the user manual
Contents
1. The set cannot play files normally if the parameters of the file exceed the limitations of the system the file format is not supported the file is damaged or the file cannot be decoded Do not disconnect the USB drive when the system is reading a file or transmitting data otherwise the system or the drive may be damaged MHL Mobile High Definition Link not available for some models You can use the following functions by connecting the HDMI port identified with MHL on the TV and the USB port of an MHL compatible mobile phone or similar device with an MHL cable Charge your mobile phones from the TV Two way remote operation between TV and mobile phone e Video or audio output from your mobile phone Notes These functions may not be available depending on the connected equipment If there is no more battery life left in the connected device charging will not start To operate the mobile phone with the TV remote control you need to turn on the T Link function first then press OPTION and select T Link gt Setup gt Guide menu Follow the virtual keypad to do operations Connecting MHL compatible device Connect the MHL compatible device to the HDMI port identified with MHL on the TV using an MHL cable not supplied charging will start automatically e When connecting an MHL compatible device to the HDMI port identified with MHL on the TV switch the TV input source to the corresponding HDMI inpu2. Press W to go to the first entry field Enter the IP address Subnet mask Default gateway Primary DNS and Secondary DNS values Use the numeric buttons to enter numbers and the A lt gt buttons to move from one entry field to another Once IP setting is completed press A V lt gt to select OK and press OK to confirm The set will try to connect to the network and inform you about the result Press 5 to return to the Network menu 6 If you want to check the information on current connection such as Interface Address type IP address etc press A V to select Information and press OK gt to enter Press 5 to return to the Network menu 7 If you want to check the Internet connectivity press A Y to select Connection test and press OK P gt Connecting to a wireless network Your TV is equipped to be connected to your home network wirelessly To do that you need a wireless router or modem 1 Press MENU or OPTION on the remote control select Settings gt Network gt Internet connection and press OK gt to enter 2 Press A V to select On and press OK to confirm 3 Press A V to select Interface and press OK gt to enter 4 Press A V to select Wireless and press OK to confirm 5 Press A V to select Wireless settings and press OK to enter You can set the wireless network connection in 3 ways a Scan e Press A to select Scan and press OK gt to enter The TV will search all access points within
3. T 19 TV Remote 19 WiFi TV link 20 IDDM sisiomeinan ainiaan riarann is 20 HbbTV access 20 HbbTV deactivation 0 2 eee 20 Chapter 7 Smart TV Access Smart TV portal cceceeeeeeeee ees 21 Chapter 8 Other information Password in Parental Control 0 e 22 Troubleshooting 22 Television specifications 22 OSSINONCE sienien aonana eiaeia 22 ysi 6u3 Chapter 1 Connections Connect the power and antenna To switch on TV after connecting power cord press or POWERI Notes Position of power socket varies according to TV model On certain models you have to turn on the power switch first Disconnect the power cord before connecting devices Cable Connect DVD player home theatre system LAN HDMI 1 HDMI 2 HDMI 3 AV Satellite Antenna Cable oa 4K MHL ak 4k adapter input input g 8 i N Are DVD player Home theatre system Note AV output is not available in Norway EN 4 Connect DVD recorder cable receiver S ae F AV Satellite Antenna Cable adapter input input Notes SPDIF HDMI 4 4K ARC AUDIO in 1 CMP YPbPr adapter USB 3 0 5V 1A MAX Connect Blu ray Disc player HD game console Connections HD camcorder he
4. and press OK to confirm 3 Press A V to select Digital subtitle language 2nd and press OK gt to enter 4 Press A F to select a secondary subtitle language and press OK to confirm 5 Press EXIT or MENU to close the menu Shortcut operation Press SUBTITLE on the remote control to directly select a subtitle language available for the selected digital TV programme Selecting a subtitle type on digital TV channels 1 Press MENU or OPTION on the remote control select Settings gt Channel gt Subtitle gt Subtitle type and press OK P to enter 2 Press A F to select a subtitle type and press OK to confirm You can select Hearing Impaired to display the hearing impaired subtitles with your selected language 3 Press EXIT or MENU to close the menu Using Teletext Selecting decoding page lanquage 1 Press MENU or OPTION on the remote control select Settings gt Channel gt Teletext gt Decoding page language and press OK P to enter 2 Press A F to select a proper type of language in which Teletext will display and press OK to confirm 3 Press EXIT or MENU to close the menu Digital Teletext language On digital TV channels depending on the broadcaster you may be able to enjoy a service with multiple initial Teletext pages in different languages This function allows you to select an available language as primary language which relates to different initial Teletext pages 1 Press MENU or OPTION on the remot
5. be signalled to you by an on screen indication generally a red button but other colour buttons may also be used Press the indicated colour button to open the interactive pages 4 Use A lt gt and the colour buttons to navigate through the HbbTV pages and press OK to confirm HbbTV deactivation To avoid disturbances that may be caused by HbbTV broadcasting tests you can turn off the HbbTV function 1 Press MENU or OPTION on the remote control select Settings gt System gt HbbTV mode and press OK P to enter 2 Press A V to select Off and press OK to confirm 20 Chapter 7 Smart TV Allows you to enjoy Internet Applications Apps specially adapted Internet websites for your TV You can control the Apps with the TV remote control WARNING Configure the network settings before using Smart TV applications e Slow responses and or interruptions may occur depending on your network conditions If you experience a problem using an application please contact the content provider e According to circumstances of the content provider an application s updates or the application itself may be discontinued Depending on your country s regulations some applications may have limited service or not be supported Changes in application content may be made without prior notice by the service provider Access Smart TV portal 1 Press MENU to display the homepage 2 Press A lt gt to sele
6. browser press OK to watch and automatic playback begins from the selected video 3 Press lt P gt to fast reverse or forward when the focus is on the progress bar press W to show the playlist and press OK to pause or play the video 4 Press OPTION to display the video menu in the browser mode You can select different picture preset settings play modes and screen modes etc 5 Press 5 to return to the previous interface Music Use this function to play back music if available 1 Press A to select Music then press OK P to enter the main file content browser 2 Use A lt gt to select a song in either main or sub file content browser press OK to play and automatic playback begins from the selected song 3 Press lt gt to select different control buttons shown at the bottom of the TV screen and press OK to confirm You can pause or play the song select the previous or the next song select different play modes and show the playlist etc When you move the focus onto the progress bar you can press lt P gt to fast reverse or forward 15 ysi 6u3 Press OPTION to display the music menu in the browser mode You can select different sound preset settings and show the music info if available etc You can also select Audio only to listen to the music with the screen turned off Any key press will turn the screen on 5 Press 5 to return to the previous interface Using EPG Electronic Program
7. different signal source or access Smart TV the 3D mode will be automatically disabled Some 3D modes may not be available depending on the input format of the 3D video source Supported 3D modes Analogue TV AV 2D to 3D Digital TV CMP HDMI USB Videos from the Internet 2D to 3D Side by Side Top and Bottom Line interleave 3D function in USB mode During the playback of a selected video from USB press OPTION to display the video menu in the browser mode then select 3D mode For more detail information refer to the above related descriptions SPDIF type Connect the TV to an audio device through the SPDIF output To select a proper sound type for your SPDIF output press MENU or OPTION on the remote control select Settings gt Sound gt SPDIF type and press OK gt to enter Press A V to select an option and press OK to confirm If you select Auto the SPDIF output format is Dolby Digital when the programme s sound format is Dolby Digital or Dolby Digital Plus or HE AAC PCM when the programme s sound format is MPEG If you select PCM the SPDIF output format is PCM regardless of the programme s sound format If you select Off this turns off the audio output from the audio device connected to the SPDIF output 11 ysi 6u3 Note The options you may choose depend on the programme you are watching If the sound is ahead of the picture you can select SPDIF delay from the Sound menu p
