GMOS JI100S User Manual ENG 0827 2015
Contents
1. MA Product Show Room Download Shop Dealers News Customer Service a Product Show Room Download Shop Dealers News Customer Servi Manual SpeedAngle R4 KML Converter USB Driver SpeedAngle R4 is a simple yet powerful tool to analyze your ride With G force color cod Manual SpeedAngle R4 KML Converter USB Driver the trace and its unique graphs of speeds lean angles and longitudinal G s it provides 2 FTDI USB Driver for Windows setup executable clues to help relive your riding motions find your riding style and improve your cornering Hold your mouse key and drag to define an area to create an Area Report R4 has integr the original Track Manager software with it So you can managed track settings with R4 can even edit a track setting directly on the trace After download double click on the file to start installation Please download SpeedAngle R4 and unzip first Double click on the icon to launch it No installation procedure is required Download SpeedAngle R4 01 4 Oct 01 2014 Then follow the steps below 1 Unzip R4 Double click on the USB driver to start installation 2 Connect the dashboard unit and your computer with the sup OO plied USB cable Power on your GMOS dashboard unit GMOS _ iw Saken ro will enter USB mode automatically and display USB CON NECTED on the device screen 3 If this is your first time connecting to this computer your Windows2. Finish Line was being set automatically As a result the GPS position of the Line drifted away from the actual location To avoid such deviation try to set the Track when at least two of the lines in the GPS Antenna Icon are shown Also make sure that your dashboard is installed with a clear view of the sky away from the fuel tank area If you would like to change the line width after a Line has been set please go to SpeedAngle R4 Track Manager to configure the setting Another reason might be that the track crossing direction was set in reverse As a result your crossing was viewed as invalid by GMOS To change the crossing direction please go to SpeedAngle R4 Track Manager to configure the setting The third reason might be that a wrong Track was selected As the track Finish Line location was not in your area hence the Line was never crossed Troubleshooting 29 Q Why did the latest record list the record of my sessioin before last instead of my latest session The record will not be overwritten until you cross the Finish Line and produce a lap time in a new session If you did not cross the Finish Line in the new session there was no new lap and thus no new record Q Why was the USB CONNECTED message not prompted when my GMOS was connected to my PC Please make sure you use the supplied USB cable 5 pin male mini USB and that the USB cable is connected to the USB ports of the computer and the dash board unit secur
3. a new Track at or overwrite Track15 Til ZA 12 30 LAPTIMER 12L 75 LEFT VIEW LATEST RECORD SET FL AT TRCK15 Yul TZ 12 30 fvza 12 30 Exit the or VIEW LATEST RECORD SET FL AT TRCK15 Menu SET NEW TRACK 15 TRK 01 SACUIT WEST START TIMER 90KMH STOP TIMER 20s IDLE LINE WIDTH 100M TIMER STARTS AT 90KMH TRK 07 SACUIT FULL START TIMER 90KMH STOP TIMER 20s IDLE LINE WIDTH 100M Starting Timer and Data Logging Start your session when GMOS is in Standby Screen Just ride along Once the starting speed is reached GMOS will set a new Finish Line only when designated to start the Timer and data logging automatically and then use the Track selected or newly set to produce lap times every time a Line is crossed Using GMOS 19 You can control at what place the Timer is to start by adjusting the starting speed Here are a few suggestions Timer start location Suggested Starting Speed Right close to where you are 10 After exiting the pit lane 90 or 120 On a straight 150 or more e To set the starting speed press MENU to enter Laptimer Menu Data logging starts automatically and simultaneously with the Timer All your GPS traces speeds G s angles and lap times will be recorded Please note that if the memory is full during data logging GMOS will stop logging and display MEMORY FULL in the Message Area This will not affect any Timer functions Stopping Timer and Data Logg
4. pow ered on e Lean angle degrees less than including 15 will not be displayed in Max Right Left Angle e To clear the record please go to System Menu and select RESET TOP ANG AND SPD Lean Angle Meter shows real time lean angle up to left right 69 degrees Message Area displays messages about log recording The message will be displayed for about 2 seconds There are five messages that may appear in the Message Area START LOGGING END LOGGING displayed when GMOS starts ends data recording This is an additional reminder besides the REC icon POSITIONING displayed when SELECT is pressed to start recording but there are not enough satellites to provide all the GPS positioning data necessary for starting a new log such as location time and date The system will continue search ing for more satellites Sometimes this may take up to a few minutes During this process the GPS Antenna Icon will not be displayed When you see the GPS Antenna Icon reappear press SELECT to start recording Using GMOS 13 MEMORY FULL displayed when SELEGT is pressed to start recording but the system memory is already full or during data logging when the memory is full In the latter case the system will continue to function except that the recording will stop Please download your logs and then clear the memory to release the memory space LOGS FULL displayed when SELECT is pressed to start recording but the
