level 4 is the brightest Sensor Choose information to be included as part of the display Choices include DC Battery voltage and battery type default Temperature Current temperature inside the radio s case Wave A visual representation of the RX and TX audio wave form Barometer Barometric pressure or current location Altitude Altitude at current location Off Disables sensor display Current time will be displayed Note Sensor information is displayed only if the radio is in mono receive mode with small characters not large characters as stated in the Users Manual Set Mode Cursor Choose the cursor thatis displayed beside the option once you are into and editing an item of the set mode Set Mode Format Control access to the Set Mode items List The Set Mode items are listed alphabetically by name and number Item The Set Mode items are shown one at a time with the default for that particular item The display advances through the items in alphabetical order S Meter Symbol Select the symbol to be used for S meter display The S meter displays the strength of a received for transmitted si
220. settings that affect the radio during memory or VFO operations These settings are handled in the fields found on the screen accessed under Settings Radio Menu Settings The global settings will be read from the radio however by default these settings are not saved with the file Select Settings Radio Menu Settings to view change and save these settings Once saved these global settings will be sent to the radio every time it is programmed If they are not saved default settings will be sent to the radio with the memory programming To save these Global settings e Select Settings Radio Menu Settings in the menu on the main screen The Settings screen opens e Verify that your settings are as you want them or make changes e From the top of this screen select File Save A Save dialog opens into which you enter a filename Enter the name for this file and click Save e Exit the Settings screen by selecting File Exit This settings file is now available for use by any saved file that you send to your radio Creating and using multiple Global settings files There may be global settings of the radio that you want configured differently for different activities You can make changes to your settings file and save it separately To select a settings file for use e Select Settings Radio Menu Settings from the main page of the programmer e From the Radio Menu Settings screen select File Open A list of settings fi
221. ss is complete This could indicate several things Most of those are specific to the radio The most general error is not an error in programming but the need to put the radio into Memory mode once programming is complete Many of the radios return to VFO when they are programmed Press the V M or MR or DM key on the radio See the manual for your specific model to identify the key press that changes the radio from VFO to memory mode tt will be detailed there Once in memory mode the information programmed will 2012 RT Systems Inc Radio Computer Data Transfer 165 be available for use Several of the Yaesu radios truly are not programmed when the download process is complete These radios have encountered an error during the programming process Try the process again It it continues to fail first be sure you are using the latest version of the Programmer by updating from the Software Updates link of the website If the problem persists send the file that you are attempting to send to the radio We will examine it for any problem that might exist in the data Check the cabling between the radio and the computer by disconnecting and reconnecting at all connections Try the process again If you have problems sending a certain file to the radio Cancel the Send Data To process and execute Get Data From Be sure to open a New file File New into which the data will be read This prevents loss of data in the file that you are se
222. ssrersesee Sesegssesygsssesss om or SANNING ial 3 Save in Ji vos Programmer Name _ Date modif Type i DCSTest a Reader Testi a VX8 General Travel and Entertainment Recent Places 2012 RT Systems Inc Getting Started 23 Enter a filename You can be as descriptive as you want 256 characters including spaces upper and lower letters and much more to describe this file The programmer will enter the extension so it can find the file later Once you complete this part of the process the program will open the last file when it starts up Even More Radio Functions Today s radios can do so much Many of the features are not a part of the details for a memory channel These other options are set once for the radio to use no matter what channel you re operating on memory channel limit memory VFO or Home channel These options may include but are not limited to Lock mode ARTS details display brightness and color DTMF memories scan resume options and many others Select Settings Radio Menu settings from the menu at the top of the main screen to access these options The Settings screen opens to a page with check boxes list boxes and edit fields A sample Settings screen would look like this r 7 Menu Settings for VX 8 vem Close External Setting Files Help f Common ARTS Cw EAl Messages Sounds DTMF Intemet VFO and
