SW-HD-4 User`s Manual
Contents
1. 3 0 Installation The following diagram illustrates a typical setup VIDEO SOURCES RS232 CONTROL HDMI OUTPUT Installation diagram showing all possible connections IR Sensor Source Selection Button Power Button amp Indicator Selection Indicators INPUTS a EONTROL EEEE IR IN DC Firmware External VIDEO IR Input Upgrade Port POWER INPUTS RS232 Control Port INPUT LAN Control Port If the SW HD 4 needs to be installed in a standard 19 rack Hall Research offers a rack mount kit specifically for this purpose part number F10511 Kit F10511 Kit required for rack mounting 4 port HDMI Fast Switch with IP Control 3 1 Configuration Connect all the video sources to the INPUT connectors on the back Connect the display device to the OUTPUT connector on the back Connect the Power Supply to the power input on the back Connect an external controller or PC to the RS232 port if required Connect IP port to compatible LAN network if required Connect IR detector to IR port if required 4 0 Operation The unit can be controlled via front panel and external control options like RS232 Telnet and the WebGUI e Press the POWER button on the front of the unit to turn the unit on The LED next to the button will always display the power status e Press the INPUT button to cycle through the available video inputs connected The input selection LED s will2. Where n 1 through 4 and represents the Input Where m 0 for OFF or 1 for ON IF NO SINK DEVICE or DEVICE POWERED OFF 910 IF SINK CONNECTED and DEVICE POWERED ON TYPE AAAAA NAME BBBBB RESOLUTION CCCCC COLOR DDDDD 3D EEEEE 4K2K FFFFF Audio Format GGGGG Set EDID Setting for ALL Inputs DEFAULT 1 for SINK EDID Set EDID Setting for a specific Input DEFAULT 1 for SINK EDID Query HDCP Setting for ALL Inputs Set HDCP Setting for a specific Input If HDCP is disabled and the video content actually has HDCP information the OUTPUT video will be blanked Query all inputs for presence of HDMI 5v if source is connected and turned on there will be 5v on HDMI pin 18 Query Specific input for presence of HDMI 5v Query Connected SINK information NI lt CR gt NI1 m Query WEBGUI Input Names NI2 m NI3 m Nl4 m Where m max 8 character name for input NIn m lt CR gt NI1 m Set WEBGUI Input Names Where n 7 1 thru 4 and represents the Input DEFAULT INPUT Where m max 8 character name for input Where AAAAA HDMI or DVI Where BBBBB ISA PNPIP from SINK EDID Where CCCCC Current video resolution Where DDDDD Current Color Depth Where EEEEE 3D Supported YES or NO Where FFFFF 4K2K Supported YES or NO Where GGGGG Current Audio Format NO lt CR gt NO1 m Query WEBGUI Output Name Where m max 8 character name for output DEFAULT OutputA NOn m lt CR gt NO1 m Set WEBGUI Ou
3. show which input is directed to the OUTPUT connector The Video LED illuminates when video is detected for the selected input e Press and hold the INPUT button for seconds to enable and disable the auto switching mode in AUTO mode the input LEDs will blink e Press the POWER and INPUT button simultaneously for 3 seconds to factory reset the unit e The USB port can be used for firmware upgrade 4 1 RS232 and Telnet Commands e 9600 baud No Parity 1 Stop Bit e Telnet operation via specified port Def 23 e Inthe table below CR represents 1 character 0x0D and lt LF gt represents 1 character 0x0A e response is terminated by a 2 character sequence lt CR gt lt LF gt e Spaces between the COMMAND and 1 parameter are ignored e Invalid Command lt CR gt lt LF gt returned as an error message PWn CR n 0 means POWER OFF Set Power Status nz1 means POWER ON Response PWn as described above PW lt CR gt Response PWn Query Power Status n 0 means POWER OFF n 1 means POWER ON FR lt CR gt Response FR Unit settings are reset to factory default Power is ON Output is routed to Input 1 FRETH lt CR gt XX XX XX XX XX XX Reset LAN parameters to factory default AD DD MAC ADR IP XXX XXX XXX XXX DD DHCP SN XXX XXX XXX XXX XXX 0 255 GW XXX XXX XXX XXX HH 0 65535 HP HH TT 0 65535 TP TT FB lt CR gt Response FB Reboot device and Power On