5. suggestions Desired FL location Suggested Starting Speed Right close to where you are 10 On a straight 150 or more The key is to keep your speed below the designated starting speed until you reach your desired Finish Line location Using GMOS 21 Stay Close to the Center Line When setting a Finish Line it is essential that you stay close to the center line of the track This will ensure that _ s the reference point is in the middle of the track so that the Finish Line will extend evenly to both sides and cover the Stay close to the center Finish Line width of the track lane Adjust Line Width Beforehand If Necessary If necessary before setting the Track enter Laptimer Menu to adjust Line Width according to the size of the course and the quality of GPS reception The width is 100M by default However if your track is small and very winding such as a go kart course adjust the width to 60M In some very small circuits you may even need to set the reference point outside the track lane to make sure the Line does not extend to the next neighboring lane and cause unwanted crossings set the reference point outside the track so that the line does not extend to the next neighboring lane Line Width 60M This can be done with SpeedAngle R4 Track Manager For more information please see the tutorial video on www speedangle com download in the Speed Angle R4 section Linear Track The way to set
6. the pointer of the lean angle meter is in sync with the real time measurement you might see the reading of the latter larger than the former when the calibration is in effect In such cases the reading of the Angle History and Max Angles should be taken as valid Please note that all the logged data have been calibrated Please also note that in the rare cases where the interaction is too severe to be com pensated by the calibration mechanism the calibrated lean angle measurement might still be exaggerated sometimes to as high as 69 degrees or be discarded as invalid by the GMOS Filter CONTENTS GMOS OVERVIEW Le 1 What Is in the Package ren 1 Introduction and Functions sicicciccsscsevesecionsicuisakiesetsectdacdiustvistescediucdsaneaemiucsbetess 1 Motion and Trace 4 2 EaP LINO Serea EA EAA EPE EEA A E S 2 GMOS at a Glance errrnnnnnnnnnnnnnnnnnnnnvnennvnnnevnnnnnnnnennnnnnevnennnnnnevnnnennnnennenennnnenenn 3 EVASION EEE E E E EEEE EEE 3 gt 2 6 CERES EEE E 3 NT 4 INSTALLING GMOS erannnnnnnnununnnnnnnnnnnnnnnnnnunununnnnnnnnnnnnnnveunnnnvnnnnnnnnnnnnnnnnnnnne 5 Installing Dashboard Unit 5c cic overtee creeds em eieeene cess tom etian Scat acme aee sd eigen noaseneeeies 5 FOGN uE EE E E E EE E E A AT 5 Ta ed te 1 6 EE EE EE EE DE 5 With 3M Dual LOCK Tape rrrrrrnrnarnannnnnnnrnernernarnnnnnnnnnnnennernannnennnnnee 5 With AMPS pattern Mount rrrrrranonnrnnnrnnrnanenernanenannnnnnasnnnnnnsnnennesnnn 5 With a
7. the Finish Line for a linear track is just a little bit different from setting for a closed track The easiest way Is to use Track Manager of SpeedAngle R4 to set and upload your Finish Line Otherwise ride to your Finish Line location set the starting speed at 10 recommended and follow the steps below Turn GMOS on Ignore any Tracks found and select SET NEW Speed up to above your starting speed Keep riding till you see the Timer running Now the Finish Line has been set Using GMOS 22 Go back to your Start location Enter Laptimer Menu make sure SET FL AT TRACK15 js off and then select the Track you have just set Track 15 Exit Menu GMOS will prompt the Track you designated in Standby Screen Now you are ready to go GMOS will start the Timer when you reach the starting speed and produce lap times when you ride past the Finish Line location Configuring the Timer In the Laptimer Menu you can e view the Lap Time Report of up to 14 latest logs e activate Auto Set to set a new Track at Track 15 later e designate a Track to use later e designate the Timer starting speed e designate at what idle time the Timer is to stop e designate the length of the Finish Line e designate what is to be displayed as Main Display or Sub Display and e designate how long the Main Display and Sub Display are to be held after updated In the Laptimer Menu pressing SELECT will execute the function selected or adjust th
8. then press SELECT to confirm GMOS will enter Standby Screen preparing to set a new Track at or overwrite Track 15 Using GMOS 18 Til vz 12 30 vill WA 7 55 PLEASE SELECT ONE PLEASE SELECT ONE SACUIT EAST MENU SACUIT EAST SACUIT WEST SACUIT WEST 08 25 12 14 38 08 25 12 14 38 SET A NEW TRACK SET NEW TRACK 15 SET A NEW TRACK TIMER STARTS AT 90KMH Selecting Track To Use Manually If you regret your choice and would like to select a Track manually press MENU in Standby Screen to enter Laptimer Menu Then follow the steps below e Make sure SET FL AT TRACK15 IS Off e Press MENU to go to TRK e Press SELECT till you find the Track that you want e Exit the Laptimer Menu GMOS will list your selection on the Standby Screen Til vz 12 30 LAPTIMER 12L T5 LEFT VIEW LATEST RECORD SET FL AT TRCK15 OFF START TIMER 90KMH STOP TIMER 20s IDLE LINE WIDTH 100M Yul vz 12 30 LAPTIMER 12L T5 LEFT VIEW LATEST RECORD SET FL AT TRCK15 OFF Exit the Menu SACUIT FULL START TIMER 90KMH STOP TIMER 20s IDLE LINE WIDTH 100M TIMER STARTS AT 90KMH Activatng Auto Set Track 15 Manually If you regret your choice and would like GMOS to set a new Track press MENU in Standby Screen to enter Laptimer Then follow the steps below e Press MENU to go to SET FL AT TRACK15 e Press SELECT to switch it on e Exit the Menu GMOS will prepare to set
9. will search for the driver and install it automatically Wait till it shows Your Device Is Ready to Use Sometimes this may take up to a few minutes USB CONNECTED Installing device driver software Your device is ready to use oe 11 44 N ee EH anon 11 41 2014 10 1 Bees i Using GMOS 26 4 Double click on the SpeedAngle R4 icon to launch it 5 Click on the MENU button at the bottom left go to Tools gt Log Downloader WID Track WMDate VTime Custom Field VI From 1 Duration Track For more information such as preloading track settings or modifying Finish Line location after a log has been recorded please watch the tutorial videos on www SpeedAngle com Download SpeedAngle R4 section GMOS utilizes high speed download to save download time If you are download ing with a laptop and are encountering download errors please set the battery management plan to HIGH PERFORMANCE If you are using communication softwares such as Skype close it as well Using GMOS 27 ES TROUBLE SHOOTING Q Why did the No SENSOR message appear even though my sensor was connected Please check if the sensor cable and the device cable are porperly and securely connected Make sure that the arrows on the cable heads align with each other and then insert the plug into the receptacle until you hear a click Also the connection must be made before the power is switched on oth
