Home

ArcView 9 - University of Virginia

Contents

1. 31 Using Map Templates 35 Making Inset Layouts 37 Exporting Maps 38 Modifying Attributes Working with Tables 40 Converting Excel files to DBF 42 Calculating Values 44 Calculating Area Perimeter amp Length 47 Creating XY Coordinates 49 Joining Tables 51 Adding Hyperlinks 53 Creating and Aggregating Point Layers Geocoding Addresses 55 Spatial Joins 59 Querying amp Measuring Querying by Attribute 61 Queryin
2. Define Type in a name type anything it doesn t matter click Add and OK This increases the likelihood that all of your cells will be included in the new table Now you can save your document First save all changes in your Excel document Then from the File menu choose Save As and select DBF4 from the dropdown menu First Excel will give you a warning that the dbf format doesn t support multiple worksheets and that only the data in the top active worksheet will be saved Click OK Excel will then give you a second warning message because dbf is very different from xls and some formatting may be lost Just click OK When you close Excel Excel will prompt you again with these messages as though it is still incredulous that you would choose any format other than Microsoft s Humor the software and go through these two steps again As soon as you add your table to ArcView look it over to make sure that all of the data came through and are in the right format Cartographic Modeling Laboratory ArcView 9 Manual 44 Calculating Values in Tables You may find it easier to edit your attribute tables outside of ArcView but ArcView has fairly sophisticated tools for calculating values In ArcView you can edit values in an existing field or create a new field and calculate new values Keep in mind that you cannot change the format text integer long integer of an existing column so if you nee
3. You can change the size shape or color of the symbol by clicking on it but as long as Single symbol is selected all of your points will appear the same Unique Value Unique value allows you to use a different symbol for each of the points in a shapefile This can work well for small files 10 or fewer points but can quickly be overwhelming for larger files From the symbology tab click on categories under Show and unique values Using the Value dropdown menu select the field with the values you wish to use to represent your points and click the Add All Values button ArcMap will list a symbol for lt all other values gt that you can remove by taking away the check mark You can change the individual symbols by clicking on them You can make changes to all of the symbols or selected symbols hold down the shift key to select two or more by right clicking To remove a value right click on it and choose Remove Value s Use the black arrows on the far right to move values up and down the order here will be the order your values appear in the legend on your map Graduated Symbol Graduated symbols allow you to have different size symbols to represent different attribute values With the symbology tab active click on Quantities and then Graduated symbols From the Values dropdown menu select the field with the values you wish to use he default is five categories so
4. V with a word processing file Note that if the values you input are text rather than numbers you need to put single quotes around them for example BROAD When you click Apply the map features that satisfy your query will be highlighted with a bright blue outline You can perform an additional query adding removing or selecting from this selected group or close the query dialog To review the selected records right click on the map layer and go to Open Attribute Table Click on the Select button at the bottom to view only the selected records You can calculate values on an existing or new field for only the selected records for example calculating the percent of multiracial people only in block groups with non zero populations You can also generate summary statistics for only the selected records by right clicking on a column name and going to Statistics To see all of the selected records at the closest extent from the Selection menu go to Zoom to Selected Records You can create a new shapefile that only includes your selected map features by right clicking on its name in the Table of Contents going to Data and Export Data Choose the radio button regarding coordinate systems you ll probably want the default Make sure you have Selected Records chosen in the Export drop down menu To un select all records from the Selection menu choose Clear Selected Features Cartographi
5. can merge census tract files from several counties so that when you display the percent of homeowners you don t have to repeat the process of classifying your data for each county Cartographic Modeling Laboratory ArcView 9 Manual 68 From ArcToolbox you can find Append under Data Management Tools and General Under input features list all the map layers you wish to merge You can use the dropdown menu if you have added the map layers to ArcMap but you will need to add them one at a time A new layer will not automatically be created so you will need to specific and EXISTING layer in output feature This will overwrite the existing layer so be sure to make a backup copy if necessary If the columns in the attribute tables of all the input features are identical you can select TEST under Scheme Type Otherwise you must choose NO_TEST The resulting shapefile will contain all of the map features in the appended layers If the column names were the same for all of the layers as they could be for census tract files from different counties there will be values for each record in each column Keep in mind that these merged shapefiles can grow very large particularly if you merge street centerline files Clip Clipping allows you to turn one shapefile into a cookie cutter in order to cut out part of a larger shapefile For example you might need to create a map layer of streets for the
6. records or after finishing geocoding open the attribute table and sort by status to review all the U unmatched records In Philadelphia look for problems with Roosevelt Boulevard and numbered streets particularly 2nd 9th Street There is no guarantee that the matched records will be mapped in the right place Do a spot check with the Identify tool to make sure that records mapped somewhere that makes sense to you Locating an individual address If you have only an address or two to map you can take a shortcut From the File menu choose Find and click on the Address tab Next choose an address locator in the drop down menu If you have not already created an address locator you will need to do so Next type in the address in the Street or Intersection box and click Find ArcView will display the possible matches below with their score Right click on one of the addresses for mapping options You might choose to Flash Candidate Location s to make sure it s mapping in the right area or Add as Graphic s if you want a marker at the location Keep in mind that this is only a graphic it can easily be deleted or moved You can change the size and color of the graphic but you cannot turn it on and off like map layer and it has no attributes associated with it Cartographic Modeling Laboratory ArcView 9 Manual 59 Spatial Joins Tabular joins use a common unique identifier to
7. You can change the color of the dot by clicking on it under Symbol in the top right part of the screen Checking maintain density will ensure that the dot density looks the same as you zoom in and out by making the dots bigger and smaller Pie Charts Charts are good for showing multiple values and the relationship between values on different variables Pie charts are especially good for showing proportions For example individual pie pieces can be used to show the breakdown in race for the population in a census tract For the pies to work you must be able to put every person into a racial group or you must use an other category Pies contain a lot of information so it can be difficult to display them clearly To create pie charts click on Charts and Pie from the Symbology tab Holding down the shift key select the fields that you want to include Make sure that together they add up to 100 percent you may need to create and calculate a new other field in your attribute table before using charts Click on the Background button to change the color or fill Hollow or white backgrounds might be best so that you don t have too many colors in your map If you check Prevent Chart Overlap ArcView will use leader lines to indicate where the pie charts belong if there is no room to display them within the map feature Click on the Properties button to make adjustments to the look of the
8. addresses with candidate ties will appear with the unmatched addresses Cartographic Modeling Laboratory ArcView 9 Manual 57 From here you can change the address in order to get a match better match don t worry this only changes the address that ArcView uses for geocoding it does not change the data in your original table of addresses To edit an address simply click in the text box Street or intersection and make the changes then hit the Enter key ArcView will list possible matches at the bottom Highlight the best candidate and click match Street intersections are the most likely to create ties in the matching process In the example at right ArcView doesn t know if it should place the 10th and Market point on 10th Street just north or just south of Market Street Most likely it will not matter for your work If it does you are better off using a house number and street rather than an intersection Choosing the match if candidates tie box in the geocoding options will help you avoid having to match these individually When you click done a new point shapefile should appear in your table of contents If you open the attribute table associated with the shapefile you will see that the geocoding process added several fields to your original address table The Status field indicates whether the record was matched M or left unmatched U The Score field indicates how closely the record
9. anything else you added to the layout you ll want to export from Layout View From the File menu go to Export Map There are many options for export formats in the Save as type drop down menu EMF If you are working with vector data and need to import a map into Power Point or MS Word emf works very well The one drawback is that you must have ArcView installed on the computer where you open your ppt or doc or your map symbols may be corrupted These files will probably get too large to work with if you have raster data PDF The pdf format allows you to open the map directly without inserting it into PowerPoint or MS Word as long as you have Acrobat Reader This is probably the best option if you need to send someone a map or post a map on the Internet JPG The jpg format will compromise the quality of your image so be sure to click on the options button when you export and increase the resolution to at least 200 dpi The jpg format is good because it stores your map in a fairly small file and unlike emf your map will not be compromised if you open it on a computer that does not have ArcView installed TIF and EPS The tif and eps formats work well if you are going to open your maps in a graphics software package but they result in larger files Screen Capture If all else fails you can take a screen capture print screen or alt print screen and crop the image but this will not result in a presentation
10. calm and don t be ashamed to ask for help You may also have luck returning to your original files be sure to keep a copy of the originals before messing with the projection Cartographic Modeling Laboratory ArcView 9 Manual 21 Georectifying Images Georeferencing allows you to convert a paper map into a GIS map layer Essentially the process assigns X and Y coordinates to points on your digital map image shifting rotating and scaling your map so that you can view it as a map layer along with your shapefiles Create a raster image Scan your paper map The higher resolution the better ArcMap can handle pretty big files and it can work with lots of file types jpg tif bmp If you have a choice go with tif Add map image Add your image to ArcMap just as you would a shapefile or table using the button or from the file menu choose add layer Depending upon the size of your image a dialogue box will ask you if you d like to add pyramids Click OK Don t worry if you get a warning message that your image lacks projection information The name of your image should now appear in the table of contents and draw in the map view window At this point your image is in pixel space since there is no coordinate information Add reference layers shapefiles Choose an existing shapefile that contains spatial information that will help you georeference your paper map choose more than one if necessary You
11. in ArcCatalog allows you to look quickly at your data You can also view images here ArcCatalog may ask you if you want to build pyramids in order to display these more quickly which is probably a good idea Switch the preview drop down to table in order to view the attributes associated with your geographic features Click on the options button to add a new field or export the table Right clicking on a column heading allows you to access a number of other functions such as sort freeze unfreeze column delete field and statistics the statistics option is only available for numeric fields You can also access these functions in ArcMap Checking Properties Double click on the file name to bring up the shapefile or table properties or by highlighting the file name and choosing properties from the File menu With the fields tab active you can identify the data type for each of the columns in your table When you click on a column name the length of the field will appear below The column called shape will appear for your shapefiles When you click on the field name shape several new field properties appear at the bottom From the spatial reference field you can see what datum and projection have been defined if any You can change or add to this information by clicking on the From the index tab you can create attribute or spatial indexes in order to increase the speed of searching query
12. matched the street centerline file The Side field indicates on which side of the street the address was matched The Arc_Street field is the address used in the match This will be the same as the original address unless you edited it during the Interactive Review Rematching Addresses You can resume the Interactive Review even after you ve clicked done and stopped geocoding This allows you to collect additional information about unmatched addresses From the tools menu go to Geocoding Review Rematch Addresses and choose from the recently geocoded files You will need to start an edit session in order to proceed Cartographic Modeling Laboratory ArcView 9 Manual 58 Determining an acceptable match rate Aim for a match rate of at least 90 or 95 percent Be sure to write down the match rate so that you can report it later Often you will receive a list of addresses that contains some PO Box numbers or missing data that will prevent you from matching all your records Other times your addresses will look fine but simply won t match the street centerline file The most important thing to determine is if the error the unmatched records is random or systematic If you have done all that you can to gather complete and accurate addresses random error is acceptable and probably unavoidable Systematic error is not Be sure to check for patterns in your unmatched records either by interactively reviewing unmatched
13. need a shapefile that covers the same extent as your paper map and that contains several points that you can identify visually on your paper map In the table of contents put your reference layer s on top of your map image and highlight the reference shapefile Right click and choose zoom to layer From the view menu choose toolbars georeference From the georeferencing menu choose fit to display Now your reference layer s should draw on top of your map image in the view map window Add control points Click the add control points button Create your first control point on your image by clicking once on a point you can also identify on your shapefile Then click on the shapefile in the corresponding spot Double click to create a control point You may find it easier to use the magnifier window from the window menu choose magnifier Create additional control points After doing this two or three times your paper map should shift significantly to line up with the shapefile Continue to add control points as long as doing so improves the alignment Cartographic Modeling Laboratory ArcView 9 Manual 22 View Links Click on the view links button to view the coordinates of each of the control points you ve created The residuals column indicates the amount of error You may improve the alignment of your image by deleting the point s with the greatest error If you have six or more con