4. Auto Switching mode and the unit will select the desired input 4 4 Front Panel and IR Remote Lock Front panel buttons of SW HD 4 can be locked via WebGUI RS232 or Telnet to prevent users from switching or changing modes When enabled attempts to change the auto mode input selection or power status will be ignored The only way to re enable the IR Remote and the front panel buttons is to send an unlock command from WebGUI RS232 or Telnet factory default also unlocks the front panel 4 5 Factory Default If the POWER and INPUT button is pressed simultaneously for 3 seconds when the unit is operational with the power already applied the IP parameters are reset to the FACTORY DEFAULT values which results in Power light blinking once The default IP address is set to DHCP The Hall Research Device Finder HRDF can be used to find the SW HD 4 on the network The IP address can be changed from DHCP to Static using the HRDF software or using external control commands WebGUI RS232 or Telnet 4 6 EDID Settings EDID Modes can be selected by choosing ALL option a set of 9 EDID predefined settings for all the inputs or APPOINT option Each Input with unique EDID from the WebGUI RS232 or Telnet commands Mode Selection Description EDID All HDMI Output TV Sink s EDID 8 2D PCM 720p Built In EDID with 8 bit color depth 2D3D PCM audio format 720p native resolution 8 2D PCM AC3 720p Built In EDID with 8 bit col
5. HALL USER S MANUAL RESEARCH CONTROL SW HD 4 HDMI Fast Switch with IP RS 232 and IR Control Supports 4Kx2K UMA1232 Rev n c Copyright 2015 Hall Research Inc All rights reserved 1163 Warner Ave Tustin CA 92780 Ph 714 641 6607 Fax 714 641 6698 4 port HDMI Fast Switch with IP Control Table of Contents 1 0 Introduction 4 DAVIS QUOC RET E E TO D o OT 4 2d ant eru Lap 4 TIS META CIO Ui TET IET 5 SEL On OE 6 RURSUM 6 4 1 RS232 and Telnet Commands eese 6 4 2 WebGUI Op GPa tOM 9 4 3 Auto Switching 11 Front Panel LOCK ORA SAA ASEENAAN 12 aO ad BI Om 12 SORS BIUBEC IU NR E T 12 5 0 Troubles OO e oS timet idi 14 5 1 Contacting Hall Research seen 14 5 2 Shipping and Packaging 14 ESC CHIC ALOIS IDEM ER SONNERIES KE 15 TRADEMARKS USED IN THIS MANUAL Hall Research and its logo IFS are trademarks of Hall Research Any other trademarks mentioned in this manual are acknowledged as the property of the trademark owners FCC RADIO FREQUENCY INTERFERENCE STATEMENT This eq
6. Operating Temperature MTBF Warranty IR Remote Protocol IR POWER Code IR INPUT 1 Code IR INPUT 2 Code IR INPUT 3 Code IR INPUT 4 Code 480i to 1080p 50 60 1080p 224 4K2K per following 3840x2160 24 25 30 or 50 60 with YUV 4 2 0 4096x2160 24 or 50 60 with YUV 4 2 0 Up to 3 00 Gbps Single Link LPCM 2 5 1 7 1CH Dolby Digital 2 5 1CH DTS 2 5 1CH Dolby TrueHD and DTS HD Master Audio 4 x HDMI Female with Locking Capability 1 x HDMI Female with Locking Capability 5 VDC 2 6aDC US EU Standard CE FCC UL Certified Human Body model 8kV air gap discharge 4kV contact discharge 9 75 248mm W x 4 5 114mm D x 2 0 51 H All protrusions included Product 1 8 Ibs 0 8 kg Shipping 2 8 Ibs 1 27kg Metal Storage 40 to 158 F 40 to 70 C 1096 to 90 non condensing Operating 32 to 122 F 0 to 50 C 1096 to 90 non condensing 90 000 estimated 2 years parts and labor NEC or NEC Extended 0x40 OxAF OxOE OxF1 0x40 OxAF 0x01 0x40 OxAF 0x03 OxFC 0x40 OxAF 0x02 OxFD Ox40 OxAF Ox19 OxE6 Appendix 1 Complete list of Supported Video Resolutions DVI and HDMI Supported Resolutions 640x480 60 640x480 72 640x480 75 720x480 60 720x576p 50 800x600 60 800x600 72 800x600 75 1024x768 60 1024x768 70 1024x768 75 1280x720 50 1280x720 60 1280x720p 60 1280x768 60 1280x800 60 1280x1024 60 1360x768 60 1600x1200 60 1920x1080i 050 1920x1080
