Home

Manual

1. Do not touch the camera with wet hands to avoid electric shock Do not disconnect the power cord from a power plug when still connected to the outlet S Always disconnect the power by removing the plug from the power socket If the camera emits a burning smell immediately disconnect it from the power source and report the problem to your distributor Cautions When Install Only apply power after installation of the product lt Do not install the camera in a position facing directly at a strong light source Do not install or use the camera in areas of high humidity Do not install near any cooling or heating equipment Do not install the camera in dusty environments 57 Do not install the camera in places where the camera is subjected to physical shocks 257 This products must be used with a regulated adaptor for power 3 ae 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems General Features 3D Filtering Method of Newly Advanced DNR Function Newly developed 3D filtering enhances Digital Noise reduction at low light levels 3D Filtering of the Video Signal Optimises the Signal to Noise ratio giving vastly improved low light visivility and a powerful Sens Up function up to 258 times magnification 550TV Lines The combination of a Sony Super HAD CCD image sen sor and DNR DSP provides an excellent resolution of 550 TV lines D WDR Digital
2. 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems qu 3 Select the desired mode and set the values by using the Left or Right button DELAY The range can be adjusted between 0 63 S LEVEL The start level can be adjusted between 0 100 E LEVEL The end level can be adjusted between 0 100 3DNR 3DNR is used to reduce the level of background noise in a low luminance environment 1 Move the arrow indicator to 3DNR by using the Up and Down button LENS EXPOSURE WHITE BAL DAY NIGHT 2 Select whether or not to activate 3DNR by using the Left and Right buttons ON Activates 3DNR Digial noise reduction can be adjusted between 0 100 OFF Deactivates 3DNR noise is not reduced 3DNR LEVEL RETURN Select RETURN by using the Up or Down button to return to Set Up menu 17 3D DNR DAY 8 NIGHT COLOR CAMERA Digital Video Security Systems 8 Special 1 When the SETUP menu screen is displayed select SPECIAL using the Up and Down buttons SETUP LENS DC 4 EXPOSURE 44 WHITE BAL ATW DAY NIGHT COLOR 3DNR ON H A SPECIAL gt ADJUST a EXIT 2 Select one of the mode using the Up and Down button SPECIAL 91 CAM TITLE OFF OFF 2 D EFFECT 3 OFF 4 PRIVACY OFF OFF 5 SYNC OFF OFF 6 RETURN 1 CAM TITLE When input the Camera ID is displayed on the monitor 1 1 Move the arrow
3. Digital Video Security Systems RETURN Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu NOTE Pressing the SET button in AUTO mode allows adjustment of image brightness by increasing or decreasing the shutter speed x2 x258 The higher the level the brighter the image becomes but it is possible that an after image ghosting could appear When SENS UP is activated the increased magnification can induce noise and pixelation this is quite normal Back Light BLC This camera provides intelligent light level control to overcome even strong backlight conditions 1 Move the allow indicator to BACKLIGHT using the Up or Down button on the SETUP menu screen 2 Select the desired level by using the Left or Right button EXPOSURE SHUTTER BRIGHTNESS RETURN OFF BLC function does not operate BLC Users can select and define a specific area in a scene and view the area clearly HSBLC When there are simultaneous brightness amp dark image areas HSBLC makes both distinct 11 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems BLC ON BLC OFF 3 Select a mode using the Left and Right buttons then press the SET button Select BLC to adjust the desired BLC area and GAIN level GAIN Adjust the BLC sensitivity by selecting LOW MIDDLE or HIGH DEFAULT Press the Default to back to the factory default when input the wrong data 17 Mo
