CP5-Series User Manual
Contents
1. ON OFF key to turn the scale on The display will show 88 8 at startup Immediately begin tapping the ON OFF key to change the weighing unit The scale will confirm your selection after a couple seconds then continue to normal operation GO 110 Units kg kilogram Ib pound VI Troubleshooting Problem Scale will not turn on Solution Check the batteries Problem Display will not stabilize Solution Make sure the weight is stable and not shaking or swinging Vil Error Codes 1 OUTZ Zero range has shifted Perform calibration adjustment If the problem persists the load cell may be permanently damaged due to overloading 2 OLd Maximum capacity exceeded Remove the extra weight to avoid damaging the load cell 3 LLLLL Load cell has been overloaded Vill Specifications GO 110 Max Capacity 110lb 50kg Readability 0 2lb 0 1kg Min Capacity 0 6lb 0 3kg 1 x CR2032 Dimensions 38x15x10 Strap Dimensions 10 long open 5 long closed Warranty 10 Year Limited Warranty2. American Weigh Scales GO Scale User Manual GO 110 110lb x 0 21b Copyright 2014 American Weigh Scales Inc All rights reserved Rev 1 0 GO Scale Manual Thank you for purchasing the American Weigh GO Scale Please read all operating instructions carefully before use Scales are precision measuring devices and should always be handled with proper care To ensure years of reliable service keep these simple tips in mind Do not exceed the scale s maximum capacity Overloading your scale can permanently damage it Avoid exposure to extreme heat or cold Scales perform best at normal room temperature If temperatures have changed dramatically calibration and adjustment may be necessary Allow your scale to warm up for 30 60 seconds before performing calibration and adjustment if available Store your scale in a clean dry location Dust dirt and moisture can accumulate on the weighing sensors and electronics causing inaccuracy or malfunction Avoid using your scale in close proximity to strong radio wave emitting devices such as computers cash registers and cordless phones Always weigh on a flat and level surface free from vibrations and drafts The corner of a room is usually the most stable Gently apply all items to be weighed Try not to allow the item to swing while being weighed Avoid dropping your scale The warranty does not cover damage due to rough treatment or overlo
3. ad Check the batteries first if you are having any trouble with your scale This simple step can remedy most scale issues Do not disassemble your scale This product contains no user serviceable parts I Part List 1 Scale 2 CR2032 Batteries x1 Il Key Description ON OFF f TARE Key E c3 lll Battery Installation 1 Before using the scale for the first time check the battery compartment and remove any plastic insulation strips or packaging that may be in place to prevent battery drainage during shipping storage 2 If you are replacing the batteries make sure the positive and negative contacts are properly aligned Positive Side Facing Out GO Scale Manual IV Operation fl 2 3 7 ou Press the ON OFF key to turn the scale on Once the start up process completes and the scale goes to zero you are ready to weigh Using the scales weighing strap attach the scale to he luggage handle Lift the scale allowing the luggage to hang freely Once the weight has stabilized the scale will beep and lock the current weight on the display The weight will remain on the display after the item is removed from the strap To re zero the scale tap he ON OFF key Once weighing is complete hold the ON OFF key to urn the scale off V Changing the Unit of Measure This scale can read in KG or LB To change the weighing mode follow these instructions 1 Tap the
Download Pdf Manuals
Related Search