7. This tab shows the EDID routing status Each INPUT can have a unique EDID or the EDID from the connected SINK EDID EDID Mode ALL Y EDID ALL HDMI OUT HWP v HDMI OUT HWP 8 2D PCM 720p 8 2D PCM AC3 720p 8 2D PCM 1080p 8 2D PCM AC3 1080p 8 2D PCM 4K2K 8 2D PCM AC3 4K2K 8 2D PCM Y 420 8 2D PCM AC3 Y 420 o Settings This tab shows the current HDCP Control settings WEBGUI Input and Output names as well as buttons for Reboot Factory Reset Panel Lock and Auto Switching If the Panel Lock is enabled the button is highlighted and the AUTO SWITCH button is disabled HDCP Control INPUT 1 HDCP Enabled v INPUT2 HDCP Enabled v INPUTS HDCP Enabled v INPUT4 HDCP Enabled v EDID Mode EDID APPOINT Y EDID IN1 HDMI OUT HWP v EDIDIN2 HDMI OUT HWP EDIDINS HDMI OUT WP v EDID IN4 HDMI OUT HWP v Input Names INPUT 1 INPUT1 INPUT2 INPUT2 INPUT3 INPUT3 INPUT4 INPUT4 and Output Names HOMI OUT OUTPUTA M The Switcher can disable HDCP support for any input forcing the source to send unencrypted content when allowed some sources add HDCP even if the content shown is not protected When the input does not have HDCP the output will not have HDCP This is a useful feature for connecting the output to devices that do not support HDCP such as video conferencing gear o Network Configuration This tab shows the current network settings To save any changes made click the Save button The b
8. e for ALL Inputs Where n 0 for APPOINT Configures device for which EDID the Where n 1 for ALL source INPUTS EDA lt CR gt EDI1 n Query EDID MODE Setting for ALL Inputs EDI2 n EDI3 n EDM n Where n 1 through 9 1 SINK EDID 6 8 2d PCM 4K2K 2 8 2D PCM 720p 7 8 2d PCM AC3 4K2K 4 port HDMI Fast Switch with IP Control EDAn lt CR gt EDn m lt CR gt HDCP lt CR gt HDCPn m lt CR gt HD lt CR gt HDn lt CR gt SI lt CR gt 8 2d PCM AC3 720p 8 8 2d PCM Y420 4 8 2d PCM 1080p 9 8 2d PCM Y 420 5 8 2d PCM AC3 1080p EDI1 n EDI2 n EDI3 n EDI4 n Where n 1 through 9 1 SINK EDID 6 8 2d PCM 4K2K 2 8 2D PCM 720p 7 8 2d PCM AC3 4K2K 8 2d PCM AC3 720p 8 8 2d PCM Y420 4 8 2d PCM 1080p 9 8 2d PCM Y 420 5 8 2d PCM AC3 1080p EDI1 n EDI2 n EDI3 n EDI4 n Where n 1 through 4 for the Input Where m 1 through 9 1 SINK EDID 6 8 2d PCM 4K2K 2 8 2D PCM 720p 7 8 2d PCM AC3 4K2K 8 2d PCM AC3 720p 8 8 2d PCM Y420 4 8 2d PCM 1080p 9 8 2d PCM Y 420 5 8 2d PCM AC3 1080p 1 HDCP2 m HDCP3 m HDCP4 m Where m 0 means HDCP Processing is DISABLED Where m 1 means HDCP Processing is ENABLED HDCPn m Where n 1 through 4 and represents the Input Where m 0 means HDCP Processing is DISABLED Where m 1 means HDCP Processing is ENABLED HD1 m HD2 m HD3 m HD4 m 1 through 4 and represents the Input m 0 for OFF or 1 for ON HDn m
9. i 060 1920x1080p 224 1920x1080p 225 1920x1080p 230 1920x1080p 250 1920x1080p 260 1920x1200 60 RB 3840x2160 24 25 30 50 60 4 2 0 4096x2160 24 50 60 4 2 0 HESS HALL RESEARCH Copyright 2015 Hall Research Inc All rights reserved 1163 Warner Ave Tustin CA 92780 Ph 714 641 6607
10. or depth 2D3D Dolby Digital audio format 720p native resolution 8 2D PCM 1080p Built In EDID with 8 bit color depth 2D3D PCM audio format 1080p native resolution PCM audio format 4K video native resolution audio format PC native resolution audio format PC native resolution EDID Appoint EDID IN3 Input 3 s EDID EDID IN4 Input 4 s EDID 8 2D PCM AC3 AK2K Built In EDID with 8 bit color depth 2D3D PCM audio format 4K video native resolution 5 Troubleshooting There are no field serviceable parts or circuits in the device Opening the unit will void the warranty 5 1 Contacting Hall Research If you determine that the SW HD 4 is malfunctioning do not attempt to repair the unit instead contact Hall Research Technical Support at 714 641 6607 or support hallresearch com Before you do make a record of the history of the problem We will be able to provide more efficient and accurate assistance if you have a complete description 5 2 Shipping and Packaging If you need to transport or ship your unit Package it carefully We recommend that you use the original container Before you ship the units back to Hall Research for repair or return contact us to get a Return Authorization RMA number LD 4 port HDMI Fast Switch with IP Control 6 0 Specifications Video Resolution Video Bandwidth Audio Standards Input Ports Output Ports Power Supply ESD Protection Dimensions Weight Enclosure
