1524 User`s Manual
Contents
1. a M p E Tube ef il a Tube c pacitylm 8 tube PCR strip 0 2 Radius mm 56 4 Max RPM 15 000 Max ROF g force 14 187 20 LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R 8 Product Range MIP 21 YR A Fr IN Refrigerated high speed micro centrifuge 1730R 9 CE Declaration Doc No STC A09 011 KELO9 C02109 EC Declaration of Conformity We Gyrozen Co Ltd B Station 544 1 Bongmyeong dong Yuseong gu Daejeon 305 301 Korea declare under our sole responsibility that the product Description of Equipment Centrifuge Model Name 1524 to which this declaration relates is in conformity with the following standards or other normative A EN 61010 1 for electrical equipment boratory use Part 1 General re Safety requirements for electrical measurement control and laboratory use Part 2 Particular requireme Electrical equipment for measurem EMC requirements industrial scientific and medical ISM disturbance characteristics Limits an measurement 2004 108 EC Directive the European Parliament and of t Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89 336 EEC 2006 95 EC Directive 2006 95 EC of the European Parliament and of the Council of 12 December 2006 on the harmonization of the laws of Member States relating to electrical equipment designed for u2. tightly assembled gt To disassemble the rotor Rotate the Rotor Locking Nut counterclockwise 10 LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R 4 After loading sample tubes close the rotor lid until hearing clank shut gt When you open the lid lift the nut 3 2 2 PCR Rotor 2 Mount a proper rotor into the motor shaft 3 Grasp the rotor with one hand and place Rotor Locking Tool at the center hole of the rotor gt To assemble the rotor Rotate the Rotor Locking Tool clockwise until tightly assembled gt To disassemble the rotor Rotate the Rotor Locking Tool counterclockwise 3 3 Positioning of Sample Tubes 1 Before loading sample tubes check the water drop or dirt in the rotor hole or inner adaptor gt If there is a water drop or dirt in the rotor hole or inner adaptor remove it with soft dry cloth 2 Tubes should be placed in the rotor with same amount of samples at symmetrical positions gt Only use appropriate centrifugal tubes and do not exceed the speed beyond the tube s max g force gt For safety fill the sample for 70 80 in the tubes Correct Way of Sample Balancing amp Tube Usage 9 000 xg 8 000xg 10 000 xg 1 000 xg Check the g force of sample containers 10 80 filling for safety Ke Tf the number of samples is not in pair please load the control tubes at each symmetrical position Otherwise it results noise and
3. back of A the instrument 2 Turn on the instrument by pressing a switch on the right side of the je instrument LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R 3 1 2 Door Release 1 For opening the door touch the DOOR button gt Should touch the DOOR button When the door is closed Door LED shows off gt Close the door until hearing clank shut gt When the door is opened the door LED turns on When the instrument was released the rotor was fixed in the chamber of instrument A There is a buffer to fix the rotor in the chamber Please remove the buffer before running the instrument v The door is not opened while the instrument is running v If the door is opened the instrument could not be operated even with pressing the Start button v Power Failure If there is any power failure during operation door is not opened with touching Door Door can be opened only when the operation is completely stopped and the power is on again If you want to open the door at the power failure please refer to 4 8 Emergency Door Open 3 2 Rotor Coupling and Disassembling Action 1 Before coupling a rotor clean the motor shaft and chamber with soft dry towel 3 2 1 Fixed Angle Rotor 2 Mount a proper rotor into the motor shaft 3 Place the Rotor Locking Nut at the center hole of the rotor gt To assemble the rotor Rotate the Rotor Locking Nut clockwise until
