Workswell Thermal Vision – User Manual
Contents
1. The lens has a delicate anti reflective coating In order to retracts the lens back to the camera body gently rotate the lens clocwise If the lens can rotate too hard you probably get on the edge of the focus range Trying to rotate the lens more may cause the lens to damage 28 Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual 11 Keyboard pairing General The supplied mini wireless keyboard communicates with the control unit via description bluetooth This technology requires the keyboard to be paired with the control unit prior to first use This process needs to be done only once After that the keyboard will connect to the control unit automatically The keyboard comes already paired with the control unit It is no needed to reapeat the pairing proces again The only exception when you are supposed to pair the keyboard is a replacement of the supplied keaboard with another or adding back the keyboard that was already removed Bluetooth Insert the bluetooth USB dongle a part of the keyboard into any available USB port keyboard of the control unit and turn on the keyboard pairing Open Start gt Control Panel gt Hardware and Sound gt Devices and Printer and click on the Add a device button om Hardware and Sound Devices and Printers Add a devicg 4 Devices 5 as P A ame Yd b USB Optical VE247 Voyager Mini WORKSWELL PC Bluetooth Radio M2. One of the basic functions of FLIR Tools software is editing captured radiometric images thermograms Following functions are available in editing mode displaying basic image information date of capturing model of infrared camera etc editing all five measurement parameters Emissivity Reflected temperature atmospheric temperature distance and humidity of the atmosphere reading and editing text notes playing voice notes adding any number of measuring points adding any number of areas rectangles ellipses including the minimum and maximum temperatures adding any number of delta functions for determining the temperatures differences changing palette adding isotherm above below interval etc changing temperature range only within the limits of the temperature range which was set in camera during shooting Workswell s r o Workswell Thermal Vision 25 Workswell Thermal Vision User Manual Creating Another of the basic features of FLIR Tools software is creating simple reports in PDF reports format For a more comprehensive protocols we recommend using the FLIR Tools and its extension for MS Windows This software is paid and a license can be ordered at Workswell s r o 26 Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual 8 Enviroment Conditions 9 General description Enviroment Conditions You should follow these s
3. You may need to wait for this to finish before your device is ready to use Devices and Printers Bluetooth 3 0 Macro Keyboard Workswell s r o Workswell Thermal Vision 31 Workswell Thermal Vision User Manual 12 Cleaning the camera housing cables and the control unit Cleaning the infrared lens 32 Maintanance Liquids Use one of these liquids e Warm water e A weak detergent solution Equipment A soft cloth Procedure 1 Soak the cloth in the liquid 2 Twist the cloth to remove excess liquid 3 Clean the part with the cloth Liquids Use one of these liquids e Acommercial lens cleaning liquid with more than 30 isopropyl alcohol e 96 ethyl alcohol C2H5OH e DEE ether diethylether C4H100 e 50 acetone dimethylketone CH3 2CO 50 ethyl alcohol by volume This liquid prevents drying marks on the lens Equipment Cotton wool Procedure 4 Soak the cotton wool in the liquid 5 Twist the cotton wool to remove excess liquid 6 Clean the lens one time only and discard the cotton wool Warning Make sure that you read all applicable MSDS Material Safety Data Sheets and warning labels on containers before you use a liquid the liquids can be dangerous Caution Be careful when you clean the infrared lens The lens has a delicate anti reflective coating Do not clean the infrared len stoo vigorously This can damage anti reflective coating Re applyi
4. connected to this input is set to the appropriate end position Video recording is not active when the joystick or the switch is set to the other end position Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual HDMI Analog It is recommended to convert digital video to analog for wireless video transmission converter For this purpose the standard package contains a HDMI Analog converter The converter is connected to the control unit via the supplied HDMI cable The HDMI Analog converter requires its own power supply The supplied micro USB cable can be used for the power supply Plug the cable into any free USB port on the control unit PAL mode is used in most European imaging devices NTSC mode is used for equipment from North and Central America and Japan Focusing the The infrared camera has adjustable focus The focus can be set using the supplied thermal vision focus tool camera In order to focus on short distance gently rotate the lens counterclocwise During this movement the lens extends from the camera body If the lens can rotate too easily you probably get on the edge of the focus range Trying to rotate the lens more may cause the lens to fall out In order to focus on long distance or infinity gently rotate the lens clocwise During this movement the lens retracts to the camera body If the lens can rotate too hard you probably get on the edge of the focus range T
