MV-410RGB
Contents
1. MY 410RGB Layout Editor Ver 1 00 File M 410RGB Window Display Position X Y Output Resolution 1280 x 1024 x 160 v 136 w 592 sE Change to CH2 Change to CH3 Change to CH4 Title Delete Title Display Position x Y x 160 y 136 sl Displaying the video signal of the same channel to multiple windows is not possible If the channel that is already existed in the layout editing area is chosen the window channel numbers will be exchanged 32 Layout Editor 4 3 6 Changing Layer Order of Windows To change the layer order of overlapped windows follow the instruction below First select a window you wish to change the layer order To bring the window to the front click Front To send the window to the back click Back The layer order can also be changed by selecting a window and choosing To Front or To Back from the right click menu 4 3 7 Changing Display Position of Title To change the display position of a title select the window of the title that you wish to move and choose Title gt Set Position from the right click menu The title moves along with the cursor as you drag the mouse Move the cursor to the desired position and click the left mouse button The display position of a title can also be adjusted by selecting a title and changing the numeric values in X and Y at the bottom of the2. 2 Duo 1 3 GHz or faster processor processor 2 GHz or faster 2 GHz or faster 512 MB or more Display Resolution of 1024 x 768pixels or better nal Must be capable of full color 24 bit display Network port Ethernet at least one port TT ees Network cable 100BASE TX Category 5 or better EEN 1000BASE T Category 6 or enhanced category 5 Software Microsoft NET Framework 4 0 Supplied on the CD ROM Windows Installer 4 5 Supplied on the CD ROM 1 3 Operation Flow 1 Installing MV 410RGB Layout Editor 2 Connecting MV 410RGB Layout Editor installed PC to MV 410RGB 3 Starting MV 410RGB and MV 410RGB Layout Editor 4 Creating a split screen layout 5 Displaying a split screen layout 1 Layout Editor 1 4 Installing MV 410RGB Layout Editor 1 Load the supplied Installation CD ROM into the PC and open the CD ROM drive Run the file setup exe to start the setup wizard Double click F a emm Setup exe Setup 2 If NET Framework 4 0 is not installed on your PC the screen shown below is displayed Click Accept If NET Framework 4 0 is already installed on your PC this screen is not displayed 3 If Windows Installer 4 5 is not installed on your PC the screen shown below is displayed Click Accept If Windows Installer 4 5 is already installed on your PC this screen is not displayed BS MV 410RGB Layout Editor Setup E MV 410RGB Layout Editor Setup For the following
3. Internet Protocol TCP IP Properties window Then make the settings in the same way as above When the settings are completed click OK and then close all setting windows 7 Layout Editor 2 Starting Exiting MV 410RGB Layout Editor 2 1 Starting MV 410RGB Layout Editor Starting in Windows 8 1 Open to or change to the Start menu screen 2 Right click on an empty part of your desktop select All Apps 3 Click on the MV 410RGB Layout Editor icon to start the program To launch multiple instances of MV 410RGB Layout Editor right click on the MV 410RGB Layout Editor icon and select Open New Window Starting in Windows 7 To start MV 410RGB Layout Editor go to Start gt Programs gt FOR A and select MV 410RGB Layout Editor 2 2 Exiting MV 410RGB Layout Editor To exit MV 410RGB Layout Editor click the x button at the top right corner of the screen NOTE All unsaved changes will be lost when the application is closed Save the current layout to M V 410RGB or to your computer before closing the application 8 Layout Editor 3 Main Screen and Dialog Boxes 3 1 Main Screen After the application is started the screen shown below is displayed File Buttons Layout Upload Buttons MV 410RGB ID boxes MV 410RG3 Layout Editor Ver 1 00 SE File M 41 0RGB IP Address 192 168 0 i Save Layout No Display Save Send D GE o o Setti ng B utto n S Window Display Position X Y i Ou
4. Bi oy 156 RW v 14 Layout Editor 3 2 System Setting Clicking the System Setting button in the main screen displays the System Setting dialog box as shown below Setting menus 3 2 1 System Clicking the System tab displays the screen as shown below MV 410RGB System setting Year Month Day Hour Minute Second Cancel Clock Type ANALOG 1 wi creen Display mode MODES k 15 Layout Editor Description Date Time Click Change and then enter the date and time set for MV 410RGB Clicking Set applies the settings to MV 410RGB Clock Type Selects the type of clock display Followings are the images to give you an idea of each type of clocks lt Analog 1 gt lt Analog 2 gt lt Digital 1 gt lt Digital 2 gt DT Dark frame Light frame SY 10 2 Display Selects the screen display mode Mode MODE1 In Full screen display Displays the title and audio level meters without overlapping on the video image The aspect ratio of the input signal is retained In Split screen display Auto detects the aspect ratio of the input video signals and maximizes the images to best fit the each window while retaining the aspect ratio MODE2 In Full screen display Overlaps the title and audio level meters on the video image The aspect ratio of the input signal is retained In Split screen display Auto detects the aspect ratio of the input video signals and maximizes the images to best fit the e
