Weather Forecaster
Contents
1. gt ITE Instruction Manual Weather Forecaster models 75077 75107 E future For of outdoor tempe indoor rature _ 87 CONTENTS Set the Time amp Date 7 Unpacking Instructions 2 Measurement Units 7 Package Contents 2 Placement Guidelines 8 Product Registration 2 Using the Forecaster 9 Features amp Benefits 2 Troubleshooting 9 Features amp Benefits Display 3 amp Maintenance 10 SOUD ees 5 10 Sensor 5 Information 11 Display 6 Customer 5 11 Atomic A 12 Questions Contact Customer Support at 877 221 1252 or visit www AcuRite com SAVE THIS MANUAL FOR FUTURE REFERENCE ACU RITE Congratulations on your new AcuRite product To ensure the best possible product performance please read this manual in its entirety and retain it for future reference Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product Locate the tab and peel off to remove Package Contents 1 Display unit 2 Outdoor sensor 3 Instruction Manual2. PRODUCT MUST BE REGISTERED IMPORTANT warranty SERVICE PRODUCT REGISTRATION SUP RORT to receive 1 year T warranty protection www AcuRite com 2 Features amp Benefits _ OUTDOOR SENSOR 1 Integrated Hanger For easy placement 5 2 Wireless Signal Indicator Flashes when data is being sent to the display unit 3 Battery Compartment 4 A B C Switch ID code that must match display s A B C switch to ensure units synchronize 5 Battery Compartment Cover Features amp Benefits 7 6 15 future FORECAST HIGH future forecast 1 ft 2 7 201 13 ido itdoor temperature _ 12 11 10 3 9 4 5 6 7 8 DISPLAY UNIT 1 Learning Mode Icon 10 Indoor High Temperature Record Disappears after weather forecast Highest temperature recorded since self calibration is complete midnight 2 12 to 24 Hour Weather Forecast 11 Day of the Week Self Calibrating Forecasting pulls data 12 Date from the outdoor sensor to generate your personal forecast 13 Outdoor Low Temperature Record 3 Atomic Clock Signal Strength aa la midnight 4 Atomic Clock Maintains time with split second accuracy and automatically updates for daylight saving time 14 Outdoor High Temperature Record Highest temperature recorded since midnight 15 Outdoor Sensor Signal Strength 5 Selected Time Zone 6 Daylight Saving
3. The above described warranty is expressly in lieu of all other warranties express or implied and all other warranties are hereby expressly disclaimed including without limitation the implied warranty of merchantability and the implied warranty of fitness for a particular purpose Chaney expressly disclaims all liability for special consequential or incidental damages whether arising in tort or by contract from any breach of this warranty Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you Chaney further disclaims all liability from personal injury relating to its products to the extent permitted by law By acceptance of any of Chaney s products the purchaser assumes all liability for the consequences arising from their use or misuse No person firm or corporation is authorized to assume for Chaney any other liability in connection with the sale of its products Furthermore no person firm or corporation is authorized to modify or waive the terms of this paragraph and the preceding paragraph unless done in writing and signed by a duly authorized agent of Chaney This warranty gives you specific legal rights and you may also have other rights which vary from state to state For in warranty claims Chaney Instrument Co 965 Wells St Lake Geneva WI 53147 RITE Weather Temperature Weather Kitchen Clocks Stations amp Humidity
4. Alert Radio Thermometers amp Timers Its more than accurate its ACU RITE AcuRite offers an extensive assortment of precision instruments designedto provide you with information you can depend on to Plan your day with confidence www AcuRite com Chaney Instrument Co All rights reserved AcuRite is a registered trademark of the Chaney Instrument Co Lake Geneva WI 53147 All other trademarks and Printed in China 75077 INST 031715 copyrights are the property of their respective owners AcuRite uses patented technology Visit www AcuRite com patents for details 12
5. caustic cleaners or abrasives Keep away from dust dirt and moisture Clean ventilation ports regularly with a gentle puff of air Outdoor Sensor Care Clean with a soft damp cloth Do not use caustic cleaners or abrasives Specifications Display 3 x AA alkaline batteries Sensor 2 x AA alkaline or lithium batteries DATA REPORTING Outdoor Data 16 second updates Indoor Data 60 second updates FCC Information This device complies with part 15 of FCC rules Operation is subject to the following two conditions 1 This device may NOT cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation WARNING Changes or modifications to this unit not approved by party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equip ment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However There is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or tel