10. 4 STOP TIMER 10s IDLE LINE WIDTH BEST LAP FREEZE TIME GO TO DRIVE MODE EXIT TO TIMER Press SELEGT to choose the length of time the Timer is to be idle for before GMOS stops the Timer and log recording You can choose a value among 0 10 20 30 180 and 240 e You can stop the Timer any time by pressing either of the keys If you press MENU GMOS will stop the Timer AND enter Laptimer Menu Press SELECT to set the Finish Line at 60M or 100M long Press SELECT to designate what is to be used as Main Display between Lap Time and Session Time Press SELECT to designate what is to be used as Sub Display among Best Lap with time gap time gap displayed after a lap is complete Last Lap and Sec tor Time if there are Sector Lines available Press SELECT to choose a time length the Main Dis play and Sub Display are to be held when a record is updated You can select a value among 10 20 30 45 60 and 90 Press SELECT to go to Drive Mode The system will ask you SURE Press SELECT to confirm Other wise press MENU to cancel Press SELECT to exit Laptimer Menu and go back to Timer Using GMOS 25 Connecting GMOS to a Computer Before connectinig GMOS to a computer for the first time please go to www speed angle com download and 1 go to the SpeedAngle R4 section to download the latest version of SpeedAngle R4 zip and then 2 90 to the USB Driver section to download FTDI USB driver E
11. B 2 0 compatible Battery Life Time 14 hrs with backlit off Logs 254 logs max Max Log Time about 7 hrs Log Resolution 20 pps for lean angle and G 10 pps for GPS and speed Lap Timer Resolution 1 1000 second GPS Antenna built in GPS Update Rate 10 Hz GPS Sensitivity 167 dBm tracking GPS Channels 72 all in view GPS Cold Start Time 26 sec average GPS Speed 255 MPH 410 KMH max Longitudinal G Range 1 5 G Lean Angle Range R L 69 CE FG Features and specifications subject to change without notice Please visit www SpeedAngle com for the latest update Copyright 2015 SpeedAngle Inc All rights reserved Specification 32 MN SPECIFICATION Dashboard Dimension 2 4 4 4 0 8 61 5 mm 111 5 mm 20 mm Dashboard Weight 4 8 oz 1359 Sensor Dimension 0 7 0 3 0 15 17 mm 7 mm 3 6 mm Sensor Weight 0 7 oz 209 Power 3 7V Li lon battery Working Temp Range 36 F 140 F 2 C 60 C guaranteed LCD 132 64 STN display screen Refresh Rate 20 Hz Interface USB 2 0 compatible Battery Life Time 14 hrs without backlit and external GPS Antenna Logs 254 logs max Max Log Time about 7 hrs Log Resolution 20 pps for lean angle and G 10 pps for GPS and speed Lap Timer Resolution 1 1000 second GPS Antenna built in and external GPS Update Rate 10 Hz GPS Sensitivity 159 dBm tracking GPS Channels 32 all in view GPS Start Time 36 sec average G
12. CONNECT THE DASHBOARD AND OR SENSOR WITH ANY DEVICE OTHER THAN COMPUTERS OTHERWISE THEY MIGHT BE HARMED E M INSTALLING GMOS The installation of the GMOS dashboard unit and sensor unit is easy No drilling or wiring is required After the installation please remember to align the sensor as instructed and then you are ready to go Installing Dashboard Unit Location Please install the dashboard at the front beyond the steering stem area and keep it clearly visible to the sky Best Might be obstructed from the sky Installation To install the dashboard please install the bracket first You can either use the supplied 3M Dual Lock tape and adhere the bracket to a place you like or buy an AMPS hole pattern mount from the market and bolt the bracket to the mount With 3M Dual Lock Tape To use clean the mounting surface and the back of the brack et with alcohol and wipe dry Keep the SA logo rightside up Apply the joined pieces to the back of the bracket and press the bracket to the mounting surface Let sit for at least 24 hours after the application to obtain the best bonding strength Bracket Back With AMPS pattern Mount If you are using an AMPS hole pattern mount many mounts available in the market fit in this category please find the diagonal holes on the bracket and fit them with Installing GMOS 5 the corresponding holes on the mount plate Then bolt them together With a Hand made Moun
13. GMOS JMOOS JI100 SERIES USER MANUAL Version 0827 2015 for Firmware 65 and above _ 74 SpeedAngle Inc EPEE PCIE www SpeedAngle com IMPORTANT PLEASE READ SpeedAngle Lap Timer is a device with high technology and powerful algorithm It is capable of calculating and producing lean angle measurement real time and then listing the results in the Angle History and the Max Angle fields However there are times when the real time lean angle measurement might be exaggerated such as when e You are maneuvering your bike in a way that is outside normal sportsbike motion such as moving the bike backwards having a highside lowside or pulling a wheelie etc e You are curving around a bend by turning your handle bar at a great angle especially at a low speed e The wheel hits an obstacle or a pothole and causes the bike to bounce e You are curving around a bend whose slope changes midway e The vibration is too much More often than not this is because the G force behavior is not one of normal bike movement or the long axis of the motorcycle body does not point to the traveling direc tion ahead due to twist The GMOS Core is constantly examining if such interaction exists every time a turn is completed If the answer is yes it will compensate the interac tion and re produce measurement results after the calibration As the records of the Angle History and Max Angle fields are updated after the calibration process while
14. Hand made Mount vernrnunnnnnnnnnnnennnnnnvnenenavnnnenenavnnnenennnnnnener 6 Installing Sensor REE EE T LOCION Le T Installation Orientation rrarnrvnnnnvnnnnvnennvnvnevnvnevnvnennvnenavnnuevnnuenannennnneuuenee 8 Signs That the Installation Is Not Correct rrrrrrrarrnrrnarenernanerannnnennnnnne 8 Installation Checklist oo cece ccc ese ec eseeeeseeeeeeseeseeeeeesaueesaeeueevaeegeaeenness 9 Connecting Sensor to Dashboard rrurerunenunnrnnnrannnannnannnennnannnernnnenneenen 9 USING GMOS Lu 10 TNS eee dee oe atercce teeta E eyspeegneeeee one eaipsuaieeensventane 10 Getting Started osecseccocue cs tcendceneaiceusasseseteanteiceusacssendaceburenuanievstcontesseusanseanieacteas 10 DANE TONG nese 11 Icons and Their Functions rvuvnnnnnnvnnnennvnvnennnnvnnnnnenavnenenevnnnenenavnenenennnn 11 GPS Antenna ICON ou cec eee eceeeeceseeeeeeeeeseeeeeueeueeuaueueaueeeeueesauans 11 PRG ICOM ceasenananciesecaceasacenaramsqcacsasceenssndasecaceosacenassaevecasanc lt eamppeveraneros 11 Temperature Alert arrarranrnnrnnrnarnanvanvnnnnnnnannannnnnnnnnnnnnnnannansnsnneenn 12 PN 12 Current Time rrrnunnnnnnnnnnnnnnnnnnvnnnnnnnnnnnvnennvnenevnnnevnnnnnnnnnnavnennnuenennene 12 SS P nederste 12 Lean Angle History EEE et Geteceeecesnowetns 13 Max Right Left Angle sverdene 13 Lean Angle Meter Lnnnsneenaenepeeeeeresaesde 13 Message Area rrnarnannnarnnnrnannnernannnernanennnnnnennnnnnnnunnnannannnernennneennennn 13