5. in the Workswell Control system The Download Card gains the cardholder access to dowload the relevant documents including the user manual in electronic form and software on the website www workswell cz Workswell s r o Workswell Thermal Vision 7 Workswell Thermal Vision User Manual 3 Typographic Conventions Help and Community Forum Updates Firmware User Information Following typographic conventions are used in this User Manual UPPER CASE is used for the names of keys buttons and menu items COURIER is used for filenames and paths Italic is used for important information and document names bold is used for the links to other sections for function names or internet sites For technical questions that were not answered in this User Manual feel free to contact your dealer or visit the product website at http www drone thermal camera com Try to find an answer by searching the Community Forum and if there is not such answer please send an email on info workswell cz The primary aim of Workswell s r o company is to supply their products in a way to meet the current needs of its users and at the same time to remove all the weaknesses that were found in their use as soon as possible For this reason Workswell s r o regularly releases updates for all their products fe Firmware is the internal control program of the device From the user s point of view only the current
6. 2 years provided such products have been under normal storage and use in accordance with herein instructions The warranty extends only to the original purchaser and is not transferable It is not applicable to any product which has been subjected to misuse neglect accident or abnormal conditions of operation In the case of a defect in a product covered by this warranty the product must not be further used in order to prevent additional damage The purchaser shall promptly report any defect to Workswell s r o or its authorized distributor or this warranty will not apply Workswell s r o will at its option repair or replace any such defective product free of charge if upon inspection it proves to be defective in material or workmanship and provided that it is returned to Workswell within the said two year period Nobody but Workswell s r o is allowed to open or modify such product Workswell s r o has no other obligation or liability for defects than those set forth above No other warranty is expressed or implied Workswell s r o shall not be liable for any direct indirect special incidental or consequential loss or damage whether based on contract tort or any other legal theory Copyright Workswell s r o All rights reserved worldwide No parts of the software including source code may be reproduced transmitted transcribed or translated into any language or computer language in any form or by any means electronic magnet
7. Manual Range Setup Temperature Range Automatic Minimum Maximum Manual 40 0 C gt 550 0 C OK Cancel Clicking the F8 key opens the following Application Settings Workswell Control application offers a wide range of settings in order to allow the user to customize the application behavior to the specific needs A gt Application Settings Thermal Mode Alarm Mode General Settings Display Settings Temperature Range Min Max Functions Automatic 7 Display Max Max Color i Manual Display Min Min Color M Minimum Maximum Display Center Color E 0 0 C 50 0 C Display Temperature Palette BWRGB gt Application settings consists of four tabs that sumarize settings for each part of the application Tabs description 1 Thermal Mode thermal mode settings 2 Alarm Mode alarm mode settings 3 General Settings measurement parameters and image modes settings 4 Display Settings font size and legend refresh frequency settings Workswell s r o Workswell Thermal Vision 21 Workswell Thermal Vision User Manual Thermal Thermal mode can be edited at Thermal Mode tab mode settings Thermal Mode Alarm Mode General Settings Display Settings Temperature Range Min Max Functions Automatic 1 Display Max Max Color E 5 Manual Display Min Min Color Minimum Maximum Display Center Color P 00 C 50 0 C Display Temperature G o
8. Workswell Thermal V ision User Manua Workswell Thermal Vision Thermal Imaging System for UAV User Manual Compatible with Workswell Thermal Vision 1 0 Release Date 13 7 2015 AB WorKSWELL Workswell Thermal Vision User Manual Introduction Workswell Thermal Vision Pro is the thermal imaging system for unmanned aerial vehicles UAVs drones It is a lightweight system equipped with a visible soectrum camera and a thermal imaging camera The aim of the whole system is the simple transfer storage and processing of radiometric temperature data directly from an unmanned aerial vehicle drone and displaying the data on the screen of the UAV remote control in real time The system also offers a variety of palettes and alarm security modes which can be combined with a visible spectrum camera Workswell Thermal Vision Pro is designed in order to allow controlling its functions during a flight The system has three digital input ports which are fully compatible with standard RC receivers The system supports a wireless video recording from a thermal imaging camera and a wireless image making from both thermal imaging and visible soectrum camera Data video or individual images can be saved directly using the UAV remote control via the digital input ports on a control unit The system offers three image modes Thermal mode Alarm mode and Visible Soectrum Camera mode that can be set by the operator using the keyboard prio
