installation and user instructions electric salamander grill model lgt
Contents
1. LYNA 4 INSTALLATION AND USER INSTRUCTIONS ELECTRIC SALAMANDER GRILL MODEL LGT Dear Customer Thank you for purchasing this Lincat Product This is just one of over 400 different items of catering equipment available from our range which is constantly being extended and improved Details are available from your local distributor or direct from us Used for the purposes for which it is intended and with careful maintenance as outlined in this user Guide your Lincat product will give years of trouble free use IMPORTANT INFORMATION Please read all of the safety and operating instructions carefully before using this product Please pay particular attention to all sections of this User Guide that carry warning symbols and notices WARNING This is a Warning symbol This symbol is used throughout the user guide whenever there is a risk of personal injury Ensure that these warnings are read and understood at all times CAUTION This is a Caution symbol This symbol is used throughout the User Guide whenever there is a risk damaging your Lincat product Ensure that these warnings are read and understood at all times IS320 ECN 3016 Page 1 SAFETY INSTRUCTIONS WARNING Basic safety precautions including the following should be followed to reduce the risk of personal injury Make sure you have read all of these instructions before switching on the unit Keep this User Guide in a safe place for future reference for you and your s2. it to the electricity supply The green neon will light up Turn the control knob to its maximum position and then set to the desired temperature CLEANING AND MAINTENANCE CLEANING Disconnect the unit from the electricity supply and allow to cool before starting to clean Use a mild detergent in hot water and a soft cloth Do not use abrasive creams or scourers MAINTENANCE Regular cleaning of the unit is recommended Regular maintenance is not required SERVICE INFORMATION For help regarding the installation maintenance and use of your Lincat equipment please contact our service department 4801522 875520 All service work other than routine cleaning should be carried out by one of our authorised service agents We cannot accept responsibility for work carried out by other persons To ensure your service enquiry is handled as efficiently as possible you need to have the following details available e Brief details of problem e Product code type number and serial number of unit both on serial plate Lincat reserve the right to carry out any work under warranty during normal working hours ie Monday to Friday 08 30 a m 17 30 p m IS320 ECN 3016 Page 3 GUARANTEE This unit carries a comprehensive UK twelve month warranty The guarantee is in addition to and does not diminish your statutory or legal rights The guarantee does not cover e Accidental damage misuse or use not in accordance with the inst
3. ructions in this User Guide or consumable items Damage due to incorrect installation modification or unauthorised service work e The manufacturer disclaims any liability for incidental or consequential damages IS320 ECN 3016 Page 4
4. taff GENERAL Do not clean the unit with a water jet Do not try to modify this product In the interest of hygiene you should clean the product after unpacking and ensure all plastic coatings are removed before use Ensure that the electrical supply cable is not damaged If the supply cable is damaged it should be replaced by Lincat Ltd or other suitably qualified persons in order to avoid a hazard Disconnect the unit from the electric supply before servicing or undertaking any electrical maintenance This appliance must be earthed TECHNICAL SPECIFICATION PACK CONTENTS Electric salamander grill with cable and 13 Amp 4 x rubber feet plug User instructions Grill pan Guarantee card Toast rack INSTALLATION Push rubber feet into base holes provided and ensure that the unit is installed on a sound level work surface which is heat resistant e g stainless steel or formica Inform your personnel that the external surfaces and base will become hot For safety regulations the plug must always be accessible CONNECTING TO THE ELECTRICITY SUPPLY Ensure that the voltage of your electricity supply corresponds to the serial plate details The product is supplied with a 13 amp plug e green and yellow wire to E or Earth blue wire to N Neutral e _ brown wire to L Live IS320 ECN 3016 Page 2 OPERATING INSTRUCTIONS Fig 1 Model LGT 1 Green neon 2 Control knob Connect the un
Download Pdf Manuals
Related Search