Home

BY Paul Mahle ISBN 09759992-0-6 Mahler, P.S. Asterisk and IP

1. Asterisk is an open source project Don t just go to the user forums for help Share your experiences there and give others a helping hand The telephone system is the life s blood of any enterprise Nothing you can do will upset your users more than interrupting their telephone service To survive you must plan ahead and execute well Yo must be responsive to the continuing needs and desires of your users If you implement your system correctly you can have happy users There are many happy users of Asterisk systems If you do your job right your users will be happy Asterisk will run well with any stable Linux distribution The bootable CD downloadable from www mepis org contains the Mepis distribution of Debian Linux The Mepis distribution is pre configured to make it easy to install Linux and Asterisk You may choose to use a different distribution of Linux than Mepis There are many excellent references available if you need to learn how to install or manage any Linux distribution including Debian versions Booting from the Mepis CD on a PC provides immediate access to a working Linux system Linux will boot and run from the CD without installing anything You can run Linux from the included CD or you can permanently install Mepis Linux to a hard drive This book and this chapter assume that you are familiar with Linux administration and network administration If you have never used Linux before becoming proficient with
2. 4200 gt 9855 Mark Spencer markster linux support net mypager digium com attach no serveremail myaddy digium com tz central other 400 gt 4008 Firstname Lastname Note that the location of saved messages depends on the voicemail context The base directory for voicemail is specified inasterisk conf var spool asterisk voicemail YourVoicemailContext 210 INB Here is an outline of the commands available with VoicemailMain Read voicemail messages Advanced options Reply Call back 1 Envelope Outgoing call 1 Repeat current message Play next message Delete current message Forward message to another mailbox Save message in a folder Help during msg playback Rewind Exit during mkip forward Change folders Mailbox options Record your unavailable message Record your busy message Record your name Change your password Return to the main menu Hel PB WHF ONF FO DAH a uU nH WE After an incoming message busy message unavailable message greeting or name has been recorded the following commands are available Accept Revie Re recor Reach operator 1 not available when recording greetings name OWN F l During the playback of a voicemail message press to fast forward or to rewind The setting of skipms determines the length of the skip in milliseconds This is set in voicemail conf and defaults to 3000 ms The following commands in the dial plan will allow a user to type
3. exten exten exten gt 6003 1 Dial ZAP 28 20 exten gt 6003 2 VoiceMail2 u6003 exten gt 6003 3 Hangup gt 6003 102 VoiceMail2 b6003 gt 6003 103 Hangup exten exten exten gt 8500 1 VoiceMailMain2 exten gt 8500 2 Hangup local inclu gt from sip This dial plan sets up extension 500 in the from sip context to dial Digium technical support over IAX These calls to Digium would require anInternet connection The last entries in the from sip context provide support for a Digium four port FXS card This card would be configured inzapata conf with an entry similar to signalling fxo_k context from si channel gt 1 4 Note that the zapata conf entry indicates the context from sip for calls from this interface This now makesfrom sip a poor choice for the name of the context A name like main would be better This configuration assumes that you will provide voice mail for each of the two telephones Here is an example ofvoicemail conf for the two users general Default formats for writingVoicemail format g723sf wav49 wa format wav49 gsm wa Who the e mail notification should appear to come fro serveremail asteris serveremailasterisk linux support net Should the email contain the voicemail as an attachmen attach ye Maximum length of a voicemail messag maxmessage 18 Maximum length of greeting maxgreet 6 How many miliseconds to skip forward back when rew ff in messag
4. BY Paul Mahle ISBN 09759992 0 6 Mahler P S Asterisk and IP Telephony Paul Mahle Copyright 2003 2004 by Signate LLC All rights reserved No part of this book may be reproduced in any form or by any means without permission in writing from the publisher Printed in the United States of America 20 1918 17 161514131211 This book is a beginner s guide to Asterisk and VolP This book is a road map to your first successful installation of an Asterisk telephone system The path you need to take is documented step by step The information you need is all here in a single place This is not a beginner s guide to Linux in that assume you already are a skilled Linux and network administrator However you do not need grea expertise in telephony or IP telephony to benefit from this book Asterisk software turns an inexpensive PC architecture server running Linux or Unix into a reliable sophisticated full featured enterprise telephone system Because Asterisk is free and runs on an industry standard PC platform an Asterisk system will cost you far less than any traditional proprietar PBX With Asterisk you can quickly and easily build a sophisticated business telephone system for any enterprise no matter how large or small Because it is reliable free and effective and because it i based on moderninternet protocols Asterisk will replace many legacy telephone systems in the marketplace Asterisk is far less expensive and much more effec
5. Communications between different LATAsS Interexchange Carrier A company that provides long distance telephone services between LECs and LATAs Interexchange IXC Service The portion of a Channel or Circuit between a Company designated Point of Presence in one exchange and a Company designated Point of Presence in another exchange InterLata Communications between Local Access Transport Areas Internet With a small i as in internet a network connecting differing subnets With a capital I as in Internet the global Internet connecting all publicly accessible internets Internet Service Provider A company that provides Internet access to its customers Internet Telephony Service Provider A company that provides customers with the ability to place telephone calls over thelInternet Interstate Between states IntrasInterruption A condition that arises when service or a portion thereof is inoperativetate within a single state ISDN See Integrated Services Digital Network ISTP Individually Sheilded Twisted Pair Kb With a small b kilo bits With a large B kilo Bytes Kbs Kilo bits per second IVR See Interactive Voice Response system IXC See Interexchange Carrier Kewlstart Loop Start with far end disconnection supervision This allows the local device to detect when the remote device hangs up LATA See Local Access Transport Area Latency The time between the transmission a
6. For example to receive calls you must first configure the channel that the call will come in on You must then modifyextensions conf to process the incoming calls You might then wish to modify voicemail conf to provide voicemail for unanswered incoming calls If you want to receive calls from an IAX channel you must change ax conf Here is a sample IAX configuration The following entry in iax conf will register your Asterisk server with the IAX server that will be sending the calls Changing ax conf to include the following entry will register with the remote server found atiax url com register gt user passwd iax url com The registration informs the remote server of the location of your Asterisk server This is how the remote server knows how to send calls to your Asterisk server Next you must configure extensions conf so that the dial plan will correctly process incoming calls That is you must modify extensions conf to process calls that arrive on the IAX channel The following entry inextensions conf could process calls coming from ax url com Don t worry about what this example does exactly that will be covered in the later chapter on dial plan configuration iax incoming This context tells Asterisk what to do wit incoming calls from the IAX channe 7 You should hear a congratulations recording on incoming calls exten gt _NXXNXXXXXX 1 Playback demo congrats exten gt h 1 zangup exten gt i 1 Hangup
7. MCU Terminals often called endpoints provide point to point and multipoint conferencing for audio video and data Gateways can interconnect to thePSTN or ISDN networks Gateways are used to connect between a Switched Circuit Network SCN endpoints and H 323 endpoints Gateways are only needed when an H 323 endpoint needs to interconnect to a different network Gateways provide address translation services and admission control Gateways translate between audio video and data transmission formats Gateways interconnect communication systems and protocols A gatekeeper provides pre call and call level control services to H 323 endpoints H 323 gatekeepers are separated logically from the other network elements Inter gateway communications isn t currentl specified by H 323 A gatekeeper can provide call control signalling call authorization bandwidt management and call management functions A multipoint controller MC supports conferencing between three or more endpoints A multipoint processor MP receives audio video and data streams and then redistributes those streams to the endpoints in a multipoint conference An MCU is an endpoint that supports multipoint conferences An MCU must include at least an MC and one or more MPs A typical MCU for centralized multipoint conferences includes an MC a audio MP a video MP and a data MP An H 323 proxy server operates at the application layer It examines packets sent between t
8. The military has systems that operate at six and eight times the DS1 rate At least one commercial system operates at 90 Mb s twice the DS3 rate Note 3 Tlic T 2 and T 4 are rarely used Tl lines are in common use today in for connections to the Internet The T 3 line providing 44 736 mbps is commonly used between Internet service providers Integrated Services Data Network ISDN was standardized in the 1980s ISDN is an international standard interface protocol from The International Telecommunications Union ITU T formerly th CCITT providing single access to multiple services ISDN Signaling is SS7 compatible ISDN subscribers can access SS 7 network services and intelligence through ISDN ISDN provides a variety of communications services in circuit Switched networks These include bearer services for speech 3 1 kHz audio for modems and 64 kbps digital data Teleservice support fa and telex Supplementary services include calling line identification caller ID user to user signalling call waiting and call hold among others ISDN provides D and B channels Bearer B channels are bi directional 64 kbs channels that carry user information B channels do not carry signalling information Bi directional 9 6 kbs Data D channels carry signalling information When someone talks about an ISDN connection they are usually referring to a Basic Rate Interface A BRI provides two 64K bearer DSO channels and a
9. To escapel use a double back slash I Variable names are arbitrary strings To set a variable to a particular value exten gt 1 2 SetVar varname value To substitute the value of a variable use variablename For example to stringwise append lala to blabla and store result in koko exten gt 1 2 SetVar koko S blabla lala The following are special reserved identifiers CALLERID Caller ID CALLERIDNAME Caller ID Name only CALLERIDNUMCaller ID Number only EXTEN Current extensio CONTEXT Current contex PRIORITY Current priorit CHANNEL Current channel nam ENV VAR Environmental variable VA LEN VAR String length of VAR integer EPOCH Current unix style epoc DATETIME Current date time in the format YYYY MM DD_HH MM S TIMESTAMP Current date time in the format YYYYMMDD HHMMS UNIQUEID Current call unique identifie DNID Dialed Number Identifie RDNIS RedirectedDial Number ID Service HANGUPCAUSE Hangup cause on lastPRI hangup ACCOUNTCODE Account code if specified SIPDOMAIN SIP destination domain of an inbound call if appropriate wm 2 2 MM 7 1h WH i mm 1 4m th 7 1 I In References can be by value or by name To refer to a variable by its name for example as an argument to a function that requires a variable just write the name To refer to a variable value enclose it insid f For example SetVar takes a variable name as the first argument before the equals sign ext
10. _NXXXXXX 1 Dial PRITRUNK1 650 EXTEN 0 exten gt _NXXXXXX 2 Congestion exten gt _NXXXXXX 102 Busy Here is a sample dial plan for long distance calling ltru u ktid ignorep gt 9 7exten gt _91NXXNXXXXXX 1 Dial PRITRUNK1 EXTEN 1 jexten gt _91NXXNXXXXXX 2 Congestion jexten gt _91NXXNXXXXXX 102 Busy exten gt _1NXXNXXXXXX 1 Dial PRITRUNK1 EXTEN 0 exten gt _1NXXNXXXXXX 2 Congestion exten gt _1INXXNXXXXXX 102 Busy Here is a sample for toll free calling trunktollfree ext gt _91800NXXXXXX 1 Dial PRITRUNK1 EXTEN 2 exten gt _91800NXXXXXX 2 Congestion exten gt _91800NXXXXXX 102 Busy exten gt _91888NXXXXXX 1 Dial PRITRUNK1 EXTEN 2 exten gt _91888NXXXXXX 2 Congestion exten gt _91888NXXXXXX 102 Busy exten gt _91877NXXXXXX 1 Dial PRITRUNK1 EXTEN 2 exten gt _91877NXXXXXX 2 Congestion gt gt gt pae exten _91877NXXXXXX 102 Busy exten _91866NXXXXXX 1 Dial PRITRUNK1 EXTEN 2 exten _91866NXXXXXX 2 Congestion exten gt _1800NXXXXXX 1 Dial PRITRUNK1 EXTEN 1 exten gt _1800NXXXXXX 2 Congestion exten gt _1800NXXXXXX 102 Busy exten gt _1888NXXXXXX 1 Dial PRITRUNK1 EXTEN 1 exten gt _1888NXXXXXX 2 Congestion exten gt _1888NXXXXXX 102 Busy exten gt _1877NXXXXXX 1 Dial PRITRUNK1 EXTEN 1 exten gt _1877NXXXXXX 2 Congestion exten gt _1877NXXX
11. conferences MeetMe mgcp conf MGCP channels modem conf ISDN and Modem connections modules conf Asterisk module loading musiconhold conf the MusicOnHold command parking conf call parking queues conf call queues rtp conf RTP ports for media Sip conf SIP channels voicemail conf voicemailboxes zapata conf digium interface cards Figure 06 1 Configuration Files Asterisk configuration files are flat ASCII files A semicolon starts a comment Anything from the semicolon to the end of the line is treated as a comment and not acted upon For example CONSOLE Console dsp This is a comment CONSOLE Zap The sign is used to indicate extensions and is thus not used for comments A configuration file includes multiple lines There is no continuation between lines Configuration files are divided into Sections Sections group lines of similar purpose Sections are named with a string inside square brackets The string can contain letters numerals and the underscore character For example general Variables are assigned values with the equals sign myvar myvalu Variables set within a globals section are available from anywhere within the configuration file Here are some examples globals CONSOLE Console dsp Console interface for dem CONSOLE Zap CONSOLE Phone phone IAXINFO guest AXtel username passwor IAXINFO myuser mypas TRUNK Zap g2 Trunk interface TRUNKMSD 1 Most
12. dial 12394 on first available channel on groupl Zap g1 WW12394 Wait 1 second before dialing 1239 on first available channel on group Zap 1 1 12394 dial 12394 on span 1 port Zap 1 12394 dial 12394 on port Note that the special dial modifier c allows for clear channel connections between PRI ports Adding W to the number adds a 0 5 second pause This causes a wait for dial tone before sending digits You could keep your user list in an SQL database Look at the code in the chan_iax2 c source file for further information You can change the ringing on zap channels Here is an example Dial Zap 3r2 r The first r2 is an option to the Zaptel channel driver telling it that you want distinctive ring 2 while the second r indicates to dial that you want ringing to be immediately indicated to the caller The available distinctive ringing choices are Quick chirp followed by normal rin British style rin Three short burst Long rin Bm WN FP When using a dial group the dial command finds one of the group that is not busy and dials it To ring multiple phones extensions simultaneously each extension must be included in the dial comman and separated with an ampersand amp This example will dial the SIP phone at 192 168 50 188 and the ZAP phone at the same time exten gt 353 1 Dial SIP 192 168 50 188 amp Zap 10 18 This example uses two Asterisk features Caller ID matching and simultaneous calling on multiple
13. gic r numberical indentifier for the physical channel number of the selected channel g the identifier is a group number instead of a channel Seezapata conf c request answer confirmation A number is not consdered answere until the called party presses e distinctive rin cadence an integer between one and four Zap 1 TDM Channel Zap gl First available channel in group Zap 3r2 TDM Channel 3 with 2nd distinctive rin Zap g2c First available channel in group 2 with confirmatio Zap the channel number a number from 1 to 3 Indicates the logical channel associated with a single physical channel Zap 1 1 First call appearance on TDM channel Zap 3 2 Second call appearance on TDM channel In zaptel conf T1 E1 interfaces take several values and have the format span spannum timing LBO framing coding The values for each of these arguments depends on the configuration of the equipment at the far end of the T1 or E1 line Timing defines how timing is synchronized between the devices 0 don t use this span as a sync source 1 primary sync sourc 2 secondary sync source etc The line build out or LBO is an integer from the following table 0 0 db CSU 0 133 feet DSX 1 1 133 266 feet DSX 1 2 266 399 feet DSX 1 3 399 533 feet DSX 1 4 533 655 feet DSX 1 52 7 50b CSU 6 lodb CSU pi 22 5db CSU The choices for framing are one of d
