CB-100 LED Color Beam LED spotlight user manual
Contents
1. Protecting the environment 12 Protecting the environment Disposal of the packaging mate rial For the transport and protective packaging environmentally friendly materials have been chosen that can be supplied to normal recycling Ensure that plastic bags packaging etc are properly disposed of Do not just dispose of these materials with your normal household waste but make sure that they are collected for recycling Please follow the notes and markings on the packaging Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive WEEE Do not dispose with your normal household waste Dispose of this device through an approved waste disposal firm or through your local waste facility When discarding the device comply with the rules and regulations that apply in your country If in doubt consult your local waste disposal facility th mann MUSIC IS OUR PASSION 43 Notes th mann 44 Notes th mann 45 Notes th mann 46 Musikhaus Thomann Hans Thomann Stra e 1 96138 Burgebrach Germany www thomann de2. or serious injury if it is not avoided NOTICE This combination of symbol and signal word indicates a pos sible dangerous situation that can result in material and environmental damage if it is not avoided th mann MUSIC IS OUR PASSION General notes Warning high voltage Warning suspended load Warning danger zone A A A th mann MUSIC IS OUR PASSION Safety instructions 2 Safety instructions Intended use This device is intended to be used as an electronic illumination effect using LED technics The device is designed for professional use and is not suitable for use in households Use the device only as described in this user manual Any other use or use under other operating con ditions is considered to be improper and may result in personal injury or property damage No liability will be assumed for damages resulting from improper use This device may be used only by persons with sufficient physical sensorial and intellectual abilities and having corresponding knowledge and experience Other persons may use this device only ifthey are supervised or instructed by a person who is responsible for their safety th mann MUSIC IS OUR PASSION 10 Safety instructions Safety DANGER Danger for children Ensure that plastic bags packaging etc are disposed of properly and are not within reach of babies and young children Choking hazard Ensure that children do not detach any small part
3. 0 Hz 110 V AC 60 Hz Power consumption 35 W Dimensions W x H x D 280 mm x 280 mm x 350 mm 25 12in x 26 14in x 4 48in Weight 3 0 kg LED spotlight 38 Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip ment so that a perfect light experience is guaranteed Please take our tips because especially in Sound amp Light caution is indicated Even if a plug fits into a socket the result of an incorrect connection may be a destroyed DMX controller a short circuit or just a not working light show DMX connections The unit offers a 3 pin XLR socket for DMX output and a 3 pin XLR plug for DMX input Please refer to the drawing and table below for the pin assignment of a suitable XLR plug th mann MUSIC IS OUR PASSION 39 Troubleshooting 10 Troubleshooting NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixers or ampli fiers In the following we list a few common problems that may occur during operation We give you some suggestions for easy troubleshooting th mann MUSIC IS OUR PASSION 40 Symptom Remedy The unit does not work no light Check the mains connection and the main fuse No response to the DM
4. Bracket for floor placement or hanging Locking screws for the mounting bracket LED spotlight Connections and controls Top side 4 E eiz oe 10 12 13 26 Bracket for floor placement or hanging Locking screws for the mounting bracket INPUT DMX input OUTPUT DMX output Fuse holder Safety eyelet IEC chassis socket for the power supply cable to the next unit IEC chassis plug for operating voltage supply LED spotlight Operation 7 Operation 7 1 Starting up the device Connect the unit to the power grid to start operation After a few seconds the display shows d001 Now the device is operational th mann 27 Operation 7 2 Main menu th mann MUSIC IS OUR PASSION Press MODE ESC for about 3 seconds to activate the main menu Press MODE ESC again to select amenu item Use UP and DOWN to change the respectively displayed value When the display shows the desired value press ENTER To return to the main menu without any changes press MODE ESC If you don t press any button for about 20 seconds the display turns off Then briefly press MODE ESC to turn it on again All previously changed setting are being stored and retained even if you disconnect the device from the mains To restart the device with standard values use the LoAd function Loading defaults on page 31 28 Operation DMX address Press MODE ESC repeatedly un