223. t EVERYTHING that is going to the radio is in this one file select this option Second if you are programming similar but not identical memory channel information for people who use their radios very differently keeping radio menu settings in the file with the memory channel information would reduce the chance of programming a radio incorrectly Keep menu settings and frequencies in a single file option e From the main screen of the Programmer select Settings Preferences e Click OK to close this screen e From the main screen of the Programmer select Settings Radio Menu Settings e Make changes as needed e Click Close Apply changes and close if you want to save or Discard all changes and close if you think you re made mistakes and need to return to the last time you saved this file Remember with each new file created the Radio Menu Settings return to factory defaults You must set these option for EACH memory channel file created Another feature of this option is the ability to use the settings from a settings file that you already created e From the Menu Settings screen select External Setting Files e From that menu select Open e Select a settings file from the list presented The settings file must be for the same radio e To set these to be used in this file select Close Apply changes and close O 2012 RT Systems Inc Programming Other Set Menu Items 133 The settings from the other file wil
224. t much easier Options for screen appearance are accessed under Settings Preferences from the menu on the main screen of the programmer This screen appears when that option is selected Preferences Grid Display Memory Delauks Maik the columns to hide Freeze Columns fi J Alteinate row colors oat as fiset Direction 2 Row perling Mode 3 Rows 4 Rond how Name one Mode TCSS cs Rado Menu Settings tep Use Separate fie for a Shift menu settings KF Owe kip C Keep menu settings and kip HM 2 frequencies in a single lle kip HM 3 1th hh EEE RE REBUT Freeze Columns The option to freeze can be applied to any or all columns Select the number of columns to remain on the screen at all times as you scroll to the right of the spreadsheet Having these columns always available for reference can be a great help for identifying the memory channel being edited Hidden Columns Mark the columns to hide Selected columns can be marked as hidden which removes them from the screen display During editing these fields are completed with default 2012 RT Systems Inc Screen Appearance and Default Options 59 information for the radio This option is a global setting and will affect every file new or existing In an existing file the data in these columns is not lost it is simply not displayed In a new file a hidden column is filled with a default value Hidden column data is not printed Co
225. t the left Regular Memory Channels The Main window of the Programmer is designed for memory channel entry All details associated with the memory channels are programmed from this screen These are not all the functions of the radio Other features are set once for the radio to use no matter which memory channel you re on These items are set on the Settings screen accessed through Settings Radio Menu Settings from the menu at the top of the screen In the VX 8 there are LOTS of other options to be set O 2012 RT Systems Inc Programming Memory Channels 93 Columns continue off the right side of the window Use the bar at the bottom of the screen to move to these columns or press ENTER to step through each column Columns can be hidden using the selections of the Preferences screen Select Settings Preferences in the menu to access this screen These columns remain hidden in this and any other file new or otherwise until they are unhidden on the Preferences screen Information is entered into these columns automatically when a new frequency is entered The information in a hidden column is always there it is just not visible Make programming extra easy Try Simple Mode in the software for even less to enter Simple Mode is a quick memory channel entry In Simple Mode only the columns needed for the minimum information to set up the channel are shown on the screen Extra columns are hidden and filled with default information