5. componenta For the following components Microsoft NET Framework 4 G86 and x64 Windows Installer 4 5 Please read the following license agreement Press the page down key to see Please read the following license agreement Press the page down key to the rest of the agreement see the rest of the agreement MICROSOFT SOFTWARE LICENSE TERMS MICROSOFT WINDOWS INSTALLER VERSION 4 5 MICROSOFT SOFTWARE l These license terme are an agreement between SUPPLEMENTAL LICENSE TERMS Microsoft Corporation or based on where you ve one of its affiliates and you Please MICROSOFT NET FRAMEWORK 4 FOR MICROSOFT A E oles one above which includes the media on which pou WINDOWS OPERATING SYSTEM K received it if any The terms also apply to View EULA for printing View EULA for printing Do you accept the terms of the pending License Agreement Do you accept the terms of the pending License Agreement H you choose Dont Accept install will close To install you must accept this IF you choose Don t Accept install will clase To install you must accept agreement this agreement Accept i Dont ccent 4 If NET Framework 4 0 is not installed the installation starts E MV 410RGE Layout Editor Setup Cancel 2 Layout Editor 5 When installation of NET Framework 4 0 is complete the screen shown below is displayed requiring a reboot Click Yes to reboot your P
6. edit window MV 410RGB Layout Editor Ver 1 00 MY 410RGB File Window Display Position x Y Output Resolution 1280 x 1024 x 160 E yi 136 Siw 592 R To Front To Back Change to CH2 Change to CH3 Change to CH4 Set position Set to Default Title Display Position X Y x 160 i vie To reset the display position of the title to the default value choose Title gt Set to Default from the right click menu 33 Layout Editor 4 4 Saving Layout to MV 410RGB Once the connection between MV 410RGB and Layout Editor is established the changes of the layout are applied real time to MV 410RGB However since the changes are not backed up to the memory unsaved changes will be lost when MV 410RGB is powered off To save changes to MV 410RGB click the Save button in MV 410RGB in the main screen M41 OR GB Layout Mo 4 5 Saving Layout as File on Computer To save the created layout as a file on the computer click the Save button in File and give a desired name The saved file can be loaded by clicking the Open button in File File 4 6 Closing MV 410RGB Layout Editor To close the application Click X at the top right corner of the screen 5 Displaying Layout on MV 410RGB Output 5 1 MV 410RGB Pressing the SPLIT button on the front panel of MV 410RGB and pressing either of 1 2 B
7. or button displays a pattern of four patterns preset in MV 410RGB Layout Editor 5 2 MV 410RGB Layout Editor Choose a layout number from the Layout Number drop down list and press the Display button M41 OR GB Layout Mo 34 Layout Editor
8. the Add or Remove Programs window select MV 410RGB Layout Editor and click Remove to start the uninstallation Ifthe User Account Control dialog box appears click Yes to continue the uninstallation If your OS is Windows XP Go to Start gt Control Panel Select Add or Remove Programs to display the window In the Add or Remove Programs window select MV 410RGB Layout Editor and click Remove to start the uninstallation N 5 Layout Editor 1 6 Connections To use MV 410RGB Layout Editor connect MV 410RGB and PC over a LAN interface Be aware that the cables and equipment used vary depending on the connection method Use a crossover LAN cable to connect the computer directly to the MV 410RGB Use a straight through LAN cable for the connection using a router or a hub The communication standards for serial control over a LAN interface is as follows IP address Subnet mask length Gateway MAC address TCP IP Protocol Setting range 0 0 0 0 to 255 255 255 255 However there also are limitations on IP addresses set by the PC as shown below Set the IP address in this range ne ia 19 octet 2 octet 3 octet 4 octet IS octet 1 to 223 except 127 29 octet Oto 255 3 octet Oto 255 4th octet 1 to 254 This is set in the menu screen on the main unit The default setting is 192 168 0 1 Setting range 0 to 31 This is set in the menu screen on the main unit The defau
9. the window size See section 4 3 Editing Layouts for details MY 410RGB Layout Editor Ver 1 04 M 410RGB IP Address 192 168 0 1 AN ze D Soot asswor Window Display Position x Y Setting menus Output Resolution 1280 x 1024 x y w 9 SS 9 ES ee ee eee Title Display Position CX Y x e 25 Layout Editor 4 2 2 Loading Existing Layout To edit a layout in MV 410RGB first select a layout number from the Layout Number drop down list in MV 410RGB in the main screen M 41 ORG The layouts of the layout numbers 1 4 correspond to the layouts of the VIDEO SELECT buttons on the front panel of MV 410RGB Selecting a layout loads and displays the layout in the layout editing area as shown below Edit the layout See section 4 3 Editing Layouts for details Clicking the Display button displays the layout selected in the Layout Number drop down list on MV 410RGB output screen M 410RGB Layout Editor Ver 1 04 File Mi 410RGB IP Address 1 92 168 0 1 Window Display Position x Y Setting menus Output Resolution 1280 x 1024 x 160 136 2 wl 320 H 240 BS EES 9 WE ee ee EE re Title Display Position X Y x 160 S vii lf the editing layout and the layout output from MV 410RGB matches users can easily check the layout since the changes in the layout editing area are applied to MV 410RGB in r
