WMI 7462 W20
Contents
1. 15 Tips for efficient washing 17 5 Operating the product 18 Control panel 18 Display symbols 18 Preparing the machine 19 Programme selection 19 Main programmes 19 Additional programmes 19 Temperature selection 20 3 Spin speed selection 21 Programme and consumption table 22 Auxiliary function selection 23 Time display 24 Starting the programme 24 Progress of programme 25 Loading door lock 25 Changing the selections after programme has started 25 Child LOCK ebd nacht dats ets 26 Cancelling the programme 26 Machine is in Rinse Hold mode 26 End of programme 26 6 Maintenance and cleaning27 Cleaning the detergent drawer 27 Cleaning the loading door and the OUI is scum io ae ate ae eR anie aee 27 Cleaning the body and control panel 27 Cleaning the water intake filters 28 Draining remaining water and cleaning the PUMP TIIer ces essen 28 7 Troubleshooting 30 8 Guarantee 36 9 Service 37 10BUILT IN INSTALLATION 38 EX Your washing machine Overview 1 Power cable 5 Adjustable feet 2 Top lid 6 Loading door 3 Control panel 7 Detergent drawer 4 Filter cap2. Dry horizontally Dry on a hanger BJ X Can be ironed with warm iron Preparing laundry for washing Laundry items with metal attachments such as underwired bras belt buckles or metal buttons will damage the machine Remove the metal pieces or wash the clothes by putting them in a laundry bag or pillow case Take out all substances in the pockets such as coins pens and paper clips and turn pockets inside out and brush Such objects may damage the product or cause noise problem Put small size clothes such as infant s socks and nylon stockings in a laundry bag or pillow case Place curtains in without compressing them Remove curtain attachment items Fasten zippers sew loose buttons and mend rips and tears Wash machine washable or hand washable labeled products only with an appropriate programme Do not wash colours and whites together New dark coloured cottons release a lot of dye Wash them separately Tough stains must be treated properly before washing If unsure check with a dry cleaner Use only dyes colour changers and limescale removers suitable for machine wash Always follow the instructions on the package Wash trousers and delicate laundry turned inside out Keep laundry items made of Angora wool in the freezer for a few hours before washing This will reduce pilling Laundry that are subjected to materials such as flour lime dust milk powder etc intensely must b
3. For children s safety cut the power cable and break the locking mechanism of the loading door so that it will be nonfunctional before disposing of the product EN El Preparation Things to be done for energy saving Following information will help you use the product in an ecological and energy efficient manner Operate the product in the highest capacity allowed by the programme you have selected but do not overload see Programme and consumption table Always follow the instructions on the detergent packaging Wash slightly soiled laundry at low temperatures Use faster programmes for small quantities of lightly soiled laundry Do not use prewash and high temperatures for laundry that is not heavily soiled or stained If you plan to dry your laundry in a dryer select the highest spin speed recommended during washing process Do not use detergent in excess of the amount recommended on the detergent package Sorting the laundry Sort laundry according to type of fabric colour and degree of soiling and allowable water temperature Always obey the instructions given on the garment tags 13 d Wash with sensitive Short programmes w P o se 8 23 c 7 95 8 20 EE t w Ej ES ot 8 985 2 2 c o o Ss o o LA et Suitable for drier Do not dry with drier E BJ Can be ironed with hot iron Do not wash Do not dry clean Non machine washable Dry cleanable
4. detergent manufacturer s measuring cup and follow the instructions on the package Powder bleach stain remover must also be put into this compartment Put the liquid detergent into the main wash compartment with number Il 6 before starting the washing Programme Liquid stain remover must be put into this compartment Put the suggested amount of liquid detergent into the left compartment with 1 symbol and dilute it to the maximum filling level line max Il 6 with warm water Particularly the concentrated detergents must be diluted with warm water otherwise the siphon may get clogged in time Do not fill the detergent above the maximum filling level line otherwise the excess amount of detergent will reach the laundry without water and may cause stains on the garments In this case you will need to refill the compartment Do not pour the detergent onto the laundry directly since this may cause stains on the garments Liquid Softener Compartment Put the suggested amount of liquid softener into the right compartment with se symbol and dilute it to the maximum filling level line max with warm water Particularly the concentrated softeners must be diluted with warm water otherwise the siphon may get clogged in time Do not fill the softener above the maximum filling level line otherwise the excess amount of softener will get mixed with the washing water and you will need to refill the compartment Do
5. risk of flooding and possible injury due to the hot water Never force open the locked door The door will be ready to open just a few minutes after the washing cycle comes to an end Unplug the machine when it is not in use Never wash down the appliance with a water hose There is the risk of electric shock Always disconnect from the mains by unplugging before cleaning Never touch the plug with wet hands Never unplug by pulling on the cable always pull out from the plug only Do not operate the machine if the power cord or plug is damaged Never attempt to repair the machine yourself Otherwise you may be putting yours and other s lives in danger For malfunctions that cannot be solved by information in the operating manual Turn off the machine unplug it turn off the water tap and contact an authorized service agent If there are children in your house Electrical appliances may be dangerous for the children Keep children away from the machine when it is operating Do not let them tamper with the machine Close the door when you leave the area where the machine is located Store all detergents in a safe place out of reach of the children 7 EN Installation Refer to the nearest Authorised Service Agent for installation of the product To make the product ready for use review the information in the user manual and make sure that the electricity tap water supply and water drainage system
6. 8 Drain hose 4 EN Technical specifications Wanem m Height cm Net weight 6 KG i Technical specifications may be changed without prior notice to improve the quality of the product Figures in this manual are schematic and may not match the product exactly i Values stated on the product labels or in the documentation accompanying it are obtained in laboratory conditions in accordance with the relevant standards Depending on operational and environmental conditions of the product these values may vary 5 E 2 Warnings Please read the following information Otherwise there may be the risk of personal injury or material damage Moreover any warranty and reliability commitment will become void General Safety Never place your machine on a carpet covered floor Otherwise lack of airflow from below of your machine may cause electrical parts to overheat This may cause problems with your washing machine If the power cable or mains plug is damaged you must call Authorized Service for repair Check water hoses for wear Do not use old used water inlet hoses These may cause stains on your laundry Fit the drain hose into the discharge housing securely to prevent any water leakage and to allow machine to take in and discharge water as required It is very important that the water intake and drain hoses are not folded squeezed or broken when the appliance is pushed into pla
7. For curtains and tulle use the Synthetic 40 C programme with prewash and anti creasing functions selected As their meshed texture causes excessive foaming wash the veils tulle by putting little amount of detergent into the main wash compartment Do not put detergent in the prewash compartment Woollens Use this programme to wash your woolen clothes Select the appropriate temperature complying with the tags of your clothes Use appropriate detergents for woolens Additional programmes For special cases additional programmes are available in the machine i Additional programmes may differ according to the model of the machine Cottons Eco You may wash your normally soiled durable cotton and linen laundry in this programme with the highest energy and water saving compared to all other wash programmes suitable for cottons Actual water temperature may differ from the declared cycle temperature Programme duration may automatically be shortened during later stages of the programme if you wash less amount e g Y capacity or less of laundry In this case energy and water consumption will be further decreased giving you the opportunity for a more economical wash This feature is available for certain models having remaining time display Hygiene Use this programme to wash baby laundry and the laundry that belongs to allergic persons Longer heating time and an additional rinsing step provide a higher leve
