H.264 4CH DVR User manual
Contents
1. Rate Select the rate which matches the connected PTZ Data Bits Select the data bits which match the connected PTZ Stop Bits Select the stop bit which matches the connected PTZ Checksum Select the check value which matches the connected PTZ Flow control The selected item must be consistent with the matched PTZ flow control settings Protocol type The selected item must be consistent with the matched PTZ protocol Decoder address Enter the address of the specified decoder Preset point setting preset point is to preset and memory position focal length aperture and zoom of camera while using a number to mark these settings Add a preset point In the pre edit box enter a preset point the range of which is 1 128 and then through the arrow keys to adjust the distance from the camera to the target location and after adjustment press setting and the preset point is saved Delete preset point In the edit box enter a preset point which you want to delete select Delete The cruise path setting number cruise path is a path on which the camer runs at a certain speed by passing more than a cruise points which have serial numbers and each cruise point includes preset stop points and stop time so the cruise path settings includes the settings of cruise point preset point stop time Cruising speed and other parameters and in the settings interface you can set he appropriate information At present a piece of equipment2. encodes images according to bit rate and video frame rate which the user sets variable bit rate means the system encodes images according to image quality and video frame rate which the user sets but the bit rate is that the system automatically adjust according to the video scene Bit rate the bit rate which users select to encode according to need The higher the bitrate the better the image but the occupied disk space is larger Video frame rate the video frame rate which users select to encode according to need The higher the frame rate the better the image smooth but the occupied disk space is larger Copy to In the select box on the right of Copy To button select the target channel click the copy to button and the system will apply the current channel setting information to other target video channel When the page setup is completed click OK button then the settings are saved and exit click Cance button then the setting information is not saved and exit 25 26 Owner s manual 3 8 2 3 Image settings In the System Settings interface select Image Settings to enter the settings interface Select channel Select the channel you want to set click the select box to select Channel Name In the edit box the user own can edit the channel names For the edit method see 3 3 2 4 edit box Display name Nr means display Jr means not to display Click Location button to enter the sett
3. then the following setting functions take into force No means not to do any treatment PTZ linkage Click the Settings button to enter PTZ linkage settings interface Select a channel number and perform the relevant settings of PTZ linkage preset point cruise trajectory For PTZ setting methods see 3 8 2 8 27 28 Owner s manual Delay When alarm input ends the setting needs the extension of time of various treatment Buzzer Whether to trigger the alarm buzzer ap means enable lr means invalid Video channel When setting alarm input you need to trigger the specified video channel number Alarm output When setting alarm input you need to trigger the specified alarm output channel number Copy to In the select box on the right of Copy To button select the target channel click the Copy to button and the system will apply the current channel setting information to other target video channel After the page setup is completed click OK button the setting information is saved and exit click Cancel button he setting information is not saved and exit 3 8 2 5 Alarm output In the System Settings interface select Alarm output to enter its settings interface Output channel Select the target channel you want to set click select box to choose Alarm type Normal close type and always open type select corresponding type Time period Aye enable valid time settings of alar
4. Then operation of the device takes into force SHIFT the current version does not support the key CLEAR when setting covering and mootion detection region clear the current constituency Note when there are more than one device in the same place remote control firstly must accor ding to device number select a piece of equipment so defining a unique device number for each device is a must or remote control operation may at the same time make effect to more than one device which has the same device number 2 4 Video format In the video format switches on the device motherboard perform video format settings PAL format status NTSC format status Chapter 3 Operating system instructions 3 1 On off Confirm that swith in current and voltage is consistent with the hard disk recorder which meets re quirements and ensure that middle power outlet of the hard disk recorder is well grounded After access to power the device starts POWER light which is green and after entering the system the panel RUN light normally flashes Long press POWER key for 5 seconds to make the machi ne soft off and the light is red then again press POWER to restart Owner s manual 3 2 Preview aye af ee our hs e eene SE Car e rage za put wy Rn mg e e ne 4 O e Lei wem lt s er s CT e nas CH 07 E After normal equipment boot immediately enter the preview screen In the preview screen you can see