10. 1 00 a NINES IP Address 192 168 0 1 Window Display Position X Y Setting menus Output Resolution 1280 x 1024 x 800 Wein 320 Title Display Position X Y x 80 gel v 13 sl 28 Layout Editor 4 3 2 Deleting Windows To delete a window select a window and click Delete To delete all windows in the editing are click Delete All Ce Ze ey A window can also be deleted by selecting a window and choosing Delete from the right click menu MV 410RGB Layout Editor Ver 1 00 Fie M ATORGE IP Address 192 168 0 1 Window Display Position X Y Setting menus Output Resolution 1280 x 1024 x 800 i v 1395 lw el ui 240 CH To Front To Back Change to CH1 Change to CH3 Change to CH4 Title Delete Title Display Position x Y x 800 Wl y 136 29 Layout Editor 4 3 3 Moving Window To move a window drag the window to the desired position and release the mouse button MV 410RGB Layout Editor Ver 1 00 Mie My Ate P Address 192 168 0 1 Window Display Position X Y Setting menus Output Resolution 1280 x 1024 x 160 136 w 320 gt H Title Display Position X Y x 1
11. 60 v 13 E MY 4I0ORGB Layout Editor Ver 1 00 File MV 410RGB IP Address 192 168 0 1 Window Display Position X Y Setting menus RETEA x 786 y 618 ziel 320 H 240 Tase Title Display Position X Y x 786 i 618 S A window can also be moved by changing the numeric values in X and Y at the top of the edit window or using the arrow keys on the keyboard Select the window first Only one window can be moved at a time When a window is moved its title also move along with the window The title located outside the window is moved inside if it reaches to the edge of the edit screen 30 Layout Editor 4 3 4 Setting Window Size To change the window size drag the edge of the window until the desired window size is obtained and release the mouse button The window size can also be adjusted by selecting a window and changing the numeric values in W and H MV 410RGB Layout Editor Ver 1 00 Fie MY 41ORGB IP Address 192 168 0 1 Window Display Position X Y Setting menus Output Resolution 1280 x 1024 x 160 S y 138 w system Title Display Position X Y x 160 9 v 13 MY 410RGB Layout Editor Ver 1 00 File M v 410RGB IP Address 1
12. 92 168 0 1 Window Display Position X Y Setting menus Output Resolution 1280 x 1024 x 160 S y 13 Zlwl em zl ng gt Title Display Position X Y x 1650 9 ele lf Aspect Ratio is set to other than Free the size can be adjusted while retaining the aspect ratio mM The window size can also be changed by clicking the Fit Screen Double Width Double Height Half Width and Half Height buttons The actual video display is within the area left after the removal of areas for tally and border displays from the set window size 31 Layout Editor m The minimum window size is 120 W x 80 H However due to the minimum video display area requirement of 96 W x 56 H the border width will be automatically reduced to obtain the display area m How a video signal is displayed in each window in Split Screen Display Mode differs depending on the Display Mode in System Setting If MODE1 or MODE2 is selected Auto detects the aspect ratio of the input video signal and maximizes the image to best fit the window while retaining the aspect ratio If MODE3 is selected Maximizes the image to best fit the window The aspect ratio of the input signal is not retained 4 3 5 Changing Channel of Window To change the display channel of a window select the window and right click to display the menu From the right click menu choose a channel
13. C F MV 410RGB Layout Editor Setup d 4 Setup must reboot before proceeding 12 Choose res to reboot now or Mo to manually reboot later 6 After the setup wizard is started click Next j MV 410RGB Layout Editor Welcome to the MV 410RGB Layout Editor Setup Wizard The installer will guide vou through the steps required to install MY 470RGEB Layout Editor on your computer WARNING This computer program is protected by copyright law and international treaties Unauthorized duplication or distribution of this program or any portion of it may result in severe civil or criminal penalties and will be prosecuted to the maximum extent possible under the law 7 Select the installation directory It is not necessary to change the folder Select whether to install MV 410RGB Layout Editor for current user only or for all users The default is set to the current user When the settings are completed click NEXT gt j MV 410RGB Layout Editor Select Installation Folder The installer will install MY 4 7 0RGB Layout Editor to the following folder To install in this folder click Next To install to a different folder enter it below or click Browse Folder C Program Files FOR A Mw 0RGB Layout Editor Browse Disk Cost Install MV ATOUROGD Layout Editor for yourself or for anyone who uses this computer Everyone f Just me Cancel Back 3 Layout Editor 8 Click NEXT gt to