9. ermal Vision 23 Workswell Thermal Vision User Manual Display Display parameters can be edited at the Display Settings tab Settings Thermal Mode Alarm Mode General Settings Display Settings Temperature Range Setup Units O Font Size Refresh Interval D Temperature 40 1000ms Celsius 7 Min Max Function Setup a Cross Size Cross Refresh Interval G 15 px 100ms lt Font Size Temperature Refresh Interval 40 500 ms About Display Settings consists of three parts 1 Temperature Range Setup font size and refresh interval setup of the temperature range legend 2 Temperature unit display temperature in Kelvins Fahrenheits or Celsius degrees 3 Min Max Function Setup font size and refresh interval settings of the min max cursor 24 Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual 7 General description Editing images FLIR Tools compatibility Workswell Thermal Vision Pro allows you to take radiometric images Captured radiometric images can be further edited using FLIR Tools software Basic functions of FLIR Tools Editing images thermograms captured by an infrared camera Creating simple reports reports on measurements in PDF format Download link for FLIR Tools http support flir com SwDownload a RssSWDownload aspx ID 120 More information http www termokamery flir cz software flir tools
10. es of the problem 1 The keyboard batteries level is low 2 USB dongle is not connected 3 The keyboard is too far from the control unit 4 The keyboard is in Stand By Problem solving 1 Charge the batteries 2 Plug the USB dongle in any free USB port on the control unit 3 Keep the Keyboard within 2m from the control unit 4 Turn the keyboard off and on Workswell Thermal Vision 33 Workswell Thermal Vision User Manual Application logs 34 A log file is created and saved on a disk of the control unit each time you run the Workswell Control application Sending the log file back to Workswell s r o can significantly reduce the time needed to resolve the problem Folder path C Users Documents Logger The folder is divided into subfolders named YYYY MM DD where YYYY is the year MM is the month and DD is the day of the date when Workswell Control application was running Logs from different days are stored separately Name and format of log file Log name Log format Log file HH MM SS_LogFile txt HH hours MM minutes SS seconds of the time the application was started Thermal Imaging System for UAV Workswell s r o
11. ic optical manual or otherwise without the prior written permission of Workswell s r o Names and marks appearing on the products herein are either registered trademarks or trademarks of Workswell s r o All other trademarks trade names or company names referenced herein are used for identification only and are the property of their respective owners 4 Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual Contents MEF OCUGCUION 65ce costal tc ucatliceanntack E E T 2 Warnings and CAUTIONS se caceewca ae e atch E T we celica dcatiueseudenbenacee a N O 6 Standard Package CONTENT certio E EA 7 Userin ormat Noranian E EOS 8 Helpand FA aa Si re Ne eee 9 SVSLENCA SOMOV capestasatascucur nate a a a a 10 VSEM COMTO karaa a tate eeuentataaaal oureaamiees ote davon uaataecade mares unnenadeaie 16 FUR TOO COMMALIOE IE niena E aeaneat acne ianence sie enueiaiioruuieeeseeans 25 ENVIROMENT COMGILIONS cirein ain e doadesuistwonsaacennncgenta s 27 rarcd ensten cement anean e ner oer ne ne enn rT En roe oe 28 Maintanant E eire E A E N 32 Troubleshooters a E A ahs ye SGsA eStats as 33 Workswells r o Workswell Thermal Vision 5 Workswell Thermal Vision User Manual 1 Warnings and Cautions Warnings Before using the product please check that there is no visible damage or malfunction If there are any visible signs of damage or other defect on the device then on no account should it be installed or pu
12. l Ss SS Palette BWRGB N Q About Thermal mode settings consists of three parts 1 Temperature Range automatic or manual temperature range settings 2 Palette select on of the fourteen palettes 3 Min Max functions display min max temperature cursor display center cursor set cursors color and display min max temperature value on the screen Alarm Mode Alarm lsothermic mode can be edited at Alarm Mode tab settings Thermal Mode Alarm Mode General Settings Display Settings Temperature Range Min Max Functions Automatic 1 7 Display Max Max Color fj Display Min Min Color Minimum Maximum Display Center Color P 5 Manual 00 C 50 0 C Display Temperature Alarm Function Temperature Intensity Color Above Alarm 300 C 50 5 Below Alarm 30 0 C 50 About 22 Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual Alarm mode settings consists of three parts 1 2 3 1 2 Temperature Range automatic or manual temperature range settings Alarm Function select Above or Below alarm function temperature limits settings set color and intensity of marked areas Min Max functions display min max temperature cursor display center cursor set cursors color and display min max temperature value on the screen Function description Above Alarm the UAV remote cont