14. help you maintain the quality of service for your telephon calls Sending voice over the PSTN is expensive compared to sending voice as data over the Internet Unlike anInternet connection PSTN channels aren t shared There are a variety of ways to connect to the Internet The following table compares some of them Some connections are symmetrical that is they are just as fast in both directions Some connections like a satellite connection are much faster in one direction for example down from the satellite to you TABLE 03 1 Connection Name Relative Speed Connection type Speed Monthly Cost Simultaneous Calls Modem iL telephone 56 kbps 40 one maybe Satellite 1 up 5 down radio 56 kbps up SL 7S one maybe 512 kbps dow ISDN 2 telephone 128 kbps 4 cents per minute two DSL 2 4 up telephone LAS ojos mlsjeys 30 to 300 two 4 10 down Cable Modem 2 4 up broadband cable L28Mps or more up 45 one maybe to 6 mbps down 5 48 down i 25 telephone wire L 544 mbps 450 up depending on 23 to 40 distance T3 625 Telephone wire 44 736 mbps A A C i 2 500 A 155 5 Mpbs A A Most small businesses will do well with a T1 line or a business grade DSL line The time delay of a satellite link makes them impractical for most business settings The inexpensive satellite links are ver low bandwidth up to the satellite The higher speed satellite links are very expensive The asymmetrical speed of a cable modem makes them impractical
15. that could appear in sip conf In the first example the user id is 1835 and the secret is 12345 register gt 1835 12345 inoc dba pch net 1835 regist gt 8776 ka6vep iptel org 8776 The first registration provides inoc dba pch net with the destination for calls to extension 1835 The second registration registers wit pte org incoming calls will be referred to extension 8776 If you are using SIP phones you must first configure the SIP phones then you must configure Asterisk to operate with those phones Configuring asterisk requires configuringSIP and then configuring the dial plan in extensions conf The SIP configuration file for a phone is often a configuration file that is downloaded to the telephone often with tftp This configuration of the phone is done outside of Asterisk Asterisk itself does not send aSIP configuration file to a telephone Typically a server like TFTP is used to send the configuration file to the SIP phone Several configuration files must be modified to use a SIP telephone with Asterisk As shown in the following figure the information in each of the configuration files must be in agreement Telephone 4035 SIP Configuration Asterisk 4035 SIP Configuration sip conf Asterisk Asterisk 4035 Dial Plan extensions conf Figure 07 1 SIP Phone Configuration The SIP configuration for a phone must assign a numeric extension identifier for each line of the teleph
16. the you can answer it by picking up and dialing 8 For simple offices jus make these both the sam callgroup pickupgroup i Specify whether the channel should be answered immediately or if the simplitch should provide dialtone read digits etc immediate n CallerID can be set to asreceived or a specific number if you want to override it Note that asreceived only applies to trunk interfaces callerid 256428600 AMA flags affects the recording of Call Detail Records If specifie it may be default omit billing or documentation amaflags defaul Channels may be associated with an account code to eas j pillin accountcode lss010 ADSI Analog Display Services Interface can be enabled on a per channe 7 basis if you have or may have ADSI compatible CPE equipmen adsi ye On trunk interfaces FXS and E amp M interfaces E amp M Wink Feature Group etc it can be useful to perform busy detection either in an effort t detect hangup or for detecting busie busydetect ye On trunk interfaces FXS it can be useful to attempt to follow the progres Of a call through RINGING BUSY and ANSWERING If turned on cal progress attempts to determine answer busy and ringing on phon lines This feature is HIGHLY EXPERIMENTAL and can easily detect fals answers 7 so don t count on it being very accurate Also it is ONLY configure fo Standard U S tones This feature can
17. then Dial will jump to 101 current priority which in our case will be 101 1 102 This 101 jump is buil into Asterisk and does not need to be defined exten gt 4035 102 Voicemail2 b4035 exten gt 4035 103 Hangup f Now what if the number dialed w 4009 exten gt 4009 1 Dial SIP 4009 20 exten gt 4009 2 Voicemail2 u4009 exten gt 4009 102 Voicemail2 b4009 exten gt 4009 103 Hangup Define a way so that users can dial a number to reach voicemail Call the VoicemailMain application with the number of the caller already passed as a variable so all the user needs to do is type in the password gt 4040 1 VoicemailMain CALLERIDNUM Tech Support at Digium exte gt 500 1 Dial IAX2 guest misery digium com 6161 default Call the Asterisk dem exten gt 500 2 Playback demo nogo Couldn t connect to the demo Sic exten gt 500 3 Goto s 6 Return to the start over message Four Lines foFXS board exten gt 6000 1 Dial ZAP 25 20 exten gt 6000 2 VoiceMail2 u6000 exten gt 6000 3 Hangup gt 6000 102 VoiceMail2 b6000 gt 6000 103 Hangup exten exten exten gt 6001 1 Dial ZAP 26 20 exten gt 6001 2 VoiceMail2 u6001 exten gt 6001 3 Hangup gt 6001 102 VoiceMail2 b6001 gt 6001 103 Hangup exten exten exten gt 6002 1 Dial ZAP 27 20 gt 6002 2 VoiceMail2 u6002 exten gt 6002 3 Hangup exten gt 6002 102 VoiceMail2 b6002 gt 6002 103 Hangup
18. you can share a T1 connection to your home You can connect your neighbors t your T1 line with wireless equipment and share the cost Note that there are security concerns surrounding a shared connection You will need the appropriate hardware and software to share a connection safely This subject is beyond the scope of this book If you are located close to a larger number of other businesses you could even share a larger connection like a T 3 A T 3 is 28 times bigger than a T1 but it isn t 28 times more expensive A T 3 is usuall inexpensive compared to 28 T1 lines Various types of equipment are available to help you insure that no one user takes more than their share of the line There are a few circumstances where you won t need to get a local loop from your local telephone company If other companies have run wire or fiber optic cables into your neighborhood you may not need your local telephone company If your VoIP system is in a remote hosted facility a company like AT amp T or Sprint may have a high speed fiber optic connection into the facility You may be able to connect to this circuit with a T1 lin and not need a local loop from your telephone company DSL Digital Subscriber Line can give you just as fat a pipe to the Internet as a T1 line DSL usually doesn t have an SLA This means if yourDSL line goes down you might have to wait a long time for it to be fixed A DSL line might be an excellent backup for when your
19. 17 00 mon fri The following figure shows two contexts named Sales and Support _Context Sales __Context Support Extension Description Extension Description Figure 06 2 Contexts Sales and Support One context can include another context In the next figure the Dial Out context includes the Sales context This permits the extensions in the Sales context to dial out This prevents the extensions i the Support context from dialing out The inclusion of one context in another can be restricted by dat and time For example the Sales context could be included in theDial Out context only during business hours This would prevent anyone with an extension in the Sales context from dialing out after hours or on weekends Extension contexts can help manage the security of an Asterisk installation Access to services or interfaces can be restricted to an extension context or by date and time This is described further in the later sections on Asterisk security ___Context Dial Out ___Extension Description of Outside Line rr E Context Sales n _ Context Support _Extension Description a Figure 06 3 Contexts Including An extension can link to a context In the following figure a new context named Main is added to the last example Extension 100 in the Main context links to the Sales context In this example incomin calls would be directed to the Main context This would allow someone dialing in to press 100 and b
20. 5 l l 100 tying l l Response a ENUM query lt 4 NAPTR record l I aP l l l l I l l l 6 Figure 16 6 SIP Address Resolution SIP support of telephone number addressing and Web addressing supports bridging between the two networks If aSIP endpoint knows the URL of another SIP endpoint direct communications is possible SIP address resolution starts with a URI that resolves toa username at an IP address The figure above shows a sequence diagram for a typical address resolution sequence where a URI is resolved to a user a an IP address Session Setup is the primary function of SIP SIP sends an invite request The invite request can contain a message describing the desired session type The following sequence diagram shows a typical session setup Sip User Agent Sip User Agent Invite 100 Trying 180 Ringing 200 OK ACK Media Session Figure 16 7 SIP Session Setup This has been a fast introduction to a very complex topic For more information please consult one of the excellent references Note see the excellent and more comprehensive references at http www its bldrdoc gov fs 1037 A http isp webopedia com Abandoned Call A call that is disconnected after a connection has been made to the called telephone but before the call is established Abbreviated Dialing A method of allowing a user to dial a
21. Executes an AGI compliant applicatio EnumLookup Lookup number in ENU Goto Goto a particular priority extension or contex GotoIf Conditional got GotoIfTime Conditional goto on current tim Macro Macro Implementatio NoOp No operatio Prefix Prepend leading digits Obsolete Random Make a random jump in your dial pla Read Read a variable with DTM ResponseTimeout Set maximum timeout awaiting respons SetGlobalVar Set variable to valu SetVar Set variable to valu StraiphsSbD Strip trailing digit StripMSD Strip leading digits Obsolete SubString Save substring digits in a given variable Obsolete Suffix Append trailing digits Obsolete Sounds background musiconhold et BackGround Play a file while awaiting extensio DateTime Say the date and tim Echo Echo audio read back to the use Festival Say text to the use Milliwatt Generate a Constant 1000Hz tone at Odbm mu law Monitor Monitor a channe MP3Player Play an MP3 file or strea MusicOnHold Play Music On Hold indefinitel Playback Play a fil Playtones Play a tone lis Record Record to a fil SayDigits Say Digit SayNumber Say Numbe SayUnixTime Say Time in a number of format SetLanguage Sets user languag SetMusicOnHold Set default Music On Hold clas StopMonitor Stop monitoring a channe StopPlaytones Stop playing a tone lis SIP commands SIPdtmfMode Change DIMF mode duringSIP call ChanIsAvail Check if channel is availabl F
22. Linux before installin and running Asterisk is a large undertaking While it s possible it could take a great deal of time Network administration has a substantial learning curve Asterisk was built for the Linux operating system Some work has been done to port Asterisk to other operating systems like BSD The path of least resistance and greatest reliability is to install Mepis an Asterisk This chapter shows you how to install Linux and Asterisk on your PC The required steps are Install and configure Linux Install and configure telephony related hardware Download and compile asterisk Configure asterisk After you have installed Asterisk you will have to configure any adaptors for example T1 adaptors that you have installed This is described in separate chapters After you have installed Asterisk and configured any adaptors you will need to configure Asterisk for your environment A later chapter describes Asterisk configuration This chapter assumes that your Asterisk server is connected to the Internet at least while you are installing and configuring Asterisk AnInternet connection is required for downloading Asterisk Information in this chapter concerning DHCP TFTP and NTP configuration should be noted when installing any version of Linux or Unix Linux and Asterisk are both efficient consumers of computing resources Simple hardware will usually run Asterisk well For example an Asterisk system for a small office with
23. No further redirection is allowed That is an IAX client cannot connect to an IAX server through another IAX server The IAX client calls the IAX server with a dial command in extensions conf This syntax is used for an IAX connection within a dial command in the client dial plan IAX 1 1 user UserID on remote peer or name of client configured in iax conf secret Password peer Name of server to connect to portno Port number for connection on server exten Extension in the remote Asterisk server context Context to use in the remote Asteriskserver options Only a is def request autoanswer IAX iaxphone s This example above callsiaxphone and requests an immediate answer The next example calls Digium TAXguest misery digium com This next example makes a call to myserver using mark as username and asdf as password This example connects to extension6275 in the default context IAX mark asdf myserver 6275 defaul If you are going to reference an IAX connection in multiple places you may wish to create a global for the connection string Please see theiax conf example file for further information about IAX usage Inter Asterisk eXchange trunk mode eliminates the IP overhead of individual VoIP IP streams by pipeliningRTP data from multiple calls into single larger packets This removes the redundancy of IP overhead for eachRTP stream This supports better bandwidth scaling This mode
24. Sample DHCP configuration file for Asteris The ddns updates style parameter controls whether or no the server will attempt to do aDNS update when a lease is confirmed We default to the behavior of the version 2 package none since DHCP v2 didn t have support for DDNS ddns update style none option routers192 168 0 1 default gateway option domain name dnsdomain net option domain name servers206 13 28 12 206 13 31 12 option ntp serverstime windows com option tftp server name 192 168 0 12 default lease time 600 max lease time 7200 If this DHCP server is the official DHCP server for the loca network the authoritative directive should be uncommented authoritative subnet 192 168 0 0 netmask 255 255 255 0 rangel 92 168 0 50 192 166 0150 Consult the Cisco supplied documentation for more information about manual network configuration Briefly to configure the network settings for the phone unlock the phone as shown in the following section If the phone is runningSIP version 4 2 or newer you will need a password The default password is cisco Press the Settings button Press the down arrow to select Network Configuration and then press the Select soft key Look at the upper right portion of your LCD there should be a unlocked padlock icon Modify parameters with the toggle button and the arrow keys When entering IP addresses the on the keypad will include a period in the
25. See Billing SetCIDName Set CallerID Name SetGlobalVar Set variable to valu SetLanguage Sets user languag SetMusicOnHold Set default Music On Hold clas SetVar Set variable to valu SIPdtmfMode Change DIMF mode duringSIP call SMS Send and receive SMS short messaging service not yet in CVS SoftHangup Soft Hangup Applicatio StopMonitor Stop monitoring a channe StopPlaytones Stop playing a tone lis StripLSD Strip Least Significant Digit StripMSD Strip leading digit SubString Save substring digits in a given variabl Suffix Append trailing digit System Execute a system comman Transfer Transfer caller to remote extensio VoiceMail Leave a voicemail messag VoiceMail2 deprecated Leave a voicemail messag VoiceMailMain Enter voicemail syste VoiceMailMain2 deprecated Enter voicemail syste Wait Waits for some tim WaitForRing Wait for Ring Applicatio WaitMusicOnHold Wait playing Music On Hol Zapateller Block telemarketers with SI ZapBarge Barge in monitor Zap channe ZapRAS Executes ZaptelISDN RAS application Here are the the same applications listed by group ADSIProg Load Asterisk ADSI Scripts into phon Authenticate Authenticate a use ChangeMonitor Change monitoring filename of a channe GetCPEID Get ADSI CPE I SendDTMF Sends arbitrary DTMF digit SendImage Send an image fil SendURL Send a URL System Execute a system comman Transfer Transfercaller to remo
26. Signficant Digits to strip usually 1 or 0 TRUNK IAX2 user pass provide Variables may be set with SetG obalVar in an extension definition Here is an example exten gt s 2 SetVar counter 0 Variables are referenced with a dollar sign and curly braces for example S MYVAR Options are set using the equals sign Spaces are ignored For example myoption valu myoption valu An option can take multiple values Multiple values are listed within square brackets and are separated by the pipe symbol For example myoption valuel value2 value3 In this example myoption can be assigned a value of value7 value2 or value3 Objects are instantiated with the gt construct For example myobject gt some_parameter creates an object named myobject with the value of some_parameter Configuration commands are keywords and value pairs separated with equals or equals greater than The asterisk command parser treats the equals and equals greater than the same keyword valuel keyword2 gt value2 Asterisk switches communications sessions between channels for example a SIP channel or an IAX channel You must be familiar with the channels Asterisk supports before attempting any configuration Refer to theAsterisk Architecture chapter or the individual chapters on channel configuration for information about channels To configure Asterisk you must alter the contents of the configuration files listed above
