NETS ME Price Computing Scale Short User
Contents
1. 255 are available 7 Peel Off Threshold 7 8 Select Label Format Press Enter key 8 Select Label Format Select label format and press Enter key refer to the APPENDIX 8 Select Label Format 7 9 Select Printing Item Press Enter key 9 Select Printing Item 31 Page Adam Equipment Company 2010 Enter yes Y or no N 1 Pack On Date Y Enter yes Y or no N 2 Shelf Life Y Enter yes Y or no N 3 Plu Number Y After group code is set to Y each group code of PLU is printed individually group code is set to N a common group code is printed which has been set in 5 2 Select Function Select group code Enter yes Y or no N 4 Group Code Enter yes Y or no N P795 5 Barcode TY 32 Page Adam Equipment Company 2010 Enter yes Y or no N 6 Weight Enter yes Y or no N 7 Unit Price Enter yes Y or no N 8 Total Price Enter yes Y or no N 9 4 Digit Year Enter number 1 or 2 1 Printing 1 line of store name 2 Printing 2 lines of store name 0 No store name 33 Page Adam Equipment Company 2010 Enter 1 or 2 1 1 line of commodity name 2 2 lines of commodity name Enter yes Y or no N Ingredients 12 Ingredient Enter yes Y or no N Enter yes Y or no N and press Enter key Enter yes Y or no N and press Enter key 34 Page Adam Equipment Company 2010 7 10 Select Printing Speed Press Enter key 10 Select Print2. Y key RS 232C Test Ready Test OK is displayed when RS 232C works properly otherwise Connection Error is displayed when an error occurred RS 232C Test Test OK Press ESC key to exit 8 1 5 Printer Press 1 for a chess printing and 2 for a continuous printing in continuous printing pressing C key stops the printing 1 Print Chess 2 Continuous Printing Press ESC key to exit 8 1 6 Sensor Test The outputs of the sensors are indicated peel off sensor indicates a high value when a label blocks the sensor a low value when no label at the front of the peel off sensor Gap sensor indicates a high value when a label with backing paper stand in the gap sensor a low value is indicated at gap of a labels between label and label Recommended sensor indications Peel off sensor No label gt more than 200 With label gt less than 70 Gap sensor In gap gt less than 60 Out of gap gt more than 120 Gap Sensor Peel Off Sensor Press ESC key to exit 39 Page Adam Equipment Company 2010 8 1 7 Sensor Cal The levels of the gap sensor and the peel off sensor are calibrated automatically Press number 3 key scale feeds labels and displays medium values Gap Sensor Peel Off Sensor Press ESC key to exit 1 Analog 2 Key Board 3 Display 4 RS 232C 8 2 Print PLU PLUs which assigned in starting No to End No are printed Enter starting PLU No and press Enter key P82 1 Start P
3. SPEED key direct or by enter PLU number and press PLU key indirect Put commodity Apple on the platter and press X key Enter PLU Enter PLU APPLE 1 99 Multiply 0 X Price 0 00 11 Page Adam Equipment Company 2010 Enter number of labels for example 5 1 99 Multiply 5 X Price Press PRINT key scale prints a label when each pressing PRINT key 7 96 Number of Labels X Price 9 95 12 Page Adam Equipment Company 2010 9 SET MODE Set mode consists of 8 subsidiary mode in the set mode please take out PLU card in the key board V key is used to move to next mode Enter key is used to entering data ESC key is used to escape of current using mode and SET key is used to return to the normal mode Press SET key See Page 14 See Page 16 7 D a See Page 16 See Paae 21 See Page 21 See Page 26 7 key Ea ee a 8 UTILITY See Page 28 See Page 37 13 Page Adam Eguipment Company 2010 1 EDIT PLU Enter PLU number available numbers are 0 999 999 and press Enter key Prol 1 PLU 0 PLU No Select 1 By Weight or 2 By Count And press Enter Key PLU 1 PLU Type 1 By Weight 2 By Count Enter commodity name and press Enter key Max 56 characters x 2 lines are available for one line of commodity press Enter key again to skip second line PLU 2 Commodity Name 1 Tenderloin Enter group code