4. 3D DNR DAY amp NIGHT COLOR CAMERA 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems CAUTION DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL 15014001 The lightning flash with arrowhead symbol within equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance INFORMATION This equipment has been tested and found to comply with limits for a Class A digital device pursuant to part 15 of the FCC Rules amp CE Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interfer
5. 1 250 1 500 1 2000 1 5000 1 10000 1 100000 BRIGHTNESS 0 100 Adjustable AGC OFF LOW MIDDLE HIGH SENS UP x2 x258 Level Selectable BLC OFF BLC GAIN LOW MIDDLE HIGH DEFAULT LEFT RIGHT WIDTH TOP BOTTOM HEIGHT RTURN HSBLC LEVEL RANGE 1 8 Selectable DEFAULT LEFT RIGHT WIDTH TOP BOTTOM HEIGHT RETURN D WDR OFF INDOOR OUTDOOR RETURN ATW AWB MANUAL R Gain 0 100 Level Selectable B Gain 0 100 Level Selectable AWC SET COLOR AUTO DELAY 0 63 S LEVEL 0 100 E LEVEL 0 100 RESET ON RANGE 0 100 Level Selectable OFF SHARPNESS RANGE 0 31 Level Adjustable BLUE RANGE 0 100 Level Adjustable RED RANGE 0 100 Level Adjustable RETURN Save the SETUP Menu and exit 5 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems Special Menu ON OFF FREEZE MIRROR 0 200 GAMMA NEG IMAGE AREA SELECT AREA 1 AREA DISPLAY ON OFF LEFT RIGHT 0 100 Level Adjustable WIDTH 0 100 Level Adjustable TOP BOTTOM 0 100 Level Adjustable HEIGHT 0 100 Level Adjustable SENSITIVITY 0 40 Level Adjustable RETURN AREA SELECT AREA 1 AREA DISPLAY ON OFF LEFT RIGHT 0 100 Level Adjustable WIDTH 0 100 Level Adjustable TOP BOTTOM 0 100 Level Adjustable HEIGHT 0 100 Level Adjustable COLOR Selectable in 15 Color RETURN 6 3D DNR DAY amp NIGHT COLOR CAMERA Digital
6. K Ex a fluorescent lamp or outdoors AWB The White Balance is automatically adjusted in a specific environment AWC SET obtain the best results press the SET button while the camera is focused onto white paper If the environment and or light source changes the White Balance will require re adjustment MANUAL Used for fine adjustment of White Balance Set White Balance first using ATW or AWC then change to MANUAL and press SETUP button Increase or decrease the value of R Gain Red and B Gain Blue while monitoring the colour of the image WHITE BAL MANUAL BLUE RED RETURN 15 ii M0 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems 8 Day Night Picture can be displayed in either colour of black and white 1 Select DAY NIGHT using the Up or Down button on the SETUP menu screen SETUP LENS EXPOSURE T WHITE BAL ATW ADAY NIGHT 3DNR ON 4 SPECIAL ADJUST RESET EXIT 2 Select the desired mode using the Left and Right buttons COLOR The picture is always displayed in color BW The White Balance is automatically adjusted in a specific environment AUTO The mode is automatically switches to COLOUR in normal conditions and switches to B W mode when ambient illumination is low To set the switching time or speed in AUTO mode press the SET button DAY NIGHT AUTO S LEVEL E LEVEL RETURN 16
7. M 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems 0 2 4 GAMMA Desired gamma values be adjusted between 0 05 1 00 2 5 NEG IMAGE ON Activates negative image just like film OFF Normal image 2 6 RETURN Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu 3 MOTION MOTION AREA SELECT AREA AREA DISPLAY ON LEFT RIGHT 100 WIDTH TOP BOTTOM HEIGHT SENSITIVITY RETURN 3 1 When the special menu screen is displayed use the Up or Down botton to access the MOTION menu D AREA SELECT Determines whether the MD area selected AREA 1 2 3 4 2 Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left Right button between the level 0 100 3 Move the arrow indicator to the LEFT RIGHT and TOP BOTTOM to select the desired area positon by using the LEFT or RIGHT button 4 Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left Right button between the level 0 100 2 95 d 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems M t 5 Move the arrow indicator to select the SENSITIVITY to increase or decrease by using the Left Right button between the level 0 40 RETURN Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu 4 PRIVA
