Instructions manual
Contents
1. e The energy saving indicator indicates whether the currently set setpoint will allow obtaining savings With respect to the conventional average consumption Locking the interface via PIN The thermostat lets you set a password see par 5 12 which inhibits any change to the operating mode eg switching from Manual to OFF limits setting the temperature values and more generally blocks access to the configuration menu This feature is useful to prevent the thermostat being used by unauthorized persons the device prompts nan UUU aya Fig 3 Locking with PIN __ gp ptptptttt rr VIMAR 4 Operating mode The thermostat 02906 is able to adjust the temperature according to the following operating modes e Switched off OFF switches the system off without making any adjustments e Manual ON lets you set the required temperature set point manually e Away is a mode that lets you set the set point in order to achieve significant energy savings during periods when the user is away e Nighttime reduction this mode which can be activated locally is useful for changing the manual adjust ment set point in the hours of nighttime operation e Antifreeze used to set a minimum temperature level to avoid damage to pipework or prevent the temper ature from falling below a safety level The operating mode is selected via the SETTINGS menu see chap 4 4 1 Switched off OFF With this mode on2. exits the current screen menu and returns to the previous one without sav ing any changes In menus with changes to multiple digits it lets you go back to change the previous digit N B The field value being edited is highlighted by the field value itself flashing 3 2 Symbols Depending on the different operating modes the following icons could also be displayed sil GSM network signal status nm UU Calibration gt Away ON Manual ON by Nighttime reduction Antifreeze OFF Switched off OFF Air conditioning dl Heating Y Confirm Q Eco saving 3 3 3 4 VIMAR Ecometer e L Energy saving Ring for the level of consumption indicator a DN J Fig 2 Set of ECOMETER icons On the left hand side of the display there is a set of icons called the ECOMETER that provide an overview of the expected consumption as an aid to energy saving The information displayed is based on a consumption forecast obtained by comparing the currently set temperature setpoint and the estimated average consumption which therefore has nothing to do with the current room temperature e The consumption level ring graphically indicates the expected level of consumption If this level is less than half it means that there will be a saving compared to the conventional average consumption vice versa if the level exceeds half the expected consumption will be higher than the conventional average
3. of the burner or circulation pump heating or on the control circuit of the air conditioner air conditioning ensuring an ideal temperature The graphical user interface thanks to special views facilitates system management helping the user to oper ate while maintaining a state of energy saving The thermostat has a GSM communicator for remote control making it ideal for installation in second homes 2 GSM function By sending and receiving SMSs with the appropriate encryption the thermostat can be switched on off and queried for viewing data on the room and it can perform various other functions interaction with the device for remote control is via the By clima smartphone app that automatically creates the encrypted SMSs Using these features you can then e Set the operating parameters of the thermostat e Send commands e Query the thermostat to know the current operating status e Receive previously configured and enabled alarm notifications e Receive from the thermostat any SMSs that have not been recognized as command SMSs Command and monitoring SMSs are generated by the By clima App while voice calls reading and therefore interpreting incoming SMSs must be managed manually by the user with the standard smartphone functions More in detail the functions associated with GSM mode via SMS or via voice calls are e Thermostat management setting the operating mode Off Antifreeze Away Manual Nighttime reduction e Thermos
4. the thermostat is turned off and you cannot make any adjustments in this case the OFF icon is displayed above the temperature indicator When the thermostat is OFF you cannot perform any operations other than accessing the configuration menu OFF UY of 9 ES Fig 4 Typical screen for OFF mode For heating only systems this mode is typically used in the summer VIMAR 4 2 Manual ON This is the traditional operating mode The thermostat controls the room temperature and takes it to the value set by the user manual adjustment setpoint N Hb AU UA 2 Fig 5 Typical screen for Manual mode The set point can always be changed via or er In the course of set Pl ing the set point flashes and the circular ring fills up accordingly this gives an indica tion of the expected consumption as a function of the set point you are setting L fw Ih cd aya Fig 6 Manual set point setting The selection is confirmed by touching v The Y and de icons in the lower right corner indicate whether the system is operating in heating or air conditioning mode respectively icon illuminated system on 4 3 Away VIMAR This mode is useful to achieve energy savings quickly and effectively whenever the user leaves the reg ulated room In Away mode the system makes the adjustment according to the away temperature setpoint TO The Away mode can only be ac
