Home

CONGRATULATIONS

1. Operating temperature 0 C 45 C Note Radio pollution comparison Mobile phone average radio signal 1 W aXbo radio signal 0 0001 W Signal duration 0 01 secs per movement sequence For an average of 500 movements sequences per night this results in an overall signal duration of only 5 seconds per night Any rights to changes to the product for reasons of product development are reserved 23 6 6 Error correction Error Soft alarm sound doesn t sound no ideal wake up Did you wear the wristband Is your sensor activated Solution Press the push button on your wristband shortly the display light should come on if this is not the case activate the sensor by pressing the push button on the wristband for 5 seconds at least One of the rare days when your ideal wake up point could not be established During battery operation f the display shows LOW BAT CHARGE optimum wake up is not possible as the battery level is too low Error The display does not show any movements s your sensor activated Solution Press push shortly on your wristband the display light should come on f not activate your sensor by pressing push continually for 5 seconds at least During battery operation Check if your wake up time is within the next 12 hours Check if the display shows LOW BAT CHARGE If yes plug in the adapter Is the key lock activated Unlock the keys by pressing back home t
2. On the alarm clock back button scroll scroll wheel click scroll wheel home button On the wristband push button The following actions can be carried out by the individual control elements The back button gt leads one step back in the current menu If the selection has not been confirmed by pressing OK the current settings are not saved gt stops the alarm sound for person 1 gt stops the slumber sound gt special function quick set activation and settings alarm for person 1 The scroll wheel scroll function gt navigates through the menu gt sets times gt selects sounds gt selects volumes 26 The click on scroll wheel click function gt confirms the selection gt stops the alarm sound gt stops the slumber sound The home button gt leads back to standby mode If the selection was not confirmed by pressing OK the current settings are not saved gt stops the alarm sound for person 2 gt stops the slumber sound gt special function quick set activation and settings alarm for person 2 The push button on the wristband gt briefly activates the display light and shows the alarm time gt activates or deactivates the sensor i e on travel gt stops the alarm sound of the person concerned 27 7 Short manual Lock keys back home for 2 seconds Unlock keys back home for 2 seconds Set time scroll to TIME S
3. S P A C SleepPhaseAlarmClock references to the patented technology used in aXbo axbo all artworks and the product design are legaly protected The technology used by aXbo is patented Producer aXbo Limited 12 13 Ship Street Brighton BN1 1AD UNITED KINGDOM EN BA 13 04 V5 axbo com Instruction manual aXbo SleepPhaseAlarmClock CONGRATULATIONS on buying aXbo the world s first SleepPhaseAlarmClock n D o D 5 5 Oo YY Y N NY 2 ani Alarm for person 1 Alarm for person 2 Time Menue display Power supply Movements person 2 Movements person 1 Battery charching level Time format back button a click amp scroll button home button 3 Power connector push button sensor Contents Control elements page 3 1 How does aXbo work page 5 1 1 Technology page 5 1 2 Human sleep page 5 2 First steps page 6 2 1 Activate aXbo SleepPhaseAlarmClock page 6 2 2 Activate sensor page 6 2 3 Registration page 7 3 Settings page 8 3 1 Set time TIME SET page 8 3 2 Set alarm ALARM page 8 3 3 Alarm sounds SOUNDS page 10 3 4 PowerNap and further features page 11 3 5 Chillout sounds CHILLOUT page 12 3 6 Travel function page 13 3 7 Display light page 14 3 8 Data transfer page 15 3 9 Reset page 15 4 Batteries amp mains adapter page 15 5 Quick set by one click page 17 6 Appendix Scope of deliv