5. list of playback query results press confirm ENTER key or the left mouse button to play the file you can use the right mouse button to select cancel the video file in order to easily backup video files 4 edit box through the edit box enter the target name For example in the System Configuration menu page the device name edit box enter numbers English letters Chinese and so on a through the FN key or in the W2 click the left mouse button to switch input types including numbers case letters punctuation marks Chinese input method b through the panel lt gt key or the mouse cursor mobilely positioning location of the edit box press ENTER key or click the left mouse button then the enter keyboard appears through the arrow keys or clicking the left mouse button to select the target characters which need to be entered c by SHIFGT key or click the right mouse button to delete the character before the cursor d After entering press MENU key or ESC key to exit edit status 5 button it s used to perform a specific function or enter the next one setting menu press confirm ENTER key and the left mouse button to determine access 3 3 3 Exit Menu mode Press MENU Exit ESC or the right mouse button to exit the menu mode and switch to a multi screen preview mode Click the right mouse button return to the previous menu level 11 Owner s manual 3 4 Main menu introdu
6. product or Its literature indicates that It should not be disposed with other household wastes at the end of its working life To prevent possible harm lo the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal Made in China for LECHPOL Zbigniew Leszek Mi tne 1 Garwoli ska Street 08 400 Garwolin CE SS CABLETECH www cabletech pl
7. set the menu language type select Simpli fied Chinese English Status display in the preview screen set whether to display video mode status and open the information icon of motion detection which is marked as Ap to show state it s marked L as non display status Icon status description in the lower left corner of pannel preview screen indicates that the system is recording video regardless of video type indicates timing recording status A means the manual recording status f means motion detection status de means motion detection recording After the page setting is completed click OK button the settings are saved and exit click Cancel button the setting information is not saved and exit 3 8 2 2 Video Settings In the System Settings interface select Video Settings to enter the settings interface Owner s manual Channe Select channel Select the target channel you want to set click the select box to select Stream Select the code stream which needs to set which are respectively main stream and sub stream Stream type Select the needed video stream type and video streaming means only to encode the video when the system is recording video composite flow means to encode audio and video at the same time when system is recording Bit rate type Users can set fixed rate and variable bit rate and fixed rate means the system
8. supports 16 cruise path number settings 31 32 Owner s manual Track settings track is a irregular movement line which camer pre defines and enter settings you can set the trajectory Copy to In the select box on the right of Copy To button select the target channel click the Copy to button and the system will apply the current channel setting information to other target video channel After the page setup is completed click OK button the setting information is saved and exit click Cance button the setting information is not saved and exit 3 8 2 9 Network settings In the System Settings interface select Network Settings to enter the settings interface which respectively includes the Ethernet PPPOE DDNS configuration Ethernet contiguration In the network configuration interface select the Ethernet Configuration to enter its settings interface 10 20 18 24 68 DHCP B 192 168 001 143 Net Mask 255 255 255 000 192 168 001 001 DNS 192 168 001 001 8671 Http Port CANCEL j Owner s manual Physical Address It displays the physical address number of the device Port number The port number must be greater or equal to 2000 IP address The IP address must be unique and can not conflict with any other host or workstation on the same network Subnet mask It s used to divide the network segment Default gateway It s used to achieve com
9. the search criteria are more than 4000 then the system only shows the latest 4000 video files If you want to find the updated files please modify the search criteria Playback By time According to set starting and ending time to start playback of video material No distinction of video types playback tools control please refer to 3 5 3 By time backup Backup all video data to the designated storage devices during the set beginning and ending time 13 Owner s manual 3 5 2 Search results Channel ea 3 Type Benue HEI Lu Duration 8010 08 Store To After setting search criteria click File Search button then enter the search results interface Index Channe Sel ect 2010 08 13 10 38 54 85262k 2010 08 13 10 07 24 6092k 2010 08 13 10 00 44 4684k End Time 2010 08 13 11 20 54 opar Stot e F Ki Backup Playback video files in the search results list box through the upper and lower key or moving the mouse to position the target file click the ENTER key or left mouse button to start playing the file 14 Owner s manual Backup In the search results list through the upper and lower key moving the mouse to target file and then use the FN key or the right mouse button to select the file in the storage equipment selection box select the target storage devices and then click Backup button then the selected video file will be backed up to the target storage device Cancel button re