5. Instructions manual 02906 GSM thermostat User Manual VIMAR AAA VIMAR Table of Contents 1 GSM thermostat 02906 rana 2 2 GSM TUNCION rana 2 2 1 Fitting and replacing the SIM Card aaa Naa Bag 2 display RL RIO 4 3 1 Functions fthe b ttons viii fare ORA AA 5 DIZISYMDOLS siria elia 5 3 3 ECOMEIET esse 6 3 4 Locking the interface via PIN NANG GGERAAANANNNGEGERANANANNNGGcnnaaaannnasssaanana 6 4 Operating 111912 CE E A 7 4 1 SWitched Off 215 MER RS E EA A eA inani 7 NEN nennen 8 COW RANA A AAA AAA AAA 9 AA Nighttimesreduetion ine 10 AS AMINES A RARA 11 5 Settings MENU AA irachena 12 5 1 Operating Mode setting aaa DARK AAA 12 5 2 Heatinglair Conditioning Setling euren 13 5 3 Temperature set point Setting paaa ANA AA cda 13 5 4 Unit of measurement setting i 13 SS Calibration Sewing u ea enge 13 5 6 External probe SUING sss resin yeoman cree ea Daun 13 5 7 ONOff PID setting nisan innniaanai i ianaainat aas 13 9 G BUZZ SOINI sunset 13 5 9 Standby brightnessilevelisetting sascha 13 SAO GSM SWNG AT 14 ao oo cece EEE 14 12 LOCK UNIOCK PIN OO caricia BARA aaa a aaa E A a aa E a a aaa onina 4 6 Cleaningithe device uncut aaa aaa 14 Installation TUS A A A AAA A 14 Regulatory COMPIANCO cooronononoronasonssaaaraaacanaraa aran aran aaa aaa 14 AA VIMAR 1 02906 GSM thermostat This device is designed to control room temperature by acting on the control circuit
6. at is set on heating Using 4 a and v select the required mode and confirm with W7 AA VIMAR 5 2 Heating air conditioning setting This menu is for the sole use of the installer 5 3 Temperature set point setting This menu is for the sole use of the installer 5 4 Unit of measurement setting e The menu lets you set the unit of measurement used for the temperature C or F Using 4 a and Y select the required unit of measurement and confirm with ZA 5 5 Calibration setting This menu is for the sole use of the installer 5 6 External probe setting This menu is for the sole use of the installer 5 7 OnOff PID setting This menu is for the sole use of the installer 5 8 Buzzer setting This menu lets you enable disable the acoustic signals of the thermostat if it is disabled there will no longer be any sound when you touch the buttons or in cases of confirmation error Whereas in the event of an alarm the sound signal will always be guaranteed Using LAN and NY select ON or OFF and confirm with Y7 5 9 Standby brightness level setting The menu lets you set the brightness level when the thermostat is in standby mode Using or 7 you can select one of the folloiwng levels with gradually increasing brightness e OFF e 1 2 3 4 5 6 7 While scrolling through the values when the selection stops on a certain level the brightness of the display will for approximatel
7. barely sufficient up to 20 a__ GSM signal from 20 up to 50 an_ GSM signal from 50 up to 80 Qual optimum GSM signal over 80 3 Display The touchscreen display allows you to control the system using the following buttons and icons A B Bar 72 ON gt Ju dak OFF OS I H G F E D C Fig 1 Graphical interface and buttons A GSM network signal B Operating mode C Away D Confirm E F Menu navigation and setting parameters G Back H Nighttime reduction I Settings menu L Ring indicating consumption level and energy savings indicator 2 _ mmmu SS VIMAR 3 1 Functions of the buttons increases the numerical values When it disappears from the display it means that the value cannot be increased any more decreases the numerical values When it disappears from the display it means that the value cannot be decreased any more al during navigation it scrolls through the available menus to the right If it disappears then you have arrived at the last of the items that can be scrolled w during navigation it scrolls through the available menus to the left If it disappears then you have arrived at the last of the elements that can be scrolled v confirms the selected option activates the submenu if there is one or displays the next parameter digit After each confirmation the display shows the V icon for approximately 1 s Le back or cancel
8. eeded 6 Cleaning the device The device features a touchscreen display with capacitive buttons and therefore requires you to be gentle during the cleaning phase Avoid using aggressive products Clean the display with a special cloth for cleaning lenses 7 Installation rules Installation should be carried out in compliance with the current regulations regarding the installation of electrical systems in the country where the products are installed 8 Standard compliance LV directive EMC directive Standards EN 60730 2 9 14 A SEES VIMAR VIMAR Viale Vicenza 14 36063 Marostica VI Italy Tel 39 0424 488 600 Fax Italy 39 0424 488 188 800 862307 Fax Export 39 0424 488 709 a 02906 user 01 1407 www vimar com VIMAR Marostica Italy
9. ng mode from Manual to Antifreeze from any other mode to Manual e In air conditioning mode from Manual to OFF from any other mode to Manual Also in this case a report of the general status of the GSM device is sent to the caller number A VIMAR 2 1 Fitting and replacing the SIM card The thermostat can be used with a traditional SIM card ID 000 format for voice SMS traffic data SIMs cannot be used for operating the device To install the SIM card e Disable the PIN code from the SIM card install the SIM in a mobile phone and when switching on disable the PIN code prompt e Turn off the power supply to the thermostat 02906 e Remove the front panel by inserting a screwdriver into the slot in the bottom and pushing the release tab upwards and at the same time pull out the front of the product e Insert the SIM card into the SIM holder in the rear of the front panel you have just removed e Fit the front panel back into its original position by hooking it onto the mounting tabs located on the upper side of the part on the wall and then closing the lower part Finally power up the thermostat 1 a VIMAR e The a icon will show the correct installation and the quality of the GSM network blinking switch on phase if the icon is still flashing after a few minutes it means that there is an ERROR so it is necessary to check the SIM card GSM signal not present or insufficient GSM signal