15. PS Speed 255 MPH 410 KMH max Longitudinal G Range 1 5 G Lean Angle Range R L 69 C FE Features and specifications subject to change without notice Please visit www SpeedAngle com for the latest update Copyright 2014 SpeedAngle Inc All rights reserved Specification 33
16. Top Speed Le 14 Current SDECU EE EEE 14 Current Lean Angle ccccccceccceecceeeceeeceeeceeeccecueseueeeuesauesaeeeaees 14 System EN se erdensdee 14 METER D 16 HON soscasnacecestpectocsxsqansencaiedanectsndeeesracatiansadeescestercmsaieueaieeeremtes 16 Auto FE Grene 16 Knowing the Buttons edecede lt cteccstcuseececiemuanenstccnnedaceiiadeaseseeaccecepianeataccednce tect 17 GPS Positioning and Auto Search rrarennnrnnnrranevnnrnnnenanennnnranenannnannneen 17 FN TER EPO morei EE 17 If There Are Tracks Found arenannanenanrnnrnannnnrnannnnrnannnnrnannnnenaneneenuneneennsen 18 selecting A Track To Use Manually rrrnnrnnnonanenanerannnanerarnnannnnnnnnrnnnennn 19 Activatng Auto Set Track 15 Manually rrarrnnrnnnrrnnrnnnrnnnrnanernnrrnnennnennre 19 Starting Timer and Data Logging vassere 19 Stopping Timer and Data Logging cccccccecccececeeceeeeeeeseeeseeeseeesaeens 20 Viewing Your Lap Time Report rrrurnnrnannnnnnnrnarnannnrnnnnnernennannnennnnnnenene 20 Advanced Setting a Better Finish Line with Auto Set rrrrrnrerarennennre 21 How A Finish Line Is Set with Auto Set rrrrrarerarennrrranrvannnnnnnnnn 21 How to Control Your Finish Line Location r rrrrarennnnnanerannnnnnnnnn 21 Stay Close to the Center Line rrrranrnnnnnnnnnnnnnnnnnernnnrnnnrnnnrnnnnnen 22 Adjust Line Width Beforehand If Necessary rrarrnnrrrarerarnnnnnnnnn 22 PH TA savatesnsatraoncescacaies
17. angle data will be collected As a reminder a NO SENSOR message will appear where the G force bar is If later you would like to reconnect the sensor remember to turn the power off before the connection WARNING For your safety please check and make sure the device sensor antenna and cables are all properly secured Installing GMOS 9 USING GMOS Charging GMOS For safety purposes the battery that comes with your GMOS has just enough charge to sustain a working voltage Please charge the battery before starting using your GMOS To charge the battery please use the supplied USB cable to connect your GMOS with a computer an external battery pack charger or an AC USB converter plug and then insert the plug to a wall outlet Once the charging starts you will see a red light blink on on the top right corner Please make sure both the power and the backlight are off during charging other wise the battery will never be full The red light will go off once the the charging is complete Normally this will take about 2 5 hours If you are going to put GMOS away for a couple of months or more DO NOT store it on an empty battery Keep it in an environment near 20 C 68 F Otherwise the battery life might be reduced severely Getting Started When GMOS is powered on you will see the Welcome Screen appear displaying your User ID can be edited via SpeedAngle G MOS R4 GMOS model and its registration n
18. device in its original or equally protective package with a copy of the original packing slip or the PayPal invoice e Please print and cut out the issued shipping label and adhere it to the top of the package A package without the issued shipping label or with an expired shipping label will be refused e Please send the GMOS device insured and postage prepaid or accept the risk of package loss or damage during shipment e The repaired or replaced GMOS device will be shipped back to you Please con tact your local customs office for information as to taxes duties or other broker age fees that may be applied to returned goods Once our service center receives your GMOS device we will either repair or replace the GMOS device at our option The removed or replaced parts or device are prop erty of SpeedAngle Inc Please remember to download the logs recorded on your GMOS device before you ship it to our service center It is very likely that the logs will be damaged or lost dur ing warranty service SpeedAngle will not be responsible for such damage or loss Warranty 31 MN SPECIFICATION Dashboard Dimension 2 4 4 4 0 8 61 5 mm 111 5 mm 20 mm Dashboard Weight 4 8 oz 1359 Sensor Dimension 0 7 0 3 0 15 17 mm 7 mm 3 6 mm Sensor Weight 0 7 oz 209 Power 3 7V Li lon battery Working Temp Range 36 F 140 F 2 C 60 C guaranteed LCD 132 64 STN display screen Refresh Rate 20 Hz Interface US
19. e value Pressing MENU will go to the next item Below we will show you how to configure the settings Using GMOS 23 Log Count Memory Left LAPTIMER MENU VIEW LATEST RECORD Press SELEGT to enter the list of your latest 14 logs They are listed in the order recorded with their date time and track setting mr e To view a log move to the entry ma and press SELECT You will see 7308 OT maps a summary of session duration 2 23 302 best lap and average lap infor 47 17 mation e Press SELECT on DETAIL to see the time top speed and 2 33 933 164 124 average speed of every lap in 2 34 859 161 124 G LAPTIMER 12L 75 LEFT ZA 0725 1330 LOSAIL za 2230 3 08 311 123 82 2 56 972 156 107 2 33 311 165 125 A 2 32 502 166 125 this log PG UP EXIT e To exit press MENU to move to EXIT and press SELECT to confirm SET FL AT TRACK15 OFF Press SELECT to activate Auto Set at Track 15 This track will be named by the date and time it was set MM DD YY hh mm such as 12 20 15 10 30 TRK 01 SACUIT FULL Press SELECT to rotate among the 15 Tracks avail able and designate one to use later START TIMER Press SELECT to choose a speed at which GMOS is to set a Finish Line start the Timer and start log recording You can choose a value between 10 and 240 by an increment of 30 For how to choose a proper starting speed please refer to Advanced Setting a Better Finish Line with Auto Set P 21 Using GMOS 2
