ML-300ad Jumbo LCD Display Caller ID on Call Waiting
Contents
1. Operation Set Time Date Allows you to set the clock hour and minute and date month and day The clock will also be updated by incoming Caller ID if you have subscribed to Caller ID service The clock is set at 12 00AM 01 01 when ex factory 1 Press DIAL button when SET TIME DATE appears on the LCD The hour digit will blink 2 Press REVIEW Y or REVIEW A button to scroll digits to set the hour After the hour is set press DIAL button to move on to set the minute 3 Repeat step 2 until you have set the hour minute month and day 4 Press DIAL button to save your setting and REVIEW A button to go to the next setting option SET CONTRAST Set Contrast Allows you to adjust the LCD display contrast at 8 different levels It is set at level 4 when ex factory 1 Press DIAL button when SET CONTRAST appears on the LCD 2 Press REVIEW V or REVIEW A button to decrease or increase the LCD display contrast 3 Press DIAL button to save your setting 4 Press REVIEW A button to go to the next setting option SET DIAL VM Set Dial VM Allows you to set your own voice mail access number 1 Press DIAL button when SET DIAL VM appears on the LCD The first digit of the voice mail access number will blink 2 Press REVIEW Y or REVIEW A button to scroll digits to enter the first digit of the access number 3 Press DIAL button to move on to the second2. ML 300ad Jumbo LCD Display Caller ID on Call Waiting Name amp Number 90 Name amp Number Memory Owner s Manual Installation and operation instruction usc gt new DELETE DIALVM WREVIEW A DIAL FLASH XQ Please read this manual carefully before use Keep for your reference Special Features 6 5 x 2 25 Large Liquid Crystal Display displays three full lines of information including time of the call Caller ID Record stores up to 90 Caller ID records each of which up to 14 digits number and 15 characters name Caller ID on Call Waiting allows you to view incoming Caller ID even when you are on the phone The waiting caller s name and number are shown on the LCD display Area Code Setting sets your local area code New Call Light Indicator Green LED lights up steadily when there is a new call Message Waiting Light Indicator Red LED lights up steadily when there are voice mail messages in your mailbox Review Scrolling easily scroll through the Caller ID records Dial Button dials the number shown on the LCD display IMPORTANT Delete Button allows you to delete one or all Caller ID record DIAL VM Button dials to your voice mail access number Languages English Spanish or French display prompts Real Time Clock shows the current time on the LCD display LCD Display Contrast Control allows you t
3. HANDSET Lift the Handset to dial the number 2 If you have pre stored an area code the number format of the Caller ID is adjustable see the Important section on page 12 The LCD display shows PICK UP OR ADJ after you press DIAL button 3 Press DIAL button again to change number format among a 7 digits phone number b 10 digits area code phone number c 11 digits 1 area code phone number 4 Lift the Handset to dial the number shown IMPORTANT a You must pre store an area code before you can adjust the number format Refer to the Set Area Code section on page 8 b If you have set your local area code area code of all incoming numbers will be compared against your pre set local area code to determine if it is a local call c Only the last 7 digits of the incoming number will be shown on the LCD display if it is a local call If it is not a local call 11 digits 1 area code phone number will be shown when dialing back Operation DELETING CALLER ID RECORD When the Caller ID record is full it automatically deletes the oldest Caller ID record as a new call comes in You can also delete individual call or all calls in the Caller ID record To Delete A Caller ID Record 1 While reviewing a Caller ID record press DELETE button and the LCD display shows DELETE CALL 2 Press DELETE button again to delete 2 Delete All Caller ID Records While r
4. connect line cord from your telephone into the jack labeled PHONE at the back of ML 300ad TEL LINE Cord Jack insert one end of the telephone line cord into the jack labeled TEL LINE and the other end into your wall jack DC Jack the AC adaptor must be connected for the ML 300ad to operate Plug the adaptor into the DC 9V jack at the back THE AC POWER ADAPTOR THAT COMES WITH ML 300ad IS REQUIRED FOR THE OPERATION OF THE UNIT HOWEVER IT IS RECOMMENDED TO INSTALL 4 X AAA SIZE BATTERIES TO PREVENT LOSS OF MEMORY WHEN THERE IS A POWER FAILURE Please check to be sure all supplied accessories come with ML 300ad If there is anything missing or visible damage please contact the original place of purchase Do not attempt to operate ML 300ad if it is damaged a ML 300ad unit ipe b Stand studs 2 pcs c AC power adaptor 1 pe d Long phone line cord 1 pc e Short phone line cord 1 pc INSTALLING BATTERIES Please install 4 x AAA batteries alkaline batteries are recommended to retain the Caller ID records and keep real time clock running in case there is a power failure IMPORTANT a Use only fresh batteries of the required size and recommended type b Do not mix old and new batteries different types of batteries standard alkaline or rechargeable or rechargeable batteries of different capacities c When replacing the batteries if you do not install the new batteries within one minute after re