11. ort HDMI Fast Switch with IP Control Click the Save button after making any changes Click the Reboot button to reboot the device HRDF v2 000 Bl E E Click here to search for devices METTI EE D Find Devices on Network H 4 Port 4Kx2K HDMI FAST SWITCH 192 168 123 117 F8 22 85 0C 03 5A Each device found will be listed on a separate line Click on device to open editing window for that device IP Address Product ID 2236 Product Name SW HD 4 MAC Address F8 22 85 0C 03 5A Subnet Mask Gateway IP DNS IP Mode Web GUI Port o Telnet Port o o o o SUD SN 2236 Firmware Version v1 08 Hardware Version v1 00 Description 4 Port 4Kx2K HDMI FAST SWITCH Web GUI Web GUI __5 _Reboot SW HD 4 internal Web pages WebGUI o Access the SW HD 4 Webpage with any compatible browser at the IP address found above The browser will open with the devices STATUS tab displayed Click the tabs at the bottom of the screen to access the other tabs o Status Tab The tab shows status of the device along with output information POWER and ROUTING are controllable Routing Source Output Information Power ON Input 1 OFF Type HDMI HDMI OUT From INPUT3 Y Input 2 OFF Manuf Name HWP EDID Mode ALL Input 3 OFF Native resolution 1680x1 050p Input 4 OFF Color Depth 12 Bits 3D NO 4K2K NO Audio Format PCM o EDID Control Tab
12. rowser may prompt the user to confirm the settings MAC Address Address Type IP Address Hel Mask Default Gateway Http Port Telnet Port F 22 854072 03 54 DHCP 7 192 168 123 117 255 255 255 0 132 168 123 1 80 23 Save J 4 3 Auto Switching Auto switching with priority is another important feature of the switcher ooo 4 port HDMI Fast Switch with IP Control In Auto mode the SW HD 4 scans all inputs and automatically selects the active input Priority is based on position with 1 input having the highest priority so if more than one input has video in Auto mode the input with lowest port number will be selected Auto Switching Mode can be enabled and disabled by external command RS 232 Telnet or WebGUI or via the front panel pushbuttons Auto mode cannot be changed using the IR remote e To enable Press and hold the INPUT button for 3 seconds After releasing the INPUT button the front panel INPUT LEDs blink to indicate that AUTO mode switching 15 active e Disable Press and hold the input button for 3 seconds After releasing the INPUT button one of the front panel INPUT LEDs will be illuminated solid showing the selected input When Auto Switching mode is ENABLED just clicking the front panel INPUT button or the IR remote buttons will have no effect i e the unit will remain in Auto mode However Selecting inputs via WebGUI RS232 or Telnet commands will cancel the
13. ted EDID control is provided whereby you can select the EDID content for each input from a list of standard EDIDs or to copy the EDID from the connected display to any input This can be done using the web GUI or by sending RS 232 commands The SW HD 4 provides a USB type A port on the back for connection of USB flash devices for firmware upgrade This USB connector provides 500 ma of power and can be used to power external devices such as Google s Chromecast or Amazon s Fire TV 2 0 Features Fast Switch technology reduces switching times to a couple of seconds Front panel LED indicators for status monitoring e Supports resolutions to 4Kx2K e Supports 3D and deep color Control via Front Panel IR RS232 Telnet and WebGUI Includes Remote Control Plug and play installation takes minutes to setup HDMI 1 4 HDCP 1 1 and DVI 1 0 Compliant High Definition audio pass through EDID emulation or pass through Compatible with Apple devices e Supports HDMI Cable Locking USB port can power devices such as audio extractors or video players 2 1 Package Contents Qty 1 SW HD 4 Switcher enclosure e Oty 1 Locking 5V DC Universal Power Supply Qty 1 IR Remote Control Oty 1 IR Remote Detector cable Qty 1 User s Manual All packages are carefully inspected prior to shipment However if you think that you are missing an accessory please contact Hall Research Support for further assistance
