User Guide
Contents
1. beam from striking the audience Operating Modes e Sound Active Mode The fixture will react to sound chasing through the built in programs e Auto Play This function run automatically run through all of units patterns Sound Active Mode This mode allows the unit to run to the beat of the music 1 Press the Auto Sound button When the red indicator light located on the front of the unit turns off but flashes to the beat of the music the unit is in sound active mode NO of WD ADJ Products LLC www adj com Micro Sky Instruction Manual Page 8 Micro Sky Operation Auto Play Mode This is Auto Play mode 1 Press the Auto Sound button When the red indicator light light flashes rapidly the unit is in fast auto mode When the indicator light flashes slowly the unit is in slow auto mode 2 Use the speed knob to control the speed of the mode Remote Control Use the included remote to control various func tions Please see below for button control Note This remote control code has been set for this laser so that the laser can be controlled out of the box If this code happens to get erased the remote will not work with the unit Please see below to reset the code and link the laser to the remote again A Button Use this button to switch between Auto Play and Sound Active When the red indicator light light flashes rapidly the unit is in fast auto mode When the indicator light flashes slowly the unit is in slo2. this product out doors voids all warranties During long periods of non use disconnect the unit s main power Always mount this unit in safe and stable matter Power cords should be routed so they are not likely to be walked on pinched by items placed upon or against them Cleaning The fixture should be cleaned only as recommended by the manufacturer See page 11 for cleaning details Heat The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat The fixture should be serviced by qualified service personnel when The power supply cord or the plug has been damaged Objects have fallen or liquid has been spilled into the unit The unit has been exposed to rain or water The unit does not appear to operate normally or exhibits a marked change in performance Dow ADJ Products LLC www adj com Micro Sky Instruction Manual Page 4 Micro Sky Laser Warnings and Safety NON INTERLOCKED HOUSING WARNING The Micro Sky contains high power laser devices internally Do not open the laser housing due to the potential exposure to unsafe levels of laser radiation The laser power levels if the unit is opened can cause instant blindness skin burns and fires STOP AND READ ALL LASER SAFETY DATA OPERATION INSTRUCTIONS AND LASER SAFETY The light source emitted from this product can potentially cause eye injury if not set up and used prope
3. 1 13 User Instructions Micro Sky General Introduction Unpacking Thank you for purchasing the Micro Sky by ADJ Prod ucts LLC Every Micro Sky has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your fixture for any damage and be sure all equipment necessary to operate the unit has arrived intact In the event damage has been found or parts are miss ing please contact our toll free customer support number for further instructions Please do not return this unit to your dealer without con tacting customer support first Introduction The Micro Sky is a portable green laser that produces a brilliant liquid sky effect that can be projected on a ceiling or wall The Micro Sky is a stand alone fixture with 2 operating modes sound active mode and auto mode The Micro Sky s compact light weight case design make it ideal for mobile entertainers bands night clubs and bar For best results use fog or special effects smoke to enhance the beams projections Customer Support ADJ Products LLC provides a toll free cus tomer support line to provide set up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www adj com for any comments or suggestions For service related issue please
4. 22 S Eastern Ave Los Angeles CA 90040 USA Tel 323 582 2650 Fax 323 725 6100 Web www adj com E mail info adj com A D J Supply Europe B V Junostraat 2 te 6468 EW Kerkrade Netherlands service adj eu www adj com Tel 31 45 546 85 00 Fax 31 45 546 85 99 Follow Us On facebook com americandj twitter com americandj youtube com adjlighting
5. arries a 90 day limited warranty Please fill out the enclosed warranty card to validate your purchase All returned ser vice items whether under warranty or not must be freight pre paid and accompany a return authorization R A number If the unit is under warranty you must provide a copy of your proof of purchase invoice Please contact ADJ Products LLC customer support for a R A number ADJ Products LLC www adj com Micro Sky Instruction Manual Page 3 Micro Sky Safety Precautions VISIBLE LASER RADIATION AVOID DIRECT EYE EXPOSURE LASER DIODE WAVELENGTH 635 650 nm Max Output lt 4 9mW Class Illa Laser Product e To reduce the risk of electrical shock or fire do not expose this unit rain or moisture Do not spill water or other liquids into or on to your unit Do not attempt to remove or break off the ground prong from the electrical cord This prong is used to reduce the risk of electrical shock and fire in case of an internal short Do not attempt to oper ate this unit if the power cord has been frayed or broken Disconnect from main power before making any type of connection Do not remove the cover under any conditions There are no user serviceable parts inside Always be sure to mount this unit in an area that will allow proper ventilation Allow about 6 15cm between this device and a wall Do not attempt to operate this unit if it becomes damaged This unit is intended for indoor use only use of