14. or comma delimited txt that has a field with street addresses If the parts of the address house number street direction street name and designation type are in separate fields you will need to collapse these into a single field Having a separate field with the zip code can also be helpful Creating an Address Locator You also need a shapefile that includes information about all of the streets in your area A street centerline file is made up of line segments that represent certain ranges of house numbers The line segments also contain information about which side has even and odd house numbers In order to be able to use the street file for geocoding you need to create an address locator from it To do this open ArcCatalog expand the Address Locator click on the and double click on Create New Address Locator Choose US Streets file from the list and click OK You can also use the US Streets with zone file This allows you to include zip code along with house number and street While this is a more careful approach it will generally make it more difficult to obtain a good match rate On the next screen use the folder icon to browse for your streets shapefile and click add In the Fields section below ArcView may be able to identify the appropriate fields on its own If no field names appear in the drop down menus or if they do not look right to you you ll need to identify these your
15. pie 3D rotation height Cartographic Modeling Laboratory ArcView 9 Manual 27 Click on the Size button if you want to have different size pie charts depending upon the total such as total population If you choose to Vary size using a field you may need to exclude records with a zero value To do this click on the Exclusion button and using the appropriate field name create an expression such as TotalPop 0 You may need to play with the minimum size on the previous screen to make the maximum size pie chart a reasonable size Bar Column Charts Bar charts can be used to compare values on two or more variables that do not represent proportions they don t have to be subsets that add to 100 percent For example the map on the right compares the total population by block group to the total number of households To switch from column vertical to bar horizontal charts go to Properties on the Symbology tab of Layer Properties and switch the radio button under Orientation Stacked Charts Stacked charts can be used to compare values on two or more variables such as race that are subsets of a larger variable such as total population when you don t know or don t want to display all of the subsets You have many of the same options for formatting size color that you have with the other types of charts Cartographic Modeling Laboratory ArcView 9 Manual 28 Labeling Features Labeling
16. quality map Inserting Maps into Power Point Save your map as an emf With Power Point open go to the Insert menu Picture and from file then Navigate to you map image and click Insert You may notice that there is a lot of white space around your map Eliminate this using the crop tool You must have the map image active click on it so that you see small squares at the corners Click on the crop tool and crop the image by clicking on one of the small boxes and dragging the Cartographic Modeling Laboratory ArcView 9 Manual 39 cursor if you do this without having the crop tool active you will shrink the whole image You are probably better off creating map titles in Power Point rather than ArcView Also if you are making a map specifically for Power Point consider making the legend larger than usual 14 points or more so that your audience can read it You may encounter problems exporting maps to PowerPoint if you try to show the PowerPoint presentation on another computer if it doesn t have ArcView loaded Your markers the dots and squares used to represent points on your map may come up looking like and other strange symbols This is because your exported maps are relying on the ESRI typefaces to draw these markers correctly If ArcView isn t loaded those typefaces are not available and PowerPoint comes up with the closest approximation from other typefaces There is no good way around this problem If
17. table unless you go to start editing from the editor toolbar except to add new fields or delete existing fields Sorting Records You can sort values in an attribute table by right clicking on the field name and going to sort ascending or sort descending Freezing Columns Freeze a column meaning that it will remain in view even as you scroll by right clicking on the field name and going to Freeze Unfreeze Column Summary Statistics You can bring up summary statistics for any numeric field numeric fields will be justified right by right clicking on the field name and choosing Statistics You can obtain summary statistics on additional fields from the drop down menu Selecting Records You can select a subset of your records to look at more closely in a number of different ways You can highlight an individual record row by clicking in the gray area at the far right side of the table To highlight multiple records hold the control key down At the bottom of the table ArcMap will indicate how many of the total records are highlighted Click on the Selected button to view only the selected records You can switch the selection so that all of the highlighted records become un highlighted and all un highlighted records become highlighted From the options menu choose Switch Selection You can also select all records or clear selection from the options menu Exporting Tables You may need to export
18. the Projected Coordinate Systems If a map layer is already projected AND defined you can change the projection using the same tool You will need to add the reprojected map layer to a new ArcMap document in order to see the results Defining Projection for Data Frame Ideally you will know and will specify the projection of each of your map layers Alternatively you can set the projection for your Data Frame for your map document All of the map layers listed under the Layers icon in your table of contents are in the same data frame you can have multiple data frames in the same map document although in most cases you will probably have just one Right click on the word Layer go to Properties and make the Coordinate System tab active From here you can choose a coordinate system State Plane 1983 is in the Projected Coordinate Systems folder inside the Predefined folder Cartographic Modeling Laboratory ArcView 9 Manual 20 Troubleshooting with Projections If you are unable to draw your map layers together or if your distance units do not make sense you are likely experiencing a problem with projections If you are not able to figure out the problem you may want to show your shapefiles to someone with more GIS experience It is easy to get confused while using the Define Projection and Project wizards and frequently the more you try to fix the problem the more mixed up your projections get Stay
19. the folder to the right If you intersect a line and polygon layers the resulting shapefile will contain polylines that act like lines If you intersect polygon layers the resulting shapefile will contain polygons Length perimeter and area values will be inaccurate after you perform an intersection so if you need these be sure to recalculate them Other attribute values maybe deceptive as well In the example at right census tracts were intersected with police districts The result was many sliver polygons resulting from slight differences in their digital boundaries not real differences in their actual boundaries Note that three polygons have been given the same total population based on the census tract data two of which are sliver polygons Adjusting the cluster tolerance can help you avoid sliver polygons Union Union is similar to intersection in that it fuses the boundaries of two layers together but rather than clipping the resulting shapefile to include only the area covered by both it creates a new shapefile that covers the combined extent of the layers From ArcToolbox you can find the Union function under Analysis Tools and Overlay Select the input features The default name for the new shapefile will be the first input feature name plus _Union If you want to change this or the location of the new file click on the folder to the right As with shapefiles created through intersections th
20. the identifier and attributes Aggregating Points by Polygons Using a spatial join you can also determine how many points fall in each polygon For example you might need to determine how many mortgages were made in each city council district You must have a point theme and a polygon theme in ArcMap in order to do this Right click on the polygon theme go to Joins and Relates and choose Join Cartographic Modeling Laboratory ArcView 9 Manual 60 In the first dropdown menu indicate that you want to join data to that layer based on spatial location In the next dropdown menu choose your point layer Next the radio button should be set for the second from the top option Each polygon will be given a summary of the numeric attributes of the points that fall inside it and a count field showing how many points fall inside it If your points do not all fall within your polygons for example you have a map of city council districts and points representing addresses in the city and just outside it choose the second radio button instead You can then decide if you want to summarize the attributes of your points by their areas in the boxes below Finally specify the name and location of the new area shapefile that will be created Click OK If you did not check any of the boxes to summarize the attributes of the points your new shapefile will have only one new field called count This will indicate how ma
21. the map feature to complete ArcView will show the last created vertex in red You can add a vertex to a feature by right clicking on a green line and going to insert vertex a new vertex will be created where you right click Most of the boundaries between polygons are shared boundaries In order to move the boundary for both polygons rather than creating an awkward gap you need to use the shared edit tool Click on the shared edit tool and double click anywhere on the shared boundary The shared boundary will be shown in green and the vertices along the shared boundary will become visible Move a vertex then click outside the map feature to complete Cartographic Modeling Laboratory ArcView 9 Manual 66 To save edits from the Editor menu on the Editor toolbar choose Stop Editing and say yes to saving edits Notice that you do not have a save as option You may want to make a backup of your original data before editing Merging Features In order to dissolve the boundaries between two or more polygon features you must start an edit session Using the edit tool and the shift key click on the features you wish to merge they should become highlighted then from the Editor menu on the Editor toolbar select Merge You can also select map features based on their attributes by opening the attribute table and selecting the corresponding records To save edits from the Editor menu on the Editor toolbar ch
22. uniquely identify each record TRT2000 STFID and TRACTID The table at right includes several attributes of census tracts but cannot be mapped until it is joined to a shapefile There are two fields that uniquely identify records AND match fields in the census tract shapefile TRACT and STFID The field name doesn t have to be the same in the attribute table and the shapefile in order to join them they just have to be formatted in the same way While you may perform joins on census data most frequently you can join attributes to shapefiles for other data zipcodes councilmanic districts counties You can join on a name such as neighborhood name or the name of an institution although keep in mind that differences in spelling and spacing will keep records from joining Cartographic Modeling Laboratory ArcView 9 Manual 52 Joining a table To join attribute data to a shapefile you must add the shapefile to ArcMap Right click on its name in the table of contents go to Joins and Relates and then Join Choose Join attributes from a table in the first dropdown menu In the second dropdown menu identify the key you ll use in your shapefile Next choose the table you wish to join this does not need to be added to ArcMap Finally identify the key in this table Keep in mind that ArcView is not checking to make sure that these keys match so you should double check them by opening both tables before per
23. when you use map templates ArcMap opens in Layout View You can still switch back and forth to Data View using the buttons Using inset map templates For the map templates that include insets you ll need to add at least two layers When you open one of these templates you ll see Layers 1 and Layers 2 listed in your table of contents By having two Cartographic Modeling Laboratory ArcView 9 Manual 36 separate groups of layers you can have two maps in your layout This might be two different maps or the same map at different extents Right click on Layers and go to Add Data to select the map layer for the main map in your layout Then right click on Layer 2 and from Add Data find the map layer for the inset map Creating your own template You can create your own map template by modifying an existing custom template or starting from scratch Once you have created a layout that you would like to reuse go to the File menu and Save As From the Save as type dropdown choose ArcMap Template mxt If you are not in the ArcGIS Template folder navigate to it c ArcGIS arcexe82 Bin Templates Give your template a name and hit Save Your new template will appear under the General tab when you choose to start using ArcMap with a template You must save your template in the Templates folder in your profiles location in order for it to appear under the My Templates tab If you c
24. your hyperlink Cartographic Modeling Laboratory ArcView 9 Manual 54 Adding Hyperlinks through Attribute Tables If you have more than a few hyperlinks for a map layer it might be easier to add them using the attribute table Create a new text field called Hyperlinks Start an edit session from the Edit toolbar go to Start editing Type the full name of the image file including the path for example c esri maps image tif in the appropriate record Now you need to make the hyperlink s active In ArcMap double click on your shapefile name in the table of contents and from the Layer Properties dialogue make the Display tab active Put a check mark in the Hyperlinks box and from the dropdown menu choose the field that contains your hyperlinks Now you should be able to bring up the hyperlink using the lightning bolt button Cartographic Modeling Laboratory ArcView 9 Manual 55 Geocoding Addresses Geocoding refers to the process of transforming street addresses into map features In order to geocode you need to have a table with addresses and a shapefile for streets that matches the geographic extent of your addresses Through the geocoding process ArcMap will create a new point shapefile by matching each street name and number in your table to a place along a line segment in your streets shapefile that represents a certain range of house numbers Preparing Tabular Data In order to geocode you need a table dbf