8. If the anti limescale is in tablet form put only one tablet into compartment nr Il Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end i Use an anti limescale suitable for the washing machines i Some water might have remained in the product due to the quality control processes in the production It is not harmful for the product Disposing of packaging material Packaging materials are dangerous to children Keep packaging materials in a safe place away from reach of the children Packaging materials of the product are manufactured from recyclable materials Dispose of them properly and sort in accordance with recycled waste instructions Do not dispose of them with normal domestic waste 12 Transportation of the product 1 Unplug the product before transporting it 2 Remove water drain and water supply connections 8 Drain the remaining water in the product completely see Draining remaining water and cleaning the pump filter 4 Install transportation safety bolts in the reverse order of removal procedure see Removing the transportation locks i Never move the product without the transportation safety bolts properly fixed in place Disposing of the old product Dispose of the old product in an environmentally friendly manner Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your product
9. Spin and Rinse programmes as well 01000 602 01000 SO ire Besse Spin speed selection Whenever a new programme is selected the recommended spin speed of the Selected programme is displayed on the spin speed indicator To decrease the spin speed press the Spin Speed Adjustment button Spin speed decreases gradually Then depending on the model of the product Rinse Hold and No Spin options appear on the display See Auxiliary function selection section for explanations of these options Rinse Hold option is indicated with 1 symbol and No Spin option is 21 E Programme and consumption table Programme C ottons ottons ottons ygiene ottons Eco ottons Eco ottons Eco ottons Eco ynthetics ynthetics otton 20 Lingerie ii IE o lt 0 14 Full Load Full Load Full Load ollens d Wash Wash achine Care efresh 3 a 1 TET ET ii a gt 216 O e 2 l e Selectable Water Consumption 74 o Q o Q O 2 TD n s 8 r 74 7 66 z 66 z 6 7 60 100 2 20 RE 20 5 so 5 MERI 20 Consumption KWh Energy Ol co cn ajo N Ll o er o O olo a s o N N E o O o gt a o O alo AN SJEN o airs Oo m 3 0 als o ho o o w o io a o a a a EN O Automatically
10. Your house will be flooded if the hose comes out of its housing during water discharge Moreover there is risk of scalding due to high washing temperatures To prevent such situations and to ensure smooth water intake and discharge of the machine fix the end of the discharge hose tightly so that it cannot come out 9 EN The hose should be attached to a height of at least 40 cm and 100 cm at most In case the hose is elevated after laying it on the floor level or close to the ground less than 40 cm above the ground water discharge becomes more difficult and the laundry may come out excessively wet Therefore follow the heights described in the figure To prevent flowing of dirty water back into the machine and to allow for easy discharge do not immerse the hose end into the dirty water or drive it in the drain more than 15 cm If it is too long cut it short The end of the hose should not be bent it should not be stepped on and the hose must not be pinched between the drain and the machine If the length of the hose is too short use it by adding an original extension hose Length of the hose may not be longer than 3 2 m To avoid water leak failures the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak Adjusting the feet In order to ensure that the product operates more silent and vibration free it must s
11. be mixed with other waste This way the appliance recycling MEM organised by your manufacturer will be done under the best possible conditions in compliance with European Directive 2002 96 EC on Waste Electrical and Electronic Equipment Contact your town hall or your retailer for the used appliance collection points closest to your home We thank you doing your part to protect the environment 2 EN TABLE OF CONTENTS 1 Your washing machine 4 Overview 4 Technical specifications 5 2 Warnings 6 General Safety 6 First Uses sa qoc 4 ah a ee ee 6 Intended use 6 Safety instructions 7 If there are children in your house 7 3 Installation 8 Appropriate installation location 8 Removing packaging reinforcement 8 Removing the transportation locks 8 Connecting water supply 9 Connecting to the drain 9 Adjusting the feet 10 Raising the appliance 10 Electrical connection 11 A ue over 12 Disposing of packaging material 12 Transportation of the product 12 Disposing of the old product 12 4 Preparation 13 Things to be done for energy saving 13 Sorting the laundry 13 Preparing laundry for washing 13 Correct load capacity 14 Loading the laundry 14 Detergents and softeners
12. gt Clean or flatten the hose e Pump filter is clogged gt gt gt Clean the pump filter Machine might be standing unbalanced gt gt gt Adjust the feet to level the machine A hard substance might have entered into the pump filter gt gt gt Clean the pump filter Transportation safety bolts are not removed gt gt gt Remove the transportation safety bolts Laundry quantity in the machine might be too little gt gt gt Add more laundry to the machine Machine might be overloaded with laundry gt gt gt Take out some of the laundry from the machine or distribute the load by hand to balance it homogenously in the machine Machine might be leaning on a rigid item gt gt gt Make sure that the machine is not leaning on anything Machine might have stopped temporarily due to low voltage gt gt gt t will resume running when the voltage restores to the normal level e Draining hose might not be at adequate height gt gt gt Connect the water draining hose as described in the operation manual i The water level is not visible from outside of the washing machine This is not a failure 30 EN i i Door lock is activated because of the water level in the machine gt gt gt Drain the water by running the Pump or Spin programme Machine is heating up the water or it is at the spinning cycle gt gt gt Wait until the programme completes Child lock is engaged Door lock will be de
13. in water from the detergent drawer in the first rinsing step Bleach should not be mixed with detergent Since the bleach may cause irritation on skin little amounts must be used and rinsed thoroughly Do not pour bleach directly onto the laundry and do not use it with colour laundry When using oxygen based bleach follow the instructions on the package and select a Programme at low temperature Oxygen based bleach can be used together with the detergent However if it is not at the same thickness with the detergent then it must be added from the compartment number II right after the detergent foams with water Eliminating lime formation e When required use only appropriate lime removers developed specifically for washing machines and always follow the instructions on the package 16 EN Tips for efficient washing Soiling Level Heavily Soiled difficult stains such as grass coffee fruits Light colours and whites Recommended emperature range based on soiling level 40 900 It may be necessary to pre reat the stains of perform prewash Powder and iquid detergents recommended or whites can be used at dosages recommended or heavily soiled clothes It is recommended O use powder detergents to clean clay and soil stains and the stains that are sensitive to bleaches Powder and liquid detergents Clothes Recommended temperature range based on soiling level cold 400 Po
14. is not drained completely gt gt gt Check the filter and the draining hose Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage gt gt gt Use recommended amount of detergent Insufficient amount of detergent was used over a long period of time gt gt gt Use the recommended amount of detergent appropriate for water hardness and the laundry Washing was made at low temperatures for a long time over a long period of time gt gt gt Select the proper temperature for the laundry to be washed Insufficient amount of detergent is used with hard waters gt gt gt Using insufficient amount of detergent with hard water causes the soil to stick on the cloth and this turns the cloth into gray in time It is difficult to eliminate graying once it happens Use the recommended amount of detergent appropriate for water hardness and the laundry Too much detergent is used gt gt gt Use the recommended amount of detergent appropriate for water hardness and the laundry Regular drum cleaning is not applied gt gt gt Clean the drum regularly For this please see Cleaning the loading door and the drum Insufficient amount of detergent is used gt gt gt Use recommended amount of detergent appropriate for the laundry Excessive laundry was loaded in gt gt gt Do not load the machine in excess Load with amounts recommended in the Programme and consu
