Owner/User Manual
Contents
1. 1 Gently slide the battery cover off of the remote control 2 Remove the old AAA battery observing the symbols on the battery and replace with a new AAA battery 3 Gently slide the battery cover on to the back of the remote control 4 Testoperation of the remote control 2014 Voxx Electronics Corporation All rights reserved 13 CODEMLRM Code Systems Inc Limited Lifetime Warranty Code Systems Inc CODE warrants to the ORIGINAL PURCHASER of this CODE vehicle security product the Product purchased from an authorized CODE dealer that except as provided below should this Product under normal use and conditions be proven defective in material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGINALLY INSTALLED such defect s will be repaired or replaced at CODE s option without charge for parts directly related to repairs of the defect s Switches indicator lights and transmitter cases are similarly warranted to the original purchaser for a period of one 1 year from the date of purchase of the Product CODE accessories sold separately are covered by the applicable warranty accompanying the accessory This warranty is non transferable non assignable and is voided when 1 the Product is removed from the vehicle in which it was originally installed or 2 the vehicle in which the Product was originally installed is transferred to another party This warranty does not apply to an2. Minute Press 93 to increase to decrease Alarm Clock ON OFF Press 3 to turn ON or to turn OFF Countdown Timer Hour Press 93 to increase to decrease Countdown Timer Minute Press to increase or to decrease Countdown Timer ON OFF Press 9 to turn ON or to turn OFF ca5554 Owners rev A LCD Remote Control ICON s 9 LOCK aJ TRUNK RELEASE Zz TRANSMITTING 6 A ENGINE RUNNING A RAR 000 BATTERY INDICATOR SAVE SX TIMER TEMP Ba START MODES amp VIBRATE SILENT MODE EN Z J 2CARMODE 2014 Voxx Electronics Corporation All rights reserved UNLOCK VALET MODE PANIC TIME DISPLAY BATTERY SAVE MODE TIME COUNT DOWN MELODY MODE ALARM CLOCK Transmitter Button Functions 1 Way Lock Unlock Car Find N A Operation Method Transmitter Panic Lock x Press and Release Unlock Press and Release Trunk Push and Hold 3 Sec Car Finder Press and Release Panic Push and Hold 3 Sec Remote Start Press and Release 1 or 2 times depending on selectable option Remote Start Shut Down Push and Hold 3 Sec Run Time Press and Release 4 times Extention pally Si Press Lock Start Timer Temperature Press Unlock Start While Armed Start 2 Way P Lock Unlock Car Find i Start Function Operation Method Transmitter Panic Lock x Press and Release Unlo
3. COLDEZITLZnmltr Deluxe Vehicle Remote Start System with 900Mhz 2 Way Confirming LCD Remote Control IMPORTANT NOTE The operation of the Security and Convenience System as described in this manual is applicable to most vehicles However due to the configuration of some vehicles some functions AND OR SAFETY PRECAUTIONS may not apply Please see your installing dealer for more information 2014 Voxx Electronics Corporation All rights reserved Table of Contents Using Your Remote Control u 3 Using the Keyless ENY u aiite erre ceci 3 Two Stage Door Unlock 3 Activating Trunk Release optional 3 Activating AUX 1 optional ve Using the Progressive Car Finder Feature 3 Using the Personal Protection 3 Programmed Transmitter Notification 4 Malet MOde nitet rrt err eer nei ene ber 4 Eliminating Lock Unlock Notification Chirps 4 Using Your Remote Starter eere rere 5 Remote Start Ready MOJE rsisi 5 Cancelling Remote Start Ready 5 Remote Starting Your Vehicle necne 6 Re
4. Theengine is over revved tach checking only Valet mode is active ca5554 Owners rev A Additional 2 Way LCD Remote Control Functions Check Vehicle Status Press and release P 2 times then press within 3 seconds the transmitter will display the current status of the vehicle Display Illumination Press and hold the F button for 1 second The display will illuminate for 5 seconds Melody Vibration Mode To have the remote control vibrate play a melody tone or both each time it receives a response from the vehicle press and release F then press and hold 9 for 2 seconds Button Beeps To toggle button beeps on or off press and release F then press and hold for 2 seconds Battery Save Mode While in POWER SAVE MODE the 2 way LCD transmitter will NOT look for any incoming signals from the main unit until a button is pressed The LCD screen will display SAVE to indicate that power save mode is ON To enter power save mode press and hold F for 5 seconds Clear Flashing Icons and Melody Sound Press the F button 3 times within seconds This will clear the melody sound and flashing icons on the LCD screen Button Lock Press and release then press hold the for 2 seconds to toggle the button lock on or off When the button lock is active the remote control will beep vibrate 2 times when a button is pressed indicating it is locked Illumination Press and release 2 times then press and hold for 2 seconds to tog