25. your table from ArcMap because you have made changes need to convert a txt table to dbf or for any other reason With your table open go to the options menu and Export Delete Field You can delete a field by right clicking on its name and going to Delete Field ArcMap will give you a warning that the deletion is permanent and not reversible Do this with caution Changes will be permanent not just within your map document but in your original file on your hard drive as well Cartographic Modeling Laboratory ArcView 9 Manual 42 Converting Excel Worksheets to DBF Tables Excel is not the only way to create new tables or to convert tables to dbf format You can also use SPSS ACCESS or other statistical and database packages But in many cases Excel will be the only software available for the job Excel can open a wide variety of formats including delimited or fixed width text Lotus Quattro Pro and web pages If you are working with one of these other formats and need to make changes to your data in Excel it is probably best to save the document as an Excel worksheet In order to add or edit a table in ArcView it must be in dbf format When you save an Excel document you can choose another format using the save as options But even if you choose dbf at this stage you may encounter problems For example your new dbf file may not include all of the cells in your original file or the columns may be formatted as str
26. Editor includes all the functionality of ArcView adding the ability to edit features in a multiuser geodatabase so that multiuser editing and versioning are possible ArcEditor also adds the ability to edit topologically integrated features in a geodatabase ArcInfo ArcInfo is ESRI s professional GIS software It includes all of the functionality in ArcView and ArcEditor adding some advanced geoprocessing and data conversion capabilities ArcSDE is ESRI s database service allowing you to manage geographic information in several different types of databases IBM DB2 Informix Microsoft SQL Server and Oracle while ArcIMS adds internet map services Introduction to ArcView 9 ArcView 9 includes two separate applications ArcCatalog and ArcMap Although they are designed to work together they run under separate executable files exe so they each have their own icons ArcCatalog works sort of like Windows Explorer It is a place to browse and manage your data You can also create and edit metadata in ArcCatalog ArcMap is where you actually create maps This is where you will spend most of your time ArcToolbox was a separate application in ArcView 8 For ArcView 9 it has been integrated directly into ArcCatalog and ArcMap Cartographic Modeling Laboratory ArcView 9 Manual 3 Introduction to ArcCatalog ArcCatalog is designed to help you manage your spatial and non spatial data Using ArcCatalog may seem awkward particularly to people w
27. Using ArcView 9 An introduction Amy Hillier Cartographic Modeling Laboratory University of Pennsylvania Cartographic Modeling Laboratory ArcView 9 Manual Introduction Introduction to ArcGIS 2 Introduction to ArcCatalog 3 Introduction to ArcMap 6 Managing amp Saving Files 10 Spatial Data Shapefiles amp Vector Data 13 Adding XY Data 15 GRIDS and Raster Data 16 Working with Projections 17 Georectifying Images 21 Making Maps Displaying Point Data 23 Displaying Area Data 25 Labeling Features 28 Designing Map Layouts
28. View 9 Manual 48 Calculating Length You may also need to calculate or recalculate the length of the line segments that make up a line shapefile such as streets or railroad tracks Open the attribute table click on Options and go to Add Field Create a field called Length choose double for the style and click OK Right click on the heading of your new column and go to Calculate Values Check Advanced and type the following into the first text box Dim dblLength as double Dim pCurve as Icurve Set pCurve shape dblLength pCurve Length Type dblLength in the second text box and click OK Changing Units ArcMap will calculate area based on the map units used for the projection in which the shapefile is stored For unprojected data this is decimal degrees not particularly helpful for understanding area For projected shapefiles the most common map units are meters and feet If you are not sure what units ArcMap is using check the spatial reference properties From ArcCatalog right click on the shapefile name and go to Properties With the Fields tab active click on the field name Shape and then click on the next to the Spatial Reference at the bottom of the Field Properties Look for the unit listed next to Linear Unit Most likely your data will be in projections using feet or meters as the map unit To convert feet to miles for per
29. abel Features To delete your labels you ll need Cartographic Modeling Laboratory ArcView 9 Manual 30 to return to the Label Properties box and remove the check mark from Label Features in this layer box or right click and go to Label Features Converting Labels to Annotation One solution to the problem that dynamic labels present for fine tuning is to convert them to annotation so that they function as individual text boxes as they do with manually placed labels To do this right click on your map layer after labeling it and go to Convert Labels to Annotation Cartographic Modeling Laboratory ArcView 9 Manual 31 Designing Map Layouts Displaying data so that you can analyze spatial patterns on a computer screen is one thing printing out a map for other people to look at is another ArcMap thinks of these as distinct functions and makes available a series of tools for designing map layouts that you don t need until you are ready to print Layout View When you open ArcMap you are in Data View and use the Tools toolbar to navigate your map When you switch to the Layout View you have access to a different range of tools and use the Layout toolbar to navigate To switch to Layout View click on the icon at the bottom of your map display that looks like a piece of paper next to the globe icon or from the View menu go to Layout View In Layout View you get a much better idea of how your map w
30. able to your existing map then close the table From the tools menu go to Add XY Data and select your table from the drop down menu ArcMap will probably have done this for you already Click ok Your table of contents should now show a new point layer that represents the centroid of your polygon layer Cartographic Modeling Laboratory ArcView 9 Manual 51 Joining Tables In GIS you can link map features to their attributes but only when your attributes are in the same file as your geographic data Often you will have attributes stored in a separate table that you will need to join to a shapefile in order to display that data This is especially common with census data when you will often obtain census attribute data SF1 or SF3 in files separate from the shapefiles for census tracts and blockgroups Identifying a key In order to join an attribute table to a shapefile you will need to identify a field that is common to your attribute table and the attribute table associated with your shapefile This field is known as a key or unique identifier because it uniquely identifies each record in your table and shapefile on which ArcView can join or match your data The values must be formatted in an identical way If they are not you must edit one of the fields or create a new field and recalculate the values so that they match perfectly At left the attribute table of a census tract shapefile contains multiple fields that
31. ake adjustments to the spacing between items in your legend Click Finish To make changes after you have created your legend double click on it to bring up Properties Adding a North Arrow You may decide that a north arrow is not necessary unless you choose to rotate your map so that north is no longer towards the top of the page in that case it is definitely necessary If you do wish to add a north arrow from the Insert menu go to North Arrow Choose a style from the North Arrow Selector preferably something simple and small You can move it around on your layout by clicking on it Double click to change the size or style Adding a Scale Bar To add a scale bar you must identify the appropriate units for your map You can set these from the Data View or Layout View From Layout View right click in the layout anywhere inside the neat lines go to Properties and make the General tab active From the map units dropdown menu choose the units used for the original map projection see Working with Projections Once this is set you can choose any display units you want To add your scale bar from the Insert menu go to Scale bar Click on a style and hit OK Your scale bar should appear on your map You can move or resize it by clicking on it Double click to bring up the Properties where you can change the number of divisions as well as the font size by clicking the Symbol button or from the fo
32. area within a single police district but your street centerline file covers the entire city Using a street file that is clipped by the police district boundaries will allow you to work with a smaller and more manageable file that looks neater From ArcToolbox you can find clip under Analysis Tools and Extract On the next screen you need to identify an input feature the layer to be clipped and the clip features cookie cutter The default name for the new shapefile will be the input feature name plus _Dissolve If you want to change this or the location of the new file click on the folder to the right You can leave Cluster Tolerance at 0 Changing it will allow slightly mismatched map layers to be considered coincident Cartographic Modeling Laboratory ArcView 9 Manual 69 Intersect Intersect allows you to fuse two overlapping layers together to create a new shapefile that includes the attributes of both layers for the area in which the layers overlap In effect this combines the union described below and clip operations You can intersect two polygon layers or a line and polygon layer From ArcToolbox you can find the Intersect function under Analysis Tools and Overlay On the next screen select the input features The default name for the new shapefile will be the first input feature name plus _Intersect If you want to change this or the location of the new file click on
33. attach an attribute table to a shapefile Spatial joins use common geography to append fields from one layer or information about a layer to another layer This allows you to assign the characteristics of an area such as a census tract or city council district to individual houses individuals or events as well as to aggregate points by areas Assigning Area Characteristics to Points Using a spatial join you can determine into what area a point falls For example you might need to determine in what census tract each of your study participants lives You must have a point theme and a polygon theme in ArcMap in order to do this Right click on the point theme go to Joins and Relates and choose Join In the first dropdown menu indicate that you want to join data to that layer based on spatial location In the next dropdown menu choose your polygon layer Next choose the first radio button so that each point is given all the attributes of the polygon it falls inside If you have points outside your polygon for example if you have a census tract map of Philadelphia with points representing addresses in the city and just outside it choose the second radio button Specify the name and location of the new point shapefile that will be created and click OK The resulting point shapefile will have as many new columns as your polygon shapefile This may include only the polygon identifier such as the census tract number or
34. ave an individual map layer lyr This file will store all the formatting changes you have made to the layer This is particularly helpful if you want to use the same layer with the same symbology in another map document As with the mxd file the lyr file only includes information about the formatting and the path to the original data generally a shapefile Moving your original data or moving the lyr file to another computer will create problems Naming Files Giving your files clear and consistent names will make working with ArcMap much easier You need to develop your own naming convention that makes sense to you ArcGIS can work with file names that are more than 8 characters but really long names can be difficult to view ArcGIS can also work with files that have spaces in their name but this will create problems if you work with the Spatial Analyst extension Your file names should help you distinguish the content and version of your data Cartographic Modeling Laboratory ArcView 9 Manual 12 Storing Files The most important thing in storing files for ArcMap is to think through a system BEFORE you start so you can avoid moving files and disabling your map documents and layers Consider creating a new directory for each new mapping project Keep all map documents in that directory Create subdirectories for tabular data that are not associated with geographic files geographic data and images Keep map layers in the subdirect
35. c Modeling Laboratory ArcView 9 Manual 62 Querying by Location The ability to query based on the location of map features is something unique to GIS and combining attribute and location queries really takes advantage of GIS functionality Select by Location To select features in a map layer based on their location from the Selection menu go to Select by Location Your first choice involves the nature of the selection Are you starting from scratch or querying a subset of map features already selected In the next box put a check mark next to the map layer s whose features you wish to select The drop down menu then provides various relationships between the features in that layer and a subsequent layer identified in the next drop down menu For distance based queries you will be able to select your units as long as the map units have been specified in the Data Frame properties The images at the bottom of the dialog change as you choose a different type of relationship as the basis of your location query they may or may not be helpful Combining Attribute and Location Queries The Select by Attribute and Select by Location dialogs do not allow you to mix the type of query But by performing one type of query first and then conducting a subsequent query on the selected records you can perform attribute and location queries on the same map layer For example you may be interested in what census tracts are located alon
36. d to transform the format of a column you will need to create a new field Creating a New Field To create a new field open your table in ArcMap you can also add fields from ArcCatalog This can be a free standing table or one that is associated with a map layer but only dbf tables can be edited Click on the options button if you do not see the options button make your table bigger it s in the lower right corner Go to Add Field If this option is grayed out you do not have permission to edit the table Most likely this is because the read only box is checked in the table properties This happens automatically when you copy data off a cd To change this find your table on your hard drive through Windows Explorer or My Computer not through ArcCatalog right click and go to properties Remove the check mark next to read only From Add Field give your field a name Do not use amp or spaces and keep your field name to 10 or fewer characters From the dropdown menu choose the type of field Short integer numeric no decimal place up to 19 characters Long integer numeric no decimal place up to 19 characters Float numeric with decimal place default is one place before decimal and 11 after Double numeric with decimal place default is 7 places before the decimal and 11 after Text numbers or letters specify length default 50 characters Date can include time and da
37. ded from the US Census Bureau are generally in this format Working with Unprojected Layers In most cases you will want to convert unprojected map layers those with a geographic coordinate system to projected map layers There are two steps involved in this process First you must create a proj file defining the map layer as uprojected then you can project the map layer using the projection of your choice You can access the tools for doing this by clicking on the ArcToolbox icon inside ArcMap Click on data management tools and then projections and transformations Cartographic Modeling Laboratory ArcView 9 Manual 18 To define the coordinate system for your unprojected map layer click on the Define Projection wizard First you will be asked to choose a data layer If you added the relevant map layer to ArcMap you will be able to find it in the dropdown menu Otherwise you will need to click on the folder icon to locate your map layer Then you can choose the coordinate system using the button Click the select button on the Spatial Reference Properties then choose Geographic Coordinate Systems North America and NAD 1983 Datum then click okay You should not notice a difference in how the map layer is drawn as a result of defining the coordinate system But as a result of defining it there is now a proj file associated with your map layer and you can look at