20. ely Also make sure the power is on Q cleared the logs by accident Can I retrieve them We are sorry but once the logs are cleared they can not be retrieved Please remember to download the logs to your PC when you finish the ride Troubleshooting 30 EI WARRANTY Your GMOS comes with a limited one year warranty with your purchase Speed Angle Inc warrants the GMOS device against defects in materials and workmanship under ordinary use for one year from the invoice date This limited warranty does not cover damage due to external cause including but not limited to accident abuse misuse improper installation improper connections with devices or components other than specified and unauthorized repair or alternation To request warranty service please contact your local dealer If you purchased GMOS directly from www speedangle com please email custserv speedangle com In the email please include a problem description and your GMOS registra tion number Your GMOS registration number is a combination of 1 letter followed by 7 digits It can be found at the back of your GMOS dashboard unit and on the Welcome Screen A Return Merchandise Authorization Number RMA and a war ranty service shipping label will be issued if the request is approved The RMA and shipping label are valid for 30 days from their issue date To ship the GMOS device back for warranty service please follow the instructions below e Please ship the GMOS
21. erwise the sensor will not be recognized by the device Q How come the lean angle meter needle was not moving during the ride Please make sure the sensor is connected Check if the arrows are pointing to the front of the bike It must be parallel to the longitudinal center line of the mo torcycle body and vertical to the ground Q The lean angle measured was smaller or larger than the actual angle Please check to see if the sensor is installed with the correct orientation See above Make sure the installation location does not move turn swing wag or vibrate too much For more information please see the Installing Sensor section Make sure you are using the red sponge tape included in the box to install the sensor Do not use the Dual Lock tape It will create extra vibration Please also make sure that the environmental temperature is within 36 F 140 F 2 C 60 C Using GMOS outside its operating temperature range might affect measurement accuracy Q Why was the lean angle history not updated after finished a turn There are two possibilities The first is that your speed of the turn did not exceed your Angle Threshold As a result the angle was ignored and was not recorded To adjust the Angle Threshold setting please go to System Menu The other is that the vibration when you were leaning was too much As a result the angle was categorized as invalid by GMOS Noise Filter If the vibration was not caused by road shoc
22. he better the reception and thus the higher the positioning accuracy e If there are less than 4 satellites locked the GPS Antenna Icon will not be displayed This will not interrupt ongoing log recording However if this hap pens when you are pressing SELECT to start a new log the system will not start recording Instead a POSITIONING message will appear for about 2 seconds in the Message Area The GPS Antenna Icon will reappear when the positioning process is completed Then you can press SELECT again to start recording a new log 2 REC Icon flashes when GMOS is recording The icon will flash faster when there is about 50 minutes of memory left at double speed when there is about 10 min utes left and stays visible when the memory is full Using GMOS 11 e The max log time is 7 hours or 254 logs e fthe REC Icon does not appear after you press SELECT to start recording this means the system can not record logs A message will be displayed in the Message Area indicating the reason the GPS module is still position ing the memory is full or the number of logs has reached 254 Please refer to 10 Message Area p 14 for more information e Entering System Menu will not interrupt recording unless you go on to en ter Timer Mode e To clear the logs you can either download and clear them with the Speed Angle R4 software or go to System Menu and select CLEAR MEMORY to clear them directly Temperature Alert flashes
23. he last three turns e Real time longitudinal G of acceleration deceleration up to 1 5G e Real time GPS speed up to 255 MPH 410 KMH e Top GPS speed e 10Hz GPS trace mapping e PC analysis Lap Timer e 1 1000 second lap time resolution e Lap time e Best lap whole screen reversed in color with time gap e Last lap e Session time e Sector time e Auto Track search e Auto Finish Line setup e Auto Timer start e Auto Timer stop e Auto data logging e Auto Lap Record Display e Up to 7 Sector Lines in one Track uploaded via software SpeedAngle R4 e Up to 15 Tracks e Track editable via software e Lap time record report with motion data e Google 3D replay with SAtoKML converter All the data can be recorded in the built in memory for up to 7 hours or 254 logs whichever is reached first After your ride connect the GMOS dashboard unit to your PC to have the logged data downloaded Our user friendly software SpeedAngle R4 makes it easy to relive your rides on the computer with the lean angle G and track sectors mapped onto your GPS traces Open the graph plot in lean angle G force or speed or open your lap time report to have your ride further analyzed You can load one log at a time or load up to 6 logs and have them replayed simultaneously to have a virtual race This allows you to have a deeper insight into your riding style GMOS Overview 2 and skill find your braking points and best line or even compare your