8. Video Security Systems qq M Menu Set Up Menu items can be selected by using the OSD buttons of the camera 1 Press the Set Up button The Set Up menu will be displayed on the monitor LENS EXPOSURE WHITE BAL DAY NIGHT 3DNR SPECIAL ADJUST RESET EXIT 2 Move and select the required function using the Up and Down button Move the arrow indicator Up or Down to select the desired feature by pressing the Up or Down button SETUP ALENS EXPOSURE T WHITE BAL ATW DAY NIGHT COLOR 3DNR ON SPECIAL ADJUST RESET EXIT xa 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems CS 3 Changing menu settings using the Left or Right button Available values or Status are displayed by pressing the Left or Right buttons Press the button until desired value status is displayed 4 After completing the setting move the arrow indicator to EXIT and press the SET button to EXIT Lens 1 Move the arrow indicator to LENS using the Up and Down buttons on the Set Up menu screen 2 Select the desired lens type by pressing the Left or Right button LENS EXPOSURE WHITE BAL DAY NIGHT 3DNR SPECIAL ADJUST RESET EXIT gt DC DC Auto Iris Lens 8 3D DNR DAY amp NIGHT COLOR CAMERA 3 Press the RETURN to return to the SETUP menu Exposure This function is used to select Automatic or Manual shutter
9. Wide Dynamic Range D WDR is a powerful and ultra advanced technology that captures cleaner and superior high Resolution pic tures even where images appear dark because there is a strong back light present High Spotlight BLC Function High Spotlight BLC Function is Especially Effective to Read the Number Plate of the Vehicles in the Street or Parking Lot at Night Time Especially Users Can Adjust and Select the Special Required Area to Observe the Target Object Under the Strong Spots of Light Exist Illumination tas With an Incredibly Minimum Illumination of Amazing 0 00001 Lux can Capture Good Images Even in Extremely Low Light Conditions and Related Noises are Significantly Reduced by the Ultra Advanced DNR Digital Noise Reduction Technology Disk Saving Effects DISK SAVING Advanced 3DNR technology improves picture quality and saves hard drive space as less noise means much smaller file sizes much smaller than standard CCTV camera images a Additional Functions ia OSD On Screen Display menu with multi Language support Privacy Masking 8 zones Sens Up x258 times Digital Zoom x36 4 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems Menu Set Up DC MANUAL SHUTTER BRIGHTNESS RETURN AUTO B W COLOR EXT Refer to the next page SHARPNESS BLUE RED RETURN FACTORY DC LEVEL 0 100 Adjustable SHUTTER FLK 1 60
10. CY Hide an area you want to hide on the screen 4 1 When the SPECIAL menu screen is displayed press the Up and Down buttons to set to PRIVACY SPECIAL 1 CAM TITLE OFF 2 D EFFECT A 3 MOTION OFF 44 PRIVACY OFF ON E 5 SYNC OFF 6 RETURN H 4 2 Set up the area mode using the 4 direction buttons 1 AREA SELECT You can select up to 8 MD area PRIVACY AREA SELECT AREA DISPLAY LEFT RIGHT WIDTH BOTTOM HEIGHT COLOR RETURN 2 AREA DISPLAY OFF Disabled ON Activates area display 24 a 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems p M 2 8 Move the arrow indicator to WIDTH to make desired width of cells to increase or decrease by using the Left Right button between the level 0 100 4 Move the arrow indicator to HEIGHT to make desired height of cells to increase or decrease by using the Left Right button between the level 0 100 5 Move the arrow indicator to the LEFT RIGHT and TOP BOTTOM to select the desired area positon by using the LEFT or RIGHT button 6 Move the arrow indicator to COLOR to select the desired color of each area cells by using the Left Right button between the 15 different color RETURN Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu 5 SYNC INT Internal Synchronisation Move the arrow indicator to RETURN after complete the setup to r