38. dinate system Geographic coordinate systems indicate location using longitude and latitude based on a sphere or spheroid while projected coordinate systems use X and Y based on a plane As long as computer screens and printed maps are flat projected coordinate systems will be more appropriate for working with GIS data Often you will not know the coordinate system used particularly if you inherit data or download it from the Internet If you are lucky the map layer will include a proj file which contains information about the coordinate system You can look at the information in this file the detailed spatial reference information by clicking on the general tab of the layer properties from ArcMap Alternatively you can click on the fields tab of the layer properties from ArcCatalog click inside the shape field and click on the button to the right of Spatial Reference If there is no projection information you can map the data to determine its coordinate system If the map units displayed in the gray bar below your map are in degrees seconds and minutes then you know the data are in a geographic coordinate system You may also recognize this because your maps look distorted For example when Philadelphia map layers are in a geographic coordinate system the image appears to be sagging to the east Map layers in geographic coordinate systems are sometimes described as unprojected Map layers downloa
39. draw labels depending on the extent In order to do this you need to know the exact scales you ll be using so you probably just want to leave this alone The Label Styles button gives you access to some fancier label options The highway labels are particularly helpful Now you can use the label tool to manually label your map features Click on the button marked A on the drawing toolbar and choose the Label tool The Labeling Options window will open Decide if you want ArcView to decide the best label position or if you want to determine that yourself The Choose a style radio button gives you access to those fancier labels again You can move these labels using the Select Elements tool and change their size and style double click to bring up Properties You can delete a label by clicking on it and pressing the delete key Auto Labeling You may find it easier to automatically label all of your features This saves time if you are happy with the way the labels look but it offers you much less control over the label placement When you automatically label features the labels are dynamic so changes you make to one moving it changing the style are made to all To label your map features automatically go to Layer Properties click on the Label tab and put a check mark in the Label Features in this layer box You can also label automatically by right clicking a map layer and going to L
40. e map feature type of crime at a particular address number of people living in a census tract Other Attribute Tables Often you will have attribute data in a table separate from your shapefile For example you may have a census tract shapefile with no attribute information and a table with all of the 2000 census tract data ArcMap can read dBase dbf and comma delimited text tables txt but will allow editing for only dbf tables you can convert txt tables to dbf in EXCEL SPSS ACCESS or in ArcMap You can add attribute tables to ArcMap just as you do shapefiles using the add data button or from the file menu Add Data When you add a table ArcMap will switch the table of contents from the display to source tab You can only see tables listed when the source tab is active Open the table by right clicking on its name in the table of contents and going to open Your table should have at least one column that contains geographic information This might be a street address X and Y coordinates census tract number zip code or other identifier that will allow you to match the information in your attribute table to map features in a shapefile Cartographic Modeling Laboratory ArcView 9 Manual 41 You can work with tables sort values freeze columns generate summary statistics select records and export tables without worrying about corrupting your data You cannot change any of the data in your
41. e shapefiles created by a union will most likely have some attribute values that no longer make sense Be sure to recalculate length perimeter and area if you need these variables Cartographic Modeling Laboratory ArcView 9 Manual 70 Creating Shapefiles Most of the time you will use shapefiles that someone else created Using existing shapefiles saves time and generally results in more accurate map layers But if you need a line or polygon file that doesn t exist such as a boundary for your study area you will need to create it yourself Digitizing is the process of drawing or tracing map features to create a new geographic file This process used to involve tracing a paper map on a digitizing tablet and then assigning real world coordinates to certain parts like georectifying ArcView 8 x has some great on screen digitizing tools that allow you to create new shapefiles without additional hardware or software Creating New Shapefiles Open ArcCatalog to create a new shapefile Right click on the folder where you want to store the new shapefile go to new and choose shapefile In the dialog box give your new shapefile a name and indicate what type of features the shapefile will have point line or polygon Use the Edit button to set the projection This shapefile is essentially just a shell since it contains no information But you need this before you can start to create new map features Next open ArcMap and add your new shap
42. e to buffer only the highlighted features On the next screen you choose how you want to create buffers You can make buffers based on a certain distance or based on an attribute in your map layer this would allow you to have larger and smaller buffers around different features If necessary change the distance units at the bottom of the screen You can make multiple rings of a certain distance On the final screen you must decide what to do if the buffers overlap dissolve the intersecting lines or leave them If the map layer you are buffering contains polygons you can specify whether buffers should be drawn inside outside or both Finally specify how ArcMap should save the layer If you save it as a graphic it will be temporary This is helpful if you are just playing to get the right buffer since it can easily be deleted Saving the buffers as a separate shapefile is more permanent and deleting a shapefile involves more work To save the buffer as part of an existing layer you must start an edit session and make that layer edit able Buffering can take ArcView a long time especially if you choose to dissolve the barriers within the buffers However if you do not dissolve the barriers your buffers may involve lots of separate polygons If you saved the buffers as a shapefile there will be an attribute table with records corresponding to the separate polygons making up the buffer If you choose to dissolve the barriers there wi
43. een georeferenced ArcMap will not be able to display it with other map layers ArcMap saves raster layers in its GRID format ArcCatalog recognizes GRIDs and other image formats including BMP JPEG TIFF as raster layers Images with no extension such as denst8 show below left are GRIDs If you view a GRID outside of ArcCatalog it will consist of six or so files within a directory see below right Raster Data in ArcCatalog Raster Data in My Computer pixels in scanned image cells in raster layer Cartographic Modeling Laboratory ArcView 9 Manual 17 Working with Projections Projections manage the distortion that is inevitable when a mostly spherical earth is viewed as a flat map All projection systems distort geography in some way either by distorting area shape distance direction or scale There are dozens of different projection systems in use since different systems work best in different parts of the world and even within the same parts of the world GIS users have different priorities and needs The tools for working with projections in ArcView 9 0 are more advanced than in ArcView 3 x particularly in their ability to re project layers with different projection systems on the fly They look different from the projection tools in ArcView 8 3 although they essentially do the same thing Recognizing the Coordinate System Map layers can be drawn according to a geographic coordinate system or projected coor
44. efile along with other map layers that may help you draw your new features Start an edit session from the Editor menu in the Editor toolbar choose Start Edit Session and indicate which directory contains the shapefile shell you just created Be sure that your new shapefile is listed as the Target and that Create New Features is selected from the Task menu Next you need to choose a drawing tool You have five choices The Create New Feature tool allows you to draw points lines or polygons The Arc tool allows you to create lines that are curved rather than just a bunch of short line segments that look like a curve The Distance Distance tool will place a point at one of the locations where two circles intersect The Intersection tool places a point where two lines would cross if they continued far enough The Trace tool creates features that follow existing map features Cartographic Modeling Laboratory ArcView 9 Manual 71 The Create New Features tool is the most basic and allows you to draw new map features Click to create a new vertex and double click to finish In the example at left a new polygon feature was drawn that follows four streets Use the delete tool to start over Use the undo tool to remove the last vertex To save your new feature from the Editor menu choose Stop Editing and save edits Snapping to an Existing Feature It is nearly impossible to draw features that match an existing layer ju
45. ew since they are meant to clarify printed maps not help you interpret your map on screen in fact the layout view is probably more confusing to look at from the screen because it adds so many elements and usually shrinks your map You can add text in the Layout View but you are better off trying to label features from the Data View using the label or text tools Working with Grids and Rulers You can bring up a number of options aimed at helping you to place the objects within your layout by right clicking in your layout outside of the neat lines From Options you can specify ruler units and turn on and off rulers and grids when the Layout Options tab is highlighted Choosing to snap to the grid or rulers will help you to line up objects but it will also limit your ability to make fine level adjustments Adding a Title To add a title from the Insert menu go to Title Type your title in the text box and hit the enter key or click the cursor outside the text box Double click on the title to bring up the Properties where you can make changes Adding a Legend Unless your labels are able to fully explain your map features you will want a legend on your layout ArcMap gives you great flexibility in formatting your legend and all the choices can be overwhelming To add a legend from the Insert menu go to Legend Your first choice is what map layers you want included ArcView will guess that you want to include all acti
46. features in ArcView can be frustrating and tedious but labeling features well is important to making your maps readable so it s worth the effort to learn Using Text Boxes to Label Features You can place text on a map in order to label map features This can work well if you only have a few map features to label Click on the button marked A on the drawing toolbar This will bring up four buttons Click on the A Click on your map where you want your text to appear and type your label in the text box Hit the enter key or click your cursor outside the text box to complete You can move the text around using the Select Elements tool Double clicking on the text will bring up the Properties where you can change the size and font using the Change Symbol button The callout text tool works similarly except that it allows you to place your text away from the map feature while still indicating what is being labeled Click on the tool and then click on your map feature Before letting go you can move the cursor to where you would like the label to be Type your label Using the Select Items tool you can move the text box so that it is closer or further from the map feature A third option is the spline text tool This allows you to write text along a curved line This works well for labeling rivers and curvy roads Click on the spline tool then click on the starting point for your label Continue to click along
47. five value ranges represented by different size dots should appear below Use the classes dropdown menu to change the number of categories Cartographic Modeling Laboratory ArcView 9 Manual 24 There are many ways to break up value ranges into categories The default is Natural Breaks which uses Jenks optimization to identify grouping of values that minimize within group differences To change this click on the Classify button and use the Method dropdown menu to choose a different classification system You can also adjust the cutoff points by moving the blue vertical lines in the histogram below that show the frequency of values Alternatively you can change values manually on the previous screen by clicking on them you will only be able to change the ending value For more on symbology see Getting to Know ArcMap Chapter 5 Symbolizing features and rasters pp 83 114 Cartographic Modeling Laboratory ArcView 9 Manual 25 Displaying Area Polygon Data The symbols in ArcMap can be used for any type of data points lines or polygons The following symbology schemes work particularly well with area polygon data Graduated Color You can use different colors or different shades of the same color to represent different values to create choropleth maps From Layer Properties click on the Symbology tab On the left side of the screen click on Quantities and Graduated Color Cho
48. forming the join From Advanced you can indicate what you want ArcView to do if all of the map features in the shapefile don t have a match in the attribute table or vice versa The default is to keep all records meaning that some map features might have no values for some fields Individual records might not match because of problems with the key or because there are different numbers of records in each of your files When you open your shapefile there should be new fields that contain the data from your attribute table The new field names will include the name of the attribute table from which it came The join holding the data together is not permanent so if you add the shapefile to another map document you will not have the appended data To make the join permanent right click on the shapefile name go to Data and choose Export Data This works like a save as so it creates a new shapefile Give your new file a name and location The resulting shapefile will have variable names that are much shorter than those in the table created during the temporary join Cartographic Modeling Laboratory ArcView 9 Manual 53 Adding Hyperlinks Hyperlinks allow you to click on a map feature and bring up a relevant image or website rather than just the attribute values stored in your attribute table Click on the map feature you wish to link with the identify tool Make sure that the Identify Results table brin
