Artemis - QuickStart
Contents
1. Software preparation prior to use by the diver Power on Artemis and check the required status icons go green If the Sonar is to be used check the Sonar status icon on the Artemis Display status bar is visible and white red indicates no Sonar connected yellow indicates invalid data If the GPS Float is to be used check the GPS status icon on the Artemis Display status bar is visible and green red indicates no GPS connected yellow no GPS fix determined The Immersion Sensor droplet icon is red when Artemis is not submerged When submerged dive logging starts automatically the disk icon goes green If no droplet icon is shown the immersion sensor is not enabled or fitted so manually start dive logging if required from the Settings app Horizontal Beam 3 horizontal USING THE SONAR USING APPLICATIONS Application Key Functions F1 Up Power Off Selection Settings 3 Switch Application Power Sonar Navigation Zero Depth Sensor Dive Profile SUBSEA TECHNOLOGY beam width Target Beam Target Select the Sonar app visible lt n E oscillates aot s en E side to side Gv lt a VF Vertical Beam a Hold Artemis horizontal and stationary C a gt a 4 A while to Sonar performs a full scan on lt gt a EA BEE meaig pay 9 E IG hoe The Sonar will only display objects in its acoustic field of vision Targets cast2. w g J Sonar QUICK START 4 528 aL AND REFERENCE Ba Gee a Bege gos BEFORE YOU START f x Immersion Sensor Navigation D FEATU RES ARTEMIS e Application Icons ee Power ae A Press Settings Dive Profile Check that the Artemis system contains the Icon colour following items Vi Green Normal operation Artemis Console and Sonar option Yellow Warning Artemis GPS float option Red Error Alarm e Rechargeable NiMH battery pack 16 8V 2 2Ah e Battery charger Universal AC supply 3 stage Keypad Power On Connectors charging F1 Up App F4 Right USB connection lead D D Display amp Keypad Battery Housing Cap USB and Serial port blanking plugs 1 of each rane Blanking Plugs Artemis Manager software CD for Microsoft Windows User documentation Transit case Battery Housing D Analogue Compass Module Y 4 Battery Pack 8 Sonar Module F2 Down F3 Left hi Before using the Artemis system for the first time please read the full User Manual as this bab aa important safety and operational BATTERY CHARGING ira refer ao full list of safety notices care and storage guidelines A in the user guide ii FITTING amp CARE A Use only the supplied Artemis charger with the Artemis NiMH battery packs Do not rely on this product or its sensors as a To fit or remove the battery pack Do not allow the charger or
3. 183 307900 s Target Marker 4254 XW Fax 31 183 307910 Sleeuwijk Email info seascape nl Diver Placed Marker The Netherlands www seascape nl REVIEWING DIVE LOGS To download recorded Dive Log data or upload new Mission files onto Artemis Plug the USB lead into the USB connector at the base of the console and connect the other end of the lead into a free USB socket on a PC Laptop that has the Artemis Manager software installed Turn Artemis on and after a few seconds the Windows operating system should detect Artemis and appear as a Mass Storage Device similar to a USB pen drive Use the Windows File Explorer or other file manager to download and remove any Dive Log files To prevent corruption to any of the files always follow the Windows Safely Remove Hardware amp Eject Media procedure before disconnecting the USB cable or powering down Artemis Artemis Manager Icons grt Play Log Data Pan Chart gt i ns Measure Distance Bearing Open Dive Log Pause Playback KAG x Export Log Data to other programs Restart Playback Zoom To Rectangle Repeat Playback Zoom To All Markers Q
4. acoustic shadows than can obscure other targets behind them Because of this only the leading edges of targets are shown on the display Vertically aligned targets produce the same echo and will appear as a combined target on the display Target not seen Target Ray not seen Le gt 90 scan Target Echoes amp Shadows amp 4 Echos received fromytarget front Ww edges Yy Sonar Display Shows echo intensity received from target edges visible 35 vertical ae beam width Target not seen Echos received from target fronti a edges A E fi i Acoustic sh adow behind first target hides second target Vertically aligned targets appear as a Single echo on the display Mark Target Next Target Display Mode Interactive Navigation Icons found on the Status Bar lt lt qj Target more than p i i 90 to left right F2 Down O Toggle Port 1 Power F3 Left Q Toggle Port 2 Power F4 Right Toggle Port 3 Power Target more than 60 to left right lt a lt gt gt Target more than Next Value 30 to left right Execute Prev Value Execute Selection Down lt i gt Target within 30 Align dot in center of display Gain Down Gain Up ol lt _ s gt Navigation Markers Icons found on the Navigation App display 4 Waypoint De Hoogjens 22 Tel 31
5. battery pack to be exposed to water primary means of life support during or after a Charge batteries in a well ventilated location where ambient temperature is dive Artemis is designed as a Survey tool and between 10 C and 30 C not as an alternative or replacement for dive Avoid repeatedly re charging the battery without allowing for a minimum 30 computers or similar apparatus minute cooling period between charge cycles Do not submerge the console unless all blanking plugs are fitted in unused electrical connector sockets and the battery housing cap is secured Do not use this product if any of the cabling or housings of its component parts appear to be damaged or compromised for the ingress of water where required to be watertight When storing batteries When not in use batteries should be disconnected from the charger and stored in a fully charged state Do not leave battery packs in the Artemis battery housing for long periods of storage The chemistry of the nickel metal hydride battery pack will self discharge approximately 1 of its charged capacity per day When storing batteries for more than one year charge at least once a year to prevent leakage and deterioration of performance due to self discharging you should Remove any weed or other detritus that may have been collected during its operation Wash the system in fresh water if it has been used in salt water to prevent corro
6. sion and Q When you have finished using your Artemis system damage to rubber mouldings To charge the battery pack Store in a well ventilated enclosure after use to With the charger turned off plug the charging lead into the socket at the E vel Neat TREE allow any moisture on system components to end of the battery pack ki va ice ea ii evaporate naturally Charging can take up to 7 hours during which time the battery may oa ee elon aa ene a RE f Green Trickle Charge Complete The charger status indicator colour shows current mode completion or Orange Green Error slow flash error P N BP00698 3 Copyright 2015 www blueprintsubsea com UM 141 P00698 03 PRE DIVE CHECKLIST With Artemis connected to a PC Check that any required mission files have been uploaded onto Artemis Check that Mission files to be used have enough free marker slots to allow the diver to define any in mission markers if required Check there is enough free space on the internal storage for the Dive Log file allow approximately 2Mb of storage space per minute of the dive Hardware preparation Check a fully charged battery been fitted and the housing cap is tight and sealed correctly Check that blanking plugs have been fitted into all unused connector sockets preventing water ingress If the GPS Float is used check its tether is securely attached to the Artemis frame avoiding strain on the connector
Download Pdf Manuals
Related Search