8. guarantee that the use of the WiFi TV link function will be smooth or error free since not all devices are compatible with the WiFi TV link function HbbTV HbbTV Hybrid broadcast broadband TV is a service offered by certain broadcasters and available only on some digital TV channels HbbTV delivers interactive television over broadband Internet These interactive features are added to and enrich the normal digital programmes and include services such as digital teletext electronic programme guide games voting specific information related to the current programme interactive advertising information magazines catch up TV etc EN Network To use HbbTV please ensure your TV is connected to Internet and HbbTV is switched on Notes HbbTV services are broadcast or country dependent and may be unavailable in your area You cannot download files to your TV with HbbTV function Application provider or broadcasting related conditions may cause an HbbTV application to be unavailable momentarily To access HbbTV applications you must connect your TV to the Internet via a broadband link HbbTV applications may not work correctly in case of network related issues HbbTV access 1 Press MENU or OPTION on the remote control select Settings gt System gt HbbTV mode and press OK P to enter 2 Press A V to select On and press OK to confirm 3 When you tune to a TV digital channel that offers HbbTV this will
9. input format options Not available for some models To access TV mode To enter channel numbers to enter a letter a digit or a symbol in some functions To select a desired energy saving mode To select connected devices To control the volume To switch the sound off and back on To display programme information if available To change channels To display the function menu to perform certain operations to display the Teletext page in different modes To access the Smart TV portal To toggle the Electronic Programme Guide on or off only available for digital channels To access the homepage To navigate through the menus to select menu options To navigate through the menus to select menu options and change values To confirm an entry or selection To return to the previous menu To exit the menu homepage or Teletext etc To select the screen mode To access the homepage To select the sleep timer options To return to the previous channel in TV mode When the homepage is displayed press and hold this button for 3 seconds to bring up the History menu To bring up your favourite channel list To display the channel list To select tasks or Teletext pages to be used for MHEG and HbbTV function To select a sound type available for selected analogue TV programme to select an audio language available for selected digital TV programme To select a subtitle language available for selected digit
10. or MENU to close the menu After configuring the selected source name will be displayed after the name of the related connector in the source list when pressing SOURCE on the remote control or OK on the TV set Note Not all models have OK button on the set Software update Note Do not switch off or unplug the TV until the upgrade is completed Press MENU or OPTION on the remote control select Settings gt System gt Software update and press OK P to enter You have the following options to update the software By USB Enables you to install a new version software from a USB stick Insert the USB stick in which a new version software is stored into a USB socket of the set Select By USB and press OK to enter Follow the on screen instructions to complete the process By network Enables you to download and install the latest version software from the Internet Make sure to set up a wired or wireless network connection first then select By network and press OK to enter Follow the on screen instructions to complete the process Note Keep successful network connection during upgrade 13 ysi 6u3 By channel Enables you to install the latest version software if available from the broadcast Select By channel and press OK gt to enter Follow the on screen instructions to complete the process Changing to shop or home mode 1 Press MENU or OPTION on the remote control select Settings gt System gt Locat
11. to exit oak WN EN 17 ysi 6u3 Chapter 6 Network Network connection You can set up your TV so that it can access the Internet through your local area network LAN using a wired or wireless connection Connecting to a wired network You can connect your TV to your LAN using cable in three ways e You can connect your TV to your LAN by connecting the LAN port on your TV to an external modem using a Cat 5 cable e You can connect your TV to your LAN by connecting the LAN port on your TV to an IP sharer which is connected to an external modem Use Cat 5 cable for the connection Depending on how your network is configured you may be able to connect your TV to your LAN by connecting the LAN port on your TV directly to a network wall outlet using a Cat 5 cable Note that the wall outlet is connected to a modem or router elsewhere in your house 1 Press MENU or OPTION on the remote control select Settings gt Network gt Internet connection and press OK gt to enter 2 Press A to select On and press OK to confirm 3 Press A V to select Interface and press OK gt to enter 4 Press A V to select Ethernet and press OK to confirm 5 Press A to select IP settings and press OK gt to enter You can set Address type to Auto or Manual Select Auto if you want the TV to acquire and enter the needed IP address automatically Select Manual if you want to enter your IP address manually then e
12. 30Hz 25Hz 24Hz Picture format is fixed to 16 9 It is recommended to use high quality and well shielded HDMI cables to avoid possible interferences Excessive sound pressure from earphones and headphones can cause hearing loss EN ysi 6u3 Chapter 2 Getting started Remote control functions Most of your television s functions are available via the menus that appear on the screen The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings Note You are recommended to use the full screen mode Do not use the display mode with black bars on both sides of the picture such as 4 3 for a long time otherwise the TV screen may be damaged permanently J AO ap PN E T 2 34 LL allea eN T 8 I s TUV r 0 a ECO SPACE SOURCE L J 4 m Vv P sE or Smart TV D C DP io Y Exir Come Zoom zoom 25 gt rca ow 0 LOE PREcH Fav ED _ eee UL ane uate ca wa J Le pi U a ae oe O 3D TV Alphanumeric buttons ECO SOURCE V INFO P OPTION Smart TV GUIDE MENU Aly lt gt OK gt EXIT ZOOM ft SLEEP PRE CH FAV LIST Colour buttons LANG SUBTITLE TEXT K Oo Pil gt I lt lt gt gt Standby quit standby To select the 3D
13. D indicator on the TV front panel to flash or not 1 Press MENU or OPTION on the remote control select Settings gt System gt LED Indicator and press OK P to enter 2 Press A to select Flashing or Normal and press OK to confirm 3 Press EXIT or MENU to close the menu AUN Viewing pictures playing music and watching videos from a USB storage device Your TV is fitted with USB connectors that enable you to view pictures listen to music or watch videos stored on USB drives Supported file formats Picture JPG JPEG BMP PNG Music MP3 Video AVI MPG MPEG TS DIVX MKV HEVC Notes Some USB keys and USB products like digital cameras or mobile phones are not fully compatible with USB standard so they may not work with the TV media player Not all USB keys or devices are compatible with the USB function Not all above formats are recognised The encoding formats of your files will determine whether or not they can be played Please use high speed minimum 5MB s read transfer USB drives To play back 4K content it is recommended to use 2 5 or 3 5 HDDs connected to the USB 3 0 port When a USB device is connected press MENU on the remote control to display the homepage press A lt gt to select Media and press OK to enter Press lt gt to select a USB drive in case you have inserted two or more USB drives and press OK to enter All Use this function to display all supported files if avai