5. S TeV CB 100 LED Color Beam LED spotlight th mann user manual MUSIC IS OUR PASSION Musikhaus Thomann Thomann GmbH Hans Thomann Stra e 1 96138 Burgebrach Germany Telephone 49 0 9546 9223 0 E mail info thomann de Internet www thomann de 13 08 2015 ID 286432 V2 Table of contents na wu A A WUN Table of contents General OCS scsic ici cassis sdciiasisnssdvaa acca cas adinasasinsdadactvscvasdaceiacatzastadioaadsiusdbantdasansainiaaioaateasaadanaansanscasaaoaies 5 1 1 Further information 1 2 Notational conventions 7 1 3 Symbols and signal WOrds ssscsssscsssecssecsssecsnesesssecssecsssecsssecsescessseesasccsssecesceesseecsueessnseesseeesseenses 8 Safety mst uct ois s isiicccs ccssc cssecccssks scans cdieescicastchisstvicestisciedacssanbateeas aeascaceckisaiatiscastussiateedesbeneaateacendied 10 a un ieienkneilehiisbeiiiessehreheineihssiiieen 15 Installation EEE RE IRRE ER SERIE NE EESE E EE EENT SE 16 Starting UP piares aen ea aaaea sa oE ee Erea Easa ESAE a E rasana i fasai EY 20 Connections and controls Na EAE AO EERE 23 Operation A EPE E A R TER 27 7 1 Starting up the AeVICE LQ eesscssseccseecssecessecsncessescsscesseecssccesuccesseessscessecsnscessesesscersscceseecsnecessessnecs 7 2 M in MENU nnana E EEr R E N A REN 7 3 Settings menu te 7 4 Functions in 4 channel DMX mode Technical specifications cccccssssssssssssssssssssesssessssssesss
6. UR PASSION 18 Installation Please note that this device must not be connected to a dimmer 1 th mann MUSIC IS OUR PASSION 19 Starting up 5 Starting up Establish all connections as long as the unit is switched off Use the shortest possible high quality cables for all connections th mann MUSIC IS OUR PASSION 20 Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device Connect the output of the first DMX device to the input of the second one and so on to form a daisy chain Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor 1100 1 4 W th mann MUSIC IS OUR PASSION 21 Starting up DMX indicator When the unit is in DMX mode a flashing dot in the display indicates an incoming DMX signal Otherwise perhaps the DMX controller is shut down or the wiring is not correct th mann MUSIC IS OUR PASSION 22 Connections and controls 6 Connections and controls Bottom th mann 24 N QO WwW fH W CONTROL PANEL Display Button MODE ESC Activates the main menu and moves between menu items Closes an open sub menu without saving the changes Button UP Increases the displayed value by one Button DOWN Decrements the displayed value by 1 Button ENTER Selects an option of the respective operating mode confirms the set value
7. X con 1 If the dot behind the DMX channel indicator is not troller flashing in the display the unit does not receive a valid DMX signal Make sure that the DMX controller is switched on Check the DMX ports and cables for proper connection 2 If the dot is flashing but still without any response check the address settings and DMX polarity 3 Try using another DMX controller 4 Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or inter ference to DMX interface circuits If the procedures recommended above do not succeed please contact our Service Center You can find the contact information at www thomann de CB 100 LED Color Beam 41 Cleaning 11 Cleaning Optical lenses Clean the optical lenses that are accessible from the outside regularly in order to optimize the light output The frequency of cleaning depends on the operating environment wet smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device Clean with a soft cloth using our lamp and lens cleaner item no 280122 Always dry the parts carefully Fan grids The fan grids of the device must be cleaned on a regular basis to remove dust and dirt Before cleaning switch off the device and disconnect AC powered devices from the mains Use a lint free damp cloth for cleaning Never use solvents or alcohol for cleaning th mann MUSIC IS OUR PASSION 42
8. an change the digit on the cursor position using the UP button Use the DOWN button to move the cursor to the next position Press ENTER when all digits have been set Press MODE ESC for about three seconds to quit the settings menu All previously done settings will be saved and retained even when the device is disconnected from the mains power Activate the settings menu Press MODE ESC repeatedly until the display shows Cxxx Use the UP or DOWN button to set the desired default position for the display of two colours display shows C000 C255 When the display shows the desired value press ENTER to confirm the settings and then MODE ESC to proceed to the next menu item To change the menu item without making any adjustment press MODE ESC 32 Operation Brightness Activate the settings menu Press MODE ESC repeatedly until the display shows Lxxx Use the UP or DOWN button to set the desired default brightness display shows L000 1255 When the display shows the desired value press ENTER to confirm the settings and then MODE ESC to proceed to the next menu item To change the menu item without making any adjustment press MODE ESC Temperature monitoring Activate the settings menu Press MODE ESC repeatedly until the display shows Ptxx Use the UP or DOWN button to set the temperature at which the overheat protection should be triggered display s