5. ave other rights which vary from state to state ca5554 Owners rev A 2014 Voxx Electronics Corporation All rights reserved 15 Voxx Electronics Corporation Customer Service 1 800 421 3209 WWW CODE ALARM COM FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS 210 of Industry Canada Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including any interference that may cause undesired operation Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment PATENTED www voxxintl com company patents ca5554 Owners rev A
6. ck x Press and Release Trunk Push and Hold 3 Sec Car Finder Press and Release Panic Push and Hold 3 Sec Remote Start Press and Release 1 or 2 times depending on selectable option Remote Start Shotdbwm Push and Hold 3 Sec Run Time Extention Press and Release 4 times x Press Lock Start Timer Menu x Press and Hold Press Unlock Start While Armed 12 ca5554 Owners rev A Replacing Remote Control Batteries 1 Way 4 Button Remote Control Model CAT4 The batteries inside each remote control should last approximately 1 year under normal use When the batteries become weak you will notice the remote control range the distance from the vehicle the remote control will work deteriorate and the small LED on the remote control will dim To replace the remote control batteries 1 Using a coin disassemble the halves of the remote control 2 Remove the old battery observing the symbols on the batteries and replace with a new battery 3 Reassemble the halves of the remote control 4 Testoperation of the remote control 2 Way LCD Remote Control Model CATLCD The AAA battery inside the 2 way LCD remote control should last approximately 6 months under normal use When the battery becomes weak you will notice the remote control range the distance from the vehicle the remote control will work deteriorate and the BATTERY icon on the LCD remote control will show 1 bar or less
7. e audible response Two Stage Door Unlock Optional If this feature is enabled on your system pressing the button one time will unlock only the driver s door Press again within three seconds to unlock the remaining doors Activating the Trunk Release Feature Optional The button is used to open the trunk of the vehicle To open the vehicle s trunk press and hold the 2 button for 3 seconds Activating AUX 1 Optional If this feature is enabled on your system pressing the and buttons simultaneously will activate an optional feature This feature can be programmed for a wide range of functions like power window or sunroof automation please consult your installing dealer to determine the functionality of your system Using the Progressive Car Finder Feature Press the lt button to locate your vehicle The system will flash the parking lights and sound 5 times at low volume increasing in volume each time the button is pressed Using the Personal Protection Alarm Panic Press and hold the button for 3 seconds to activate the personal protection alarm During panic mode the normal function of the transmitter buttons will be suspended The transmitter s and buttons can be used to lock and unlock the door if the option is installed To stop the alarm press and hold the button on the transmitter again for 3 seconds The system will automatically stop after 30 seconds 2014 Voxx Electronics Corporation All r
8. gle illumination on or off When on the display will illuminate when it receives or sends a command 2014 Voxx Electronics Corporation All rights reserved 2 Car Mode To control a second security system enter 2 car mode by pressing then press and together for seconds When the lll icon appears on the transmitter s LCD screen it will control the second security system Use the same method to exit 2 car mode and resume control of the original vehicle s security system NOTE A second security system must be installed and the LCD transmitter must be learned to it before this feature will operate the additional system Parking Meter Countdown The parking meter countdown timer has 6 preset times to access the preset times and begin countdown press and release P then press and hold for 2 seconds each additional press of will increase the countdown time Adjusting the Clock and Timer Settings The clock alarm clock and programmable countdown timer are accessed through the Function Menu Press and hold for 3 seconds to access the function menu once you have accessed the feature menu press and release F to scroll through each feature and follow the steps below to adjust the settings for each Press and hold F for 2 seconds to exit the menu Clock Hour Press to increase or to decrease Clock Minute Press to increase or to decrease Alarm Clock Hour Press to increase or to decrease Alarm Clock