14. HDMI sockets in your TV and enable one touch play and one touch standby between CEC devices Enabling or disabling T Link 1 Press MENU or OPTION on the remote control select Settings gt System gt Advanced settings gt T Link and press OK gt to enter 2 Press A V to select On or Off and press OK to confirm 3 Press EXIT or MENU to close the menu Using one touch play With one touch play pressing the play button on for example your DVD remote control starts playback on your DVD device and automatically switches your TV to the correct source displaying DVD content Using system standby With system standby pressing the button on for example your TV remote control switches your TV and all connected HDMI devices to standby mode Note The CEC functions depend on the devices connected and it is possible that some devices may not interoperate correctly when connected to this TV The user manual or the manufacturer of the problematic devices should be consulted for further information 14 Reset shop Allows you to reset the TV to factory default settings 1 Press MENU or OPTION on the remote control select Settings gt System gt Reset shop and press OK gt to enter Use the numeric buttons to enter the password Press lt gt to select OK and press OK to confirm The Initial setup menu appears Follow the instructions in the section Initial setup LED Indicator Allows you to select the LE
15. Important information Safety Ensure that your domestic mains supply voltage matches the voltage indicated on the identification sticker located at the back of your set Where the mains plug or an appliance coupler is used as disconnect device it shall remain readily operable On certain models the light indicator is located at the side of the TV set The absence of a light indication at the front does not mean that the TV set is fully disconnected from the mains To disconnect the TV set completely the mains plug must be pulled out The TV set s components are sensitive to heat The maximum ambient temperature should not exceed 35 Celsius Do not cover the vents at the back or sides of the TV set Leave sufficient space around it to allow adequate ventilation Install the appliance away from any source of heat fireplace etc or appliances creating strong magnetic or electric fields Moisture in rooms where the set is installed should not exceed 80 humidity Moving the set from a cold place to a warm one can cause condensation on the screen and on some components inside the TV set Let the condensation evaporate before switching the TV set on again WARNINGS This appliance is intended for domestic household use only and should not be used for any other application such as for non domestic use or in a commercial environment If the external flexible cable or cord of this product is damaged it shall be replaced by the manufac
16. TENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND DOES NOT WARRANT THAT THE DEVICE CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS OR THAT OPERATION OF THE DEVICE OR SERVICES WILL BE UNINTERRUPTED OR ERROR FREE UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE SHALL TCL BE LIABLE WHETHER IN CONTRACT OR TORT FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES ATTORNEY FEES EXPENSES OR ANY OTHER DAMAGES ARISING OUT OF OR IN CONNECTION WITH ANY INFORMATION CONTAINED IN OR AS A RESULT OF THE USE OF THE DEVICE OR ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY THIRD PARTY EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Third party services may be changed suspended removed terminated or interrupted or access may be disabled at any time without notice and TCL manufacturer of Thomson branded TVs makes no representation or warranty that any content or service will remain available for any period of time Content and services are transmitted by third parties by means of networks and transmission facilities over which TCL has no control Without limiting the generality Other information of this disclaimer TCL expressly disclaims any responsibility or liability for any change interruption disabling removal of or suspension of any content or service made available through this device TCL may impose limits on the use of or access to certain services or content in any case and without notice or liabilit
17. adphones CI module HD game console Blu ray Disc E suryoue Player oN NA COMMON INTERFACE SPDIF HDMI 4 HD Camcorder go p T a Sn APP ak ARC AUDIO in 1 Saplar EE LD USB 3 0 5V 1A MAX A Your TV might not have all connectors visible on diagram above Number of USB and HDMI ports may vary according to TV model Button and connector locations may vary according to TV model USB connectors are for data input from USB drives and for connecting other relevant USB devices where applicable External HDD drives without own power supply have to be connected to USB connector marked with 1A current output All USB devices have to be directly connected to TV set without cable extenders In case extender is required maximum 50cm length is recommended Longer extenders should have ferrite beads ARC Audio Return Channel function is only supported on the HDMI port identified with ARC To use ARC function please turn on T Link function first as described in the T Link section MHL Mobile High Definition Link function allows you to link an MHL capable mobile device to the television and is only supported on the HDMI port identified with MHL Maximum video resolution is 1080P 60Hz Please connect 4K video sources to HDMI inputs using HDMI high speed cable Supported 4K UHD video formats 3840x2160 60Hz 50Hz
18. al TV programme To toggle Teletext on or off To select the previous picture music or video To stop playback To start or pause playback To select the next picture music or video To start fast reverse Recording button To start fast forward EN 6 Getting started Important Batteries shall not be exposed to excessive heat such as sunshine fire or the like Remove batteries when the remote control is not to be used for a long time Batteries left in equipment may cause damage through deterioration and corrosive leakage invalidating the guarantee To protect the environment use local recycling facilities for battery disposal Dispose of used batteries according to the instructions CAUTION Risk of explosion if batteries are replaced by an incorrect type Replace only with the same or equivalent type recommended by the equipment manufacturer If the batteries in your remote control are run down you can use the buttons on your TV set They have the following functions For models with below buttons on the set For models with below buttons on the set TV mode In menus TV mode In menus PR or PR A P A P A PR or PR V P y VOL lt 1 or VOL gt V gt VOL lt 1 or VOL lt V lt dor Features Short OK Short press OK or amp press Return Long press O Switch the TV on and off 1 When the power cord is connected the TV will be turned on directly or be in standby mode If the TV is in standby mo
19. ase to search and store your channels you may do an automatic channel search by following the instructions in the next section Performing an automatic channel search Step 5 Clock setup Use the numeric buttons to enter the date and time then select the OK button and press OK to confirm Step 6 Congratulations The Congratulations message appears Press OK to confirm Performing an automatic channel search This section describes how to search and store channels automatically This may be done in any of the cases below you have selected I don t want to install channels in the initial setup you see No program info now please search channels first in TV mode you want to update your channels 1 In TV mode press MENU or OPTION on the remote control and select Settings gt Channel gt Channel scan Press OK P to enter 2 The TV installs and arranges channels according to your country Press A to select Country and press OK P to enter Enter the default password 1234 or your own password in case you have changed the password in the System gt Lock menu Press A to select your country and press OK to confirm 3 Press A V to select Tuner mode then press OK gt to enter Press A V to select Cable Antenna or Satellite and press OK to confirm Note Satellite option is available only in selected models 4 Follow a b or c below a If you have selected Cable e Press A V to select Aut
20. ayer 11 2 Select Library gt Media sharing 3 Check the checkbox Share my media to 4 Select the icon of the TV set connected to your PC 5 Select Allow to allow the TV set to access your PC and select OK to enable the access Note Use the Settings button to customize your desired settings 6 Select Library gt Add to Library 7 Select your personal folders or folders of other users that you can access for sharing 8 Select Add and press OK to enable the addition DLNA application Select Media from the homepage and press OK to enter Then you can view pictures listen to music or watch videos which are stored on your PC EN Network Supported file formats Picture JPEG PNG Music MP3 WMA LPCM Video MPEG2 MPEG4 WMV Notes If DLNA is switched on the TV will display the list of available DLNA servers which are available in local network Content from third party DLNA servers may not play correctly on your TV due to compatibility problems When sharing media files from a PC certain features may be unavailable and due to the file and encoding formats used playback issues may occur Because of network related conditions playback of media files may not be error free When this happens play them from a USB drive GuideOn GuideOn refers to network EPG which is an app of preview programme and helps you navigate through a vast amount of content It provides functionality similar to a prin