4. and press Enter key numbers 0 99 are available Group codes are used to grouping PLUS by categories of commodities PLU 3 Group Code Enter UPC code and press Enter key numbers 0 999 999 are available bar code PLU 4 UPC Code 14 Page Adam Equipment Company 2010 Enter unit price and press Enter key PLU 5 Unit Price Enter cook by date and press Enter key 0 366 days are available PLU 6 Cook By Date Enter shelf date and press Enter key 0 366 days are available PLU 7 Shelf Life Enter ingredients 0 9 and press Enter key at the each ingredient Max 56 characters x 10 lines are available ingredient can be printed at the label length 60 mm or longer Pressing SAVE key finishes edit PLU PLU 9 Ingredient 1 at the any entering of ingredient Repeat steps to enter another PLU or press ESC key to the next mode To return to the normal mode P1 0 2 press SET key PLU 0 PLU NO 15 Page Adam Equipment Company 2010 2 EDIT SPEED KEY Press Enter key Press Speed Key Press one of speed keys speed key number is shown on the unit price display and PLU number is shown on the total price display enter PLU number which will be assigned Speed Key No 1 Assigns PLU No 123456 Press SAVE key to store repeat steps to enter other speed keys or press ESC key to exit next mode Press Speed Key 3 EDIT MASTER FILES 3 1 Edit Store Name 3 Edit Master F
5. counts higher or lower counts is a mainly load cell defective but rarely Analog board on the main board may be affected when zero count is an out of range of 7 000 20 000 firstly replace the load cell and then Analog board may be replaced And a stable A D count is recommended 2 count at an indicated value as a stable A D reading if count is unstable or fluctuated replace the Analog board first and then load cell 37 Page Adam Equipment Company 2010 Analog test Press ESC key to exit 8 1 2 Key board Each code of the key matrix is displayed refer to below table PLU KEY CODE 31 25 25 25 25 26 26 26 26 26 26 26 1 6 7 8 9 0 1 2 3 4 5 6 31 26 26 26 27 27 27 27 27 27 27 27 2 FA 8 9 0 1 2 3 4 5 6 7 31 27 27 28 28 28 28 28 28 28 28 28 3 8 9 0 1 2 3 4 5 6 7 8 31 28 29 29 29 29 29 29 29 29 29 29 4 9 0 1 2 3 4 5 6 7 8 9 31 30 30 30 30 30 30 30 30 30 30 31 5 0 1 2 3 4 5 6 7 8 9 0 NUMERIC KEY CODE 12 13 14 19 23 7 8 9 18 22 4 5 6 17 21 1 2 3 16 20 0 10 11 15 Press ESC key to exit 8 1 3 Display All numeric displays are checked by counting 00000 99999 continuously Display test Press ZERO key to exit 38 Page Adam Equipment Company 2010 8 1 4 RS 232C Connect pin 2 amp pin 3 of the RS 232C connector located on the power panel RS 232C interface circuit of the scale is checked press
6. EE ADAM i Adam Equipment NETS ME Price Computing Scale Short User LL TTTTI FHH HHHH MOTT Tt th Specifications are subject to change without notice to improve 1 Page Adam Equipment Company 2010 Thank you for the choosing our label printing scale NETS we are always trying to serve you with better quality as a reliable weighing instrument and enhanced features supporting various kinds of applications TABLE OF CONTENTS 1 SPECIFICATIONS 2 2 OPTIONS 2 3 PRECAUTIONS 3 4 OVERVIEWS en ae re sl cepa r 3 5 INSTALLATION 5 6 KEYBOARDS AND FUNCTION 5 7 THE DESIGNATORS 6 8 THE SELLING MODE 7 9 THE SET MODE 13 10 THE OTHERS ii 42 11 SAMPLE LABEL FORMAT Ee ee 44 1 SPECIFICATIONS Model NETS Maximum capacity 6kg 15kg Minimum graduation 2g 5g Maximum Tare Full Tare Internal res
7. ESC key twice to the next 123456 XXXXXX Edit Date Time Time HH MM SS 5 SELECT FUNCTION 5 1 Minimum Weight of Auto Printing Press Enter key 1 Minimum Weight of Auto Printing 21 Page Adam Equipment Company 2010 Enter motion band of auto printing and press Enter key 1 Minimum Weight of Auto Printing 5 2 Select Group Press Enter key 2 Select Group Select group code and press Enter key codes 0 99 are available 2 Select Group 5 3 Select Operator Press Enter key 3 Select Operator Select operator code and press Enter Key codes 0 99 are available 3 Select Operator 22 Page Adam Equipment Company 2010 5 4 Select Scale Press Enter key ra 4 Select Scale Select scale code and press Enter key codes 0 99 are available P54 1 4 Select Scale 5 5 Select Date Format Press Enter key 5 Select Date Format Select date format and press Enter key 1 YY MM DD 2 MM DD YY 3 DD MM YY 5 6 Select Sale Message Press Enter key 6 Select Sale Message 23 Page Adam Equipment Company 2010 Select sale message code and press Enter key codes 0 99 are available 6 Select Sale Message 5 7 Select EL On And Off Press Enter key 7 EL On And Off Select 1 or 2 default setting is 2 and press Enter key 1 Always On 2 PLU Call On 5 8 Select Add Printing Press Enter key 8 Select Add Printing Select 1 or 2 default setting is 2 and press Ente