226. te separate files for unique applications such as travel emergency activities or special events These files can contain different settings such as memories power management features and DTMF numbers for each purpose The Programmer also gives you the ability to read a configuration from the radio The configuration would be stored in a file on your computer to be changed easily Then wth minimal button pushing you can send the altered file back to program the radio VX8 and VX8D Programmer Help 2012 RT Systems Inc All rights reserved No part of this work may be reproduced in any form or by any means graphic electronic or mechanical including photocopying recording taping or information storage and retrieval systems for other than your own use without the written permission of the publisher Products that are referred to in this document may be either trademarks and or registered trademarks of the respective owners The publisher and the author make no claim to these trademarks While every precaution has been taken in the preparation of this document the publisher and the author assume no responsibility for errors or omissions or for damages resulting from the use of information contained in this documentor from the use of programs and source code that may accompanyit In no event shall the publisher and the author be liable for anyloss of profit or any other commercial damage caused or alleged to have been caused di
227. ter operations This is a special feature of the radio designed for a specific function rather than general use Tx Power The output power can be set individually set for each memory channel to address the exact needs of each operation Select Low1 Low2 Low3 or High for each memory channel The power out for each of these settings varies for this radio 2012 RT Systems Inc Programming Memory Channels 124 depending on its power source battery or DC power supply and frequency See the User s manual for the specifics Skip Marks selected memory channel to be skipped during scanning These channels remain available for manual selection by turning the knob Off The channel will be scanned for activity whenever scanning is done Skip The channel will be skipped P Scan The channel is included in a special scanning group These channels are scanned when scanning is begun on a P scan channel Step The frequency that the radio is on changes by the value of the step when tuning manually This value is used by the radio in Memory Tune mode This value is not critical in memory mode since the original memory channel frequency can be retrieved by exiting Memory Tune mode In VFO this value could keep you from returning to your original frequency Select from Auto 5 6 25 10 12 5 15 20 25 50 or 100 kHz steps as needed Note There are some special exceptions for setting step including e AM Broadcast band only step values of 9 0
228. the 8 button The S2 icon that indicates use of this feature will disappear from the screen once the feature is disabled 2012 RT Systems Inc Programming Memory Channels 89 15 Programming Memory Channels Working with the original VX 8 and the new VX 8D in the Programmer Upon visual inspection of the original VX 8 and the new VX 8D itis impossible to tell the two apart unless you check the label under the battery Identical in appearance and similar in features the differences in the features become significant when programming the radio with the software Their little brains are significantly different when viewed by the Programmer The ADMS VX8 Programmer contains details for both the original VX 8 and the new VX 8D which will be referred to in this Help as Original and D for clarity To access the added features for the VX 8D execute Communications Get Data From radio Only the radio can tell the Programmer that itis a D model If you are switching between an original and a new D radio execute Communications Get Data From radio into a new file each time you switch between radios to let the Programmer know which radio is being addressed The Programmer makes it possible to use the same memory channel files for an original ora D radio The two radios CANNOT USE THE SAME SETTING FILES This is where all the differences are found If you are using one radio this will not pose a problem If you are using
229. the Lock symbol on the screen Unlock the keys and try again You have pressed the designated key too long or not long enough Try again until you get the feel for the process Yaesu Radio does not change to Tx or Clone Out when button is pressed Many Yaesu radios have a key sequence that starts Clone mode without having to select that option from a startup menu the radio simply comes on in Clone mode 2012 RT Systems Inc 236 VX8 and VX8D Programmer Help With CLONE displayed on the face of the radio a button is pressed to begin communications If the radio comes on displaying CLONE but then is unresponsive when the button is pressed to begin i e the screen does not change from Clone check these two common causes First be sure you are using the correct cabling for the radio being programmed If an adapter was included with the kit use it Check that the keys are not locked To check turn the radio off Turn it back on in normal mode and check for the Lock symbol on the screen Unlock the keys from the face of the radio and try again Windows Version Compatibility The Version 4 Programmer is designed to work with Windows XP VISTA 32 or 64 bit or Windows 7 32 or 64 bit RT Systems no longer supports use of the programmers on Windows 98 Windows 98SE Windows 2000 or Windows ME Note If you plan to use an older computer for programming your radio you may experience problems with the program resulting