21. c buttons to enter a four digit number as your password 0000 is too simple to be set as your password Enter the same code again to confirm the password After that you will enter the next step automatically In this step you can only press lt to return to the previous step 3 Press A V to select your location then press OK gt to enter the next step Step 2 Network setup 1 Press A to select your network connection type Wired or Wireless then press OK P to enter the next step 2 Follow the guides on the screen and press the corresponding buttons on the remote control to proceed Note You can also skip this step and step 3 by selecting do not have a network connection and connect to the Internet later For details please refer to section Network Connection EN Step 3 Software update 1 If the set has connected to the network successfully it will search for upgrade files automatically 2 Follow the guides on the screen and press the corresponding buttons on the remote control to proceed Step 4 Channel installation 1 Press A to select Continue to install channels 2 Follow the guides on the screen and press the corresponding buttons on the remote control to proceed Note To prevent the channel installation process from being interrupted wait for the message indicating that the installation is complete You can also skip this step by selecting don t want to install channels n this c
22. ce services After inserting and activating the common interface module press MENU or OPTION on the remote control select Settings gt System gt Common Interface and press OK P gt to enter This menu option is only available if the common interface module is correctly inserted and activated On screen applications and content are provided by your digital TV service operator wh EN Using more of your TV DivX video not available for some models This DivX Certified device has passed rigorous testing to ensure it plays DivX video To play purchased DivX movies first register your device at vod divx com Find your registration code in the DivX VOD section of your TV s System menu as explained below Obtain your registration code Press MENU or OPTION on the remote control Select Settings gt System gt Advanced settings gt DivX R registration e Press OK and your registration code will be displayed Go to vod divx com for more information on how to complete your registration Deregister your TV If you wish to deregister your TV Press MENU or OPTION on the remote control Select Settings gt System gt Advanced settings gt DivX R deregistration e Press OK gt and a message will guide you DivX DivX Certified DivX Plus HD and associated logos are trademarks of DivX LLC and are used under license T Link Use this function to search for CEC devices connected to the
23. ck and sides regularly Using solvents abrasive or alcohol based products could damage the TV set If an object or liquid enters the appliance unplug it immediately and have it checked by an authorized engineer Never open the appliance yourself since this may put you at risk or damage the appliance Hanging the TV set on the wall Warning This operation requires two people To ensure a Safe installation observe the following safety notes e Check that the wall can support the weight of the TV set and wall mount assembly e Follow the mounting instructions provided with the wall mount For certain models make sure to screw ysi 6u3 the hexagonal VESA wall mounting screw bosses and screws provided with the set into the nuts for the wall mount at the back of your set before your wall mounting e The TV set must be installed on a vertical wall e Make sure to use only screws suitable for the material of the wall Make sure that the TV set cables are placed so that there is no danger of tripping over them All other safety instructions about our TV sets are also applicable here Placing the TV on a table and other surfaces Before setting up your television set make sure that the surface you want to put the set on can support its weight Do not place the set on an unstable surface e g moving shelf very edge of a unit and make sure that the front of the television set does not overhang the surface it is standing o
24. ct Smart TV and press OK to enter the Smart TV portal Shortcut operation Press Smart TV on the remote control to access the Smart TV portal directly Note Since the connection with Internet takes time it s recommended that you wait a few minutes to use the Smart TV feature after activation of TV from standby EN 21 ysi 6u3 Chapter 8 Other information Password in Parental Control The default password is 1234 You can change it to a new one The super password is 0423 If you forget your code enter the super password to override any existing codes Troubleshooting Please check the following list before requesting service There is no picture or sound e Make sure the power cord is properly inserted in the power outlet e Make sure the source type is set correctly e Make sure the antenna is properly connected e Make sure the volume is not set to minimum or the sound is not set to mute e Make sure the headphones are not connected e The TV may be receiving a signal other than from TV broadcasting stations Picture is not clear e Make sure the antenna cable is properly connected Consider whether your TV signal is being properly received Poor picture quality can occur due to a VHS camera camcorder or other peripheral being connected at the same time Switch off one of the other peripherals The ghost or double image may be caused by obstruction to the antenna due to high rise building
25. de press the or POWER O button on the set or the button on the remote control to turn it on 2 To put the TV into standby mode press the or POWER O button on the set or the button on the remote control The TV set remains powered up but with low energy consumption 3 To switch the TV off unplug the mains plug from the mains outlet On certain models you have to turn on the power switch first EN 7 ysi 6u3 Chapter 3 Installing channels Initial setup Initial setup involves selecting all the settings required to be able to search for and store all the analogue and digital channels you can receive Make sure that the television is switched on and follow all the steps in turn specified hereafter Note If the channel search retrieved only the analogue channels it could be caused by poor broadcasting and therefore is not covered by manufacturer warranty Manufacturers cannot be held responsible for lack of or poor broadcasting in some areas The first time you switch the set on the Initial Setup wizard opens which guides you through the initial setup process Refer to Figure 1 Figure 1 Step 1 Environment setup 1 Press A to select your language then press OK gt to enter the next step 2 Press A to select your country then press OK gt to enter the next step Note If you select France or Italy you will have to enter the password setting menu here to set a password Use the numeri
26. dels have OK button on the set Volume Volume control press the V buttons on the remote control or the corresponding buttons on the TV set to increase or decrease the volume Sound mute press the button to temporarily mute the sound Press this button again or the V button to restore the sound Using TV menus 1 Press MENU on the remote control to display the homepage 2 Press A lt P gt to select Settings and press OK to enter the main menu Refer to Figure 2 Figure 2 3 Press A V to select the desired item then press OK to enter the corresponding submenu 4 In submenus press A V to select menu options then press OK gt to enter the option list the adjustment interface or the corresponding submenu 5 Press 5 to return to the previous menu Press EXIT or MENU to close the menu Note You can also press OPTION on the remote control select Settings if available and press OK to enter the main menu Some options may not be available for certain Signal sources Oo EN 10 select Settings gt System gt Menu language gt Language and press OK P to enter Press A to select your desired language to display the menus and press OK to confirm Press EXIT or MENU to close the menu Chapter 5 Using more of your TV Setting up your favourite channels You can create a list of your favourite TV channels 1 Press LIST 2 Press the red button to enter Select channel list press A t
27. e control select Settings gt Channel gt Teletext gt Digital teletext language and press OK P to enter 2 Press A to select a language and press OK to confirm 3 Press EXIT or MENU to close the menu E Manual E Manual is an electronic user manual for the product You can find instructions for the features of this TV set EN Using more of your TV 1 Press MENU or OPTION on the remote control select Settings gt System gt E Manual and press OK to enter 2 Press lt gt to select the contents and press OK to enter then press lt P gt to view the instruction pages Press 5 to return to the contents 3 Press EXIT to exit Time access You can access the time from digital channels following the instructions below 1 Press MENU or OPTION on the remote control select Settings gt System gt Timer gt Clock gt Auto synchronization and press OK P to enter 2 Press A V to select On and press OK to confirm 3 Press EXIT or MENU to close the menu Customising the input settings You can name your connected sources according to the type of device instead of the type of socket 1 Press MENU or OPTION on the remote control select Settings gt System gt Input settings and press OK P to enter 2 Press A to select a connector your equipment is connected to and press OK gt to enter 3 Press A V to select the type of device connected to this connector and press OK to confirm 4 Press EXIT