14. E 28 AS cP ICING VV ING OW 28 4 3 2 Deleting lee E 29 ioe ron ere le Tele 30 4 3 4 SEMING VV INGOW S Z E 31 4 3 5 Ghanging OhannelOl ele EE 32 4 3 6 Changing Layer Order Of WINGOWS cccccseecceceeeeceeeeeeeeeeceeeeeeeseeeeesseaeeeessaeeeeeeas 33 4 3 7 Changing Display Position Of Te 33 4 4 Saving Layout to Ny xp se a EE 34 4 5 Saving Layout aS File ON Computer 34 4 6 Closing MV 410RGB Layout Edtor serere aE EA E OEE EEEO ENESE KENEN 34 5 Displaying Layout on MV 410RGB Output 34 Be DOE a EE 34 5 2 MV 410RGB Layout Edtor ENEE 34 Trademark Microsoft Windows XP operating system is a trademark of Microsoft Corporation NET Framework is a trademark of Microsoft Corporation Pentium is a trademark of Intel Corporation 1 Setup 1 1 Overview MV 410RGB Layout Editor is a software to customize the layout of the MV 410RGB split screen from a computer Up to 4 preset patterns SPLIT 1 to 4 can be stored Those stored layouts are easily recalled by using the button on the front panel of MV 410RGB MV 410RGB anda computer can be connected via LAN 1 2 System Requirements To install MV 410RGB Layout Editor your computer must meet the following requirements O Windows XP operating Windows 7 operating Windows 8 operating system SP2 or later system system 32 64 bit Professional 32 bit Professional 32 64 bit C S PU Pentium A processor Intel Core 2 Duo Intel Core
15. FCI a WAT a N VIDEO EGH NOLOGY OPERATION MANUAL MV 410RGB Layout Editor Version 2 1 higher FOR A COMPANY LIMITED Table of Contents Me UN EE 1 En Wee 1 EE SEENEN 1 to e tee FOW EN 1 1 4 Installing MV 410RGB Layout Editor 2 1 5 Removing MV 410RGB Layout Editor cee cccceeeeeceecceesseeeccceeeseceesceeaseceeesseaseeeeesseaseeeess 5 EE MEHN 6 1 7 PC Network Settings cccccssssccccccesseeeccceeessceeeceeeseeeeesseeusecesessaueceesseeaaeeeeesseageeeessseaneeeess 6 2 Starting Exiting MV 410RGB Layout Editor 8 271 Starting MV 41IOAGB Layout Editor iesise EE EE EE E 8 2 2 Exiting MV 410RGB Layout Editor cee ccccceeccceeeceeeeeeeeeeeeeeeeeeeeaeeseeeesseeeeeeeeessaaseeeessaeaaes 8 3 Main Screen and Dialog BOXES EE 9 SEN E E e Re RE 9 321s MN ATORGB ID BOXES sixes ee aa ers see eee 9 e ME 9 OP E Layour Upload te de E 10 SE SEUNA BUWONS EE 11 3 1 5 Layout Editing Area and Editing Tools ENNER 11 EE E ale ean am nm ete eT A NT AEAN ENEA A AA 15 SE KE EE 15 E Deeg 17 SE NICO d Ee 18 Be RUE en NEE 19 Fe Opa MHEG OD GE 20 Ee Tele WEE 21 SE E ele EE 21 E EE 22 SB COD ett attain cna stan tte cage eae toenail ei ethene tic enedi ee nee nee nanan 23 4 Using MV 410RGB Layout Edtor 24 A gt te EStaDliShING Connec UON EE 24 4 2 Grealing and Loading Lay OWL EE 25 4 2 1 Creating New Lavout ENNEN 25 4 22 Loading EXISUNG MAN ON EE 26 4 2 3 enne Re RE TEE 27 AS EANN LAV OUNS
16. ach window while retaining the aspect ratio MODE3 In Full screen display Maximizes the image to best fit the window The aspect ratio of the input signal is not retained The title and audio level meters are overlapped on the video image In Split screen display Maximizes the image to best fit the window The aspect ratio of the input signal is not retained Frequency Selects frequency for the MV 410RGB output signal from among 60Hz 59 94Hz and 50Hz Those are approximate frequencies See the MV 410RGB Operation Manual section 10 1 Specifications for details Apply Applies the changes made in this screen to MV 410RGB To save the settings in MV 410RGB click Save on the main screen otherwise the changes will be lost when the MV 410RGB is powered off Closes System Setting dialog and returns to main screen 16 Layout Editor 3 2 2 Tally Clicking the Tally tab displays the screen as shown below MY 410RGB System setting Tally Detection Simultaneous tallies indication Tally Detection Enables and disables the tally detection Selecting the checkbox enables the tally detection Simultaneous tallies Sets the color of tally display for when the red tally and the indication green tally are input at the same time RED Displays a red frame if the red tally and the green tally are input at the same time UMBER Displays an orange frame if the red tally and the green tally are input at the sa
17. e on the main screen otherwise the changes will be lost when the MV 410RGB is powered off Closes Layout Setting dialog and returns to main screen IMPORTANT The minimum size of windows is 120 W x 80 H Displaying video images requires the area larger than 96 W x 56 H Therefore if the border width is set too wide for the small window the border width is automatically narrowed 21 Layout Editor 3 3 2 Title Clicking the Title tab displays the screen as shown below MV 410RGB Layout setting CH C Title Display Title Text Size CH2 C Title Display Title Text size CH3 C Title Display Title Text Size CHA Title Display Title Text Size CLOCK C Title Display Title Text Size Title Display Shows and hides the title Selecting the checkbox shows the title Sets the title to be displayed Up to 16 characters can be used Text Size Selects the text size The available settings are SMALL MEDIUM and LARGE Color Selects the title color The available settings are WHITE YELLOW GREEN CYAN RED MAGENTA BLUE GRAY and BLACK Apply Applies the changes made in this screen to MV 410RGB To save the settings in MV 410RGB click Save on the main screen otherwise the changes will be lost when the MV 410RGB is powered off Closes Layout Setting dialog and returns to main screen 22 Layout Editor 3 3 3 Crop Clicking the Crop tab displays the screen as shown below On this page the size t