27. T Carrier line is installed you can use it to send and receive data Customer data including voice for telephone calls data or video can be sent over theT Carrier line Note that this type of circuit is rapidly becoming obsolete Many new DS 1 circuits are being delivered on one pair of copper wires using HDSL technology T Carrier is a channelized system In North America the basic data channel is called a Digital Signal Zero DSO channel Digital Signal Zero was standardized by the ANSI T1 107 guidelines The international ITU T guidelines are slightly different DSO is a dedicated point to point line service DSO service can send voice and digital data including video Each DSO channel provides 64 kbs of bandwidth enough bandwidth to transmit a digitize voice signal Each DSO provides a 64 kilobits per secondPCM end to end channel transmitted over theT Carrier Voice Signals are sampled 8 000 times a second Each of the samples is digitized into an 8 bit word which supports a 64Kbs signal Each of the 8 bit words is sent over the DSO channel The multiple T Carrier channels in a single T Carrier connection can transmit voice or to transmit data The separate channels in aT Carrier circuit can be assigned to different uses Some channels can be dedicated to telephone usage while others are Simultaneously dedicated to data As described in the following section DSO channels can be combined to create high bandwidth con
28. The simple configuration is the sample configuration on the Mepis distribution CD SIP the name of the peer or hostname or IP address of a remote server an optional port number Defaults to 5060 the standard SIP port an optional extention Note the full length of the SIP string may not exceed 256 characters SIP ipphone SIP peer ipphone SIP 8500 sip com 5060 Extension 8500 at sip com port 5060 SIP 1010 The SIP client 1010 on the local Asterisk server SIP OEJ SIP client OEJ on the local asterisk server SIP 10000 fwd pulver com 5060 SIP client 10000 at fwd pulver com SIP the identified peer a random identifier used to uniquely identify a call from a single peer SIP 192 168 0 1 01fb34db a SIP call from 192 168 0 1 SIP sipphone 45ed721c a SIP call from the peer named sipphone Any SIP client or server is identified in sip conf The syntax for defining a SIP channel is XX parameterl valu parameter2 valu In this configuration xxx is a username associated with a SIP client Other configuration files use the section namexxx to refer to this SIP device For example if a SIP phone has been assigned a phone number of 123 inextensions conf then the corresponding section in sip conf should be named 123 A statement like Host209 234 23 3 will allow incoming calls to be accepted from a remote server without a register entry in sip conf for registration to the r
29. a unbalanced hybrid at thePSTN to TDM interface When installed properly the hybrid should subtract some of the transmitted signal from the received signal This will remove any echo from the signal that is caused by a local loopback of the transmitted signal The PSTN tightly controls impedance matching and uses echo cancellers Echo commonly occurs when the hybrid is installed wrong or damaged in some way This can make the impedance of thePOTS line unpredictable If echo is caused by such an impedance problem only the near end user will hear it Such near end echo can be easily removed by repairing the physical circuit The far end user has no such repair available to them The echo can still be removed with signal processing Echo suppression algorithms can remove echo Echo can be caused by IRQ problems with installed Zaptel board If this is the case turn off the automatic BIOS detection and IRQ assignments turn off any unneeded hardware and assign the IRQs manually This information was found the hard way by a major California VoIP company Race Technologies Inc atwww race com Echo suppression algorithms typically sample the actual signal and then sample again after a small time delay One or more delayed samples can be weighted and then subtracted from the incoming Signal Different echo cancellation algorithms are available that use different sampling and weighting criteria Echo suppression algorithms will
30. actually try t contact you to sell you a T1 line Your local phone company is always a potential source of a T1 line although they may not be the most cost effective solution If you connect to the Internet with a T1 line the line goes from your office all the way to your Internet provider s facility When you are connecting to thelnternet the T1 channels will send data instead of telephone calls If you use anlnternet connection for VoIP calls the calls are sent over the T1 line as data You rent a T1 line usually from a telephone company by the month You may pay for it by the mile The cost often depends on how far it is between the end points The cost usually depends on th amount of wire that you need to connect between your office and yourlnternet provider The phone company calls this wire miles It s the length of the wire in miles between you and them T1 connections are usually point to point The T1 line goes from your office to your Internet provider Usually the T1 uses wires that your local telephone company owns That means your T1 goes fro your office to your telephone company and then from your telephone company to yourlniernet provider The local loop is tariffed This means the government has approved what the local loop costs This means that the price for the local loop is usually going to be the same no matter who you buy your T from For the part of the T1 line that runs from the local telephone company to your
31. and an extension to connect to a mailbox This example assumes that extensions are three digits from 100 to 199 exten gt _ 1XX 1 Voicemail u EXTEN 1 exten gt _ 1XX 2 Hangup If voicemail mailbox IDs and extension numbers are the same the following commands in extensions con will allow users to access their mailbox directly exten gt 199 1 VoicemailMain s CALLERIDNUM exten gt 199 2 Hangup The following entry in extensions conf will send a caller to voicemail when the zero key is pressed Note this uses a lower case letter o lower case letter o after an extension is reached pressing zer starts voicemai exten gt o 1 voicemailmain The following commands change the user s voicemail password dial VoiceMailMain enter 0 e enter 4 change the password confirm the new password Including a directory command in extensions conf provides a directory for callers When a caller presses the correct key they will hear instructions for searching a directory of users With the following command in your dial plan when the user presses seven they will hear the directory instructions exten gt 7 1 Directory main The directory command looks in voicemail conf for a list of extensions The directory command does not by itself read any names to the caller The argument given here main names the context in voice mail conf where the directory command looks for a list of ext
32. and remote hangup and fully supports Pseudo TDM bridging through Zaptel The device is fully supported by AsteriskPBX for both incoming and outgoing calls The two sockets on the back of the X100P one labele ine interface and phone interface Connect the wall socket to the line interface You can then optionally connect an analog telephone to the phone interface Thi phone will operate if Asterisk fails or if there is a power failure The Wildcard TDM400P is a half length PCI 2 2 compliant card that supports from one to four telephone interfaces for connecting analog telephones or analog lines to a PC This quad station FXS or FXO half length PCI card supports standard analog and ADSI telephones for SOHO Small Office Home Office applications This card accepts any combination of up to fourFXO and FXS modules Using Digium s Asterisk PBX software and standard PC hardware one can create a SOHO Small Office Home Office telephony environment that includes all the sophisticated features of a high en business telephone system The TDM400P takes the place of an expensive channel bank and brings the system price point to a low level By usingFXO and FXS modules with the TDM400P one can create a solution with support for a range of telephones To scale this solution simply add additional TDM400P cards populate with modules In the UK you may need an adaptor that provides a ring capacitor or the phone may not ring If you are using phones from
33. bit files Then convert the wav files to gsm files The Linu sox utility can convert files Here is an example sox inputfile wav r 8000 c 1 outputfile gsm resample ql Quicktime for Windows will play back gsm files It is very easy to configure meetme conferencing With a meetme conference any incoming calls are added to a conference Note you will need a timing source for meetme conferencing to work First add a conference id to meetme conf rooms conf gt 123 The MeetMe command in extensions conf provides access to a conference call MeetMe confno options Add the MeetMe application to your dial plan With the following lines in extensions conf callers to extension 18 are prompted for a conference number If they enteri23 on the dial pad they will be added to conference 123 Conferencin exten gt 18 1 Answer exten gt 18 2 Wait 1 exten gt 18 3 Meetme Note that meetme conferencing requires trunking which implies an incoming Tl or El Trunking from the phone company allows successive incoming calls to be forwarded to the Asterisk server Without trunking the second caller to the incoming number will receive a busy signal You coul potentially work around this by providing incoming callers different telephone numbers The available options are m set monitor only mode user can only hear the audio not participate p allow user to exit the conference by pressing t set talk only
34. but not all countries telephone networks supply caller ID A channel bank is a multiplexer A channel bank has one or more high speed T1 connections on one side and multipleFXS or FXO ports on the other side A channel bank manages multiple telephone connections For example a channel bank can provide 24FXS ports or 24 FXO ports The channel bank can connect to a T1 Zaptel card If you use a channel bank you will need to configure it for use with Asterisk Consult the manufacturer s documentation for assistance with configuration There are several manufacturers of channel banks including Adit Adtran and Rhino Features you want in a channel bank include 2 wire support disconnect supervision and support for fx lines Th channel bank must be able to function as a ring generator that is it must be able to supply 100 va ringing voltage Modern channel banks can translate analog signaling features into a T 1 format For example a modern channel bank should be able to interpret the 1200 baud FSK caller ID stream that is inserted between the first and second ring and translate that into digital caller ID delivery You should look for the following features in a channel bank Caller ID Caller ID call waiting distinctive ring call waitin analog 3 way calling flash hook analog call transfer 3 way call w hang up stutter dial tone message waiting far end disconnect supervision onFXO cards Some channel banks like the ADIT 600
35. call may be parked for later pickup The optional url argument is only sent on channels that will support the transmission of a URL The most common use of dial connects a call from an extension to an interface Here is an example that switches a call from extension 100 to Zap channel one and dials for twenty seconds dial exten gt 100 1 Dial Zap 1 20 Here is another example for dialing out This example allows the user to dial nine before dialing an outside number The call is sent out over TRUNK2 The exten variable contains the extension number The following in extensions conf will say ninety seven when a caller dials extension 97 exten gt _9NXXXXXX 1 Dial TRUNK2 EXTEN 1 Here is another example that repeats a number exten gt 97 1 SayNumber EXTEN The exten variable serves a different purpose with the dial command than with other commands When dialing theexten variable holds the digits the user has selected on the keypad Here is an example exten gt _9NXXXXXXX 1 Dial Zap g2 EXTEN You can strip leading digits off the number to be dialed The number after the colon specifies how many leading digits are stripped from the number before it is dialed Note that the nine in the example above is strippe off of the number before it is dialed by specifyin exten gt _9NXXXXXXX 1 Dial Zap g2 S EXTEN 1 Here is example configuration for outbound dialing First outbound dialing is d
36. calls made from one of these phones is managed by the inside context This example is used in an installation that connects the first two spans of a TE400P toa channel bank The channel bank makes the forty eight T1 channels available asFXS ports The third and fourth spans in this example connect to two T1 lines another forty eight channels These channel connect to thePSTN over the two T1 lines These T1 lines are not PRI lines Here is the configuration in zaptel conf zaptel conf span 1 0 0 esf b8z span 2 0 0 esf b8z span 3 0 0 esf b8z span 4 0 0 esf b8z fxoks 1 48 m 49 96 loadzone us defaultzone This sets the channel configuration for each of the four spans Channels 1 48 will be used to connect to the channel bank channels 49 96 will connect to the two T1 lines from XO If you are not using T1 or E1 boards but you are using FXO or FXS adaptors yo don t need span definitions Here is part of the corresponding configuration in zapata conf This example is drawn from the same working installation This sample configures the access to theFXO channels zapata con 4 17 2004 Paul Mahler www signate com channels language en switchtype national signalling fxo_ks rxwink 300 usecallerid yes hidecallerid no callwaiting yes callwaitingcallerid yes threewaycalling yes transfer yes cancallforward yes callreturn yes signalling fxo_ks gt 1 48 signalling em_w group 2 chann gt 49 96 Zap
37. com for a variety of network interfaces including PSTN POTS T1 E1 PRI PRA amp M Wink and Feature Group D interfaces among others Traditional TDM hardware resources including echo cancelling HDLC controllers conferencing DSP s and DAX s are replaced with software equivalents With software TDM switching is still done in near real time and call qualities are excellent The pseudo TDM architecture extends the TDM bus across Ethernet networks Zaptel devices support data modes on clear channel interfaces including Cisco HDLC PPP and Frame Rela Interfaces for connectivity to traditional legacy telephone services that do support Pseudo TDM switching includ TABLE 02 1 Non Zaptel Interfaces Interface Description ISDN4Linux Basic Rate ISDN interface for Linux OSS Alsa Sound card interfaces Linux Telephony Interface LTI Quicknet Internet Phonejack Linejack piatogic Full duplex Intel Dialogic hardware These are standard protocols for communications over packet networks like IP or Frame Relay These interfaces do not rely on specialized hardware These interfaces will work without specialized hardware Session Initiation Protocol SIP Inter Asterisk Exchange IAX versions 1 and Media Gateway Control Protocol MGCP ITU H 32 Voice over Frame Relay VoFR The LinuxTelephony Interface was developed primarily by Quicknet Inc with help from Alan Cox This interface is geared toward single analog
38. ee oh or oS UN An incoming call is held for one second to let the calling party hear a ring The call is answered The digit and response time outs are set to five and ten seconds Asterisk then plays the intro message This message could provide the calling party with a greeting for example Thank you for calling our company This is played in the background This means the calling party can interrupt the message by pressing a key on the telephone keypad After the introduction another message the instructions is played This could be a message like If you know your parties extension dial it now Dial 1 for sales or 2 for support If they calling party does not provide an extension Asterisk switches the call to the operator The dial plan for the operator is not shown in this example If the calling party enters an invalid extension the pbx invalid message is played to them They are then played the instructions again This configuration suggested by Robert C when added to extensions conf will enable you to record messages Whatever you say into a telephone is saved into a file This is useful for recording Asteris responses Dialing extension 100 will record whatever you say and leave it in tmp asterisk recording gsm Press the key or hang up to stop recording Remember to rename the file asterisk recording before recording another message Note that Asterisk expects sound files to be held in the directory var lib aste
39. equivalent of the T100P providing a single E1 32 channel interface First note that a real T1 cable is not the same as a CAT5 cable You are much better served by using a real T1 cable Second note that the T100P is manufactured in such a manner that you may very likely need a T1 crossover cable to connect between the T100P and an incoming T1 line This means that you wil most likely not need a crossover cable to connect between a T100P and a channel bank Here is the wiring for a T1 crossover cable Pin Pin 5 Pin 2 Pin 4 Pin 3 _ Pin 3 Pin4 Pin 2 Pin 5 _ Pin Pin 6 _ Pin 6 Pin 7 Pin 7 Pin 8 n Pin Rath f _ aie Pin 8 mk Pin Figure 08 4 T1 Crossover Cable A single span E1 half length available with 2U bracket PCI card sporting the same features as the T400P the quad port version The E100P is a single span E 1 30 channel card that supports all th functionality of our quad E1 card This card supports both voice and data modes on its single T span For example the card can support 16 channels dedicated to voice and 16 to data while passing all traffic through to the AsteriskPBX which reliably routes the channels to their designated locations This eliminates the need for an external router PRI Switch Compatibility EuroISDN network or CPE CAS Voice Modes A Law Mu Law and linear Modes Supported E amp M E amp M Wink Feature Group D Groundstart FXO amp FXS Data Mo