28. ect DVD player home theatre system wid Connect DVD recorder cable receiver 5 Connect Blu ray Disc player HD game console HD camcorder headphones CI module 5 Chapter 2 Getting started Remote control functions oeeseeeoeeeeer seere 6 Switch the TV n and off ossai eee 7 Chapter 3 Installing channels MMMItAL SETUP sierran ea e aE 8 Performing an automatic channel search 8 Chapter 4 Using your TV Accessing channels 2 seeceeeneeeeeeeeees 10 Watching connected devices eeeeeeee 10 VOUM speet asiani i a ERE 10 Using TV menus 10 Selecting menu language eeeeeeeee ees 10 Chapter 5 Using more of your TV Setting up your favourite channels 11 Energy saving 11 Local dimming 11 Viewing TV using the 3D function 11 SPDIF type sscsecsetvescsaxeciemeannednede secttandendvens 11 Audio description 12 Diagnostics on digital TV channels 12 TUMOSHITE dersinin aai 12 Using subtitles sa 12 Turning on off subtitles carines 12 Enabling subtitle languages on digital TV GhannNElS a poneren aiant inina naiean 13 Selecting a subtitle type on digital TV channels 13 USING TelCteXt 2 caciceeccteeiedie airinn viieni 13 Selecting decoding page language 13 Digital Teletext language seeeeeeeeee 13 E Manall siccsctscncetepelscpevsiedensacanonceasediaaa
29. ed under the libpng Project This product uses some software programs which are distributed under the Freetype Project This product uses some software programs which are distributed under the Freedesktop Project This product uses some software programs which are distributed under the ICU Project This product uses some software programs which are distributed under the SQLlite Project This product uses some software programs which are distributed under the zlib Project This product uses some software programs libxml2 which are distributed under the MIT This product uses some software programs which are distributed under the GPL LGPL MPL GPL software Linux Kernel gettext gtk libsoup webkit gtk atk glib pango glib networking libiconv pixman gnutls LGPL software libgcrypt enchant libgpg error cairo DFB DirectFB Legal Statement of TCL manufacturer of this TV set Due to the various capabilities of products featuring the SmartTV Services as well as limitations in the available content certain features applications and services may not be available on all devices or in all territories Some features on SmartTV may also require additional peripheral devices or membership fees that are sold separately Please visit our website for more information on specific device information and content availability The services and availability of content through SmartTV are subject to change from time to time with
30. go out Before you use the function connect a USB drive to the TV first For the first time you should do the disk setup for the USB drive Note This feature is available only in selected products and due to specific TV network limitations and country technical requirements might not be available in product or place of installation This feature might also be blocked by TV network due to copyright protection HD content recording protection Please press OPTION on the remote control to check if this feature is available in your product EN Using more of your TV Press MENU or OPTION on the remote control select Settings gt Channel gt Timeshift and press OK gt to enter Press A to select On and press OK to switch on the timeshift function then press EXIT or MENU to close the menu Press OPTION on the remote control and select Timeshift then press OK to confirm Follow the directions on the screen to do the disk setup After the disk setup is done press OPTION and select Timeshift Press OK to display the timeshift menu Press the PII button to pause the picture and begin the timeshift Press the Pll button to play the recorded part Press the lt lt button to fast backward or the gt gt button to fast forward When the timeshift menu disappears and only the timing of the timeshift remains on the screen you can press PI I 4 lt gt gt to access the timeshift me
31. h could otherwise be caused by inappropriate waste handling of these products For more information about collection points and recycling of these products please contact your local municipal office your household waste disposal service or the shop where you purchased the product Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation Business users If you wish to dispose of this product please contact your supplier and check the terms and conditions of the purchase contract Other Countries outside the European Union These symbols are only valid in the European Union If you wish to dispose of these items please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical equipment and batteries This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety TCL Operations Polska Sp z 0 0 ul A Mickiewicza 31 41 96 300 Zyrardow Poland Email address zyeee tcl com Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice EN Contents Important INFOFMALION sscan arasan 1 Chapter 1 Connections Connect the power and antenna 66 4 Conn
32. ion and press OK gt to enter 2 Press A V to select Home Shop or Shop with demo and press OK to confirm 3 Press EXIT or MENU to close the menu Note According to the regulation of European Commission 2009 125 EC in Home mode TV will be put into standby mode automatically if there is no operation in 4 hours This feature can be deactivated in the System gt Timer gt Auto standby menu Common interface Encrypted digital TV channels can be decoded with a common interface module and a card provided by a digital TV service operator The common interface module may enable several digital services depending on the operator and services you choose for example pay TV Contact your digital TV service operator for more information about services and terms Using the common interface module WARNING Switch off your TV before inserting a common interface module Be sure to follow the instructions described below Wrong insertion of a common interface module may damage both the module and your TV 1 Following the directions printed on the common interface module gently insert the module into the common interface slot on the TV Push the module in as far as it will go Turn on the TV and wait for the common interface function to be activated This may take several minutes Note Do not remove the common interface module from the slot Removing the module will deactivate the digital services Accessing common interfa
33. it the parameters of the selected satellite Press the 5 button to return Then with your desired options of Scan mode and Channels press A V to select the Search button and press OK to start scanning 5 The channel search may take a few minutes During the process you can press OK to stop the search halfway 6 After the automatic search channels are arranged in a preset order If you wish to skip channels modify the preset order rename or delete channels press MENU or OPTION on the remote control select Settings gt Channel gt Organiser and press OK gt to enter EN Installing channels ysi 6u3 Chapter 4 Using your TV Accessing channels Selecting menu language Using the numeric buttons press the corresponding You can choose your preferred menu language numeric buttons on the remote control to access the following the instructions below channels 4 Press MENU or OPTION on the remote control Using the P buttons press the P buttons on the remote control or the corresponding buttons on the TV set to scroll through the channels 2 Using the LIST button press the LIST button on the remote control to display the channel list and press 3 A lt gt and OK to select channels Watching connected devices Repeatedly press SOURCE on the remote control or OK on the TV set to toggle between TV and other input sources Press P to cycle through all TV channels and other input sources Note Not all mo