10. EN SS CABLETECH H 264 4CH DVR User manual URZ0132 Please read this instruction thoroughly before operation and retail it for future reference Owner s manual ITEM Chapter 1 Product descripti sic egenen gege A ege EE 4 Wel ele te EE 4 1 2 technical e e 4 Chapter 2 Instruction of product appearance struct 5 2 AV ANS SSW CU eege 5 2 2 lte E pori Geer e 6 220 remote COMPO EISEN ege AE EE AE EE 7 e OPA Sd en a a E 8 Chapter 3 Operating system INSMUCUIONS 422 5rssrnssssrreensssemonntenesmenenennnenites teens oreensnsienteut 8 OS EE 8 e 9 3 3 basic operation instructions Of IMEI ege Ad sente mcentetsencisolcrnoicnneteneetiesatee 9 99 Temer Menu MOUE eege AE EE 9 9 5 2 COMPOSILE instructions OF MENU EE 11 O00 EX MGM OO orc ss E AAE EnaA E ANE 11 9 4 Main mMenu nee e dE 12 2S Video ee 13 SA santana E EEE E E E TE E A A E T 13 2 ee A de E 14 2 9 9 PlayDaACk ele Een e EE 15 OO manual TOCO tee Ee EE EE 16 SR PE COR E 17 RSR EE 17 3 6 management e CPR AE EEA ESSIE IERA ER n dai 18 OZ OVSE dn Le EE 22 Se Wee 34 9 10 Shutdown TNS SV SIS E 35 Chapter 4 Client operation INSUPLUICTIONS 0 lt as0322ccen03 conacetseedcanevebacsesaniasaessenbneceseanctsedssacesebaescdceaancel 36 4 1 main page OF video MMONMOR E 37 Be ne ne ini aair ieia AE ara bira oise eee ges amer 37 A E COPE E oT A IGM SE din see 38 HO MGI SE MING DOK EE 38 ee ie la KEE 38 4 6 1 server parameters COMMMOUPALION sais ca cece ss
11. anagement clear the alarm log query software upgrade restoring the default turning off the system set up instructions of the host Record and capture image to save the directory preserving path of setting path and capturing video 41 42 Owner s manual 4 6 6 Remote playback Select video playback channel number the recording type and time conditions click the Search button then the left border will show the search result list You can scroll the page from top to bot tom or enter the page number to jump to view the video file a file display 20 pieces of information and up to 4000 File playback in the search list box select the target file double click the file or click the File Playback button then the right playback window starts to play the target tlle and the playback control is the same as that of the host Timing playback Click Time Playback button then the playback window will start playing the video file ofthe start time which have been set Download In the search list box select the target file click File Download button and after setting the preserving path it starts to download the target file The lower progress bar shows the progress and status of downloading the file English K Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and othor European countries with separate collection systems This marking shown on the
12. ave and exit Owner s manual Partial elimination mave the yellow box to the start region which need to be eliminated upper left press FN key to enter a small black box to eliminate the regional boxes and the localized area is eliminated After elimination press confirm ENTER key to save and exit and if you press exit ESC key the elimination operation is invalid In the red box click the left mouse button or long press left key to move mouse to eliminate area click the middle button of mouse to exit and save Clear All Press MENU to clear all covered areas of the channel Copy to In select box on the right of the Copy To button select the target channel click the Copy to button and the system will apply the current channel setting information to other target video channel Note Channel names can not be copied After the page setup is completed click OK button the settings are saved and exit click Can cel button the information is not saved and exit 3 8 2 4 Alarm input In the System Settings interface select Alarm Input to enter its settings interface Low Volt v v MBEBASKE WEIB Input channel Select the channel you want to set click select box to choose Alarm type you can set high low voltage please select the appropriate level for the alarm corre sponding to alarm input channel connection Detection you can set whether to test alarm input signal Select Yes
13. ction Press MENU key or the right mouse button to pop up the main menu main menu consists of the following three components Preview mode in the menu column you can select the corresponding screen preview mode Shortcut menu in the menu column respectively have video playback manual recording shortcut menu of PTZ control you can directly enter the corresponding menu pages The main menu bar after clicking to enter include management tools system settings log query shut down the system of the menu page and so on gt S Tools Setup Log Shutdown HDD management user management software upgr ade time setting and clear alarm 12 Owner s manual 3 5 Video playback Click video playback of the main menu column enter file search interface Channe 18 3 4 Type B anua t arm E SOH Store To U Di 3 5 1 File search Select channel Select the target channel you want to search click the check box to choose Video Type Select the video type which needs to search N means to be checked 7 means not to be selected Time setting in the edit box enter the beginning and end time to search the video Storage device in the selection box select the target backup storage device Search files button after setting the search criteria click the button then the system begins to search the corresponding video files and enter the search results interface NOTE If video files meeting