4. holding finger on the A W buttons for 5 seconds the unit of setting value is changed to 10 sec from 1sec gt If you do not touch the A W button for 5 second the setting mode is cleared 5 Touch the Enter button to complete the setting 4 4 Acceleration Deceleration Use the adjustment function of acceleration amp deceleration levels to protect sensitive samples Action 1 Touch ACC DEC button 2 Touch the AW buttons to change input ACC value ACC blinks on the ACC DEC display gt Input the desired level of ACC from 1 to 9 Level 9 The fastest acceleration gt If you do not touch the A W button for 5 second the setting mode is cleared 3 Fix the ACC level by touching Enter button 4 Touch the A W buttons to change input DEC value gt DEC blinks on the ACC DEC display gt Input the desired level of DEC from 0 to 9 Level 0 Natural deceleration Level 9 The fastest deceleration gt If you do not touch the AW button for 5 second the setting mode is cleared 5 Fix the DEC level by touching Enter button 14 LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R 4 5 Program Saving amp Recalling Action 4 5 1 Saving 1 Set parameters Refer to 4 2 4 4 2 Touch the PROG button longer than 3 seconds gt Check the message of PROGRAM SAVE on the display window 3 Touch the A W buttons to change i
5. not touch the A W button for 5 second the setting mode is cleared 3 Touch the Enter button to complete the setting gt Touch Enter to save the setting value 4 2 1 Setting RCF gt Speed setting unit 1 rcf or 10 rcf 1 Touch the RPM RCF button once gt RPM MODE is generated with touching a RPM RCF button once gt RPM LED is flickering at the display window 2 Touch the A W buttons to change input value gt After keeping holding finger on the Aw buttons for 5 seconds the unit of setting value is changed to 10 rcf from 1 rcf gt If you do not touch the A W button for 5 second the setting mode is cleared 3 Touch the Enter button to complete the setting 4 3 Setting Time gt Speed setting unit 1min or 10 min 1 sec or 10 sec Action v Time is down counted after starting centrifugation 1 Touch the TIME button once gt MIN on LED is flickering 2 Touch the A W buttons to change the minute value 13 LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R gt After keeping holding finger on the A W buttons for 5 seconds the unit of setting value is changed to 10 min from 1min gt If you do not touch the A W button for 5 second the setting mode is cleared 3 Touch the Enter button to pass the SEC value setting 4 Touch the A W buttons to change the second value gt After keeping
6. to provide proper power If the power input of Power supply V Hz is 10 more than reguired power this message is appeared Shut off the power supply and then check the voltage of the Power supply V H2 Use AVR to provide proper power If the instrument is spun with over speed there will be some problems in the overload of motor and the output of motor Shut off the power supply and then turn on the power switch again to check the instrument If the installed software has bugs this message is appeared 19 Tuning the firmware Download Check weight balances of samples Please refer to 3 3 Positioning of Error 8 Imbalance Sample Tubes and then turn off and on the instrument for checking Any wire disconnection or tuning of the instrument must be performed only by a service engineer who is authorized by GYROZEN Co Ltd 7 Rotors amp Accessories Fixed Angle Rotor GRE m2 0 24 24 x 1 5 2 0 m Ps 45 Hole diameter mm 11 1 Max height for tube fit mm 63 Tube i i 7 Tube capacity nd oz 05 wmo V Adaptor U U Non Cat Mo casmo22 SoS Adaptor bore Ox L mm 65x23 8x31 Radius mm 67 73 84 3 Max RPM 1500 Max ROF g force 16 854 18 363 21 206 PCR Rotor GRF s0 2 32 4 x 8 tube PCR strips 32 x 0 2 md Ps 45 Hole diameter mm 6 5 Max height for tube fit mm 16 PCHOHOKCHOHOM p
7. vibration which eventually damages the instrument Ke For safety the Imbalance Cut Off function will be occurred if there is imbalance of loading tubes Error 8 Imbalance error Please refer to 6 Trouble Shooting 11 LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R 4 Operation 4 1 Key Functions of Control Panel RPM RCF For automatic conversion of RPM RCF and to set the speed TIME Use to set time available range up to 99 min 59 sec 00 00 continuous ACC DEC Use to set the acceleration amp deceleration level from 1 to 9 steps 0 in deceleration step means natural deceleration Larger number means faster acceleration or deceleration PROG Use to save a set of setting values or recall the saved program number Pulse Use for quick runs Enter Use for completion of data setting Start Stop Use to start and stop operation Door Use to open instrument lid 4 2 Setting RPM RCF Action 4 2 1 Setting RPM p Speed setting unit 10rpm or 100rpm 1 Touch the RPM RCF button once gt RPM MODE is generated with touching a RPM RCF button once 12 LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R gt RPM LED is flickering at the display window 2 Touch the A W buttons to change input value gt After 5 seconds from touching the A W buttons the unit of setting value is changed to 100 rpm from 10rpm gt Ifyou do