18. eal time The output resolution can only be selected when creating a new layout The resolution of the layout loaded from MV 410RGB or the layout stored in the computer cannot be changed 26 Layout Editor 4 2 3 Opening Saved Layout 1 To edit the layout saved on the computer click the Open button in File File 2 Selecting a layout file and clicking Open opens the layout Look in CQMVAIDRGR_SAMPLE ei 410RGB_SAMPLE QO Ki ES Ei Mu R ecent Documents E 1920 1 2006 mvl Files of type mul files ml y The output resolution can only be selected when creating a new layout The resolution of the layout loaded from MV 410RGB or the layout stored in the computer cannot be changed ER Layout Editor 4 3 Editing Layouts 4 3 1 Adding Windows Windows can be added using the buttons 1 2 3 4 and C Clicking the button of window that is not displayed in the layout editing area adds the window to the layout editing area Up to four video windows and one clock window can be added MV 410RGB Layout Editor Ver 1 00 Fie MY 410RGB IP Address 192 168 0 1 Layoutno 1 Display Save Sen mmm Window Display Position X Y Setting menus Output Resolution 1280 x 1024 x 160 y 13 Slw system IER Title Display Position CX Y x 160 136 1 MV 410RGB Layout Editor Ver
19. g area The center button positions a window at the center of the layout editing area 13 Front Bring to front Arranges the selected window to the front 14 Back Send to back Arranges the selected window to the back 15 Fit Screen Maximizes the window to best fit the selected window size If Aspect Ratio is set to other than Free the aspect ratio is retained 16 Width x 2 Sets the width of the selected window to double the width of the original window If Aspect Ratio is set to other than Free the aspect ratio is retained 13 Layout Editor 17 Height x 2 Doubles the height of the selected window to double the height of the original window If Aspect Ratio is set to other than Free the aspect ratio is retained 18 Width 1 2 Sets the width of the selected window to half the width of the original window If Aspect Ratio is set to other than Free the aspect ratio is retained 19 Height 1 2 Sets the height of the selected window to half the height of the original window If Aspect Ratio is set to other than Free the aspect ratio is retained 20 Deselect Deselects the selected window 21 Title Display Position X Y Displays the display position of the selected window title Also the title display position can be adjusted by changing the numeric value The X value represents the position of the left edge of title and the Y value represents the top edge of title Title Display Position X vi x 190
20. ide of images Setting range 0 to 960 in multiples of 4 1 2 pixels Crop Right Sets how much to crop from the right side of images Setting range 0 to 960 in multiples of 4 1 2 pixels Apply Applies the changes made in this screen to MV 410RGB To save the settings in MV 410RGB click Save on the main screen otherwise the changes will be lost when the MV 410RGB is powered off Closes System Setting dialog and returns to main screen IMPORTANT lf the specified crop size exceeds the screen size of the input format the image display will become improper Make sure that the total of crop sizes does not to exceed the screen size 20 Layout Editor 3 3 Layout Setting Clicking the Layout Setting button in the main screen displays the Layout Setting dialog box as shown below The parameters for each layout can be set separately with this dialog box Setting menus 3 3 1 Border Clicking the Border tab displays the screen as shown below MV 410RGB Layout setting EA Border Title Crop C Border Display Border width Border Color en Border Display Border width Top Border width Bottom Border width Let Border width Right sets the right border line width in the range from 0 to 50 Border Color Selects the border color The available settings are WHITE YELLOW CYAN MAGENTA BLUE GRAY and BLACK Apply Applies the changes made in this screen to MV 410RGB To save the settings in MV 410RGB click Sav
21. lt setting is 24 Setting range 0 0 0 0 to 255 255 255 255 This is set in the menu screen on the main unit The value 0 0 0 0 signifies that the gateway has not been set The default setting is 0 0 0 0 This is already set at factory shipping cannot be changed The setting can be confirmed in the menu screen on the main unit 1 7 PC Network Settings The PC network settings need to match that of the MV 410RGB The procedure for making the network settings at the PC vary depending on the OS so refer to the OS manual for details This setting example shows the case when connecting to the MV 410RGB with the default settings The MV 410RGB default settings are shown below IP address 192 168 0 1 Subnet mask length 0 0 0 0 6 Layout Editor Setting in Windows 8 1 Open Control Panel gt Network General and sharing Center You can get IP settings assigned automatically if your network supports 2 Click Ethernet adapter and select this capability Otherwise you need to ask your network administrator Pro pe rties for the appropriate IP settings 3 Double click on Internet Protocol DEE _ Obtain an IP address automatica Version 4 TCP IPv4 to bring up the Se R TCP IP settings window KEE 4 Set the network settings as shown in oe 192 168 0 200 the example below Make a note of the as settings before changing them in case Default gateway you need to return the IP address to its Origi