14. date time channel name of the system Press number key corresponding to panel or click the left mouse button you can preview a single image then press Panel Quard button or click the left mouse button you can return to a multi screen preview status 3 3 Basic operating instructions menu 3 3 1 enter the menu mode Main Menu MENU key to enter the device s main menu interface Owner s manual PLAY shortcut keys enter playback interface E hanne A 4 Type E sanua Alarm 2010 08 20 08 45 03 _ Duration Store Tel voten Y PTZ shortcut keys enter PTZ control interface 10 Owner s manual 3 3 2 menu composition description Menu component units mainly consist ofthe following categories 1 box provide two kinds of status options Nr means effective n means ineffective use con firm ENTER key or key or click the left mouse button to choose For example in the file search menu page the Select Channel page and the video type check box 2 selection box According to the options contents of the system drop down box select the target content Use ji LI key or click the left mouse button to select For example in the file search menu page the Storage Device selection box 3 list box query results information display in the list you can select one of the operation in the provided list to operate accordingly For example in the
15. de files to the root directory of U disk plug U disk and then click OK to upgrade the system FTP Upgrade put the upgrade file into the root directory of FTP server s and set the server IP address as the specified address and finally click OK to upgrade the system After upgrade the system will automatically restart NOTE Motherboard upgrade file name must be mainboard bin Panel upgrade file name must be panel Bin When system is being upgraded dont disconnect the power supply so as to avoid equipment failure 21 Owner s manual 3 8 1 6 Time setting Enter date and time page in the Date time edit box respectively enter the exact date and time ccntirm the save and cancel to exit 3 8 1 7 Version Device Name Net DVR Mode R9508 Version V_1_3_4 build dul 23 2010 WS You can see the device name model related information of version number 3 8 2 System settings In the main menu page select System Settings to enter its sub menu interface 22 Owner s manual Setup Recor d Video Alarmin Alermout gt FS KR 3 8 2 1 System configuration In the System Settings interface select System Configuration to enter the setting interface Device ID Standard PAL Device Name VGA 800 600 V Overwr ite Transparency ET Look Time Language Auto Switch ile Merve ball Sa Device number When using the remote control to remote and control operate equipment which must be through th
16. e device number communicating with the remote control the remote control must correspond to the device number to achieve remote operation For the settings of remote control device number see the 2 3 instructions Equipment name device name is generally defined as the regional name of control points and when remote access you can intuitively find the monitoring point what you want to access The default device name is NetDVR For editing method see 3 3 2 4 edit box 23 24 Owner s manual Equipment expiration When selecting coverage and when the hard disk inside the device are all fully recorded the system covers the first video data to achieve the purpose of circulating the video Keyboard lock time the system has no operation during the set keyboard lock time then the sys tem will automatically log off the current user and itneeds to re sign on system to operate Switching time switching time is cycle time period of single channel preview display Video format The device supports PAL and NTSC video output formats The default output format is PAL For setting method please refer to 2 4 VGA resolution the user can adjust the VGA display resolution according to VGA monitors Menu transparency After entering the user operation interface you can by adjusting the level of menu transparency to achieve the transparency between the preview screen and menu Language According to the needs of users you can
17. e hard disk Hard Format In the hard disk select box select the target disk and you can view the information corresponding to the hard disk click Format button to turn up a confirmation page click ORT button to begin formatting the hard disk after the hard disk format is completed the hard disk can be used normally Note before the hard disk formatting stop all recording 18 Owner s manual 3 8 1 2 User management User Management Create and add users delete users and modify user information the users except Admin have no rights to set up additional user rights Create a new user Enter the User Management interface click the Add button tO enter adding user interface eer Nee ee RE Local Rights Tag Record IER Set BB Los ECAR 1 Enter the new user name In the User Name edit box enter a new user name such as the user Note for input methods see 3 3 2 4 edit box 19 20 Owner s manual 2 Set the new user s password In the Add User interface select Set Password button enter the password setting page and directly enter the new password which is less than six figures 3 Setting up new user s permissions In the Add User interface set the new operating authority for the user within the box of the cor responding function to choose and Ni means that the user can use the permission JI means that the user can not use the permission 4 Save the