8. ENIENCE IN OPERATION m Intuitive touch button with easy to follow controls u Easy fo read LCD display with bright white lettering on a blue LCD background u Time control of pulse timed and continuous O g PN i 15880 99 50 4 gt va Automatic RPM RCF conversion for prompt detection of g force m Easy fo check actual rpm through the top window of door 88868 See Program memory for up to 100 programs m Automatic door opening function when rotor is static for easy retrieval of samples ECO FRIENDLY MANUFACTURING m Dust free AC induction motor Eco safe refrigerant R404a m Very quiet operation at lesser than 60 EASY CUSTOMIZATION m Any rotors sample containers and adaptors can be manufactured according to customer s specification u Flexibility of including any additional functions or programs in need Liy ROUEN Refrigerated high speed micro centrifuge 1730R 1 1 1 2 Za 2 2 gt 3 2 3 3 4 1 4 2 4 3 4 4 4 5 4 6 4 7 4 8 4 9 5 1 5 2 5 3 5 4 LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R CONTENTS Page Meanings of Symbols amp Safety Precautions nA 6 MEZN Or VGO a E EE 6 Safety Precautions u cccccecssssssessessssssesssessecssessesssesscssessecssesssssessssssessucssessucssessscssessucsuessucsusssucsusssucsuessscasecsucssecsucesecsecasecsecesecseeeseesees 6 Product Description and Technical Specifications cceeccccesssesssss
9. High Speed Microcentrifuge 1524 User s Manual D A P NA es vw e o RPM a a IG Ente DEC Pros START STOP Gyrozen Co Ltd B Station 30 12 Gyeryong ro 141 gil Yuseoung gu Daejeon 305 301 Korea Tel 82 42 719 8200 Fax 82 42 826 9848 WWwwW gyrozen com DOC No CO5DC00204 11 toy RUZEN Designed to suit your exact needs Wide range of modern centrifuges for a wide variety of laboratory applications THE BEST FUNCTIONAL QUALITY Manufactured and tested to IEC standards stable spinning operation within 2 variation s Low noise level with unique airflow damping and elemination to sample Steady and soft deceleration with dynamic brake technology SAFETY and ROBUSTNESS Strong steel layered door with auto lock function m Safety door lock mechanism ensures the door is locked whilst in operation mode m Unique door drop protection protects the operator and samples when loading and unloading Automatic recognition and alarms for imbalance over speed and over heat Automatic door open scheme with safety level of aperture depth not to damage operators m Emergency door lock release helps to open the instrument when power blackout or sudden stoppage occurs m Autoclavable and corrosion resistant rotors ensure safety and long life m High quality cabinets with scratch resistant powder coated finish LIYFRLIZTENN Refrigerated high speed micro centrifuge 1730R CONV
10. corrosion on the surface of the instrument v Tf any rust appears clean it with neutral detergents and keep dry 5 2 Chamber 1 Keep dry inside the chamber after every use 2 If the chamber is contaminated dip the cloth in neutral detergent and clean contaminated area 5 3 Shaft 1 Always make special attention to clean the motor shaft to avoid any imbalance problem due to the contaminants 2 After using the instrument take out the rotor from the shaft and clean the shaft with dry soft cloth to keep dry 5 4 Rotor 1 If any parts are contaminated with samples clean the rotor with soft wet cloth and keep the rotor dry 2 Be careful not to make scratches inside or on the surface of rotors Any small scratches can cause corrosion of the rotor and big damage to the instrument 3 If you do not use the instrument keep the rotor separately from the motor shaft and stand it upside down LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R 17 5 5 Transportation of Instrument 1 If you need to move or ship the instrument be cautious to protect the motor shaft from any physical impact or turbulence 2 Do not mount a rotor in any cases of movement Fill inside the chamber with proper materials to keep the motor shaft on place and not to be influenced by physical pressure 6 Trouble Shooting 6 1 Check list Connect the AC Power cord and make sure that the line is completely connected Power fa
