Head-End Modulator FM 2xSAT+ASI to 12xFM
Contents
1. gt The Factory reset FACTORY main menu is activated ass 27 HDTV 1000 FM FACTORY RESET In this menu you can reset all settings to the factory defaults Bx 4 FACTORY Defaults gt Bx 4 FACTORY STORE gt M e Press the D button gt The submenu FACTORY STORE is invoked gt By pressing the MODE button you will be returned to the menu item Input parameters INPUT without invoking the factory defaults page 16 e Press the button gt The factory defaults are saved The display shows STORE gt Back to Selecting the cassette page 15 gt By pressing the MODE button you will be returned to the menu item Input parameters INPUT without invoking the factory defaults page 16 SAVING SETTINGS e Press the JJ button gt Back to Selecting the cassette page 15 gt The settings are saved ess 28 HDTV 1000 FM 6 FINAL PROCEDURES After installing the head end station upgrading accessories or installing cas settes it is necessary to tighten all cable connections cable terminals and cover screws in order to maintain compliance with current EMC regulations securely e Securely tighten the cable bolted connections using an appropriate open ended spanner e Mount the front cover see assembly instructions of the head end station ass 29 HDTV 1000 FM ss Declaration of CE conf2. gt auto 31 091 FM 12 AUDIO reka FM 01 12 um 1091 Pr VIDEO FM 12 01 A 14 091 Sr FM01RA 001 091 a rig LUME Bayern 1 UDIO FM 01 12 FM 12 VOLUME AUDIO FM 12 01 AUDIO PS a FM 01 AUDIO 2 a UDIO MULTI pm 01 12 Lovo ger LUME FM 12 AUDIO AUTO VIDEO LUME 7 AUTO FM 12 01 lt LUME EI FM 01 VOLUME Ad SAME 0 0dB lt gt C NAME FM 01 12 AUDIO FM12 RDS NAME auto VIDEO Pe AUDIO AUTO 7 gt auto FM 12 01 UDIO AUTO SS FM 01 AUDIO AUTO ba AUTO FM 01 12 AME VIDEO a NAME auto FM 12 01 NAME auto FM01 RDS NAME auto Bayern 1 gt auto FM 01 12 VIDEO FM 12 01 v e Press the D button gt Submenu Output frequency FREQ is activated J23 HDTV 1000 FM OUTPUT FREQUENCY In this submenu set the output frequencies of the programme locations FM 01 FREQ 87 50 gt auto e Use the DD buttons to place the cursor under the digit to be set for the frequency display then use DTD to set the output frequency wished gt Via the auto function it is possible to set the output frequencies of the following programme locations automatically in 300 kHz steps from the displayed programme location on auto function e Press the D button gt The output frequencies of the following programme locations are set automatically e Press the ID button gt The Channel selection 001 xxx submenu is activated CHANNEL S
3. Input symbol rate 2 0325 c5nvohiendetananinensedhsatscndantenasiunadedbspustedesiciasinases 17 EE 17 Setting the input frequency W u u ssse cana bdhestearinnavs cdea eer 18 Operation with CA module nase ae 19 PID Monitoring sussie EER EE se onen ernennen nennen 19 CA OC UNG ys einer EEEE ears 19 Delete programme lsealans nenen ee 21 Programme OGGHONS en 22 Submenus output parameters een 22 Output MEGQUERGY Ee ore E ore ere eee nere 24 EE 24 language Eeer san nee 25 Frequency deviation adjustment ccccceseceeseeeeeeeeeteeeeteeeneeeens 25 Kindsof transmission nee innen 26 RE 26 Output level ernn eerste attente dE geen 27 Factory E 28 Saving E EE 28 6 Final procedurer etegeetiengenecengeer ee ee 29 css BER HDTV 1000 FM It E gt SAFETY REGULATIONS AND NOTES Assembly installation and servicing should be carried out by authorised electricians Switch off the operating voltage of the system before beginning with assem bly or service work or pull out the mains plug Do not perform installation and service work during thunderstorms Install the system so it will not be able to vibrate ina dustfree dry environment in such a manner that it is protected from moisture fumes splashing wa ter and dampness somewhere protected from direct sunlight not within the immediate vicinity of heat sources in an ambient temperature of O C to 50 C In case of the formation of condensatio