8. L BY 870 Store Name Linet Store Name Line2 58 40 Format Number 43 Commdity Name Line1 Commdity Name Line2 PACKED ON 58 50 Format Number 50 Commdity Name Line1 Commdity Name Line2 WEIGHT Ingredient Line 1 05 10 02 05 20 02 5 015 Ingredient Line 2 SELL BY tore Name Line 1 Ingredient Une 3 pin oes ride JN wil UNIT PRICE l I 1280 s 812345 08704 Store Name Line2 05 10 2002 05 20 2002 PACKED 58 60 Format Number 61 MOER LL Commdity Name Line1 Commdity Name Line2 Ingredient Linet Ingredient Line2 58 Ingredient Line3 Ingredient Line4 Ingredient Line5 Ingredient Line6 Ingredient Line7 Ingredient Line8 BY UNIT PRICE Store Name Line1 Store Name Line2 1 WEIGTH 44 Page Store Name Linel Store Name Line2 70 Format Number 70 Commdity Name Line1 Commdity Name Line2 UNIT PRICE WEIGHT 1280 680 8704 PRICE 0 ot 2002 20 ok 2002 PACKEDON SELL BY Store Name Line1 Store Name Line2 Adam Equipment Company 2010 WARRANTY INFORMATION Adam Equipment offers Limited Warranty Parts and Labour for the components failed due to def ects in materials or workmanship Warranty starts from the date of delivery During the warranty period should any repairs be necessary the purchaser must inform its s upplier or Adam Equipment Company The company or its authorised Technician reserves the right to repair or replace the components at any of i
9. LU No Enter end PLU No and press Enter key 5 End PLU No 40 Page Adam Equipment Company 2010 8 3 Trans data PLU data of the scale is transfer to the other scale Scale to Scale Connect RS 232C cable between two scales and press Enter key to transfer Transmit Data Press ESC key to exit 8 4 Del Account Press Enter key account data is deleted display 1 Self Test 2 Print PLU 3 Trans Data 4 Del Account Press ESC key to exit 41 Page Adam Equipment Company 2010 10 THE OTHERS 1 CHANGING LABEL ROLL 42 Page Adam Equipment Company 2010 2 CLEANING THERMAL PRINT HEAD 43 Page Adam Equipment Company 2010 11 SAMPLE LABEL FORMAT 58 30 Format Number 30 Commandity Line u 10200 62010 m m 8704 PACKEDON SELLBY WEIGHT UNTPACE PRICE Store Name Linet Store Name Line2 58 40 Format Number 42 Commdity Name Line1 inored SO Line 1 Ingredient Line 2 Ingredient Line 3 12 04 345 087 05 10 2002 05 20 2002 PACKEDON 870 tore Tare tee tore Name Line 1280 680 58 60 Format Number 60 Commdity Name Line1 Commdity Name Line2 Ingredient Line1 Ingredient Line2 Ingredient Line3 Ingredient Line4 Ingredient Line5 at ka 12345 087 10 01 2002 20 Se 2002 PACKEDON SELL BY Store Name Line1 Store Name Line2 58 40 Format Number 40 or 1 Commdity Name Line1 Commdity Name Line2 680 MU 05 10 2002 05 20 2002 PACKEDON SEL
10. Page Adam Eguipment Company 2010 Enter group name and press Enter key repeat steps to entering another group or press ESC key twice to exit 2 Edit Group Vegetable 3 6 Edit Operator Registration Press Enter key 6 Edit Operator Enter operator code and press Enter key 6 Edit Operator Enter name of operator and press Enter key Max 10 characters x 32 operators 5 Edit Operator Susie Repeat steps to enter another operator or press ESC key twice to the next 6 Edit operator Linda 19 Page Adam Eguipment Company 2010 3 7 Edit Sale Message Registration Sale message is an advertising which can be displayed on the message display Press Enter key 7 Edit Sale Message Enter sale message code and press Enter key 7 Edit Sale Message Enter sale message and press Enter key 7 Edit Sale Message Have a Nice Day Repeat steps to enter another sale message or press ESC key twice to the next mode Pressing SET key enables to return to the normal mode at here 7 Edit Sale Message 20 Page Adam Equipment Company 2010 4 EDIT DATE TIME Press Enter key 4 Edit Date Time Enter time and press Enter key time format should be HH MM SS 123456 XXXXXX at this step Edit Date Time Time HH MM SS Enter date by format YY MM DD formats DD MM YY and P4 2 120910 120910 MM DD YY are available in normal ti d k k ba Edit Date Time Date MM DD YY Press