15. no foreign substance is left in the drum If the holes on the bellow shown in the figure is blocked open the holes using a toothpick i Foreign metal substances in your machine will cause rust stains Clean the stains on the drum surface by using cleaning agents for stainless steel Never use steel wool or wire wool Cleaning the body and control panel Wipe the body of the machine with Soapy water or non corrosive mild gel detergents as necessary and dry with a Soft cloth Use only a soft and damp cloth to clean the control panel Never use sponge or scrub materials These will damage the painted and plastic surfaces Cleaning the water intake filters There is a filter at the end of each water intake valve at the rear of the machine and also at the end of each water intake hose where they are connected to the tap These filters prevent foreign substances and dirt in the water to enter the washing machine Filters should be cleaned as they do get dirty Close the taps 2 Remove the nuts of the water intake hoses to access the filters on the water intake valves Clean them with an appropriate brush If the filters are too dirty take them out by means of pliers and clean them 3 Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under running water 4 Replace the gaskets and filters carefully in their places and tighten
16. not pour the softener onto the laundry directly since this may cause stains on the garments Liquid softener will be dispensed automatically at the final rinsing step of the washing Programme I Pre Wash Compartment Put the powder pre wash detergent or powder stain remover into the middle compartment with number I You can also put liquid bleach into this compartment while the machine takes in water during pre wash or first rinsing step Adding the liquid bleach while the machine takes in water allows it to be diluted before it is poured onto the laundry You must select extra rinsing option if you use liquid bleach in a washing Programme Bleach must be removed from the laundry with rinsing otherwise it may cause itching on the skin i Read the dosage instructions and label of your garments carefully before using the liquid bleach Starch e Add liquid starch powder starch or the dyestuff into the softener compartment as instructed on the package e Never use fabric softener and starch together in the same washing cycle e Wipe the inside of the drum after using starch Bleaches If you are going to use regular bleach in your machine it is suggested to select a Programme with pre wash step and add the bleach at the beginning of the pre wash without putting detergent into the pre wash compartment Alternatively it is Suggested to select a Programme with extra rinsing and add the bleach while the machine takes
17. thanks to the additional rinsing Refresh Use this programme to remove the odour on the laundry that are worn only for once and do not contain any stains or dirt Cotton 20 Use this programme which is much more sensitive to environment and natural resources to wash your lightly soiled and unstained cotton laundry max 3 5 kg in a short time and economically i It is recommended to use liquid detergent or gel washing detergent Machine Care Use this programme regularly once in every 1 2 months to clean the drum and provide the required hygiene Run the programme without any laundry in the machine To obtain better results put powder limescale remover for washing machines into the detergent compartment Il When the programme is over leave the loading door ajar so that the inside of the machine gets dry i This is not a washing programme It is a maintenance programme i Do not run the programme when there is something in the machine If you try to do so the machine detects that there is a load inside and aborts the programme Special programmes For specific applications select any of the following programmes Rinse Use this programme when you want to rinse or starch separately Spin Pump Use this programme to apply an additional spin cycle for your laundry or to drain the water in the machine Before selecting this programme select the desired spin speed and press Start Pause C
18. the hose nuts by hand Draining remaining water and cleaning the pump filter The filter system in your machine prevents solid items such as buttons coins and fabric fibers clogging the pump impeller during discharge of washing water Thus the water will be discharged without any problem and the service life of the pump will extend If the machine fails to drain water the pump filter is clogged Filter must be cleaned whenever it is clogged or in every 8 months Water must be drained off first to clean the pump filter In addition prior to transporting the machine eg when moving to another house and in case of freezing of the water water may have to be drained completely Foreign substances left in the pump filter may damage your machine or may cause noise problem In order to clean the dirty filter and discharge the water 1 Unplug the machine to cut off the supply power Temperature of the water inside the machine may rise up to 90 C To avoid burning risk filter must be cleaned after the water in the machine cools down 2 Open the filter cap If the filter cap is composed of two pieces press the tab on the filter cap downwards and pull the piece out towards yourself If the filter cap is one piece pull the cap from both sides at the top to open i You can remove the filter cover by slightly pushing downwards with a thin plastic tipped tool through the gap above the filter cover Do no
19. without grounding To make your machine ready for use please be sure that the tap water supply and water drainage systems are appropriate before calling the authorized service If they are not call a qualified plumber to have any necessary arrangements carried out Intended use 6 EN This product has been designed for home use The appliance may only be used for washing and rinsing of textiles that are marked accordingly Only detergents softeners and Supplements suitable for washing machines may be used Observe the care instructions labelled on textile products and any other instructions given by companies that produce detergents for your machine This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Safety instructions This appliance must be connected to an earthed outlet protected by a fuse of suitable capacity The supply and draining hoses must always be securely fastened and remain in an undamaged state Fit the draining hose to a washbasin or bathtub securely before starting up your machine There may be a risk of being scalded due to high washing temperatures Never open the door or remove the filter while there is still water in the drum Otherwise there may be the
20. User Manual 28205221 25 230811 1345 Please read this user manual first Dear Customer We hope that you get the best results from the product which has been manufactured in state of the art plants and passed through a strict quality control procedure Therefore please read the entire user manual carefully before using the product and keep it as a reference for future use In case of transferring the product to someone else give the manual as well The user manual will help you use your machine in a fast and safe way e Read the user manual before installing and starting your product e Always follow the safety instructions e Keep this user manual within easy reach for future reference e Read also the other documents supplied with the product Remember that this user manual is also applicable for several other models Differences between models will be identified in the manual Explanation of symbols Throughout this user manual the following symbols are used i Important information or useful hints about usage A Warning for hazardous situations with regard to life and property A Warning for electric shock This appliance s packaging material is recyclable Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose Your appliance also contains a great amount of recyclable material It is marked with this label to indicate the used appliances that should not
21. activated a couple of minutes after the programme has come to an end gt gt gt Wait for a couple of minutes for deactivation of the door lock Water pressure is low gt gt gt Machine waits until taking in adequate amount of water to prevent poor washing quality due to the decreased amount of water Therefore the washing time extenas Voltage might be low gt gt gt Washing time is prolonged to avoid poor washing results when the supply voltage is low Input temperature of water might be low gt gt gt Required time to heat up the water extends in cold seasons Also washing time can be lengthened to avoid poor washing results Number of rinses and or amount of rinse water might have increased gt gt gt Machine increases the amount of rinse water when good rinsing is needed and adds an extra rinsing step if necessary Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage gt gt gt Use recommended amount of detergent Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment Laundry should be rearranged and re spun Timer may stop during water intake gt gt gt Timer indicator will not countdown until the machine takes in adequate amount of water The machine will wait until there is sufficient amount of water to avoid poor washing resu
