Table of Contents Limited Warranty User`s Manual Model FCD1R
Contents
1. of incidental or consequential damages or limitations on how long an implied warranty lasts so the above limitations or exclusion may not apply to you This warranty gives you specific legal rights and you may also have other rights that vary from state to state or province to province How to Obtain Warranty Service Service If service is required do not return the product to your retailer In order to obtain warranty service contact the Consumer Affairs Division at 1 800 323 9005 7 30 AM 5 00 PM Central Standard Time Monday through Friday To assist us in serving you please have the model number and date of purchase available when calling 303 Nelson Avenue Neosho MO 64850 8806 IMPORTANT Do not install this SensorPack Module if its freshness date has expired First Alert is a registered trademark of the First Alert Trust BRK Electronics and SensorPack are Registered Trademarks of BRK Brands Inc2. E E Users Manual First Alert Model FCDiR Replacement Sensor Pack Module For First Alert Carbon Monoxide Alarms Model FCD1 FCD1AC NICO NICOAC FACO FACOAC and BRK Electronics Models BRKDCO BRKCO CO1000B C0O1120B and Family Gard Model GCD1 e 1 year warranty on replacement SensorPack Module Details in this User s Manual e Spanish English Instructions Enclosed BRK Brands Inc 3901 Liberty Street Road Aurora IL 60504 8122 Consumer Affairs 1 800 323 9005 www firstalert com U S Patent 5 603 164 Quantum Group Inc 2004 BRK Brands Inc MO08 0057 001 07 04 All Rights Reserved 0 H29054 85370 Made in Mexico 7 Table of Contents How the SensorPack Module Works 1 How to Install the SensorPack Module 2 Weekly Testing of Your CO Alarm 3 What To Do If Your CO Alarm Sounds 3 Limited Warranty ssscoccexsseocees see ened 4 IMPORTANT YOUR CO ALARM IS NOT A SMOKE ALARM It is designed to detect carbon monoxide from ANY source of combustion It is NOT designed to detect smoke fire or any other gas The unit will not work without a properly installed SensorPack Module The SensorPack Module will only warn of carbon monoxide when installed in a compatible CO Alarm How the SensorPack Module Works The patented SensorPack Module contains two sensor discs which mimic the body s response to CO over time and a sealed batt
3. ED FOR DO NOT RE ENTER THE PREMISES until the Fire Department says the air is clear Have the problem corrected immediately If no one exhibits symptoms of discomfort associat ed with carbon monoxide poisoning simply 2 Operate the Test Silence Test Reset button 3 Turn off appliances or other sources of combustion at once furnace water heater wood coal kerosene burning stove or heater RV or automobile in attached garage etc 4 Immediately get fresh air into the premises 5 Call a qualified appliance technician and have the problem fixed before restarting appliances After the problem has been corrected you may re enter the area On models with a Silence Reset Feature only On Models FACO FACOAC BRKCO and BRKDCO 1 Remove the SensorPack Module and place it where it will be exposed to fresh air while you ventilate your home 2 Once the sensors have reset reinstall the SensorPack Module in the unit and close the drawer all the way Please refer to the User s Manual or call our Consumer Affairs Department 1 800 323 9005 for more information Limited Warranty BRK Brands Inc BRK the maker of First Alert brand products warrants that for a period of one year from the date of purchase this product will be free from defects in material and workmanship BRK at its option will repair or replace this product or any component of the product found to be defective during the warrant
4. ange may be harmful to your hearing When testing step away when the unit starts sounding A CAUTION The Test Silence Test Reset button is the only proper way to test the unit NEVER use vehicle exhaust Exhaust causes permanent damage and voids your warranty If the unit does not test properly 1 Make sure the SensorPack Module is inserted correctly 2 Be sure the unit is clean and dust free 3 Replace the SensorPack Module and test the unit again If there is still a problem do not try to fix the CO Alarm yourself This voids your warranty If the unit is not working properly refer to the Limited Warranty at the end of this manual or call our Consumer Affairs Department at 1 800 323 9005 What To Do If Your CO Alarm Sounds AWARNING Actuation of this device indicates the presence of CO which can be fatal In the Event of an Early Warning CO alarm sounds for 3 5 seconds every 5 minutes 1 Immediately get fresh air into the premises 2 Operate the Test Silence Test Reset button 3 Turn off and inspect the logical sources of carbon monoxide and adjust repair or replace as needed Call a qualified appliance technician if necessary In the Event of a Full Alarm CO Alarm sounds a continuous pulsating alarm 1 If anyone has a headache or an upset stomach call 911 or Fire Department and immediately move to a location with fresh air DO A HEAD COUNT TO CHECK THAT ALL PERSONS ARE ACCOUNT