11. Speed Select printing speed 1 60mm sec 2 80mm sec 3 100 mm sec and press Enter key 1 Low 2 Medium 3 High 7 11 Set Printing Contrast Enter value between 0 400 and press Enter key bigger value has a higher contrast a value 45 is fixed at high speed 11 Set Print Brightness Press ESC key to exit 7 12 Set Number of Label Press Enter key 12 Set Number of Label 35 Page Adam Equipment Company 2010 Enter value between 1 5 and press Enter key 12 Set Number of Label 7 13 Gab Sensor Sensitivity Press Enter key 13 Gab Sensor Sensitivity Select 1 Low 2 Medium 3 High and press Enter key 1 Low 2 Medium 3 High 7 14 Select Subtotal Label Press Enter key 14 Select Subtotal Label Select Subtotal Label 14 Select Subtotal Label Press ESC key to exit 36 P age Adam Equipment Company 2010 8 UTILITY Press Enter key 8 Utility 1 Self Test 2 Print PLU 3 Trans Data 4 Del Account 8 1 Self Test Press A V key to switch the menus 1 Analog 2 Key board 3 Display 4 RS 232C 5 Printer 6 Sensor Test 7 Sensor Cal 8 1 1 Analog A D count is displayed a calibrated count is displayed on the weight display a raw count is displayed on the unit price display zero value is displayed on the price display In the Analog test zero value span value and stability of the A D converter are tested the zero value on the price display is recommend 7 000 20 000
12. duce hazardous substances harmful to our health or the environment as listed in Directive 2002 95 EC or amending legislation Battery disposal in Landfill Sites is more regulated since July 2002 by regulation 9 of the Landfill E ngland and Wales Regulations 2002 and Hazardous Waste Regulations 2005 Battery recycli ng has become topical and the Waste Electrical and Electronic Equipment WEEE Regulatio ns are set to impose targets for recycling ADAM EQUIPMENT is an ISO 9001 2008 certified global company with more than 35 years experience in the production and sale of electronic weighing equipment Adam products are predominantly designed for the Laboratory Educational Medical retail and Industrial Segments The product range can be described as follows Analytical and Precision Balances Compact and Portable Balances High Capacity Balances Moisture analysers balances Mechanical Scales Counting Scales Digital Weighing Check weighing Scales High performance Platform Scales Crane scales Medical Scales Retail Scales for Price computing For a complete listing of all Adam products visit our website at www adamequipment com Copyright by Adam Equipment Co Ltd All rights reserved No part of this publication may be reprinted or translated in any form or by any means without the prior permission of Adam Equipment Adam Equipment reserves the right to make changes to the technology features specificat
13. ed directives Electro Magnetic Compatibility Directive 2004 108 EC Low Voltage Directive 2006 95 EC Adam Equipment Co Ltd Bond Avenue Denbigh East Milton Keynes MK1 1SW United Kingdom FCC COMPLIANCE This equipment has been tested and found to comply with the limits for a Class A digital dev ice pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial envi ronment The equipment generates uses and can radiate radio frequency energy and if no t installed and used in accordance with the instruction manual may cause harmful interferenc e to radio communications Operation of this equipment in a residential area is likely to cau se harmful interference in which case the user will be required to correct the interference at his own expense Shielded interconnect cables must be employed with this equipment to insure compliance wit h the pertinent RF emission limits governing this device Changes or modifications not expressly approved by Adam Equipment could void the user s authority to operate the equipment WEEE COMPLIANCE te Y Sealed Lead Acid bs A aie recycled PES s Properly Any Electrical or Electronic Equipment EEE component or assembly of parts intended to be incorporated into EEE devices as defined by European Directive 2002 95 EEC must be recy cled or disposed using techniques that do not intro