24. ing The Timer and data logging will stop automatically and simultaneously when the speed has stayed at O for a pre designated period of time You can control when the data logging is to end by setting a proper idle time Here are a few suggestions Timer stop condition Suggested Idle Time Shortly after you stop riding 10 sec Stay running even during your wait on the grid 180 or 240 sec Please note that if your idle time is set at above 30 when you have been idle for more than 30 seconds after start riding such as when you are waiting on the grid after warmup lap the lap count will resume back to 1 e To set the idle time please press MENU to enter Laptimer Menu e You can press any of the keys to stop the Timer and data logging manually If you press MENU GMOS will stop the timer AND enter Laptimer Menu Viewing Your Lap Time Report Once the Timer stops a summary of your latest session will be Ne 28 09 9 automatically displayed listing its date time track setting dura BEST 1007 tion best and average lap time top speed and average speed are Using GMOS 20 To see the time top speed and average speed of each lap press SELECT to enter DETAIL To exit DETAIL either press MENU to go to EXIT and press SELECT to confirm or do nothing Once you reach the starting speed again GMOS will automati cally exit and start the Timer e If there were less than 3 full laps created there will be no summary available You wi
25. k please check if the sensor was installed securely and if the installation location swings or moves If necessary install the sensor to a location with less vibration Troubleshooting 28 Why did the GPS speed read 0 when I was riding This happens when the GPS signal reception is poor and there are not enough satellites available to provide sufficient GPS positioning data The GMOS GPS Core will continue searching for more satellites and will resume its function once the GPS signal reception improves Why was the GPS Antenna Icon not displayed When the GPS reception is poor it might take longer for the GPS Core to find enough satellites for GPS positioning The GPS Antenna Icon will reappear once the positioning is complete My GMOS can not record logs The reason might be that the GPS Core was positioning that the memory was full or that the number of logs recorded had reached 254 Please refer to page 13 for more information Why was the G force bar not back at zero when I was riding at a constant speed Please check to see if the sensor is installed vertical to the ground securely A tilted sensor might affect G force and lean angle measurement If it stayed maxed out the indicator inside the G sensor was stuck Please give the sensor a few light taps and it will be back to zero Why was there no lap time produced when I passed through a Finish Line This might be that the GPS reception is not good enough when the
26. ll see NOT ENOUGH DATA instead e If no Finish Line was crossed at all There will be no report available GMOS will go back to Standby Screen directly e To view the reports of up to the previous 14 logs please enter LapTimer Menu and go to VIEW LATEST RECORDS 2 ot 3 08 311 123 82 1 2 2 56 972 156 107 3 2 33 933 164 124 4 2 34 107 162 124 5 2 34 859 161 124 6 2 33 311 165 125 7 2 32 502 166 125 PG UP EXIT 4774 1124 2028 LOSAIL 2 43 0 NOT ENOUGH DATA FOR BEST LAP AND AVERAGE LAP Advanced Setting a Better Finish Line with Auto Set How A Finish Line Is Set with Auto Set When GMOS is setting a new Track with Auto Set it marks the location where the staring speed is reached 50 M as a reference point uses the following 10 meter trace as a direction pointer and draws a line extending 50M 2 from the reference point to both sides perpendicular to your trace This is your Finish Line Then GMOS also marks your riding direction as the valid crossing direc tion of this Line This is to prevent unwanted Lap times when the Line is crossed from a wrong direction Then GMOS will go on to start the Timer How to Control Your Finish Line Location Track Border 10 M F 10M gt Finish Line As the location where the Finish Line is set depends on where the starting speed is reached you can control the location of the Finish Line by designating a proper starting speed Here are a few
27. ncanaciacessaaeeseriatentsusqaneeseaiebinensndeeussieateannes 22 Configuring the Timer seres 23 Connecting GMOS to a Computer rrrarrranrnnrnnannnnrnnnrnnnnnnnrnnnrnnnrnanennnnnnnennn 26 TROUBLE SHOOTING LP 28 WARRANTY Leren 31 SFEGIFIGAHON erae E EEE vents 32 fk GMOS OVERVIEW What Is in the Package Thank you for purchasing GMOS JI100S Your box contains the following items 1 Dashboard unit and Bracket 2 Sensor unit 3 GMOS JI100S Quick Manual 4 USB Cable 5 SpeedAngle Logo Stickers 6 Adhesive Tapes SA SPEEBNAFNGLEB SY7 SPEEDANGLE 7 Hex Key Wrench 8 Bolts and Nuts SEES lf any of these items is missing from your box please contact your local dealer lf you purchased your GMOS directly from www speedangle com please email custserv speedangle com with your registration number The registration number can be found at the back of your GMOS dashboard unit or on the Welcome Screen Introduction and Functions GMOS JI100S is a state of the art data logger developed for motorcycle enthusi asts It is capable of recording not only your track performance but also the motion and trace of your ride Equipped with cutting edge 10Hz GPS module and aero GMOS Overview 1 technology plus our processing algorithm optimized for motorcycles GMOS JI100 series features Motion and Trace e Real time lean angle up to 69 degrees e Max degree of left right lean angles e Max angles of t
28. number of logs recorded has reached 254 Please Siu I download your logs and then clear the memory to release the memory space 11 Top Speed shows the top speed measured since GMOS is powered on e To clear the record go to System Menu and select RESET TOP ANG AND 37 SPD 12 Current Speed shows the current GPS speed up to 255 MPH 410 KMH e To switch the measuring system from MPH to KMH or vice versa please go to System Menu and select UNIT MPH KMH 13 Current Lean Angle shows real time lean angle degree reading up to 69 System Menu In System Menu you can e clear the max lean angles and top speed recorded since GMOS is powered on e clear the logs in the memory e turn an additional satellite system GLONASS on e set sensor vibration filter strength e set the built in GPS clock to your local Time Zone e change the measuring unit Using GMOS 14 e change screen brightness and e enter Lap Timer Mode To enter System Menu press MENU while you are in Drive mode As a rule in system Menu pressing SELECT will execute the function or adjust the value of the menu item Pressing MENU will go to the next item SYSTEM JAN 01 11 12LOGS 85 MEM LEFT RESET TOP ANG AND SPD CLEAR MEMORY VIBRATION FILTER MID UNIT MPH KMH TIMEZONE GMT LCD BRIGHTNESS LANGUAGE GO TO TIMER MODE SAVE SETTINGS AND EXIT SYSTEM MENU Press SELECT to clear top speed and angles Press SELECT t