34. lable 1 Press A to select All then press OK gt to enter the main file content browser EN Using more of your TV 2 In the main file content browser use A W lt gt to select a file or an inner file folder 3 Select an inner file folder press OK to enter a sub file content browser 4 Use A lt P to select a file in either main or sub file content browser Press OPTION to display the function menu in folder mode Sort by Sort folders and files by Name or Date Parser You can select Recursive to display all supported files from all sub file folders DivX R Registration You can register or deregister this device 5 Select a file and press OK to play 6 Press 5 to return to the previous interface Picture Use this function to display pictures if available 1 Press A F to select Picture then press OK gt to enter the main file content browser 2 Use A lt gt to select a picture in either main or sub file content browser press OK to watch and a slide show begins from the selected picture 3 Press lt gt to display the previous or the next picture press to show the playlist and press OK to display the console 4 Press 5 to return to the previous interface Video Use this function to watch videos if available 1 Press A F to select Video then press OK gt to enter the main file content browser 2 Use Al lt gt to select a video in either main or sub file content
35. me Guide EPG is an on screen guide that displays scheduled digital TV programmes You can navigate select view and record programmes 1 Press GUIDE on the remote control the Program Guide menu will appear which allows you to get information about the current or next programme playing on each channel Navigate through the different programmes using the A lt gt buttons on the remote control Use the related buttons shown at the bottom of the screen to view EPG Prev day Press 44 to display EPG of the previous day Next day Press gt gt to display EPG of the next day Filter Programme guide filter for digital TV programmes e Press OPTION to display the type list of the programme e Navigate through the different types and available subtypes using the A V lt gt buttons on the remote control Select one or more types which you want to highlight from the Type list press OK to select or deselect A checkmark will appear to the left of the type when selected When you select a type all its subtypes if available will be selected accordingly Also you can select some desired subtypes if available without selecting any type first e Press OPTION to exit the type list e After filtering all your desired digital TV programmes will be highlighted Schedule list Press the yellow button to bring up the Schedule list menu e Press the red button to add a schedule e Press the green but
36. n To avoid TV from falling please fasten TV to the wall by using necessary screws in Vesa wall mount holes clamps anchors to be bought separately Install TV near to the wall to avoid falling backwards Multi product user manual The features described in this manual are common to most models Some features may not be available on your TV and or your TV may include features that are not described in this user manual The illustrations in this manual may differ from the actual product Please refer to the actual product Dear Customer Z Products R Pb Battery Notice The sign Pb below the symbol for batteries indicates that this battery contains lead Important information Information for Users on Disposal of Old Equipment and Batteries European Union These symbols indicate that the electrical and electronic equipment and the battery with this symbol should not be disposed of as general household waste at their end of life Instead the products should be handed over to the applicable collection points for the recycling of electrical and electronic equipment as well as batteries for proper treatment recovery and recycling in accordance with your national legislation and the Directive 2012 19 EU 2006 66 EC and 2008 12 EC By disposing of these products correctly you will help to conserve natural resources and will help to prevent potential negative effects on the environment and human health whic
37. nt recording protection Please press OPTION on the remote control to check if this feature is available in your product 1 Press OPTION on the remote control select PVR and press OK to enter Shortcut operation press the button on the remote control to enter PVR directly 2 Press the blue button to enter the Settings menu and press A lt gt to adjust the recording duration 3 During recording PVR mini pane will be shown on the screen to indicate the recording progress 4 Press the W button to stop the recording manually In normal operation the recording will stop automatically when the recording duration has passed 5 The record file is put into a folder named PVR on your USB drive To watch the recorded programme exit PVR mode first and enter Media from the homepage Select PVR then select the related record file and press OK to play Notes This feature is available only for non encrypted digital channels Even when CICAM CI or Cl is inserted this feature is not available on encrypted channels 16 Before you connect the USB drive to the set make sure you have backed up the data in the drive to avoid the loss of your important data due to unforeseen malfunction The bigger the USB drive free memory for the PVR function the bigger the recording length If you want to change channel or input source during recording store the recording data before changing the channel or input source
38. nu Press the button to quit the timeshift function Notes Before you connect the USB drive to the TV make sure you have backed up the data in the drive to avoid the loss of your important data due to unforeseen malfunction We recommend you use a USB drive with free capacity above 1GB and disk speed faster than 5 0MB sec The bigger the USB drive free memory for timeshift the bigger the recording length If you change the channel or the input source in timeshift mode a message prompts you to select Yes or No You can select Yes to stop the timeshift function and execute the channel change or the input source change Using subtitles You can enable subtitles for each TV channel Subtitles are broadcast via Teletext or DVB T DVB C digital broadcasts With digital broadcasts you have the additional option of selecting a preferred subtitle language Turning on off subtitles f 3 12 Press MENU or OPTION on the remote control select Settings gt Channel gt Subtitle and press OK gt to enter Select the Subtitle option press OK gt to enter press A to select On or Off and press OK to confirm Press EXIT or MENU to close the menu Enabling subtitle languages on digital TV channels 1 Press MENU or OPTION on the remote control select Settings gt Channel gt Subtitle gt Digital subtitle language and press OK P to enter 2 Press A F to select a subtitle language as your preferred language
39. o select a list and press OK to enter 3 Press A lt gt to scroll through the channel list and press the green button to add the selected channel to your favourite list 4 Repeat this procedure to set up other favourite channels 5 Press the red button to enter Select channel list select Favorites and press OK to enter 6 Press A lt gt to select a channel press OK to watch it or press the green button to remove it from your favourite list 7 Press LIST or EXIT to exit Energy saving 1 Press MENU or OPTION on the remote control select Settings gt Picture gt Auto dimming gt Energy saving and press OK P to enter 2 Press lt gt to select a desired power saving mode and press OK to confirm 3 Press EXIT or MENU to close the menu Local dimming available only in selected models Your TV is equipped with local dimming technology which increases local contrast and decreases power consumption Follow the steps below to access the local dimming 1 Press MENU or OPTION on the remote control select Settings gt Picture gt Auto dimming gt Local dimming and press OK P to enter 2 Press lt P gt to select On or Off and press OK to confirm 3 Press EXIT or MENU to close the menu Viewing TV using the 3D function not available for some models WARNING Some viewers may experience discomfort while viewing 3D TV such as dizziness nausea and headaches If you experience any such symp
40. omatic search then press OK P to enter Press A to select Channel type If you select Digital amp Analogue press OK to enter Press lt P to select your Scan mode if available Full or Advanced e If you select Full press A to select the Search button and press OK to start the automatic search for all DVB C digital and or analogue channels e If you select Advanced use the numeric buttons to adjust the values for Frequency Symbol rate Network ID and use lt gt to select the Modulation mode Then press A F to select the Search button and press OK to start the automatic search for all DVB C digital and or analogue channels If you select Digital follow the same process as above to start your automatic search for all DVB C digital channels If you select Analogue press OK to start your automatic search for all analogue channels b If you have selected Antenna Press A V to select Automatic search then press OK P to enter e Press A to select Channel type Digital amp Analogue Digital or Analogue then press OK to start the automatic search for all DVB T digital and or analogue channels c If you have selected Satellite e Press A V to select Automatic search then press OK P to enter e Press A F to select Select satellite and press OK to enter the satellite list Press A V to select your desired satellite and press OK to confirm or deselect it You can also press the red button to ed