9. he ignition key a Setthe parking brake b Place the transmission in neutral 2 With your foot off the brake pedal press and release the 2 button 2 times within 2 seconds The LED will flash 3 times and the parking lights will turn on to confirm the system has entered quick stop mode 3 Remove the keys from the ignition the vehicle will remain running in quick stop mode 4 Exitthe vehicle and close all vehicle doors Within 1 minute of step 1 press the button to lock the vehicle s doors The vehicle will shutdown and sound 2 short chirps then 1 long chirp to confirm ready mode is set Cancelling Remote Start Ready Mode The system will exit remote start ready mode if any of the following occur Open any door Open the hood or trunk if connected Press the brake Release the parking brake Turn the ignition ON 2014 Voxx Electronics Corporation All rights reserved Remote Starting Your Vehicle To activate the remote start function press and release the 2 button 2 times within 2 seconds The system will sound the parking lights will flash 1 time and the system will check the vehicle to ensure it is safe to start If all safety parameters are correct the vehicle will start within 5 seconds The vehicle s parking lights will turn on or flash depending on system settings as a visual indication that the vehicle has started and is running If your vehicle stalls or does not start the system will pause 5 seconds then try 2 m
10. he vehicle will start 24 hours from this time Next When you are finished operating the vehicle for the day perform the following steps to complete the process 1 Turn the ignition ON OFF vehicle must be disarmed 2 Within 10 seconds while pressing the brake press and release the button twice 3 The vehicle will emit 2 chirps and flash the parking lights 4 times 2014 Voxx Electronics Corporation All rights reserved Temperature Start Mode The system has the ability to start the vehicle if the temperature drops below a preset temperature threshold Once activated the system will only start the vehicle one time based on the temperature setting and will be cancelled if the vehicle is started with the key or remote started by the transmitter Temperature is read from the module located below the dashboard in most instances and the vehicle s interior temperature may vary from the ambient temperature 1 The vehicle must be armed 2 Press and release both the amp Q buttons together 3 The vehicle will emit 1 chirp and flash the parking lights 1 time Note This feature is defaulted OFF and must be set in option programming Remote Start Safety Features For safety and security reasons the system will shutdown or prevent the remote vehicle starter from activating if any of the following occur 1 The vehicle hood is open 2 The brake pedal is pressed prior to turning the ignition key to the ON position 3
11. ights reserved Programmed Transmitter Notification As a security precaution each time the vehicle s ignition is turn on the status LED light with flash the number of transmitters programmed into the system This helps to identify unauthorized transmitters from accessing your vehicle If you believe an unauthorized transmitter has been programmed to your system contact your installing dealer for assistance Valet Mode Valet Mode is used to disable the system from remote starting To enter or exit valet mode simply follow the 4 steps outlined below Turn the vehicle s ignition ON Push and hold the programming valet button The LED will turn on solid when valet mode is active Release the programming valet button co o cx Eliminating Lock Unlock Notification Chirps System lock and unlock notification chirps can be toggled ON or OFF without entering the programming feature banks 1 Turn the ignition ON then OFF 2 Press and release the valet programming button 3 times The system will respond with 1 chirp for ON or 2 chirps for OFF ca5554 Owners rev A Using Your Remote Starter Remote Start Ready Mode must be enabled if your vehicle is equipped with a manual transmission Remote Start Ready Mode Manual Transmission Vehicles Only To activate the remote start function the system must first be in Remote Start Ready Mode Follow the steps below to enter remote start ready mode 1 While the engine is running by t