4. activate the menu of the CA module The menu varies according to which CA module you are using For this rea son please refer to the operating manual of your particular CA module The relevant information is shown in the display of the head end station This may appear as a fixed display or as scrolling text according to display capabilities Bx 4A CA MENU en Bx4A 01 05 MENU lt EES i PID Check on gt lt A Information 292 HDTV 1000 FM gt The display shows e g Bx4 01 05 MENU Information Meaning of the indicators Bx 4 Slot 4 01 05 The first of five menu items is activated MENU The menu of the CA module is activated For the explanation of further details please use the operating instructions of the CA module used Use the DD buttons to activate the menu desired Press the D button to activate the menu Use the DD buttons to select the function desired To set the CA module use the DD and B E buttons All settings are saved by pressing the JJ button gt You will be returned to the PID monitoring CA main menu gt By pressing the MODE button you can cancel the settings in the menu of the CA module and are returned to the PID monitoring CA main menu Press the IIS button gt You will be returned to the Input parameter INPUT main menu page 16 Press the ISIS button gt The menu Delete programme locations SERVICES is
5. activated ess 20 HDTV 1000 FM ess DELETE PROGRAMME LOCATIONS In this menu you can delete the programme locations preset in the factory resp old programme locations e g if the input parameter setting was changed Bx 4 SERVICES FM gt CLEAR ALL e Delete the programme locations using the D button gt All programme locations are deleted the stored FM frequencies will be remain As long as no radio station is assigned to a programme location the transmitter is switched off gt A Factory Reset resets to the programme locations preset in the factory e Press the MODE button gt The Output parameters FM 01 menu is activated J2 HDTV 1000 FM ss PROGRAMME LOCATIONS SUBMENUS OUTPUT PARAMETERS In this menu the programme locations of the 12 FM transmitters together with its transmitting frequencies are displayed In addition you have access to the submenus to set the output parameters of the 12 Services programme loca tions FM 01 87 50 Bayern 1 gt Programme locations gt The Display shows e g FMO1 87 50 Bayern 1 Meaning of the indicators FM 01 Programme location FM 01 87 50 Transmitting frequency in MHz Bayern 1 Channel name of the channel set to this programme location gt Access to the submenus for the output parameters Output frequency channel selection Lan guage selection Kind of transmission and RDS via butto
6. program item Selecting the cassette from any menu Any entries that have not been saved are reset to the previous settings gt Entries in the menus can be saved by pressing the HI key You are taken back to the Selecting the cassette menu item gt Pressing the AUDIO button returns to the previous menus e Switch on the head end station BE Remote V 44 please wait t gt 10s A gt The display shows the software version e g V 44 gt The processor reads the cassettes data approx 10 seconds SELECTING THE CASSETTE BOX 52 X m Box 4 DVBS2 FM BOLS nioni SE d Be e Select the cassette you want to program e g Box 4 by repeatedly pressing the button DIE if necessary gt The display shows e g the menu Box 4 DVBS2 FM Box 4 stands for slot 4 DVBS2 FM type of cassette Aa software version of the cassette e Press the IIS button gt The Input parameters INPUT main menu is activated ess 15 HDTV 1000 FM INPUT PARAMETERS In this menu you select the input for which you would like to set the input pa rameters in the submenus Bx 4 INPUT TunerA OK gt gt The indication OK serve for information OK input signal is present at tuner A e Use the DI buttons to select the input Tuner A Tuner B ASI for which you woul
7. sub menus D D D DU scrolls backward through the menus E l mn VIDEO DI saves all entries ass 12 HDTV 1000 FM 5 Pr GRAMMING 3 1 PROGRAMMING PROCEDURE Ein On Y BE Remote V 44 Bedienhinweise Operating Hints J EOJ bl ttert Men s vorw rts EC scrolls forward through the menu please wait EWE blattert Men s r ckw rts WEITEN scrolls backward through the menu DID w hlen die Eingabeposition ID select the enter position t gt 10s D w hlt Untermen D selects a submenu A A H stellen Werte ein JB set values and triggers actions E D speichert alle Eingaben D saves all entries S zeigt die Eingabeposition 4 shows the enter position Y rr Box 4 DVBS2 FM Boxster DB v1 eect su t 14 LE poge y 4 Bx 4 INPUT Bx 4A B LNB DI o pg Tuner OK gt 10600 MHz DI Tuner A A Tuner B MODE 9750 10600 A ASI d Bx4AlB SYMBOL B E pve s apsk 27500 DVB S DIR 8Psk DTV 22000 27500 MODE Y Bx 4A B FREQ pm 12265 0 3 CN13 D E MODE ere EE 1 Bx 4A CA MENU E gt Bx 4A 01 05 MENU i PID Check on gt I lt BJ Information I I 1 A H 1 1 I EES ma BP i i HJE nur mit CA Modul Die angezeigte Information ist abhangig nur Tuner A vom verwendete