41. out prior notice All content and services accessible through this device belong to third parties and are protected by copyright patent trademark and or other intellectual property laws Such content and services are provided solely for your personal noncommercial use You may not use any content or services in a manner 22 that has not been authorized by the content owner or service provider Without limiting the foregoing unless expressly authorized by the applicable content owner or service provider you may not modify copy republish upload post transmit translate sell create derivative works exploit or distribute in any manner or medium any content or services displayed through this device YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE DEVICE IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY PERFORMANCE AND ACCURACY IS WITH YOU THE DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED TCL EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE DEVICE AND ANY CONTENT AND SERVICES EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OF SATISFACTORY QUALITY FITNESS FORA PARTICULAR PURPOSE OF ACCURACY OF QUIET ENJOYMENT AND NON INFRINGEMENT OF THIRD PARTY RIGHTS TCL DOES NOT GUARANTEE THE ACCURACY VALIDITY TIMELINESS LEGALITY OR COMPLETENESS OF ANY CON
42. range Access points found by the TV will be displayed e Press A F to select an available access point then press OK gt to connect e Press 5 to return to the Wireless settings menu Note If you select a protected access point you will have to enter the corresponding password Press OK on the remote control to display the virtual keyboard to enable you to enter the password b Manual Press A to select Manual and press OK gt to enter You will be prompted to enter the correct SSID of an available wireless router to set up the connection Press 5 to return to the Wireless settings menu c Auto If your AP Access Point supports WPS Wi Fi Protected Setup you can connect to the network via PIN Personal Identification Number or PBC Push Button Configuration WPS will automatically configure the SSID and WPA key in either mode Press A to select Auto and press OK P to enter e PIN Select PIN and press OK gt to enter Choose a random PIN code Make sure this code is installed on the AP For the procedures refer to your router manual Select OK and press OK to set up the connection PBC If your router has a PBC push button select PBC and press OK P to enter Press the PBC push button on your router within 2 minutes before you select OK and press OK again Your TV will automatically acquire all the network setting values it needs and connect to your network EN 18 e Press 5 to return to the Wi
43. re in the same home LAN local area network or network segment 4 Run the TV Remote application on the laptop it will search and communicate with the TV automatically to enable the TV Remote functionality 5 Once the TV and the laptop are linked as described in step 4 you will be able to enjoy the extra features of the TV Remote function To quit the TV Remote function press EXIT on the remote control WiFi TV link not available for some models WiFi TV link allows you to share screen and sound of your device such as a smartphone or a tablet to your TV wirelessly i e without cables This makes it possible to view on your TV at the same time what your smartphone or tablet is showing For example you can launch a video on your smartphone and display it simultaneously on your TV or use your tablet as game controller with content displayed on the big screen of your TV Whenever you want to use WiFi TV link you must first activate this function in your TV To do it follow the steps below 1 Press MENU or OPTION on the remote control select Settings gt Network gt WiFi TV link and press OK to enter You will see details for this function 2 Find the WiFi TV link function in your device Different devices may have different names for this function 3 Then click the connection function on the device If connected successfully you will see on your TV screen what the device is showing Note TCL does not
44. reless settings menu Press 5 to return to the Network menu 6 If you want to check the information on current connection such as Interface Address type IP address etc press A V to select Information and press OK gt to enter Press 3 to return to the Network menu 7 If you want to check the Internet connectivity press A Y to select Connection test and press OK gt DLNA Share amp See Note This manual covers products with either Share amp See or DLNA function Share amp See is DLNA compatible Connecting to your PC Make sure to set up a wired or wireless connection from your TV to a router first Then connect your PC to your router either through a network cable or wirelessly Also make sure to select Network gt Internet connection and select On and that your computer firewall won t block the connection Enabling DLNA function Press MENU or OPTION on the remote control select Settings gt Network gt DLNA and press OK gt to enter Press A V to select On and press OK to confirm Follow the steps in turn specified hereafter then you can enjoy recorded videos images and music saved on your PC Adding media from your PC for sharing Install a DLNA media server on your PC The simple and familiar server you may install is Microsoft Windows Media Player 11 and 11 above Follow the instructions below to allow your TV to access the designated files on your PC 1 Open the Microsoft Windows Media Pl
45. renayd 13 Time access 13 Customising the input settings 13 Software update cecceceecec eee eeeeeeeeeeeeeeee 13 Changing to shop or home mode 14 Common interface 2c cece 14 Using the common interface module 14 Accessing common interface services 14 DIVX VIGGO 2 ssicvsntetknccncesoncenavee trainee iais 14 Ge LT ea ne ee re ee 14 Enabling or disabling T Link 14 Using one touch play 14 Using system standby 14 Reset shop 5658 15 EBEDUINGICALOR dsssstonsctinssiamesstuasiilnauntaabedices 15 Viewing pictures playing music and watching videos from a USB storage device 1 PE teranse e 1 Picture 1 Video 1 MUSIC a cxccetsentaas stecaddersiesehende tinder cncuneds si d Using EPG Electronic Programme Guide 1 PVR Personal Video Recorder 16 MHL Mobile High Definition Link 17 Connecting MHL compatible device 17 When using MHL 0ccccccceeeeeee eee eeeeeeees 17 MHEG function aiiis aisinada sinia 17 Chapter 6 Network Network connetto eiiie 18 Connecting to a wired network 18 Connecting to a wireless network 18 DLNA Share amp See aiias si 19 Connecting to your PC seacais 19 Enabling DLNA function eeeeeeee eee ee 19 Adding media from your PC for sharing 19 DENA pplication ncicccssesascsiaswsnncasuederaaaiucanss 19 GUJ ON siersasas cca sca mean ASE nde
46. ress OK gt then press lt to adjust the delay time to synchronize the sound with the picture Audio description Audio description refers to an additional narration track for blind and visually impaired viewers of visual media including television programmes and movies The description narrator talks through the presentation describing what is happening on the screen during the natural pauses in the audio and during dialogue if deemed necessary You can use this feature if the current broadcast contains audio description 1 Press MENU or OPTION on the remote control select Settings gt Sound gt Advanced settings gt Audio description and press OK gt to enter 2 Select the Audio description option press OK gt to enter press A V to select On or Off and press OK to confirm 3 To adjust the volume for audio description in case this function is turned on press A V to select Volume press OK gt then press lt gt to set the volume 4 Press EXIT or MENU to close the menu Diagnostics on digital TV channels 1 Press MENU or OPTION on the remote control and select Settings gt Channel gt Channel diagnostics 2 Press OK P to display some signal information on the current digital channel such as signal strength frequency etc 3 Press OK to confirm 4 Press EXIT or MENU to close the menu Timeshift Allows you to record digital TV programmes so that you will not miss the favourite part even if you
47. s or hills Using a highly directional antenna may improve the picture quality The horizontal dotted lines shown on the pictures may be caused by electrical interference e g hair dryer nearby neon lights etc Turn off or remove these Picture is too dark too light or tinted e Check the colour adjustment Check the brightness setting e Check the sharpness function Remote control does not work e Check the batteries of the remote control e Make sure the remote sensor window on the TV front is not under strong fluorescent lighting e Try to clean the remote sensor window on the TV front with a soft cloth If the above suggestions do not solve your technical issue please refer to the warranty card for service information Television specifications PAL SECAM BG DK I LL VHF UHF Cable Frequency synthesized TV Broadcasting Receiving channels Tuner type EN Operating Conditions Temperature 5 C 35 C 41 F 95 F Humidity 20 80 non condensing Storage Conditions Temperature 15 C 45 C 5 F 113 F Humidity 10 90 non condensing OSS Notice This product uses the GPL Version 2 and LGPL version 2 0 and 2 1 and MPL version 1 1 To send inquiries and requests for questions regarding open source contact nearest TCL office This product uses some software programs which are distributed under the Independent JPEG Group This product uses some software programs which are distribut