29. o clear the memory A SURE mes sage will be prompted Press SELECT again to con firm or press MENU to cancel Once the memory is cleared the number of logs dis played at the top of the menu will be down to 0 and the memory left be back to 100 Press SELECT to turn on the GLONASS satellite sys tem in addition to the original GPS system Press SELECT to set the sensor vibration filter For high vibration riding conditions riding style and bike settings combined set it HIGH For very smooth rid ing conditions set it LOW Otherwise use MID e A stronger filter may ignore quick lean movements as vibrations Press SELECT to set the speed unit as MPH or KMH Press SELECT to set your local time zone offset from GMT at a number between 12 and 12 Press SELECT to change the LCD brightness Press SELECT to set the Liability Screen language Press SELECT to go to Timer Mode The system will ask you SURE Press SELECT to confirm Other wise press MENU to cancel Press SELECT to save the settings and exit Menu Using GMOS 15 Timer Mode Introduction To enter Lap Timer Mode from Drive mode please enter System Menu press MENU to go to GO TO LAPTIMER MODE and press SELECT If you were in Timer Mode when you turned off GMOS last time the system remembers it and will enter Timer Mode directly after the Liability Screen The Timer Mode screen looks like vil WM Sub Display Displaying best lap wi
30. ride with oth ers for further improvement GMOS at a Glance Your GMOS comes with a dashboard unit and a sensor The dashboard unit re ceives GPS signals processes and stores the data transmitted from the sensor and communicates with the computer The sensor is responsible for sensing the lean angles of the motorcycle and transmits them to the dashboard Below are overviews of the dashboard unit and the sensor Dashboard pr LED blinks on when battery is charging a SPEEDANGLE Menu Button press to enter menu or in a menu to go to the next item Select Button press to start stop recording or in a menu to execute the function or adjust the value USB Port Backlight Switch Power Switc Sensor Connection Cable Bracket The holes marked at the ends of the red lines conform to AMPS hole pattern a pat tern adopted by many mount manufacturers diagonally Other holes form squares and equilateral triangles This makes it easy to ad just fitting angles if you are making your own mount The left claws are taller than the right claws to fit the dashboard profile Please make sure the SA logo is right side up before clicking the dashboard into place GMOS Overview 3 Sensor Sensor The sensor must be installed parallel to the bike body vertical to the ground with the arrows pointing to the front of your bike Sensor Connection Cable GMOS Overview 4 WARNING DO NOT
31. s displaying the record of your newly finished laps once the play Timer stops and back to Timer automatically once you reach the starting speed again Knowing the Buttons In Timer Mode and Laptimer Menu pressing the button will e MENU enter Laptimer Menu or go to the next item e SELECT adjust the value of the menu item or execute the function GPS Positioning and Auto Search Once you enter Timer Mode the system will check the GPS signal quality until more than 4 satellites are locked and then search for available tracks settings either by Auto Set or by Ge preloading whose reference point is within 3 KM 1 8 mile of AR your location e During this process you can press MENU to enter Laptimer Menu and edit set tings but this is not recommended unless you are familiar with the Menu e Auto Search will be executed only once To run Auto Search again please reboot GMOS and enter Timer Mode again If No Track Is Found If there are no Track settings available GMOS will prompt NO TRACK FOUND on the screen and wait for 90 seconds before entering Standby Screen You can either do nothing and let it enter automatically or press any of the keys to skip the wait Once in Standby Screen GMOS will prompt SET NEW TRACK 15 meaning it will automatically set a new Finish Line later and save it at Track 15 If track 15 has al ready been taken GMOS will prompt OVERWRITE TRACK 15 and overwrite it later U
32. sing GMOS 17 90 seconds later NO TRACK FOUND SET NEW TRACK 15 PRESS ANY KEY TO SET A NEW TRACK TIMER STARTS AT 90KMH OVERWRITE TRACK 15 TIMER STARTS AT 90KMH If There Are Tracks Found lf there are Track s found you will see them listed as the Search Result e If there is only one Track found GMOS will list it and wait 90 seconds Do noth ing or press SELECT to confirm and skip the wait GMOS will display this Track setting on Standby Screen preparing to use it to produce lap times later Yul wa 12 30 SEARCH RESULT SACUIT WEST SET A NEW TRACK SACUIT WEST TIMER STARTS AT 90KMH e If there are more than one Track found GMOS will list them and wait 90 seconds so that you have time to select one Press MENU to go to the Track you want and then press SELECT to confirm Then GMOS will enter Standby Mode Yul wa 12 30 PLEASE SELECT ONE SACUIT EAST SACUIT WEST 08_25_12 14 38 SET A NEW TRACK If none of them is selected in 90 seconds as GMOS will not be TZA 2 35 PLEASE SELECT ONE SACUIT EAST SACUIT WEST 08_25_12 14 38 SET A NEW TRACK SACUIT WEST TIMER STARTS AT 90KMH able to know which one to use it will automatically prepare to set a new Track at Track 15 or overwrite it if it has already been taken In either case if you don t want to use the track found and would like to set a new Track instead please press MENU to go to SET A NEW TRACK and
