DVM-120 - Alecto
Contents
1. talk back function of the baby unit 1 push after selecting the adjacent icon the OK button to select this function 2 Set with buttons A and Y the desired volume 3 push B button 2x to capture the setting and exit the menu contrast 1 push after selecting the adjacent icon the OK button to select this function 2 set with buttons A and Y the desired contrast 3 push i button 2x to capture the setting and exit the menu time 1 push after selecting the adjacent icon the OK button to select this function 2 set with buttons A and Y the hours 3 select with buttons and P the minutes 4 set with buttons A and Y the minutes 5 push i button 2x to capture the time and exit the menu wake up alarm 1 push after selecting the adjacent icon the OK button to select this function 2 switch with buttons lt and P to the ON function or OFF function 3 select with buttons A and Y the alarm time and push OK 4 set with buttons A and Y the hours 5 select with buttons lt and P the minutes 6 set with buttons A and Y the minutes 7 push button 3x to set the alarm time and exit the menu An alarm sounds for 60 seconds max or push the OK button to turn off prematurely The alarm is repeated daily until you disable it via the menu see Instruction 2 above Feeding timer 1 push after selecting the adjacent icon the OK button to select this function 2 switch with buttons lt and P to the ON function or O2. Alecto DVM 120 observation system USER MANUAL INDEX INTRODUCTION E n 3 FUNCTIONLIST BABY NIN 2 E 3 PARENT UNI I M P 4 INSTALL BABY UNNE u PP s 5 opposite 5 USE SWITCFIE ON OPF T PAREN FONI e T MENU DRIVEN FUNCTIONS SETTINGS 8 AUTOMATIC NIGHTVIEW rt 10 SYSTEM EXPANSION GENERAL PP aaa E E E er 11 REGISTER ADDITIONAL CAMERAS sordos criada 11 TIPS AND WARNINGS GENERAL uuu Q 11 INSTALLATION 12 RECEPTION INDICATOR OUT OF RANGE ALERT 12 DELAY IN SOUND AND VISION dEe tina iuba 12 POWER SUPPLY 12 IN TERFERENCE FREE ii reper 13 alle 13 BUGGING TAPPING c 13 DE e c PA uo 13 ENVIRONMENT AND DISPOSALL an 13 IN CASE OF NO PICTURE NO SOUND 13 DECLARATION OF CONFORMITY 14 SPECIFICATIONS Se 14 WARRANTY uuu u liar baca 15 1 INTRODUCTION The Alecto DVM 120 is a wireless audio video observation system for indoor
3. FF function 3 use the buttons A and Y to select interval times minimum 30 minutes maximum 8 hours 30 minutes adjustable and press OK 4 push lB button 2x to capture the power timer and exit the menu The power timer sounds for 60 seconds max or push the OK button tot turn off prematurely After the interval time set by instruction 3 the signal sounds again and this is repeated until you disable it via the menu see instruction 2 above Lullabies 1 push after selecting the adjacent icon the OK button to select this function 2 Scroll buttons A and Y to the songs 1 5 and then use the keypad and P to select per song or it should be played a V appears behind this song or that this song should be skipped an X appears now after this song 3 then scroll buttons and Y to Pl and then scroll P to and select Pl to start playing or to stop playing Note the lullabies sound CONTINUOUSLY until the moment you turn it off according to the above instruction Automatically switch off video sound when the baby sleeps VOX 1 push after selecting the adjacent icon the OK button to select this function 2 a with buttons A and Y the sensitivity VOX switched off the baby monitor continuously displays the image and sound of the baby CO em low sensitivity the baby should cry loudly before baby monitor switches on CO em average sensitivity the baby monitor switches on
4. aby monitor as wastepaper However we recommend to keep it so that during transport the device can be properly packaged Defect or elaborate batteries must be handed over to your local depot for chemical waste or the dedicated battery collection points Never throw developed batteries with household waste 5 the video baby monitor replaced hand it over to your supplier they provide an environmentally friendly processing 6 11IN CASE OF NO PICTURE NO SOUND the parent unit and the baby unit are turned on connected adapter batteries fully charged isthe parent unit within the range of the baby unit the baby unit is not disabled as a result of silence VOX the volume on the parent unit is not at O off 15 this all okay then take the adapters from the wall outlet remove the rechargeable battery from the parent unit now wait more than a minute and put everything back in place Switch on the parent unit and the baby unit again e f you still have no video or sound please contact the Alecto service depart ment on telephone 073 6411 355 Netherlands 03 238 5666 Belgium or via internet www alecto nl DECLARATION OF CONFORMITY The Alecto DVM 120 meets the essential requirements and provisions as defined by European Directive 1999 5 EC The declaration of conformity is available on the website www alecto info The use is permitted in all EU countries In France Italy Russia and the Ukrai