4. It is essential to use the optimum wake up moment chosen by aXbo and get up straight away in order to feel fresh and ready to go Important note aXbo offers an intelligent snooze function coming with a feature upgrade Please find further informations on our webpage 3 3 Alarm sounds SOUNDS To create your own personal wake up experience you can choose between six different alarm sounds Set alarm sound and volume for person 1 person 2 gt gt scroll to menu P1 SET P2 SET gt click confirm gt gt scroll to menu SOUNDS gt click confirm You are now in menu SD A SET Sound Alarm Set gt gt scroll choose alarm sound gt click confirm 10 Your chosen alarm sound for person 1 person 2 has now been set aXbo will automatically jump to menu SD V SET Sound Volume Set gt gt scroll to select the right volume for your alarm sound gt click confirm For person 1 aXbo will jump automatically to the menu P2 SET If you do not wish to continue with further settings press the home button to get back to standby mode For person 2 aXbo will automatically return to standby mode Note We recommend choosing different alarm sounds for person 1 and person 2 The alarm sounds become gradually louder the volume increases every two seconds until it has reached the maximum volume preset by the user 3 4 PowerNap and further features A PowerNap is a short rela
5. the wristband firmly and continuously for 5 seconds The display will show whether the sensor was deactivated for person 1 or person 2 SENSOR 1 OFF SENSOR 2 OFF Note To check if the sensor has been successfully deactivated press push on the wristband if the display light comes on for a short time the sensor is still active Important note Once sensors are deactivated you will not be woken at your ideal wake up time 2 Key lock By activating the key lock the communication between aXbo and sensor is interrupted It is the refore essential to deactivate the sensors first gt gt Press back and home together for 2 seconds The display now reads AXBO or rather the Firmware version number If you press any key on the alarm now the display will always show HOLD BACK HOME to indicate how the keys can be unlocked again Once arrived at your destination please 3 Unlock keys gt gt Press back and home together for 2 seconds 4 Activate sensor s gt gt Press push button on the wristband firmly and continuously for 5 seconds The display will show whether the sensor was deactivated for person 1 or person 2 SENSOR 1 ON or SENSOR 2 ON Note To check if the sensor has been successfully deactivated press push on the wristband if the display light comes on for a short time the sensor is now active 3 7 Display light Once you are asleep the disp
6. ET gt click gt scroll hours gt click gt scroll minutes gt click gt scroll to 24h format F 24 SET or AM PM format F AM SET gt click Set alarm and sound for person 1 person 2 scroll to P1 SET P2 SET gt click gt click gt click gt scroll hours gt click gt scroll minutes gt click gt home back to standby mode Deactivate alarm ROFF amp 20FF scroll to P1 SET P2 SET gt click gt click gt scroll to s amp 8OFF 820FF gt click Stop alarm sound Press push button on the wristband or any other button on the alarm clock Select CHILLOUT slumber sound click gt scroll to select sound 1 3 gt click gt scroll volume gt click Slumber sound will stop automatically once you have fallen asleep Stop slumber sound press any button on the alarm clock Quick set one click Person 1 Activate deactivate alarm Press back button in standby mode continually for 2 seconds Set alarm person 1 Press back button in standby mode once briefly scroll hours gt click gt scroll minutes gt click Person 2 Activate deactivate alarm Press home button in standby mode continually for 2 seconds Set alarm person 2 Press home button in standby mode once briefly scroll hours gt click gt scroll minutes gt click 28 8 Warranty The producer undertakes the following warranty for the
7. aXbo SleepPhaseAlarmClock referred to hereafter as product The producer guarantees only that the product is free from any faults with respect to material and production within the legal warranty period from the date of delivery Should such a fault occur with the legal warranty period and the producer be called upon to accept guarantee the producer undertakes at their discretion gt gt to repair the product with new or recycled parts free of charge or gt gt to exchange the product with a product which is either new or assembled from fully functio ning used parts and the function of which conforms at least to the original product or gt gt reimburse the purchaser the complete purchase price The producer having the right to choose the remedy and number of trials themselves Please keep your dated purchase receipt and the original packaging as any warranty is sub ject to presentation of your receipt Exclusions and restrictions These warranty regulations are only valid for parts produced by the producer They do not include software even if this was packaged or sold together with aXbo products Please check in such cases if any guarantees or warranties were given by other producers or suppliers Software sold through the producer is subject to the rules of the software licensing agreement Further infor mation on the software licensing contract is available under software axbo com 29 The producer shall not be held l
