Spectra I.R Remote USER MANUAL
Contents
1. www prolight co uk Spectra I R Remote Order code LEDJ90B USER MANUAL Spectra I R Remote Safety instructions WARNING FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START UP CAUTION Keep this equipment away from rain moisture and liquids SAFETY INSTRUCTIONS Every person involved with the installation operation 8 maintenance of this equipment should Be competent Follow the instructions of this manual Before your initial start up please make sure that there is no damage caused during transportation Should there be any consult your dealer and do not use the equipment To maintain the equipment in good working condition and to ensure safe operation it is necessary for the user to follow the safety instructions and warning notes written in this manual Please note that damages caused by user modifications to this equipment are not subject to warranty IMPORTANT The manufacturer will not accept liability for any resulting damages caused by the non observance of this manual or any unauthorised modification to the equipment e Never remove warning or informative labels from the equipment Do not open the equipment and do not modify the equipment Do not expose to flammable sources liquids or gases If the equipment has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediatley The arising condensatio2. DMX value table The SA button is used to set the LED s into sound activated mode This function is unavailable on the Exterior Spectra Series The SL button is used to set the LED s into slave mode The Ss O 19 27 3 4 o 6 ST g and g buttons are used to set the DMX address for the LED s see example below The R G and B buttons are used to set the brightness for the LEDs to change the brightness use the and buttons DMX Address Examples To set the DMX address 245 1 Press the S button so the red LED s come on this means you can now start to set the DMX address 2 Press the 2 button so the green LED s come on this means the first digit 2 the hundreds place setting is successful 3 Now Press the 4 button and the blue LED s will come on this now means that the second digit 4 tens place setting is successful 4 Now Press the 5 button and all of the R G B LED s will come on this means that the final digit 5 units place setting is successful and the full DMX address setting has been changed 5 Now press the DMX MODE button to save the new address into memory To set the DMX address 002 1 Press the S button so the red LED s come on this means you can now start to set the DMX address 2 Press the 0 button so the green LED s come on this m
3. eans the first digit 0 the hundreds place setting is successful 3 Now Press the 0 button and the blue LED s will come on this now means that the second digit 0 tens place setting is successful 4 Now Press the 2 button and all of the R G B LED s will come on this means that the final digit 2 units place setting is successful and the full DMX address setting has been changed 5 Now press the DMX MODE button to save the new address into memory Spectra I R Remote DMX Value Function Table DMX Value Function table CHANNEL FUNCTION Master dimmer 0 100 Strobe 000 slowest to 255 fastest Please note Set the DMX address on each fixture before plugging into the DMX controller Please note The I R Remote is not usable when the fixture s are being controlled by a DMX controller Please note The maximum transmitter distance is 10M Please make sure that you have the I R remote aimed directly at each fixture to be programmed Please note If you do not press the DMX MODE button after you have changed the DMX address when you power down the fixture it will lose the address you have set LR Remote specifications Transmitting IR signal distance 10M maximum Selectable functions including RGB dimming Built in programmes Auto run Flash speed Slave and DMX mode Power supply DC 3V Dimensions 85 x 52 x 6mm LxWxH Weight 20g
4. n might damage the equipment Leave the equipment switched off until it has reached room temperature If your product fails to function correctly discontinue use immediately Pack the unit securely preferably in the original packing material and return it to your Prolight dealer for service e Repairs and servicing must only be carried out by a qualified technician THIS UNIT CONTAINS NO USER SERVICEABLE PARTS e WARRANTY One year from date of purchase OPERATING DETERMINATIONS If this equipment is operated in any other way than those described in this manual the product may suffer damage and the warranty becomes void Spectra I R Remote Introduction Button functions The BLACKOUT button is used to set the LED s into the power on or off modes The AR button is used to set the LED s into the auto run mode The S PR button is used to set the LED s to run the built in programmes Built in programme selection 7 colour selection colour changing and colour fade Choose between the 9 built in programmes by pressing the and buttons The FL button is used to set the LED s to flash on and off to change the flash frequency use the and buttons The SP button is used to set the run speed this button is available only in the colour change or colour fade modes To change the speed use the and buttons The D button is used to set the LED s into DMX mode See
Download Pdf Manuals
Related Search