40. exten gt t 1 Hangup The registration statement in jax conf informed the remote server of the location of your Asterisk server You must modifyiax conf to indicate what context in the dial plan will process the call In this example the context named ax incoming is named This specifies that a call coming in on the IAX channel will be processed by theextensions conf instructions shown above that is the iax incoming context Note that the remote server must be correctly configured to send calls to the saxserver context specified here in ax conf iaxserver context iax incomin secret iJKLmNo auth md type frien hostqw5 voicepulse com You could additionally modify extensions conf and voicemail conf to pass any unanswered calls to voice mail For any enterprise telephony system a dial plan determines call routing and processing For example if a call comes in on aPOTS line where should that call be directed If someone doesn t answer their phone what should be done with the call Should phones be answered after 50m The file extensions conf is the main Asterisk configuration file This file contains the Asterisk dial plan The dial plan controls all Asterisk call switching The Asterisk dial plan controls the behavior of al connections through Asterisk The dial plan determines the route a call takes through the interfaces o an Asterisk system Commands in theextensions conf file route calls based on either the called or
41. featured call processing server Asteris is an open architecture Computerized Telephony Integration platform Many Asterisk systems are successfully installed around the world Asterisk technology is working today for many businesses Asterisk can be used for many things and has features includin Private Branch Exchange PBX Voicemail Services with Directory Conferencing Server Packet Voice Server Encryption of Telephone or Fax Calls Heterogeneous Voice over IP gateway H 323 SIP MGCP IAX Custom Interactive Voice Response IVR system Soft switch Number Translation Calling Card Server Predictive Dialer Call Queueing with Remote Agents Gateway and Aggregation for Legacy PBX systems Remote Office or User Telephone Services PBX long distance Gateway Telemarketing Block Standalone Voicemail System Many of the world s largest telephone companies have committed to replacing their existing circuit switched systems with packet switched voice over IP systems Many phone companies are alread transporting a significant portion of their traffic with IP Many calls made over telephone compan equipment are already being transported with IP Packet switched voice over IP systems are in principle as efficient as a synchronous circuit switched systems but only recently have they had the potential to achieve the same level of reliability as the public switched telephone network or proprietaryPBX equipment With the invention and implem
42. for IP telephony in a business setting There are various wireless links like 802 11 that can provide high speed data access These are not listed in the table as they are not commonly available from commercial providers Quality of service is a very serious issue Most businesses rely heavily on their telephones to do business If your phones are out you may be out of business T1 type lines usually come with a service levl agreement SLA If the line goes down someone fixes it within an agreed upon time Most of th other connection types includingDSL may not have a service level agreement Lastly you may be sharing your data connection with voice and data traffic In this case you may want special loadQoS or traffice shaping that pre allocates bandwith for telephone calls This will assure t hat calls will always get through ahead of data services Over time because connections are becoming less expensive Internet connections are becoming less expensive You should shop to find the best price for a T1 line from a company who may actually sta in business Sadly there is no central location have found that lists all the companies that sell Internet connections in your area There are some Internet sites that will refer your inquiry about T1 lines to companies that pay them for the referral This is annoying because you can t find all the local vendors Referral agencies will insist on getting your contact information Worse yet they will
43. gz cd mpgl23 0 59 make linu make instal Make sure the compiled package is in usr bin mpg 123 If you install the Guarddog firewall and you want to access the machine remotely you will have to enable access to your machine for SSH or whatever access utilities you may prefer It is better to leav the firewall off at least during the initial steps of configuring and connecting your Asterisk server You may require a DHCP server for example for configuring SIP phones dynamically The Mepis distribution comes with an installed and operational DHCP server This server has been configured to be the authoritativeDNS server on its network The DHCP configuration file is found in etc dhcp3 in the Mepis distribution Here is a sample dhpcd conf file Sample configuration file for ISC dhcpd for Debian and Asteris Signate LLC 12 15 0 Id dhepd conf vl 1 1 1 2002 05 21 00 07 44 peloy Exp The ddns updates style parameter controls whether or not the server will attempt to dDNS update when a lease is confirmed We default to the behavior of the version 2 packages none since DHCP v2 didn have support for DDNS ddns update style none Gateway Option reutely2 168 1 1 Change this to the domain name where youDNS servers live option domain name yoururl com IP addresses for your domain name servers option domain name serve206 16 128 12 209 16 31 12 URL of a network time protocol server option ntp ser
44. in the ground or wires they hung from poles Boards you add to the server running Asterisk connect the server to the connection you rent from the phone company When someone dials your telephone number from thePSTN your desk phone rings Analog phone Asterisk VOIP running on a PC Pf a a Me VOIP ee a Pa r Your Network id PSTN _ The Internet IF Phone in Shanghai Figure 01 2 Connecting to the Public Telephone Network Various companies make a wide range of telephone systems from small to large All the components of a proprietary system come from a single manufacturer The single company designs and builds all th hardware and software for their telephone system They manufacture the system themselves None o their equipment will work with systems from other companies This is how they control the price Manufacturers usually sell the largest systems themselves through a dedicated sales force A dedicated sales force is of course expensive The cost of this sales force and all the support behind the sales forc is included in the price you pay for your telephone system Anything smaller than the very largest systems are usually sold through representatives or distributors The smallest systems are typically available through representatives or distributors The price you pay for a proprietary telephone systems includes all the costs of manufacturing and distribution The price has to be high enoug
45. interfaces and provides support for low bit rate codecs The following products are known to work with Asterisk although they may not work as well as Digium devices Quicknet Internet Phonejack ISA FXS Quicknet Internet Phonejack PCI PCI FXS Quicknet Internet Linejack ISA FXO or FXS Quicknet Internet Phonecard PCMCIA FXS Creative Labs VoIP Blaster limited support The ISDN4Linux interface is used primarily in Europe to connect lines from BRI interfaces to an Asterisk machine Any adapter that is supported by ISDN4Linux should work with Asterisk The OSS and ALSA console drivers allow a single sound card to function as a console phone for placing and receiving test calls Using auto answer auto hang up the console can create an intercom Asterisk supports Adtran s proprietary Voice over Frame Relay protocol The following products are known to talk to asterisk using VoFR You will need a Sangoma Wanpipe or other frame relay interface to talk to them Adtran Atlas 800 Adtran Atlas 800 Adtran Atlas 550 Asterisk supports two industry standard and one Asterisk specific VoIP protocols IAX is the Asterisk specific VoIP protocol It is the standard VoIP protocol for Asterisk networking It provides transparent interoperation withNAT and PAT IP masquerade firewalls It supports placing receiving and transferring calls and call registration With IAX phones are totally portable Just connect a phone or
46. is transmitted 8 000 times a second Digital T Carrier circuits provide much greater bandwidth than analog circuits A set of copper wires used to transmit an analog Signal can instead transmit data digitally Sending data digitally allow much more data even much more digitized voice to be sent over the same copper wires T Carrier is used to build the ISDN Integrated Services Data Network ISDN is a set of integrated standards used to build a digital telephone network WithISDN the same switches and digital transmission paths are used to establish connections for different services for example data and voice The ISDN standard was first published as one of the 1984 ITU T Red Book recommendations and expanded in the 1988 Blue Book ISDN uses Public Switched Telephone Network PSTN switches and wiring This wiring is upgraded to support the basic telephone call ona digital network Different types of T Carrier circuits are available When you order T Carrier line for example a T1 line you order a circuit with a specified amount of bandwidth For example a 24 channel T1 line wil provide 1 544mbps of bandwidth or a T 3 line will provide 44 736 mbps of bandwidth T Carrier costs are continually dropping T Carrier lines are extremely popular for business users who wish to connect to theInternet or the PSTN The T designation specifies the physical interface for services obtained from a local carrier That is T Car
47. make other data flows fail Many routers and switches provide facilities for managing QosS For example you may have a small office with a DSL line The DSL line might have 384 kbps of bandwidth bi directionally QoS tools would allow you to dedicate 128 kbps of the bandwidth of the DSL line specifically to telephony This would mean there would always be bandwidth for telephone calls no matter how busy thelnternet connection gets carrying other traffic The following table shows where Asterisk related files are stored TABLE 02 4 Directory Description etc asterisk All configuration files except etc zaptel conf usr sbin Asterisk executables and scripts including asterisk astman astgenkey and safe_asterisk usr lib asterisk Asterisk architecture specific binary objects usr lib asterisk modules Runtime modules for applications channel driver codes file format driver etc usr include asterisk header files required for building asterisk applications channel drivers and other loadable modules var lib asterisk Variable data used by Asterisk during normal operation var lib asterisk agi bin AGI scripts used by the dial plan AGI application var lib asterisk astdb The Asterisk database hold configuration information This file is never changed by hand Use Asterisk database command line functions to change add to and mociry wrie Tiles var lib asterisk images Images referenced by applications or by the dial plan
48. medium size office The size server you will require depends heavily on the architecture of your system The type and mixture of phones analog SIP Skinny or H 323 or soft makes a difference The number of phones makes a difference The mixture of internal and external calls makes a difference The network bandwidth and quality make a difference Transcoding is very CPU intensive as is echo cancellatio As an example a single machine with a 2 6 GHz Pentium 4 1 GB of RAM and 3 T1 connections can manager 40 concurrentSIP to Zap conversations and over 5000 total phone calls per day The load on a server like this can in a matter of moments vary from 0 00 to 6 25 To connect between your Asterisk server and the phone network you will need an interface board For example a T1 E 1 orFXO analog interface card from http www digium com For guaranteed access to emergency calling services like 911 consider having at least one landline available from the telephone compan An FXS analog interface card from Digium will allow you to connect analog phones and fax machines directly to your Aterisk server These phones can use your existing telephone wires If you wish t switch facsimile traffic through an Asterisk server you must use a lossless codec and you must have a high quality network connection Significant packet loss or high latency will prevent facsimile transmission or reception An ethernet interface connects your Aste
49. never be as effective as eliminating echo at the source by balancing the hybrid Asterisk includes several echo cancellers Acoustic echo can be caused by feedback between a headset or handset microphone and speaker Replacing the handset with better equipment can cure this problem Echo cancellation can be built into hardware or software Echo cancellation done by a hardware Digital Signal Processor DSP in the telephone is more effective than software echo cancellation Managing Asterisk of course means managing Linux This book assumes that you are already familiar with Linux administration You may want to use a GUI client like gastman or astman monitor you Linux installation You should regularly monitor the size of the log files in var log asterisk For quality of service you should separate your PC network from your VoIP network At least separate them logically at layer three You may want to isolate them physically Ensure a stable Asterisk installation by using a staging server Test any new release on the release server before placing it into production Changes toextension conf can easily break your Asterisk server Be careful to keep backups of your configuration files This will allow you to revert to a working state Use the latest 1 0 release version rather than the latest development version Regularly perhaps once a week stop and start your Asterisk server A restart is not as effective If you have con
50. of band signalling Out of band signalling has several benefits including reduced dialing delay higher signal bandwidth and the ability to multiplex multiple signals over single channel Out of band Signalling greatl improves call service including call completion Network to network signalling includes in band signalling methods like Multi Frequency MF and Robbed Bit Signalling RBS MF is like DTMF but uses different frequencies SS7 C7 in Europe is the common out of band signalling protocol used between switches SS7 is used to send messages between Switches for basic call control SS7 allows signalling to control th Intelligent Network The Intelligent Network implements Custom Local Area Calling Services lik three way calling or call waitin CLASS services include Call Forwarding Call Waiting Three way Calling Speed Calling Anonymous Call Rejection Automatic Callback Automatic Recall Call Forwarding Busy Call Forwarding No Answer Call Name and Number Delivery Call Name and Number Delivery w Call Waiting Call Number Delivery Call Number Delivery w Call Waiting Call Number Delivery Blocking Customer Originated Trace Distinctive Ringing Call Waiting Selective Call Acceptance Selective Call Forwarding Selective Call Rejection Voice Mail SS7 to database connections support network based services including 800 number service and Local Number Portability The following sequenc
51. on the behalf of other clients It can rewrite headers t identify the proxy as the request initiator The proxy server makes sure that traffic is sent back to th correct client A redirect server accepts SIP requests and responds to the client with the address of the next server A redirect server doesn t manage calls A redirect server doesn t process or forwardSIP requests A SIP client must be able to locate a SIP server A SIP client must determine the IP address and port number of a target server The defaultSIP port is 5060 The SIP client can query a Domain Name Server DNS for a sever IP address After SIP address resolution the SIP client sends one or more SIP requests and gets back one or more SIP responses All the requests and responses are part of a SIP transaction Signalling sets up mantains and terminates calls SIP provides a rich set of signaling facilities for VoIP SIP can Register IP phones Register other SIP devices Register end user preferences Authentication authorization and accounting Address resolution name mapping and call redirection Find the media capabilities of a target endpoint using Session Description Protocol e Determine the availability of a target endpoint e Establish a session between an originating and target endpoint e Allow mid call changes like the addition of another endpoint to a conference Report call progress including call success and f
52. provides all the functions of a standard desk telephone The 7960must be attached to an ethernet network to operate There is no connection to thePSTN The 7960 can run SIP or the proprietary Cisco Skinny protocol For use with Asterisk you must run SIP You can easily switch the phone between the two protocols The 7960 contains flash memory The flash memory saves SIP firmware and saves phone configuration information Information written to flash memory is saved when the phone power is off Flash memory stores hardware configuration information user configuration information and local configuration information A 7960 can be configured from the keyboard or from files downloaded from a TFTP server This chapter demonstrates 7960 configuration via downloading To configure the phone from a TFTP server a TFTP server address must be manually programmed into the phone network settings or be sent to the phone from a DHCP server Network settings manually entered into the phone may be lost when the phone is rebooted A 7960 phone must be able to communicate with a TFTP server to change to a different version of SIP The phone loads configuration information from the TFTP server including SIP images or SIP settings Note that Windows TFTP servers can be difficult to use They can be insensitive to the case of names or names with special characters or spaces for example This chapter assumes you are using a version o TFTP