8. als up to 12 hours before the set alarm time when it is running on battery In the remaining period it will not register any movements or show them on the display Important note If the display shows LOW BAT and CHARGE please plug in the adapter cable immediately to recharge the batteries and ensure full function As long as LOW BAT and CHARGE are shown on the display light and sleepphase alarm are deactivated You will then be woken only once again at the last possible time in the same way as by a conventional alarm clock Latest after 24 hours in the LOW BAT CHARGE mode aXbo deactivates any feature and switches off the dis play Any settings are still available Plug in operation aXbo comes optional with an adapter and uses an intelligent recharge system Batteries will be only charged once a certain low level has been reached Should you need the batteries fully charged e g on travel just pull out the plug and plug it in again this will start a complete charging cycle Manual charging of batteries Any time you plug in the cable adapter the batteries are recharged As aXbo uses an intelligent charging system batteries are also recharged during continuous plug in operation once a certain ow battery level has been reached Power cable n case of purchasing an aXbo with a pure power cable to operate your aXbo or if you lost your adapter you can use any USB adapter from a mobile e g with an output of 0 2A at least Po
9. croll set minutes gt click confirm Wake up time for person 1 person 2 is now activated OK will show that all settings have been accepted aXbo jumps to the menu sounds By pressing the home button you can always return to the standby mode where the wake up time for person 1 person 2 is displayed Note If both persons have activated an alarm the corresponding alarm times will only show if person 1 or 2 moves or presses the push button on the wristband Deactivate alarm for person 1 person 2 Don t forget to deactivate the alarm if you do not wish to be woken gt gt scroll to menu P1 SET P2 SET gt click confirm gt gt scroll to menu ALARM gt click confirm gt gt scroll to 1 amp OFF 2 OFF gt click confirm The alarm for person 1 person 2 has now been deactivated aXbo will return to standby mode See also Quick set p 17 Person 1 gt gt Press back button in standby mode for 2 seconds Person 2 gt gt Press home button in standby mode for 2 seconds Stop alarm sound gt gt Press any button on the alarm clock or gt gt Press push button on your wristband If the alarm is not deactivated the wake up sound will continue for a period of time preset by the user before changing into a sharp alarm tone for a further 5 minutes Each person can choose an individual alarm sound Special assignment of keys by using special features Note
10. de of your non dominant arm i e the left arm for right handed persons and vice versa The wristband comes optional in two different sizes see chapter 6 3 p 22 2 3 Registration Don t forget to register your aXbo on our website software axbo com In case of purchasing an aXbo including an USB data cable you can download the aXbo research software in order to analyse your recorded data Furthermore you can download new features 3 Settings 3 1 Set time TIME SET gt gt scroll to menu TIME SET gt click confirm gt gt scroll set hours gt click confirm gt gt scroll set minutes gt click confirm gt gt scroll to choose between formats F 24 SET 24h or F AM SET AM PM format gt click confirm The date is set in the same way Day Month Year Time and date have been set The display will show OK to confirm that all settings have been made aXbo will automatically jump to standby mode 3 2 Alarm settings ALARM Set alarm for person 1 person 2 gt gt scroll to menu P1 SET P2 SET gt click confirm gt gt scroll to menu ALARM gt click confirm You are now in menu AL 1 SET Alarm Person1 Set AL 2 SET Alarm Person2 Set gt gt scroll to wake up time 218 d2o gt click confirm You are now in menu AL T SET Alarm Time Set Please set your latest wake up time now gt gt scroll set hours gt click confirm gt gt s