10. tat configuration programming all the temperature control parameters that can also be set locally by the thermostat and configuration of all the functions of the GSM module that instead cannot be programmed locally e Requesting the current operating status of the thermostat for all the various types e Notification of alarms for power supply voltage failure restoration only if configured and paired with users saved in the contacts list e Notification of technical alarms for exceeding the temperature thresholds only if configured enabled and paired with users saved in the contacts list e Receiving SMSs sent by the thermostat as they are not recognized as being in compliance with the commu nication protocol only if configured and paired with users saved in the contacts list Generally the configuration commands do not require confirmation SMSs as instead is the case for the mon itoring commands so in order to have confirmation on successfully setting a parameter you need to query the thermostat about its status Otherwise all the command operations that for example change the active temperature control mode will generate an SMS for notification and confirmation of the operation Using the phone call function which generates a voice call from a recorded user you can obtain information on the general status of the device Associated to the voice call you can also switch the operating state in the following way e In heati
11. tivated in manual mode by touching e The display will show the away temperature setpoint for approximately 2 seconds N x a POLL EN U NA Fig 7 Input in away mode showing the away temperature Activation of this mode is identified by the CP icon above the temperature indicator a POLL e a Y Fig 8 Away Mode To exit and return to Manual mode touch the e button again VIMAR 4 4 Nighttime reduction This is the typical mode to use at night to reduce system consumption significantly In Nighttime reduction mode the device reduces the consumption of the system taking the room temperature to a lower value or higher if on air conditioning than the Manual mode by dir degrees The Nighttime reduction function is done from Manual mode by touching la or remotely The display will show the nighttime reduction setpoint for approximately 2 seconds ICI KA o Y Fig 9 Input in Nighttime Reduction mode showing the reduction set point Activation of this mode is identified by the by icon above the temperature indicator su e L g of HAN H SN Fig 10 Nighttime reduction mode To exit and return to Manual mode touch law again 10 VIMAR 4 5 Antifreeze This mode which can only be activated when the system is operating in heating mode lets you set a minimum temperature value 10 setpoint
12. to avoid damage to the pipework or to keep it from falling below a certain safety level when you are away for lengthy periods in the winter The antifreeze mode is activated directly from the Settings menu see par 5 1 Once activated antifreeze mode is identified by the q icon above the temperature indicator gay or a dy DI Fig 11 Antifreeze mode 11 5 12 VIMAR Settings menu From the settings menu you can configure all the features of the thermostat On the main screen see Fig 1 tap the v icon From the main menu using 4 a and v will display the following flashing symbols in succession which provide access to the corresponding submenus 1 ON OFF operating mode setting 2 ta dl air conditioning heating setting 3 Wa temperature setpoint setting o o 4 F unit of measurement setting 0 5 nalan calibration setting Ba Di 6 external temperature probe setting shown only when the probe is connected 7 ULI E OnOff PID temperature control algorithm setting 8 bEE p buzzer setting 9 St b y brightness of the display on Standby setting 10 H 5 H GSM function setting 11 Info device info 12 p IN lock unlock PIN setting Touching v opens the submenu and then the flashing highlights the parameters of the submenu 5 1 Operating mode setting This menu is used to select the operating mode of the device ON Manual OFF of Antifreeze only if the thermost
13. y 2 s take on the brightness corresponding to the selected level in order to allow the user to check the visual effect Finally tap v to confirm your choice 13 jjz jJj VIMAR 5 10 GSM settings All the GSM functions are set exclusively via a special smartphone App which communicates by SMS with the thermostat and not via the actual thermostat the latter is used to enable all the functions described in paragraphs 5 10 1 and 5 10 2 5 10 1 Switching on off the GSM radio This option is used to switch the GSM radio transmitter on of off for example to check that the thermostat is set only locally and that it cannot be remotely enabled modified by any other configured mobile phone Using 4 a and al select ON or OFF and confirm with v 5 10 2 GSM parameter resetting This menu is for the sole use of the installer 5 11 Info This menu is for the sole use of the installer 5 12 Lock unlock PIN setting This menu lets you add change the password to inhibit use of the thermostat Using or Ul you can set the three digits of the PIN one at a time and then confirm v each set digit N B Having set the PIN return to the main menu the PIN is active after around 30 s If you wish to have free access to the thermostat so without it prompting you for a password it is suf ficient to set the PIN to 000 IMPORTANT Take care to note down the password so that you can use it again for the device when n
Download Pdf Manuals
Related Search