53. quality register gt port Multiple register entries are allowed in the general section Registration sends a remote Asterisk server the ip address of the IAX client The remote Asterisk server must have a peer entry with the sam name and secret The lt name gt is a required field It is the remote peer name that an IAX client uses to identify itself A optional secret may be provided The secret is a shared password between the IAX server and the IA client If the secret is in square brackets it is interpreted as the name of a key The IAX client must have the private key var lib asterisk keys key and the IAX server must have the corresponding public key The host is a required field It is the hostname or IP address of the IAX server The port specification is optional and is by default 5036 if not specified This should not be changed Users can be one of three types user peer or friend A user type of user defines a connection for incoming calls A user type of peer defines a connection for outgoing calls A user type of friend defines a connection for both incoming and outgoing calls type user peer friend One or more context lines may be specified for a user The context links the IAX configuration to the dial plan A call coming in on this channel will be directed to the named context inextensions contr context Permit and deny rules may be applied to users allowing them to connect from c
54. response IVR and conferencing which are very expensive in proprietary systems Scenario A Large Business Asterisk can benefit a large business with offices in several locations In this scenario there are fifteen hundred employees The main office is in New York Distric offices are in Chicago and Los Angeles Support is done at the Denver office Asterisk servers are in separate hosted facilities in New York and Chicago The Asterisk servers communicate with each other over a high speed Internet connection Various Asterisk servers are needed to support this many users The Asterisk servers communicate witheach other and each of the branch office over a high speed internet connection The hosted facilities are hardened an geographically separate from each other and the company offices With shared Asterisk servers if one fails the another takes over This is much safer for the company as there is no single point of failure Even in the event of an outage at one of the main offices telephone communications won t be disrupted If there is a problem in the office employees can take their phones off their desk and move them to their home or another office If there is a problem at the Chicago office key employees can relocate to the New York office They can tak their desk phones with them or use phones already at the New York office Business goes on Users seeking support can call local numbers in any of the regions These calls a
55. several minutes for the phone to finish the conversion process The sequence of headphone mute and speakerphone lights flashing i longer A new message BootingDSP appears at the bottom of the 7960 screen at the end of the download process When the phone has finished the boot process check under the firmware version to insure that the newSIP image has been loaded To upgrade to version four edit OS79XX txt to contain P0OS30404 Change SIPDefault cnf to include Image Version image_version P0S3 04 4 0 Edit SiPDefault cnf and remove any lines for version 4 yes four and five Make sure a copy of the corresponding SIP image is in the TFTP directory POS3 04 4 00 bin TABLE 13 6 OS79xXx TXT SiPpetault cnut SIPSIPmacaddress cnf RINGLIST DAT ringerl pcm ringer2 pcm P0S3 04 4 00 bin When you boot the phone a new message will appear after the network configuration message Upgrading Software to indicate the SIP image is being replaced in flash memory The settings options are now different as well with more choices From settings status status messages there should be only two messages Invalid proxy_emergency Invalid proxy backu From settings status firmware versions the application load ID should be POS 04 4 00 To change the password edit the file SIP MAC_address cnf and change the password in the line phone_password cisco Edit the file SIPDefault cnf and replace the lines for versi
56. show registry A iax2 show stats A iax2 show users A debug A debug A debug A iax2 trunk iax iax no iax set jitter iax show cache iax show channels iax show peers iax show registry A lax show stats A lax show users A include context A init keys A load A logger reload A logger rotate A mgcp audit endpoint A mgcp debug A mgcp no debug A mgcp show endpoints A no debug channel A Remove a specified include from context Dumps a list of agi command in html format Exit Asterisk Reload extensions and only extensions Hangup a call on the console Display help list or specific help on a command Enable IAX debugging Disable IAX debugging Sets IAX jitter buffer Display IAX cached dialplan Show active IAX channels Show defined IAX peers Show IAX registration status Display IAX statistics Show defined IAX users Request IAX trunk debug Enable IAX debugging Disable IAX debugging Sets IAX jitter buffer Display IAX cached dialplan Show active IAX channels Show defined IAX peers Show IAX registration status Display IAX statistics Show defined IAX users Include context in other context Initialize RSA key passcodes Load a dynamic module by name Fi Reopens the log files P Reopens the log files Audit specified MGCP endpoint Enable MGCP debugging Disable MGCP debugging Show defined MGCP endpoints Disable debugging on a channel a pri debug span pri i
57. single Tl line Should one server fail the backup server will immediately take over although any calls in progress will be lost Backup backup and more backup Backup your complete installation with a tool like Mondo Resuce Backup all your Asterisk specific configuration files If your installation calls for it backup any voice mail It is very easy to manage an Asterisk system remotely Use the utility of your choice to get to a command prompt on the remote system Your most secure option is to communicate with SSH which runs onTCP port 22 To enable an SSH connection with Mepis you will have to modify the file etc hosts deny Comment out the denial line as shown below ALL PARANOID The Linux screen command will allow you to share what you are seeing with another user The second user can connect to the server and arrive at a command prompt The second user can then issue th screen command The screen command will allow the second user to see in their command windo whatever is in your command window With Debian Linux se the command apt get install screen Use the Web site wwww rpmfind com to locate the rpm for Redhat Linux Go to the Web site and search forscreen For example screen can be found at ser en 3 9 13 5 1386 rp To download this package right click on the link and copy the shortcut to get the address Download the file and install it as follows cd tmp wgetftp 195 220 108 108 l
58. smail with the command etc init d smail star The mp3 player that ships with your distribution may not work with Asterisk you may have to replace it with another mp3 utility Note that you will need a timing source for music on hold to work Music on hold as any other application is accessed from the dial plan and configured in extensions conf Here is an example exten gt 6789 1 Answer exten gt 6789 2 MusicOnHold mymusic You must modify musiconhold conf Here is an example Music on hold class definitions classes default gt quietmp3 var lib asterisk mohmp3 mymusic gt quietmp3 usr share mp3 mymusic random music gt quietmp3 usr share mp3 mymusic z loud music gt mp3 usr share mp3 mymusic The quietmp3 directive automatically levels music to listenable levels The z option plays songs randomly rather than sequentially US Copyright laws may not allow you to play unlicensed music on hold You can get an inexpensive license to play copyrighted music from the BMI library of over 4 4 million songs More information 1 available athttp www bmi com Asterisk sounds are found in var lib asterisk sounds The format of these files is gsm The Asterisk record command can be used to record sound files as described in the dial plan configuration chapter When recording new files in a studio for later use with Asterisk try recording 8Khz 16 bit wav files which will are likely to work better than 8
59. supplied with Linux Turning on a 7960 phone starts a complex initialization process When power is applied to the phone a bootstrap program runs If a 7960 phone is running SIP simultaneously pressing the key the 6 key and the settings key reboots the phone This does not work if the phone is configured forSkinny Flash memory holds a bootstrap When the phone boots the bootstrap runs The bootstrap loads and executes the phone firmware image from flash memory The phone next requests VLAN settings from a Cisco Catalyst Switch The LCD panel shows a message for this request The phone can operate without a VLAN The configuration of VLANs is beyond the scope of this book You may need assistance from your system administrator if your environment uses a VLAN Next the phone contacts the TFTP server Note that you must have a TFTP server to configure 760 phones The dual boot image OS79XX TXT contains the name of the SIP version the phone should use The phone will download the correctSIP software from the TFTP server SIP firmware is only downloaded to the phone and stored in flash memory when a SIP version named in the configuration files is different than the version already stored in the phone The phone will next obtain SIP parameters from the TFTP server If these steps all completed correctly the phone is ready for use The dual boot file OS79XX TXT contains the name of a firmware image The 7960 will attempt to dow
60. the USA aside from any power requirements they may have you should just b able to plug them in Figure 08 2 TDM400P The T100P is a compact and powerful interface card supporting voice an data transmission over T1 andPRI connections The single span T1 half length available with 2U bracket PCI card has the same features as the T400P The low profile half length PCI form factor allows this device to fi within a 2U rack mount case or equivalent chassis This provides excellent density for call center service provider and other space sensitive applications Used with Asterisk the T100P offers the power to create a seamless network interconnecting traditional telephony systems with the emerging VoIP technologies The T100P can be used to deliver a wide range ofPBX and IVR services to the network or handset including Voicemail Call Conferencing Three way calling and VoIP Gateways The European equivalent is the E100P This card supports both voice and data modes on its single T span For example the card can support 12 channels dedicated to voice and 12 to data while passing all traffic through to the AsteriskPBX which reliably routes the channels to their designated locations This eliminates the need for an external router The T100P supports industry standard telephony and data protocols including Robbed Bit Signalling RBS and Primary RatelSDN PRI protocols for voice Cisco HDLS PPP and Frame Relay for data transmission Swit
61. the distribution all the packages and all the source code This will waste some disk space but disk space is cheap The Mepis release of Linux athttp www mepis org comes pre configured for Asterisk If your installation is a business PBX you need redundant hardware to approach the five nines reliability of a traditional PBX Get a server with ECC memory RAID 1 dual power supplies and hot swappable disks Keep a spare hard drive and spare interface boards on hand In addition to the computer you should have a power backup system If your users expect to be able to call for emergency services through the Asterisk server backup power is critically important An uninterruptable power supply UPS will isolate your asterisk computer from power problems It will keep you Asterisk server running for some time when the power is out The UPS can communicate with the Asterisk server to provide for a graceful shutdown after a power failure Note that othe network equipment for example switches or routers and telephones will need to be serviced with UPS Newer IP phones use power over ethernet This makes providing emergency power easier Make sure you have a current service agreement with an appropriate response time commitment Consider installing a redundant system or having a spare system or at least spare parts on hand An inexpensive server with a 2GHz processor 512Mb of memory and 60GB of disk space can run Asterisk for a small to
62. three way Calling that wouldn t be available with separate telephone lines A PBX usually has a console for use by an operator Alternatives to a PBX include Centrex Centrex provides a pool of lines from the central office to the enterprise Centrex can provide some of the same functions as a PBX for example voice mail call hold call waiting or call transfer Like the PSTN legacy enterprise telephony ET systems are circuit switched They both use a common infrastructure model All the control protocols and features are combined into a single model ET systems usually cannot handle the same volume of traffic asPSTN switches ET systems usually use proprietary protocols where thePSTN relies on the standard SS7 protocol Larger PBX systems typically have more features and abilities than smaller PBX systems This is the way legacyPBX vendors market their systems A feature you want may not be available on a PBX you can afford You can only get the features you need if you are willing to soend more money ET systems and Asterisk provide interoperability between a local system and the PSTN Many features in a legacy PBX system are rarely used Some features may have been developed for a single user to make a single large sale Because of this Asterisk does not yet have all the features of allPBX systems from all vendors Because Asterisk is an open platform features are easy to add and many new features are being added all the time If Asteris
63. to etc init d Then run the command chkconfig asterisk on Asterisk will now start automatically when you reboot Linux Don t install Asterisk to start automatically until you are comfortable with your Asterisk configuration While you are learning you will want to start and stop Asterisk many times manually from the command line There are open source tools available at http cr yp to daemontools html that help manage Unix processes You can use these tools to automatically start Asterisk if it fails Starting Asterisk using safe_asterisk Another script is available for starting Asterisk This script attempts to keep Asterisk running Start Asterisk as a daemon with the safe_asterisk script located at usr sbin safe_asterisk Echo can ruin a telephone conversation A caller expects to hear their own voice as they are talking It is annoying if they hear their voice with a delay of more than about 25 ms Long or loud echo can b intensely annoying Start by finding the source of the echo Echo is best eliminated at the source In the PSTN echo is commonly caused by impedance mismatches between the four wire network and the two wire local loop A hybrid is the interface where a two wirePOTS line divides into four wires with two lines for transmit and two lines for recieve The hybrid circuit makes it possible to transmi two channels of information in opposite directions on a single pair of wires Echo is often created by
64. to other nonSIP phones or a different manufacturer s phones Can non SIP phones transfer calls toSIP phones Create a grid of choices to assist your testing Test echo cancellation and change it as needed If you don t test echo cancellation in advance you are sure to get complaints from your users Document what you have done Document your system hardware and software architecture Test the system in the IT department before rolling it out to your company Consider bringing a few users on line first Don t try to bring the whole business up at once Get some buy in from early users A few happy test users will be very helpful in converting everyone else to happy users Train your users well If your users aren t trained they will fail and you will fail Provide at least some simple documentation for your users User s rarely read documentation but they may look at a short guide that gives them vital information quickly Install new systems or additions in off hours Test thoroughly in a test environment before deploying Test thoroughly in the production environment in off hours before deploying to users Keep clear records about hardware and software vendors maintenance agreements and contact information If parts are critical purchase spares For example at the fastest it could take a day or two to get a new or replacement interface card from Digium Stock a spare so that you can quickly respond when something goes wrong
65. types used in standard business phone systems This allows Asterisk to bridge between next generation voice data integrated networks and existing network infrastructure Asterisk not only supports traditional phone equipment it provides this equipment with additional capabilities Scenario A Busy User Asterisk can benefit a busy user who travels frequently A caller contacts the user s Asterisk system Asterisk prompts the caller for their name The caller say their name Asterisk then plays a message asking them to wait for a momen while the called party is located The Asterisk server rings the office telephone at the headquarters and at the branch office the home telephone and the cell phone of the user all at the same time If any of the phones are busy the caller is directed to voicemail If the use doesn t answer any of the phones after six rings the caller is prompted to leav a voicemail message If the user answers any of the phones the Asterisk server announces the telephone number of the calling party if caller ID is available Then the Asterisk serve plays back the name the called party recorded The user presses one on th keypad of their phone to accept the call or three to refuse the call If the use refuses the call the caller is directed to voicemail The Asterisk server sends text message to the user s cell phone indicating there is new voicemail Inter Asterisk Exchange IAX is a Voice over IP protocol specific to As