48. t Note Do not connect the MHL compatible device to any ports other than the HDMI port identified with MHL When using MHL e Interoperability with MHL devices from other manufacturers is not guaranteed TCL does not provide any guarantee therefore against operational failure such as that described below when an MHL source is connected to the TV No picture or sound Using more of your TV Some of the functions do not work by remote operation from the TV If MHL does not work properly also contact the manufacturer of the source device for advice on its use Do not disconnect the power plug of the TV when the TV is active and the MHL device is connected Do not disconnect the power plug of the TV when the TV is in standby mode and the MHL device is connected MHEG function Some digital TV broadcasters offer dedicated digital text or interactive services for example BBC1 These services work like normal Teletext with the addition of number colour and navigation buttons Note MHEG and subtitles are mutually exclusive and cannot coexist on the same screen If Subtitle is set to On MHEG will not appear Please follow the instructions in the section Turning on off subtitles to set Subtitle to Off Press the red button or TEXT on the remote control Press A lt gt to select or highlight items Press OK to confirm or activate Press one of the colour buttons to select an option Press TEXT or EXIT
49. t sources will shine directly onto the screen The or POWER button on the TV set or the button on the remote control can be used to switch it on and put it into standby mode If you are not going to be watching the TV for a lengthy period of time switch it off completely by removing the plug from the mains power socket During thunderstorms we recommend that you disconnect the TV set from the mains and aerial so that it is not affected by electrical or electromagnetic surges that could damage it For this reason keep the mains and aerial sockets accessible so they can be disconnected if necessary Unplug the TV set immediately if you notice it giving off a smell of burning or smoke You must never under any circumstances open the TV set yourself as you run the risk of an electric shock in doing so TV screen The TV screen used in this product is made of glass Therefore it can break when the product is dropped or impacted upon by other objects The TV screen is a very high technology product giving you finely detailed pictures Occasionally a few nonactive pixels may appear on the screen as a fixed point of blue green or red This does not affect the performance of your product Care Use a glass cleaning product to clean the screen and a soft cloth and mild detergent to clean the rest of the set Important Using strong detergents alcohol based and abrasive products may damage the screen Dust the vents at the ba
50. ted programme guide by informing you as to which television content is available such as cast and related information 1 Press MENU or OPTION on the remote control select Settings gt Network gt GuideOn and press OK gt to enter 2 Press A V to select On and press OK to confirm then press EXIT or MENU to close the menu 3 Press GUIDE on the remote control to display the network EPG page It contains three tabs On Going Guide and Reminders Press lt P gt to select a tab Press OK to enter 4 To quit the EPG press EXIT on the remote control Note To use network EPG make sure the Internet is connected In case Internet is connected and GuideOn is turned on network EPG replaces local EPG as described in section Using EPG Electronic Programme Guide when you press the GUIDE button TV Remote This function allows you to turn a smart device into a sophisticated remote control providing more features than your normal TV remote control You can then control your TV through your smart device 1 Press MENU or OPTION on the remote control select Settings gt Network gt TV Remote and press OK to enter You will see details for downloading the TV Remote application and other related information 19 ysi 6u3 Note The following instructions are based on the example of a laptop 2 Download and install into the laptop the correct TV Remote application for the laptop 3 Make sure the laptop and the TV a
51. tom stop viewing 3D TV remove your 3D glasses and rest e Watching 3D videos too closely or for a long period of time may harm your eyesight A responsible adult should frequently check on children who are using the 3D function Do not use the 3D glasses for any other purpose than viewing 3D videos on a 3D TV Do not use the 3D function or 3D glasses while walking or moving around otherwise this may result in injuries due to running into objects tripping and or falling EN 1 Press MENU or OPTION on the remote control select Settings gt Picture gt 3D navigation and press OK gt to enter Press lt gt to select Manual and press OK to confirm 2 Press A F to select 3D in the Picture menu and press OK P to enter 3 Wear the 3D glasses first then select 3D Mode and press OK gt to enter Press lt gt to select the desired 3D input format for the playing of 3D video and press OK to confirm 4 Press A to select other menu options 3D to 2D Select On to display 3D image in 2D mode no 3D effect L R switch Select On or Off to adjust the 3D video between the left and right eyes for better 3D viewing Depth of field This option is available only in 3D mode You can adjust it to achieve a good 3D effect with the image 5 Press EXIT or MENU to close the menu Notes 3D glasses from other manufacturers may not be supported All photo functions are disabled in 3D mode If you change to a
52. tton to delete a selected schedule e Press OK to edit a selected schedule Add schedule Press the red button to add a schedule into your schedule list e Channel number use lt gt to select the desired channel Start date use the numeric buttons to set the start date e Start time use the numeric buttons to set the start time EN Using more of your TV End time use the numeric buttons to set the end time Schedule type use lt P gt to select the available schedule type Select Reminder to be reminded that you can switch to the scheduled programme when the time you have set comes Select Record if available if you want to start your scheduled recording when the time you have set comes When time is out and you do not execute any operation scheduled recording will start automatically e Repeat type use lt P gt to select different repeat mode for the schedule Press A to select Add schedule and press OK to confirm 3 Press GUIDE or EXIT to exit EPG PVR Personal Video Recorder Allows you to record your favourite TV programmes Before you use the function connect a USB drive to the set first Note This feature is available only in selected products and due to specific TV network limitations and country technical requirements might not be available in product or place of installation This feature might also be blocked by TV network due to copyright protection HD conte
53. turer or his service agent or a similar qualified person in order to avoid a hazard Leave more than 10cm clearance around the television to allow adequate ventilation The ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Batteries shall not be exposed to excessive heat such as sunshine fire or the like An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection To prevent the spread of fire keep candles or other open flames away from this product at all times WARNING To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions CAUTION Connect headphones with the volume set low and increase if required Prolonged listening through headphones at high volume settings can result in hearing damage EN Eye Fatigue When using this product as a computer monitor health and safety experts recommend short frequent breaks rather than occasional longer breaks For example a 5 10 minute break after an hour of continuous screen work is considered to be better than a 15 minute break every 2 hours Do not use the monitor against a bright background or where sunlight or other bright ligh
54. y TCL is neither responsible nor liable for customer service related to the content and services Any question or request for service relating to the content or services should be made directly to the respective content and service providers CE TCL declares that this TV is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC if delivered with WiFi access built in or USB dongle The official declaration of conformity may be found at www thomsontv eu in support area EN 23
Download Pdf Manuals
Related Search