11. LOR CAMERA Digital Video Security Systems o D WDR digital WDR This camera provides intelligent light level control to overcome even strong backlight conditions 1 Move the allow indicator to D WDR using the Up or Down button on the EXPOSURE menu screen 2 Select the desired feature by using the Left or Right button EXPOSURE SHUTTER 1 60 BRIGHTNESS rs LOW SENS UP VE BLC BLC lt i 4D WDR OFF RETURN 4 D WDR When there are simultaneous brightness amp dark image areas WDR makes both distinct and can be selected desired feature between OUTDOOR and INDOOR OFF D WDR function does not operate RETURN Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu 14 p M MM 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems 9 White Balance The White Balance function is used to control the on screen colours 1 Move the allow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button 2 Select the desired mode by using the Left or Right button SETUP LENS DC 4 EXPOSURE 41 WHITE BAL ATW DAY NIGHT COLOR 3DNR ON 4 SPECIAL ADJUST RESET EXIT There are three user selectable White Balance settings available ATW Auto Tracking White Balance Normal setting when the colour temperature range is from 1 800 K to 10 500
12. PQRSTUVWXYZ boxer Cos EE CLR POS END 2 Created camera ID is displayed Factory default position 20 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems 8 Select a new position by using the four directional button Press the SET button to confirm the position 2 D EFFECT Move the cursor to D EFFECT and press the SET button to set the other image functions SPECIAL 1 CAMTITLEOFF OFF 92 D EFFECT 3 MOTION OFF OFF 4 PRIVACY OFF OFF 5 SYNC OFF OFF 6 RETURN a 2 1 FREEZE Image freezing or moving Image D EFFECT LA FREEZE 2 MIRROR V FLIP 3 D ZOOM OFF 4 GAMMA 0 45 5 NEG IMAGE 6 4 21 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems qp 2 2 MIRROR Flip the image horizontally on the screen D EFFECT 1 FREEZE 42 MIRROR V FLIP 3 D ZOOM OFF 4 GAMMA 0 45 5 NEG IMAGE OFF 6 RETURN a V FLIP Flip the image vertically on the screen ROTATE Flip the horizontal image vertically on the screen OFF Disabled MIRROR ON MIRROR OFF 3 D ZOOM Digital zoom available range x1 x32 PAN The pan range can be controlled between 10 100 TILT The pan range can be controlled between 10 100 D ZOOM PAN onc 20 Beek cra a RETURN 44 22 MM
13. R RReR nneennII 2 Sefety Instructions aioe eae tO ae 3 General Features E 4 Menu Set Up 5 gt Menu Set Up rr 7 Lens Set Up VON M RU ere ele eara e uu cq Vea RE CR 9 Exposure 9 Back Light rp ay a rc ee ee ee eee ee ee 11 PD WDR ttt tte tere 000697 14 gt White Bal Qao S a ee ee ee ai e d RR cR o NE ue RUN 15 gt Day amp Night FERA RU ERE Oe eT eee eee dq eee I dup dope ad d Eo 16 18 eCameraTitle eere hh hh hh hh hh nnn 18 Effect ceca mU ceci aD a e ARTE E TR ter TU CA D UR 21 amp Motion 23 Privacy aa wh es tay Scie celle swt 18 24 e Sync rrr 25 Return Vi v eee ee 879097 eee ee Er eee 9 8 E S OU S 26 gt Adjust oR ee SS 26 Res
14. ence at his own expense WARNING Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment CAUTION To prevent electric shock and risk of fire hazards Do use power sources other than those specified Do NOT expose this appliance to rain or moisture This installation should be made by a qualified service person and should conform to all local codes 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems Precautions Only use the camera under conditions not install or use the camera inan Severe lighting change or flicker can where temperatures are between environment where the humidity is cause the camera to work improperly 10 C and 50 C Be especially careful high to provide ventilation whenoperating under high temperatures This is one of the most important parts It can cause malfunctions to occur Severe lighting change or flicker can of the camera Be careful not to leave cause the camera to work improperly fingerprints on the lens cover NOTE If it gets wet wipe dry immediately If exposed to radioactivity the CCD Liquids can contain minerals that will fail corrode the electronic components 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems 0 Contents Contents 1 About 3D DNR eee IRR RMRIRM MMIHIRRR