66. used to indicate a call can be dialed Dialer Equipment that sends standard dialing signals Digital Signal A signal where data is transmitted in discrete steps Digital Signal One A digital signaling rate of 1 544 Mbs corresponding and North American T1 designation Digital Signal One C A digital signaling rate of 3 152 Mbs corresponding to a North American Tlic designation Digital Signal Two A digital signaling rate of 6 312 Mbs corresponding to a North American T2 designation Digital Signal Three A digital signaling rate of 44 736 Mbs corresponding to a North American T3 designation Digital Signal Four A digital signaling rate of 274 176 Mbs corresponding to a North American T4 designation Digital Signal Zero A 64 kbs signal corresponding to the data rate of a single voice frequency equivalent channel Digital Subscriber Line A method of sending high speed digital data over a telephone circuit DNS Domain Name Server DS1 to DS4 See Digital Signal One to Digital Signal Four DSL See Digital Subscriber Line A DSP Digital Signal Processor A Due Date The date on which payment for service by the Customer is due End to End Customer Premise to Customer Premise EIGRP Enhanced Interior Gateway Routing Protocol Equal Access The provision for reaching an inerLATA carrier with an access code The right of a user to select the long distance provider or local provider of their own choice E
67. vendor like Signate is an advantage This can dramatically reduce the number of problems you will encounter and the time it will take to solve problems A Signate installation can includ a support agreement Download and compile the Asterisk software Again the details are in later chapters Add any interface boards Add the drivers for the interface boards to your Linux system Note that the Asterisk software download is always the most recent development branch You may have do download again at a later time to get a working version of Asterisk You must configure your network This may include making TFTP Trivial FTP available You will most likely need to configure DHCP Dynamic Host Configuration Protocol For more informatio about DHCP refer to RC 2131 3396 and 3397 You must configure your Asterisk server for your environment This is covered at length later in this book Configure any IP phones and IP adaptors Install any analog telephone equipment Test your system thoroughly before letting your users try it You must deliver a reliable complete working system or you will alienate your users and your project will fail Test the full system including all the connections Make sure any SIP H 323 or PSTN connections operate correctly Test all the PBX functions There are different ways to transfer calls Do they all work with all the protocols and phones you are using Does the transfer button on yourSIP phone transfer calls
68. with bug fixes new features enhancements new applications or new channel drivers Please send any suggestions about improvements or corrections to this book to asterisk signate com Asterisk is generally distributed under the terms of the GNU General Public License or GPL This license permits you to freely distribute Asterisk in source and binary forms with or without modifications provided that when it is distributed to anyone at all it is distributed with source code includin any changes you make and without any further restrictions on their ability to use or distribute th code For more information refer to the GNU General Public License The GPL does not extend to the hardware or software that Asterisk talks to For example if you are using aSIP soft phone as a client for Asterisk it is not a requirement that program be distributed under GPL For those applications in which the GNU GPL is not appropriate because of some sor of proprietary linkage for example Digium is the solely capable of licensing Asterisk outside of th terms of the GPL at their discretion For licensing outside of the GPL contact Digium Asterisk is middle ware that connects Internet and telephony technologies with Internet and telephony applications Asterisk applications connect any phone phone line or packet voice connection to an other interface or service Asterisk easily and reliably scales from very small to very large systems Asterisk supports hi
69. zero to nine any Clie atc within Tas loreCkecsg lm coils Case I any mone Om emOmnemChiatcaCters ml DOSisteInye e eUre period For example the extension _NXXXXXXX matches a regular seven digit dialed number and the extension _1INXXNXXXXXX matches the character one followed by an area code and then a seven digit phone number An ignorepat prevents dialtone from being cancelled when a specified pattern is encountered A common ignore pattern allows dialtone to be continued after the number nine is dialed ignorepat gt 9 Note that SIP phones generate their own dialtone For a SIP phone continue dialtone after dialing by reprogramming the phone Consult the manufacturer s documentation for this Applications with optional priorities or optional arguments can be associated with an extension Each of the available applications is detailed in a later section Each extension is defined with one or more lines like exten gt The components of an extension definition are an alphanumeric extension identifier used to determine the execution order the name of an application e g Dial optional arguments for the named application The dial plan associates one or more applications with an extension Multiple applications are associated with a single extension by adding additional exten lines to the configuration file The following example associates two applications dial and voicemail with extension 6
70. 0 Set Response Timeout to 10 seconds Plays a ringing signal for the calling party exten gt s 1 Ringing Here is an example exten gt _5551212 1 Answer exten gt _5551212 2 Ringing exten gt _5551212 3 Dial SIP 6710 12 tr exten gt 3 1 SetLanguage fr Set language to french exten gt 1235 1 Voicemail u1234 Right to voicemail extension 1234 Voicemail is covered in greater detail in a following chapter In the next example if there is no answer within 20 seconds the call is sent to voicemail The following dial plan implements a simple extension with voicemail The extension is numbered 600 Three commands are shown The commands are executed in order of priority The arguments 1 2 and 102 prioritize the commands exten gt 600 1 Dial Zap 9 15 exten gt 600 2 Voicemail u600 exten gt 600 102 Voicemail b600 Note there are two priorities for the voicemail transfer If the call is unanswered the second command for message u600 is executed The u600 message is the unanswered message If the line is busy th third line for message b600 is executed The b600 message is the busy message When an incoming call is directed to extension 600 Asterisk switches the call to the Zap 9 interface channel 9 of the Zaptel interface for up to fifteen seconds If the call is unanswered it is forwarded t voicemail The Dial application provides a special capability It provides separate operations for busy or unanswer
71. 00 Here is an example In this example the u specifies the unavailable message and theb specifies the busy message exten gt 600 1 Dial Zap 9 15 exten gt 600 2 Voicemail u600 exten gt 600 102 Voicemail b600 The priority field specifies the execution order of applications When a call starts applications for an extension are executed starting with the lowest priority Each higher priority application is executed i turn Applications are run in order of priority until a call ends In the example above the dial application would be executed first before the Voicemail application because the priority of 1 for the dial application is the lowest priority listed for extension 600 When call is made to extension 600 the dial application is run then the voicemail application is run Applications can add values to priorities that change the order of execution These values can cause some lines associated with an extension to be skipped or change the order of execution In the example below after the Dial application executes either 2 or 102 is executed That is after the Dial application runs one of the two voicemail commands will be selected The addition of 100 on the third line to the priority of two on the second line determines which of the two commands is executed TheDial command executes one of the two commands but either command is available after the Dial command executes exten gt 600 1 Dial Zap 9 15 exten gt 6
72. 00 2 Voicemail u600 exten gt 600 102 Voicemail b600 A goto argument can change the order of execution exten gt s 3 Goto ARG2 1 If they press return to start Asterisk applications or AGI scripts can modify priorities and thus the call flow Contexts are the central building blocks of an Asterisk dial plan An extension context is a special named section holding commands for a collection of extensions Any section that is not namedgeneral orglobals in extensions conf is a named context Asterisk contexts divide dialing plans into logical units Each context interprets numbers differently and has its own security model Most users are given access to the default context Trusted users could be given access to a context with more capabilities Contexts can contain multiple commands for each extension one command for each processing step for the extension Commands are executed in order starting with the lowest listed priority For example exten gt _9011 1 Dial TRUNK EXTEN S TRUNKMSD exten gt _9011 2 Congestion runs two commands Dial and Congestion Two formats are provided for arguments exten gt someexten priority application argl arg2 exten gt someexten priority application argllarg2 The first format is preferred as it is the most commonly used One context can be included within another context The following example includes the daytime context include gt daytime 9 00
73. 1 1 1 in binary mod Wed Nov 06 11 59 13 2002 Failed State Error To convert or program a 7960 for version 2 0 SIP download the following files from the Cisco Web site Copies of these file must be in theTFTP server directory with read and write permission for everyone TABLE 13 3 OS79XX TXT SIPDefault cnft SIPSIPmacaddress cnf RINGLIST DAT ringerl pcm ringer2 pcm P0S30200 bin Connect the phone to the network but don t power it on yet The first conversion from Skinny to SIP should be toSIP version 2 0 Trying any later version may cause problems These are the instructions for modifying the downloaded files when usingSIP version 2 0 Upgrading from version 2 0 to more recent versions is described below Edit the file OS79XxX txt The contents of this file determine if the phones will operate as SIP phones or use the Cisco call managerSkinny protocol This file must contain the name of the version of the SIP operating software you want to install on the phone In this example the contents of OS79XX txt references the filePOS30200 bin For running SIP version 2 0 the file must contain the text P0S30200 The name is case sensitive Note the image version POS30200 does not need surrounding quotes Note the name of the image inOS79x txt does not have a bin or other extension Here is the encoding of the file name in OS79XX txt the device is a phon indicates a combined image contain
74. 34 fromdomainfwd pulver com nat o SIP clients connecting to Asterisk must be defined in sip conft snomsip type frien secret bla host dynami dtmfmode inband Choices are inband rfc2833 or inf defaultip192 168 0 59 mailbox 1234 2345 Mailbox for message waiting indicato pingtel type friend username pingtel secret blah host dynamic qualify 1000 Consider it down if it s 1 second to reply callgroup 1 3 4 pickupgroup 1 3 4 192 168 0 60 cisco type friend username cisco secret blah nat yes This phone may be natted host dynamic canreinvite no Cisco poops on reinvite sometimes qualify 200 Qualify peer is no more than 200ms away 192 168 0 4 ciscol type friend username ciscol fromuser markster Specify user to pu from instead of callerid secret bla host dynami defaultip192 168 0 4 amaflags default Choices are default omit billing documentatio accountcode markster Users may be associated with an accountcode t ease billin A definition for any of these SIP clients in sip conf enables logins and calls to the asterisk server from clients exten gt 1010 1 Dial SIP ciscol 10 t A call to extension 1010 is connected to the sip client logged in as cisco1 Some phones have an indicator for example a light for waiting voicemail To enable this light put an entry insip conf like mailbox 7188 ContextInVoicemailCon The context is the context for the mailbox
75. 4 or esffor T1 or cas or ccs for E1 The coding is one of ami or b8zs for T1 or ami or hdb3 for E1 E1 lines may have the additional keyword crc4 to enable CRC4 checking If the keyword yellow follows yellow alarm is transmitted when no channels are open Here are some examples span 1 1 0 esf b8z span 2 0 0 esf b8z span 3 0 0 esf b8z span 4 0 0 esf b8z or span 3 0 0 ccs hdb3 crc4 Dynamic span definitions have the form dynamic F the name of the driver 6 95 6th the driver specific address like a MAC for ethernet the number of channels a timing priority like for a normal span Use a value of zero to not use this as a timing source You can prioritize them as primary secondary etc Note that you MUST have a REAL zaptel device if you are not using external timing The definitions for using the channels are next The format is eT Valid devices are Channel s are signalled using E amp M signalling specific implementation such as Immediate Wink or Feature Group are handled by the userspace library hannel s are signalled using FXS Loopstart protocol hannel are signalled using FXS Groundstart protocol s s are signalled using FXS Koolstart protocol Cc C Channel G are signalled using FXO Loopstart protocol ie hannel are signalled using FXO Groundstart protocol S S S L L hannel L Channel are signalled using FXO Koolstart protocol Channel
76. 544 000 bps 1 544 Mbps The standard frame is 193 bits long 1 framing bit 24 8 bit time slots Each time slot is scanned at the rate of 8000 times per second as in D4 SF The line rate is 1 544 Mbps and supports a data peylo of 1 536 Mbp Signalling states are transported within a Superframe This is required to support Switched voice or data service Signals are sent with a Robbed Bit bit 8 of each channel s time slot is robbed to indicate a signaling state in the 6th and 12th frames Effective throughput for the A signaling bit Frame 6 is 666 66 BPS Effective throughput for the B signaling bit Frame 12 is the same 666 66 BPS An Extended Superframe consists of twenty four 193 bit frames There are three types of framing bits Frame Pattern Sync FPS Datalink DL and CyclicRedundancy Check CRC bits Of the 8 kbs framing bit bandwidth 4 kbs is allocated to the Datalink 2 kbs is allocated to the CRC 6 characte and 2 kbs is used for synchronization purpose ESF Extended Superframe Signaling uses a Robbed Bit Each channel s timeslot is robbed to create a signaling in the 6th 12th 18th and 24th frames Effective throughput for the A signaling bit Frame 6 is 333 33 BPS Effective throughput for the B C and D bits is the same 333 33 BPS After your Tl provider drops the Tl into your premises they may then hand you a CSU DSU or a router This router will have a Tl connection on the back The router contain
77. 666 gt channel gt 3 callerid Pac Tel Phone lt 256 428 6124 gt Cchannel gt 4 callerid Uniden Dead lt 256 428 6125 gt Cchannel gt 5 peallerid Cortelco 2500 lt 256 428 6126 gt Cchannel gt 6 callerid Main TA 750 lt 256 428 6127 gt channel gt 44 For example maybe we have some other channel which start out in a different context and us E amp M signalling instead j context remot Sigalling e Cchannel gt 15 Cchannel gt 16 Signalling em_w All those in group 0 I ll use for outgoing calls Strip most significant digit 9 before sending i stripmsd 1 callerid asreceived 7 group 0 Signalling fxs_ls gt 45 Signalling fxo_ls group 1 calle Joe Schmoe lt 256 428 6131 gt channel gt 25 callerid Megan May lt 256 428 6132 gt channel gt 26 callerid Suzy Queue lt 256 428 6233 gt channel gt 27 callerid Larry Moe lt 256 428 6234 gt channel gt 28 SamplePRI CPE config Specify the switchtype the signalling as either pri_cpe or pri_net for CPE or Network termination and generall you will want to create a single group for all channels of the PRI switchtype nationa Signalling pri_cp group channel gt 1 23 signalling pri_cpe switchtype dms100 group 1 context main cha gt 1 23 signalling fxo_ks context inside chan gt 25 28 The following example sets up four zaptel channels with u
78. Asterisk server anywhere on thelnternet They will register with their home PBX and instantly route calls appropriately IAX is extremely low overhead IAX has four bytes of header as compared to at least 12 bytes of header forRTP based protocols like SIP and H 323 IAX control messages are substantially smaller IAX supports internationalization A requesting PBX or phone can receive content from the providing PBX in its native language IAX supports authentication on incoming and outgoing calls Asterisk provides fine grained control over access Limits can be placed on access to only specific portions of the dial plan With IAX dial plan polling the dial plan for a collection or cluster of PBX s can be centralized Each PBX only needs to know its local extensions and can query the central PBX for further information as required SIP is the IETF standard for VoIP SIP is described at greater length in a following chapter SIP control syntax resembles SMTP HTTP FTP and other IETF protocols SIP runs over TCP IP and manages Real Time Protocol RTP sessions RTP transfers the data for a VoIP session SIP is the emerging standard in VoIP because it is simple compared to other protocols like H 323 and human readable The AsteriskSIP interoperates successfully with multiple vendors including SNOM and Cisco H 323 is the ITU standard for VoIP Support for H 323 in Asterisk was contributed by Michael Mansous of InAccess Networks http www ina