14. tput Name Where m max 8 character name for output DEFAULT OutputA FW lt CR gt FWx y Query Firmware Version Where x is the major version Where y is the minor version AUTO lt CR gt AUTOn Query Auto Switching Status Where n 0 means Auto Switching is DISABLED Where n 1 means Auto Switching is ENABLED AUTOn lt CR gt AUTOn Set Auto Switching Mode Where n 0 means Auto Switching is DISABLED Where n 7 1 means Auto Switching is ENABLED 4 2 WebGUI Operation As shipped from the factory or after factory default reset the SW HD 4 IP address is set for DHCP meaning that it does not have an assigned static IP address and when connected to a router on a LAN the router will assign an IP address to the device This can speed up the setup process in most instances the device will get a valid IP address that matches your network and the last octet will be unique so it does not conflict with any other existing IP address on the network A user can find the IP address using the following method and once access is established the IP address can be changed to STATIC rather than DHCP if desired Finding the SW HD 4 on the compatible LAN network o The Hall Research Device Finder Windows GUI is available free from the Hall Research website s product webpage This program can locate the SW HD 4 on the network o Selecting any device displayed opens a window where certain fields are modifiable 4 p
15. uipment generates uses and can radiate radio frequency energy and if not installed and used properly that is in strict accordance with the manufacturer s instructions may cause interference to radio communication It has been designed to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules which are intended to provide reasonable protection against such interference when the equipment is operated in a commercial environment Operation of this equipment in a residential area is likely to cause interference in which case the user at their own expense will be required to take whatever measures may be necessary to correct the interference Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment eee Compliant RS Fe 4 port HDMI Fast Switch with IP Control 1 0 Introduction The SW HD 4 is a 4 input HDMI Switcher with InstaPort Technology from Silicon Image enabling fast switching of four HDMI sources to a single HDMI output The switcher supports 4K UHD 3D and 36 bit Deep Color video Control switching via front panel button using IR remote control RS 232 Telnet or the web GUI is built in the unit Auto Switching mode 1s also available In this mode the switch checks for video connection on the inputs and switches to the first input detec
16. with Output 1 routed to last selected Input FP lt CR gt Response FPn Query Front Panel Lock Status n 0 means front panel unlocked n 1 means front panel locked FPn lt CR gt Response FPn lt CR gt as described above Set Front Panel Lock Status COn m lt CR gt n output m input Connect Output to Input or Blank Output If AUTO Switching is Active AUTO n 1 Always a 1 as there is only 1 OUTPUT setting an INPUT directly will turn off the m 0 thru 4 where AUTO Switch Mode m 0 means blank output m 1 to 4 means route that INPUT to OUTPUT CO1 CR Response CO1 CR as described above Connection Status Query ST lt CR gt Responds with PWn and COn m Query information Status Query IPCONFIG lt CR gt MAC XX XX XX XX XX XX Shows IP Configuration settings AD DD MAC ADR IP XXX XXX XXX XXX DD DHCP SN XXX XXX XXX XXX XXX 0 255 GW XXX XXX XXX XXX HH 0 65535 for HTTP HP HH TT 0 65535 TP TT IP XXX XXX XXX lt CR gt IP Set IP Address Where XXX 0 255 SB XXX XXX XXX CR SB XXX XXX XXX XXX Set Subnet Mask Where XXX 0 255 GW XXX XXX XXX lt CR gt GW XXX XXX XXX XXX Set Gateway Address Where XXX 0 255 HPn lt CR gt HPn Set HTTP Port Default 80 Where n 0 to 65535 TPn lt CR gt TPn Set Telnet Port Default 23 Where n 0 to 65535 ADn lt CR gt ADn Set IP configuration Where n 0 for STATIC Where n 1 for DHCP EDn lt CR gt EDn Set EDID Mod
Download Pdf Manuals
Related Search