13. ng antireflective coating is not possible and is required to change the lens Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual 13 Thermographic camera not available Visible spectrum camera not available Mini Wireless Keyboard is not working Workswell s r o Troubleshooting Possible causes of the problem 1 Thermal imaging camera is disconnected 2 The Workswell Control application was not properly terminated 3 The cotrol unit was powered after shutdown Problem solving 1 Please check the thermal imaging camera connection 2 Close Workswell Control application by pressing F4 key disconnect and connect the thermal imaging camera and run Workswell Control again 3 Close Workswell Control application by pressing F4 key disconnect and connect the thermal imaging camera and run Workswell Control again Possible causes of the problem 1 The visible spectrum camera is disconnected 2 The Workswell Control application was not properly terminated 3 The control unit was powered after shutdown Problem solving 1 Please check the visible spectrum camera connection 2 Close Workswell Control application by pressing F4 key disconnect and connect the visible spectrum camera and run Workswell Control again 3 Close Workswell Control application by pressing F4 key disconnect and connect the thermal imaging camera and run Workswell Control again Possible caus
14. ng the flight Input port Hotkey Image Mode Switching 1 F5 Video Recording 3 F7 More information about each function are in System Control section Servo connector scheme s control signal J e PO WErSOPRY J Note Power supply is not required Digital inputs function A signal from a standard RC reciever is expected on the digital input It means that a PWM modulation is used to encode the signal and a pulse with a variable length from 1ms to 2ms appears every 2 ms may vary depending on the type of reciever Image mode is switched when the length of the pulse gets over 1 7ms That means that the image mode is changed every time a joystick or a switch which is controlling the channel that is connected to this input is set to the appropriate end position Holding the joystick or a switch in the appropriate end position will cause switching the image mode just once Images are made when the length of the pulse gets over 1 7ms That means that the images are saved to the memory every time a joystick or a switch which is controlling the channel that is connected to this input is set to the appropriate end position Holding the joystick or a switch in the appropriate end position will cause making just one set of pictures Video recording is active when the length of the pulse is greater than 1 7ms That means that the video is saved to the memory when a joystick or a switch which is controlling the channel that is
15. ol unit after shutting it down may lead to a temporary failure of the connected devices see chapter Troubleshooting Image mode The operator can switch between the image modes via input port input 1 or by clicking switching the F5 key An order of the active image modes can be set in Application Settings see General Settings section Image Modes Mode description thermal image with information on the distribution of Thermal Mode surface temperatures according to the 1 of the 14 pallets displays actual black and white thermal image and Alarm Isothermic mode marks areas with higher lower temperature than the user set Visible spectrum camera Visible soectrum camera image for better orientation mode Thermal Mode oe a Yao Ay eA 2 k S QF i 3 MB WorksweLL Workswell s r o Workswell Thermal Vision 17 Workswell Thermal Vision User Manual 18 Alarm Isothermic Mode F32 1 C MB WorksweLL k Visible spectrum camera mode ai wns MB WorksweLL Note The visible spectrum camera lens has a shorter focal length than the infrared camera lens It means that the visible spectrum camera angle of view is wider than the infrared camera angle of view Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual Image making Video recording Individual images can be saved via input port input 2 or by clicking the F6 key Four images