8. AL DATA The devices meet the following EU directives 2006 95 EC 2004 108 EC The product fulfils the guidelines and standards for CE labelling see page 30 Unless otherwise noted all values are specified as typical HF Input Frequency range csecseeerseeeeeeeeeeeeeeeeeeeeeeeceeeeeeeeeees 925 2150 MHz level Tange nern 60 dBpV 80 dBpV EEN 750 DVB S modes en QPSK 1 2 2 3 3 4 5 6 7 8 DVB S2 modes QPSK 1 2 3 5 2 3 3 4 4 5 5 6 8 9 9 10 8PSK 3 5 2 3 3 4 5 6 8 9 9 10 Symbol rate DVB S nenne QPSK 2 45 MSymb s Symbol rate DVB S2 000 QPSK 10 30 MSymb s 8PSK 10 31 MSymb s HF output Frequency TONGS an 87 50 MHz 108 00 MHz Toning Sieps een 50 kHz Ter Gm Eben neuen ESEN ER Ee FM huert eebe 8 dB Output level nee 93 dBpV Signal to harmonics ratio ccccccccessceceeseeeceseeeeeseneeeeeeseeeeeeteeenses gt 60 dB ass A HDTV 1000 FM Un EE 750 External voltage difference Ue Lo eee neat eege 66 dB SIETE O eaii aa a a a e a a a e 53 dB Non linear distortion factor MOO EE 0 06 E EE 0 6 Overall output frequency deviation u udssssesseeeeeerererrerrrree 75 kHz FM modulator Number of available services programme locations 12 RDS signal processing EE 57 kHz Pla anal ee ee 19 kHz Pee MR ASS na ee ae er 50 ps ASI Schnittstelle Kl DIN EN 50083 9 Formale MPEG ISO IEC 13818 1 edel 75 0 Wee ridata rates ects ievei
9. ELECTION In this menu you assign which of the channels available via tuner A tuner B and ASI is transmitted via the corresponding programme location FM 01 RA 001 091 Bayern 1 Meaning of the indicators FM 01 Programme location FM 01 RA Radio channel 001 091 Channel 1 of 91 Bayern 1 Programme name of channel 1 ass 24 HDTV 1000 FM ss e Use the DTD buttons to select the channel wished gt To switch off the modulator of a programme location the channel selection must be set to 000 gt Indication FM 01 _ 091 As long as no radio station is assigned to a programme location the transmitter is switched off e Press the lie button gt The Language selection AUDIO submenu is activated LANGUAGE SELECTION If more than one languages are available in this submenu select the language wished e g language 1 of 1 German FM 01 AUDIO 01 01 ger e Use the DD buttons to select the language wished e Press the MONE button gt The Frequency deviation adjustment VOLUME submenu is ac tivated FREQUENCY DEVIATION ADJUSTMENT In this submenu you can adjust the deviation This has effects for the volume FM 01 VOLUME 0 0 dB lt gt C e With buttons DIE adjust the frequency deviation in 0 1 dB steps 25 HDTV 1000 FM Meaning of the indicators lt Frequency deviation too small Frequency deviation OK GE Frequency devia
10. Fasten the cassette with the screws 1 Ei SIS Ei D A a E i o eu den e ei Je giaielelelel The oE E E Ho E O Ho KO E Me e o o o o a ofl o D a S BA Si Dee eo o oo oo ee o 0080 CC 8 HDTV 1000 FM 3 2 EMC REGULATIONS N To comply with the current EMC regulations it is necessary to connect the lines KLASSE CLA o leading in and out of the head end station using cable terminals When mounting the cassette in a head end station which is installed in a 19 cabinet make sure the connections leading in and out for the 19 cabinet are made using cable terminals The attenuation of shielding of the connection lines for ASI and antenna must meet the requirements for Class A Gogoan e Insert the required number of cable terminals in the openings provided in the head end station or in the 19 cabinet Tighten the nuts on the cable terminals until the teeth on the lock washer have penetrated the exterior coating and a good connection is made between the hous ing and cable terminals 9 HDTV 1000 FM 3 3 CAS