14. iles Press Enter key 1 Edit Store name 16 Page Adam Equipment Company 2010 Press Enter key and enter store name 3 lines of store name is available Max 56 characters x 3 lines Edit Store Name 1 The World Shopping Center Press Enter key and enter 2nd line of store name or press ESC key to skip 2 3 lines of store name Edit Store Name 2 3 2 Non PLU Name Non PLU Name is used to store commodity name not recorded in PLU Press Enter key Enter commodity name lt USE gt In sales mode enter unit price and put a weight on the platter Press Enter key Non PLU Name APPLE 3 3 Non PLU Group Code Non PLU Group Code is used to store Group Code not recorded in PLU Press Enter key 3 Non PLU Group Code 17 Page Adam Equipment Company 2010 Enter Group Code lt USE gt In sales mode enter unit price and put a weight on the platter Press Enter key 3 Non PLU Group Code 3 4 Non PLU Item Code Non PLU Item Code is used to store item code not recorded in PLU Press Enter key 4 Non PLU Item Code Enter Item Code lt USE gt In sales mode enter unit price and put a weight on the platter Press Enter key 4 Non PLU Item Code 3 5 Edit Group Group is used to managing PLUs by categories of commodities for examples meet fruit and vegetable Press Enter key P35 5 Edit Group Enter group code and press Enter key P35 1 2 Edit Group 18
15. ions and design of the equipment without notice All information contained within this publication is to the best of our knowledge timely complete and accurate when issued However we are not responsible for misinterpretations which may result from the reading of this material The latest version of this publication can be found on our Website www adamequipment com
16. lues 0 99 are available 3 Set Label Gap 7 4 Select Peel Off Sensor Peel off sensor detects a label peeled or remained on the peel off bar after enabling scale dose not print label to prevent labels jammed Press Enter key 4 Select Peel Off Sensor Select disable or enable and press Enter key 1 Disable 2 Enable 29 Page Adam Equipment Company 2010 7 5 Adjusting Label End Adjustment of label end adjusts the attaching surface of the label on the peel off bar properly a wide surface makes not easy to label taken a lacked surface gives easy falling down of the label while adjusting label end printing position is also adjusted on the label Press Enter key 5 Adjusting Label End Enter adjusting value and press Enter key values 0 99 are available 5 Set Label Adjust 7 6 Gap Sensor Threshold Level Manual Setting Sensor calibration written in 8 7 Utility Sensor calibration calibrates gap sensor and peel off sensor automatically but this setting gives a manual calibration by entering threshold level Prior to setting the min amp max levels must be read in 2 6 Self Test Sensor Test Press Enter key 6 Gap Threshold Enter threshold level middle level and press Enter key 6 Gap Threshold 30 Page Adam Equipment Company 2010 7 7 Peel Off Sensor Threshold Level Manual Setting Press Enter key Same as 7 6 7 Peel Off Threshold Enter threshold level and press Enter key levels 0
17. mmodities PLU key PLU used to call indirect PLU 5 Page Adam Eguipment Company 2010 Name of Key Functions Multiple key used to printing of same labels For key used to selling by number Feed key Used to feeding a label or ticket Print key PRINT Used to printing label or ticket VEEL 7 THE DESIGNATORS Designators Functions ZERO It indicates scale is on centre of zero STABLE It indicates scale is stable NET It indicates tare has been set SHIFT It indicates shift function in PLU programming CAPS LOCK It indicates function of entering capital letter INS It indicates function of insertion COM It indicates scale is under communication AUTO It indicates automatic printing mode SAVE It indicates PLU saving mode SALE It indicates sale mode FUNC It indicates scale is under function mode 6 Page Adam Equipment Company 2010 8 SELLING MODE Selling mode consists of 4 subsidiary mode refer to the listed page for the details 1 SELLING BY WEIGHT 2 SELLING BY COUNT 3 PRICE ADD UP N SeePaaetg Paae 10 4 MULTIPLE LABELS See Paae 11 Note Scale dose not print out any label or ticket unless PLU has been programmed 7 Page Adam Eguipment Company 2010 refer to the EDIT PLU of the SET MODE 1 SELLING BY WEIGHT Weighing normal mode Enter PLU Enter PLU by pressing one of SPEED key direct or by en