49. g a river but you are only interested in census tracts that have at least 100 people living in them It doesn t matter which query you do first Just be sure that the selection method you choose for the second query allows you to add remove or select from the records selected from the first query Cartographic Modeling Laboratory ArcView 9 Manual 63 Measuring Distances Using the Measure Tool The measure tool allows you to draw a line or a series of connected lines to roughly measure the Euclidean as the crow flies distance between points The measure tool will use the display units you specified in the Data Frame Properties right click on the name of the Data Frame go to Properties and the General tab Click on it and then click on your map at the starting point Move your cursor to your end point or next point repeating until you are done Double click to finish ArcMap will display the cumulative distance in the bottom left part of the GUI below the table of contents Once you move your cursor outside of the map window your results will disappear Try following a street centerline layer if you want to generate more realistic travel distances Measuring with Attribute Data If you need more accurate measures of distance than you can get using the measure tool you can use the values in perimeter polygons and length line fields of the shapefile attribute tables Select the features of interest then right click on the per
50. g by Location 62 Measuring 63 Creating Buffers 64 Creating New Geographic Files Editing Shapefiles 65 Transforming map layers 67 Digitizing Creating Shapefiles 70 Cartographic Modeling Laboratory ArcView 9 Manual 2 Introduction to ArcGIS ArcGIS is a scalable system of GIS software produced by Environmental Systems Research Institute ESRI This system contains three different products ArcView ArcEditor and ArcInfo ArcView ArcView is the desktop version meant for a general non professional audience It is the most popular desktop GIS software program but it is not the only one With the jump from ArcView 3 2 to ArcView 8 x ESRI brought ArcView into its ArcMap system so that it uses the same structure as its more sophisticated GIS products ArcView 3 x has similar functionality to ArcView 8 but the products work in very different ways ArcView 9 adds some functionality to ArcView 8 but the two versions work in a very similar way ArcEditor Arc
51. gement Tools go to Features to fine Add XY Coordinates You can check the new XY coordinates by mapping them With you table open click on Options and go to Export Say yes and add the new table to your existing map then close the table From the tools menu go to Add XY Data and select your table from the drop down menu ArcMap will probably have done this for you already Click ok Your table of contents should now show two identical point layers Adding XY Centroid Coordinates to Polygon Layer Adding the X and Y coordinates of the centroids of polygons is similar to adding X and Y coordinates to a point layer With your attribute table open go to options add new field called X type Double Right click at the top of your new column and go to Calculate Values Check Advanced and type the following in the first box that says Pre logic VBA Script Code Dim dblX As Double Dim pArea As IArea Set pArea Shape dblX pArea Centroid X Then type dblX in the smaller text box that says X in the text box directly under the X field name Click ok Follow the same steps to create and calculate a Y field changing the Xs in the VB script to Y Cartographic Modeling Laboratory ArcView 9 Manual 50 You can check the new XY coordinates by mapping them With you table open click on Options and go to Export Say yes and add the new t
52. gs up information relating to the right map layer Right click on the text in the box on the left and go to Add Hyperlink From the Add Hyperlinks box click on the folder icon and navigate to the image you wish to link Click OK and OK then close the Identify Results box You should now see a lightning bolt button in your Tools toolbar previously it would be grayed out Click on the lightning bolt and move the cursor over your map When the cursor is over the map feature with the hyperlink you should see the path name for the image appear Click on the map feature and your image should appear You can add multiple hyperlinks to the same map feature using this method To remove hyperlinks from the Identify Results box right click on the text on the right and go to Manage Hyperlinks If nothing happens when you click on the hyperlink you probably need to set or reset the default program for opening the image Find the image file you were trying to link to using My Computer or Windows Explorer right click on it and go to Properties Check the program listed next to Open with If none is listed click on Change and pick a program an image program or an internet browser for example Click OK and OK To make sure the new program can open your image file double click on the image file If the software program opens and displays your image this should also work for
53. have created an address locator you don t need to do it again unless you go to a new computer Geocoding Addresses To geocode your addresses you need to be in ArcMap You don t need to have your table with addresses OR your street file in your map document From the Tools menu go to Geocoding and Geocoding Addresses In the Add Address Locator screen click on Add and navigate to the Address Locators at the far right Double click locate your address locator click Add then click OK On the next screen you need to identify the table with your addresses the field that contains the street address and a name and location for the new point shapefile that will be created The Geocoding Options give you access to many of the same options available when you create an address locator When you click OK ArcMap begins the geocoding process The next screen indicates how well ArcView was able to match the addresses You can review different subsets of the addresses unmatched addresses addresses that matched below a certain score by checking the radio button and clicking Match Interactively If you have thousands of addresses in your address table you may not be able to review all of the unmatched records But for smaller data sets it s very important to review the unmatched records If you didn t choose the match if tie option when you set up your address locator the
54. ho are familiar with ArcView 3 x Using ArcCatalog will help you to develop good GIS habits so it s worth the effort Connecting to Folder When you launch ArcCatalog from the Start menu go to ArcGIS then ArcCatalog or add a shortcut to your desktop a list of all the folders and sub folders on your computer will be displayed on the left in the catalog tree Connect to folder allows you to make a direct connection to the place on your computer where your GIS data are stored This is not necessary but will save time You will use these same shortcuts in ArcMap and you can connect to folder from ArcMap as well From the file menu go to Connect Folder or click on the Connect To Folder button yellow arrow against a globe Navigate until you find the folder with your data and click OK Your folder should now be listed under Catalog next to a icon Seeing File Types When the contents tab is active in the window on the right catalog display ArcView will indicate the type of file using icons Shapefiles the format for geographic files in ArcView are made up of three or more separate files If you viewed them outside of ArcCatalog in Windows Explorer or through My Computer you would see all of the files listed with extensions such as dbf shp shx see example at right In ArcCatalog these various files will appear as a single shapefile ArcCatalog also indicates what kind of shapefile point line po
55. hood and then dissolving the boundaries From ArcToolbox you can find Dissolve under Data Management Tools and Generalization On the next screen you need to identify the map layer whose features you wish to dissolve under input features If the layer is already added to ArcMap you can use the dropdown menu Otherwise you will need to click on the folder icon to locate the may layer ArcMap will give the new shapefile that will be created a default name adding _Dissolve to the input layer name If you want to rename this or change the location click on the folder to the right of input feature class Next choose the column in from that layer s attribute table that contains the information you wish to use for the dissolve This must be an attribute for which multiple map features polygons have the exact same value The values can be numbers or text although keep in mind that nominal and categorical variables will work better than ratio variables If polygons have the same value but are not contiguous they will still be dissolved into a multipart feature Append Appending referred to as merging in ArcView 8 allows you to incorporate two or more non overlapping layers into a single map layer without changing their map features You can append point line and polygon layers Appending can save you time when it comes to symbolizing features and lead to more consistent symbology For example you
56. ill look when it s printed ArcMap will automatically place a border neat line around your map You can change this by right clicking on it so the line is turquoise and perforated and going to Properties Click on the Frame tab From here you can choose a different style or color frame to get rid of it altogether choose no color from the color selector You can also change the background color and add a shadow to add a shadow you ll need to change the X and Y offset to something other than 0 To make your map larger or smaller on the page you can use the zoom tools on the Tools toolbar or on the Layout toolbar The Layout toolbar also includes a pan tool that you can use to move your whole layout To move just your map and not the whole page use the pan tool in the Tools toolbar The fixed zoom tools in the Layout toolbar work like the ones on the Tools toolbar The Zoom to whole page button is especially useful Tools toolbar Layout toolbar Cartographic Modeling Laboratory ArcView 9 Manual 32 One the biggest differences in Layout View is that many more options in the Insert menu become active These options allow you to add elements including a title legend north arrow scale bar and image to your layout Each of these will be separate objects in your layout that can be moved and resized through their Properties You won t see any of them if you switch back to Data Vi
57. imeter and length divide the area by 5 280 To convert meters to miles divide by 1 609 344 To convert square feet to square miles divide the area by 5 280 5 280 27 878 400 To convert square meters to square miles divide by 1 609 344 1 609 344 2 589 988 110336 For more on conversions visit http www onlineconversion com length htm or http www translatum gr converter measurements htm Cartographic Modeling Laboratory ArcView 9 Manual 49 Creating XY Coordinates Adding XY Coordinates to a Point Layer Just as you may need to convert a table with XY data into a map layer you may need to add XY coordinates to an existing layer containing points You do this by creating new X and Y columns and using a Visual Basic script to calculating the X and Y values coordinates With your attribute table open go to options add new field called X type Double Right click at the top of your new column and go to Calculate Values Check Advanced and type the following in the first box that says Pre logic VBA Script Code Dim dblX As Double Dim pPoint As IPoint Set pPoint Shape dblX pPoint X Then type dblX in the smaller text box that says X in the text box directly under the X field name Click ok Follow the same steps to create and calculate a Y field changing the Xs in the VB script to Y You can also create XY coordinates for a point file in ArcToolbox under Data Mana
58. imeter or length field and go to Summary The sum field will indicate the total distance For example if you need to know the total length of Broad and Market Streets go to Select by Attributes and select all line segments in the street centerline file called BROAD or MARKET Then open the attribute table associated with the street centerline file right click on the length column heading and go to Summary The sum should indicate how long Broad and Market Streets are Measuring Distance with Networks Euclidean is just one method of measuring distance and a rather crude one at that Using ArcView s Network Analyst it is possible to factor in travel times and traffic patterns among other considerations Cartographic Modeling Laboratory ArcView 9 Manual 64 Creating Buffers Buffers allow you to create temporary graphics or permanent shapefiles around existing map features You can create buffers around any type of vector data points line or polyons and around selected or all features in a map layer The Buffer Wizard is a custom tool that must be added to the ArcMap interface From the tools menu go to customize and click on the commands tab From the categories list click on tools You can then drag the Buffer Wizard to one of your active toolbars From the drop down menu choose the map layer you wish to buffer If some of your layers are selected you can choos
59. ing and drawing data Cartographic Modeling Laboratory ArcView 9 Manual 5 Updating Metadata ArcCatalog also allows you to update and store metadata Click on the metadata tab to access this functionality Sometimes you will receive data that contains metadata but generally this is something you will have to add after acquiring or building a dataset ArcCatalog offers several different stylesheets that define the types of information that can be included in the metadata documentation The default is ESRI s stylesheet but you can change this from the stylesheet dropdown menu The buttons to the right of this dropdown menu allow you to in order edit metadata view metadata properties create update metadata import and export metadata Click on the edit metadata button in order to add or edit your metadata You will probably not be able to fill in all of the requested required fields but fill in as much as you can Most important are a description of the data including the date spatial extent and geographic level limits on access who can use the data contact information when and from whom did you acquire the data data values is there a data dictionary that explains the meaning of values and data quality are there known problems Other ArcCatalog Functions These are the basic functions in ArcCatalog organizing and previewing data and working with metadata ArcCatalog also has extensive sea
60. ing the snapping tool you should be able to create new features that line up with existing shapefiles even when you zoom in close If you are not happy with your results click on the map feature with the Edit tool and hit Delete you can do this even after saving edits to the shapefile as long as you start an Edit Session Digitizing using the Merge Tool The tools in ArcMap for dissolving boundaries between features provide another approach to digitizing This may give you less control over the shape of new map features but it provides an easier way of creating new shapefiles that line up with existing shapefiles In order to create shapefiles using the dissolve tools you need to have a shapefile that can serve as building blocks for your new file For example you may want to create a map of health districts If the districts are based on census tracts you can use a shapefile of census tracts to build your new district file A census block file may prove the most helpful Census blocks are bounded by streets so any new polygon feature with streets as borders can be created by dissolving the boundaries between census blocks To start add a street centerline layer and census block layer to ArcMap To avoid making permanent changes to your census block file create a new copy of it right click on it go to Data and Export Data and add it to your map With the streets and new block layers drawn zoom into the area where you wish
61. ings rather than numbers Here are some things you can do to increase the odds of preserving your data during the conversion 1 Limit your column headings to 10 characters Excel will let you have infinitely long column names but ArcView will shrink them It s better to come up with your own abbreviated names than to risk losing important information when ArcView shrinks the names 2 Check your columns to be sure that they are formatted correctly as strings left justified or numbers right justified Also look for rows at the very top that may be blank or contain data that are different from the following cells For example you may have a column named programs with values ranging from 2 10 for all of your cells but the first cell is blank or has an NR for not reported This column will be formatted as a string when you convert to dbf and open it in ArcView because dbf takes its cue from the first data cell in the column To avoid this problem you can re sort the data so that the blank cell is not on top or you can put in an appropriate numeric value such as 0 or 999 for missing data You can convert a string field to numeric in ArcView but it s easier if you start with the right format 3 When you are ready to save your data highlight all of the cells that contain values including the column names From the Cartographic Modeling Laboratory ArcView 9 Manual 43 Insert menu go to Name and