11. ery Technical data Error correction page 18 7 Short manual page 28 8 Warranty page 29 Index page 32 1 How does aXbo work We all know the great feeling of waking up in our own time refreshed and ready to go This is why we developed the alarm clock of the future which will wake you every day at your optimum sleep phase 1 1 Technology Your body movements during sleep are monitored through the wristband and sent computing these movements aXbo calculates your personal ideal wake up time wi o aXbo By hin a time range of 30 minutes prior to the alarm time set aXbo can wake two persons quite separately and both at their individual optimum time Should you forget to put on the wristband aXbo will wake you like a conventional al the exact set wake up time 1 2 Human sleep arm clock at Every person goes through a number of sleep cycles every night Ideally 4 to 5 of these cycles should be passed through Each cycle takes about 90 minutes during which the phases of deep sleep light sleep and REM sleep follow each other lt lt RELAXED AWAKE STATE gt gt FALLING ASLEEP 3 MUSCEl WINCE EYE MOVEMENT EFFORT TO TALK PARALYSED MUSCLES PHASE 1 Si FALLING ASLEEP REM WAKE UP PHASE PHASE 2 S2 LIGHT SLEEP PHASE 3 S3 MEDIUM DEEP SLEEP EP DEPTH SHORTENS DREAM PHASE INCREASES 4 5 6 7 8 PHASE 4 S4 DEEP SLEEP ho
12. et yes RES NO Activate reset no SD A SET enu Sound Alarm Set SD V SET lenu Sound Volume Set SENSOR 1 ON Sensor for person 1 is activated SENSOR 2 ON Sensor for person 2 is activated SENSOR 1 OFF Sensor for person 1 is deactivated SENSOR 2 OFF Sensor for person 2 is deactivated SOUNDS Menu Sounds TIME SET Menu Time Set VOL SET Menu Volume Set for Chillout slumber sound 21 6 3 Scope of delivery gt aXbo SleepPhaseAlarmClock gt Sensor person 1 gt Sensor person 2 optional gt Wristband 90 mm gt Wristband 80 mm optional gt Power supply adapter optional gt USB data cable or power cable gt Instruction manual s and or quick starting guide gt 3 rechargeble batteries Ni MH optional For further accessories see axbo com 6 4 Sleeping disorders Please note that aXbo cannot heal any sleeping disorders Don t try to reduce the hours of your individual sleep time with the help of aXbo This may harm your health 22 6 5 Technical data Battery pack AAA Ni MH at least 750 mAh ote minimum initial charging period 8h Adapter 100 240V 50 60 Hz Output 5V 0 5A Radio frequency 2 4 GHz Sensor battery typical service life 4 years Loud speaker power output 1 W Weight alarm clock 216g sensor 16g wristband 18g Dimensions alarm clock H W D 120mm 130mm 42mm sensor H W D 57mm 34mm 10mm wristband 90x65mm wristband 80x65mm
13. et take the return address from the webshop aXbo s official general importer where you bought it Do not return aXbo to the shipper address without any recheck Further information is available at support axbo com We recommend sending your alarm clock by parcel post since this automatically includes insurance Purchaser will be liable for the postage of return parcel In the event of warranty claims it is essential that you send us the alarm clock complete with cable sensors adapter and wristbands Any claims to warranty can only be verified if the sales receipt is included You must send your packet marked clearly as the return of faulty goods in order to avoid paying additional costs Please check the customs regulations of your country at your local post office Please also give your complete address a telephone number and E Mail address in case of queries Battery service All prices and information concerning change of batteries for the alarm clock as well as for the sensor s can be found on support axbo com For further support please go to support axbo com Important safety rules When setting up and using aXbo and sensors please follow the rules below Follow all instructions and warnings Keep these instructions close at hand Plugs and sockets Never try to force a plug into a socket If the plug cannot be easily plugged in it is likely that it doesn t fit into the socket Make sure that the socket is suitable for th