6. Time Indicator 16 Current Outdoor Temperature 7 Display Unit Low Battery Indicator 17 Sensor Low Battery Indicator 8 Current Indoor Temperature 9 Indoor Low Temperature Record Lowest temperature recorded since midnight BACK OF DISPLAY UNIT Ona O N Integrated Hang Hole For easy placement SET Button For setup preferences Button For setup preferences Button For setup preferences F C Button Select temperature units SIGNAL Button Press to manually search for atomic signal Fold out Tabletop Stand Battery Compartment Battery Compartment Cover Set the A B C Switch The A B C switch is located inside the battery compartment It can be set to A B or C However you must select the same letter choices for both the sensor and the display unit in order for the units to synchronize Install or Replace Batteries AcuRite recommends high quality alkaline or lithium batteries for the best product performance Heavy duty or rechargeable batteries are not recommended The sensor requires lithium batteries in low temperature Install Batteries 2 AA batteries conditions Cold temperatures can cause alkaline batteries to function improperly Use lithium batteries in the sensor for temperatures below 4 F 20 C 1 Slide off the battery compartment cover Take note of the A B C switch setting inside the battery compartment 2 Insert 2 x AA batteries in
7. d pressure is tuned in to your location and the unit is ready for superior weather prediction Weather Forecast AcuRite s patented Self Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard It generates a forecast with pinpoint accuracy personalized for your exact location RAIN SNOW SNOW RAIN CLOUDY MOSTLY MIX LIKELY LIKELY LIKELY View the complete list of icons at www AcuRite com acurite icons Troubleshooting If the wireless signal indicator shows no bars e Relocate the display unit and or the outdoor sensor The units must be within 330 ft 100 m of each other No outdoor sensor Make sure both units are placed at least 3 feet 9 m away from electronics that may interfere with the wireless reception communication such as TVs microwaves computers etc T Use standard alkaline batteries lithium batteries in sensor when temperature is below 4 F 20 C Do not use heavy duty or rechargeable batteries NOTE It may take up to 20 minutes for display unit and sensor to synchronize after batteries are replaced Display screen e Check that the batteries are installed correctly Batteries may not working need to be replaced Flashing of the outdoor temperature is generally an indication of wireless interference Outdoor 1 Bring both the sensor and display unit ind
8. ease the SET button again to adjust the next preference The preference set order is as follows TIME ZONE PST MST CST EST AST HAST AKST DST Daylight Saving Time ON or OFF CLOCK HOUR CLOCK MINUTE CALENDAR MONTH CALENDAR DATE CALENDAR YEAR You will automatically exit SET MODE if no buttons are pressed for 30 seconds Enter setup mode at any time by pressing the SET button If you live in an area that observes Daylight Savings Time DST should be set to ON even if it is not currently Daylight Savings Time Select Degrees Fahrenheit or Celsius To select between degrees Fahrenheit F or Celsius C temperature units press the F C button located on the back of the display unit Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product Display Unit Placement Place the display unit in a dry area free of dirt and dust Display unit stands upright for tabletop use or is wall mountable Outdoor Sensor Placement Sensor must be placed outside to observe outdoor conditions Sensor is water resistant and is designed for general outdoor use however to extend its life place the sensor in an area protected from direct weather elements Hang the sensor using the integrated hang holes hanger by using string not
9. evision reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help NOTE The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the user authority to operate the equipment Customer Support AcuRite customer support is committed to providing you with best in class service For assistance please have the model number of this product available and contact us in any of the following ways 877 221 1252 info chaney inst com 24 7 support at www AcuRite com gt Installation Videos gt Register your Product gt Instruction Manuals gt Support User Forum gt Replacement Parts gt Submit Feedback amp Ideas PRODUCT MUST BE REGISTERED IMPORTANT WARRANTY SERVICE PRODUCT REGISTRATION to receive year warranty protection www AcuRite com pRegister a Product ede tae Limited One Year Warranty At AcuRite we proudly uphold our commitment to quality technology Chaney Instrument Co warrants that all prod
10. included to hang it from a suitable location like a well covered tree branch The best location is 4 to 8 feet above the ground with permanent shade and plenty of fresh air to circulate around the sensor Important Placement Guidelines e To ensure accurate temperature measurement place units out of direct sunlight and away from any heat sources or vents e Display unit and outdoor sensor must be within 330 ft 100 of each other e To maximize wireless range place units away from large metallic items thick walls metal surfaces or other objects that may limit wireless communication e To prevent wireless interference place both units at least 3 ft 9 away from electronic devices TV computer microwave radio etc a LEAST 3 ject 9 APART et TT e e 330 feet maximum 100 meters Setup is Complete The sensor will now synchronize with the display unit It may take a few minutes for synchronization to complete Please refer to the troubleshooting section of this manual if anything appears to be functioning improperly OPERATION Using the Weather Forecaster Learning Mode Self Calibrating Forecasting uses a unique algorithm to analyze changes in pressure over a time period called Learning Mode to determine your altitude After 14 days the Learning Mode icon disappears from the display screen At this point the self calibrate
