enzis installation instructions user manual important
Contents
1. BRUCK LIGHTING SYSTEMS For more assistance with technical questions please call our 15774 Gateway Circle Tustin CA 92780 technical support staff at 714 259 9959 You can also www brucklighting com contact us by email at info brucklightingsystems com SWING track pi T ART NO 140 730bz bronze S 140 730mc matte chrome TS o connection to conductive braiding must be tight top thumb screw TECHNICAL DATA Description Light Fixture Design Jorg Westerheide Dimensions length 4 Material brass matte chrome plated Supply Voltage 12V Lamp MR16 Load max 50W 1 THIS PRODUCT MUST BE INSTALLED BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED IN ACCORDANCE WITH LOCAL NEC CODE 2 FOR USE WITH ENZIS RAIL NETWORK ONLY 3 The Enzis rail system is not intended for use with a power supply cord or convenience receptacle adaptor This rail system is to be supplied by Bruck Lighting 4 Do not install the Enzis rail system in damp or wet locations 5 Do not install any part of a rail system less than 5 feet above the floor 6 Do not install any fixture assembly closer than 6 inches from any curtain or similar combustible material 7 Disconnect electrical power before adding to or changing the configuration of the rail 8 Do not attempt to energize anything other than lighting rail fixtures on the rail To reduce the risk of fi2. ignificantly higher than body temperature If connection feels warmer re tighten CONTENTS OF DELIVERY and re check until remedied Enzis Swing needs to be placed at least 6 from the 1 Swing Fixture power feed
3. re and electric shock do not attempt to connect power tools extension cords appliances and the like to the rail 9 This track system MUST BE HARD WIRED For all the wire connections use Listed Wire Nuts 10 Do not connect a rail to more than one circuit unless the rail is constructed so that it can be used with more than on circuit Check with a qualified electrician Although the rail lighting system may seem to operate acceptably a dangerous overload of the neutral may occur and result in a risk of fire 11 Secondary connections must be clean and tight to avoid arcing and overheating 12 Power Feed must be 3 inches away from any support and 6 inches away from fixture 13 Warranty is void in case of unauthorized modifications and or improper use tighten all thumb screws Insert an MR16 lamp into the fixture socket The lamp is held in place with spring clips Remove the top thumb screw so that the swing arms can be spread in a V shape and the fixture can attach to the Enzis track easily Tighten the thumb screw firmly so that the adaptor makes a solid connection with the conductive braiding Adjust all swivel joints to direct the fixture head in the desired position Tighten all thumb screws to lock the fixture in place When turning the system on for the first time turn the system off after 15 minutes and check ALL track and power connections for any heat A proper connection will NOT feel s
Download Pdf Manuals
Related Search