22. ancel button The machine will spin the laundry with the set spin speed and drain the water coming out of them If you wish to drain only the water without spinning your laundry select the Pump Spin programme and then select the No Spin function with the help of Spin Speed Adjustment button Press Start Pause Cancel button i Use a lower spin speed for delicate laundries Temperature selection Whenever a new programme is selected the maximum temperature for the selected programme appears on the temperature indicator To decrease the temperature press the Temperature Adjustment button 20 EN Temperature decreases with increments indicated with ZZ symbol of 10 and finally symbol indicating the cold wash option appears on the L1 5l display ne Ge ib e 68 1008 ke ESTADO PY 11071 7 LL 0 i If you scroll to cold wash option and press Temperature Adjustment button again the recommended temperature for the selected programme appears on the display Press the Temperature Adjustment button again to decrease the temperature Economy symbol Indicates the programmes and temperatures that provide energy savings i Economy symbol can not be selected in Intensive and Hygiene programmes since washing is performed in long times and at high temperatures in order to provide hygiene Similarly Economy symbol can not be selected in Baby Refresh Drum Cleaning
23. blind stopper group If you want to use both water inlets of the product connect the hot water hose after removing the stopper and gasket group from the hot water valve Applies for the products supplied with a blind stopper group Models with a single water inlet should not be connected to the hot water tap In such a case the laundry will get damaged or the product will Switch to protection mode and will not operate Do not use old or used water inlet hoses on the new product It may cause stains on your laundry Connect the special hoses supplied with the product to the water inlets on the product Red hose left max 90 9C is for hot water inlet blue hose right max 25 C is for cold water inlet IN Ensure that the cold and hot water connections are made correctly when installing the product Otherwise your laundry will come out hot at the end of the washing process and wear out Tighten all hose nuts by hand Never use a wrench when tightening the nuts Open the taps completely after making the hose connection to check for water leaks at the connection points If any leaks occur turn off the tap and remove the nut Retighten the nut carefully after checking the seal To prevent water leakages and damages caused by them keep the taps closed when the machine is not in use Connecting to the drain The end of the drain hose must be directly connected to the wastewater drain or to the washbasin
24. ce after it is installed or cleaned Your washing machine is designed to continue operating in the event of a power interruption You cannot cancel any program by pressing the On Off button Your machine will not resume its program when the power restores Press the Start Pause Cancel button for 3 seconds to cancel the program See Cancelling a Program There may be some water in your machine when you receive it This is from the quality control process and is normal It is not harmful to your machine Some problems you may encounter may be caused by the software Press Start Pause Cancel button for 3 seconds to cancel the program set in your machine before calling the authorized service First Use To prepare your machine for washing carry out your first washing process without loading your machine and with detergent under Cottons 90 C program Ensure that the cold and hot water connections has been made correctly when installing your machine Otherwise your laundry may come out hot at the end of the washing process and may wear out If the current fuse or circuit breaker is less than 16 Amperes please have a qualified electrician install a 16 Ampere fuse or circuit breaker While using with or without a transformer do not neglect to have the grounding installation laid by a qualified electrician Our company shall not be liable for any damages that may arise when the machine is used on a line
25. cified in the programme table Rinse Plus This function enables the machine to make another rinsing in addition to the one already made after the main wash Thus the risk for sensitive skins babies allergic skins etc to be effected by the minimal detergent remnants on the laundry can be reduced F3 appears on the display when you select this function c Anti creasing This function creases the clothes lesser when they are being washed Drum movement is reduced and spinning Speed is limited to prevent creasing In addition washing is done with a higher water level F4 appears on the display when you select this function d Rinse Hold If you are not going to unload your clothes immediately after the programme completes you may use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine Press Start Pause Cancel button after this process if you want to drain the water without spinning your laundry Programme will resume and complete after draining the water If you want to spin the laundry held in water adjust the Spin Speed and press Start Pause Cancel button The programme resumes Water is drained laundry is spun and the programme is completed Soaking The Soaking auxiliary function ensures better removal of stains ingrained into the clothes by holding them in the detergent water prior to startup of the program
26. clean the dispenser with hot water Regular drum cleaning is not applied gt gt gt Clean the drum regularly For this please see Cleaning the loading door and the drum Detergent is put in the wrong compartment gt gt gt f detergent is put in the prewash compartment although prewash cycle is not selected machine can take this detergent during rinsing or softener step Wash and clean the dispenser with hot water Put the detergent in the correct compartment Detergent might be mixed with the softener gt gt gt Do not mix the softener with detergent Wash and clean the dispenser with hot water Regular drum cleaning is not applied gt gt gt Clean the drum regularly For this please see Cleaning the loading door and the drum 33 EN e Detergent is put in wet drawer gt gt gt Dry the detergent drawer before putting in detergent e Detergent has gotten damp gt gt gt Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures Water pressure is low gt gt gt Check the water pressure The detergent in the main wash compartment got wet while taking in the prewash water Holes of the detergent compartment are blocked gt gt gt Check the holes and clean if they are clogged e There is a problem with the detergent drawer valves gt gt gt Call the Authorized Service Agent e Detergent might be mixed with the softener gt gt gt Do not mix the softener wi
27. consumption table and the temperature table below Heavily soiled white cottons 90 C and linens coffee table covers tableclothes towels bed sheets etc Normally soiled coloured fade proof cottons or synthetic 60 C clothes shirt nightgown pajamas etc and lightly soiled white linens underwear etc 40 C Blended laundry including 30 C delicate textile veil curtains Cold etc synthetics and woolens 2 Select the desired programme with the Programme Selection button i Programmes are limited with the highest spin speed appropriate for that particular type of fabric i When selecting a programme always consider the type of fabric colour degree of soiling and permissible water temperature i Always select the lowest required temperature Higher temperature means higher power consumption i For further programme details see Programme and consumption table Main programmes Depending on the type of fabric use the following main programmes Cottons Use this programme for your cotton laundry such as bed sheets duvet and pillowcase sets towels bathrobes underwear etc Your laundry will be washed with vigorous washing action for a longer washing cycle 19 Synthetics Use this programme to wash your synthetic clothes shirts blouses synthetic cotton blends etc It washes with a gentle action and has a shorter washing cycle compared to the Cottons programme
28. ct the proper programme and temperature according to the type and soiling degree of the laundry Regular drum cleaning is not applied gt gt gt Clean the drum regularly For this please see Cleaning the loading door and the drum The amount brand and storage conditions of the detergent used are inappropriate gt gt gt Use a detergent appropriate for the washing machine and your laundry Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures Detergent is put in the wrong compartment gt gt gt f detergent is put in the prewash compartment although prewash cycle is not selected machine can take this detergent during rinsing or softener step Put the detergent in the correct compartment Pump filter is clogged gt gt gt Check the filter Drain hose is folded gt gt gt Check the drain hose Insufficient amount of detergent is used gt gt gt Using insufficient amount of detergent for the water hardness can cause the laundry to become stiff in time Use appropriate amount of detergent according to the water hardness Detergent is put in the wrong compartment gt gt gt f detergent is put in the prewash compartment although prewash cycle is not selected machine can take this detergent during rinsing or softener step Put the detergent in the correct compartment Detergent might be mixed with the softener gt gt gt Do not mix the softener with detergent Wash and