12. mote Start ShutdOWt certare rennes 6 Entering Your Vehicle while it is Running via Remote Start t Preheating or Precooling the Vehicle s Interior 6 User Programmable Run Time Run Time 7 Using the Quick Stop Feature ees 7 Operating the Daily Start Timer eret 7 Temperature Start Mode ironia tenia 8 Remote Start Safety Features 8 Additional 2 Way LCD Remote Control Functions 9 LCD Remote Control ICON s esses 11 Transmitter Button Functions esee 12 Replacing Remote Control 13 Warranty Information u u u 14 ca5554 Owners rev A Using Your Remote Control Using the Keyless Entry The button is used to lock the vehicle s doors the button is used to unlock the vehicle s doors To lock or unlock the doors simply press and release the desired function button one time For your convenience the parking lights will flash once when the doors are unlocked and twice when the door are locked NOTE The system is equipped with a feature called Silent Choice If enabled the System requires a second press of the or 9 button to activate an audible locking unlocking response from the vehicle If your system is set up for 2 step unlock a third press of unlock will activate th
13. nd the time remaining is 4 minutes extending the run time will reset the countdown timer to 15 minutes and your vehicle will continue to run for another 15 minutes Follow the steps below to extend the vehicle s run time 1 The remote start must already be active 2 Press and release the 2 button 4 times 3 The system will chirp 1 time and flash the parking lights 4 times to confirm that the run time has been reset Using the Quick stop Feature Automatic Transmission Vehicles If you want to make a short stop and keep your vehicle running to keep the interior warm or cool the quick stop feature allows you to do this while keeping your vehicle secure and your keys with you To engage quick stop 1 Stop the vehicle and place the transmission in PARK 2 With your foot off the brake pedal press and release the 2 button 2 times within 2 seconds The LED will flash 3 times to confirm quick stop is entered 3 Remove the keys from the ignition and exit the vehicle Press the 9 button to lock the vehicle s doors if desired Note Do not leave children or animals unattended in the vehicle when using the quick stop feature Operating the Daily Start Timer The system has the ability to start your vehicle based on a 24 hour countdown timer This feature requires a two part activation sequence From the remote while in range of the vehicle pressing both the amp 2 buttons together will activate the 24 hour countdown timer t
14. ore times to start the vehicle a total of 3 attempts The system will pause 5 seconds between each start attempt If the vehicle does not start after the 3rd attempt the system will abort the remote vehicle start process Note Do not leave children or animals unattended in the vehicle when using the remote start feature Note Manual transmission vehicles Remote Start Ready Mode must be set Remote Start Shutdown Press and hold the 2 button for 3 seconds to turn the vehicle off Entering the Vehicle while it is Running via Remote Vehicle Start 1 Unlock the vehicle s doors 2 Enterthe vehicle DO NOT PRESS THE BRAKE PEDAL 3 Insert the key into the ignition switch and turn to the ON or RUN position 4 Press the brake pedal The remote vehicle starter will disengage and the vehicle will operate normally Preheating or Precooling the Vehicle s interior Before exiting the vehicle set the temperature controls to the desired setting and operation After the system starts the vehicle the heater or air conditioner will activate and heat or cool the vehicle s interior to your setting ca5554 Owners rev A User Programmable Run Time Run Time Extension The system has the ability to allow the user to extend the time the vehicle will be running under control of the remote start This will only extend the run time back to the current run time setting during the current remote start cycle If your system is set to run 15 minutes a
15. y product damaged by accident physical or electrical abuse im proper installation alteration or use contrary to its intended function fire flood or other natural acts In order for the Product to be repaired or replaced under the terms of this warranty the defective Product must be returned to an authorized CODE dealer and accompanied by a copy of the retail sales receipt The date of purchase and year make and model of the vehicle in which the Product was originally installed must be clearly indicated on the sales receipt This warranty is exclusive and CODE MAKES NO OTHER WARRANTIES EXPRESSED OR IMPLIED ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY IN NO CASE SHALL CODE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY EXPRESS OR IMPLIED WHATSOEVER CODE does not warrant that the Product cannot be compromised or circumvented THE EXTENT OF CODE S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND IN NO EVENT SHALL CODE S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE ORIGINAL PURCHASER OF THE PRODUCT WITHOUT INSTALLATION LABOR Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation may not apply to you This warranty gives you specific legal rights and you may also h
Download Pdf Manuals
Related Search