OPERATING INSTRUCTIONS PANEL HEATER
Contents
1. PANEL HEATER OPERATING INSTRUCTIONS For Models CELEPANEL CELEPANELT WARNINGS AND SAFEGUARDS 4 2 Use only the voltage specified on the rating label of the appliance Keep all objects at least 1 metre from the front and sides of the appliance Do not place appliance close to radiant heat source Do not operate in areas where petrol paint or other flammable liquids are used or stored Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock fire or damage to the appliance Do not sit on the appliance Do not operate this appliance with a damaged cord plug or after the appliance malfunctions or has been dropped or damaged in any manner Return to a qualified electrical person for examination electrical service or repair This appliance is intended for household use only and not for commercial or industrial use Use this appliance only as described in this manual Any other use is not recommended by the manufacturer and may cause fire electrical shock or injury The common cause of overheating is deposits of dust or fluff in the appliance Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills Do not use abrasive cleaning products on this appliance Clean with a damp cloth not wet rinsed in hot soapy water only Always remove plug from the mains supply before cleaning Do not connect th2. the correct drill bit for the wall surface material you are mounting on to Please contact your local hardware retailer or builder for advice WALL MOUNTING INSTRUCTIONS Always choose a safe location for the heater keeping in mind the safety precautions outlined Ensure all packaging and the wall mounting accessories pack has been removed from the unit before use 1 D AA VIN Mark the positions of the four holes to be drilled on the wall Ensure there is a 300mm clearance on all sides of the heater Drill holes with an appropriate drill bit for the wall type you are mounting the heater on to Insert the plastic rail fittings into the holes Install the panel heater onto the four rail fittings matching the four holes on the heater Screw the four screw bolts into the plastic rail fittings Put the caps onto the end of the screw bolts It is recommended to use some normal glue to stick the caps onto the bolts To remove the unit from the wall simply remove the bolt caps unscrew the bolts with a screw driver and take the heater down OVERVIEW OF YOUR CELSIUS PANEL HEATER Your Celsius Panel Heater will provide background warmth Your Panel Heater is designed to take the chill off the room The surface of this Panel Heater can be painted with good quality paint acrylic or enamel Decorating tip All wall mounted heaters may cause paint to discolour or wall paper to lift OPERATING YOUR HEATER Always choose a safe location for
3. e appliance to mains supply until completely assembled and adjusted Switch off when moving Do not operate with cord set coiled up as a heat build up is likely which could be sufficient to become a hazard Do not use an extension cord power board or external timer with this appliance Do not remove plug from power socket until the appliance has been switched off Do not remove plug from power socket by pulling cord always grip plug 16 17 20 21 22 23 24 25 26 27 Always unplug appliance when not in use Do not locate the heater directly below any power socket during operation Do not twist kink or wrap the cord around the appliance as this may cause the insulation to weaken and split Always ensure that all cord has been removed from any cord storage area and is unrolled before use This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they are supervised or have been given instruction concerning the use of the appliance by a person responsible for their safety Do not use this appliance in the immediate surrounds of a bath a shower or a swimming pool or other liquids The appliance must not be immersed in any liquids When the appliance has been unpacked check it for transport damage and ensure all parts have been delivered If parts are m
4. issing or the appliance has been damaged contact the Celsius Customer Services Team If your appliance does not work or is not working properly contact the place of purchase or the Celsius Customer Services Team Repair work on the appliance by unqualified persons can cause serious risk to the user There are no user serviceable parts installed in the unit Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards This unit is not supposed to be used in or around locations where foodstuffs works of art or delicate articles of science etc are stored Indoor use only Children should be supervised to ensure that they do not play with the appliance SUPPORT AND TECHNICAL ADVICE Celsius New Zealand Monday Friday 8am 5pm Phone 64 0 9 917 4000 Phone 0800 232 633 info celsius co nz Celsius Australia Monday Friday 8am 5pm Phone 61 0 3 9336 4423 Phone 1300 465 324 info celsius co nz WALL MOUNTING POSITION INSTRUCTIONS NOTE Your Celsius panel heater should be installed with at least 300mm clearance from the floor and any other surrounding parts including other appliances side walls ceilings shelves and soft furnishings CONTENTS 1 x Celsius panel heater 1 x Wall mounting accessories pack 2 X Drill bits 1 x 7mm for plasterboard or wooden walls 1 x 8mm for drilling masonry 4 x Rail fittings 4 x Screw bolts 4 x Bolt caps NOTE Please ensure you use
