X600 - Hobbyking
Contents
1. HK X600 X SERIES INTELLECTIVE SELF ADAPTING MODULE MANUAL This manual is for the user of HK X600 F HK X600 J HK X600 H This system applied an intellective self adapting jump frequency algorithm which can scan automatically and select the best frequency for working If it is interfered periodically or the signal channel is blocked beyond the setting time while working it can automatically review and jump the frequency group to keep a stable working state The difference between our product and some similar products of different brands on market is as below 1 The binding switch was anti collision designed to avoid operation error 2 There are five programmable switches that can set various functions on OS and OSX series receivers 3 ESC types to OS and OSX series receiver can be programmed 4 The control channel of the integrated linear servo on OS and OSX receiver can be programmed 5 The output channel on OS and OSX series receiver can be programmed Product catalog TYPE HK X600 F HK X600 J HK X600 H WEIGHT 42 52 493g 42 52 Maximum transmit 18DBm 18DBm 18DBm power Frequency za zi Voltage son 0 12 0V 5 012 000 0 12 0V 5 0 12 0V Input signal PPM oo 5V PPM o ow 5V PPM 50mv BK 2 5V type Support outside yes signal Applicable FUTABA SPEKTRU JR SPEKTRUM HITEC SPEKTRUM transmitter M SIZE mm 08 15x37 26x22 05 64 46x51 80x23 27 08 15x37 26x22 05 ATTN2. 1 Transmitters such as FUTABA JR and HITEC it can support all those transmitters that can install a module 2 The transmitters we tested are SPEKTRUM DX6i and DX7 we didn t do any test on other transmitters INSTRUCTION FOR USE 1 Programming functions Please check the user manual for OS and OSX series receiver 2 Port distribution 3 How to connect Futaba JR and HITECH transmitters HK X600 F J H module can be mounted on the place where the original FUTABA JR and HITECH module is located USAGE DETAILS 1 Turn on the power of the transmitter set to PPM mode and then turn off the power 2 Removed the original module and mount HK X600 F J H module install the antenna and tight it 3 Set HK X600 F J H E SW5 to OFF and turn on the power of the transmitter you can see the LED light blinks it indicates that HK X600 F J H has already checked the PPM signal from transmitter 4 HOW TO CONNECT A SPEKTRUM TRANSMITTER HK X600 F J H module connects SPEKTRUM transmitter through connecting SPM9545 on SPEKTRUM Usage details 1 Select a SPM9545 that already be bound with SPEKTRUM transmitter 2 Connect SPM9545 to the port of CON3 on HK X600 F J H according to figure 1 fix SPM9545 according to figure 2 Turn the SW5 on HK X600 F J H to ON 3 Turn on the power of SPEKTRUM first and then connect the power to the port of CON1 on HK X600 F J H 4 If red LED light on HK X600 F J H blinks it
3. indicates the connection between HK X600 F J H and SPEKTRUM is succeed Figure 1 Figure 2 5 Power ON and Power OFF order Power ON Under the use of FUTABA JR and HITEC transmitter Transmitter gt Receiver Under the use of SPEKTRUM transmitter Transmitter gt module gt receiver Power OFF Under the use of FUTABA JR and HITEC transmitter Receiver gt transmitter Under the use of SPEKTRUM transmitter receiver gt module gt transmitter 6 binding operation HK X600 F J H can either bind one receiver or several receivers at one time When HK X600 F J H module connects with FUTABA JR or HITEC transmitter SW1 SWS5S is set to OFF after binding The green LED light is out as soon as the power is on When HK X600 F J H is connected with SPEKTRUM transmitter SW1 SW4 is set to OFF SWS is set to ON LED light is on as soon as it is powered 1 Connect power with the receiver it enters binding mode after about 5 seconds LED light on receiver blinks from slow to fast 2 Turn on the power on the transmitter press the binding switch on module please set the program switch if it is necessary release the binding switch when the green LED light blinks from dark to bright and then from bright to dark it indicates that the model enters binding mode the red LED light on module blinks quickly at the moment 3 After about 3 seconds the LED light on receiver blinks slowing from jump blinks and then becom
4. es constant on without blink 4 The binding operation is successful if the transmitter can control the receiver ATTN Binding operation is a must for the first time use Warning x Prohibit Binding operation when operating the model x Prohibit using these products in the high temperature and high humidity environment x Please notice the place of anode and cathode when pit in the batteries x Non normal use damage is not responsible for warranty
Download Pdf Manuals
Related Search