62. k with comma delimited text txt and dbase dbf files so frequently you will need to convert your tables to one of these formats before adding it to ArcMap Geographic data Geographic data are unique to GIS programs because they allow you to create maps by locating them in real world coordinates Shapefiles are the standard format for geographic data in ArcView but you can also use tables that contain X and Y coordinates for point data or convert geographic files in other formats into shapefiles Shapefiles are made up of three or more separate files that all need to be located in the same directory in order for ArcMap to recognize them as parts of a shapefile Note shapefiles are used for vector GIS data Raster GIS data are stored in files that are more similar to images Images ArcGIS allows you to import and export many different types of images The images you import may be scanned paper maps aerial photos or other pictures or photos that you hot link to your map features ArcMap can import a wide range of file types You can also export finished maps in ArcMap in a number of formats EMP BMP EPS TIFF PDF JPEG CGM JPEG PCX and PNG Map Documents If you save all of your work in ArcMap by going to the file menu save or save as you will create a map document mxd This file will save all of the work you have done including the data you have added and the changes you have made to layer properties symb
63. large You can find many more symbols by clicking on more symbols Remove the check mark next to one of the categories of symbols if you find that it is not helpful to reduce the amount of scrolling necessary to find appropriate symbols Cartographic Modeling Laboratory ArcView 9 Manual 9 You can change the color size and angle using the options on the right of the window The reset button will undo any changes you have made to the symbol since opening the symbol selector window For lines the options are similar For polygons you have choices about the fill pattern fill color and outline color The properties button will give you additional options and often too many options but may be helpful in fine tuning the crosshatch and ordered stipple patterns Cartographic Modeling Laboratory ArcView 9 Manual 10 Managing amp Saving Files ArcGIS can integrate many different types of data into maps The most common forms are tabular data and geographic data but you may also use various images Through ArcMap you can create additional types of files including map documents mxd and map layers lyr Naming and storing these files in a consistent manner will make your work with ArcGIS much easier Tabular data Tabular data includes things like comma delimited or fixed width text files Excel worksheets ACCESS files and dbase files This is where you store attribute data such as census data ArcMap can only wor
64. lculating values Editing Individual Values You many need to edit an individual value rather than re calculate values for a whole field To do this start an edit session by going to start editing from the edit toolbar You will need to specify the directory that your table is in before you can start editing you can only edit files within one directory at the same time Open your table and using the select elements tool click on the value in your table you wish to edit When you are finished go to stop editing in the edit toolbar and say yes to saving edits Finding amp Replacing Values You can find and replace values in a table systematically from the options menu In order to replace values you must be have started an edit session from the edit toolbar go to start editing Cartographic Modeling Laboratory ArcView 9 Manual 47 Calculating Area Perimeter and Length Calculating Area Usually there will be a field called area in a shapefile when you receive it that indicates the area of each polygon map feature If your shapefile is missing this field or if you have edited the shape and size of the map features you will need to calculate area Area can be especially helpful when you are trying to normalize values and create densities calculating persons per square mile for example To calculate area you must open the attribute table associated with your polygon shapefile right click on the name i
65. ll be just one record and just one polygon Cartographic Modeling Laboratory ArcView 9 Manual 65 Editing Shapefiles Editing shapefiles is tricky and a bit dangerous territory If possible use the geoprocessing tools to make changes to your shapefiles rather than using the editing tools described below Keep in mind also that editing shapefiles can change attribute values such as area and perimeter that you may need to update Deleting and Modifying Features In order to make changes to a shapefile you must start an edit session From the Editor toolbar choose start editing If you have multiple shapefiles in your map document that are from different subdirectories on your computer you will need to specify which directory will be part of the edit session you can only edit the files in a single folder at one time From the Target drop down menu in the Editor toolbar indicate which map layer you wish to edit To edit an existing feature point line or polygon click on the edit tool and click on the feature you wish to edit it should become highlighted By clicking and holding down the mouse button you can move your map feature to a new location To modify a line or polygon feature double click on it Notice that the vertices become visible and the Task menu automatically brings up Modify a Feature You can reshape your feature by putting your cursor over a vertex clicking and dragging it Click outside of
66. lygon or geocoding service In the example on the left the file hospitals shp is made up of points nis_neighborhoods shp is made up of polygons and phila_rails shp is made up of lines phila_streets mxs is a geocoding service This means that it has been indexed so that you can use it to geocode addresses By copying and pasting shapefiles using ArcCatalog you insure that you will keep all of the components of a shapefile together Tables that contain no spatial information can also be displayed in ArcCatalog The icon changes depending upon the type of table Images can also be displayed Cartographic Modeling Laboratory ArcView 9 Manual 4 Creating Thumbnails For some files including maps and layers created in ArcMap ArcCatalog will display a thumbnail image of your data when the contents tab is active To create thumbnails for shapefiles and images you cannot create thumbnails for tables click the preview tab highlight the shapefile name and click on the Create Thumbnail button Click on the contents tab in order to view thumbnails Previewing Files By making the preview tab active you can look more carefully at files When the preview drop down menu at the bottom of the window on the right is set to geography you can see what your geographic data looks like mapped You need to view your data in ArcMap in order to make changes to the way it displays but this preview
67. n the table of contents and go to Open Attribute Table From the options menu go to Add Field Call your field area choose double as the style and click ok Right click on your new field and go to Calculate Values Check Advanced and type the following in the first text box Dim dblArea as double Dim pArea as IArea Set pArea shape dblArea pArea area Type dblArea in the next box and click OK You can copy and paste this script directly from the ArcView help or from this manual From the ArcView help menu click on the search tab and type make field calculations Depending on the version of ArcView you are running the second entry that s found will include this and other scripts Calculating Perimeter As with area you may inherit polygon shapefiles with a perimeter field If not or if you need to recalculate it proceed as you would to calculate area Open the attribute table click on Options and go to Add Field Create a field called Perimeter choose double for the style and click OK Right click on the heading of your new column and go to Calculate Values Check Advanced and type the following into the first text box Dim dblPerimeter as double Dim pCurve as ICurve Set pCurve shape dblPerimeter pCurve Length Type dblPerimeter in the second text box and click OK Cartographic Modeling Laboratory Arc
68. n top To move a layer left click and hold the mouse button down then move the layer Navigating a Map There are several tools available for zooming in and out of your map The continuous zoom tool gives you the greatest amount of control Click on it then left click on your map hold down the mouse button and move your mouse away from you to zoom in and toward you to zoom out If you right click and hold down this becomes a tool for panning moving map around without changing the extent This is not a standard tool so you will need to add it See instructions on previous page for customizing toolbar Using the other non continuous zoom tools you can click on your map to zoom in or out at a fixed amount or to draw a box around the area that you want to see in more or less detail The new map will be drawn so that the area you drew the box around is in the middle of the map display The fixed zoom in fixed zoom out tools work like the zoom tools when you click them rather than draw a box Each time you click you will zoom in or out a fixed amount The pan tool works like the continuous zoom tool when you right click on it Think of the pan tool as a sticky hand Left click on your map display hold the mouse button down and shift your map Your extent amount zoomed in or out stays the same while your map moves The full extent button will zoom in or out so that all of your active checked map layers can be viewed You can also zoom in to a
69. nal copy of the layer right click on it and go to Remove The layers in only one data frame can be displayed at a given time It does not matter which one is listed first in the table of contents it matters which one is active To display the layers in a data frame right click on its name and go to Activate Creating Extent Rectangle If you want to have an overview map that shows on a larger map the outlines of the area your detailed map includes you ll need to create an extant rectangle To do this follow the instructions above to create two map layers a detail layer and an overview layer Zoom in on your detail layer in the map view and resize it in the layout view so that it looks the way you want Then right click on the overview layer in your table of contents From Properties click on the Extent Rectangle tab Move your detail layer from the left to the right side Click on the Frame button to make changes to the outline of your box Cartographic Modeling Laboratory ArcView 9 Manual 38 Exporting Maps If you just need paper copies of your maps you will probably have the best results printing them from ArcView But if you need to insert maps into Power Point or word processing files will need to export your maps Exporting Maps You can export a map from ArcMap when you are in Data View or Layout View However if you want your exported map to include titles legends scale bars north arrows and
70. ng data to your map document When you open ArcMap choose to start using ArcMap by clicking on the template radio button in the dialog box The templates listed in the General and Industry tabs provide empty layouts while those in USA and World tabs also include map layers Choose a template by double clicking on its name or clicking once and hitting OK Don t worry if the template includes colors or elements that you don t want It only provides a starting place and you will have the opportunity to customize it If you have turned off the opening dialog box by putting a check in the Do not show this dialog again box when you opened ArcMap previously go to the File menu and Open From the File or type dropdown menu choose ArcMap Templates mxt Navigate to ArcGIS s template folder probably c ArcGIS arcexe82 Bin Templates and choose a template You can t preview the templates if you access them this way Using map templates If you selected a map template that contains no data you must add one or more data layers to your map document Once you do the legend and other elements of your layout will be automatically created based on the template design Make changes to the data frame which contains your map legend scale bar and north arrow from the Properties dialog boxes right click on any of these and go to Properties You can also move the elements around click and hold down as needed Notice that
71. ny points fall into each polygon You will probably want to change the name to something that you will remember by creating a new field called MortgageCount for example and calculating it as equal to Count Now you can use this count value as the basis of a thematic map Cartographic Modeling Laboratory ArcView 9 Manual 61 Querying by Attribute In GIS you can identify a subset of map features based on their attributes or their location You may use queries as an intermediary step as part of getting to know your data to create new values or to answer your research questions Select by Attribute To start a query from the Selection menu go to Select by Attributes our first choice is what layer in your map you wish to query attribute queries are limited to a single layer In the Method drop down menu you need to decide whether you are building on a previous query or starting fresh From here the query dialog is similar to Calculate Fields Build an expression using the field names and functions connecting statements with AND or OR as necessary The values associated with each field will be displayed in the text box at the far right You can use these or type in your own If you want help working through these steps click on the Query Wizard button Click Verify to make sure ArcMap likes your expression You can import Load and save expressions using the buttons OR using Ctrl C and Ctrl
72. ojected Map Layers Sometimes the map layers you receive will already be projected but won t carry a proj file so you don t know the projection If you download the data be sure to read any metadata files that may contain information about the project If someone Cartographic Modeling Laboratory ArcView 9 Manual 19 has sent you the map layers ask them about the projection If these approaches fail try mapping the data You may recognize that the data are projected by the units showing in the gray bar below the map If they are not in longitude and latitude they are probably projected As you work with a particular projection system you will come to recognize the map units and range of coordinate values For example State Plane coordinates for Philadelphia are generally in feet and look like 2691607 78 246268 98 UTM coordinates will be in meters and look like 486850 72 4430095 19 When you add a shapefile to ArcMap that the software recognizes as being projected but has no proj file ArcMap will usually warn you that spatial reference information is missing Data that are projected but missing spatial reference information will look fine when they are drawn but you may not be able to use ArcView s on the fly projection capabilities measurement tools spatial join or geoprocessing functions If you know the projection you can use the Define Projection wizard in the ArcToolbox You will need to select the projection from