11. de with beeping sound press STOP button to stop the beeping sound and press Enter button to release of the error status and make the instrument go to the default setting again Error Error 1 or Error 9 Error 2 Error 3 Error 4 Error5 Error 6 Error 7 LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R Possible Causes RPM Sensor Door Motor Overheating Low Voltage High Voltage Over Speed Software Actions Shut off the power supply and then turn on the power switch again to check the instrument If the error code shows continuously although you try to operate again please call Gyrozen Field Service Engineer If the door is not closed completely this message is appeared Remove the dirt at the door latch and then close the door completely again Check the Door LED on the display window If it is not solved in shortly open the door with emergency door tool manually for safety of sample Please refer to 4 8 Emergency Door Open If the motor is overheated this message is appeared Shut off the power supply for an hour and then turn on the power switch for checking the instrument If the error code shows continuously please call Gyrozen Field Service Engineer If the power input of Power supply V Hz is 10 less than required power this message is appeared Shut off the power supply and then check the voltage of the Power supply V Hz Use AVR
12. ecommended by IEC 61010 2 020 Use the emergency door open function only when the door button on the control panel is dumb under the condition of complete stop of rotor running LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R Never try to open or move the instrument if it is not completely stopped If the power input is more than 10 of the recommended voltage or fluctuates frequently it may cause malfunction of the instrument and often result serious damage Install the instrument at the place without any kinds of corrosive gases 2 Product Description amp Technical Specifications 2 1 Product Description Power Socket A 8 Door p P t dno l A G Open Hole Y tt N s TT Emergency Door s ate i Power Switch Control Panel Accessory o Emergency Open Tool User manual AC Power Cord Rotor Locking Tool gt Cat No GZ 1524 Microcentrifuges includes Fixed Angle rotor GRF m2 0 24 with plastic lid and 12 of 0 2ml amp 0 5ml adaptors gt The PCR tube rotor GRF s0 2 32 is optional LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R 2 2 Technical Specifications Noise level dB lt 60 Power supply V Hz 220 50 60 110V optional Power requirement VA 440 3 Installation 3 1 Power On Off and Door Release 3 1 1 Power On Off 1 Connect the AC Power cord at the power socket on the right
13. erformed only when spinning is completely stopped 10 Should not exceed the rated speed or specific gravity Samples whose density is greater than 1 2g ml must have reduced maximum rotational speed to avoid rotor failure 11 The sample content should not exceed 80 of total capacity of a tube Otherwise it would cause spillage of sample fluid and even the tube breakage 12 ALWAYS load the tubes symmetrically with evenly weighted samples to avoid rotor imbalance If necessary use the water blank to counterbalance the unpaired sample 13 The operation speed should not exceed the highest value of the individual guaranteed g forces of each centrifuge rotor bucket or adaptors and sample container especially the guaranteed g force of sample container should not be neglected 14 The rotors should be cleaned and kept dry after every use for longer life and safety 15 ALWAYS disconnect the power supply prior to maintenance care and service to avoid electrical shock 16 ALWAYS use proven disinfection procedures after centrifuging biohazardous materials 17 Should not centrifuge flammable toxic radioactive explosive or corrosive materials 18 When it is necessary to use toxic or radioactive materials or pathogenic micro organisms which belong to the Risk Group II of WHO Laboratory Bio safety Manual should follow national regulations Do not place dangerous materials within 30 cm distance around the instrument and that is also r