9. e included in the package WARNING Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country Always secure the device with a secondary safety attachment such as a Safety cable or a safety chain th mann MUSIC IS OUR PASSION 16 Installation NOTICE Risk of overheating Always ensure sufficient ventilation The ambient temperature must always be below 40 C 104 F NOTICE Use of stands When mounting the device onto a stand ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand th mann MUSIC IS OUR PASSION 17 Installation NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixers or ampli fiers Mounting options You can install the device standing or hanging upside down When in use the device must be mounted at a solid surface or clamped to an approved truss Use the brackets provided for mounting Always work from a stable platform whenever installing moving or servicing the unit Block access under the work area The safety cable must be routed through this safety eyelet Chapter 6 Connections and con trols on page 23 th mann MUSIC IS O
10. hows Pt50 Pt99 th mann MUSIC IS OUR PASSION 33 Operation Overview settings menu th mann MUSIC IS OUR PASSION 34 7 4 Functions in 4 channel DMX mode Channel 1 2 Valu 0 2 Colour wheel 0 7 Seal 16 24 32 40 48 56 64 e 55 5 23 31 39 47 55 63 71 Function Dimmer White Dark blue Yellow Pink Green Red Light blue Orange red White and dark blue CB 100 LED Color Beam 35 Channel 36 Value TPocoll 80 8 88 9 96 1 104 1220 120 128 192 9 7 5 03 111 119 127 191 255 Shutter 0 3 A 7 8 21 5 Function Dark blue and yellow Yellow and pink Pink and green Green and red Red and light blue Light blue and orange red Orange red and white Rainbow effect counter clockwise increasing speed Rainbow effect clockwise increasing speed Closed Open Strobe effect increasing speed LED spotlight Channel Value 216 255 Functions 0 10 11 60 61 110 111 160 161 210 211 255 Function Open No function Blackout while colour wheel is rotating Sound control Blackout while colour wheel is rotating and sound control Reset the colour wheel Reset all channels CB 100 LED Color Beam 37 8 Technical specifications LED 10 W high power LED Number of DMX channels 4 Beam angle 2 Operating supply voltage 230 V AC 5
11. irect sunlight heavy dirt and strong vibrations th mann MUSIC IS OUR PASSION 13 Safety instructions NOTICE Power supply Before connecting the device ensure that the input voltage AC outlet matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker Failure to do so could result in damage to the device and possibly injure the user Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire th mann MUSIC IS OUR PASSION 14 Features 3 Features This device is especially suitable for use on show stages Special features of the device Control via DMX four channels as well as via buttons and display on the unit Sound control Colour wheel with white seven full colours split colours and rainbow effect Electronic dimmer Overheat protection Shutter frequency 0 20 Hz th mann MUSIC IS OUR PASSION 15 Installation 4 Installation Unpack and carefully check that there is no transportation damage before using the unit Keep the equipment packaging To fully protect the device against vibration dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage respectively You can install the device on the wall ceiling or floor A mounting bracket and the necessary screws ar
12. s e g knobs or the like from the unit They could swallow the pieces and choke Never let children unattended use electrical devices DANGER Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present Never remove any covers There are no user serviceable parts inside Do not use the device if covers protectors or optical components are missing or damaged th mann MUSIC IS OUR PASSION 11 Safety instructions DANGER Electric shock caused by short circuit Always use proper ready made insulated mains cabling power cord with a pro tective contact plug Do not modify the mains cable or the plug Failure to do so could result in electric shock death or fire If in doubt seek advice from a regis tered electrician WARNING Eye damage caused by high light intensity Never look directly into the light source WARNING Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy Sensitive persons should avoid looking at strobe lights th mann MUSIC IS OUR PASSION 12 Safety instructions NOTICE Risk of fire Do not cover the device nor any ventilation slots Do not place the device near any direct heat source Keep the device away from naked flames NOTICE Operating conditions This device has been designed for indoor use only To prevent damage never expose the device to any liquid or moisture Avoid d