11. GSS Grundig SAT Systems Head End Modulator FM 2xSAT ASI to 12xFM HDTV 1000 FM 2 GSS Phone 49 0 911 703 8877 Grundig SAT Systems GmbH Fax 49 0 911 703 9210 Lu Beuthener Strasse 43 E mail info gss de Assembly Instructions D 90471 Nuremberg Internet http www gss de CONTENTS Safety regulations and notes cscssisssescacsssessssncsssssersuassassssbsnssesescasnssensssvencsduesssecs 3 2 General information 4 Sc Packing RER A 22 Meaning of the symbols Besd n en en 4 23 Technical Etage andes iWon Ae 4 2 4 Dees SHON ascsecetcasitsdhcesdeeiei pet Aere Ree Gebeess 6 25 been AE 7 3 Assembly na 8 3 1 Installing the cassette ccnnesesseesneeennnnesnnnennen ernennen nennen nenne 8 3 2 EMC E 9 33 Cassette OVErVieW naneennenseneneneeeensenenennenenn a aa NA EESE enormen 10 3 4 Connecting the cossete een annnn 10 3 5 Retrofitting a CA module 00 ccccccccccecceeeseneeecenseeeeesssseeeeesseeeensneeees 11 4 The control panel at a glance u a 12 4 1 Men eis gaar rare arr needed 12 4 2 Control HANS rr r E runner br ner ERE T 12 KO El ics csacescciecccssicesccddecsccdivesssiccosscdsensasceeatesedsecacoducceccdueresedcccesescesceasds 13 GT Programming pressdure nun 13 5 2 Programming the casselle innen 15 Selecting the cassette ccnenesnsessennnessnsnneeenennnennennneneenennee nennen 15 tele 16 LNB oscillator frequency ccceeccceesceessceeneeeeneeeeneeeensaeenseeeeeeens 16
12. SETTE OVERVIEW D SUB socket RS 232 Slot for CA module not used ASI input not used SAT input tuner A Status LED of input A SAT input tuner B Status LED of input B The operating software of the cassette can be updated via the 9 pin D SUB socket RS 232 using a PC or notebook and the software BE Flash You can find the current operating software OEOWMO Q QOOWO on the website www gss de 3 4 CONNECTING THE CASSETTE e Connect the SAT input sockets A tuner A and B tuner B to the cor responding output sockets of the input distributor Use a 6dB attenuator for a direct connection without the input distributor e Connect the ASI socket e Connect the head end station to the mains ass 10 HDTV 1000 FM 3 5 RETROFITTING A CA MODULE Gs The cassette is equipped with a common interface It allows you to connect a CA module for various scrambling systems and service providers Scrambled stations can only be descrambled with a CA module suitable for the scram bling system and the corresponding smart card The smart card contains all the information for authorisation descrambling and subscription Caution Check with the distributor or manufacturer of the CA module to be used to ensure that it is suitable for descrambling several channels Any changes made by programme providers to the structures in the pro gramme data might impair or even prevent this functi
13. Yellow Signal quality is poor Red No signal To operate this cassette the software version of the control unit must be V 44 or higher You can find the current operating software for the control unit and the cassette the software BE Flash and the current assembly instructions on the website www gss de The cassette is designed for use in head end stations of the standard line 6 HDTV 1000 FM 2 5 SOFTWARE QUERY Control unit If necessary you can activate the indication of the software version of the control unit manually e Press any two keys on the control unit of the head end station simultaneously until the display goes dark and the software version e g V 44 appears Cassette After activating the cassette the software version of the cassette is displayed see page 15 ass 7 HDTV 1000 FM ees ASSEMBLY INSTALLING THE CASSETTE Ensure the head end station is mounted so it will not be able to vibrate Avoid for example mounting the head end station onto a lift shaft or any other wall or floor construction that vibrates in a similar way Before installing or changing a cassette unplug the power cable from the mains power socket Remove the fastening screws 1 of an unoccupied slot from the bracket of the head end station Insert the cassette in this slot and push it into the housing Align the cassette and apply slight pressure to connect it to the connections of the board and the HF bus bar
14. atibilite electromagnetique Al a fn Se Se ennen Leiter Entwicklung Manager Development Directeur D veloppement Niirnberg 8 Februar 2011 30 HDTV 1000 FM Service Phone 49 0 911 703 2221 Fax 49 0 911 703 2326 Email service gss de Alterations reserved Technical data E amp O E by GSS GmbH V1 17112010
