Francis Francis for illy Y5 Milk, Espresso and Coffee Machine
Contents
1. PREPARE MILK DRINKS Ensure milk kit components are Insert milk kit dispensing spout Fill the milk tank to the max line Make sure milk tube is pushed through properly assembled Refer to firmly into the hole on left side 16 9 oz with cold milk the opening by aligning the rubber tube s instruction manual and video link of the machine tab flush to the inside of the milk lid see illy com Y5milkoperatingtips step 3 on reverse side Check milk tube mouth is protruding on outside of lid Place lid on top of the milk tank Attach milk tank to machine by Place an iperEspresso capsule You can easily prepare milk pushing the exposed tube into into the capsule holder by lifting based beverages by selecting the black spout on machine to the lever Close the lever by cappuccino g latte firmly attach pushing down completely macchiato or g steamed milk until tightly closed Place your cup in the appropriate tray Y5 MILK CLEANING AND MAINTENANCE Remove the milk tank lid and Wash the milk tube with empty its contents Remove hot water milk tube by holding the tab and rotating it Wash the milk of the lid tank lid with hot water Insert milk tube in the lid first Then align and connect the tube s tab flush to the inside Remove the milk kit components Empty any water or residue out of the transparent tube by gently pressing Remove the milk kit dispensing spout Remove the final connector Remov2. Francis Francis for illy Y5 Milk Espresso and Coffee Machine QUICK START GUIDE UL PREPARE MACHINE FOR USE Step 1 Pre wash water and milk tanks with soap and hot water then rinse and dry Step 2 Fill water tank to max line 33 oz Step 3 Push water tank into machine completely Step 4 Turn machine power switch on Wait until LED cup icons no longer flash on top of machine Machine will be ready in less than one minute Step 5 Place a large mug on tray and press the water icon W without any capsules in the machine Repeat this process until water tank is empty then refill to max line Filtered water is recommended Step 6 Repeat step 5 by placing a mug on the tray and filling the milk tank with water and pressing the milk icon T to flush all the water out of milk tank This will pre clean the milk function prior to preparing beverages BREW COFFEE OR ESPRESSO Step 1 Place an iperEspresso espresso or coffee capsule into the capsule holder by lifting the lever Step 2 Close the lever by pushing down completely until tightly closed Step 3 Place your cup or mug in the appropriate tray Step 4 Select your beverage by touching the small cup for ESPRESSO or Mug for COFFEE icon Serve immediately Machine is pre set to automatically shut off after approximately 18 seconds If you want to change this automatic setting consult your user s manual espresso capsules coffee capsules FUR REEE EK Qaa
3. by connecting and locking into place SOLUTION Use cold whole milk Make sure milk tube mouth is protruding on outside of lid and that it is locked securely into milk kit Wash the milk dispensing spout and milk kit components to ensure no dried milk is inside blocking the flow Double check upper clear tube is not clogged Fill the milk tank up to at least the MIN level Disassemble the milk kit remove the upper tube and thoroughly clean it as described above Learn more here illy com Y5milkoperatingtips Make sure the tank is fully and securely inserted Descale the machine as described in the descaling section of the manual Dispense water with no capsule in the compartment by pressing the water icon Make sure that the water tank is completely inserted Make sure that all the milk kit components have been correctly assembled and inserted We suggest to dispense hot water into a container and immerse milk kit components to avoid milk solidifying and clogging the tubes You may also add Rinza a special cleaning agent to hot water and safely soak the milk kit components for 30 minutes Daily and after a descaling cycle Machine Concierge Service 877 854 4141 Hours of operation Mon Fri 9 am 7 pm Sat Sun 11 am 6 pm beginning 8 22 2015 or visit illy com Y5milkoperatingtips 50246 8 15
4. e the end that must To ensure correct milk frothing be inserted in the machine always check that the micro hole inside the upper tube is not clogged all components with hot water TROUBLE SHOOTING PROBLEM The machine does not 1 Milk type not suitable for this dispense frothed milk preparation CAUSE 2 Milk tube is not positioned correctly in milk tank lid or not securely attached to milk kit 5 Milk kit components dirty or clogged by milk from previous use 4 Not enough milk in the tank 5 The milk kit upper tube is clogged The machine does not brew coffee or espresso Water tank not inserted correctly Lime scale on internal components Failure to start the pump Water leak The water tank is not correctly and or not completely inserted The milk kit is not correctly and or not completely inserted Cleaning of the machine 1 The cleaning procedure is too long complicated Are there other suggested cleaning methods for milk kit components 2 How often should milk kit components be cleaned Dry all components and insert them into the milk kit Remove the upper pipe Wash dispensing spout Fill the milk tank with hot water Attach the milk kit to the and rinse for fast cleaning Or to machine until it locks in place complete a full cleaning cycle see step 2 on reverse side Then fill milk tank with water and press attach the milk tank to the milk the milk J icon kit
Download Pdf Manuals
Related Search