230. the Tone Mode column of the programmer e Step 2 Setting the tone frequency CTCSS or selecting the code for the tone DCS Note The CTCSS tone frequencies and the DCS tone codes should be stored in TWO separate columns in your file to be imported The 2012 RT Systems Inc Importing a file 219 import process does not separate It will ignore incorrect values leaving the tone set incorrectly for the channel e CTCSS Tone Enter one of the 50 tone frequencies in the format MHz decimal kHz with only one digit to the right of the decimal This value must be entered exactly as shown in the chart in the Users Manual A value that is not in the table will result in an incorrect tone value setting in the resulting Programming file This value is set independently for each memory channel e DCS Code Enter one of the 104 codes in a three digit format This will appear as two digits if you editor does not show leading zeroes Two digits are acceptable when the third is a leading zero This value must be entered exactly as shown in the chart in the Users Manual A value that is not in the table will result in an incorrect tone value setting This value can be set independently for each memory channel that uses a DCS tone Skip Marks selected memory channel to be skipped during scanning This field should contain one of the following Scan 0 or Stop to include the channel to be scanned Skip or 1 to mark the channel to
231. tomized sound for the bell The User defined ringers are set up on the Sounds tab of the Menu Settings section of the Programmer accessed from the main screen with Settings Radio Menu Settings Half Dev iation Check the box to engage Narrow 2 5 kHz Deviation as compared to 5 kHz normally or when this option is off This change helps prevent interference with other stations in a crowded environment Note The receiver s IF filter bandwidth is not changed via this setting This setting will not enable the radio to perform on new commercial channels that are on 2 5kHz steps Those frequencies are reserved for commercial use and are not available to amateur equipment Clock Shift Shifts the internal reference frequency slightly to eliminate birdies that interfere on other channels Banks Check the box to assign a memory channel to a given Bank More details about using banks can be found in the Memory Banks section of this Help Note If you are assigning channels to banks after you have entered all of them use Bank Settings Settings Bank Settings or Ctrl B in the Programmer to make access to these columns easier by hiding several of the columns that are not needed for this operation To return all the columns to the screen select Settings Bank Settings again Comments An identifying comment up to 80 characters This information is not transferred to the radio 2012 RT Systems Inc 12 VX8 and VX8D Programmer H
232. tune to the desired frequency 2012 RT Systems Inc Invalid Frequencies 241 It takes both working together to achieve a valid frequency Testing the validity of a frequency The question of validity is seen with frequencies with four digits following the decimal i e 154 03125 may be your local volunteer fire department frequency and while their commercial radios can do this frequency your amateur radio cannot and it cannot be made to do it with any software Let s take 154 03125 and put it to the test Step 1 The first and easiest test for the validity of a frequency is to attempt to dial to that frequency in VFO mode on the face of the radio Remember in your attempts that it may be necessary to adjust the Step see your Operator s Manual for details to get to a certain frequency Turn on your radio Access VFO mode Turn the tuning knob With the frequency changing by 5kHz steps the frequency changes from 154 030 to 154 035 to 154 040 oops lost the 3 in the second position let s try something else Change Step to 12 5 kHz see Operator s Manual for your radio This is generally done in the Set menu however a shortcut key on the face of the radio may give you easier access to this menu item With the frequency changing by 12 5kHz steps the frequency changes from 154 025 to 154 0375 hey at least have the fourth digit now to 154 050 oops missed the 154 03125 completely Again can t get ther