15. ce es geseis se EC ER EEN 2 90 Mbit s LEV E 800 mVpp RETURN Jee gt 17 dB 5 270 MHz Anschliisse SAT AE 2 F Buchsen HF SUB EE ane 1 IEC Buchse ele 1 BNC Buchse eent tee Eege 10 pin For supply voltages and control circuits Update interface uuunnsssssssnnessnnneessnneneenneneenenenenn Buchse RS 232 Common erfeiert 1 Several channels can be descrambled Remote maintenance Remotely controllable via PSW 1000 W uW u udssssneneeeeneeeerenrerere rr rnerenee yes Remote update via Boch yes and a corresponding management unit a Bir HDTV 1000 FM 2 4 css DESCRIPTION The cassette converts 12 stereo audio channels from two DVB S DVB S2 stand ard modulated transponders and the ASI input signal into 12 FM modulated stereo output channels The RDS station code is automatically taken from the station name of the trans ponder or can be entered manually Via SAT input A and a corresponding CA module scrambled channels can be descrambled Principle signal path Receiving stage TS A A CA module TS B SAT input A g Receiving stage SAT input B H B D HF output TPS 12 fold modulator Combiner TS ASI ASlinput g The cassette is controlled with the head end station control unit Two LEDs indicate by their colour the quality of the input signals see figure on page 10 Green Signal quality is good
16. d like to set the input parameters gt There are no input parameter settings for the ASI input Select ASI in order to check whether a ASI input signal is present OK is displayed gt To skip the settings of the input parameters press the MODE but ton The Delete programme locations SERVICES main menu is activated page 21 e Press the D button gt The LNB oscillator frequency LNB submenu is activated LNB OSCILLATOR FREQUENCY Set the oscillator frequency of the LNB used in this menu Bx 4A 5 LNB 10600 MHz Using the button the oscillator frequencies 10600 or 9750 can be selected directly To set other oscillator frequencies use the HD buttons to place the cursor under the digit of the oscillator frequency displayed to be set Press E E to enter the respective digit of the oscillator frequency of the LNB used Repeat the procedure by the quantity of the digits to be set ass 16 HDTV 1000 FM e Press the MODE button gt The Input symbol rate DVB mode SYMBOL menu is activated INPUT SYMBOL RATE DVB MODE The symbol rates of the satellite transponders can be found in the current chan nel table of the satellite operator in various satellite magazines and in the Internet The cassette recognizes the transmitted DVB mode and switches over between the normal QPSK mode DVB S and the DVB S2 mode Receiving stations with DVB S2 mode we suggest to prese
17. n CA Modul I only with CA module The information displayed is dependent i only tunerA on the CA module used Y Bx 4 SERVICES FM gt CLEAR ALL E Sr 213 HDTV 1000 FM FM 01 f Bayern 1 EEN FM 01 12 EEE rm 12 01 SEES FM 01 FREQ fi gt gt u 87 50 gt auto DIE FM 01 12 REE Fm 12 01 DE bd FM01RA 001 091 DIR Bayern 1 Senderauswahl Station selection KUE FM 01 12 REE Fm 12 01 A Y FM 01 AUDIO 01 01 ger Sprachauswahl DIR Language selection De FM 01 12 E Fm 12 01 A A FM 01 VOLUME Hubanpassung GEI Deviation adjustment D FM 01 12 R Fm 12 01 A OVIA zu klein too small OK zu gro too big Begrenzung clipping Y FM 01 AUDIO DI AUTO AUTO MONO STEREO FM 01 12 FM 12 01 D Y FM01 RDS NAME DO DI Bayern 1 gt auto FM 01 12 FM 12 01 Y Bx 4 LEVEL PD odB B E o 10aB reet Seite 13 x auf Werkseinstellung A Bx 4 FACTORY Bx 4 FACTORY um zur cksetzen und speichern Defaults gt STORE gt M reset to factory defaults and store MODE ma css TTA HDTV 1000 FM 5 2 PROGRAMMING THE CASSETTE gt Pressing the MODE button for longer than 2 seconds cancels the programming procedure This takes you back to the
18. n D e Select the programme locations in ascending order via buttons or UUS in descending order via buttons Ej or MEE Output parameters gt In order to skip the output parameter settings press button MODE Ff The Output level LEVEL menu os activated page 27 The output parameter settings are to be done for each of the 12 programme locations The programme location is displayed in the upper left corner e g FM 01 means programme location 01 3225 HDTV 1000 FM In every submenu it is possible to rotate through the 12 programme locations using buttons USER ascending and AES descending Navigation between the submenus is possible via buttons SI next menu and EXE previous menu FM 01 87 50 FM 01 FREQ FM 12 87 50 FM 12 FREQ auto Pas gt Pa gt auto A ca r Ei 31 091 FM 04 87 50 Fm 04 FREQ FM12RA 001 091 FM 03 87 50 FM 03 FREQ auto Ba FM 02 87 50 FM 02 FREQ auto Sr FM 01 87 50 FM 01 FREQ auto a x D ag AUDIO gt ayern ES 87 50