5. ery that powers the unit When the SensorPack Module is installed in the unit light shines through the sensor discs to a receiver When no CO is present light passes through the discs freely when the sensor is exposed to CO the discs darken If they darken enough a critical amount of light is blocked and the alarm s horn sounds Models NICO NICOAC FCD1 and FCD1AC If the unit alarms and no one is feeling symptoms of CO poisoning you can press the Test Silence Test Reset Button on the unit to quiet the alarm signal Do not remove the SensorPack Module Refer to What To Do If Your CO Alarm Sounds The unit will continue monitoring the air for CO while the sensors clear As long as the CO levels remain below 100 ppm and continue to drop the unit will remain quiet If CO levels rise again or do not drop below 100 ppm the unit will go back into alarm Refer to your CO alarm User s Manual for more information on using the Silence Feature Models FACO and FACOAC If the unit alarms and no one is feeling symptoms of CO poisoning remove the SensorPack Module and place it where it will be exposed to fresh air like on the inside window sill of an open window Continue to ventilate your home while the sensors clear The sensors should clear in 3 5 hours Replace the SensorPack Module in the alarm making sure you close the drawer all the way Test to make sure the CO alarm and SensorPack Module are work
6. ing properly AWARNING Removing the SensorPack Module or opening the drawer will remove your protection For Models FACO and FACOAC always ventilate your home while the sensors clear How To Install a SensorPack Module 1 Cut open the plastic bag and remove the SensorPack Module 2 Pull the drawer on the side of the unit open Insert the white SensorPack Module in the drawer The beveled edge should face in toward unit label should face you IMPORTANT Push the drawer in as far as it will go Make sure there is no gap between the unit and the drawer The unit may beep a few times after you install the SensorPack Module 3 Press the Test Silence button to make sure the CO alarm is working properly A CAUTION Your Carbon Monoxide Alarm comes with a special feature that prevents the drawer from closing if a SensorPack Module is not installed The CO Alarm will not work until a SensorPack Module is installed and the drawer is closed all the way SensorPack Module Installing the SensorPack Module Weekly Testing of Your CO Alarm It is important to test your CO Alarm weekly and after you replace the SensorPack Module Push the Test Silence Test Reset button on the cover until a continuous alarm sounds It should last for 5 20 seconds If the unit ever fails to test properly replace it immediately AWARNING DO NOT stand close to the unit when the unit is sounding Exposure at close r
7. y period Replacement will be made with a new or remanufactured product or component If the product is no longer available replacement may be made with a similar product of equal or greater value This is your exclusive warranty This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable Keep the original sales receipt Proof of purchase is required to obtain warranty performance BRK dealers service centers or retail stores selling BRK products do not have the right to alter modify or any way change the terms and conditions of this warranty This warranty does not cover normal wear of parts or damage resulting from any of the following negligent use or misuse of the product use on improper voltage or current use contrary to the operating instructions disassembly repair or alteration by anyone other than BRK or an authorized service center Further the warranty does not cover Acts of God such as fire flood hurricanes and tornadoes or any batteries that are included with this unit BRK shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty Except to the extent prohibited by applicable law any implied warranty of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty Some states provinces or jurisdictions do not allow the exclusion or limitation
Download Pdf Manuals
Related Search