User Manual ()
Contents
1. Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult a service representative for help Properly shielded and grounded cables and connectors must be used in order to comply with FCC CE emission limits Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment UL Statement This device has completed a UL Commercial Inspection and Testing Services for the multimode DVI cable complied with VW 1 under UL 758 It is validated by the UL file number SV2038 and project number 04CA05353 1 8 Regulatory Statements 2009 Opticis Co Ltd All Rights Reserved Revision 2 2 Nov 26 2009 Opticis Locations Headquarters Opticis Co Ltd 304 Byucksan Technopia 434 6 Sangdaewon Dong Chungwon ku Sungnam City Kyungki Do 462 716 South Korea Tel 82 31 737 8033 8 Fax 82 31 737 8079 www opticis com For order support please contact your Distributor or Reseller For technical support check with the Opticis web site www opticis com or contact techsupp opticis com2. 1080p WUXGA at 60Hz or 1 65Gbps bandwidth per graphic channel Hybrid Fiber optic Cable Flame retardant PVC employing 4 fiber strands and 5 shielded copper wires Tensile load 180N m Minimum bend radius 15 4cm m Outer diameter of cable 7 2mm Mechanical specifications of Tx and Rx module parts m Dimensions 21 5mm 20 5mm 93mm W H D m Clamping strength to cable 14kg Environmental Specifications m Operating temperature 0 C to 50 C M Storage temperature 30 C to 70 C m Humidity 0 to 85 AC DC Power Adapter 0 oO O Power Input AC 100 240V 50 60Hz 0 1A Power Output 5 V 1 0A SMPS DC power Adapter Cord DC Jack Core is 5 V and outer is GND 1 6 Product Specifications Warranty Information 1 One Year Warranty Opticis warrants this optical HDMI extension cable to be free from defects in workmanship and materials under normal use and service for a period of one 1 year from the date of purchase from Opticis or its authorized resellers If a product does not work as warranted during the applicable warranty period Opticis shall at its option and expense repair the defective product or part deliver to customer an equivalent product or part to replace the defective item or refund to customer the purchase price paid for the defective product All products that are replaced will become the property of Opticis Replacement products may be new or reconditioned Any replaced or repaired product or
3. amp pric s Stretch HDMI User s Manual M1 2000 Manual Contents Welcome Congratulations on your purchase of the Stretch HDMI M1 2000 Optical Manual Contents E 1 0 HDMI High Definition Multimedia Interface Extension Cable This manual Welcome Product Description 1 1 contains information that will assist you in installing and operating the product System Requirements for Setup 1 2 Product Description Troubleshooting Maintenance Technical Support 1 5 Product Specifications 1 6 Shipping Grou Warranty Information 1 7 PFT P Regulatory Statements 1 8 O M1 2000 Optical HDMI Cable One 1 unit length as your inquire O 5V AC DC power adapter One 1 unit User s Manual Pictorials Figure 1 Optical HDMI Extension Cable M1 2000 1 1 Figure 2 Tx Module of M1 2000 Cable 1 3 Figure 3 Rx Module of M1 2000 Cable 1 4 Figure 1 Optical HDMI extension Cable M1 2000 1 1 Welcome Product Description 1 0 Manual Contents System Reguiremenis for Setup O Hardware requirements m You have to have a HDMI DVI multimedia systems DVD AV Receiver STB etc or graphic cards It should support the maximum graphic resolution feature of TVs to be connected m No special requirements memory size CPU speed and chipsets if you ve already properly installed your HDMI systems or DVI graphic cards O Software requirements m No special restrictions if you ve already prop
4. part has a ninety 90 day warranty or the reminder of the initial warranty period whichever is longer Opticis shall not be responsible for any software firmware information or memory data of customer contained in stored on or integrated with any products returned to Opticis for repair under warranty or not Warranty Limitation and Exclusion Opticis shall have no further obligation under the foregoing limited warranty if the product has been damaged due to abuse misuse neglect accident unusual physical or electrical stress unauthorized modifications tampering alterations or service other than by Opticis or its authorized agents causes other than from ordinary use or failure to properly use the Product in the application for which said Product is intended Dispose of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate systems This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative m consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources Fo