5. all outlet the battery is charging Charge for the first time use the battery for at least 15 hours even though there is an the indication that the battery is fully charged The charging circuit for the battery is controlled electronically there is no danger of overcharging so you can leave the adapter plugged in continuously In case you are not using the set for a long period of time gt 2 months it is advisable to take the adapter from the wall outlet and remove the battery from the parent unit When resuming operation first properly recharge the battery Audio Video connection Use this connection to display the image on a big screen TV to view or record Note that if you insert a 3 5mm plug here the own screen of the parent unit is being switched off Belt clip and desktop stand Optionally you can slide the belt clip on the back of the parent unit to carry the parent unit with you or you can use the table stand to place the parent unit on a table or desk 4 1 4 2 USE SWITCH ON OFF Baby unit Slide on the right side of the baby unit the switch to ON to switch on the baby unit Slide this switch to OFF to switch off the baby unit Parent unit Slide on the right side of the parent unit the switch to ON to turn on the parent unit Slide this switch to OFF to switch off the baby unit PARENT UNIT Reception volume Press repeatedly A button to increase the r
6. ately In about 6 hours the adapter has a battery recharged whether through the parent unit is switched on or off 6 6 INTERFERENCE FREE This image baby monitor is digitally coded So you will never receive the signal from other equipment nor will the signal of your baby unit s be displayed on the parent unit of for example your neighbors Incase the baby unit s or parent unit is located in or in close proximity to electromagnetic fields the signal can then video or audio experience some disturbance In this case try a different location for the baby unit s or the parent unit or move if possible the source of the interference 6 7 REACH The range of the video baby monitor is up to 300 meters in the open field and up to 50 meters in house the range depends on local conditions Are the units out of range from each other the image first freezes a few seconds no movement followed by Y no reception the screen turns black Also every second sounds an alarm tone 6 8 BUGGING TAPPING The bugging tapping of this video baby monitor is virtually impossible Not only it is necessary to be in the range of the video baby monitor one also needs expensive equipment 6 9 MAINTENANCE Clean the video baby monitor only with a damp cloth do not use chemical cleaning products Before cleaning the adapters should be disconnected 6 10 ENVIRONMENT AND DISPOSAL You can hand in the packaging of this video b
7. e ticket Cords plugs and batteries are not covered by the warranty Any further liability especially for any consequential damages are excluded Alecto 7 ES gt WWW ALECTO NL SERVICE ALECTO NL NL 073 6411 355 Lokaal tarief BE 03 238 5666 Lokaal tarief Tarif local DE 0180 503 0085 Lokale Festnetzkosten Hesdo Australi laan 1 gt lt 5232 BB s Hertogenbosch The Netherlands
8. eceiver volume Press repeatedly W button to decrease the receiver volume Press MY button to capture the selection You can choose from five volume levels and volume off In the display while setting the level is shown Brightness Press repeatedly P button to increase the brightness e Press repeatedly button to decrease the brightness e Press fs button to record your selection You can choose from five brightness levels In the display while setting the level is shown Zoom get closer Press ZOOM button to zoom in the image e Now use the buttons A V P gt and 4 to look up down left or right e Push Bs button for normal image Talk back Press TALK to talk back to the baby unit hold down the button while spea king Display on off Press button to turn off the image the sound remains Press button again to switch the image again This function is apart from the function which automatically switches off video and audio when the baby sleeps Please see later in this manual Night light on off button for over a second to turn on the night ligth on the baby unit Again hold amp J button for over a second to turn off the night light 4 3 MENU DRIVEN FUNCTIONS amp SETTINGS Press the parent unit on B9 button to open the menu At the bottom of the display the following icons apear Select with the buttons lt and P the desired function 9 volume of the
9. ee camera space push the OK button the green light above the screen of the parent unit flashes now push and hold the registration button on the new camera until after about a second the image of the camera is displayed on the parent unit the camera is now registered press to register Read the manual carefully and follow all instructions Never store or use the baby unit or the parent unit in damp or humid area or environment Ensure good ventilation never cover the parent unit the baby unit and or the power adapter s and never place it next to a heat source Use only the supplied adapter s connecting a different type of adapter may cause damage to the electronics Make sure the adapter cables are not damaged and prevent these cords cause stumbling or falling Never disassemble the parent unit the baby unit and or the power adapter s this should be done only by qualified personnel 6 2 INSTALLATION Only connect the power adapter to the baby unit or the parent unit or discon nect when the power adapter is taken out of the wall outlet Don t install the DVM 120 during an electrical storm Do not touch any uninsulated adapter cables unless the adapters have been taken from the wall outlet 6 3 RECEPTION INDICATOR OUT OF RANGE ALERT On the top left in the image of the parent unit the strenght is indicated by which the signal from the baby unit is received Yil very good reception Yl good recepti