15. et M RR EU dew use a S Ao RUN oes Oe 26 Exit i 26 Trouble Shooting D 27 1 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems About D WDR BLC 3D DNR G 550TV Lines OSD Control Digital Zoom HS BLC Digital WDR SETUP EXPOSURE SPECIAL 1 LENS P SHUTTER 1 CAM TITLE E a BRIGHTNESS 3 WHITE BAL ATB AGC 4 DAY NIGHT SENS UP 5 3DNR BLC D WDR RETURN Digital WDR OFF Digital WDR ON 622 9194 Normal BLC HS BLC Standard Image Minimum Illumination Image 2 ENERAL FEATURES 1 8 Sony Super HAD CCD Up Most High Resolution 3D DNR Color 550TV Line B W 600TV Lines Built In Next Generation 3D DNR with 3D Filter Max Sens Up x258 0 00001 Lux of Min Illumination Convenient OSD control function x32 Digital Zoom Free Area Selectable function of BLC and Privacy Color Masking for 8 Area selection Max 70 of Disk Saving Effect with Super DNR Negative Image Function Digital Wide Dynamic Range Function D WDR 3D Filtering Method of Newly Advanced DNR Function Newly developed 3D filtering enhances Digital Noise reduction at low light levels 3D Filtering of the Video Signal Optimises the Signal to Noise ratio giving vastly improved low light visivility a
16. eturn to SETUP menu ADJUST 1 When the SETUP menu screen is displayed select ADJUST using the Up and Down buttons SETUP LENS Do EXPOSURE 1 WHITE BAL ATW DAY NIGHT COLOR 3DNR ON SPECIAL AADJUST RESET e EXIT 25 i 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems qp M 2 Select the desired mode by using Up or Down button ADJUST gt SHARPNESS BLUE RED RETURN SHARPNESS Improving image clarity The level can be adjusted to obtain an improved image However when the level is set too high it can distort the image or cause noise Select BLUE or RED to increase or decrease the value of R Gain RED and B Gain BLUE while monitoring the color of the image RETURN Move the arrow indicator to RETURN after complete the setup to return to SETUP menu RESET Resets the camera settings to the factory defaults EXIT Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu 28 i MH 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems 9 Trouble Shooting PROBLEM POSSIBLE CAUSE Northing appears on the screen The image on the screen is dim The image on the screen is dark The ee is ae working proper and bi the camera is ho
17. indicator to CAMERA ID using the Up or Down button on the SETUP menu screen 1 2 Set to ON using the Left or Right button 18 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems 0 3 Press the SETUP button CAMERA TITLE 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ce os LEE i CLR POS END 1 4 The CAMERA TITLE can be up to 15 alphanumeric characters in length CD Move the cursor to choose an alphanumeric character CAMERA TITLE 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ Dive et 22 CLR POS END 2 Choose a character in displayed range A Z a z 0 9 using the Up Down Left and Right buttons 8 Select the desired character by pressing the SETUP button The cursor moves to the next position after character input by pressing the SETUP button 4 Repeat the above steps until the Camera ID has been created 19 Qg M M M A 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems NOTE In cases where the wrong Camera ID has been input Move the cursor to CLR and press SETUP button to erase characters from left to right and repeat the above steps to input the characters again 1 5 To select the position where the Camera ID should be displayed on the screen CD Move the cursor to POS and press the SET button CAMERA TITLE 0123456789 ABCDEFGHIJKLM NO
18. nd a powerful Sens Up function up to 258 times magnification 550TV Lines The combination of a Sony Super HAD CCD image sen sor and DNR DSP provides an excellent resolution of 550 TV lines D WDR Digital Wide Dynamic Range D WDR is a powerful and ultra advanced technology that captures cleaner and superior high Resolution pic tures even where images appear dark because there is a strong back light present High Spotlight BLC Function High Spotlight BLC Function is Especially Effective to Read the Number Plate of the Vehicles in the Street or Parking Lot at Night Time Especially Users Can Adjust and Select the Special Required Area to Observe the Target Object Under the Strong Spots of Light Exist Illumination With an Incredibly Minimum Illumination of Amazing 0 00001 Lux can Capture Good Images Even in Extremely Low Light Conditions and Related Noises are Significantly Reduced by the Ultra Advanced DNR Digital Noise Reduction Technology 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems je T Safety Instructions Precautions for use Please read this manual thoroughly before using the camera to become familiar with the correct operational procedures Cautions When Using Do not open the camera body and touch any electrical parts to avoid possible electric shocks Do not insert objects into the camera body to prevent fire hazards and electric shock