19. n wait until the system is completely dried Ensure that the head end station is adequately ventilated Do not cover the ventilation slots Beware of short circuits No liability is accepted for any damage caused by faulty connections or inappropriate handling Observe the relevant standards regulations and guidelines on the installa tion and operation of antenna systems The standards IEC EN DINEN 50083 resp IEC EN DINEN 60728 must be observed For further information please read the assembly instructions for the head end station used Test the software versions of the head end station and the cassette and update them if necessary The current software versions can be found at www gss de Take action to prevent static discharge when working on the device Electronic devices should never be disposed of in the household rubbish In accordance with directive 2002 96 EC of the European Parliament and the European Council from January 27 2003 which addresses old electronic and electrical devices such devices must be disposed of at a designated collection facility At the end of its service life please take your device to one of these public collection facilities for proper disposal age HDTV 1000 FM 2 GENERAL INFORMATION 2 1 PACKING CONTENTS 1 Cassette HDTV 1000 FM 2 HF cables 1 Brief assembly instructions 2 2 MEANING OF THE SYMBOLS USED IX Important note gt General note e Performing works 2 3 TECHNIC
20. ncy offset shown in the display e g 1 3 to less than 1 0 MHz by varying the input frequency using the DD buttons gt The CN 13 display indicates the signal to noise ratio of the signal received gt If stations are selected the quality of the received transport stream level and C N is indicated by a status LED 6 Status LED Tuner A 9 Status LED Tuner B n O Green Signal quality is good Yellow Signal quality is insufficient Red No signal e Press the lie button gt Using a CA Modul submenu CA settings CA MENU is acti vated gt Not using a CA Modul you will be returned to the Input parameter INPUT main menu page 16 18 HDTV 1000 FM OPERATION WITH A C MODULE In order to descramble scrambled channels a corresponding CA module is needed PID MONITORING C MODULE In this menu you can switch off the PID monitoring and configuring the CA module dependent on the CA module Bx 4A CA MENU PID Check on gt PID monitoring By default the PID monitoring is switched on If particular PIDs are not descrambled the Cl module is reset Additionally dropouts may occur if several stations are descrambled To prevent this the PID monitoring can be switched off Bx 4A CA MENU PID Check on gt e Use the E I buttons to switch off or on the PID monitoring Configuring the CA module e Use the D button to
21. on When working with the CA module please read the corresponding operat ing manual from the respective provider Insert the smart card into the CA module so that the chip 3 on the smart card 1 faces the thicker side top of the CA module 2 Insert the CA module into the slot 4 with the top side of the CA module facing the RS 232 socket of the cassette Push the CA module without canting into the guide rails of the CA slot 4 and contact it to the common interface eis HDTV 1000 FM 4 THE CONTROL PANEL AT A GLANCE 4 1 MENU ITEMS Programme the cassette using the buttons on the control unit of the head end station The two line display of the control unit then shows the menus The parameters and functions to be set are underlined Use the INIS key to select the following main menu items Input parameters BE Remote V44 Deleting services programme locations please wait Output parameters Output level A ex Factory reset MODE BOX SELECT MENU SELECT LEVEL RF OUTPUT MODE BUTTON MODE OUTPUT ES MODULATOR OUTPUT MENU RESET CHANNELS MODE BUTTON MODE AUDIO E MAIN SUB STEREO RS 232 VIDEO AUDIO 4 2 CONTROL PANEL The key pad on the head end station is used to scroll through the menus KEE scrolls forward through the menus DD select parameters in the menus we DD set values initiate actions selects
