Instructions - 298kb - pdf
Contents
1. plex LED Duo User manual 152 627UK Version 1 0 User Manual LED Duoplex 152 627UK LED DUOPLEX For indoor use only operating Pay special attention to Sections 3 amp 5 CAUTION Please read this manual carefully before of this document 1 General introduction This stand alone LED light effect combines ultra bright LEDs with the latest in optics technology to produce an amazing array of colours and patterns It is simple and easy to use with no complicated DMX just two modes of operation Automatic which always runs in the background and sound to light which is activated by adjusting the microphone sensitivity This effect is ideal for the mobile DJ or for use as a small fixture in bars or nightclubs Features 4 colour light effect Red Green Blue Amber 128 ultra bright LEDs Easy to use with plug and play capabilities Automatic always running and sound to light modes Mounting bracket We recommend that this product is used within the guidelines HSG95 qtxlight 2 User Manual LED Duoplex 152 627UK User Manual LED Duoplex 152 627UK 12 Functions guide 2 Package contents The unit will always run in automatic mode until sound is detected Please check the contents to ensure that the product has been received in good condition 14 Disposal Light x 1unit IEC Power Lead x 1 User s Guide x 1pcs AN If you find any accessory is missing or the lighting has arrived with any es Please2. disposal of the unserviceable device according to the current problems please contact your local dealer at once This product contains no statutory requirements serviceable parts to make no attempt to try to fix or modify this item yourself as you may invalidate the warranty We recommend you keep the original 15 Technical specification package and proof of purchase for any possible replacement or returned demand Voltage 100 240Vac 50 60Hz LED 128pc R G B A 3 Installation Fuse T3A Fast blow This product is for professional use only and every person involved with the Dimensions 280 x 280 x 190mm installation operation and maintenance of this device should be qualified and follow the instructions of this User Guide We recommend that this product is Note Conforms to Laser and LED Safety standard BSEN60825 1 2007 not used for audience scanning and should be used within the guidelines of radiation of lasers used for display purposes HSG95 copies of the guidance Manual copyright protected by QTX Light can be downloaded from the HSE website http www hse gov uk pubns priced hsgq95 pdf When you connect to the main power supply the device will illuminate and the light effect will change with music when in sound activated mode atxlight 10 atxlight 3 User Manual LED Duoplex 152 627UK 4 Mounting instruction The fixture may be mounted in any position provided there is adequate room for ve
3. he fuse is intact 7 2 If the unit is not reacting to music check the unit is in sound to light mode and that the sensitivity control is fully clockwise qtxlight
4. ions rows CES OE AN DO NOT OPEN Risk of electric shock IN Do not expose to moisture or rain POWER IN 230VAC 50Hz Power on and off IEC Power in Microphone a oo i r Sound sensitivity control qtxlight 9 User Manual LED Duoplex 152 627UK 10 Layout atxlight gr 2 ee Lens Mounting bracket Thumb screw Housing User Manual LED Duoplex 152 627UK Do not use the device during thunderstorms and please disconnect the power Do not use solvents or aggressive detergent to clean the device Use a soft and clean cloth Do not modify the device or the connected power cord without authorization Use appropriate safety rope Do not stare into the light this product emits hazardous levels of optical radiation and will cause serious injury to the eyes if viewed at close range This product should be securely mounted so that its output emission is always directed away from people and at objects that are able to reflect emission in a hazardous direction In this regard the separation distances cited in HS G 95 should be observed The symbol q E mf determines the minimum distance from lighted objects The minimum distance between light output and the illuminated surface must be more than 0 5m qtxlight 5 User Manual LED Duoplex 152 627UK 6 Connect with power supply Use the plug to connect to the main power supply as following 7 Replacing fuse Disconnect from the main power supp
5. ly first then remove the fuse from the IEC Socket or fuse holder Replace with a fuse of the correct rating as stated on product label or user guide 8 General maintenance To maintain optimum performance and minimize wear fixtures should be cleaned frequently Usage and environment are contributing factors in determining frequency As a general rule fixtures should be cleaned at least twice a month Dust build up reduces light output performance and can cause overheating This can lead to reduced lamp life and increased mechanical wear Be sure to power off fixture before conducting maintenance Unplug fixture from power Use a vacuum or air compressor and a soft brush to remove dust collected on external vents and internal components Clean all glass when fixture is cold with a mild solution to the cloth or tissue and drag dirt and grime to the outside of the lens Gently polish optical surface until they free of haze and lint The cleaning of internal and external optical lenses and or mirrors must be carried out periodically to optimize light output Cleaning frequently depends qtxlight 6 User Manual LED Duoplex 152 627UK on the environment in which the fixture operates damp smoky or particularly dirty surroundings can require cleaning fluid Always dry the parts carefully Clean the external optics at least every 20 days 9 Quick trouble shooting 7 1 If the unit does not function Check that the main power is on and t
6. ntilation It is important never to obstruct the fan or vent pathway Mount the fixture using a clamp Unscrew the safety screws underneath the device and fix a G Clamp to the fixture After finding desired position tighten the G Clamp When selecting installation location take into consideration routine maintenance Safety cables must always be used Never mount in places where the fixture will be exposed to rain high humidity extreme temperatures changes or restricted ventilation The product should be securely mounted so that its output emission is always directed away from people and at objects that are able to reflect emission in a hazardous direction In this regard the separation distances cited in HS G 95 should be observed 5 Caution For your safety please kindly pay attention to all of the warnings below Always plug in the power plug last and disconnect from the mains when the device is not in use or before cleaning Do not install and operate the device in rain or extreme heat moisture or dusty environments This device is for indoor use only and in a dry environment Do not switch on immediately but wait until it reaches room temperature if the device has been exposed to drastic temperature fluctuations Do not shake the device and avoid brute force when installing or operating atxlight a User Manual LED Duoplex 152 627UK 11 Rear display atxlight FE 7 3 IDuoPrLEx Please read instruct
Download Pdf Manuals
Related Search