79. Asterisk working as a client can recieve calls from a remoteSIP server A client must register with a server if the client is to accept calls from the server and the client appears on a dynamic IP address The following entry insip conf at the server specifies that different calls from a client may arrive on different IP addresses host dynami To use Asterisk as a of SIP client when the IP address is dynamic add a register definition to sip conf in the section general of the client This registration informs the remote server of the location of your Asterisk client This is how the remote serve knows how to forward calls to your Asterisk client register gt user secret authuser host port extension This registers the extension 2345 at the SIP provider asipprovider as the local extension 1234 register gt 2345 password asipprovider com 1234 use the user id for this SIP server ex 2345 authuser an optional authorization user for theSIP server secret is the user passwor host is the domain or host name for theSIP server This SIP server must have a corresponding definition in a separate section of sip con titledmysipprovider com 1234 the Asterisk extension used for incoming calls This must appea in extensions con The configuration at the SIP server accepting this registration would be mysipprovider com type pee secret passwor username 234 hostsipserver mysipprovider com fromuser 2
80. Categorization for CDR records Choices are default omit billing documentation See Asterisk billing canreinvite If the client is able to supSIP re invites context Context in the dial plan for outbound calls from this client defaultip Default IP address of client host is specified as DYNAMIC Used if client have not been registred at any other IP adress dtmfmode How the client handles DMIF signalling fromuser Specify user t from instead of callerid host How to find the client IP or host name In case of DHCP networks use the keyword dynamic nat This variable changes the behaviour of Asterisk for clients behind a firewall This does not solve the problem if Asterisk is behind the firewall and the client on the outside mVoicemail extension for message waiting indications qualify Check if client is reachable secret PasswordSIP client A shared secret md5secret MD5 Hash o asterisk can be used instead of Secret type Relationship to client outbound provider or full client username Login nameSIP client restrictid yes no To have the callerid restricted gt sent as ANI language A language code defined in indications conf defines language for prompts and specific local phone signals incominglimit and outgoinglimit Limits for number of simultaneous active calls SIP client Asterisk can function as a SIP client In this case SIP calls can be directed from some outside SIP server to your Asterisk server
81. D ROM CD RW DVD RW USB Ports USB 1 USB 2 unNber MoE USE Ports onitor Type Ona Ona oneZe Keyboard ouse tenance Contract ID tenance contract expires tance Contact Name tance Contact Telephone Number Panice sCOntacem Hous tance Contract agreeed response time Linux Version Linux Provider TABLE checklist 8 Network Equipment Provider company name Provider comapny contact Contact Phone number Contact email Contact cell phone number Equipment Type router switch Model Power over Ethernet TABLE checklist 9 Electrical Provider company name Provider comapny contact Contact Phone number Contact email Contact cell phone number Required service size Circuit completed and tested Outlet within five feet of equipment UPS Required UPS Model Available standby time TABLE checklist 10 Telephones Provider company name Provider comapny contact Contact Phone number Contact email Contact cell phone number Telehpone Model Desciption e g for speaker phone Analog or IP SIP Version Installed SIP Version Availalbe Service contract number Service contract end date Service contact name Service contact hours
82. FXS Only a single line is required to configure each interface For example fxsks 1 fxoks loads the FXO device as channel one and the FXS device as channel two Today s PC motherboards feature a variety of PCI slot types Here for example is a picture of a typical dual processor motherboard with varying types of slots PewewsL ete ND Te biGbial a e Trs ee ee ee somes edm p pen es BSNS epy ypo SIT EREITIS betes ee z0r tuwewess DN ee es ee er TeECASE2RIDiA LSE Figure 08 6 Sample Motherboard The following table calls out the PCI and AGP slots shown on the motherboard above Each of the slots provides different interfaces The top slot shown in the illustration is the AGP Pro slot slot number zero AGP Pro Slo 64 bit 5 0 volt 64 bit 3 3 volt 32 bit 5 0 volt 2 32 bit 5 volt Se S2 pit 5 0 wolt PCI Slo Note that the different types of slots have a different physical configuration Boards are keyed to fit into the correct type of slot The TE410P is a 32 bit 33MHz card keyed for 3 3 volt operation This means that in the mother board pictured here the TE410P will only fit into Slot 2 The TE410P will not fit into Slots 1 3 4 or 5 The TE405P is a 32 bit 33MHz card keyed for 5 0 volt operation This means that in the mother board pictured here the TE405P will fit into Slots 1 3 4 and 5 The TE405P will not fit into Slot 2 Note that Digium cards will operate well in most countries
83. IP address Press the Save soft button to save your changes For phones up to SIP version 4 1 pressing the three keypad buttons x x will lock or unlock the phone To see if the phone is locked or unlocked press the settings key use the arrow key under the display to select Network Configuration and press the button at the bottom of the display labeled Select The padlock shown at the right end of the top display line shows as locked or unlocked For phones running later versions of SIP versions 4 2 and later select the menu item Lock Config to lock or unlock the phone You will require a password to access this item The default Password i cisco Through version 4 1 exiting the settings menu will lock the phone Rebooting locks the phone You may have a 7960 locked with an unknown password You may be able to change the unknown password From the keypad try to change the AlternateTFTP address in the phone Network Configuration DHCP settings to yes Enter the IP address of your TFTP server The configuration file SIP MAC Address cnf has a phone _ password entry Changing this entry to the password of your choice may change the password for the phone At the time of writing SIP files for the Cisco 7960 were stored at http www cisco com cgi bin tablebuild p sip ip phone7960 You will need an authorized login and password to access these files Some of the available files are shown in the following table Th
84. ISDN international InternationalISDN pridialplan nationa f F n 7 f Overlap dialing mode sending overlap digits overlapdial ye Signalling method default is fxs Valid values em E amp M em w E amp M Wink featd Feature Group D The fake Adtran style DTMF featdmf Feature Group D The real thing MF domestic US featb Feature Group B MF domestic US Exs Is FXS Loop Start fxs_gs FXS Ground Start fxs_ks FXS Kewl Start fxo_ls FXO Loop Start fxo_gs FXO Ground Start fxo_ks FXO Kewl Start pri_cpe PRI signalling CPE side pri_net PRI signalling Network side st SF Inband Tone Signallin sf_w SF Win sf_featd SF Feature Group D The fake Adtran style DIMF sf_featdmf SF Feature Group D The real thing MF domestic US sf_featb SF Feature Group B MF domestic US The following are used for Radio interfaces fxs_rx Receive audio COR on anFXS kewlstart interface FXO at the channel bank fxs_tx Transmit audio PTT on anFXS loopstart interface FXO at the channel bank fxo_rx Receive audio COR on anFXO loopstart interface FXS at the channel bank fxo_tx Transmit audio PTT on anFXO groundstart interface FXS at the channel bank em_rx Receive audio COR on an amp M interface l way em_tx Transmit audio PTT on an amp M interface l way em_txrx Receive audio COR AND Transmit audio PTT on an amp M interface 2 way em_rxtx same as em_tx
85. Inter Asterisk Exchange IAX IAX allows calls to be switched between Asterisk systems or devices In addition IAX allows dial plans to be shared combined or centralized IAX is a community effort not a standardization effort Why was a new proprietary protocol developed IAX supports the following functions that are not available with SIP or H 323 Interoperability with NAT PAT Masquerade firewalls AX seamlessly interoperates through all sorts ofNAT and PAT and other firewalls including the ability to place and receive calls and transfer calls to other stations IAX uses a single UDP port IAX uses port 5036 and IAX2 uses port 4569 This assures that IAX works well withNAT High performance low overhead protocol When running on low bandwidth connections or when running large numbers of calls optimized bandwidth utilization is imperative AX uses only 4 bytes of overhead Internationalization support AX transmits language information so that remote PBX content can be delivered in the native language of the calling party Remote dial plan polling AX allows a PBX or IP phone to poll the availability of a number from a remote server This allowsPBX dial plans to be centralized Flexible authentication IAX supports cleartext md5 and RSA authentication providing flexible security models for outgoing calls and registration services Multimedia protocol AX supports the transmission of voice video images text HTML DTMF a
86. N for telephone service you should determine the percentage of time your users are on telephone calls Count the number of telephones in the office including conference rooms and fax machines Try and find out the usage patterns for the phones Is there ever time when everyone has to be on the phone If not fewer than the 23 channels may be enough for you office and you can rent a partial T1 Asterisk uses a CODEC Compessor Decompressor to change an analog voice signal into a digital data stream and back Several different CODECs are supported You can select the CODEC yo want to use This process is described later For calling over the Internet or LAN you must have network connectivity and sufficient bandwidth Each telephone conversation will consume from 45 to 150 Kilo bits per second of bandwidth depending on sound quality At 50Kbs call quality is comparable with a cell phone At 75 Kbs call quality can rival a land line call The CODEC selection determines how many calls can be sent over your Internet connection John Todd an accomplished Asterisk consultant has tested various CODECs John has graciously permitted the inclusion of his results here TABLE 04 1 CODEC Bandwidth Requirements CODEC Estimated Calls perMbs John s Comment eo TLL 15 A ulaw ILBC A Users may not be pleased with the voice quality A You may find that after you have purchased your hardware purchasing installation for your Aterisk system from a
87. P MGCP andSIP There are proprietary protocols like the Cisco Skinny protocol More protocols will appear in the future to address new needs There is no need to standardize on a single call control protocol These protocols enable standards for applications at the call control layer With the open protocols applications from different vendors ar interoperatble Asterisk operates with many of these protocols includingSkinny H 323 is currently the most widely deployed VoIP call control protocol H 323 is not robust enough to use in a system that can compete with the SS7PSTN SIP is the most likely packet based competitor to SS7 H 323 is an International Telecommunications Union Telecommunications Standardization Sector ITU T specification for transmitting multimedia traffic including video and voice over an IP network H 323 works with other existing standards like Q 931 Compliant vendor products an applications can communicate with each other via this protocol H323 is complex It s not easy to create H 323 applications H 323 applications do not scale well H 323 comprises the following components and protocols TABLE 16 1 H 323 Protocols Feature Protocol 3225 245 Genl Sikepna aime Media Control 26l Bo 253 120 Media Transport RTP RTCP Video Codecs H H Audio Codecs Goi C I22 ois C728 Go I29 Il T Data Sharing H 323 elements include terminals gateways gatekeepers and multipoint control units
88. Phone Label Text desired to be displayed in upper right corner phone_label cPC 7 Has no effect on SIP messaging Line 1 Display Name Display name to use forSIP messaging linel_displayname 4035 Phone Prompt The prompt that will be displayed on console and telnet phone_prompt SIP gt Limited to 15 characters Phone Password Password used for console or telnet login phone_password cisco Limited to 31 characters Default cisco User classifcation used when Registerin none default phone ip user_info non Once the telephones are running the correct version of SIP and are configured correctly configure Asterisk for these phones You must modifysip conf for use with the two phones Here is a sample configuration file for two SIP telephones at extensions 4009 and 4035 This configuration directs calls on the incomingSIP channel to the from sip context in the dial plan general port 5060 TheTCP IP port for SIP communications 4035 type friend This device takes and makes calls username 4035 secret cisco context from sip Ca Bill lt 415551212 gt qualify 100 host dynamic This host is not on the same IP addr every tim canreinvite n mailbox 4035 Activate the message waiting lightfor message defaultipi92 160 0 12 4009 type friend This device takes and makes call username 400 secret cisc context from si callerid Paul lt 4155551212 gt qualify 100 h
89. R extensionemail S MACRO_EXTEN exten gt s 3 rxfax FAXFILE exten gt s 103 SetVar EMAILADDR defaultuser example com gt s 104 Goto 3 exten fax exte gt 2201 1 Macro faxreceive exten gt 2202 1 Macro faxreceive exten gt 2203 1 Macro faxreceive exten gt h 1 system usr local sbin mailfax FAXFILE EMAILADDR S CALLERIDNUM CALLERIDNAME I m using a shared analog line for testing this so I m using the fax autodetection code to yank faxes out of IVR and into the fax pseudo extensio outside exten gt fax 1 Goto fax 2201 1 Finally here s usr local sbin mailfax bin sh FAXFILE 1 RECIPIENT S2 FAXSENDER 3 tiff2ps 2eaz w 8 5 h 11 SFAXFILE ps2zpdt mime construct to SRECIPIE Fax from SFAXSENDER attachment fax pdf type application pdf file In Debian tiff2ps comes in libtiff tools ps2pdf is part o Ghostscript and mime construct is its own package To set the email address associated with each extension do databas put extensionemail EXTENuser example com If you are in your office on a support call You want to transfer the call from your office to the computer room phone You can park the call hang up your office phone go to the computer room and then pic up the call there You can transfer a call to a special extension where the call is parked The call is hel at that extension until you pick it up again the caller hangs up or the call
90. Register with another IAX server server named tormenta username marko and password secretpass regist gt marko secretpass tormenta linux support net Register joe at remote host with no passwor register gt joe remotehost 5656 Register marko attormenta linux support net using RSA key torkey register gt marko torkey tormenta linux support net In this example the dial plan of the client has an entry that switches the incoming calls to the server namedcpc and the context named tcom exten gt 1833 1 Dial IAX2 tcom mysecret cpc EXTEN As shown below for the server to accept the incoming call the server iax conf file must include a context named tcom tcom type frien username tco secret mysecre context defaul host dynami Because the host is listed as dynamic an IAX connection is opened whenever it is used This connection will stay open across any NAT devices for the duration of a call Note that the IAX configurations at IAX client and the IAX host should correspond For example the following entry in the general context of both ax conf files supports a low speed connection disallow all allow gs IAX 1 1C user name authorization password host to connect to port at host extension to dial optional context at peer a for autoanswer IAX mark asdf myserver 6275 defaul IAX iaxphone s IAXguest misery digium com TAX username if known apparent hos
91. T1 line isn t working You may be able to get a businessDSL line with a SLA Many carriers are now providing DS 1 circuits over HDSL lines with a single pair of copper wires This is a less expensive alternative toT Carrier circuits and does not require repeaters Frame over DSL is usually less expensive than a T1 line Frame over DSL replaces the T Carrier described below portion of the network It is easier to manage but the management services that ar available are not as extensive It is more difficult to get a good SLA with this technology This service is becoming more widely available It was initially used for slower speed connections but is now becoming more commonly available at T1 speeds Frame overDSL isn t available in all locations because DSL isn t available at all locations There are other connections available as well for example 802 11 wireless wireless T1 or licensed wireless connections like microwave You might have fiber optic connections available in your neighborhood from your phone company or another company These can provide very fast connections Some connections like a dialup connection are not as suitable for VoIP Cable modems usually do not have enough speed from you to thelnternet A cable connection may provide enough bandwidth for a single conversation A Satellite connection is only palatable when there is no other alternative Most satellite connections provide little bandwidth from you to the s