13. ssssessesssscsscsssecsscssscsnessscssscesscsnsssscssseessesses 38 th mann MUSIC IS OUR PASSION Table of contents th mann MUSIC IS OUR PASSION 10 11 12 Plug and connection assignments nsneneneennessennsssensennsssunsssnensensnnensennsnnnnsennensnnnen 39 THOU OSH OOCIIG sssssccsssscsssscussscessesscesesacstsanscssszossens esajocetaanedeaiavictsastediatesteasestenaei Mactetaniedacsdbdtbaneanatieeints 40 Cleaning aeea a a a ARa AEE E Eee 42 Protecting the environment uuneenseensseunssenssenssennssennssnnnssunsssnnssenssensssnnssensssunssnnnnee 43 1 General notes General notes This manual contains important instructions for the safe operation of the unit Read and follow the safety instructions and all other instructions Keep the manual for future reference Make sure that it is available to all those using the device If you sell the unit please make sure that the buyer also receives this manual Our products are subject to a process of continuous development Thus they are subject to change th mann MUSIC IS OUR PASSION 1 1 Further information On our website www thomann de you will find lots of further information and details on the following points Download This manual is also available as PDF file for you to download Use the search function in the electronic version to find the topics of koera each interest for you quickly ur online guides provi etailed informa
14. til the display shows dxxx Now you can set the number of the first DMX channel to be used by the device DMX address Use UP and DOWN to select a value between 1 and 512 display shows d007 d512 When the display shows the desired value press ENTER to confirm the selection and then MODE ESC to proceed to the next menu item To change the menu item without making any adjustment press MODE ESC Make sure that this number matches the configuration of your DMX controller The highest possible DMX address is 509 Manual colour setting Press MODE ESC repeatedly until the display shows NAn Press ENTER to activate the oper ating mode Press UP or DOWN until the display shows Colr Press Enter again the display shows Coxx Now use UP and DOWN to select from 18 colour settings display shows Co00 Co17 When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To change the menu item without making any adjustment press MODE ESC th mann MUSIC IS OUR PASSION 29 Operation Dimmer setting Display reversal Temperature display th mann MUSIC IS OUR PASSION Press MODE ESC repeatedly until the display shows MAn Press ENTER to activate the oper ating mode Press UP or DOWN until the display shows diMM Press Enter again the dis play shows L
15. tion on technical basics Online guides Ouro guides provide detailed information on te alba and terms Personal consultation For personal consultation please contact our technical hotline If you have any problems with the device the Service A i customer service will gladly assist you LED spotlight General notes 1 2 Notational conventions This manual uses the following notational conventions Letterings The letterings for connectors and controls are marked by square brackets and italics Examples VOLUME control Mono button Displays Texts and values displayed on the device are marked by quotation marks and italics Examples 24ch OFF Cross references References to other locations in this manual are identified by an arrow and the specified page number In the electronic version of the manual you can click the cross reference to jump to the specified location Example See Cross references on page 7 th mann MUSIC IS OUR PASSION General notes 1 3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual Signal word Meaning DANGER This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided WARNING This combination of symbol and signal word indicates a pos sible dangerous situation that can result in death
16. xxx Now use UP and DOWN to adjust the brightness display shows L000 1255 When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To change the menu item without making any adjustment press MODE ESC Press MODE ESC repeatedly until the display shows diS Now use UP and DOWN to toggle between rdiS display text is shown upside down and d S display text is shown normally When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To change the menu item without making any adjustment press MODE ESC Press MODE ESC repeatedly until the display shows tCxx The display shows the current tem perature of the LED Press MODE ESC to quit the menu 30 Operation System reset Press MODE ESC repeatedly until the display shows rESt Press ENTER to reset the colour wheel to its default position Loading defaults Press MODE ESC repeatedly until the display shows LoAd Press ENTER to reset all values to the factory default settings Overview main menu Eat th mann MUSIC IS OUR PASSION 31 Operation 7 3 Settings menu Colour wheel th mann MUSIC IS OUR PASSION Press MODE ESC for about three seconds to activate the settings menu Use UP or DOWN to enter the units password 2323 You c
Download Pdf Manuals
Related Search