33. t If you would like to make your own mount plate no problem The hole pattern on the bracket is designed to form as many equilateral triangles and squares as possible to allow you the maximum freedom when adjusting fitting orientations Below are two examples After the bracket is installed insert the left end of the device into the bracket then click the right end into place Installing GMOS 6 Installing Sensor Location Find a plane on either side of the main frame near the footpeg that is parallel to the bike body longitudinal center line and vertical to the ground on the main frame near the footpeg Top View Rear View Parallel to the bike body center line Vertical to the ground If you would like to install it elsewhere follow the principles above and avoid places that may move swing wag turn or vibrate such as handle bar bike tail and fairing etc gt Handle Bar Tail Exhaust Pipe Fairing Suspension Installing GMOS 7 Installation Orientation Clean the mounting surface with alcohol and let dry Make sure the arrows are point ing to the front of the bike With the supplied red sponge tape adhere the sensor to the installation location Please also make sure the sensor cable Is secured Signs That the Installation Is Not Correct Consider changing the installation location if you see the lean angle meter needle moving erratically during a turn in Drive Mode or you see s
34. th time gap sector time last lap Lap Number Flashes when a Finish Line is crossed Main Display Displaying lap time session time Highlighted when a best lap is created if Sub Display best lap The upper half is the same as Drive mode displaying top speed current speed and longitudinal G Angles are not displayed The lower half consists of three compo nents Main Display Sub Display and Lap number Auto Features Youe SpeedAngle lap timer is basically hands free The best way to use it is turn on the power and then DO NOTHING unless you have multiple settings available for the track and need to choose one Focus on your ride It will take care of itself With convenience in mind the SpeedAngle lap timer auto features include Auto features What it does Auto Track Search searching for Track settings available within 3KM auto matically after GPS positioning is complete Auto Finish Line Setup drawing a Finish Line automatically where the Timer starting speed is reached when no track settings can be found or when being designated to This setting will be saved to Track 15 only Auto Timer Start starting the Timer automatically when the pre set starting speed is reached Using GMOS 16 Auto Timer Stop stopping the Timer automatically when it has been idle for a pre set length of time Auto Data Logging starting and stopping data logging automatically and syn chronically with Timer Auto Lap Report Di
35. uch lean angle graph pattern as the figure to the right in the analysis software SpeedAngle R4 The bike is leaning into a turn but the angle degree pl 0 05 0 10 0 15 0 20 0 25 0 30 0 35 0 measured is near 0 too much S ing vibration These peak like lean angle patterns are also a result of too much vibration If your angle shows a similar graph pattern in R4 as below the sensor is installed in a wrong direction Make sure the arrows on the sensor case is pointed to the front of the bike Installing GMOS 8 Installation Checklist After installation please use this checklist to help ensure the installation is correct o Is the sensor installed to a location that will not move swing wag or turn o Is the sensor installed to a location with least vibration o Is the sensor parallel to the longitudinal center line of the bike and vertical to the ground when the bike is upright o Are the arrows on the casing pointing to the front of the bike Connecting Sensor to Dashboard When connecting the sensor to the dashboard unit make sure the arrows on the cable heads align with each other Insert the plug into the receptacle until you hear a click Connect the sensor before you turn the device power on NOTE If the sensor is connected AFTER the power is on it will not be recognized by the device You can choose not to connect the sensor and use the dash board alone as a simple lap timer In this case no lean
36. umber for 5 seconds SPEEDANGLE RIDER You can press any key to skip the wait RN S1234567 WWW SPEEDANGLE COM Then GMOS will display the Liability Screen Please read it carefully Then GMOS will enter Drive mode or Timer Mode automatically depending on which Mode you were in when you ASSUME ALL Rte ANDO RESPONSIBILITY turned GMOS off last time Please note that data are not shared RELATED TO ITS USAGE between modes PLEASE CHOOSE SAFETY In Drive mode GMOS displays your speeds lean angles and G s and record these data plus GPS traces In Timer Mode GMOS displays the speeds G s and lap times and records these data plus lean angles and GPS traces Using GMOS 10 Drive Mode Drive Mode is suitable for open road cruising Start your ride after you enter Drive Mode GMOS will display the riding motion data collected real time including GPS speed top GPS speed acceleration deceleration G real time lean angle max left right lean angle and show the max angle history of the last three turns To record the data press SELECT The envelope shaped REC Icon will start flash ing and a START LOGGING message will be displayed To stop recording press SELECT again Below are a diagram and a table of the Drive Mode features Pa Din MG 28 43 45 OG O 9 icons and Their Functions 1 GPS Antenna Icon indicates the quality of GPS signal reception The more vertical lines the icon displays t
37. when the environmental temperature is below or above the operating temperature range of the sensor 36 F 140 F or 2 C 60 C flashes when the temperature is below 36 F 2 C while t flashes when the tempera ture is above 140 F 60 C e Environmental temperature below or above the sensor s operating tempera ture range might affect measurement accuracy Battery Icon indicates the charge of the battery e When the battery is almost empty a LOW BATTERY message will be prompted Please recharge GMOS as soon as possible LOW BATTERY PLEASE TURN OFF POWER TO PROTECT BATTERY Current Time indicates the current time of the preset Time Zone e To set the Time Zone please go to System Menu and select TIMEZONE 37 GMT G force Bar indicates the real time G A right going bar indicates acceleration while a left going bar deceleration e if the bar is not back at center when the bike is stationary the sensor is not vertical to the ground Please check the installation Using GMOS 12 7 Lean Angle History lists the max angles of the last three turns Updated every time a new turn is completed A right aligned number represents a right turn angle degree while a left aligned number a left turn angle degree e Lean angle degrees less than including 15 will not be displayed in Lean Angle History Max Right Left Angle shows the max right left lean angle degrees measured since GMOS is
Download Pdf Manuals
Related Search