29. ctivated due to the unbalanced distribution of the laundry in the machine Loading door lock There is a locking system on the loading door of the machine that prevents opening of the door in cases when the water level is unsuitable Door Locked symbol appears when the loading door is locked This symbol will flash until the loading door becomes 25 ready to open when programme completes or the machine is paused Do not force to open the loading door in this Step Symbol disappears when the door is ready to open You can open the door when the symbol disappears Changing the selections after programme has started Switching the machine to pause mode Press the Start Pause Cancel button to switch the machine to pause mode Pause symbol appears on the display indicating that the machine is paused Start symbol disappears 11 07 LI 1 LIL wy N Changing the speed and temperature settings for auxiliary functions Depending on the step the programme has reached you may cancel or activate the auxiliary functions see Auxiliary function selection You may also change the speed and temperature settings see Spin speed selection and Temperature selection Adding or taking out laundry 1 Press the Start Pause Cancel button to switch the machine to pause mode The programme follow up light of the relevant step during which the machine was switched into the pause mode will flash Wait until t
30. e shaken off before placing into the machine Such dusts and powders on the laundry may build up on the inner parts of the machine in time and can cause damage 14 Correct load capacity The maximum load capacity depends on the type of laundry the degree of soiling and the washing programme desired The machine automatically adjusts the amount of water according to the weight of the loaded laundry Follow the information in the Programme and consumption table When overloaded machine s washing performance will drop Moreover noise and vibration problems may occur Laundry types and their average weights in the following table are given as examples Laundry type Weight g Bathrobe 1200 Napkin 100 Duvet cover 700 Bed Sheet 500 Pillowcase 200 Tablecloth 250 Towel 200 Hand towel 100 Evening gown 200 Underclothing 100 Men s overalls 600 Men s shirt 200 Men s pajamas 500 Blouses 100 roading the laundry Open the loading door e Place laundry items loosely into the machine e Push the loading door to close until you hear a locking sound Ensure that no items are caught in the door i The loading door is locked while a programme is running The door can only be opened a while after the programme comes to an end In case of misplacing the laundry noise and vibration problems may occur in the machine EN Detergents and softeners Detergent Drawer Deter
31. e blomberguk com www blomberguk com
32. en and silk clothes must be washed with special woollen detergents Prefer liquid detergents produced for delicate clothes Woollen and silk clothes must be washed with special woollen detergents Prefer liquid detergents produced for delicate clothes Woollen and silk clothes must be washed with special woollen detergents Operating the product Control panel 000 4 4 Spin Speed Adjustment button Display Temperature Adjustment button Programme Selection knob On Off button Delayed Start buttons Auxiliary Function buttons Start Pause Cancel button 4 2 3 4 5 6 7 8 Display symbols c a mg b d DOODOQp0 3 TA TO 18 EN Spin Speed indicator Temperature indicator Spin symbol Temperature symbol Remaining Time and Delayed Start indicator Programme Indicator symbols Prewash Main Wash Rinse Softener Spin Economy symbol Delayed Start symbol Door Locked symbol Start symbol Pause symbol Auxiliary Function symbols No Water symbol Preparing the machine 1 Make sure that the hoses are connected tightly 2 Plug in your machine 3 Turn the tap on completely 4 Place the laundry in the machine 5 Add detergent and fabric softener Programme selection 1 Select the programme suitable for the type quantity and soiling degree of the laundry in accordance with the Programme and
33. ers Food loss insurance is often included within your household contents insurance policy or may be available separately from your retailer Important notes Your Blomberg product is designed and built for domestic household use only The guarantee will be void if the product is installed or used in commercial or non residential domestic household premises 36 EN The product must be correctly installed located and operated in accordance with the instructions contained in the User Instructions Booklet provided Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all Washing Machines Dishwashers and Electric Cookers Gas Cookers must only be installed by a CORGI or BORD GAIS registered Gas Installer The guarantee is given only within the boundaries of the United Kingdom and the Republic of Ireland The guarantee is applicable only to new products and is not transferable if the product is resold Blomberg disclaims any liability for incidental or consequential damages The guarantee does not in anyway diminish your statutory or legal rights Should you experience any difficulty in obtaining service please contact the Blomberg Customer Help Line Tel 0845 604 6859 E Service Please keep your purchase receipt or other proof of purchase in a safe place you will need to have it should the product require attention under guarantee You should also compl
34. ete the details below it will help us assist you when requesting service The model number is printed on the Instruction Booklet and the serial number is printed on the Rating Label affixed to the appliance Model No Serial No Retailer Date of purchase Before requesting service please check the trouble shooting guide in the Operating Instructions as a charge may be levied where no fault is found even though your product may still be under guarantee Service once the manufacturers guarantee has expired If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee agreement document Otherwise please call the appropriate number above where service can be obtained at a charge Should you experience any difficulty in obtaining service please contact the Blomberg Customer Help Line Tel 0845 604 6859 37 E JJ BUILT IN INSTALLATION TIT f gt 11111 IF THE CABINET DOOR OPENS TO RIGHT Use 35mm hinge cutting tool IF THE CABINET DOOR OPENS TO LEFT B Service Ref No 1493 Service Ref No 1493 To increase height of product order optional part no 1493 Blomberg 36 38 Caxton Way Watford Hertfordshire WD18 8UF Tel 0845 6048340 Fax 0845 6004922 email servic
35. gent drawer of your washing machine consists of four different compartments for powder main wash detergent liquid main wash detergent liquid softener and powder pre wash detergent Each of these laundry additives are dispensed automatically in the relevant time during the washing Programme Do not place the laundry additives directly into the drum Always use the detergent drawer Do not close the drawer too fast after putting the laundry additives This may cause the additives be dispensed early creating unsatisfactory washing results and fabric damage i Do not open the drawer during washing Programme The detergent drawer compartments are indicated below 1 Left compartment with number Il Main wash compartment for powder detergent or powder bleach stain remover 2 Left compartment with number Il Main wash compartment for liquid detergent or liquid stain remover 3 Middle compartment with number pre wash compartment for powder detergent powder stain remover or liquid bleach liquid bleach must be added either during the pre wash or during the first rinsing step of the washing Programme Liquid bleach must be added manually while the machine takes in water 4 Right compartment with 3 symbol liquid softener compartment 15 EN Il Main Wash Compartment Before starting the washing Programme put powder detergent into the left compartment with number Il Use the
36. gt gt Clean the drum regularly For this please see Cleaning the loading door and the drum e Too much detergent is used gt gt gt Mix 1 tablespoonful softener and water and pour into the main wash compartment of the detergent drawer i Put detergent into the machine suitable for the programmes and maximum loads indicated in the Programme and consumption table When you use additional chemicals stain removers bleaches and etc reduce the amount of detergent Laundry remains wet at the end of the programme e Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage gt gt gt Use recommended amount of detergent i Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment Laundry should be rearranged and re spun Machine does work Nothing is displayed on the screen The plug might not be plugged in the mains outlet Check the plug Fuse may have blown Check the fuse Electricity may be cut off Check the supply power The On Off button might have not Press this button been pressed The machine did not start after the program was selected and the Start Pause Cancel button was pressed The front door may be ajar The Rinse Symbol amongst the Program Indicator Symbols is f