16. oment this produc may cause high frequency interference can interfere receivers and other sensitive equipment In such a case It may require the user to take appropriate measures to avoid the interference Workswell Thermal Vision Pro uses a Bluetooth technology which is defined by the IEEE 502 15 1 standard This technology may interfere UAV drone receivers Therefore we strongly recommend that you eject the Bluetooth USB dongle prior to the flight 6 Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual 2 Package Content Control Unit Dowload Card Standard Package Content Inside the Workswell Thermal Vision Pro package you will find following items Thermal imaging camera and visible spectrum camera in bicamera case Control unit with Windows 7 and Workswell Control app Focus tool for thermal imaging camera Mini wireless keyboard HDMI Analog converter Set of cables 2xUSB 3 0 A microB 1xUSB 2 0 A miniB 1xHDMI RCA 1xPower cable 80cm Download Card Inside the standard package you will find the control unit running Windows 7 The control unit has three input ports used to operate the system via the UAV remote control Installed Workswell Control system uses the software of National Instruments and other companies software Workswell s r o fully acknowledges all license agreement with National Instruments and all charges for the use of the module
17. on User Manual Connecting the The bicamera case including a thermal imaging camera and a visible spectrum camerastothe camera is connected to the Control Unit using two USB 3 0 A microB cables which control unit are supplied Each camera can be connected to any available USB port on the control unit Connecting the The control unit can be powered throught a 12 19 V DC connector on the back control unitto panel The back panel DC connector is compatible with a 5 5 mm OD outer power supply diameter and 2 5 mm ID inner diameter plug where the inner contact is 12 19V 10 V DC and the shell is GND oo 3 A 5 5mm GND B 2 5mm 12 19V The control unit can be powered via a power adaptor optional accessories or a custom power supply that meets the above parameters For this purpose the standard package contains appropriate 5 5x2 5mm coaxial connector with a cable length of 80 cm GND black wire 12 19V DC red wire Workswell s r o Workswell Thermal Vision 11 Workswell Thermal Vision User Manual Input ports Input 1 Input 2 Input 3 12 The control unit is equipped with three servo connetors JR type These connectors can be connected to any standard RC reciever and used for controlling some functions of Workswell Thermal Vision Pro system during a flight Three channels are needed for controlling all available functions The functions which can be controlled duri
18. ouse Add a printer v 4 Printers and Faxes 2 d SZ EZ Document Writer 4 Unspecified 1 o USB SERIAL CH340 COM3 7 8 items Sj Workswell s r o Workswell Thermal Vision 29 Workswell Thermal Vision User Manual The keyboard appears in the list of devices that can be added Choose the Bluetooth 3 0 Macro Keyboard and click the Next button gt F Add a device Select a device to add to this computer Windows will continue to look for new devices and display thern here Bluetooth 3 0 Macro Keyboard x Bluetooth Keyboard Following window appears showing you the code that has to be used to pair the keyboard Enter this code to the mini wireless keyboard and than press the Enter E ig Add a device Type the following code into your device This will verity that you are connecting to the correct device 37309072 After you type this code you might need te press Enter OK or a similar button on your device Bluetooth 3 0 Macro Keyboard E Waiting for you to enter this pa eee eee How do I enter this code on my device 30 Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual The keyboard has been successfully paired if you can se this window SP F Add a device This device has been successfully added to this computer Windows is now checking for drivers and will install therm if necessary
19. r to take off During the flight the operator can switch between the modes using the UAV remote control With the Thermal Mode on the UAV remote control screen displays the actual thermal imaging aerial video with information on the distribution of surface temperatures according to the one of the fourteen pallets that was set by the operator The Alarm Isothermal Mode offers a choice between an Above Alarm and a Below Alarm The operator can set temperature limits for each mode With the Above Alarm on the UAV remote control screen displays the actual black and white thermal image and marks areas with higher temperature With the Belowe Alarm on areas with lower temperatures are marked Both modes allow the following settings automatic or manual temperature range automatic search for the maximum and the minimum temperatures including cursors and the display of the temperature value on the screen of the UAV remote control Visible Spectrum Camera mode displays the actual visible spectrum video on the screen of the UAV remote control 2 Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual Workswell Thermal Vision Pro User Manual Workswells r o Workswell Thermal Vision Workswell Thermal Vision User Manual Legal Disclaimer All products software hardware or firmware manufactured by Workswell s r o are warranted against defective materials and workmanship for a period of two