6. contact ADJ Products LLC Service Hours are Monday through Friday 8 00 a m to 4 30 p m Pacific Standard Time Voice 800 322 6337 Fax 323 582 2941 E mail support adj com Warning To prevent or reduce the risk of electrical shock or fire do not expose this unit to rain or moisture Caution There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures war ranty In the unlikely event your unit may require service please contact ADJ Products LLC customer support PLEASE recycle the shipping carton whenever possible ADJ Products LLC www adj com Micro Sky Instruction Manual Page 2 Micro Sky General Instructions Please carefully read and understand the instructions in this manual thoroughly before attempting to operate this unit These instructions contain important safety information regarding the use and mainte nance of this unit Please keep this manual with the unit for future reference CAUTION IMPORTANT When installing this projector make sure that it is mounted in a manner that prevents the audience from looking directly into the beam and the beam from striking the audience Micro Sky Features 30mW 532nm Green Laser 25 Laser Patterns amp 15 Built In Programs 2 Operating Modes Sound Active Mode amp Auto Mode RF Wireless Remote Control Included e Dual Hanging Bracket Micro Sky Warranty Registration The Micro Sky c
7. igh laser power levels inside of the protective housing can start fires burn skin and will cause instant eye injury Never leave this device running unattended The operation of a class 3R laser show is only allowed if the show is controlled by a skilled and well trained operator familiar with the data included in this manual The legal requirements for using laser entertainment products vary from country to country The user is responsible for the legal require ments at the location country of use Always use proper lighting safety cables when hanging lights and effects overhead ADJ Products LLC www adj com Micro Sky Instruction Manual Page 6 Micro Sky Laser Warning Labels ADJ Products LLC www adj com Micro Sky Instruction Manual Page 7 Micro Sky Control Panel Main input Connect to main power Power Switch Turns On Off the power Fan Cool the unit Speed Used to adjust the speed under Auto mode slow to fast Remote code To activate your remote or erase remote code Microphone Receives the sound to control the unit Auto Sound switch button Press to switch between Auto play or Sound active mode Auto mode The unit will run at a slow or fast speed Micro Sky Operation CAUTION IMPORTANT When installing this projector make sure that it is mounted in a manner that prevents the audience from looking directly into the beam and the
8. mber RA before sending back the product please contact ADJ Products LLC Service Department at 800 322 6337 Send the pro duct only to the ADJ Products LLC factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty ADJ Products LLC will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in it s original package No accessories should be shipped with the product If any accessories are shipped with the product ADJ Products LLC shall have no liability whatsoever for loss of or damage to any such accessories nor for the safe return thereof C This warranty is void if the serial number has been altered or removed if the product is modified in any manner which ADJ Products LLC concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the ADJ Products LLC factory unless prior written authorization was issued to purchaser by ADJ Products LLC if the product is damaged because not properly maintained as set forth in the instruction manual D This is not a service contract and this warranty does not include maintnance cleaning or periodic check up During the period specified above ADJ Products LLC will replace defective parts at its expense with new or refurbished parts and will absorb all e
9. n heavy use we recom mend cleaning on a monthly basis Periodic cleaning will ensure lon gevity and crisp beam output Micro Sky Trouble Shooting Trouble Shooting Listed below are a few common problems that you may encounter with solutions No laser output from the unit 1 Be sure you have connected your unit into a standard wall outlet 2 In cold temperature situations it might take the laser a little longer to produce output It can take up to 3 5 minutes for the laser to produce a beam This is due to the laser diode which is very sen sitive Unit does not respond to sound 1 Low frequencies bass should cause the unit to react to sound Tapping on the microphone quiet or high pitched sounds may not activate the unit ADJ Products LLC www adj com Micro Sky Instruction Manual Page 10 Micro Sky Warranty MANUFACTURER S LIMITED WARRANTY A ADJ Products LLC hereby warrants to the original purchaser ADJ Products LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase see specific warranty period on reverse This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service you must obtain a Return Authorization nu
10. pplicable to ADJ Products LLC Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published MANUFACTURER S LIMITED WARRANTY PERIODS e Lighting Products 1 year 365 days Limited Warranty Such as Special Effect Lighting Intelligent Lighting UV lighting Strobes Fog Machines Bubble Machines Mirror Balls Par Cans Trussing Lighting Stands etc excluding LED Laser Products and lamps e Laser Products 90 Day Limited Warranty e L ED Products 3 year 1095 days Limited Warranty excluding motors PCB boards and power supplies which have a 1 year 365 day Limited Warranty and batteries which have a 180 day limited warranty Only the L E D s carry a 3 year warranty ADJ Products LLC www adj com Micro Sky Instruction Manual Page 11 Micro Sky Specifications Model Micro Sky Voltage 12V DC 100 240V 50 60Hz Power Consumption 11W Lasers 30mW Green Diode Dimensions 7 25 L x 7 W x 2 5 H 182mm x 174mm x 62mm Green 2 Ibs 1 1 kgs None Yes Any Safe Secure Position 90 Days Working Position Warranty Auto Sensing Voltage This fixture contains a automatic volt age switch which will auto sense the voltage when it is plugged into the power source Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice ADJ Products LLC 61