22. me time Applies the changes made in this screen to MV 410RGB To save the settings in MV 410RGB click Save on the main screen otherwise the changes will be lost when the MV 410RGB is powered off Closes System Setting dialog and returns to main screen 17 Layout Editor 3 2 3 Video Loss Clicking the Video Loss tab displays the screen as shown below MV 410RGB System setting System Tally Video Loss Detection CH1 cH2 cH3 CH4 Alarm display time Sec Video Loss Detection Enables and disables the video loss detection Selecting the checkbox enables the video loss detection Alarm Display Time When a video loss is detected an alarm is displayed within the window for the time length set in this box The setting range is 00 second to 100 seconds The value 00 second continues the alarm display until the video loss is recovered or output channel is switched to another channel Applies the changes made in this screen to MV 410RGB To save the settings in MV 410RGB click Save on the main screen otherwise the changes will be lost when the MV 410RGB is powered off Closes System Setting dialog and returns to main screen 18 Layout Editor 3 2 4 Full Screen Clicking the Full Screen tab displays the screen as shown below MV 410RGB System setting Ai System Tally Video Loss Full screen i Full Crop Full screen output resolution 4 Se 024 CH Title Display Title Tex
23. nal setti ngs later Obtain DNS server address automatically Use the following DNS server addresses Preferred DNS server Alternative DNS server Validate settings upon exit Advanced Cancel IP address for PC 192 168 0 yyy yyy is any number from 2 to 254 except for the number set for the MV 410RGB unit and the gateway number In this example the setting is yyy 200 Subnet mask Set to 255 255 255 0 Setting in Windows 7 1 Open Control Panel gt Network and Internet gt Network and Sharing Center 2 Click Local Area Connection and select Properties 3 Double click on Internet Protocol Version A TCP IPv4 to bring up the TCP IP settings Setting in Windows XP with the default Start menu mode Click Start on the taskbar select Settings gt Network Connections and then right click the Local Area Connection icon to open Properties window Double clicking Internet Protocol TCP IP under the General tab opens the Internet Protocol TCP IP Properties window Then make the settings in the same way as above When the settings are completed click OK and then close all setting windows Setting in Windows XP with the Start menu setting changed to Classic Click Start on the taskbar select Settings gt Network Connections and then right click the Local Area Connection icon to open Properties window Double clicking Internet Protocol TCP IP under the General tab opens the
24. o crop images of each channel displayed in split screen mode can be set MV 410RGB Layout setting Border Title Crop Top Sets how much to crop from the top edge of images Setting range 0 to 1200 in multiples of 4 Crop Bottom Sets how much to crop from the bottom edge of images Setting range 0 to 1200 in multiples of 4 Crop Left Sets how much to crop from the left side of images Setting range 0 to 960 in multiples of 4 1 2 pixels Crop Right Sets how much to crop from the right side of images Setting range 0 to 960 in multiples of 4 1 2 pixels Apply Applies the changes made in this screen to MV 410RGB To save the settings in MV 410RGB click Save on the main screen otherwise the changes will be lost when the MV 410RGB is powered off Closes System Setting dialog and returns to main screen IMPORTANT lf the specified crop size exceeds the screen size of the input format the image display will become improper Make sure that the total of crop sizes does not to exceed the screen size 23 Layout Editor 4 Using MV 410RGB Layout Editor 4 1 Establishing Connection To start MV 410RGB Layout Editor go to Start gt Programs gt FOR A and select MV 410RGB Layout Editor After the application is started the screen shown below is displayed MY 410RGB Layout Editor Ver 1 00 MY 410RGB Layout No Display Save Send Window Display Position X Y Output Res