73. ology On of the biggest complaints about the shapefile format is that it does not contain information about topology Topologic formats like coverages used in ArcInfo contain detailed information about the relationships among features in the same map layer This allows for a variety of operations to ensure the integrity of lines and polygons and to carefully edit and create new geographic features In creating the shapefile format ESRI intentionally created something that is simpler than existing topologic formats for desktop rather than professional GIS users Cartographic Modeling Laboratory ArcView 9 Manual 15 Adding XY Data Sometimes you will need to map a table that just has X and Y coordinates identifying specific locations but no shapefile associated with it This might occur because a GPS global positioning system unit was used to collect the data or because that is the way a private vendor has chosen to distribute the data A table with X and Y coordinates is much easier to distribute than a shapefile because it is smaller does not involve multiple files and is not ArcView specific In order to map the data in ArcView the X and Y values will need to be included as separate columns in a dBASE or delimited text file You can add the table to ArcMap just as you would a shapefile with the add data button but you do not need to add it to ArcMap in order to map it From the tools menu choose Add XY Data and br
74. ology and the layout This mxd file does NOT save all of the data you included in your map Instead it includes information about the location of those files on your computer or network or Internet and the formatting changes you made Cartographic Modeling Laboratory ArcView 9 Manual 11 This means that you cannot move the data files you ve included in a map document without running into problems It also means that map documents are difficult to transfer from one computer to another If you do move one of the files used in your map document that layer will be shown with a next to it and will not draw when you open your map document If you click on the grayed out check mark beside the layer name ArcMap will bring up a dialog asking where you moved the file Navigating to the file in its new location and clicking add will solve the problem but this can be time consuming and frustrating and is best avoided Using Relative Paths One way to minimize problems when you move files that are part of an ArcMap document is to use relative paths If you specify that you want to use relative paths ArcView will be able to find the pieces of your ArcMap document if you move it or its components From the file menu go to map properties and click the button Data Source Options Choose the radio button Store relative path names Map Layers In addition to saving the entire workspace with a map document you can s
75. ology tab and select the field with the values you want to display Set the number of classes and the method of classification so that you are happy with the value ranges Then click on the symbols and change the fill using the symbol selector Click on the Properties button to fine tune the fill pattern Cartographic Modeling Laboratory ArcView 9 Manual 26 Dot Density Dot density maps use randomly placed dots within polygons to represent different values They provide an alternative to using choropleth maps to represent raw counts although it is important to remember and communicate to anyone reading your map that the points do not represent precise locations as they do in a point layer To create a dot density map open the Layer Properties and make the Symbology tab active Click on Quantities and dot density From Field Selection choose the field you wish to use as the basis for the map Counts such as the total number of households on public assistance are appropriate for dot density maps but averages medians and rates are not Choose your dot size or keep the default which is advisable at least to start The Min Mean and Max boxes will give you a preview of how your map will look The Dot Value indicates how many units each dot represents Change this as needed to create dot densities that have enough dots to show variation but not so many that they are all on top of each other
76. oose Stop Editing and say yes to saving edits Splitting Features Splitting polygon features involves creating a new line within an existing polygon Start an edit session and choose Cut Polygon Features from the Task drop down menu Using the edit tool select the polygon you wish to split Click on the sketch tool and then draw a line through your polygon the line does NOT have to be straight double clicking to complete To save edits from the Editor menu on the Editor toolbar choose Stop Editing and say yes to saving edits Cartographic Modeling Laboratory ArcView 9 Manual 67 Transforming Shapefiles There are a number of different functions you can perform on map layers either based on location or attribute value that result in new map layers Several of them fall under the description of overlay analysis In ArcView 8 these were called geoprocessing function In ArcView 9 they have been incorporated into an expanded suite of data management tools You must define the projection for map layers before using any of these functions If you have selected a subset of features within a map layer the functions will only be performed on the selected features Dissolve The dissolve operation allows you to collapse the boundaries between polygons if they share the same value on a particular attribute For example you could create a neighborhood map layer by assigning each blockgroup to a neighbor
77. order to make changes within an edit session you need to go the Edit toolbar and from the edit menu choose start editing You can only edit the contents of one directory at a time in an edit session so you need to identify the directory that contains the table you wish to edit While this is the more careful way to proceed it is also more tedious If you do edit a table outside an edit session it s best to create new fields rather than to edit values in an existing field since you cannot undo your work With new fields you can just delete a field and start over if you mess up Cartographic Modeling Laboratory ArcView 9 Manual 46 Calculating Values on Selected Records You can get an error while calculating values for many different reasons ArcMap will not allow you to divide by zero so if the denominator total population in example above is zero for any of your records ArcMap will not calculate any of the values To get around this you need to select only the records where the denominator is something other than zero Start by selecting the records with a zero in the denominator because there are fewer of these Do this by right clicking the field with your denominator and sorting ascending Holding down the control key highlight all the records with a zero From the options menu choose Switch Selection so that all of the records with non zero values are highlighted Now you should be able to proceed with ca
78. ory for geographic data Geodatabases With ArcGIS ESRI has introduced a new geographic data model called a geodatabase Geodatabases allow for topologically integrated features similar to coverages used in ArcInfo and define rules for the behavior of different types of objects This provides a much more sophisticated approach to storing and managing data than using directories and subdirectories and works particularly well for sharing data Cartographic Modeling Laboratory ArcView 9 Manual 13 Shapefiles amp Vector Data Vector GIS Vector is the most common model for GIS data used in the social sciences It uses points lines and polygons to represent map features Vector GIS is excellent for representing discrete objects such as parcels streets and administrative boundaries Vector GIS is not as good for representing things that vary continuously over space such as temperature and elevation Shapefiles ESRI created the shapefile format in order to represent vector GIS data in a simpler format than their coverage format used in ArcInfo As with other formats of geographic data shapefiles link information about the location and shape of the map features to their attributes Shapefiles are made up of three or more files that need to be stored in the same directory in order for ArcView to recognize them as shapefiles Other GIS programs will allow you to use shapefiles but geographic files from other GIS programs must be converted to
79. ose the field with the values you wish to use Use the Classes dropdown menu and the options in Classify to change the number of categories or method for breaking values into categories You can normalize a value in order to transform it into a rate using the Normalization dropdown menu For example in order to show the percent of households receiving public assistance normalize the total number of households receiving public assistance by the total number of households Choropleth maps are best used to represent rates rather than raw counts since raw counts can look deceptively large for large polygons alternatively you can create new fields in your attribute table corresponding to rates Graduated color works best when you use the same shade of a single color with lighter shades representing lower values and darker shades representing higher values But keep in mind that it may be impossible to distinguish between more than four or five shades of the same color depending upon the quality of your printer To fine tune colors go to more colors when choosing a color from the symbol selector Here you can play with the hue H saturation S and value V Fill Patterns You can use different patterns in addition to or instead of using different colors to represent different values Patterns are particularly helpful when you are restricted to printing maps in black and white Choose Graduated Colors from the Symb
80. owse to the table with the XY data ArcMap will probably find the appropriate fields in your table otherwise use the dropdown menus to indicate the fields containing the X and Y values and click ok As with shapefiles tables with XY data that you acquire may be projected If XY coordinates are in the form shown in the table above they are unprojected Cartographic Modeling Laboratory ArcView 9 Manual 16 Raster Data Raster GIS Raster data use grids made up of regular cells to represent spatially continuous data Each cell is assigned real world coordinates and an attribute value such as precipitation level or elevation The user defines the cell size allowing for very fine or course raster surfaces Even when the cell size is very small you can see the individual square cells when you zoom in In order to work with raster data in ArcView you need the Spatial Analyst extension When raster layers have the same size cells their values can be added subtracted multiplied divided and queried using map algebra a system developed by Dana Tomlin Raster GIS layers are essentially images made up of individual pixels just like scanned paper maps and aerial photographs You can add raster data to ArcMap just as you do vector data using the add data button menu option when the Spatial Analyst extension is available and is turned on If the raster data have no spatial information for example a scanned map that has not b
81. rch capabilities making it possible to locate files based on name location on your computer geographic location and date You can geocode addresses and work with maps and layers although these are functions that can also be done through ArcMap Cartographic Modeling Laboratory ArcView 9 Manual 6 Introduction to ArcMap ArcMap is where you create maps and access most of the ArcGIS functionality You can access some of the same functions through ArcCatalog and will need to decide for yourself which approach you find works best for you Starting ArcMap You can launch ArcMap in several ways If you are in ArcCatalog click on the Launch ArcMap button Alternatively go to the start menu ArcGIS and ArcMap or double click on a desktop icon if you created one When ArcMap opens you will be asked if you want to open an empty map use a template or open an existing map You can prevent this dialog from displaying again by putting a check mark in the do not show this dialog again box Customizing the Interface ArcMap is made up of many different windows and dock able toolbars that you can resize and move around so don t be surprised if ArcMap looks slightly different each time you open it The window that lists your map layers is the table of contents the window that shows your map is the map display You can close the table of contents by clicking on the x and resize it by holding your cursor over the right edge
82. reate a new subdirectory in the Bin Templates folder your templates will appear under a new tab with the name of your subdirectory Cartographic Modeling Laboratory ArcView 9 Manual 37 Making Inset Layouts You may need to create a printed map that includes more than one map either because you can t fit everything such as Alaska and Hawaii on your main map or because you want to zoom into a small area for your main map and indicate on a smaller map what area that covers Adding Group Layers Most of the time you will only need one data frame in a map document Working with data frames can make your map document complicated and prone to crash But if you need to include more than one map in your layout including the same map at a different extent you ll need two or more data frames When you open ArcMap you ll just have one data frame called Layer and every map layer you add to your map document becomes part of this frame To create a second data frame from the Insert menu go to Add Group Layer To add new data to a particular data frame right click on its name and go to Add Data or highlight its name and use the Add Data button or from the Insert menu go to Add Data If you want to move a layer to a different data frame once it is in ArcMap right click on it and go to Copy Then right click on the name of the data frame where you want to move it and go to Paste Layer To remove the origi
83. rmat tab Cartographic Modeling Laboratory ArcView 9 Manual 34 Adding Scale Text You may wish to include a text description of the map scale particularly if this is important to your audience and you deliberately chose a scale as opposed to maximizing the size of your map based on the size of your page To add scale text from the Insert menu go to Scale Text Double click on the scale text in your layout to bring up the Properties where you can make changes to the format and units Rotating a Map You can rotate your map to better fit the page or to make it easier to read just because you can do this doesn t mean it s a good idea If you do this make sure that you have a north arrow on your map As you rotate your map your north arrow will adjust to indicate which direction is north From the View menu go to Toolbars or just right click on a gray part of the GUI and Data Frame Tools Click on the Rotate Data Frame button then click and hold down on your map moving your map to change the rotation To restore the original orientation click on the Clear Rotation button Cartographic Modeling Laboratory ArcView 9 Manual 35 Using Map Templates Using map templates can save you time and lead to greater consistency in your printed maps You can use ArcMap s custom templates or design your own Opening map templates If you are going to use a map template you need to decide this before you start addi
84. self The Input Address Fields section allows you to identify the names for the field s in your tabular data that contain the street address You don t need to include the field name at this point Cartographic Modeling Laboratory ArcView 9 Manual 56 The Matching Options allow you to indicate the level of sensitivity for the matching process Essentially ArcView needs to match the house numbers and street names in your tabular data with information in the streets shapefile If the spelling of the street name is slightly different or an appropriate range of house numbers cannot be located ArcView will assign the match a less than perfect score 100 is a perfect match ArcView can geocode based on street intersections in addition to specific house numbers In the Intersections section you can identify symbols or AND used in your tabular data to indicate intersections The Side Offset option allows you to place points slightly away from the middle of the street centerline file While ArcView will know what side of the street your address falls on your points will appear to fall directly on the centerline unless you specify an offset 15 20 feet is adequate Under Output Fields if you check X and Y coordinates ArcView will add X and Y fields to the point shapefile with your addresses Once you click OK a new address locator should be listed under Address Locators in the Catalog Once you