18. ec GH 2 3 4 Al armout H Buzzer Sens we Pa Duration 5 Sec w Send Mail amp Select channel Select the target channel you want to set click the select box to select Type you can select motion detection video loss Video channel Select the specified alarm output channel number which needs to trigger after detection occurred Alarm output Select the specified video channel number which needs to trigger after detection occurred Buzzer Whether to trigger the alarm buzzer NV means enable Jr means invalid Delay When alarm input ends the setting needs the extension of time of various treatment Area Set motion detection area and the setting methods see 3 8 2 3 setting cover region Sensitivity Select to trigger motion detection sensitivity No detection means the above set parameters are invalid Copy to In the select box on the right of Copy To button select the target channel click the Copy to button and the system will apply the current channel setting information to other target video channel After the page setup is completed click OK button the setting information is saved and exit click Cancel button the setting information is not saved and exit Owner s manual 3 8 2 8 PTZ settings In the System Settings interface select PTZ Settings to enter the settings interface Select channel Select the target channel you want to set click the select box to select
19. graphical operation interface which supports mouse panel remote control PAL 720x576 D1 NTSC 720x480 D1 Motion detection the detection area of each channel 16x16 which can be set multi level sensitivity Screen display 1 4 screen display Owner s manual PAL 25 frames sec adjustable NTSC 30 frames sec adjustable Chapter 2 Introduction of product appe arance struct 2 1 Panel description OTO 1 CH 11 Left 2 CH 12 Down 3 QUAD 13 Right 4 MENU 14 Up 5 ESC 15 OK 6 REC 16 Start indicator 7 PLAY PAUSE 17 Record indicator 8 STOP 18 Power LED 9 REW 19 Infrared receiver window 10 FWD 20 PTZ Owner s manual Interface part of the key Mouse USB1 1 interface is used for the mouse to connect CH amp CH video channel control keys which are used to switch the current video channel Up Down Left Right Move control keys which is used for the movement and choice of menu control Enter confirm button which is used to confirm the selected items Menu it s used to transfer out of the system menu Esc Return or cancel Quad split screen mode switch Rec Open the manual recording page Play Open the playback page Ptz Open Cloud Mirror Control Page Light hole part Power power indicator bright when power on green HDD hard disk light bright when hard disk is working RUN Running lights bright when hard disk is running IR remote control rece
20. ing interface you can via panel keys or the mouse dragging the red channel name to set and after set up press ENTER key or right mouse button to save and exit press ESC key not to save and exit Image parameters Respectively configure the brightness contrast hue and saturation of channel image use the panel t keys or the mouse to drag scroll to adjust Use the default values By clicking the button you can restore the setting image parameters to the system default value only limited to restore the image parameters Cover in the cover option tag set V thereby active button of the cover regional to confirm to enter cover region setting interface Set cover region In the setting interface of cover region a small yellow box appears in the regional center that is the cover setting box The creation of the region through the panel arrow keys moving the yellow box to the beginning position of the established region press FN key to yellow box switches to the red box each other turn it into a red box red box is the cover region box which takes into force and then press the arrow keys to adjust the size of the region and the minimum can be set to a small square and the maxium can be set up to four cover areas Click the left mouse button or long press left button to move the mouse to select area and after selection you can press ENTERT key or click the middle button of mouse to exit and save ESC key not to s
21. iver which is used to receive remote device commands 2 2 Product Interface Description D 00000060 t nn m m Z Z nn 219 Si k N S8rSa Cl rhuosNas CJ C ssrsu CJ CII ON CJI woo CII ano Oil suosNas V1 V7 video input port which is used to receive the video signal source VIDEO OUT it s used for video AV output which can directly be connected to TV or the Monitor AUDIO OUT Audio output connect Speaker MIC it s used audio signal input such as microphone and the like AUDIO IN it s used audio signal input such as microphone and the like VGA it s used for video VGA output and display connection IO IN it s used for alarm input connections Connect devices such as alarm probe IO OUT it s used for alarm output connections connect devices such as alarm RS485 it s used for the RS485 bus to transceiver devices such as PTZ decoder RJ45 the network port connect the device to the network DC IN Power Interface please use the distribution power connections do not use other power supply othenrwise it might burn equipment Owner s manual 2 3 Remote control description fo Number a Moeu a aa Rowing NS eu Playinawse ee front Iso Remote control mode is the same as the panel Owner s manual DEV button after pressing DEV key according to the number keys enter device number which is agreement with the host press OK button to save the settings