233. uency 2012 RT Systems Inc 126 VX8 and VX8D Programmer Help 15 6 cannot be recalled as a memory channel frequency will be Programming the VFO memory from the Programmer can be particularly helpful for reoccurring events for which the details of this channel are needed along with other memory channels Memories do not have to be programmed into VFO before being programmed into the memory channels when entering details in the Programmer Memory channels are programmed directly into the spreadsheet that appears when the Programmer opens To program the VFO memory select the VFO tab at the bottom of the screen Enter a frequency that is appropriate for the band The details that you enter will replace the default of the radio Simply type over the information shown to make the changes These channels must contain a frequency appropriate for the band They cannot be blank The information to be entered is the same as that for regular Memories except that the VFO s do not have an alpha label available to be programmed See Regular Memory Channels for details of the fields In VFO mode Step is important to ensure that you can tune manually to a certain frequency Pay careful attention to this column when programming the VFOs Home Channels Memories The Home channel memory provides convenient one touch access to your most often used frequency in each band Home channel memories are programmed on the Home tab of the Programmer
234. umber Sends the same number repeatedly e Number Auto Sends the number then moves to the next number automatically e Symbol Sends the same symbol repeatedly e Symbol Auto Sends the symbol then moves to the next symbol automatically Learning Alpha Assign the letter to be repeated or upon which to start the auto progression through the letters Learning Number Assign the number to be repeated or upon which to start the auto progression through the characters Learning Symbol Assign the symbol from the list to be repeated or upon which to start the auto progression through the characters Learning Speed Set the speed for the code Learning Repeat Set the number of repeats for Alpha Number or Symbol mode Training Speed Set the speed for the code Training Mode Choose the characters and pattern to be used for training e Alpha 5 Chr A group of five letters is sent once e Alpha Repeat Groups of five letters are sent The letters are in random order The same group is not sent repeatedly e Number 5 Chr A group of five numbers is sent once e Number Repeat Groups of five numbers are sent repeatedly The numbers are in random order The same group is not sent repeatedly e Mix 5 Chr A group of five alpha number or characters is sent once e Mix Repeat Groups of five alpha number or characters are sent repeatedly Characters of the groups are in random order The 20
235. umber and click OK to move to that memory channel programmed or not Goto Channel Enter channel number to move to Channel Cancel Insert Channel Shift Ins Inserts a blank row without deleting information present The current information and all that follows is pushed down to make room The number of rows inserted will equal the number of rows selected This is a great way to slip channel information into a list of channels 2012 RT Systems Inc Easy Editing in the Grid 53 Note Insertion of rows can result in the loss of data from the bottom of the list You will be warned if there is danger of data loss and given the opportunity to cancel the process to prevent this loss Delete Channel Shift Del Removes the selected row All the data following the deleted row is pulled up to eliminate the blank row Beware Deleted data cannot be recovered Neither the Insert nor the Paste commands write the data to the grid f you accidentally delete data exit the Programmer WITHOUT saving The file will be restored to its condition when you last saved and the last deleted data will be restored Multiple channels can be deleted by selecting them all at once and selecting delete Clear Channel Removes the data from the selected channel without moving all those that follow up to fill this space Leaves the channel blank Move Up Ctrl U The ability to select a channel and have it change places with the channel immediate
236. ust open that file as one for the receiving radio See the File Open section of this Help for details on this process Current File The Programmer can work with several radio files at one time There is no need to close extra files before executing the Send Data To process The current file will be sent to the radio during the Send Data To process The current file is the one that appears in the main window of the Programmer Basically what you see on the screen is what is sent to the radio Settings File 2012 RT Systems Inc 162 VX8 and VX8D Programmer Help Check your global settings under Settings Radio Menu Settings to be sure the right information is being sent The items on this screen are the radio settings that are not associated with a specific memory channel These settings are set once to be sent to the radio with any file that you create Details on these settings can be found in the Programming Other Set Menu Items of this Help If the radio acts funny after it is programmed e Check the Radio Menu Settings e Make changes to the settings as needed e Save the settings file e Do Communications Send Data To with the same memory channel file The settings will be sent with the memory data Completing the Send Data To Process When you execute the Radio Send Data To command you are presented with instruction for putting the radio into clone mode Read the screen carefully The steps to put the rad