5. that the Tx and Rx module parts plug correctly to the HDMI source DVDP and TV respectively Check if the HDMI source DVDP and TV are powered on and properly booted Reset the system by de plugging and re plugging the Tx HDMI port or Rx HDMI port or by de plugging and re plugging the power cord plugs of Tx module Re boot up the system while connecting the optical HDMI cable system Screen is distorted or displays noises Ensure connections of both plugs while disconnecting and reconnecting the optical HDMI cables or DC power adapters Maintenance No special maintenance is required for the optical HDMI cables and power supplies Ensure that the cables and power modules are stored or used ina benign environment free from liquid or dirt contamination There are no user serviceable parts Refer all service and repair issues to Opticis Technical Support and Service For commercial or general product support contact your reseller For technical service contact Opticis by email techsupp opticis com or visit its website at www opticis com 1 5 Troubleshooting Maintenance Technical Support Product Specifications M1 2000 Optical HDMI Extension Cable R Compliance vvith HDMI standard support HDMI 1 3 vvith 36 bit color depth and DVI 1 0 DDC2B fully implemented by fiber optic communication Extension limit 100m 330feet for 1080p WUXGA 1 920x1 200 at 60 Hz refresh rate Graphic Transmission Bandwidth support
6. erly installed your HDMI DVI systems O AC DC Power Adapter Technical Advisory The M1 2000 is designed to use either 5V internal power supplied through a HDMI pin 18 DVI pin 14 from the graphic source port or one external 5V AC DC power adaptor to drive the Tx Rx modules To plug the power into Tx module makes the Rx module supplied over a copper wire of the hybrid cable Tips In general many HDMI sources are capable to supply sufficiently DC powers for two modules 1 2 System Requirements for Setup Installation Important Please use the installation procedure below Improper or no operation may result if the start up sequence is not correctly followed Step 1 Carefully unpack the contents of the shipping group Step 2 Plug directly the HDMI plug of the Tx side of M1 2000 into the HDMI receptacle of HDMI source DVDP or Set top Box without power up of TV and HD devices Do NOT recommend to use any intermediate cable or adapter between them It may deteriorate the signal transmission performance Step 3 As shown in Figure 2 plug the 5V power adaptor in the shipping group to the Tx module Note after having done the installing procedure and confirming the system works for your convenience you could try to deplug the power adaptor If it still works you could make sure it runs without the power adaptor If it doesn t just plug it again If you have a system hang up then got to Step 1 Figure 2 T
7. r more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product 1 7 VVarranty Information FCC CE Statement This device complies with part 15 of FCC Rules and EN 55022 55024 61000 3 for CE certification Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 and 2 of FCC Rules and EN 55022 55024 61000 3 for CE certification These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction guide may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Hhe orient or relocate the receiving antenna
8. x Module of M1 2000 Cable 1 3 Installation Step 4 Plug the HDMI plug of the Rx side of M1 2000 into the HDMI receptacle of a TV Do NOT recommend to use any intermediate cable or adapter between them It may deteriorate the signal transmission performance Step 5 Power ON the device of a HDMI source anda TV Note M1 2000 can utilize either the 5V power supplied through a HDMI pin 18 from the HDMI source or the 5V power adaptor Nonetheless you have to confirm the power being capable to supply more than 500mA Note Do NOT worry about plugging the 5V power adaptor to the Tx module irregardless of your HDMI source supplying sufficient power through its connector since M1 2000 has a circuitry against such a power conflict Note Many HDMI sources are able to supply sufficiently DC power to two modules Just in case not being sufficient M1 2000 may require the 5V power adaptor To plug it into Tx module makes the Rx module supplied over a copper wire in the hybrid cable Figure 3 Rx Module of M1 2000 Cable Step 7 If the system does not work properly go to page 1 5 trouble shooting 1 4 Installation continued Troubleshooting The display displays only black screen Ensure that all AC and DC plugs and jacks used by external power supplies both Opticis and others are firmly connected Ensure that power bars are live Ensure that the HDMI ports are firmly plugged in to the HDMI source DVDP and TV Ensure
Download Pdf Manuals
Related Search