14. g aXbo Make sure aXbo is not plugged in Only use a microfibre cloth or a optician s cleaning cloth to clean aXbo in order to prevent any scratching Never use sprays solvents or alcohol containing Cleaners or abrasives to clean aXbo Cleaning the wristband The wristband is made of 80 cotton 10 spandex and 10 nylon The wristband can be machine washed at 30 C Do not bring the terry toweling wristband into contact with any Velcro fastener e g certain types of bed sheets as this can damage the wrist band Any rights to changes to the material composition of the wristband are reserved Note Frequent washing can lead to changes in size colour intensity and elasticity Cleaning the sensor The sensor is only splashwater resistant but must not be washed under any circumstances Instructions for use Keep aXbo sensors cable and adapter at room temperature Electronic equipment can be harmed by being exposed to direct sunlight Do not expose aXbo sensors cable and adapter to dampness or moisture Avoid any malfunction through bumps and shocks No parts delivered may be exposed to fire aXbo contains nickle metal hydrid batteries aXbo sensors cable and adapter must not be dis posed of as household waste Please refer to your dealer of electronic goods or the specialised collecting units Service In case of a return please bring send your aXbo to the shop where you bought it If you bought your aXbo in the intern
15. iable for damage to and does not guarantee against the loss of program data and other information saved to the storage medium within the product The resto ration or reinstallation of programmes data and other information is not subject of this warranty The producer is not obliged to provide any warranty measures if the product has been damaged estroyed or changed through accident mishandling or false use or by use of products or ser vices of any nature which were not provided by the producer Q The producer shall not be liable for guarantee warranty or damages if the product has been modified or opened by the purchaser without the producer s prior written consent or equally if the serial number of the product has been removed or made intelligible o aXbo dealer agent or the producer employee has the right to change amend or enlarge this warranty declaration in any way Unless explicitely required by law the producer shall not be liable for any consequential damages caused by the use of this product In particular the producer shall not be liable for damages to customers lost profits or loss or damage to data Malfunction Warranty claim In case of malfunction of the product please refer to the information concerning start up and error correction on our website support axbo com If the malfunctions continues you will find all necessary instructions concerning warranty claims support axbo com Important note Plea
16. is specific plug and that you have turned it the right way Notes concerning operating and storage temperature Only operate aXbo and the two sensors at temperatures ranging between 0 C and 45 C Do not attempt any repairs yourself Do not try to open aXbo or sensor to remove any parts or batteries of the alarm clock or sensors without producers prior consent or instructions from our Support Center This can lead to a short circuit and you risk losing any warranty claim There are no components inside the alarm clock that can be maintained by the user Radio signals during travel In order to avoid radio signal interference e g when flying deactivate both sensors and activate the key lock on the alarm clock see chapter 3 6 p 13 20 6 2 Explanation on display messages a Alarm for person 1 Gan Alarm for person 2 wD ovement person 1 Dr ovement person 2 ains supply Sean Battery charging levels Explanation menu display messages ALARM enu Alarm AL 1 SET enu Alarm Person1 Set AL 2 SET enu Alarm Person2 Set AL T SET enu Alarm Time Set AXBO V230 e g Keys are locked CHARGE LOW BAT Low energy level gt recharge batteries CHILLOUT enu Chillout slumber sound F 24 SET lenu Format 24h Set F AM SET enu Format AM PM Set GOOD MORNING Wake up alarm P1 SET enu Person 1 Set P2 SET lenu Person 2 Set RES YES Activate res
17. lay light will fall asleep too It is dimmed to slumber mode aXbo uses less energy this way and your sleep is not disturbed by any light If you press push on your wristband the display light will come on briefly the alarm time is displayed for approx 10 seconds and the display light fades out again The LCD slumber mode also helps prolong the working time of your batteries especially helpful on travel 3 8 Data transfer aXbo can store sleep data of 2 persons for a duration of minimum 14 days The transfer of data from aXbo to the computer is possible using the optional enclosed USB cable see 2 3 Registration p 7 3 9 Reset Reset will return the alarm clock back to the settings at delivery gt gt Press back click home together for 3 seconds gt gt scroll to RES YES gt click confirm All selected settings will be erased The stored data are still available aXbo automatically returns to standby mode and can be newly set 4 Batteries and or Mains Adapter both optional Battery operation aXbo comes optional with three already installed AAA Ni MH batteries These can be recharged at any time by using the cable and the optional adapter If batteries are fully charged aXbo can run for up to 10 days without recharge This makes aXbo an ideal alarm clock to use also in households where power is cut off from bedrooms at night time Note In order to save electricity aXbo only receives sign