22. ormity Konformitatserklarung Declaration of Conformity D claration de Conformit LE 001 11 Der Hersteller Importeur GSS GRUNDIG SAT Systems GmbH The manufacturer importer Le producteur importateur Anschrift Address Adresse Beuthener Stra e 43 D 90471 N rnberg Germany erkl rt hiermit eigenverantwortlich da das Produkt declare under their sole responsibility that the product d clare que le produit Bezeichnung Name Description Head End Modulator FM Type Model Type GSS HDTV 1000 FM Bestell Nr Order No NO de r f GAS 3900 folgenden Normen entspricht is in accordance with the following specifications correspond aux normes suivantes EN 50083 2 2006 EN 60065 2002 EN 60065 AT 2006 EN 60065 A11 2008 Das Produkt erf llt somit die Forderungen folgender EG Richtlinien Therefore the product fulfils the demands of the following EC Directives Le produit satisfait ainsi aux conditions des directives suivantes de la CE 2006 95 EG Richtlinie betreffend elektrische Betriebsmittel zur Verwendung innerhalb bestimmter Spannungsgrenzen Directive relating to electrical equipment designed for use within certain voltage limits Directive relatives au mat riel lectrique destin a tre employ dans certaines limites de tension 2004 108 EG Richtlinie ber die elektromagnetische Vertr glichkeit Directive relating to electromagnetic compatibility Directive relatives la comp
23. t the DVB mode manually to shorten the time for searching stations Bx 4A B SYMBOL 27500 DVB S Setting the input symbol rate e Using the button the symbol rates 27500 or 22000 can be selected directly To set other symbol rates use the DD buttons to position the cursor under the digit of the symbol rate displayed to be set Press EJ to enter the respective digit of the symbol rate needed Repeat the procedure by the quantity of the digits to be set Setting the DVB mode e Use the D button to place the cursor under DVB S and set the required DVB S2 mode with the DD buttons e Press the NI button gt The Setting the input frequency FREQ menu is activated 17 HDTV 1000 FM SETTING THE INPUT FREQUENCY If three dots appear in the second line of the display the cassette is in the station search mode Please wait until the process has finished Once the HF receiver has synchronised to the input signal any offset to the target frequency is displayed in MHz e g 0 3 If a question mark appears in the second line of the display there is no input signal present Check the configuration of the antenna system and head end station as well as the preceding settings of the cassette Bx 4A B FREQ 12265 0 3 CN13 e Use the DD buttons to position the cursor under the digit of the frequency displayed to be set e Press DD to set the input frequency e Set the freque
24. tion too big net Frequency deviation much too big signal is clipping e Press the lie button gt The Kind of transmission AUDIO submenu is activated KIND OF TRANSMISSION In this submenu the kind of transmission can be set stereo mono automatic FM 01 AUDIO AUTO e Use the DD buttons to select the kind of transmission wished e Press the lie button gt The RDS RDS NAME submenu is activated RDS In this submenu you can enter the RDS Programme Service Name PS FM 01 RDS NAME Bayern 1 gt auto e Use the DD buttons to position the cursor under the digit of the name to be set e Press DD to set the respective digit of the name gt Via the auto function you can adopt the RDS Programme Service Name automatically from the channel name of the transponder 26 HDTV 1000 FM auto function e Press the D button gt The RDS Programme Service Name will be adopted automatically from the channel name of the transponder e Press the lie button gt You will be returned to the Programme location FM 01 main menu gt If necessary adjust another programme locations DIEN D e Press the MONJ button gt The Output level LEVEL main menu is activated OUTPUT LEVEL In this menu the output level can be adjusted O 10 dB Bx 4 LEVEL 0 dB e With the DD buttons adjust the output level wished e Press the lie button
Download Pdf Manuals
Related Search