BabySeat II
Contents
1. and of proper size and adjustment for the operator See bicycle owner s manual for additional bicycle loading information Make sure not to overload your bicycle when using the BabySeat and rack and make sure not to attach additional luggage or accessories to the rack BabySeat rack is designed for use on 26 wheel and 700C wheel bicycles only Bicycle operator and child should always wear helmets which have been approved by nationally recognized standards The bicycle operator should avoid busy streets bad weather and ride with extra care and reduced speed Make sure BabySeat safety harness is fastened correctly and firmly over child Never leave child alone unattended in BabySeat Rear seats that are fixed to the luggage carrier shall have an additional fastening not removable from the seat which shall be attached to another part of the cycle and limits rearward movement of the seat When walking bicycle with child in BabySeat hold rack with one hand and hold handlebar with the other Tighten fasteners securely before each use and check them frequently Before each ride ensure the mounted BabySeat does not interfere with braking pedaling or steering of the bicycle Do not allow any of the child s body clothing shoe laces or toys to come in contact with moving parts of the bicycle e g wheels and brakes and recheck as the child grows Do not carry a child that is too young to sit safely i2. 2012 M TCS2201 02 GB 05 12 BabySeat II Remove BabySeat II From Rack 1 Press the yellow and red Remove the slide lock then buttons at the same time push into storage position d a Please contact your Topeak dealer with any questions For USA customer service call 1 800 250 3068 www topeak com
3. User s Guide It is recommended a professional bicycle shop assemble and install the BabySeat II to your bike It is imperative that you read this owner s manual prior to installation Load Class A22 22kgs 48 5lbs TOOLS REQUIRED FOR ASSEMBLY 5mm Allen Key Topeak Babyseat II Art No TCS 2201 TCS 2202 EN 14344 Getting To Know Your Topeak BabySeat 4 Mounting Rack To Bicycle 6 Mounting BabySeat To Rack Surface 8 Securing BabySeat To Seat Post 9 Opening Grab Bar 10 Adjusting Height Of Footrests 11 Fitting Your Child In BabySeat 12 Release Seat Pad 13 Eautlon Notes same 14 NOUO ounts wWUuG These pages will help you to identify the different parts of your Topeak BabySeat ILLUSTRATED PARTS LIST 1 SEAT 9 SLIDE LOCK WITH BUTTON in storage position 2 RACK 10 REFLECTOR 3 GRAB BAR 11 SHOCK ABSORBING BASE 4 GRAB BAR PAD 12 SPRING BARREL x 2 5 SEAT PAD 13 SECURING BUCKLE 6 FOOTRESTS x 2 14 BACK LOOP 7 FOOT STRAPS x 2 15 LOWER HOLE 8 QUICK ADJUST LEVER FOR FOOTRESTS x 2 16 BACK HOOK MAINTENANCE Please use mild soap and water to clean BabySeat Seat pad safety harness and grab bar pa
4. d should be hand washed only Occasionally lubricate rack and BabySeat hardware with Teflon based lubricant Teflon is a registered trademark of DuPont KW DWG Follow these illustrations for mounting rack to bicycle Make sure rack is level with ground before tightening hardware Several adjustments are available to help level rack Slide rack hardware forward or back to determine correct positions before tightening Philips screws on rack surface A CAUTION The Topeak BabySeat is designed to work on frames with seatstay rack mounts AND threaded dropout eyelets only Do not use the Topeak BabySeat on frames without these fittings for safety reasons BabySeat Rack w o disc Mounts BabySeat Rack w disc Mounts Attach base of rack strut to frame rear dropout Most frame dropouts provide more than one mounting point N WG Mount BabySeat on rack Remove slide lock from storage position Hook seat onto front rail of rack Rotate seat down on Press the red button and pull the slide rack surface until snapped into positive engagement lock back away from seat Install slide lock on rack Press red button and push Make sure positive engagement click slide lock back into rack is heard and red button is protruding through hole in rack surface y Y CAUTION If sliding lock fails to slide into rack or if red button does not protrude through the rack surface the i