237. ve these days The ones you will use most often Home Channels Memories These are special memory channels that have one button access from the face of the radio See the User s Manual for the radio for details of how to access these memories from the face of the radio Limit Memories These memory chamnels can be used as regular memories giving you that many more memory channels for individual use however these also control the top and bottom range of scanning when you begin scanning on one of these Marine and SW Banks Many of the radios have preprogrammed marine and shortwave frequencies These channels can be assigned to banks and have names appended for better organization Skip Memories Frequencies that are to be skipped during VFO scamning VFO Memories Settings for VFO operations when the file s first sent to the radio This channel has no one button recall on the radio and will change when the tuning knob is used To be able to recall settings at any time use the Regular Memory Channels EAI and Weather Memories A special memory channel programmed as an Emergency Automatic ID EAI channel The preprogrammed NOAA weather frequencies can have names appended for easier identification Details on the special editing abilities of the Programmer are included in the Easy Editing in the Grid section Review these details to make data entry even easier At any time these topics are available from the Table of Contents a
238. ve you access to Limit memories Home channels Hypermemories VFO Marine and Shortwave channels that apply to your radio VX 5 Programmes VX 5 Untitied1 loja file Edt Communications Settings Window Help OSH DP GES HH yn Or Of tr De x Trara eet whiners Jota Name ToneMode CTCSS ocs Skip Step Mosk kon aon gt gj 1400000 Simples x FM 5 None e xl se High Jon e 5tHz e Hat Chock Oey Shut Limit memories VFOs Home channels etc as they apply to a specific radio K Memories y Lind y VFDA 4 VFOB Hone iasg essre 2 Click a tab A screen opens with the details that can be entered for these radio functions You can work with the radio without ever using these tabs There are default values on these screens that never need to be changed Make changes for your special activities when you plan to use one of these functions of the radio Save the file Now that you have the frequencies entered into the memory channels Save the file 2012 RT Systems Inc VX8 and VX8D Programmer Help De Lat Conmara air lindos osu SRE BA i i Ji STN bisae nary Rutu Pufu hara ieit rara CALS CIANI 16 Hy Ona PE peN ejan siej son nos NSIT CEN al BPPPPPPPPPPPPPP2zPP2I2PP2Z2 2222222222 wy ICA 106 6H 100 He 10 bee 10 Dite MOSSOS ele la ea alle ou ba Vonn 106 bhe LALN SSELLQseeggaseseesseversses
239. w that you are in bank mode press FW then Band again to enter bank selection mode The frequency on the radio will be replaced by Bank or the bank name Entering bank names using the programmer is discussed in the next section of this help topic Turn the KNOB to select a bank Press Band again to lock in that selection In bank mode the radio operates only on the channels assigned to that bank To return to operations on all memory channels press Band key The MR will return to the display to the left of the frequency indicating that the radio is operating in memory mode with all channels available Bank Names and Linking These features are programmed under Settings Bank Names and Linking 2012 RT Systems Inc 104 VX8 and VX8D Programmer Help Name Analpha numeric tag up to 6 characters can be assigned to a memory bank to more easily identify it That name appears at the top of the bank column in the Programmer lt appears on the radio when you are selecting a bank Link Check the box to join banks for scanning When scanning is begun on any one of the banks in the linked group all the channels of these banks will be included Note Bank linking is only for scanning When tuning manually in a bank only the memory channels in that bank will be available You can have only one linked combination so choose carefully Remember if you begin scanning on a bank that is not linked you will scan
240. wet losa ar veg te ii or soe o tht is oe eu wen fre wre ow ser oh E Dr wen one or soe Ea mr mu weer e o sir E ae m wot Toa ea or sur T E ar m wer twe 1 ov soe e N P Pu AA Tre 10M kes or sur a Or n mar iow min or joe oF la nr om rre ue o sier gt in E me m LOL foe A or sue T ar e or tow A E DF lt r twee pe hee or sirr o ha I DP mal ama or tos ALA E or m am toe ie o Sie T E Bil f i I gt y a a e E a noer n times q dido y DA OA Cy FS Ur z 2 gt ET i e Save the programmer file to make this change permanent Press Ctrl S or select File then Save from the menu that opens With either process it will appear that nothing happens however Windows has made the change to the radio file permanent 2012 RT Systems Inc 202 VX8 and VX8D Programmer Help e Send the file to your radio TravelPlus is a product of the American Amateur Radio League Any images from TravelPlus included in this help are copyrighted to DHF Systems LLC O 2012 RT Systems Inc 204 VX8 and VX8D Programmer Help 20 20 1 Copying From an Excel Spreadsheet The Programmer can handle information copied from an Excel spreadsheet Although this process is very valid for transferring data between these programs it is not recommended for original file creation lt can be tedious getting all the information into the file to be copied For example