22. key or buttons to exit playback screen at any time after playing all automatically quit the playback screen 3 6 Manual recording Click the manual recording in the main menu column to enter its settings interface Video REC key or in the main menu column use mouse to click Manual recording to directly enter manually setting recording interface Manual video interface description Manual recording interface consists of the following components Channel number it corresponds to the video channel of the device Channel status it indicates video status of the corresponding channel and status lights are green and indicates that no open video red means to open the video Video status when the state lights are surrounded by a coil of and means the correspon ding channel open the network video transmission When the system is in recording state regardless of video type in the lower left corner of the channel preview screen will show S which means the system is recording Owner s manual Full enable disable the button Click the button to stop or open the video settings of all channels Back button Click the back button then exit manual recording interface return to the main menu bar Note Manually start the video only through the manually stopping otherwise the video would continue 3 PTZ control Click PTZ control of in the the main menu column to enter setting interface The
23. m output and only during the effective setting period alarm signal can be exported After the page setup is completed click OK button the setting information is saved and exit click Cancel button he setting information is not saved and exit Owner s manual 3 8 2 6 video deployment In the System Settings interface select Video deployment to enter its settings interface Select channel Select the channel you want to set goals click the select box to select Weeks Select which day you want to set and you can set it separately AT means all dates Video types and time periods during the four time periods you can set different video types during each period timing video red motion detection recording green alarm recording yellow N means enable L means invalid There is time period status displaying below and the overall schedule from 0 to 24 hours Copy to In the select box on the right of Copy To button select the target channel click the Copy to button and the system will apply the current channel setting information to other target video channel After the page setup is completed click OK button the setting information is saved and exit click Cancel button he setting information is not saved and exit 3 8 2 7 Video Detection In the System Settings interface select Video Detection to enter its settings interface 29 30 Owner s manual Channel Type R
24. main operations of PTZ control are directional control horizontal sweep Zoom control adjust the focal length adjust aperture PTZ speed After switching page you can call the preset points start stop automatic cruise wiper control lighting control auxiliary equipment control Description The called preset points must be set up and for the cruising path setting method see 3 8 2 8 PTZ settings in which when the set cruise path number is less than 2 digits you need to add 0 to make up enough numbers before the value of the set corresponding cruise path number 3 8 Menu Click menu in the main menu column to enter the main menu page and one level menu includs management tools system settings log Query shut down the system SUG 7 Fo d Tools Setup Log Shutdown HDD management user management software upgr ade time setting and clear alarm 17 Owner s manual 3 8 1 Management Tools It includs hard disk management user management restore to the default clear the alarm software upgrades time settings version information TONNERRE j PA eg t User Default Clear e Upgr ade Time Format HDD 3 8 1 Hard disk management Capacity Free Format 475 66G 474 63G Formatted Format GANGELE _ SATA It displays hard disk information of the current system o means the success of the hard disk test X indicates means not to detect th
25. munication among the different network segments which needs to set the gateway address DNS address The device uses PPPoE protocol to access network and it will get a dynamic IP address Enable multicast Select whether to enable multicast DHCP Select whether to enable DHCP to automatically obtain IP Http port The port number which IE is browsering to visit and the default port number is 80 When the page setup is completed click OK button and the setting information is saved and exit click Cancel button the setting information is not saved and exit PPPOE configuration In the network configuration interface select the PPPOE Configuration to enter its settings interface 000 UUU 255 255 DO 000 OOO VOU 00 00 33 34 Owner s manual Enable NL means to enable PPPoE to dial up H means not to enable the feature The user name and password In the edit box enter the user name and password which the ISP provides For editing method see 3 3 2 4 edit box When the page setup is completed click OK button the setting information is saved and exit click Cancel button the setting information is not saved and exit DDNS configuration In the network configuration interface select the DDNS Configuration to enter its settings inter face Enable Ar means to enable DDNS Dynamic Domain Name Service O means not to enable the feature Select the corresponding se