5. digit 4 Repeat steps 2 and 3 until you have entered your voice mail access number You are now ready to dial your voice mail access number by pressing the DIAL VM button 5 Press DIAL button to save your setting and REVIEW A button to go to the next setting option EXIT and press DIAL button to leave the setup menu Note If you want to change your voice mail access number repeat the steps 1 4 Operation CALLER ID MEMORY If you have subscribed to the Caller ID service from your local telephone company your ML 300ad will receive and display incoming caller s name if applicable and number together with the date and time of the call It stores up to 90 records each of which contains up to 14 digit number and 15 character name When the Caller ID memory is full the oldest Caller ID record will be deleted automatically to make room for the new one REVIEWING CALLER ID 1 Press REVIEW Y button to view the Caller ID record from the newest call i e 90 to the oldest 01 2 Press REVIEW A button to view the Caller ID record from the oldest 01 to the newest i e 90 Sequence number of this incoming call It is a new call Time and date when this call was received i It is a waiting call 12 00AM 01 01 CALL 80 NEW P c w 249 342 363 You have new voice mail Caller s number message s Caller s name Note a c In some areas Ca
6. Always remove old or weak batteries They can leak chemicals which can destroy electronic circuits Keep the phone away from excessive dust and dirt which can cause premature wear of parts Wipe the phone with a damp cloth occasionally to keep it looking new Do not use harsh chemicals cleaning solvents or strong detergents to clean the system Modifying or tampering with the phone s internal components can cause a mal function and might invalidate the phone s warranty and void your FCC authorization to operate it If your phone is not performing as it should call someone with qualifications for assistance Manufacturers 1 Year Limited Warranty Who Is Covered You must have proof of purchase to exchange the product A sales receipt of other document showing the date that you purchased the product is considered proof of purchase What Is Covered Coverage begins the day you buy your product For one year thereafter a defective or inoperative product will be replaced with a new renewed or comparable product at no charge to you A replacement product is covered only for the original warranty period When the warranty on the original product expires the warranty on the replacement product also expires What Is Excluded Your warranty does not cover labor charges for installation or setup of the product and adjustment of customer controls on the product product replacement because of misuse accident unauthor
7. PANOL No French and Spanish translations All displayed in English XX TOTAL XX NOU AUCUN APPEL FIN DE LISTE EFF UN APPEL EFF TOUT APPELS DECROCH OU ADJ DECROCH COMBINE COMPOSER AUCUN NOME NOME NON DISP NOME RISERV APPEL NON DISP APPEL RISERV INTERURBAIN ERREUR DONNEE XX TOTAL XX NUE NO LLAMADAS FIN DE LALISTA BORRAR LLAM BORRAR TODO LEVANTE AJUSTAR LEVANTE TELEFON MARCAR NO NOMBRE NOM DESCONOCIDO NOMBRE PRIVADO LLAM DESCONOG LLAMADA PRIVADO LARGA DISTANCIA DATO INCOMPLETO Troubleshooting Symptoms The display is blank The display is faded Caller ID doesn t work Caller ID with Call Waiting is not received No caller s name The New Call Light Indicator green lights up The New Call Light Indicator green doesn t light up if there is new call The Message Waiting Light Indicator red doesn t light up if you have voice messages The Message Waiting Light Indicator red lights up a b Solutions Make sure the AC adaptor is connected to the jack labeled DC 9V at the back of ML 215ad and plugged into a wall socket that is not controlled by a wall switch Adjust the display contrast refer to Set Contrast page 9 Adjust the LCD display contrast refer to Set Contrast page 9 Make sure you have subscribed to the Caller ID service Wait until the phone rings twice before answering a call Make sure telephone line cords a
8. e cord on your telephone into ML 300ad s jack labeled PHONE If you have a telephone answering machine connect a line cord from ML 300ad s PHONE jack to the answering machine LINE jack Connect another line cord from the answering machine PHONE jack to the jack on your telephone Installation CONNECTING THE AC ADAPTOR THE AC ADAPTOR MUST BE CONNECTED FOR ML 300ad TO OPERATE Plug the adaptor s barrel plug into ML 300ad s DC 9V jack and plug the adaptor into a standard AC outlet A The AC adaptor must be a Class 2 Power Source 9V DC 200mA Connected to AC Power Adaptor Connected to the wall jack Connected to telephone PLACING ON THE DESK Insert the slots of the two Stand Studs into the matching tabs on the bottom cabinet respectively Then slide the Stand Studs along the tabs until they are locked to the bottom cabinet MOUNTING ON THE WALL 1 Drill two 1 8 inch diameter holes 5 1 8 inches 130 mm apart into the wall Thread a screw not included into each hole letting the heads extend 1 8 inch from the wall 2 Align the keyhole slots on the bottom of ML 300ad with the mounting screws and slide ML 300ad downward to secure it Operation IDLE MODE When ML 300ad is in idle mode the calls status and clock are shown on the LCD display You have new voice mail message s Real