85. shapefiles before ArcView can read them shp the file that stores the feature geometry point line or polygon shx the file that stores the index of the feature geometry dbf the dBASE file that stores the attribute information of features When a shapefile is added as a theme to a view this file is displayed as a feature table sbn and sbx the files that store the spatial index of the features These two files may not exist until you perform theme on theme selection spatial join or create an index on a theme s shape field pjr the file that stores information about the projection This will only exist for shapefiles with defined projections The shapefile stores information about the shape of the map features describing them in the shape field of the attribute table as point line or polygon It also stores information about the real world location of each vertex that makes up the map features Using this information ArcView can calculate area and perimeter for polygon features Cartographic Modeling Laboratory ArcView 9 Manual 14 Adding Shapefiles to ArcMap You can add shapefiles to ArcMap in several ways From ArcCatalog you can click and drag shapefiles right into ArcMap click on the file name in ArcCatalog and hold down dragging to either the table of contents or map window and letting go You can also add shapefiles from ArcMap using the add data button or from file menu go to add data Top
86. single layer by right clicking on the layer in the table of contents and choosing zoom to layer The previous extent buttons allow you to return to the extent you had before using one of the zoom tools The next extent button allows you to jump forward an extent after you have used the previous extent button Identifying Attributes of Features The points lines and polygons that make up map layers are all map features that have attributes stored in a table You can access this information in several different ways Using the identify tool click on a map feature in the map display An identify results box will display all of the information known about that feature Notice the layers dropdown menu The default in ArcMap is to display information only about the top most layer Cartographic Modeling Laboratory ArcView 9 Manual 8 Showing Map Tips Map tips are small text boxes that appear when you hold the cursor over a map feature You can determine which value in your attribute table is used in the map tips Double click on your shapefile name in the table of contents and from the Layer Properties dialogue make the Display tab active Put a check mark in the Display Map Tips box To change the primary data field make the Fields tab active and choose a field from the primary display field dropdown menu Selecting Features You can also use the select features tool to identify attributes either by clicking on a partic
87. st by looking at it Zooming in to the polygon shapefile created above shows that there are gaps between the new shapefile and the street centerline that was used as a guide This looks sloppy and can impact the result of your analyses You can avoid this problem by snapping your new lines to an existing shapefile From the Editor menu of the Editor toolbar go to Start Editing and indicate which directory contains the shapefile shell to which you want to add map features From the Editor menu choose Snapping In the top of the dialog box you can identify the layer s to which you want to snap your new features Try drawing your new features using different combinations of layers and vertices and or edges If you use a street centerline file as your guide vertices will work well Now when you start to draw your new features using the Create New Features tool your cursor will be pulled toward the vertices of the shapefile you are trying to trace To create the most accurate line move your cursor slowly over the existing shapefile clicking at each vertex to create a new vertex in your shapefile You can change the snapping tolerance the distance from the existing shapefile you can be and still snap to it from the Editor menu Options and the Genera tab The map units reflect the units you identified in the Data Frame properties General tab Cartographic Modeling Laboratory ArcView 9 Manual 72 Us
88. te Blob up to four characters Boolean Finally determine the scale number of places and precision number of places to the right of the decimal point or accept the defaults by leaving them 0 NOTE You can also add a new field from ArcToolbox under Data Management Tools then Add Field Cartographic Modeling Laboratory ArcView 9 Manual 45 Calculating Values Outside an Edit Session To calculate the value of your new field or an old field right click on its name and go to Calculate Values ArcMap will ask you if you are sure that you want to calculate values outside an edit session warning that you will not be able to undo your results Say yes ArcMap will bring up the Field Calculator If your value is a constant you can simply type the value in the box at the bottom More likely your new value will be based on values in other fields so you will need to use the calculator You can create an expression by double clicking on the field names For example to calculate the percent of the population 65 and up click on the field name with the total 65 and up click on the button and click on the field name with the total population If any of the records in your table are highlighted ArcMap will only perform calculations on the highlighted records You can also calculate values from ArcToolbox under Data Management Tools then Calculate Field Calculating Values In an Edit Session In
89. the curve you don t need to make many clicks and double click to finish Then type your label in the text box You will probably need to try this several times to get a label with which you are happy just click on the label with the Select Elements tool and hit the delete key to delete a label Cartographic Modeling Laboratory ArcView 9 Manual 29 Manually Placing Labels Using the label tools in ArcMap rather than the text tools allows you to use the values in a layer s attribute table for your labels in other words you don t have to type the label out as you do with the text tools By manually placing labels you also avoid having your labels act as a group which means it s easier to move or edit a single label Before you can use the label tools in ArcMap you need to indicate which field in the attribute table of your map layer you want to use as the basis for labels From Layer Properties click on the Labels tab Leave the label features in this layer box empty Choose the appropriate field from the Label Field dropdown menu Click on symbol to change the size style or font for your labels Guessing what size to make your labels is difficult and you will probably need to make small adjustments after seeing what works Using the Placement Properties button you can instruct ArcView what to do about duplicate labels The Scale Range allows you to instruct ArcView when to draw or not
90. the detailed spatial reference information Before you define a layer as unprojected ArcView will refer to it as assumed geographic In order to project the map layer click on the Project wizard If you are projecting a shapefile use the Project wizard listed under Features If you are projecting a raster image use the project wizard listed under raster As with the define wizard you will be asked to specify the map layer Next because you will be changing the original layer you are asked to name the new layer that will be created By default ArcView will add _Project to the original name Click on the button to the right of Output Coordinate System to choose your projection Click on the select button on the Spatial Reference Properties then choose Projected Coordinate Systems Now you need to choose your projection For relatively small areas like Philadelphia the differences in projection systems the distortion in shape area distance direction and scale are minimal You are best off choosing whatever projection system is most commonly used In Philadelphia that is State Plane 1983 feet Pennsylvania South For the Philadelphia MSA consider UTM zone 18N After making your selection click okay ArcView will indicate that there is a Datum conflict between map and output In order to map your newly projected layer create a new ArcMap document Working with Pr
91. to create new features Use the label tool to identify street names that s why you need the street file census block files don t contain street names Using the Select Features tool highlight the blocks that cover the area of your new feature You can select multiple features by holding down the shift key You can also draw a box around the area containing the individual features this is faster To dissolve the boundaries between the blocks start an edit session then from the Editor menu choose merge Stop editing and save edits to finish If your new shapefile only needs to include this single map feature you can right click on the block shapefile with the new feature still selected go to Data and Export Data Be sure that the Export drop down menu indicates that only selected features will be included Alternatively you may need to repeat the process of dissolving boundaries so that all census blocks become part of a new map feature
92. trol points you can perform a second order If you have six or more control points you can perform a second order transformation if you have twelve or more control points you can perform a third order transformation Rectify Image In order to permanently save the transformation choose rectify from the georeferencing menu ArcMap will create a new image rather than changing your original data Check the ArcMap Desktop Help if you want information about choosing a resampling type You don t have to rectify your image If you want to revert to your original un georeferenced image from the georeferencing menu choose reset transformation Cartographic Modeling Laboratory ArcView 9 Manual 23 Displaying Point Data ArcMap offers a wide range of colors and symbols for representing your point data The real strength of a GIS is in allowing you to use different symbols to represent different values linking your attribute data to your spatial data Single Symbol The default in ArcMap is to represent all points with the same size shape and color symbol This is how ArcMap will display your point shapefiles when they are first added to a map document or when you create them through geocoding or adding XY data Open the layer properties double click on the shapefile name or right click and go to Properties and click on the Symbology tab In the box on the left side single symbol will be highlighted
93. ular map feature or by drawing a box around the feature s of interest The selected features should become highlighted with a blue outline Right click on the map layer that contains the feature s of interest and go to open attribute table This table includes all the attributes of all the features in that layer In order to view just the selected feature s click on the selected button at the bottom of the table You can also highlight a feature on the map by clicking on a row in the table You can change the selection color from options in the selection menu It is also possible to use different colors for each layer Double click on a map layer or right click and go to properties Choose the selection tab and then select the last radio button Show selected features with this color This will only change the selection color for this map layer Changing Map Symbols ArcMap has many options for changing the way your data are displayed Some of the simplest options involve the choice of color fill pattern and shape for point data To make changes click on the map symbol in the table of contents The symbol selector window that opens will look different depending upon the type of layer point line or polygon For points you can choose a different marker from the default which is a circle with a black outline When you choose a new marker the default size jumps from 4 point quite small to 18 point quite
94. until your cursor changes to a two headed arrow Left click and drag the edge to resize this window To move one of your toolbars left click on the end top or left hold down and move to a new location Adding Tools and Toolbars To add or remove a toolbar left click anywhere outside of the table of contents map display or toolbar somewhere gray or from the view menu go to toolbars Anything with a check mark next to it will be displayed You can also add new buttons to your toolbars from the customize option One especially helpful button allows you to zoom continuously Choose the commands tab scroll down to pan zoom then right click on the Continuous Pan and Zoom button on the right and drag it to your tools toolbar the toolbar with the outline of a hand and an image of a globe in the middle and release Cartographic Modeling Laboratory ArcView 9 Manual 7 Working with the Table of Contents The table of contents has two tabs at the bottom display and source When the display tab is active the table of contents will only list data that can be drawn as a map layer When the source tab is active the table of contents will also show tables along with the path indicating where the data are stored Turn on and off a layer by checking and unchecking the box next to it Layers are drawn in the map display in the order in which they are shown in the table of contents Map layers listed at the top will draw o
95. ve layers This may not be the case if you have layers such as a county boundary rivers or other obvious features that don t need to be included in the legend To remove a layer from the legend click on its name on the right side of this first screen and click on the lt button The order your layers are listed under Legend Items will correspond to the order in which they appear in your legend To change the order click on the name and hit the up or down arrows don t worry this won t affect the order in which they are drawn Cartographic Modeling Laboratory ArcView 9 Manual 33 If you want more than one column in your legend make the adjustment here To see what your legend will look like before working your way through the rest of the screens click the Preview button If you are satisfied with it you can click the Finish button and skip the other steps Otherwise click the Preview button again and click Next On the second screen of the Legend Wizard you can give your legend a title or leave the word Legend as the title or just leave it blank The third screen allows you to create a frame and shadow around your legend not necessary but depending upon your layout it may be helpful particularly if you gave your layout a background color On the fourth screen you can change the symbols and symbol size used to represent lines and polygons in your layout On the final screen you can m
96. you use pdf files or screen captures you can avoid the problem but will sacrifice image quality and flexibility Inserting Maps into Microsoft Word You will have greater control over the placement of your map if you import it to Power Point first then copy it into Word From Power Point click on your map image and hit the copy button or Ctrl C In MS Word hit the paste button or Ctrl V You can move your map around by clicking and dragging it or by using the arrows on the right side of your keyboard Hold down the Control key while using the arrow keys to make small moves nudge You can crop your map in MS Word From the View menu go to Toolbars and Picture Cartographic Modeling Laboratory ArcView 9 Manual 40 Working with Tables Attribute Tables for Shapefiles Every shapefile has an attribute table associated with it You can open the table by right clicking on the shapefile name and going to open attribute table The table will have as many rows or records as it does map features The total number of records will be shown at the bottom of your table here can be any number of columns or fields Two are standard FID the feature ID and Shape which can be point polyline or polygon The rest of the fields will vary There should be a field that identifies each map feature with a unique name such as a census tract number or neighborhood name There may be additional fields identifying attributes of th

Download Pdf Manuals

Related Search

Related Contents

La citation picturale : enjeux et problématiques  Bedienungsanleitung  MAXDATA PC Handbuch Manual Ma- nuel Manuale  User Manual  - PostSharp  Collage des Vitrages  WorkCentre 4250/4260 Multifunction Device Evaluator Guide  3 再発・類似事例の発生状況  PDFダウンロード  Philips Passive 3D glasses PTA416  

Copyright © All rights reserved. Failed to retrieve file