5. ken or damage parts of the babyseat 29 Ensure initially and to re check from time that the child s weight and size do not exceed the maximum capacity fo the seat 30 The cycle may behave differently with a child in the seat Particularly with regard to balance steering 3 and braking 1 The stated distance between the center of gravity mark and front of the rear wheel axis should be less than 100 mm e Failure to comply with these operating instructions can lead to serious injury or death of the bicycle operator and or child e Additional security devices shall always be fastened e For safety reasons this seat shall only be fitted to luggage carriers WARNING conforming to ISO 11243 WARRANTY Stamp and signature of Topeak dealer 2 year Warranty All mechanical components against manufacturer i N defects only Warranty Claim Requirements To obtain warranty service you must have your original sales receipt Items returned without a sales receipt will assume that the warranty begins on the date of manufacture All warranties will be void ifthe product is damaged due to user crash abuse system alteration modification or used in any way not intended as described in this operating manual The specifications and design are subject to change without notice Please contact your Topeak dealer with any questions For USA customer service call 1 800 250 3068 ae www topeak com y Copyright O Topeak Inc
6. n the seat Carry only children that are able to sit unaided for a longer period of time 18 Make no modifications to the BabySeat and rack 19 Never ride the bicycle at night without adequate lighting 20 Always remove BabySeat from the rack when the bicycle is being transported on a motor vehicle 2 This is necessary because the force of the high wind on BabySeat may degrade or damage BabySeat or the rack to the point that they will not perform reliably Presence of a child carrier on a bicycle may require alteration of the method used by the rider to mount or dismount the bicycle Care must be taken whenever the rider gets on or off the bicycle 22 Ensure that there are no sharp objects which the child can touch e g frayed cables 23 When no child is being carried fasten the retention system buckles so the straps do not hang loosely 24 Advice that child in babyseat need to be more warmly clothed than riders and child should be protected from rain 25 Check any excessive temperature e g due to direct exposure to sun of the seat before placing the child in it 26 Cover any exposed rear saddle springs to avoid any possible injury 2 N Ensure that the restraint system is not loose or able to become trapped in any moving parts particularly the wheels including when the cycle is ridden without a child in the seat 28 Please connect your nearest Topeak authorized bicycle dealer if you found any bro
7. nstallation is incorrect If your saddle has exposed springs please cover springs adequately to prevent pinching child passenger Never modify BabySeat or rack from their original specifications Do not attach additional luggage to the child carrier Recommend to carry such loads at the opposite end of the cycle e g in the case of a rear seat to use a front luggage carrier Ensure that your bike is stable before installing or removing BabySeat cow T type loop and hook strap is a safety device designed to connect BabySeat and seat post Please be sure to fasten it to seat post immediately after mounting BabySeat on rack The T strap should only be disconnected from seat post if removing BabySeat from rack Adjust length of T type strap Fasten T type strap to seat post UG gt Lift lever to adjust height Push lever down to lock of footrests Adjust the foot strap as necessary A CAUTION NEVER LEAVE CHILD IN BABYSEAT WITH ONLY THE KICKSTAND SUPPORTING THE BICYCLE 1 Have someone help support bicycle while placing child in BabySeat 2 Place child in comfortable position in BabySeat Il Adjust and fasten safety harness over child 3 Note position of child s feet and legs and tighten the foot straps after placing child in comfortable position Remove child from BabySeat and adjust footrests as necessary 4 Don t use the BabySeat if any part is broken Zu BabySeat sho
8. ulder buckle straps adjust in a high or low position Make sure they are in the correct position for your child s size Shoulder Strap Is Too Low A CAUTION Low Position Make sure the buckle straps are assembled correctly on the back side of B BabySeat as shown above 12 Release the buckle strap J from back side IOREAK TOPEAR 1 Ga 4 Remove the fastener on the both sides of BabySeat Release strap on the bottom of seat pad and release the buckle strap Release the buckle strap from back side of seat pad and remove the seat pad from the back hook behind BabySeat Carry only a child who is able to hold his her head up while wearing a correctly sized bicycle helmet The age and weight limits for the BabySeat rack are 1 4 years old and 20lbs 48 5lbs 9kgs 22kgs respectively Never exceed these limits Bicycle operator s age must be at least 18 years old The load of a baby carrier may lessen the stability and alter the riding characteristics of the bicycle particularly regarding steering and braking Make sure bicycle is stable and under control when loading and unloading child This baby seat system is not compatible with rear suspension bikes The bicycle to which the BabySeat and rack is mounted must be in good working order of a type appropriate for the additional load
Download Pdf Manuals
Related Search