18. ogether for 2 seconds Error Problems by using the software aXbo research or aXbo up2date Solution Please visit our Support Center support axbo com and follow the instructions In our Support Center you can find the newest driver and FAQs concerning the installation of aXbo software It could be up to your USB data cable and or your computer and or your internet or rather your firewall and or your driver not suitable e g Usually the problem will be solved very easily 24 Error aXbo cannot be switched on or does not react Is the key lock activated Does the display show HOLD BACK HOME Solution Unlock the keys by pressing back home together for 2 seconds Error aXbo can not be charged or rather the batteries does not hold for a long time Solution Please visit our Support Center support axbo com and follow the instructions In our Support Center you can find the FAQs concerning the aXbo batteries It could be up to your adapter and or your cable and or your batteries Furthermore you can find on our Support Center a movie how to check and change your batteries by yourself Please make sure that the charging cable is completely plugged into the plug socket to ensure that the rechargeable battery is properly charged 25 6 7 Key functions The following control elements are available The superior positioned digits help you to quickly find the key you require see foldout list of keys on p 3
19. ons p 13 click p 27 Maintenance p 18 Unlock keys p 14 home p 27 Manual charge p 15 USB cable p 15 push p 27 Power cable p 16 Volume p 11 scroll p 26 Power cut off p 15 Warranty p 29 Adapter p 16 PowerNap p 11 Wristband p 6 Alarm p 8 Producer s note p 33 Alarm deactivate p 9 Quick set one click p 17 Alarm set p 8 REM Sleep p 5 Alarm sounds p 10 Reset p 15 Alarm sound stop p 10 Safety rules p 20 Alarm tone p 10 Scope of delivery p 22 Battery p 15 Sensor p 6 Battery charging level p 16 Sensor activate p 14 Battery service p 19 Sensor deactivate p 13 Body movements p 5 Short manual p 28 Case of warranty p 19 Signal duration p 23 CHARGE p 16 Sleep p 5 CHILLOUT p 12 Sleep cycle p 5 Cleaning amp maintenance p 18 Sleep phase p 5 Data transfer p 15 Sleeping disorder p 22 Deep sleep p 5 Slumber sound p 12 Display p 21 Sounds p 10 Display slumber mode p 14 Support p 19 Dominant arm p 6 Technical data p 23 Error correction p 24 Time p 8 Key functions p 26 Time format p 8 Key lock p 13 Travel p 13 32 FCC Rules This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation The device must not be tampered with or modified in any way unless you are required to do so according to the user manual Unauthorised modifica
20. se save all data and software programmes before sending in the product You are also responsible for reinstalling all data The restoration of data is not part of the warran ty and the producer shall not be liable for any loss or damage to data during transport or repair work 30 Court of jurisdiction and applicable law This contract is based upon British material righ commercial agreements and law If the customer is also consumer all statutory consumer rights covered by the national law of Any legal dispute arising from his her legal don his contract shal at the seat of the producer If the customer is a competent court at the consumer s legal domici held to be the competent court The competent court only shal defined by law the authority o of jurisdiction that court in the icile are also applicable so consumer the have exclusive jurisdiction If the customer jurisdiction area of which works or is regularly located is accepted as es this contract is the headquarte s location of the producer 31 le permanent address or u t and excluded from UN international be heard by the competent court of jurisdiction sual work place is is a consumer as he customer resides ablished Place of jurisdiction and performance of Index back p 26 Light sleep p 5 Travel functi