37. handy to absorb any spilled water c When the water inside the machine is finished take out the filter completely by turning it 4 Clean any residues inside the filter as well as fibers if any around the pump impeller region 5 Install the filter If your product has a water jet feature be sure to fit the filter into its housing in the pump Never force the filter 29 E Troubleshooting e Washing machine has switched to self protection mode due to a supply problem line voltage water pressure etc gt gt gt Press and hold Start Pause Cancel button for 3 seconds to reset the machine to factory settings See Canceling the programme e Some water might have remained in the product due to the quality control processes in the production gt gt gt This is not a failure water is not harmful to the machine e Likely problems with hoses or the pump filter gt gt gt Be sure the seals of the water inlet hoses are securely fitted Attach the hose to the tap tightly e Pump filter might not be closed fully gt gt gt Make sure that the pump filter is completely closed Tap is turned off gt gt gt Open the inlet water taps fully Water inlet hose is bent gt gt gt Flatten the water inlet hose Water inlet filter is clogged Clean the water inlet filter e e e e The loading door is ajar gt gt gt Close the Loading Door e Water drain hose might be clogged or twisted gt gt
38. he Loading Door can be opened Open the Loading Door and add or take out the laundry Close the Loading Door Make changes in auxiliary functions temperature and speed settings if necessary 6 Press Start Pause Cancel button to start the machine i The loading door will not open if the water temperature in the machine is high or the water level is above the door opening OR Oo dw EN Child Lock Use Child Lock function to prevent children from tampering with the machine Thus you can avoid any changes in a running programme i You can switch on and off the machine with On Off button when the Child Lock is active When you switch on the machine again programme will resume from where it has stopped To activate the Child Lock Press and hold 2 and 4 Auxiliary Function buttons for 3 seconds Con appears on the display 200 CUS Lon i Same phrase will appear on the display if you press any button when Child Lock is enabled To deactivate the Child Lock Press and hold 2 and 4 Auxiliary Function buttons for 3 seconds COFF appears on the display e 600 Ela HFF LJ i Do not forget to disable the child lock at the end of the programme if it was enabled before Otherwise machine will not allow to select a new programme Cancelling the programme Press and hold Start Pause Cancel button for 3 seconds Start symbol flashes Symbo
39. l of hygiene Delicates Use this programme to wash your delicate clothes It washes with a gentle EN action without any interim spin compared to the Synthetics programme e Hand Wash Use this programme to wash your woolen delicate clothes that bear not machine washable tags and for which hand wash is recommended It washes laundry with a very gentle washing action to not to damage clothes e Fast Full Load Use this programme to wash your lightly soiled cotton clothes in a short time Mini 14 Use this programme to wash yout little amount of lightly soiled cotton clothes in a short time e Dark wash Use this programme to wash your dark coloured laundry or the laundry that you do not want it get faded Washing is performed with little mechanic action and at low temperatures It is recommended to use liquid detergent or woolen shampoo for dark coloured laundry e Intensive You can wash your durable and heavily soiled clothes on this program This program washes for a longer time and an extra rinse cycle will be made compared to the Cottons program You can use it for your heavily soiled clothes that you wish to be rinsed gently e Lingerie Use this programme to wash delicates such as underwears If there is little amount of laundry use a laundry net i Enclasp and button the clothes and zip up Washing is made at low temperatures and with less mechanical movements i Better rinsing results are obtained
40. l of the step at which the programme was cancelled remains lit End appears on the display and the programme is cancelled 26 8 550 bod End ul i If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading door since the water level in the machine is above the loading door opening then turn the Programme Selection knob to Pump Spin programme and discharge the water in the machine Machine is in Rinse Hold mode Spin symbol flashes and Pause symbol illuminates when the machine is in Rinse Hold mode If you want to spin your laundry when the machine is in this mode Adjust the spin speed and press Start Pause Cancel button Pause symbol disappears and Start symbol appears Programme resumes discharges the water and spins the laundry If you only want to drain the water without spinning Just press Start Pause Cancel button Pause symbol disappears Start symbol appears Programme resumes and discharges the water only End of programme End appears on the display at the end of the programme Symbols of the programme steps remain lit Auxiliary function spin speed and temperature that were selected at the beginning of the programme remain selected EN Maintenance and cleaning Service life of the product extends and frequently faced problems decrease if cleaned at regular intervals Cleaning the detergen
41. lashing Subject to the model of your machine water cut off symbol may light up too You can restart your machine by pressing the Water may have been cut off Start Pause Cancel button for a short time after ensuring that the water is not cut off A If you cannot eliminate the problem although you follow the instructions in this section consult your dealer or the Authorized Service Agent Never try to repair a nonfunctional product yourself E Guarantee Your new Blomberg product is guaranteed against the cost of breakdown repairs for 3 years from the date of the original purchase What is covered Repairs necessary as a result of faulty materials defective components or manufacturing defect The cost of functional replacement parts but excluding consumable items The labour costs of a Blomberg approved repairer to carry out the repair What is not covered Transit delivery or accidental damage or misuse and abuse Cabinet or appearance parts including knobs flaps handles or container lids Accessories or consumable items including but not limited to ice trays scrapers cutlery baskets filters and light bulbs Repairs required as a result of unauthorised repair or inexpert installation that fails to meet the requirements contained in the user instruction book Repairs to products used on commercial or non residential household premises Loss of frozen food in freezers or fridge freez
42. lectrician installa 13 Amp fuse e The specified voltage must be equal to your mains voltage e Do not make connections via extension cables or multi plugs ZA Damaged power cables must be replaced by the Authorized Service Agents Electrical requirements Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position Should the mains lead of the appliance become damaged or need replacing at any time it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent ZA This appliance must be earthed If the fitted moulded plug is not suitable for your socket then the plug should be cut off and an appropriate plug fitted Destroy the old plug which is cut off as a plug with a bared cord could cause a shock hazard if inserted into a socket elsewhere in the house The moulded plug on this appliance incorporates a 13A fuse Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used Do not forget to refit the fuse cover In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted Colour of the replacement fuse cover must be the same colour as tha
43. lts due to lack of water Timer indicator will resume countdown after this Timer may stop during heating step gt gt gt Timer indicator will not countdown until the machine reaches the selected temperature Timer may stop during spinning step gt gt gt Automatic unbalanced load detection 27 might be activated due to the unbalanced distribution of the launary in the rum Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment Laundry should be rearranged and re spun There might be an imbalance of laundry in the machine gt gt gt Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment Laundry should be rearranged and re spun 81 EN e There might be an imbalance of laundry in the machine gt gt gt Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum i Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment Laundry should be rearranged and re spun The machine will not spin if water