19. speed control 1 On the Set Up menu screen select EXPOSURE by using the Up or Down button 2 Select the desired shutter mode by pressing the Left or Right button SETUP LENS HdEXPOSURE WHITE BAL ATW DAY NIGHT COLOR 3DNR ON SPECIAL ADJUST RESET EXIT FLK Select FLK mode when flickering occurs caused by the unmatched frequency of electric lights 9 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems EXPOSURE p gt SHUTTER BRIGHTNESS SENS UP BLC D WDR RETURN 44 NOTE To produce better results with FLK do not use it in conjunction with the WDR mode in the BACKLIGHT menu Desired shutter speed can be selected by user 1 60 1 250 1 500 1 2000 1 5000 1 0000 1 100000 FLK Brightness just can operate when selected the Manual mode Option When selected DC mode brightness will be disabled AGC AUTO GAIN CONTROL A higher gain increases brightness but also increases any noise OFF Deactivates the AGC function LOW Allows automatic gain control to LOW MIDDLE Allows automatic gain control to MIDDLE HIGH Allows automatic gain control to HIGH SENS UP At night and or in dark conditions the Sens Up mode can be selected desired value from x2 x258 Select FLK mode when flickering occurs caused by the unmatched frequency of electric lights SENS UP gt SENS UP RETURN 10 3D DNR DAY amp NIGHT COLOR CAMERA
20. t Motion Detection is not activated The color of the picture is not correct The image on the screen flickers The SENS UP does not work Check the power cable power supply output and video connection between the camera and monitor Are the camera lens or the lens glass dirty Clean the lens glass with a soft clean cloth Adjust the monitor controls as required f the camera is facing a very strong light change the camera position Adjust the lens focus Adjust the contrast control of the monitor f there is an intermediate device correctly set the 75O Hi z Check the camera is correctly connected to an appropriate regulated power source Has MOTION DET been set to ON the menu Has MD AREA been properly defined Check the settings in WHITE BALANCE menu sure that the camera isn t facing direct sunlight or fluorescent lighting If necessary change the camera position Check that the AGC setting in the EXPOSURE menu is t set to OFF c Check the EXPOSURE menu and make sure SHUTTER is set to 2O7 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems Q eOeOAOeeeerram MEMO 28 oM 3D DNR DAY amp NIGHT COLOR CAMERA
21. ve the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left Right button from 0 7 cells 2 Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left Right button from 0 7 cells 8 Move the arrow indicator to the LEFT RIGHT and TOP BOTTOM to select the desired area positon by using the LEFT or RIGHT button 242 M 3D DNR DAY amp NIGHT COLOR CAMERA Digital Video Security Systems Move the arrow indicator to RETURN and press the Set Up button after complete the BLC area set to return to EXPOSURE menu 4 Select HSBLC High Suppress Backlight Compensation by using the Left and Right buttons then press the Set Up button to set up the desired HSBLC area and GAIN level HSBLC OFF HSBLC ON LEVEL Adjust the HSBLC sensitivity by selecting between 0 8 DEFAULT Press the Default to return to the factory default when input the wrong data D Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left Right button from 0 7 cells 2 Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left Right button from 0 7 cells 8 Move the arrow indicator to the LEFT RIGHT and TOP BOTTOM to select the desired area positon by using the LEFT or RIGHT button 13 d 3D DNR DAY amp NIGHT CO

Manual

Contents

Download Pdf Manuals

Related Search

Related Contents