10. ghtly downwards Finish finally the adapter cord neatly with cable brackets Placing advice Incase of use as a babymonitor place the baby unit on a minimum distance of 2 meters away from your baby and make sure the adapter cable is safely tucked away For an optimal range it is preferred to set up the baby unit as high as possible free from large metal surfaces PARENT UNIT The parent unit is not waterproof and therefore only suitable for indoor use Power The parent unit can be powered directly from the supplied rechargeable battery or the included power adapter Once you connect the power adapter the battery is charging so the parent unit can be used mobile Battery 1 Open the battery compartment by sliding the battery cover off the back of the parent unit 2 Place the battery 3 Slide the battery cover back on the parent unit Don t force placing the battery Only use the supplied rechargeable Li ion battery 3 7V 800mAh Power adapter 1 Connect the other power supply adapter with the connector on the side of the parent unit 2 Connect the adapter to a 230V outlet Only use the supplied power adapter with modelnumber TGEO50P055 Make sure the power cable can not lead to stumble or fall Bundle too long wires with tape or with specially for this purpose designed and available wire ties Charge Once you have connected the parent unit to the power adapter and the adapter is connected to a 230V w
11. ne s only indoor use permitted SPECIFICATIONS Reach up to 50 m indoors up tot 300 meters outdoors Power parent unit 3 7V Lithium lon battery incl 5VDC 550mA power adapter incl model TGEOS50PO055 Power baby unit 5VDC 550mA power adapter incl model TGE050P055 Frequency 2 4GHz digital frequency hopping FHSS 63 channels Display 2 4 TFT LCD display 320 240 pixels Battery charging time parent unit 6 uur Battery life parent unit 5 7 uur These times are approximate and depend on usage and settings and the condi tion of the battery WARRANTY Alecto DVM 120 is guaranteed for 24 months from date of purchase We guaran tee during this period the free repair of defects caused by material and manufactu ring defects All this at the final judgment of the importer HOW TO ACT if you notice a defect consult the manual first If this manual gives you no definite answer consult the supplier of the video baby monitor or the Alecto service department via www alecto info THE GUARANTEE EXPIRES Improper use faulty connections leaking and or incorrectly installed batteries use of unoriginal parts or accessories negligence and defects caused by moisture fire flood lightning and natural disasters With unqualified modifications and or repairs by third parties By incorrect trans port of the device without a suitable packing and if the device is not accompanied by this warranty card and the purchas
12. on Y moderate to good reception Y poor reception Once the parent unit doesn t receive a signal from the baby unit out of range or the baby unit is switched off Y no reception is diplayed and the picture turns to black Also every second sounds an alarm tone As soon as the parent unit receives the signal again from the baby unit the image lights again 6 4 DELAY IN SOUND AND VISION The baby unit sends the image and sound in digital blocks to the parent unit The parent unit turns these signals into a recognizable image and an audible sound Between the time of moving and making noise and displaying hearing on the parent unit is therefore a slight delay Also the sound and the image on the parent unit are not exactly running in sync with each other 6 5 POWER SUPPLY Baby unit The baby unit draws its power only from the supplied power adapter The baby unit has no built in battery for portable use Parent unit The parent unit is powered by 3 7V rechargeable lithium ion battery this can feed the parent unit 5 to 7 hours Top right of the display is shown the battery charge num battery is fully charged battery is 2 3 charged n battery is still 1 3 charged charging is desired battery is empty and the parent unit will turn off About 5 minutes before the battery will be fully discharged the red indicator above the display flashes Also attention beeps sound Now connect the adapter immedi