14. ilure between the instrument and power outlet Check the power switch is turned on Please refer to 3 1 Power On Off and Door Release If the door is not closed completely the instrument can t run Can t be started l Check the Door LED on the display window and close the door completely If the power is out check the main fuse for the laboratory to supply the power If Can t open the door it is not solved in shortly open the door with Emergency Door Open Tool manually for safety of sample Please refer to 4 8 Emergency Door Open Remove the dirt at the door latch and then close the door completely again If Can t close the door the door seems not being closed by mechanical reason please contact our service team Please check the balanced status of both the table and the instrument Please re check the coupling status of the following three matches to minimize the noise 1 the balanced way of coupling of the rotor into the motor shaft Noi a oise a a vibration 2 the completeness of fixing of the Rotor Locking Nut on the rotor during running 3 the matching status of Rotor Lid with the rotor Please refer to 3 2 Rotor Coupling and Disassembling Check balances of samples in the rotor Please refer to 3 3 Positioning of Sample of Tubes and load the same weight of samples symmetrically 18 LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R 6 2 Error Code If the instrument shows the error co
15. nput Program number gt If you do not touch the A W button for 5 second the setting mode is cleared gt Save up to 100 programs Program numbers from 00 to 99 4 Touch the Enter button to complete the saving 4 5 2 Recalling 1 To recall the saved program just touch the PROG button shortly less than 1 sec gt Check the message of PROGRAM CALL at the display window 2 Touch the A W buttons to select program number you want to recall and then touch the Enter button gt If you do not touch the A W button for 5 second the setting mode is cleared gt When you touch the Enter button display window shows the saved setting parameters RPM RCF TIME TEMP 4 6 Pulse p It is for quick and short spin down Action 1 If you touch Pulse button and release at the point you want to stop the centrifuge decelerates immediately 15 LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R 4 7 Start Stop Action 4 7 1 Start 1 After setting RPM RCF Time and Temp touch Start button gt During running a Start LED is turned on gt The instrument is running only when the door is closed 4 7 1 Stop 1 In case of touching the Stop button the operation is stopped 4 8 Emergency Door Open For emergency door open you can use the Emergency Door Open Tool only when the instrument is completely st
16. nsportation of the TAS RU V Tee a 19 6 Trouble Shooting mmmesrssssnssesvsssssssesesesrssesserseeserseesrssesseeserssessrssesseessesserserserserssessessersessensenn 19 6 1 ENN NO O V O OV OPR OR O PRO RVP VVN 19 6 2 EEG 210 M O O O O O O O O O O OV 20 7 Rotors amp Accessories 20 8 Product Range acccssesssssssssessessesssessecsessessscsuccuccsecsscsussussuscuscsscsussussuceusesscsucsussuseuceuscsucsussussusceuscasssscsucsucaucessecscsucsuceucesecseesecsucauceuceueeseeaseaseens 21 9 CE 22 5 LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R 1 Meanings of Symbols amp Safety Precautions 1 1 Meanings of Symbols 1 1 1 Symbols on the device Symbol Meaning Symbol Meaning Attention and warning Attention and warning for electric shock caon eal va sang EI T Attention and warning for v Attention and warning for aa ot to get hands cau Please fix the rotor I A firmly on place aims rotor coupling door opening and closing i i Indicate a hole for Attention and warning for naca manual door opening in correct way of sample a case of emergenc balancing in the rotor gency 1 1 2 Symbols in this document This symbol refers to safety Note relevant warnings and indicates This symbol refers to the important possible dangerous outcomes reminder 1 2 Safety Precautions Before using the instrument please read this operation manual to ensure correct usage through unders