241. with this feature They can participate in a conversation only once it has begun The Coded Squelch is reactivated after about 20 seconds of silence When the Coded Squelch feature is activated the P notation will appear at the 100 MHz digit of the frequency display When the Coded Squelch is open the P will flash on the display This gives you a visual indication of your ability to receive calls from all persons in your group If you want to have your radio remain silent until a call is received from anyone in your group use TSql Tone Squelch as the tone mode rather than the Enhanced Paging and Coded Squelch system to allow for those who do not have this feature It is safe to say that of today s radios all have Tone Squelch available while few have the Enhanced Paging and Coded Squelch system To setup the Enhanced Paging and Coded Squelch system in the Programmer 2012 RT Systems Inc ss VX8 and VX8D Programmer Help 1 Enter the memory channel information for the frequency to be used Note Most repeaters do not pass tone Unless you are sure of the repeater s ability to complete this part of the transmission this feature should be used for simplex radio to radio transmissions 2 On this memory channel set Tone Mode to Pager You will notice that none of the tone frequency fields become available on the main screen when this option is selected This is normal functionality for the Programmer since tone fr
242. y are detailed for a particular radio on the Get Data from radio screen The trick is to follow each step one ata time Send data to the radio 1 Go to Communications in the top menu 2 Click Send Data to Radio 3 Read and follow each step Remember the keystrokes are different for each radio They are even different for this process than they were for the Get Data from Radio process They are detailed for a particular radio on the Get send data to radio screen The trick is to follow each step one ata time Cable Issues Check that you are using the correct cable for this radio Many radios have jacks that will accommodate the programming cable from a different radio Although the cable fits in the jack the radio does not accept programming through the wrong jack You can see the cables for each radio by clicking on Programming Cable Chart Check that the cable is securely in the USB Port Be sure it has not pulled loose this is easy to do with a USB Also the cable should be plugged into a USB port on the computer rather than on a USB hub Check that the cable is plugged into the radio securely On cables with 6 or 8 pin round din plugs you may want to check that the pins are not bent in such a way that they are making a bad connection Unplug the cable from the radio and check by looking at the pins in the plug On cables with 4 6 or 8 pin modular plugs that address the mic jack push the cable towar
243. y write operation is ignored This option does the opposite of what it implies If engaged your memory channels are not protected as well as they are when it is not engaged When engaged this option gives you complete control of where a memory channel is stored In this mode it will be more than easy to store right over the last memory channel you were working before going to VFO to enter the details for this new memory channel The chance for loss of data is great Leaving this option off and letting the radio select the memory channel location may save you the frustration of having to re enter a channel that was there a minute ago Memory Write Selects the method that the radio uses for selection of the next memory channel slot into which your settings are saved when programming from the face of the radio The options are Lower Stores the data into the next available free channel Puts the new memory channel somewhere in the list of memories to prevent breaks in the list Next Stores the data into the memory channel which is the next highest from the last stored memory channel Keeps everything in order as you enter them even if there are breaks in the list Mic Gain Adjust the microphone gain level from Level 1 Level 9 to improve transmission quality Moni TCall Sets the function of the MONI key the one just below the PTT key When that button is pressed the radio will complete one of the following opti