9. eviewing a Caller ID record press and hold DELETE button for about 3 seconds DEL ALL CALLS appears on the LCD display 2 Press DELETE button again to delete all records CALLER ID ON CALL WAITING If you have subscribed to the Caller ID on Call Waiting service ML 300ad allows you to read the information of the new caller from the LCD display when you are on the phone IMPORTANT If there is more than one phone connected to the line in your house ML 300ad will not receive Call Waiting information when any of the other phones are off hook at the same time 1 When you are on the line and hear a Call Waiting tone the new caller s name and or number appear on the LCD display An icon C W indicates it is a waiting call 12 00AM 01 01 CALL 80 NEW BA 249 342 363 JOHN SMITH 2 Press FLASH button to switch to talk with the new caller and put the first caller on hold 3 Press FLASH button again to resume the phone conversation with the first caller and to put the new caller on hold LCD Prompts ENGLISH SETUP MENU WA SET LANGUAGE SET AREA CODE SET TIME DATE SET CONTRAST SET DIAL VM EXIT AREA CODE TIME DATE CONTRAST DIAL VM TOTAL XX NEW XX NO CALLS END OF LIST DELETE CALL DEL ALL CALLS PICK UP OR ADJ PICK UP HANDSET DIALING NO NAME UNKNOWN NAME PRIVATE NAME UNKNOWN CALL PRIVATE CALL LONG DISTANCE DATA ERROR FRANCAIS ES
10. ized repair or other cause not within the control of ClassCo Inc a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications Incidental or consequential damages resulting from the product Some states do not allow the exclusion of incidental or consequential damages so the above exclusion may not apply to you FOR CUSTOMER SERVICE CALL CLASSCO TOLL FREE 888 252 7726 or visit product support on line at www classco com Copyright 2005 ClassCo Inc All Rights Reserved Sees 0305 Printed in China
11. ller ID information may not be available UNKNOWN NAME or UNKNOWN CALL will be shown on the LCD display in such cases Callers have the option to block their Caller ID information PRIVATE NAME or PRIVATE CALL will be shown on the LCD display in such cases If the area code of a callers number matches your pre set local area code only the last 7 digits will be shown on the LCD display refer to the Set Area Code section on page 8 Operation NEW CALL LIGHT INDICATOR Green When ML 300ad receives a new incoming call the new call icon NEW appears on the LCD display and the New Call Light Indicator Green LED lights up steadily Besides the LCD display shows the information of the new incoming call for about 10 seconds and then returns to the idle mode Note a You or your answering machine must answer the new incoming call only after the first ring Otherwise the information of the new incoming call will not be registered b If the AC adaptor is not connected the New Call Light Indicator will flash every 3 seconds when there is new call not yet reviewed c The New Call Light Indicator does not stop lighting up unless you have reviewed ALL new incoming calls by pressing REVIEW Y or REVIEW A button VOICE MAIL If you have subscribed to Voice Mail service from you local telephone company the Message Waiting Light Indicator lights up steadily when you have
12. moving the old ones you may lose all information stored in your unit d If you do not plan to use your unit with batteries for a month or longer remove the batteries Batteries can leak chemicals that can destroy electronic parts e Dispose of old batteries promptly and properly Do not burn or bury them Installation When the Low Battery icon 14 appears replace the batteries 1 Disconnect the telephone line 2 Open the batteries cover by inserting a sharp object such as a clip or a pencil into the two slots at the top of the battery compartment cover on the bottom of the ML 300ad AAA 4 AAA AAA AAA SEG A i 7 Q 3 Place the new batteries in the compartment following the polarity symbols and marked inside 4 Replace the batteries cover 5 Reconnect the telephone line IMPORTANT When replacing the batteries if you do not install the new batteries within 30 seconds after removing the old ones you may lose all Caller ID records stored in your ML 300ad CONNECTING TOA TELEPHONE AND OR ANSWERING MACHINE After installing 4 x AAA batteries connect one end of the line cord provided into ML 300ad s jack labeled TEL LINE and connect the other end of the line cord into the telephone wall jack Connect the existing lin