20. rol screen displays the actual black and white thermal image and marks areas with higher temperature than the temperature limit Marked area has selected color and intensity default red color and 50 intensity Below Alarm the UAV remote control screen displays the actual black and white thermal image and marks areas with lower temperature than the temperature limit Marked area has selected color and intensity default blue color and 50 intensity Note Only one alarm function can be selected for the flight General Setting measurement parameters and selecting available image modes can be done Settings through the General Settings tab A Application Settings eo Thermal Mode Alarm Mode General Settings Display Settings Measurement Parameters Available Image Modes Emissivity Distance 7 Thermal Mode 095 10m amp 2 7 Alarm Mode Reflected Temp 20 0 C 1 7 Visible Spectrum Mode Atmospheric Temp Camera Settings A 20 0 C Shutter Period 5min 3 OK Cancel About Default General Settings consists of two parts 1 2 3 Measurement parameters thermal conversion parameters settings Available Image Modes Image modes selection Checked modes are available to be switch during the flight see section Image mode switching Callibration period 5 minutes period is recommended shorter period can lead to camera shutter wear Workswell s r o Workswell Th
21. rying to rotate the lens more may cause the lens to damage Infinity focus is recommended for most of the applications Workswell s r o Workswell Thermal Vision 13 Workswell Thermal Vision User Manual Mini wirelles Inside the Workswell Thermal Vision Pro package you will find a mini wireless keyboard bluetooth keyboard This keyboard can be used to set the system before the flight The keyboard is connected to the control unit through the USB dongle The USB dongle is located under the keyboard The keyboard comes with a built in rechargeable Li lon battery The keyboard can be charged via micro USB port using standard 5V USB adapter While charging the Red LED turns on and gets dimmer as the battery charge increases Mounting the The bicamera case can be mounted to the drone using the 4 threaded mounting bicamera case holes M3x8 Mounting holes are located on the bottom of the case 14 Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual Mounting the The control unit can be mounted to the drone using the 2 threaded mounting holes control unit M3x6 Mounting holes are located on the bottom of the control unit io 116 C AN o0 z N a 116 ees ees i o w i 112 Workswells r o Workswell Thermal Vision 15 Workswell Thermal Vision User Manual 6 System Control General The Workswell Control soft
22. s saved Workswells r o Workswell Thermal Vision 19 Workswell Thermal Vision User Manual Context menu Context menu can be opened by right clicking the screen Context menu displays only in Thermal and Alarm mode Context menu is different for each image mode Context menu in the Thermal Mode palette list v Display Max Gray v Display Min Gradient 5 Palette Rainbow 1 Rainbow 2 Temperature Iron 1 v Iron 2 Black Red BWRGB WBRGB Fire Natural Sepia Steps Temperature Temperature Range Setup can be opened by double left clicking the temperature range range setup legend Temperature range can be set only in Thermal and Alarm Isothermic mode legewmobc M WVonrksweLL Automatic temperature range fully uses the resolution of the color palette Image contrast is the maximum possible Automatic temperature range is update periodically see section Display settings E Manual Range Setup l Temperature Range Automatic Minimum Maximum Manual 40 0 C 550 0 C Cancel 20 Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual Application settings Manual temperature range suitable if constant temperature color is required Color matching a certain temperature doesn t change in time Image contrast is generally lower Manual range can vary from 40 C to 550 C which is the temperature range of the supplied infrared camera E
23. t into operation Any interference and noncertified service operations into the product leads to an automatic loss of warranty Notifications Do not use or store the device in conflict with the storage and operating conditions laid down in this manual only for hardware Do not point the infrared camera with or without the lens cover at strong energy sources for example devices that cause laser radiation or the sun This can have an unwanted effect on the accuracy of the camera It can also cause damage to the detector in the camera Do not use the Workswell Thermal Vision syst m in temperatures more than 45 C 122 F High temperatures can cause damage to the camera Do not apply solvents or equivalent liquids to the control unit the cameras the cables or other items Damage to the items can occur Be careful when you clean the visible camera spectrum lens Be careful when you clean the infrared lens The lens has an anti reflective coating which is easily damaged Do not use too much force to clean the infrared lens This can cause damage to the anti reflective coating The encapsulation rating is only applicable when all the openings on the all components of the system are sealed with their correct covers hatches or caps This includes compartments for data storage batteries and connectors Workswell Thermal Vision Pro is a class A product according to standard CSN EN 55022 and EN 55022 In a domestic envir