5. oods or services to which this warranty relates In Australia our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act 1993 Celsius New Zealand Celsius Australia PO Box 100 707 PO Box 574 N S M C South Morang Auckland Victoria 3752 Phone 64 0 9 917 4000 Phone 61 0 3 9336 4423 Phone 0800 232 633 Phone 1300 465 324 info celsius co nz info celsius co nz Celsius Two Year Warranty IMPORTANT Please complete and retain this warranty card Name Address Place Of Purchase Date Of Purchase Name Of Product Model Number Attach a copy of the purchase receipt to this warranty card Due to continual design improvements the product illustrated in this User Manual may differ slightly from the actual product
6. r represents 15 minutes Where all the riders are pushed to the outside of the timer the heater will be ON continuously To set a specific time for example If you want the heater to be on from 6pm to 10pm then set all the riders from 18 to 22 1800 hours to 2200 hours to the outside of the rim and all other riders to the inside of the timer The unit will then turn on automatically at 60m and off again at 10pm WARNING Take care in positioning your heater using the timer will mean the heater will come on automatically Fire may result if placed next to combustible material Riders pushed to the outside rim to turn ON Indicates actual time Two Year Warranty Thank you for purchasing this Celsius product Your product is warranted against faults and manufacture when used in normal domestic use for a period of two years In non domestic use Celsius limits the voluntary warranty to three months Celsius undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period This warranty excludes damage caused by misuse neglect shipping accident incorrect installation or work carried out by anyone other than a qualified electrical service technician PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY The benefits to you given by this warranty are in addition to other rights and remedies available to you under a law in relation to the g
7. t will turn the heater off however the light in the power switch will remain on to let you know there is still power going into the heater In the event that this happens turn the heater off at the switch and the wall socket and unplug it Then contact our Customer Service Team WARNING Do not use this heater with a separate programmer remote control system separate timer or any other device that switches the heater on automatically since a fire risk exists if the heater is covered or positioned incorrectly WARNING Keep all objects at least 1 metre from the front and sides of the appliance CAUTION The heater generates heat during use Proper precautions must be taken to prevent the risk of burns scalds fires or other damage to persons IMPORTANT NEVER COVER THIS HEATER PROOF OF PURCHASE TECHNICAL SPECIFICATION To receive warranty retain receipt as proof of Model No CELEPANEL CELEPANELT purchase Refer to back of booklet Supply 220 240VAC 50Hz Wattage 400 425W PLEASE NOTE As the CELEPANELT model is fitted with a timer the timer has been set to the ON position SETTING THE TIMER Turn the outer dial of the timer in a clockwise direction until the time of the day 24 hour clock corresponds with the triangular marking Example if it is 20m 1400 hours then set the triangular mark in line with 14 One complete turn of the dial corresponds to 24 hours There are 96 riders positioned around the dial each ride
8. the heater keeping in mind the safety precautions outlined Ensure all packaging has been removed from the unit before use OPERATING INSTRUCTIONS 1 Before plugging in and using your new Celsius Panel Heater check all surfaces to ensure the heater is not damaged in any way 2 Check that the On Off switch is set to the Off position before plugging the heater into the mains supply 3 Use the On Off switch along the side of the heater to turn your heater on GARE AND CLEANING Do not attempt to dismantle the panel heater There are no user serviceable parts For service or repair contact an authorised electrical service technician Unplug the heater from the mains supply before cleaning Ensure that the heater has been allowed to cool down completely before cleaning To remove the unit from the wall simply remove the bolt caps unscrew the bolts with a screw driver and then take the heater down Use a vacuum cleaner to remove dust and fluff from behind the heater The outside can be cleaned by wiping it over with a soft dry cloth NOTE Do not use abrasive cleaning agents or polish this can damage the surface and finish For short term non use simply turn off the unit with the power switch on the side of the heater and disconnect the mains power supply at the wall SAFETY FEATURE In case of overheating this heater is fitted with a thermal fuse which is located inside the construction of the heater If this thermal fuse activates i
Download Pdf Manuals
Related Search