Bathroom / Portable Flip Heater
Contents
1. ANTY CUSTOMER SERVICE IS NEEDED Contact the manufacturer by calling customer service department at 1 877 891 7333 EnergyWise Solutions LLC PO Box 4681 Logan UT 84323 Make sure you have your warratnty your sales receipt location of purchase and the model serial number of your product2. Bathroom Portable Flip Heater Model EWS 800H W User Manual Portable Bathroom Wall Mounted Please read user manual before use A Product Illustration Air outlet Air inlet Thermostat and Switch ey P Foot Photo Indication o N p p Alarm light Filter Lower bracket Upper bracket gt ey E E WARNING Make sure to plug the Flip Heater into a standard 120V 60HZ outlet If the plug wire or the Product itself is damaged do not use the Product It must be repaired through our warranty center You can reach the warranty center at 877 891 7333 Electrical products are not to be used by persons including children with physical sensory or mental impairments or with lack of experience and knowledge unless they are supervised or instructed by persons in charge of safety Adults should instruct children not to play with electrical appliances This heater should not be operated without monitoring Do not allow children to use this heater or treat it as a toy This heater must be kept out of the reach of children This heater is for indoor use only Do not use it outdoor 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 21 28 29 30 Do not use this heater in closed environment To avoid overheating do not cover the appliance Do not leave any object or cover on the appliance while it is on and after off This heat
3. The switches and thermostat cannot be touched by person in the bath or shower 4 When you choose the location on a wall to install the Product first ensure there are not hidden pipes and electric wires If you are not sure about the wall s structure or do not understand how to install the Product please find a professional technician to install for you 5 If you do not use the Flip Heater for a long time uninstall the Flip Heater and keep it in a dry place Do not keep the Flip Heater inside bath room if you do not use it for long period Wall Mounting Installation l Paste the 1 1 Hanging template on the selected position Make sure to level the temple when you paste the template to the wall 2 Drill four holes with respect to the distances as in picture 5 3 Insert provided nogs into the four holes 4 Fix the upper and lower brackets as shown in picture 6 5 Hang the Flip Heater to the upper bracket and fix it to the lower one until you hear a click as indicated in picture 7 Portable Use 1 The Product can be used inside bathroom BUT IT MUST BE POSITIONED 36 INCHES AWAY FROM THE BATHTUB SHOWER WASH BASIN OR OTHER WATER OUTLET 2 Pull the stand on the back of the Flip Heater as indicated in picture Pull it out until its locked Operation The Product is provided with a switch and a thermostat as indicated in picture 9 Switch Flip Heater Use 0 The switch allows you to select different operating mo
4. ce there is a risk of fire if the appliance is covered or incorrectly positioned Do not pull or damage the power cord If the product does not work properly immediately turn it off and disconnect it from the mains socket The Flip Heater has a double IP protection it has IPX1 when it is used as mobile and it has IPX4 in wall mounted position Pic2 The product must be at least 40 inches far from inflammable objects No objects should be placed nearer than 24 inches from the outlet vent Make sure you completely know how to operate this Product and understand all the warnings safety matters and other details before use All pictures are for reference only Wall Mount Installation Notice In wall mounted position the Flip Heater has the higher protection level of IP24 It can be used in bathrooms and damp places but IT CANNOT BE INSTALLED WITHIN THE PERIMETER OF THE BATHTUB OR SHOWER VOLUME 1 or closer than 24 inches to the bathtub VOLUME 2 as showed in picture 3 Please notice that the Product cannot be installed within gray area If your bathroom cannot meet this installation requirement please do not install inside the bathroom to avoid accident Allow at least 24 inches from the Product to ceiling at the wall mounted position 7 inces above the floor and 7 inches away from sides If your bathroom cannot meet this installation requirement please do not install inside the bathroom in order to maintain safety standards 3
5. dalities off O cold air Ventilation warm air 750W and hot hair 1500W eo The Product is equipped with a warning light picture 10 that turns red in case of overheating or malfunctioning The warning light will not turn on during normal use eo Do not lean anything against the Product in order to avoid overheating malfunctioning either in mobile position or in wall mounted position Thermostat Use In a room that is hotter than 86 degrees Fahrenheit it is normal that the thermostat will keep the Product from turning on Vice versa in a very cold room 25 degrees Fahrenheitit is regular that the Product will run continuously even if at its minimum In order to adjust the thermostat we advise you to o Place the thermostat on highest temperature and let the Flip Heater reach a toasty temperature O Turn the knob in anti clockwise direction until you hear a click and the Flip Heater will turn off O Turn the knob just a bit in clockwise direction o In this position the thermostat holds the temperature you have chosen Filter Your Product is equipped with a filter in order to protect the heating element from dust and dirt Before cleaning the appliance disconnect it from the mains socket and wait for it to cool down The filter is removable to be easily cleaned with water To remove the filter push the tab and pull as indicated in picture 12 We advise you to clean the filter every 6 months don not throw the filt
6. er away remember to reassemble it on the Flip Heater after cleaning operation Safety measure For avoiding risks and damages caused by overheating for example a partial or complete obstruction of air flow the Product is equipped with a safety device that stops the operation In this event unplug the appliance from the outlet wait for 30 minutes let the Flip Heater cool down and remove the object that obstruct air flow Now it is possible to turn the Product on as depicted above If the problem continues please contact the warranty center How to use 1 Please make sure the switch is positioned at Off O 2 Connect the power cord to electric socket 3 Select the switch to cold air Ventilation warm air 750W or hot hair 1500W 4 Turn the thermostat to Max the Flip Heater start running 5 After use turn the switch to Off O the Flip Heater stopped Maintenance 1 Before cleaning switch off the heater and unplug from the outlet 2 Wait until the Product cools down 3 Use a soft towel to clean the cover Or use a vacuum cleaner to clean the dust off the surface 4 Never splash any liquid into the Flip Heater Product Specification Model EWS 800H W Voltage 120V Frequency 60 Hz Power 1500W Protection level Mobile IP21 Wall Mount IP24 Size 282 L x 83 W x 400 H mm Accessories Upper Lower bracket x 1 Nogs x 4 Screw x 4 Hanging template x 1 Customer Service IF WARR
7. er cannot used to dry clothes Do not splash any liquid into the heater Always place the heater on a flat and even surface When the heater is lying on a side turn it off immediately The Flip Heater must be positioned vertically in relation to the floor Never use this device near curtains inflammable material furniture etc Do not use flip heater in rooms with explosive gas or inflammable solvents varnishes glues Do not place the appliance near inflammable substances at least 90cm away from the heater To prevent potential risks of fire never use the appliance on soft surfaces such as beds where openings can be obstructed When the appliance is not used and before any maintenance operations disconnect the plug from the mains socket In order to install correctly the heater refer carefully WALL MOUNTING and MOBILE USE paragraphs The power cord must never be in contact with the hot surfaces of the Flip Heater Do not place the appliance directly below a power socket Do not lay the power cord under a carpet Do not cover the power cord with a cover or similar elements Pay attention not to place the power cable where it is likely to get into people s way Never insert external objects in the ventilation and air intakes as this could cause risk of fire electric shock or damage to the appliance Never use the appliance with a programmer timer or any other similar device that switches on the heating appliance automatically sin
Download Pdf Manuals
Related Search