13. pansion cameras to the monitor are described in Chapter 5 4 4 AUTOMATIC NIGHTVIEW There are 6 infrared LEDs built in the baby unit these LEDs are switched on automatically when it s getting dark at the baby unit and switched off when it is getting light again These LEDs can illuminate objects to a distance of about 2 meters Note that in the dark so when the night vision LEDs are turned on the image black white is displayed on the parent unit Caution Infrared light can not be perceived by the human eye so you can not see with the naked eye that these LEDs are activated Depending on the type of infrared LED is a visible red glow however possible 5 1 5 2 6 1 SYSTEM EXPANSION GENERAL The DVM 120 parent unit can log up to 4 cameras max From the menu of the parent unit you can select the desired camera or you can display successively the images of all registered cameras scan function Expansion cameras are available through the Alecto service department on telep hone 073 6411 355 NL 03 238 5666 B of via www alecto nl REGISTER ADDITIONAL CAMERAS 1 2 TIPS AND WARNINGS GENERAL connect the adapter to the new baby unit put this adapter into a 230V wall outlet and turn on the camera push on the parent unit button and keep it pressed until after about one second xx1 xx2 xx3 xx4 lights behind the camera numbers that are already in use is shown an asterisk scroll buttons lt and P to a fr
14. ttery is fully charged button TALK talkback button to the baby unit screen built in microphone menu pushbutton My OK button and buttons A Y and 4 various functions see these instructi ons 7 audio video output 8 on off switch 9 connection power adapter 10 push briefly to switch off the screen push long to switch on the night lamp 11 antenna 12 belt clip 13 battery compartment 14 built in speaker N AA Xj ES OX OT Ps GS S 3 1 3 2 INSTALL BABY UNIT CAMERA The baby parent unit is not waterproof and therefore only suitable for indoor use Power adapter 1 Connect one of the supplied power adapters with de connector xx on the back of the baby unit 2 Insert the adapter into a 230V outlet Only use the supplied power adapter with modelnumber TGEO50P055 Make sure the baby can not touch the baby unit or the cord Place the baby unit at least 2 meters away from the baby and bundle long wires with tape or with purpose available wire ties Tabletop or wall model You can use the baby unit loose on a table closet or office setting or hang on the wall For wall mounting Drill next to each other and with a mutual distance of 3 3 cm two holes in the wall and insert plug and screw Let the head of the screw protruding a few millimeters Hang the baby unit by sliding the notches into the camera standard on the screws in the wall and by pushing the baby unit sli
15. use Either you can watch and listen to your baby continuously or you can choose to have the babymonitor been switched on when your baby starts to cry 2 FUNCTIONLIST 2 1 BABY UNIT AD N gt po en antenna light sensor switches the infrared lighting on at dusk camera lens Infrared LED s for night view registration button to register the baby unit to other parent units temperature sensor on off switch controll light constantly lit when there is an active connection h to the parent unit d flashes when there is no active connection to the parent unit built in microphone stand to place the baby unit on a flat surface or to hang on the wall 11 night lamp 12 connection for the power adapter 13 built in speaker 2 2 PARENT UNIT Hu p ID ori a E lea NIP 1 indicators green light constantly lit when there is an active con s nection to the parent unit A flashes when there is no active connection to the parent unit red light when the parent unit is switched on and the battery is charging the light will be turned on once the battery is fully charged then the light goes out when the parent unit is switched off and the adapter is being connected than the light is constantly lit doesn t go out when ba
16. when the baby cries em high sensitivity the baby monitor already turnes on when the em baby weeps softly 3 push BB button 2x to capture the sensitivity and exit the menu Push A button to swich on the video and audio manually 1 push after selecting the adjacent icon the OK button to select this function 2 set with buttons A and Y the desired display 3 press B9 button 2x to capture the setting and exit the menu The DVM 120 only displays the temperature of the room where the baby unit is placed you can not set alarm in here Note that the temperature is displayed only indicative you must consi der a possible deviation of or 2 degrees Display temperature in C of in F Multicamera Ed 1 push after selecting the adjacent icon the OK button to select this function 2 scroll buttons and Y to the desired camera to see the picture from there an asterisk behind the camera number indicates that this camera is registered or scroll lt to view all registered came ras in sequence 3 push button 2x to capture the sensitivity and exit the menu Please note that with choice every 15 seconds will be switched to the next camera there will NOT be automatically switched to a camera where sound is detected Is there no connection to the camera when it is switched to that camera out of range or the camera is off the parent unit displays a black screen during this period Instructions to register ex
Download Pdf Manuals
Related Search