21. tion to the device may result in a withdrawal of the user licence Producers note Produced by See detailed information referred to the last page Product idea Boris Eis Industrial product design Rouven Haas www designment cc Product development hard and firmware www meds at Graphics amp artwork Axel Ferro www strahler80 at Software development Jan Illetschko www 3kraft com Audio amp Sounddesign Max F rth www noyz biz Photography Christian Maricic www karafiat at 33
22. urs gt gt 2 First steps We would like to congratulate you once again on the purchase of your aXbo the world s first SleepPhaseAlarmClock Please follow the following steps to activate aXbo 2 1 Activate aXbo Plug aXbo into the adapter For its first charging cycle you should charge your aXbo for a minimum of 8 hours 2 2 Activate sensor aXbo comes with a sensor for person 1 and optional with a sensor for person 2 These can be differentiated by the markings on the inside Both sensors are delivered deactivated Activate sensor Note Once the sensors are in position in the wristband you can monitor movements of person 1 and person 2 easily on the display see control elements p 3 Important note Optimum wake up is only possible if you wear the wristband correctly during the night with a correctly installed active sensor If you do not wear the wristband aXbo will activate its basic alarm function and wake you like a conventional alarm clock gt gt Press push button on the wristband firmly and continuously for 5 seconds The display will show SENSOR 1 ON SENSOR 2 ON depending if the sensor for person 1 or 2 was activated Slip the ergonomically designed sensor into the pocket on the inside of the terry towel wristband of your choice with the arrow pointing towards your hand see fig p 7 gt Be sure to wear the wristband like you would a watch with the sensor on the upper si
23. wer breakdown f you are using your aXbo without batteries we have to advise that in case of a power break down any settings will be lost your alarm times as well If so could be possible that you will not be woken by aXbo or not just in time 5 Quick set by one click Quick set functions enable you to activate or deactivate a set alarm or set a new alarm for a person Person 1 Activate Deactivate alarm lf the alarm is activated it will be deactivated and vice versa gt gt Press back button in standby mode for 2 seconds Person 1 Quick set new alarm time gt gt Press back button once shortly in standby mode gt gt scroll hours gt click confirm gt gt scroll minutes gt click confirm The alarm for person 1 is now set and activated Alarm sound and volume remain unchanged aXbo will automatically return to standby mode Person 2 Activate Deactivate alarm lf the alarm is activated it will be deactivated and vice versa gt gt Press home button in standby mode for 2 seconds Person 2 Quick set new alarm time gt gt Press home button once shortly in standby mode gt gt scroll hours gt click confirm gt gt scroll minutes gt click confirm The alarm for person 2 is now set and activated Alarm sound and volume remain unchanged aXbo will automatically return to standby mode 6 Appendix 6 1 Cleaning maintenance safety Cleanin
24. xation period during the day with a maximum duration of 30 minutes aXbo is able to find your best moment in doing so Detailed information to this and further features you can find at axbo com 3 5 Slumber feature CHILLOUT In order to fall asleep more easily you can choose between three relaxing sounds aXbo will automatically detect when you have fallen asleep and dim out the sound Select slumber sound and volume gt gt click to menu CHILLOUT gt gt scroll select slumber sound gt click confirm The slumber sound is now activated and can be heard at the last selected volume aXbo jumps automatically to menu VOL SET Volume Set gt gt scroll select volume gt click confirm if you want to save the new selected volume aXbo returns automatically to standby mode Volume control in standby mode You can also change the volume at any time in standby mode by using scroll In this case the current volume will not be saved Stop slumber sound gt gt Press any button on the alarm clock Note Please make sure you wear the wristband correctly so that aXbo can automatically detect if you have fallen asleep and dim out the slumber sound 3 6 Travel function When travelling with aXbo make sure to follow the steps below in order to deactivate the sensor batteries This will also prolong the service life span of your batteries 1 Deactivate sensor s gt gt Press push button on

CONGRATULATIONS

Contents

Download Pdf Manuals

Related Search

Related Contents