17. opped The door can be unlocked manually with Emergency Door Open Tool through the emergency opening hole 1 Find the emergency hole on the left side of the instrument 2 Insert the Emergency Door Open Tool into the hole and push it until the door is released Manual opening should be performed only when spinning is completely stopped Otherwise harmful A damage will be accompanied to not only operators but samples After opening the door manually it is recommended to wait until normal electricity comes back 4 9 Fuse replacement When the power is not turned on please check the connection of power consent power switch Replace the fuse as following instruction if the power is still not turned on Action 1 Separate the AC Power Cord at the back of the instrument and push the flat head screwdriver for bring out the fuse case 16 LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R Connected Fuse in the power 2 Replace the damaged fuse with new one from the fuse case and then connect in the power 5 Maintenance 5 1 Outer Part of Instrument 1 Clean the outside of the instrument with dry soft cloth If necessary dip the cloth in neutral detergent and clean contaminated area Keep completely dry after cleaning 2 Do not use any volatile chemicals such as alcohol and benzene etc 3 Be careful not to make scratches on the surface of the instrument The scratches can cause
18. se within certain voltage limits Issued date March 06 2009 T T 00000 200 Sun Ki Kim President 22 Li i EL EN Refrigerated high speed micro centrifuge 1730R
19. sssessesssessssssessssssessessuesssssscssssssessssssessecsuccsecsuessecsseeseesseeseeses 8 EDNA 8 Technical Specifications mmmmnemrsnsrvsvsnssvsssssssssssesessersersserserssessersserseesserserssersersserssesserssrsserssesserssesssnne 9 Installation eeeeereeeersesrsesssesssssrsessessessessessessessrssessssessrsseessrsseessrsserssesserssesseesserserssersersserssesserssessenne 9 Power Omori and Door Release R aaa A APPAR AAAA Aa aaa aaaaaaaaAA APR aaa 9 Rotor Coupling and Disassembling ou cccccessessessessessessessscssecsessessessscssessecsesssssucssccsessesssssucsucssesseesessucesceueesesseeseceucesessseseeaeesees 10 POSON Ol S AM TU S ccc eae 11 BE EEE E MA EE A N ENAA 12 GSE RE 12 EEE 12 STS AT M AIA AlE 13 NAT Doca a O z EEEE 14 Program Saving amp Recalling w ccccscsssssssessessesssesessesssssesssesscssecsessessssusssccsessessucsucesessessessussucsscssessessucsuceuceueeseesssuceuceaeeaeeseeaseeees 15 0 E ENEA A A O O O A J 15 SE AE E EE 16 Emergency Door Open u ececssssssssessssesssssessssessssesseesssssessesucsessssnssussessesussessssucsessecnssussessesucsessesussessecnesucsessesusseesesueseeaeeneeeeseeneeneaees 16 PUSS REDAC COMON R 16 PA E 00090 0 8000000 900000090 nie 18 Outer part of Instrument u cccccccssesssessesssessesssessecssessesssessessuessecsuecsscsuesscsuecsscsuecsscsuccsscsuecsscsucssscsuccsscsucesscsueesecaucesecaueeseeaseenscass 18 Chamber O O O O O 18 SE 18 FT PO OPPO ROP 19 4 5 5 Tra
20. tanding Incorrect handling of the instrument could possibly result in personal injury or physical damage on the instrument or its accessories 1 ALWAYS locate the instrument on a flat rigid and stable table capable of withstanding the weight of the instrument and its spinning operation 2 ALWAYS make a safety zone of 30 cm around the centrifuge to indicate that neither hazardous LIYFRLIZENN Refrigerated high speed micro centrifuge 1730R materials nor persons should be permitted within the area during operation v ALWAYS position the instrument with enough space on each side of instrument to ensure proper air circulation 3 ALWAYS install the instrument within a temperature and humidity controlled environment Permissible ambient temperature 5 C 35 C Relative humidity lt 85 4 Before connecting the power check the rated voltage 5 Should not use unapproved rotors and accessories v Only use rotors from Gyrozen Co Ltd with appropriate centrifugal tubes and suitable adaptors to embrace sample containers tightly enough inside rotors 6 Before operating the instrument check if the rotor and the rotor lid are securely fastened v Should operate the instrument with a rotor properly installed and secured to the motor shaft 7 Mount the rotor on the motor shaft properly check it with spinning manually 8 Do not stop the rotor by touching with hand during the instrument is running 9 Emergency door open should be p
Download Pdf Manuals
Related Search