24. thermal alarm real and radiometric are saved on the disc each time the F6 key is pressed or the input is activated The Images can be accessed after closing the application All images are stored in the Workswell Control Data folder placed on the desktop Folder path C Users Documents Workswell Control Logs The folder is divided into subfolders named YYYY MM DD where YYYY is the year MM is the month and DD is the day of the date the images where taken Images from different days are stored separately Names and formats of saved images Image name Image format Visible spectrum HH MM SS modeQ jpg camera image Thermal image HH MM SS_ model png Alarm Isothermic HH MM SS mode ong image ee Radiometric image HH MM SS radiometric jpg HH hours MM minutes SS seconds of the time the image was saved Thermal video recording can be started via input port input 3 or by clicking the F7 key Deactivating the input port or clicking the F7 key again stops the recording and saves the video on the disc Active video recording is indicated with REC symbol in the top left corner of the screen The video consists of image modes that were visible on a screen of a control unit during the recording Folder path C Users Documents Workswell Control Logs Name and format of saved video Video name Video format Thermal video HH MM S5 Viadeo avi HH hours MM minutes SS second of the time the video wa
25. torage and operating conditions for proper function of the Workswell Thermal Vision Pro system Operation temperature range from 0 C to 45 C Storage temperature from 20 C to 60 C range Humidity 20 80 noncondensing Maximum irradiance 100W cm 2 If you use the product in coflict with these conditions damage to the Workswell Thermal Vision system can occur Infrared camera warp up Modern infrared cameras are based on a sensor microbolometer array that needs to be warmed up to the working temperature before it can be used The sensor starts warming up automatically when you connect the infrared camera to the control unit and start the Workswell Thermal Vision Pro system The infrared camera is usually ready in less than 5 minues During the warm up proces the accuracy of the measured temperature data is lower and various defects can appear in the thermal image Therefore we recommend to let the infrared camera warm before using it Workswells r o Workswell Thermal Vision 27 Workswell Thermal Vision User Manual 10 Infrared lens replacement Lens Follow these stept when replacing infrared lens replacement 1 Use the focus tool to unscreew the lens counterclockwise 2 Perform lens replacement pointing the lens pointing downwards This prevents the dirt settlement on infrared chip Never point infrared camera without lens to any light source Be careful when you replace the infrared lens
26. version of the firmare that is loaded in the device at the time of use is essential Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual 4 Help and FAQ General While looking for a solution of any technical problem we recommend following Instructions these steps try to find an answer by searching this User Manual contact your dealer search Workswell s r o website at http www drone thermal camera com send an email to info workswell cz Workswell s r o Workswell Thermal Vision 9 Workswell Thermal Vision User Manual 5 System Assembly General The Workswell Thermal Vision Pro system consists of several parts The system Description has to be assembled prior the first use We recommend to check the system prior to any further use Follow these steps to comission the system 1 Connect the cameras to the control unit 2 Connect the control unit to power supply 3 Connect the digital input ports 4 Connect the HDMI Analog video convetor 5 Connect the mini wireless keyboard USB dongle 3x digital input servo connectors A CONTROL UNIT 2x USB3 2x USB3 micro HDMI mini Bicamera case HDMI Analog video RCA connector E HDMI2AV a convertor Audio R L Power Supply 12 19V DC optional RED BLACK USB2 mini power supply 10 Thermal Imaging System for UAV Workswell s r o Workswell Thermal Visi
27. ware starts automatically at the start of the Control Unit description User interface appears on the display of the UAV control unit or on the connected monitor soon The application can display thermal image and visible spectrum image adjust the measurement parameters and save data video or individual images System Control Input Port Hotkey Close the Workswell F4 Control Image Mode Switching F5 Image Making Video Recording n Oo Application Settings Starting the The Workswell Control app starts automatically at the start of the Control Unit If the application application was closed it can be re run by double clicking the Workswell Control icon placed on the desktop VVOrKSWell Controlia tal VV 0 TK SW l GOnNtrO Closing the The running application can be closed by clicking F4 key Any other termination of the application application may lead to a temporary failure of the connected devices see chapter Troubleshooting 16 Thermal Imaging System for UAV Workswell s r o Workswell Thermal Vision User Manual Shutting The control unit is turned off the same way as most of the computers running Windows down the 7 Start gt Shut down Start menu is hiden after closing the application It appears after control unit moving the cursor to the bottom left corner of the screen Disconnect the power supply after shutting down the control unit Supplying the power to the contr
Download Pdf Manuals
Related Search