18. nting Group Total Accept Group Number 26 Page Adam Eguipment Company 2010 Repeat steps to print another group or press ESC key to exit 6 2 Account PLU Press Enter key Enter PLU number and press Enter key PLU total is printed Repeat steps to print another PLU or press ESC key to exit 6 3 Account Daily Press Enter key 27 Pa ge Be Printing Group Total Accept Group Number 2 Account PLU Printing PLU Total Accept PLU Number Printing PLU Total Accept PLU Number 3 Account Daily Adam Equipment Company 2010 Enter a date which will be printed and press Enter key Repeat steps to get another daily total or press ESC to exit 7 MODIFY LABEL 7 1 Select Label or Ticket Press Enter key Enter number 1 for label printing or 2 for ticket printing and press Enter key For the ticket printing remove the label bobbin on the cartridge and fit the ticket paper roll 7 2 Setting Label Length Press Enter key 28 Pa 00 e Printing Daily Total Accept Date Printing Daily Total Accept Date 1 Select Label or Ticket 1 Label 2 Ticket 2 Set Label Lensth Adam Eguipment Company 2010 Enter label length and press Enter key Available label lengths 30mm 35mm 40mm 60mm 80mm 100mm 2 Set Label Length 7 3 Setting Label Gap Press Enter key Label gap is a clearance of labels 2mm 3 Set Label Gap Enter gap value of labels and press r key va
19. olution 1 60 000 Widths mm Paper Label printing 60 58 56 Available Labels mm 35 40 60 80 Label roll size mm Max 120 1 200 labels at 40mm length Printing Speed mm 80 100 Speed PLU keys 120 PLU memory Standard Memory 0 5MB 1000 labels at 500 characters Extended Memory 1MB Numeric Displays digit LED Price 8 Weight 5 Unit price 7 Message Display LCD Graphic 256 x 32 pixels Platter size mm inch 415 16 3 x 260 10 2 Product size mmi inch W460 18 1 x D440 17 3 x H470 18 5 Power source AC 100 240 50 60 Hz Free Voltage Power consumption Printing Approx 100W max Stand by Approx 40W Extended PLU memory Weight conversion kg lb conversion 2 Page Adam Eguipment Company 2010 3 PRECAUTIONS Place the scale on a flat and rigid desk that is free of vibrations Place the scale out of direct sunlight Do not use radio devices which emits strong electromagnetic fields near by Do not apply sudden impact to the platter Always level the scale Do not spill the water to the scale Do not use cleaners which includes solvent or sinner Scale should be calibrated by authorized person prior to being to used Turn on the scale 10 minutes before using 4 OVERVIEWS Cartridge Oo NE Display Platter 3 Page Adam Equipment Company 2010 Displays WEIGHT ko UNIT PRICE Rika TOTAL PRICE R Max 6 16 kg Min 0 04kg e 2 6g T 16kg SA1481 Key Board B 1 11 Ale wlelel
20. r key 1 Disable Print 2 Enable Print 24 Page Adam Equipment Company 2010 5 9 Scale Time The time entered will be add to the current time and the added time will be printed lt Notice gt P7 9 15 Current time must be set Y Press Enter key Select scale time and press Enter key codes 0 24 are available 5 10 Use Speed Key 120Ea Press Enter key Select 1 or 2 default setting is 1 and press Enter key 5 8 Select Bar Code Press Enter key 25 Page 9 Scale Time ol 2 10 Use Speed Key 120Ea 1 Use 60 Ea 2 Use 120 Ea 11 Select BarCode Adam Equipment Company 2010 Select barcode and press Enter key 1 UPC A 2 UPC B 3 EAN 8 4 EAN 13 5 2of5 A default format of EAN A consists of group code DD 2 digit item code IIIII 5 digit and price PPPPP 5 digit item code can be varied within 6 digit and price can be varied within 7 digit if price is greater than the digit of price set then 0 will be printed on the price column Ex 1 7 digit price DD III PPPPPPP or D III PPPPPPP or III PPPPPPP Ex 2 6 digit price DD III PPPPPP or D Il PPPPPP or III PPPPPP Ex 3 Printing weight instead of price on the bar code DD III WWWWW Enter barcode format and press Enter key Default Barcode Format DDIIIIPPPPP Press ESC key to exit 6 ACCOUNT 6 1 Account Group Press Enter key 1 Account Group Enter group number and press Enter key group total is printed Pri