13. o adjust the display contrast Wall Mountable allows you to mount your ML 300ad on the wall Backlit LCD Display Note You must subscribe to the Caller ID service from your local telephone company You must subscribe to the Caller ID on Call Waiting service from your local telephone company You must subscribe to the Voice Mail service from your local telephone company to retrieve voice mail messages a THE AC POWER ADAPTOR INCLUDED MUST BE CONNECTED TO OPERATE ML 300ad b 4X AAA BATTERIES ARE RECOMMENDED TO BE INSTALLED TO RETAIN ML 300ad s MEMORY Control Location Installation Message Waiting Light Indicator red LED lights up steadily when you have new voice mail messages New Call Light Indicator green LED lights up steadily when new calls are received Visual Display Panel shows the caller s name and or number incoming call time amp date Call Counter New Call icon NEW and Voice Mail icon M DIAL VM Buttons dials to your voice mail access number DELETE Button deletes Caller ID records REVIEW A REVIEW V Buttons views the Caller ID records 10 11 DIAL Button dials the number shown on the display You also use this button to set language area code time and date and LCD display contrast FLASH Button activates 3 way conference or Call Waiting calls TELEPHONE Jack
14. re connected correctly refer to Connecting to a Telephone and or Answering Machine page 6 Make sure you have subscribed to Caller ID on Call Waiting service Make sure you are using the phone attached to unit when a Call Waiting call is received Make sure any other extension phones is not off hook when the Call Waiting call is received Make sure you have subscribed to the Caller ID service including the CALLERS NAME DELIVERY feature Make sure you have reviewed all the new calls Make sure you have connected the power adaptor properly Make sure you have subscribed to the Caller ID service Make sure you have subscribed to the Voice Mail service Make sure you have connected the power adaptor properly Make sure you have accessed your voice mail message s Care And Maintenance Warranty The following suggestions will help you care for the system so you can enjoy it for years Keep the phone dry If it gets wet wipe it dry immediately Liquids might contain minerals that can corrode the electronic circuits Use and store the phone only in normal temperature envi ronments Temperature extremes can shorten the life of electronic devices and distort or melt plastic parts Handle the phone gently and carefully Dropping it can damage circuit boards and cases and can cause the phone to work improperly Use only fresh batteries of the required size and type
15. time clock Date 12 00AM 01 01 TOTAL 80 NEW 10 You have 80 Caller ID records including 10 calls you have not reviewed yet SETUP MENU There are five options in the setup menu Set Language Allows you to select the LCD display prompts in English Spanish or French Itis set at English when ex factory 1 During idle mode press and hold DIAL button for about 3 seconds The LCD display shows SETUP MENU WA 2 Press REVIEW A button until SET LANGUAGE appears 3 Press DIAL button again The LCD display shows ENGLISH 4 Press REVIEW Y or REVIEW A button to select English French or Spanish 5 Press DIAL button to save your setting and REVIEW A button to go to the next setting option SET AREA CODE Set Area Code Area codes of all incoming calls will be compared with the area code you entered to determine if it is a local call 1 Press DIAL button when SET AREA CODE appears on the LCD The first digit of the 3 digit area code will blink 2 Press REVIEW Y or REVIEW A button to scroll digits to enter the first digit of your area code 3 Press DIAL button to move on to the second digit 4 Repeat steps 2 and 3 until you have entered your local area code 5 Press DIAL button to save your setting and REVIEW A button to go to the next setting option SET TIME DATE Note If you want to change your area code repeat the steps 1 4
16. voice mails in your mailbox and the LCD icon M appears on the LCD display After you have listened to your voice mails the Message Waiting Light Indicator and the LCD icon will turn off To listen to your voice mails press DIAL VM button to dial your voice mail access number The LCD display shows PICK UP HANDSET Then lift the Handset to dial the access number Refer to the Set DIAL VM section on page 9 to set the voice mail access number IMPORTANT a Ifthe AC adaptor is not connected the Message Waiting Light Indicator will flash every 3 seconds when you have new voice mail s b If there is more than one phone connected to the line in your house ML 300ad will not receive Call Waiting information when any of the other phones are off hook at the same time c Ifthe Message Waiting Light Indicator keeps on lighting up and the LCD icon M still appears after you have listened to all your voice mails press DELETE button to turn off the light and the LCD icon Operation LONG DISTANCE CALL If there is a long distance incoming call LONG DISTANCE apears alternatively with the caller s name 12 00AM 01 01 CALL 80 NEW M 249 342 363 LONG DISTANCE DIALING FROM CALLER ID 1 When reviewing a Caller ID record press DIAL button to dial the number shown on the LCD display If the number format of the Caller ID is not adjustable the LCD display shows PICK UP
Download Pdf Manuals
Related Search