25. olution 1280 x 1024 x Lo w H M PE eee ee EE re Title Display Position X Y x Y Enter the IP address ID and password of MV 410RGB that you wish to connect IP Address 192 168 0 1 ID ROOT Password mmm The default settings of MV 410RGB are as follows IP address 192 168 0 1 ID ROOT Password 00000 IP Address 192 168 0 1 ID ROOT Password ee Setting menus lf a communication error occurs as shown above make sure that the IP address ID and password are set correctly Communication error 24 Layout Editor 4 2 Creating and Loading Layout This section explains how to create a new layout or edit a layout loaded from MV 410RGB The created layout can also be saved on the computer and reloaded for editing The output resolution can only be selected for the newly created layouts and it cannot be changed for the layouts loaded from MV 410RGB or the layouts stored in the computer 4 2 1 Creating New Layout 1 To create a new layout select a layout number from 1 4 and click the New bution in File at the top of the main screen File s S j V i 2 The Output Resolution dialog box is displayed Set the output resolution and click OK Output Resolution M af 1280 x 1024 3 Edit the layout in the layout editing area that is currently opened For example add and move windows or change
26. opened from the computer cannot be changed 4 Window Display Position X Y Displays the display position of the selected window Also the window display position can be adjusted by changing the numeric values NOTE Window Display Position for both X and Y can be adjusted in units of 2 pixels 5 Window Size W H Displays the size of the selected window Also the window size can be adjusted by changing the numeric values If Aspect Ratio is set to other than Free changing either of W width or H height changes the other automatically Window Size for both Width and Height can only be adjusted in units of 8 pixels Due to this limitation the specified aspect ratio may not always be applied accurately 6 Undo Cancels the performed actions 7 Redo Cancels the undo commands 8 Aspect Ratio Changes the aspect ratio of the selected window The window size can be changed while retaining the specified aspect ratio Used for the window that displays an image of 16 9 such as 1360 x 768 Used for the window that displays an image of 4 3 such as 1024 x 768 Selectable for the clock window only The window size can be changed without retaining the aspect ratio The Aspect Ratio drop down list to the left of the 1 button is for the video windows The Aspect Ratio drop down list to the right of the C button is for the clock window 12 Layout Editor 9 Add Select Window Selects a window for changing the
27. settings Clicking either of 1 2 3 or 4 selects the window of the selected number Clicking C selects the clock window If the selected window is not displayed in the layout editing area the window is added to the layout editing area NOTE The number displayed in a window on the layout edit screen and the channel number of the input video signal to be displayed on the monitor are the same 10 Delete Window Clicking deletes the selected window from the layout edit screen Clicking All deletes all windows from the layout edit screen 11 Select Preset Pattern Clicking any one of the split screen icons at the left of the layout editing area selects a preset pattern of split screen lf multiple patterns of the same number split screen exist the displayed pattern can be changed to other pattern by the lever beneath the split screen icons Every click on the split screen icon also changes the pattern display 12 Add Move 1 16 size window Clicking any one of the add 1 16 size window icon at the right of the layout editing area adds a 1 16 size window at the place each icon depicts Every click add a window in a row shown in the icon The arrow button beneath the add 1 16 size window icon changes the direction of the window line opposite Five buttons under the icons instantly move a window right next to the other window in each direction If there is no window in the direction the window is moved to the edge of the layout editin
28. since the changes in the layout editing area are applied to MV 410RGB in real time However all unsaved changes will be lost when MV 410RGB is powered off Save the current layout to MV 410RGB before powering off MV 410RGB Layout Number is empty right after the application is started In this status RA layouts can be created without communicating with MV 410RGB off line The created layouts can be saved on the computer and loaded into MV 410RGB when connected 2 Display Displays the layout selected in the Layout Number drop down list on MV 410RGB output monitor 3 Save Saves the current layout to MV 410RGB NOTE All unsaved changes will be lost when MV 410RGB is powered off Save the current layout to MV 410RGB before powering off MV 410RGB 4 Send Sends the current layout to MV 410RGB Normally you do not need to click the Send button since the changes of the layout are sent real time to MV 410RGB If the layouts in the layout editing area and MV 410RGB do not match due to a communication error click the button 10 Layout Editor 3 1 4 Setting Buttons Setting menus 1 System The MV 410RGB system settings and full screen display settings can be made See section 3 2 System Setting for details NOTE The layout cannot be edited while the System Setting dialog box is displayed To edit the layout close the System Setting dialog box 2 Layout The layout settings can be made for each layou