26. new user s settings Click Confirm button to set the new user information to save and Cancel means not to save Modify user Enter the User Management interface in the user list click the right mouse button or panel ENTER key to select the target user and then click Modlfy button enter the Modify User page to modify user information Notes admin administrator can modify permissions of other users Delete User Enter the User Management interface in the user list click the right mouse button or panel ENTER key to select the target user click the delete button and after confirmation delete the user 3 8 1 3 Restore Default Restore the system configuration parameters as the factory configuration and after restore the system restarts automatically 3 8 1 4 Clear alarm Manually remove all of the alarm information After the successful removal of alarm the system will give prompt information of has successfully cleared warning Owner s manual Clear HE Te WITT TT Ok After confirmation return to management tools the page 3 8 1 5 Software upgrade In the management tools interface select software upgrade to enter its operation interface y ede lar get Ma i nboar d v Method USR v canoer In the upgrade option box select objectives which need to upgrade in the upgrade option box select the upgrade mode FTP or USB USB Upgrade copy the upgra
27. ng settings 1 The IE settings if the first time you use it and the control does not be loaded you need do settings for IE as follows Internet Options gt safe internet gt Custom Options gt ActiveX controls and plug ins are all chosen to enable and finally Click OK The following figure ag Formanty ActiveX i dodatki plug in Automatyczne monitowanie dla formant w ActiveX Wiacz Wylacz Zmiany beda wprowadzone po ponownym uruchomieniu programu Internet Explorer Resetowanie ustawien niestandardowych Resetuj do Srednio mysoki domyslnie L x Login Open IE and in the address bar enterthe IP address which is set in the host network settings the factory IP address is http 192 168 1 23 enter the login page such as the following picture Enter the user name and login password the user name and password are the same as that of the host side and enter the correct user information then you can successfully login User Name Network Lan w If plugin is not installed automatically please download the package and install it manually 36 Owner s manual 4 1 Video Surveillance Main Page After login monitoring main page consists of preview window PTZ control preview mode stream selection channel open opening the intercom contiguration playback user cancellation form Figure 4 1 2010 08 20 09 17 04 Start VOIP Configure Playbeck Open preview In the preview wind
28. ow click the left mouse button to select the target channel channel which displays as a red box means to be selected and in the open box use mouse to double click the channel number which can open or close video image of the preview window of the corresponding to ESS means to open ESS means close status Preview mode In the preview mode switching box you can through mouse clicking TEE or double click the preview window to switch to a single picture or multiple pictures preview mode 4 2 Bit stream selection The device supports dual stream and in the bit stream select box select a video preview stream type 4 3 PTZ control Direction buttons PTZ direction control button you can press up and down left and right to control the direction of PTZ operation Aparature aperture button you can increase and reduce the control PTZ aperture Focus focal length button you can adjust nearer or farther to control PTZ focus OF 38 Owner s manual Zoom location button you can pull nearer or farther to control the location of PTZ 4 4 Advanced settings box When preview window closes the video preview the feature is activated In the corresponding channel preview window click the right mouse button to open the Advanced Settings box Open Close sound Through the button open or close the audio of previewing the channel Capture Capture the current video screen and save it as image formats For saving the direc
29. re 4 6 1 The setting parameters is the same as that of the host For the setting methods and consi derations please refer to system configuration system information network operating instructions of the host 4 6 2 Channel parameters configuration In the setting interface respectively set the related parameters settings to the host side In Figure 4 6 2 The setting parameters is the same as that of the host For the setting methods and consi derations please refer to image settings video settings PTZ setup instructions of the host 39 Owner s manual 4 6 3 Alarm configuration parameters In the setting interface respectively set the related parameters settings to the host side In Figure 4 6 3 The setting parameters is the same as that of the host For the setting methods and consi derations please refer to alarm input alarm output and setting instructions ofthe host 4 6 4 User configuration information 40 Owner s manual Set the user information of the device and the setting parameters are the same as that of the host For the setting methods and considerations please refer to user management instructions of the host 4 6 5 Others In the setting interface respectively set the related parameters settings to the host side In Figure 4 6 5 The setting parameters is the same as that of the host For the setting methods and consi derations please refer to manual recording date time hard disk m
