How to fix a chipped or cracked windshield
Contents
1. Touch up if necessary and apply the curing strips Step 9 Move the windshield into direct sunlight Wait five to 10 minutes before removing the curing Strips then scrape off any excess resin Repairing cracks Step by step instructions Step 1 Clean windshield with a dry towel Step 2 Slowly apply resin directly to the crack on the windshield Step 3 Wait five to 10 minutes for the resin to absorb into the crack Step 4 Apply the curing strips and move the vehicle into direct sunlight Step 5 Wait five to 10 minutes before removing the curing strips then scrape off any excess resin Shop our complete selection of seat covers at your local Walmart store or Walmart com Auto Important Wal Mart Disclaimer Proper service and repair procedures are vital to the safe reliable operation of all motor vehicles as well as the personal safety of those performing the repairs and those riding in the motor vehicles Standard safety procedures and precautions including use of safety goggles and other safety equipment proper tools and equipment should be followed at all times to limit the possibility of personal injury or improper service which could damage the vehicle or compromise its safety Personal injury could result from the failure to take adequate safety precautions when repairing or maintaining your vehicle Although this material has been prepared with the intent to provide reliable information no warranty or representation express or2. WHERE AMERICA S LIST How to fix a chipped or cracked windshield Avoid expensive replacement costs by repairing a chipped or cracked windshield on your own Our step by step instructions make it easy Imperfections you can fix on your own In general DIY kits work best on round damage no more than one inch in diameter and cracks no longer than 12 inches These are the most common and easily repaired imperfections Cracks Chips Bull s eyes Stars Before you start Whether you re fixing a chipped or cracked windshield make the repair in the shade Expose it to direct sunlight after the repair is complete so that the resin can cure For best results make the repair soon after the damage occurs and before the break can be contaminated by dirt and water Repairing chips Step by step instructions Step 1 Clean windshield with a dry towel Step 2 Center the ring of the applicator base over the impact point of the break Step 3 Screw the resin chamber into the center ring of the applicator base until it touches the impact point of the break Step 4 Carefully squeeze the resin into the resin chamber Step 5 Screw the pressure driver into the resin chamber to drive the resin into the break Step 6 Unscrew and remove the pressure driver then re insert the pressure driver into the resin chamber to displace any air remaining in the break Step 7 Remove the resin chamber and pressure driver apparatus from the windshield Step 8
3. implied including the warranties of merchantability and fitness for a particular purpose is made as to its accuracy or completeness Neither is any liability assumed for loss or damage of any kind resulting from reliance on this material and Wal Mart shall not be liable for any loss or damage of any kind resulting from reliance on this material Users employ the information contained in this material at their own risk This material is provided only as a helpful guide and does not replace the information and instructions contained in the motor vehicle s owner s manual and product manufacturer s recommendations Users are cautioned to consult the motor vehicle s owner s manual and product manufacturer s recommendations for additional information and instructions Failure to follow the motor vehicle s owner s manual and the product manufacturer s recommendations could result in damage to your vehicle or personal injury
Download Pdf Manuals
Related Search