29. start the installation cl MV 410RGB Layout Editor Seles Confirm Installation The installer is ready to install MY 470AGB Layout Editor on your computer Click Mest to start the ingtallation Cancel Back 9 When installation is completed normally the screen shown below is displayed Click Close to quit the setup wizard MV 410RGB Layout Editor Installation Complete MY H10RGE Layout Editor has been successfully installed Click Close to exit Please use Windows Update to check for any critical updates to the NET Framework 4 Layout Editor 1 5 Removing MV 410RGB Layout Editor To remove MV 410RGB Layout Editor follow the uninstallation procedure described in your operation system user s manual The Microsoft NET Framework 4 0 and Windows Installer 4 5 do not need to be removed If your OS is Windows 8 1 Open to or change to the Start menu screen 2 Using a mouse point to the upper right corner of the screen to display the Charms Bar Click on the Settings icon 3 In the Settings window select Control Panel 4 In the Control Panel window select Uninstall a program beneath Programs 5 Select MV 410RGB Layout Editor to start uninstallation Ifthe User Account Control dialog box appears click Yes to continue the uninstallation If your OS is Windows 7 and in Category View 1 Go to Start gt Control Panel Select Add or Remove Programs io display the window 2 In
30. t Size CH Title Display Title Text Size CH Title Display Title Text Size CH4 Title Display Title Text Size Full Screen Selects the output resolution for full screen display The available Output Resolution settings are as follows 1280 x 1024 1360 x 768 1600 x 1200 1920 x 1200 1440 x 900 1680 x 1050 1920 x 1080 1280 x 720 Title Display Shows and hides the title Selecting the checkbox shows the title Sets the title to be displayed Up to 16 characters can be used Text Size Selects the text size The available settings are SMALL MEDIUM and LARGE Selects the title color The available settings are WHITE YELLOW GREEN CYAN RED MAGENTA BLUE GRAY and BLACK Applies the changes made in this screen to MV 410RGB To save the settings in MV 410RGB click Save on the main screen otherwise the changes will be lost when the MV 410RGB is powered off Closes System Setting dialog and returns to main screen 19 Layout Editor 3 2 5 Full Crop Clicking the Full Crop tab displays the screen as shown below On this page the size to crop images displayed in full screen mode can be set MV 410RGB System setting System Tally Crop Top Sets how much to crop from the top edge of images Setting range 0 to 1200 in multiples of 4 Crop Bottom Sets how much to crop from the bottom edge of images Setting range 0 to 1200 in multiples of 4 Crop Left Sets how much to crop from the left s
31. t separately See section 3 3 Layout Setting for details The layout cannot be edited while the Layout Setting dialog box is displayed To edit the layout close the Layout Setting dialog box 3 1 5 Layout Editing Area and Editing Tools MV 410RGB Layout Editor Ver 1 00 File MYv 410RGB 192 168 0 4 Window Display Position X Y Setti e g Output Resolution 1280 x 1024 x 160 Ziel 136 w E A Title Display Position X Y a else B 1 Layout editing area base point The coordinate 0 0 base point of the layout editing area is the top left corner of the area The X coordinate value increases from left to right The right end is the highest The Y coordinate value increases from top to bottom The bottom end is the highest 2 Window base point The location of a window is determined by the X coordinate of the left edge of the window and the Y coordinate of the top edge of the window 11 Layout Editor NOTE The valid coordinate range for placing a window varies depending on the output resolution 3 Output Resolution Displays the output resolution of the selected layout Window Display Position CN vi Output Resolution 1260 x 1024 xX 190 e Y 156 E wy 480 v H 360 lt The output resolution can only be selected when creating a new layout The resolution of the layout loaded from MV 410RGB or the layout
32. tput Resolution 1280 x 1024 x ka wW l ee A Layout Editing Area x EE 9 ES ee eee Title Display Position CN Y x D 3 1 1 MV 410RGB ID Boxes IP Address ID Password 1 IP address Enter the IP address of MV 410RGB to be connected 2 ID Enter the ID specified in MV 410RGB 3 Password Enter the password specified in MV 410RGB 3 1 2 File Buttons 1 New Creates a new layout NOTE All unsaved changes will be lost when the layout is closed to start a new layout Save the current layout to MV 410RGB or to your computer before creating a new layout 9 Layout Editor 2 Open Opens a layout saved on the computer NOTE All unsaved changes will be lost when a layout saved on the computer is opened Save the current layout to MV 410RGB or to your computer before opening a layout 3 Save Save the currently open layout on the computer NOTE The MV 410RGB system settings as well as the layout settings are saved as a layout file 3 1 3 Layout Upload Buttons M 41 ORB 1 Layout Number Selects a layout number of the layout to be edited or saved Up to 4 patterns can be saved to MV 410RGB Once the layout number is selected the layout is loaded from M V 410RGB into the layout editing area Selecting the same number as the layout number of MV 410RGB allows users to easily check the layout
Download Pdf Manuals
Related Search
MV 410RGB