21. rfvluli oe Jiz s O Connections Power Switch o ec a NEE Fuse Holder External Keyboard 4 Page Adam Equipment Company 2010 5 INSTALLATION Place the scale on a flat and rigid desk Insert two display wire connectors between displays and scale Erect the display pole into display bracket Arrange the display wire and block the bottom of bracket with plate Fasten display bracket and plate with 4 x M3 screws AE a rae 6 KEYBOARD AND FUNCTIONS Name of Key Functions Numeric keys used to enter unit price and programming data Clear key used to clear unit price and programming data Zero key used to correct weight display to zero 0 000 when scale has been drifted Tare key used to set or remove tare container weight TARE after tare set scale displays net weight and the designator NET is turned on Auto key used to set scale to automatic printing mode AUTO scale prints automatically after weight stable the designator AUTO is turned on while this function is activated key works by toggle Save key used to save current PLU the designator SAVE is turned on SAVE while this function is activated key works by toggle je YALE Set key used to enter to set mode toggle key o m Function key FUNC Escape key used to cancel of previous transaction s escape from each menu of the set mode m U o Add up key used to add up of co
22. ter PLU number and press PLU key indirect 0 000 5 90 FILLET Put commodity Fillet on the platter and press PRINT key While the designator AUTO is turned 1 200 on scale prints automatically FILLET Remove commodity on the platter While the designator SAVE is turned on scale saves current PLU 0 000 00 Enter PLU 8 Page Adam Equipment Company 2010 Weighing normal mode Enter PLU Enter PLU by pressing one of SPEED key direct or by enter PLU number and press PLU key indirect 0 000 0 25 SWEET CANDY Press FOR key SWEET CANDY Enter number of commodity Candy and PRINT key SWEET CANDY Weighing mode Enter PLU 9 Page Adam Equipment Company 2010 3 PRICE ADD UP Weighing normal mode Enter PLU Enter PLU by pressing one of SPEED key direct or by enter PLU number and press PLU key indirect 0 000 7 9 TENDERLOIN Put commodity Tenderloin on the platter and press ADD key Remove the commodity Tenderloin and enter another PLU FILLET Put the commodity Fillet on the platter FILLET 10 Page Adam Equipment Company 2010 Press ADD key repeat above steps for add up of commodities or press PRINT key to print for sum total price Notice PRICE ADD UP Functions only by manufacturer set the use of ADD Key 4 MULTIPLE LABELS Weighing normal mode Multiple labels function is suppressed on Ticket Printing version Enter PLU by pressing one of
23. ts workshops depending on the severity of the problems However any freight involved in sending the faulty units or parts to the servi ce centre should be borne by the purchaser The warranty will cease to operate if the equipment is not returned in the original packaging and with correct documentation for a claim to be processed All claims are at the sole discret ion of Adam Equipment This warranty does not cover equipment where defects or poor performance is due to misuse accidental damage exposure to radioactive or corrosive materials negligence faulty installat ion unauthorised modifications or attempted repair or failure to observe the requirements and recommendations as given in this User Manual Additionally rechargeable batteries where su pplied are not covered under warranty Repairs carried out under the warranty does not extend the warranty period Components re moved during the warranty repairs become the company property The statutory right of the purchaser is not affected by this warranty The terms of this warrant y is governed by the UK law For complete details on Warranty Information see the terms an d conditions of sale available on our web site 45 Page Adam Equipment Company 2010 46 Page Adam Equipment Company 2010 CE Manufacturer s Declaration of Conformity This product has been manufactured in accordance with the harmonised European standards following the provisions of the below stat
Download Pdf Manuals
Related Search