44. me Pet hair removal This function helps to remove pet hair that remain on your garments more EN effectively When you select this function Prewash and Extra Rinse steps are added to the normal programme Thus washing is performed with more water 30 and the pet hair is removed more effectively Never wash your pets in the washing machine Time display Remaining time to complete the programme appears on the display while the programme is running Tim is displayed as 01 30 in hours and minutes format 608 60 01 30 IDE i Programme time may differ from the values in the Programme and consumption table depending on the water pressure water hardness and temperature ambient temperature amount and the type of laundry auxiliary functions selected and the changes at the mains voltage Delayed start With the Delayed Start function the startup of the programme may be delayed up to 24 hours Delayed start time can be increased by increments of 30 minutes i Do not use liquid detergents when you set Delayed Start There is the risk of staining of the clothes 1 Open the loading door place the laundry and put detergent etc 2 Select the washing programme temperature spin speed and if required the auxiliary functions 3 Setthe desired delayed start time by pressing the Delayed Start or buttons Delayed Start symbol flashes 4 Press Start Pause Cancel button Dela
45. mption table Wrong programme and temperature were selected gt gt gt Select the proper programme and temperature for the laundry to be washed Wrong type of detergent is used gt gt gt Use original detergent appropriate for the machine Detergent is put in the wrong compartment gt gt gt Put the detergent in the correct compartment Do not mix the bleaching agent and the detergent with each other Regular drum cleaning is not applied gt gt gt Clean the drum regularly For this please see Cleaning the loading door and the drum e Regular drum cleaning is not applied gt gt gt Clean the drum regularly For this please see Cleaning the loading door and the drum Odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and or in short programmes gt gt gt Leave the detergent drawer as well as the loading door of the machine ajar after each washing Thus a humid environment favorable for bacteria cannot occur in the machine Regular drum cleaning is not applied gt gt gt Clean the drum regularly For this please see Cleaning the loading door and the drum 32 EN Excessive laundry was loaded in gt gt gt Do not load the machine in excess Detergent in use is damp gt gt gt Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures A higher temperature is selected gt gt gt Sele
46. on when the machine is operating For this the machine must be in a step before the auxiliary function you are going to select or cancel Depending on the programme press a b c or d buttons to select the desired auxiliary function Symbol of the selected auxiliary function appears on the display A i Some functions cannot be selected together If a second auxiliary function conflicting with the first one is selected before starting the machine the function selected first will be canceled and the second auxiliary function selection will remain active For example if you want to select Quick Wash after you have selected the Prewash Prewash will be canceled and Quick Wash will remain active i An auxiliary function that is not compatible with the programme cannot be selected See Programme and consumption table i Auxiliary Function buttons may vary according to the model of the machine Prewash A Prewash is only worthwhile for heavily soiled laundry Not using the Prewash will save energy water detergent and time F1 appears on the display when you Select this function a Shorter Wash This function can be used in Cottons and Synthetics programmes It decreases the 23 washing times and also the number of rinsing steps for lightly soiled laundry F2 appears on the display when you select this function b i When you select this function load your machine with half of the maximum laundry spe
47. r furniture 8 Removing packaging reinforcement Tilt the machine backwards to remove the packaging reinforcement Remove the en reinforcement by pulling the ribbon Removing the transportation locks Do not remove the transportation locks before taking out the packaging reinforcement Remove the transportation safety bolts before operating the washing machine otherwise the product will be damaged 1 Loosen all the bolts with a spanner until they rotate freely C Remove transportation safety bolts by turning them gently EN 3 Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel P P gt S i Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future Never move the product without the transportation safety bolts properly fixed in place Connecting water supply i The water supply pressure required 1 to run the product is between 1 to 10 bars 0 1 10 MPa It is necessary to have 10 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly Attach a pressure reducing valve if water pressure is higher If you are going to use the double water inlet product as a single cold water inlet unit you must install the supplied stopper to the hot water valve before operating the product Applies for the products supplied with a
48. ress Start Pause Cancel button to start the programme Starting the programme 1 Press Start Pause Cancel button to start the programme 2 Start symbol showing the startup of the programme will turn on 3 Loading door is locked and Door Locked symbol appears on the display 4 The symbol of the step from which the programme has started appears 24 EN on the display Prewash Main Wash Rinse Softener and Spin Progress of programme Progress of a running programme is indicated on the display with a set of symbols Relevant symbol appears on the display at the beginning of each programme step and all symbols remain lit at the end of the programme The farthermost right symbol indicates the current programme step Prewash If the Prewash auxiliary function is selected Prewash symbol appears on the display indicating that the prewash Step has started Main Wash Main Wash symbol indicating that the main wash step has started appears on the display Rinse Rinse symbol indicating that the rinsing step has started appears on the display Softener Softener symbol indicating that the softener step has started appears on the display Spin Appears at the beginning of the final spin step and remains lit during Spin and Pump special programmes i If the machine does not pass to the spinning step Rinse Hold function might be active or the automatic unbalanced load detection system might be a
49. s are appropriate before calling the Authorized Service Agent If they are not calla qualified technician and plumber to have any necessary arrangements carried out Preparation of the location and electrical tap water and waste water installations at the place of installation is under customer s responsibility ZA Installation and electrical connections of the product must be carried out by the Authorized Service Agent Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons Prior to installation visually check if the product has any defects on it If so do not have it installed Damaged products cause risks for your safety i Make sure that the water inlet and discharge hoses as well as the power cable are not folded pinched or crushed while pushing the product into its place after installation or cleaning procedures Appropriate installation location e Place the machine on a rigid floor Do not place it on a long pile rug or similar surfaces e Total weight of the washing machine and the dryer with full load when they are placed on top of each other reaches to approx 180 kilograms Place the product on a solid and flat floor that has sufficient load carrying capacity e Do not place the product on the power cable e Do not install the product at places where temperature may fall below O C e Place the product at least 1 cm away from the edges of othe
50. selected no cancelling Energy Label programme EN 60456 Ed 3 kkk up to the maximum spin speed See the programme description for maximum load i The auxiliary functions in the table may vary according to the model of your machine Bn SISISIS Max Speed o CO o B alo BIB olo ojo o e R dala amp m m m g8ioeioo ojojo 200 Auxiliary functions AHI E PPP fete fe fermen LLLLELLLELELEELLLLL fff shorter ess EEEE T EE T Tff anser LLLLELLLEELEEDELLELL Er ant casno Selectable temperature range C a ES CS ERES ESSE SS AMENER PL TT EP ELE EL nnn TTT gelese Pet hair removal If maximum spin speed of the machine is lower then this value you can only select i Water and power consumption may vary subject to the changes in water pressure water hardness and temperature ambient temperature type and amount of laundry selection of auxiliary functions and spin speed and changes in electric voltage i You can see the washing time of the programme you have selected on the display of the machine It is normal that small differences may occur between the time shown on the display and the real washing time 22 EN Auxiliary function selection Select the desired auxiliary functions before starting the programme Furthermore you may also select or cancel auxiliary functions that are suitable to the running programme by pressing the Start Pause Cancel butt