244. you are satisfied with the list you are finished with TravelPlus You can exit that program or leave it running while you access the RT Systems radio programmer Run the RT Systems programmer Version 4 only If the programmer is already running switch to it now to create a file from this list for programming the radio 2012 RT Systems Inc 194 VX8 and VX8D Programmer Help TravelPlus is a product of the American Amateur Radio League Any images from TravelPlus included in this help are copyrighted to DHF Systems LLC 19 2 Opening the list in the Programmer Once you have created a list in TravelPlus Version 10 0 or higher open any one of the Version 4 programmers installed on your machine To access the list e Select File from the menu at the top of the screen e Select Open TravelPlus list this option was disabled until you created the list ae Open Ctri 0 Open Travel Plus List Close NW bel Save Save As Import Export Print Preview amp print Send File as E Mail From the Menu select File then Open Travel Plus List 1 C Wsers Complete V6 File 2 C Users 654 3 C Wsers test 4 C Users test Exit SUBURRRON NB sy 2012 RT Systems Inc ARRL TravelPlus 195 e The list appears in the window of the programmer _ x ecan i at ma Settings DStar Window Help 14 it x y TATI ST PEN ESSE A M
245. you have done in O 2012 RT Systems Inc 170 VX8 and VX8D Programmer Help this file The Get data from process will replace the information in the open file with what is in the radio Other Radio Menu Settings and a New File The radio is more than just memory channels There are features that are controlled once for the radio They cannot be customized for each memory channel These features are address in the programmer under Settings Radio Menu Settings The settings for these features that were last saved are use whenever a New file is created There is no need to reset these features for each new file If you have not saved a settings file factory these radio menu items are set to factory defaults as if you reset your radio Note If you radio acts funny after you download to it i e keypad beeps are different squelch is open Scan resume settings are changed etc you have not yet set these options in the Settings portion of the programmer To make these option settings permanent e Select Settings Radio Menu Settings from the menu at the top of the screen e Personalize your options just as you did on the radio e Select File Save from the menu on the Settings screen e Enter a filename when prompted and click Save e Select File Exit from the menu on the Settings screen e You will not have to change these again unless you want them to function differently The settings file will change only if you read
246. you move your mouse over them normal Windows selection processes When they are selected they will be highlighted in a color based on the scheme of your computer Press Ctrl V select Edit Paste from the menu at the top of the screen or Right Click and select Paste from the options in the menu that opens The copied value will appear in each of the fields fam AAA Tee toe Cenmuncment Settings Window Neo Dee ADA SoS HT I copy ura rate x Towa 143 25000 MESJ hare ME 143 0000 mona MRA MI ML 32301033078 aao ue mwa ees aoa 10337500 AL ae 0000 1432008 A 12 ig PEP SLTELLOSLOSL CSL OOCOLOOESLU CELE SE SEL ESCLE SELES LOS LL EL g und 353535 5555 5 Hanso 14100 MIDI hase aaoo 00 mas nyare suom nowe mem nen mso soe masua 10528 masso masae MSI 14253758 HASKO 1415008 paisas 143 s0zse maso M25750 H 10307 aaoo 143 4000 2 5 BR 3333333337 1337 MUELA mome ma nee saama mues mewo ae DA 0 LATIDOS Per Mmer HARO MENOS Hara rA mansoa 141 75300 ma II H7O 14475008 aan MA MITO 0070 2070 TE aaeoa 142 00000 MI 1180 masa ML PL 16477 pas asoon 143 8800 Misti Deez HATO 14137500 MUI 87 AI 1430000 nos ml Mammes Ut Memerine VIO Hone EELEE 33713383337 EEEF e TEEPE EDEL SEEDS TOLELE LEED ORL ESE EDT EO ED EE n 2 D w E 2 E a 2 a3 EJ gt 2 2 n 2 3 EJ s 2 o lt 2 A
247. ze the command NOTE Be sure to use Offset Direction if your file contains and amp endash in this column Using Offset Frequency for this column will result in all channels being imported as simplex Operating Mode Enter FM AM or WFM as appropriate for the frequency Name Enter an Alpha Numeric tag up to 8 characters for the memory channel to provide an easy reminder of the function of a particular frequency Not all radios have this available for each memory channel Consult your Users Manual for details Tone Mode Use of the tone systems of the radio allows for silent monitoring until a call is received with a corresponding tone Tone mode also allows access to repeaters that are made private with a PL tone Most radios offer CTCSS Continuous Tone Coded Squelch System or DCS Digital Coded Squelch to be tailored to your particular needs Consult your Users Manual for details specific to your model Use of either of the tone systems requires two steps Your import file will handle these steps in THREE 3 columns e Step 1 Turning on Tone Mode There are now so many different tone modes and combinations of them we recommend that you use the designation just as it appears in the Programmer for your radio to identify the Tone Mode to be used Examples would include but not be limited to e None Tone mode off e Tone Encode e T Sql Encode Decode e DCS DCS Tone e Others specific to your radio as detailed in

ADMS-VX8 Programmer Help File.

Contents

Download Pdf Manuals

Related Search

Related Contents