11. rly The light source emitted from a laser is very different from any other light sources with which you may be aware of Laser light is thousands of times more concentrated than any light from any other kind of light source This concentration of light can cause instant eye injuries primarily by burning the retina the back of your eyeball contatining cells that are sensitive to light Even if you cannot feel heat from a laser beam it can still poten tially injure or blind you or your audience Even very small amounts of laser beam light are potentially hazardous even at long distances Laser eye injuries can be sustained faster than you can blink Do not think that because this laser splits the laser beam into hun dreds of beams and that the laser beam is scanned out in high speed that an individual laser beam is safe for eye exposure This laser uses dozens of milliwatts of laser power Class 3B levels inter nally before it splits into multiple beams Class 3R levels Many of the individual beams are potentially hazardous to the eyes Do not that because the laser light is moving it is safe This is not true Nor do the laser beams always move Since eye injuries can occur instantly it is critical to prevent even the smallest possibility of any direct eye exposure In the laser safety regulation it is not legal to aim Class 3R lasers in areas which people can get exposed This is true even if it is aimed below people s faces s
12. uch as on a dance floor Do not operate the laser without first reading and understanding all safety and technical data in this manual Always set up and install all laser effects so that all laser light is at least 3 meters 9 8 feet above the floor on which people can stand ADJ Products LLC www adj com Micro Sky Instruction Manual Page 5 Micro Sky Laser Warnings and Safety After setting up and before public use test laser to ensure proper function Do not use if any defect is detected Do not use if laser emits only one or two laser beams rather than dozens hundreds as this could indicate damage to the diffraction grating optic and could allow emission of higher laser levels above Class 3R Do not point lasers at people or animals Never look into the laser aperture or laser beams Do not point lasers in areas in which people can potentially get exposed such as uncontrolled balconies etc Do not point lasers at highly reflective surfaces such as windows mirrors and shiny metal Even laser reflections can be hazardous Never point a laser at aircraft this is a federal offense Never point un terminated laser beams into the sky Do not expose the output optic aperture to cleaning chemicals Do not use laser if the laser appears to be emitting only one or two beams Do not use the laser if the housing is damaged the housing is open or if the optics appear damaged in any way Never open the laser housing The h
13. w auto mode When the red indicator light located on the front of the unit turns off but flashes to the beat of the music the unit is in sound active mode B Button Use this button to Blackout the unit C Button Use this button to scroll and select patterns D Button Use this button to select a show Micro Sky Remote Activation amp Erase Erase Remote Code Using a small utensil carefully press and hold the Remote Code button 5 for at least 7 seconds Activating and Linking Remote This action will set the code to link the laser to your remote You can link more then one laser to a remote Using a small untensil carefully press and hold the Remote Code button 5 for at least 3 seconds Try to control the unit with the remote If the unit can be controlled setting the code was successful If it does not control the unit try agin ADJ Products LLC www adj com Micro Sky Instruction Manual Page 9 Micro Sky Cleaning Fixture Cleaning Due to fog residue smoke and dust cleaning the internal and external lenses should be carried out periodically to optimize light output 1 Use normal glass cleaner and a soft cloth to wipe down the out side casing 2 Clean the external optics with a microfiber cloth every 20 days 3 Always be sure to dry all parts completely before plugging the unit back in Cleaning frequency depends on the environment in which the fixture operates l e smoke fog residue dust dew I
14. xpenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of ADJ Products LLC under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of ADJ Products LLC All products covered by this warranty were manufactured after August 15 2012 and bear indentifying marks to that effect E ADJ Products LLC reserves the right to make changes in design and or improvements upon its products without any obligation to include these changes in any products theretofore manufactured No warranty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all implied warranties made by ADJ Products LLC in connection with this product including warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall ADJ Products LLC be liable for any loss or damage direct or consequential arising out of the use of or inability to use this product This warranty is the only written warranty a
Download Pdf Manuals
Related Search