51. t use metal tipped tools to remove the cover 3 Some of our products have emergency draining hose and some does not have Follow the steps below to discharge the water Discharging the water when the product has an emergency draining hose 28 EN while installing it into its housing Seat the filter into its place completely Otherwise water may leak from the filter cap 6 If the filter cap is composed of two pieces close the filter cap by pressing on the tab If it is one piece seat the tabs in the lower part into their places first and then press the a Pull the emergency draining hose out upper part to close from its seat b Place a large container at the end of the hose Drain the water into the container by pulling out the plug at the end of the hose When the container is full block the inlet of the hose by replacing the plug After the container is emptied repeat the above procedure to drain the water in the machine completely c When draining of water is finished close the end by the plug again and fix the hose in its place d Turn the pump filter to take it out Discharging the water when the product does not have an emergency draining hose a Place a large container in front of the filter to catch water from the filter b Loosen pump filter anticlockwise until water starts to flow Fill the flowing water into the container you have placed in front of the filter Always keep a piece of cloth
52. t drawer Remove any powder residue buildup in the drawer To do this 1 You can remove the detergent drawer by pulling it towards yourself strongly If more than a normal amount of softener and liquid detergent mixture starts to remain in the softener compartment the siphon must be cleaned 2 Wash the drawer and the siphon with plenty of lukewarm water in a washbasin Wear protective gloves or use an appropriate brush to avoid touching the residues in the drawer when cleaning Replace the drawer into its housing after cleaning Check if the siphon is in its original location Cleaning the loading door and the drum Residues of softener detergent and dirt may accumulate in your machine in time and may cause unpleasant odours and washing complaints To avoid this use the Drum Cleaning programme If your machine is not featured with Drum Cleaning programme use Cottons 90 27 programme and select Additional Water or Extra Rinse auxiliary functions as well Before starting the programme put max 100 g of powder anti limescale into the main wash detergent compartment compartment nr Il If the anti limescale is in tablet form put only one tablet into compartment nr Il Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end i Repeat Drum Cleaning process in every 2 months i Use an anti limescale suitable for the washing machines After every washing make sure that
53. t visible on the pin face of the plug Fuse covers are available from any good electrical store Important Fitting a different plug As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug proceed as follows 1 Connect the green yellow or green earth wire to the terminal in the plug marked E or with the symbol f or coloured green and yellow or green Connect the blue neutral wire to the terminal in the plug marked N or coloured black 3 Connect the brown live wire to the terminal in the plug marked L or coloured red With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box If in doubt contact a qualified electrician N Green and yellow or green Brown or black red First use Before starting to use the product make sure that all preparations are made in accordance with the instructions in sections Important safety instructions and Installation To prepare the product for washing laundry perform first operation in Drum Cleaning programme If your machine is not featured with Drum Cleaning programme use Cottons 90 programme and select Additional Water or Extra Rinse auxiliary functions as well Before starting the programme put max 100 g of powder anti limescale into the main wash detergent compartment compartment nr Il
54. tand level and balanced on its feet Balance the machine by adjusting the feet Otherwise the product may move from its place and cause crushing and vibration problems 10 1 Loosen the lock nuts on the feet by hand 2 Adjust the feet until the product stands level and balanced 3 Tighten all lock nuts again by hand ce Do not use any tools to loosen the lock nuts Otherwise they will get damaged Raising the appliance In order to raise the appliance to eliminate the gap below the worktop you will need to order special optional kit Please call Beko Spare Part Department 0845 6004911 and see built in installation section Without optional With optional raising Fre raising feet feet Minimum o height 55 mm max Service Ref No 1493 height 65mm EN Electrical connection Connect the product to a grounded outlet protected by a fuse complying with the values in the Technical specifications table Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations e Connection must comply with national regulations e Power cable plug must be within easy reach after installation e The voltage and allowed fuse or breaker protection are specified in the Technical specifications section If the current value of the fuse or breaker in the house is less than 13 Amps have a qualified e
55. th detergent Wash and clean the dispenser with hot water e Regular drum cleaning is not applied gt gt gt Clean the drum regularly For this please see Cleaning the loading door and the drum Excessive laundry was loaded in gt gt gt Do not load the machine in excess Wrong programme and temperature were selected gt gt gt Select the proper programme and temperature for the laundry to be washed d een was used gt gt gt Select the proper detergent for the laundry to be washed e Regular drum cleaning is not applied gt gt gt Clean the drum regularly For this please see Cleaning the loading door and the drum e Improper detergents for the washing machine are being used gt gt gt Use detergents appropriate for the washing machine e Excessive amount of detergent is used gt gt gt Use only sufficient amount of detergent e Detergent was stored under improper conditions gt gt gt Store detergent in a closed and dry location Do not store in excessively hot places e Some meshed laundry such as tulle may foam too much because of their texture gt gt gt Use smaller amounts of detergent for this type of item e Detergent is put in the wrong compartment gt gt gt Put the detergent in the correct compartment e Softener is being taken early gt gt gt There may be problem in the valves or in the detergent dispenser Call the Authorized Service Agent e Regular drum cleaning is not applied gt
56. wder and iquid detergents recommended for colours can be used at dosages recommended for heavily soiled clothes t is recommended O use powder detergents to clean and soil stains he stains that are sensitive to bleaches Use detergents without bleach Powder and iquid detergents recommended for recommended for whites can be used at dosages recommended for normally soiled clothes Powder and liquid detergents colours can be used at dosages recommended for normally soiled clothes Use detergents without bleach Powder and liquid detergents recommended for recommended for whites can be used at dosages recommended for lightly soiled clothes colours can be used at dosages recommended for lightly soiled clothes Use detergents without bleach Colors Dark colors Recommended temperature range based on soiling level cold 40C Liquid detergents suitable for colours and dark colours can be used at dosages recommended for heavily soiled clothes Liquid detergents suitable for colours and dark colours can be used at dosages recommended for normally soiled clothes Liquid detergents suitable for colours and dark colours can be used at dosages recommended for lightly soiled clothes Delicates Woolens Silks Recommended temperature range based on soiling level cold 30C Prefer liquid detergents produced for delicate clothes Wooll
57. yed start countdown starts Delayed Start symbol illuminates Steadily Start symbol appears sign in the middle of the delayed start time on the display starts flashing i Additional laundry may be loaded during the delayed start period At the end of the countdown Delayed Start symbol disappears washing cycle starts and the time of the selected programme appears on the display Changing the delayed start period If you want to change the time during countdown 1 Press Start Pause Cancel button sign in the middle of the delayed start time on the display stops flashing Pause symbol appears Delayed Start symbol flashes Start symbol disappears 2 Setthe desired delayed start time by pressing the Delayed Start or buttons 3 Press Start Pause Cancel button Delayed Start symbol illuminates steadily Pause symbol disappears Start symbol appears 4 sign in the middle of the delayed start time on the display starts flashing Cancelling the Delayed Start function If you want to cancel the delayed start countdown and start the programme immediately 1 Press Start Pause Cancel button sign in the middle of the delayed start time on the display stops flashing 2 Start symbol disappears Pause symbol and Delayed Start symbol flashes 3 Decrease the delayed start time by pressing the Delayed Start button Programme duration appears after 30 minutes 4 P
Download Pdf Manuals
Related Search