30. rvice providers and in the edit box enter the user name password and domain name For editing method see 3 3 2 4 edit box When the page setup is completed click OK button the setting information is saved and exit click Cancel button the setting information is not saved and exit 3 9 Log information In the main menu page select Log query to enter its interface Owner s manual Type Duration 2010 08 10 11 28 19 2010 08 13 11 28 19 CECO SREL Info Main types in the selection box select query log types Time setting in the edit box enter the view time period Click the Search Logs button and the corresponding log information will appear at the bottom of the log list You can through in the Page box entering the target page click OK button to curl or scroll the middle mouse button to curl 3 10 Shutdown the system In the main menu interface select shutdown system to enter its interface In the selection box select corresponding operation content Cancel the user It s user to exit the current user After cancelling if you want to continue to use the equipment you need to re login the system Restart Restart the device and after confirmation the device will restart Close system Close the device and after confirmation the device will be closed 35 Owner s manual Chapter 4 Client operation instructions When the PC is using the client you should do the followi
31. tenceccsnadeeddenctntasseadehieesesacandniveiaatsacaasaanducomelentes 38 4 6 2 channel parameters COMNGUPAUON E 39 4 6 3 alarm parameters COMM QUPANON EE 40 4 6 4 USEF ee elteren ie due BE 40 BO EE 41 A F remote DIN OAC Rae a es anne adidas aa Ones ae ste ee en 42 Owner s manual Chapter 1 Product description 1 1 Product overview The equipment is a security surveillance product which is designed specifically for the security field which adopts embedded processor and embedded operating systems combined with latest technologies in the IT field such as video and audio compression decompression high capacity hard disk recording TCP IP network technology and the codes are solidated in the FLASH which makes system run more stable The equipment at the same has the fearture of digital video and audio recorder DVR and digital video and audio server DVS which can not only indepen dently locally but also orm a powerful network of security monitoring through being connected to network it can be used in banks telecommunications power justice transport residence factories warehouses water conservancy facilities and other fields and the safety precautions of each departments 1 2 Technical parameters Operating system Embedded Linux operating system System resources at the same time 4 channel CIF real time video and network transmission 1 or 4 channel CIF playback and 8 channel CIF QCIF sub stream Operation interface
32. tory settings see 4 6 5 Video Capture save directory Video Turn on remote recording of the channel video and save it For saving the directory set tings see 1 5 5 Video Capture save directory PTZ settings It s used to set PTZ preset point the cruise path trajectory settings For setting method see 3 8 2 8 PTZ host side settings OSD setting Set the channel time real location of OSD layer use mouse to drag location to confirm and save Motion detection Set motion detection area firstly H means motion detection area select Add area hold down the left mouse button to drag on the screen then grid like white line appears which is detection area select clear the area in the region of the grid like white lines hold down the left mouse button to drag on the screen then the region of the grid like white lines disappe ars and the motion detection area is cancelled In the sensitivity and output delay box select the corresponding parameters Screen adjustment Set the image brightness contrast hue saturation and click the left mouse button or drag to adjust when exiting it is automatically saved 4 5 Intercom control Click to open the Voice to initiately perform voice intercom This version doesn t temporarily support voice intercom 4 6 Configuration 4 6 1 Server parameter configuration Owner s manual In the setting interface respectively set the related parameters settings to the host side In Figu
33. turn to the previous menu level 3 5 3 Playback tool control When selecting the file playback or playback by time it will enter the video playback interface d RNAI i GR A 3 Playback toolbar In the bottom of playback interface playback toolbar will appear and you can click the right mouse button to hide show toolbar When at the same time Multi screen is being playback after hiding tool bar you may by clicking the left mouse button zoon in or out correspon ding channel video Stop Play Click K3 button the system will stop playing and exit the playback interface Pause Play Click W button to pause playback click KS to continue to video playback Single frame playback when it is pause mode click amp it will be single frame playback and each time click to forward play one Slow play Click to slow play click again to set the slow play multiples Quick play Click to quick play click again to carry out quick play multiple settings Previous paragraph next paragraph Click amp or button every time click once of a time or the next section playback progress will forward or backward progress 10 15 16 Owner s manual Close Open Sound click amp or amp can open or close the sound of playback files Playback status information on the right playback tool bar respectively show playback speed play progress the played time total time of video file Exit Play Click ESC
Download Pdf Manuals
Related Search