MAL 2227-018 - REV00 - produktinfo.conrad.com
Contents
1. MAL 2227 018 G Safety directions Please read this information carefully before installing or using this product Please keep this user manual for further Mounting instruktiones reference 1 The lamps may only be installed by authorized and qualified technicians according the valid regulations for electrical installation The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light 3 Maintenance of the lights is limited to the surfaces When doing this no moisture must come into contact with any areas of the terminal connections or mains voltage control parts 4 Attention Before starting the installation work make sure that the mains power line is voltage free turn off safety cutout or unscrew the protection fuse The switch must be OFF 5 The lights have a protection class rating of IP44 and are solely intended for use in interior areas of private households 6 X The symbol of the crossed out garbage can on the product or the packaging means that the product must not be disposed with ordinary household waste At the end of its useful life the product must be returned to a point of acceptance for the recycling of electric and electronic device Please ask your local municipality for the point of acceptance 7 Safety class II E This light is specially insulated and must not be connected to an earthed conductor 8 Description of the supply terminals L Phase N Neutral2. conductor 9 Only the included individual parts may be used otherwise any and all guarantee claims will expire 10 Protective covers and end covers for mains voltage control parts must always be mounted 11 All included individual parts and attachments must be mounted 12 Please make sure that no cables get damaged during the installation work 13 Attention During operation lamp parts and illuminants can reach temperatures of more than 70 C Do not touch during operation 14 Do not look directly into the light source illuminant LED etc 15 The illuminant can not be replaced 16 This lamp is not suitable for dimmers and electronic switches 17 Connecting this lamp to an external motion detector can lead to failures of the energy saving illuminant and or the motion detector 18 LED colour deviation when using different chargers may occur The light colour and luminous strength of the LED s can also change as a result of battery life span level No Dat 0 0 1 0 2 IP X4 IP X8 3 IP XO IP X8 MAL 2227 018 Pagela LT Revision 00_05 2014
Download Pdf Manuals
Related Search