11. oors and remove at least one battery from each temperature Make sure the A B C switch on both units match IS flashing or Reinstall the battery in the outdoor sensor showing dashes Reinstall the battery in the display unit Let the units sit within a couple feet of each other for about 20 minutes to gain a strong connection Weather Forecast icon predicts conditions for the next 12 to 24 hours not current conditions Has Learning Mode icon disappeared from the display unit Learning Mode must complete before forecast and pressure will be accurate Allow unit to run continuously for 33 days Battery removal or resetting the display unit will restart Learning Mode After 14 days forecast should be fairly accurate however Learning Mode calibrates for a total of 33 days Inaccurate forecast Make sure both the display unit and sensor are placed out of direct sunlight and away from any heat sources or vents see page 7 Press the SIGNAL button on the back of the display to Atomic signal or time manually search for the atomic clock signal syncing problems For additional troubleshooting please visit http www nist gov pml div688 grp40 radioclocks cfm Inaccurate temperature If your AcuRite product does not operate properly after trying the troubleshooting steps visit www AcuRite com or call 877 221 1252 for assistance Care amp Maintenance Display Unit Care Clean with a soft damp cloth Do not use
12. ose of batteries in fire as batteries may explode or leak DO NOT mix old and new batteries or types of batteries alkaline standard DO NOT use rechargeable batteries DO NOT recharge non rechargeable batteries DO NOT short circuit the supply terminals 6 Atomic Clock AcuRite atomic clocks use a radio controlled signal RCC to synchronize to the correct time broadcast by the National Institute of Standards and Technology NIST Radio Station WWVB located near Fort Collins Colorado WWVB broadcasts the current time and date with split second accuracy The atomic clock and calendar will maintain the correct time and date and automatically update for daylight saving time to provide the most accurate timekeeping standard possible Please note Signal reception is normally better at night and when the weather is clear The atomic signal generally takes a few hours to synchronize so it is important to manually set the time and date after powering on the display Set the Time amp Date The display unit will automatically start in SET mode after batteries have been installed Enter SET mode at any time by pressing the SET button located on the back of the display unit Once in set mode the preference you are currently setting will blink on the display To adjust the currently selected flashing item press and release the or buttons press and HOLD to fast adjust To save your adjustments press and rel
13. to the battery compartment as shown Follow the polarity diagram in the battery compartment 3 Replace the battery cover set to match display unit a 58 LITHIUM BATTERIES 70 C 158 F ahd 922 1589 ALKALINE BATTERIES 5 Display Unit Setup Set the A B C Switch Install or Replace Batteries Locate the A B C switch inside 1 Remove the battery the battery compartment Set compartment cover the A B C switch to A B or C You must select the same letter choices for both the display unit and the sensor in order for the units to synchronize 2 Insert 3 x AA alkaline batteries into the battery compartment as shown Follow the polarity diagram in the battery compartment 3 Replace the battery cover A B C Switch set to match sensor Install Batteries 3 AA batteries PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS BATTERY SAFETY Clean the battery contacts and also those of the device prior to battery installation Remove batteries from equipment which is not to used for an extended period of time Follow the polarity diagram in the battery compartment Promptly remove dead batteries from the device Dispose of used batteries properly Only batteries of the same or equivalent type as recommended are to be used DO NOT incinerate used batteries DO NOT disp
14. ucts it manufactures to be of good material and workmanship and to be free of defects when properly installed and operated for a period of one year from the date of purchase We recommend that you visit us at www AcuRite com for the fastest way to register your product However product registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty benefits Chaney Instrument Co warrants that all products it manufactures to be of good material and workmanship and to be free of defects when properly installed and operated for a period of one year from the date of purchase Remedy for breach of this warranty is limited to repair or replacement of the defective item s Any product which under normal use and service is proven to breach the warranty contained herein within ONE YEAR from date of sale will upon examination by Chaney and at its sole option be repaired or replaced by Chaney Transportation costs and charges for returned goods shall be paid for by the purchaser Chaney hereby disclaims all responsibility for such transportation costs and charges This ACU 8 warranty will not breached and Chaney will give no credit for products it manufactures which have received normal wear and tear been damaged including by acts of nature tampered abused improperly installed damaged in shipping or repaired or altered by others than authorized representatives of Chaney
Download Pdf Manuals
Related Search