92. Transfer or consultative transfer No Answer Call Forwarding Implemented in the dial plan Busy Call Forwarding Implemented in the dial plan Single Line Extension 3 way Calling usually implemented by the phon Incoming Call Screening Implemented in the dial pla Find Me Call Pickup Standard in Asteris Outgoing Call Screening Implemented in the dial pla Automatic Redial Implemented in the dial plan with some AGI suppor Manual Redia Do not disturb DND Message waiting MWI Standard in Asterisk requires support on th phon Call waiting indication Standard in Asterisk requires support on th phon Call Hold Implemented by the phone Unattended Transfer or blind transfer Consultation Hold Implemented by the phon Attended Transfer or consultative transfer No Answer Call Forwarding Implemented in the dial plan Busy Call Forwarding Implemented in the dial plan Single Line Extension 3 way Calling Iimplemented by the phon Incoming Call Screening Implemented in the dial pla Find Me Call Pickup Standard in Asteris Outgoing Call Screening Implemented in the dial pla Automatic Redial Can be implemented in the dial plan with AGI suppor Manual Redia Do not disturb DND Message waiting MWI Implemented in Asterisk requires support fro the phon Manual Redial Normally implemented by your phone Unattended transfer or blind transfer Implemented in Asterisk Attended transfer Implemented in Aste
93. XXX 102 Busy exten gt _1866NXXXXXX 1 Dial PRITRUNK1 EXTEN 1 exten gt _1866NXXXXXX 2 Congestion exten gt _1877NXXXXXX 102 Busy The following entry will detect and transfer an incoming fax exten gt fax 1 Dial SIP atal 2 20 laxtel com allows Asterisk users and IAX clients to connect with each other over the Inter Asterisk eXchange protocol and thelnternet instead of the PSTN Once registered with IAXtel each user gets a 1 700 telephone number that rings their AX compatible client from anywhere on thelnternet You can register for an AXtel number athttp www iaxtel com Here is a sample dial plan for making outgoing calls over IAXtel Calls to IAXTEL 1700NXXXXXX iaxtel exten gt _1700NXXXXXX 1 Dial IAX2 username password iaxtel com S EXTEN iaxtel Various PBX functions are implemented as applications or a combination of applications Music on Hold Standard in Asterisk Call Parking Standard in Asteris Call Pickup Standard in Asteris note that 8 is defined in res_parking Call Recording Using the Monitor applicatio Conferencing Using the MeetMe applicatio IVR Standard in Asterisk with applications note you can employ AGI or EAGI if even more control is neede Call Hold Normally implemented by the phone Unattended Transfer or blind transfer Implemented in Asterisk or optionally in the phon Consultation Hold Normally implemented by the phon Attended
94. a Company maintains a Terminal Location for purposes of providing service POP See point of presence Primary Interexchange Carrier The IEC that One Plus Dialing calls are routed through PRI See Primary Rate Interface Primary Rate Interface A type of ISDN interface providing 23 bearer channels and 1 data channel Private Line A dedicated circuit connecting customer equipment at both ends of the circuit The private line does not include any Switching services Provisioning The process of designing implementing and tracking the fulfillment of a service order Promotion Periodic financial inducement offered by the Company to new and or existing Customers of service to subscribe to and use new or additional service s PSTN Public Switched Telephone Network Public Branch Exchange A telephone system within an enterprise that switches calls between enterprise users on local lines and allows all users to share external phone lines APBX saves the cost of every user having a line to the telephone company In older usage a private telephone switchboard that provided on premises dial services Public Utilities Commission An agency that regulates intrastate telecommunications services PUC See Public Utilities Commission Pulse Code Modulation A signal is sampled then the magnitude with respect to a fixed reference of each sample is quantized and digitized QoS Quality of Servic
95. a book without the enormous help and support of Mark Spencer and Digium James Lyons Matthew Nicolson Mat Fredrickson John Bigelow and Mike Wood at Digium Technical support deserve special thanks for the many hours of patient help They should get a medal Gre Vance was always there to help Thanks to David Edison and Daryl Jones for making it all possible Thanks to Warren Woodford for creating an Asterisk ready distribution of Mepis John Todd contributed very valuable technical material The reviewers Matt Florell Mike Diehl and Tom Scott did an especially good job of finding and fixing many of my mistakes and adding new material This book is much much better because of thei hard work am especially grateful for their help Thank you so much everyone John Bigelow Bill Boehlke Malcom Davenport Mike DiehlA David Edison Matt Florell A Mat Fredrickson Chris Hariga A Dr Lewis Heniford Amal Johnson A Daryl Jones James Lyons A Matthew Nicholson Mike Pechner A Marcelo Rodriguez Tom Scott A David Schlossman Mark Spencer A John Todd Greg Vance A Mike Wood Warren Woodford Telephony uses an old and inefficient model Academics and researchers have shared their work for centuries Scientists publish new discoveries in journals Imagine where mankind would be if peopl had been unable to build on the knowledge of others Yet this is the mentality on which proprietar telephone systems have depended Traditional
96. a complex environment Security issues and securing your Asterisk server are very important Some of these issues are addressed here First the network physical and network environments that the Asterisk server is in must be secure The server must be physically secure and protected from intrusion or disaster including fire or flood The network that the Asterisk server is attached to must be secure If the network becomes unavailable the Asterisk server is unusable even if it s not because of the Asterisk server itself As described earlier in this book TCP ports may have to be opened for SSH and TFTP It is safer to run Asterisk behind a firewall Here is a sample configuration for a Linux IPtables firewall SIP on UDP port 5060 Other SIP servers may need TCP port 5060 as well A INPUT p udp m udp dport 5060 ACCEP IAX2 the IAX protoco A INPUT p udp m udp dport 4569 j ACCEP IA A INPUT p udp m udp dport 5036 J ACCEP RTP the media stream A INPUT p udp m udp dport 10000 20000 ACCEP SSH Secure shell session A INPUT p tcp m tcp dport 22 J ACCEP Asterisk implements SIP MD5 digest authentication The MD5 algorithm produces 128 bit fingerprint or message digest of an input The MD5 spec states It is conjectured that it is computationally infeasible to produce two messages having the same message digest or to produce any message having a given prespecified t
97. after a segmentation violation h Displays basic command line help i Forces Asterisk to prompt for cryptographic initialization passcodes at startup n Disables ANSI color support p Run with a real time priority q Run in quiet mode v Runs Asterisk in verbose mode More v s produce more verbose output x Executes a command in Asterisk when combined with r r Connect to Asterisk running in the background and present a command line interfac Xi In combination with r execute an Asterisk CLI comman n Disable ANSI colour suppor The following commands are available from the asterisk command line 1A abort halt A add extension A add ignorepat A add indication A answer A autoanswer A database del A database deltree A database get A database put A database show A debug channel A A dial Execute a shell command Cancel a running halt Add new extension into context Add new ignore pattern Add the given indication to the country Answer an incoming console call Sets displays autoanswer Removes database key value Removes database keytree values Gets database value Adds updates database value Shows database contents Enable debugging on a channel Dial an extension on the console dont include A dump agihtml A exit A extensions reload A hangup A help A iax2 debug A iax2 no debug A iax2 set jitter A iax2 show cache A iax2 show channels A iax2 show peers A iax2
98. ailure e Transfer and terminate SIP supports a variety of intelligent network services These include e Call Hold Consultation Hold Unattended Transfer Unconditional Call Forward Call Forward on Busy Call Forward on No Answer Three Way Conferencing Single Line Extension Find Me Incoming Call Screening Outgoing Call Screening Secondary Number In Secondary Number Out Do Not Disturb Call Waiting e AA F FHF HF F SIP was designed to support multimedia conferencing SIP also supports multimedia conferencing multipoint conferencing and call control for conferencing SIP enables instant messaging and instant communications SIP is a powerful general protocol for establishing interactive communications sessions SIP provides facilities for initiating modifying and terminating interactive communications sessions SIP is not a resource reservation or prioritization protocol There is no Quality of Service QOS support inSIP SIP is not a data transport protocol SIP is not designed for managing interactive sessions after the sessions have been established SIP is not designed to replace all the features and services provided by the PSTN Many of the Class 5 features are not needed in the context of the Internet Some features are provided by other protocols besidesSIP SIP elements are User Agents Servers and Location servers User Agents are the endpoints of a SIP network User Agents o
99. all Commercial Service A switched network service involving dial station originations for which the Customer pays a rate that is described as a business or commercial rate in the applicable local exchange service tariff for switched service Competitive Local Exchange Carrier Companies that compete locally for telecommunications services for example telephone Internet access cable TV etc Common carrier A telecommunications company that provides communications transmission services Computer Telephony Integration The extension of computing over the telephone network to a telephone or access to telephony from a computer Contract Tariffs Rates and services contracted with an individual customer but available to all customers of the operating company Country Code Two or three digits used to identify the foreign destination country of a telephone call Customer The person firm corporation or other entity which orders service and is responsible for the payment of all charges for service and for compliance with Company contract and tariff requirements The term customer includes a person firm corporation or other entity that either knowingly or unknowingly accesses service and completes a communication over the Company s network Fo Resp Org Service theCustomer is the person firm corporation or other entity that selects or is directed to select the Company as the Responsible Organization Resp Org
100. also easily detect fals hangups The symptoms of this is being disconnected in the middle of a call fo n reason callprogress ye 7 Select which class of music to use for music on hold If not sp cifie then the default will be used musiconhold defaul PRI channels can have an idle extension and a minunused number So lon 7 as at least minunused channels are idle chan zap will try to call 7 idledial on them and then dump them into the PBX in the idleext extension which is of the form exten context When channels ar neede the idle calls are disconnected so long as there are at least minidle calls still running of course to make more channels available Th primary use of this is to create a dynamic service where idle channel j are bundled through multilink PPP thus more efficiently utilizin combined voice data services than conventional fixed mappings muxings idledial 699 idleext 6999 dialou minunused minidle Configure jitter buffers in zapata each one is 20ms default is 4 jitterbuffers Each channel consists of the channel number or range I inherits the parameters that were specified above its declaratio callerid Green Phone lt 256 428 6121 gt channel gt 1 callerid Black Phone lt 256 428 6122 gt channel gt 2 callerid CallerID Phone lt 256 428 6123 gt callerid CallerID Phone lt 630 372 1564 gt callerid CallerID Phone lt 256 704 4
101. ample if xmms mplayer xine esd or other similar applications are already running Asterisk ma have problems with sound playback To start Asterisk manually from the command line open a command prompt and enter the command asterisk vvvv The string of v characters specifies verbose messages The option c opens a console the lower case p options specifies a real time priority Asterisk vvvvcp displays all possible debugging information After this command Asterisk will start and the console will start After Asterisk successfully starts you will be left at the Asterisk command prompt To stop Asterisk enter the comman stop no The option f will prevent Asterisk from forking a separate process This is useful when starting Asterisk with an entry in inittab For example ax 2345 respawn usr sbin asterisk vvvcf Starting Asterisk from init will cause Asterisk to automatically restart if it stops for any reason When Asterisk is successfully running from extension 4035 dial extension 4009 Many messages should display at the Asterisk console The phone at extension 4009 should ring Confirm at the console that the client phones are registering with the Asterisk server If the call is immediately directed to the busy message a phone client has most likely not registered with the Asterisk server If the registry interval is set to more than fifteen seconds it will take at least fifteen seconds after Asterisk starts befo
102. an togglable E1 T1l 3 3 volw ICI welll wet 4xxp Quad span togglable E1 T1l 5 0 volr PCI intl wcfxs Quad Station FXS or FXO wct1xxp Saline lle Sjosiin Ail wct1xxp Saline le Sjorelin mil wcfxo Single port FXO Note that the order that the drivers are loaded will determine the channel assignments of the drivers You must load the drivers in the appropriate order For example if you have a T100P board and a X100P board and you could load the drivers wit modprobe wct1lxxp modprobe wcfx To see errors produced by the modprobe command use the command dmesg Other helpful error related information is avalable in any of the files created in the directory proc zaptel This command an these files can help you diagnose errors in the zaptel configuration process for example boards tha have not been provided with power or drivers that are loading in the wrong order With FXO or FXS adaptors channels appear in the order the drivers are loaded For example if you have a single portFXO card and a USB single port FXS interface you would load the FXO driver and then the USB driver TheFXO driver would be channel one and the USB FXS would be channel two The T100P board has twenty four channels the X100P board has one channel Loading the driver for the T100P driver first causes the first twenty four channels to be assigned to the T100P board an channel twenty five to be assigned to the X100P board Note that zaptel conf must configure a
103. annels are used to route calls in and out of an Asterisk server over IP with Session Initiation Protocol A call can come in to an Asterisk server through aSIP channel or leave the Asterisk server outbound to thelnternet through a SIP channel All calls arrive on a channel Even internal calls For example a legacy analog telephone can be directly connected to an Asterisk server with the appropriate Digium interface board When the user picks u the handset a channel is activated The user s call then flows through the activated channel The dia plan determines what should happen to this call for example dialing another internal number ove another analog channel or dialing an outside telephone number or accessing voice mail Asterisk uses a channel driver typically named chan_xxx so to support each type of channel An Asterisk channel is specified in this way Technology is one of installed channel modules i e SIP IAX IAX2 MGCP or Modem The format of the Dialstring depends on the type of channel selected The standard distribution includes the following interface types SIP Session Initiation Protocol IETF IAX Inter Asterisk Exchange protocol vl and v MGCP Media Gateway Control Protocol Megaco IET ZAP Zapata channel Modem Modem channels Incl ISDN Skinny Skinny channels Cisco phones Voice over Frame Relay Adtran styl console Linux OSS console client driver for sound cards dev ds vbp VoiceTronix In
104. arameters found inSIPDefault cnf in the phone specific files If you want to upgrade all the phones on your system to a different version ofSIP change the image_version parameter shown inSipDefault cnf Change the SIP image named in OS79XX txt too Save a copy of SIPDefault cnf under a different name This is because you are about to remove part of the file that you will need when upgrading to later versions Edit SIPDefault cnf Remove all the lines that apply to versions later than version 2 0 If you don t do this the phone will produce an error as it initializes Press thesettings button to view the menu choices The error message can be viewed in the Status messages selection reached through the statu menu item Thestatus button is a soft key In addition each phone must have a corresponding unique individual configuration file Parameters in the phone specific file will override parameters in the generic configuration file Save a copy of the original file SIPmacaddress cnf Make a copy of the file SIPmacaddress cnf for each 7960 phone Every telephone must have a file with the formatSIP MAC_Address cnf available in the TFTP data directory for example SIP002094D245CB cnf Note this file name is all in upper case letters The MAC address in the file name must be capitalized The file must have read permissions for all users that is chmod 666 The MAC address of the phone is on a sticker on the phone bottom You can display
105. arget message digest The MD5 algorithm is intended for digital signature applications where a large file must be compressed in a secure manner before being encrypted with a private secret key under a public key cryptosystem such as RSA Remove all unneeded modules from your Asterisk server For example if you are only doing ZAP and SIP then specify noload for MGCP and Skinny in modules conf This will streamline your system and reduce the risk of exploits Don t allow users to login to your Asterisk server Most recent kernel exploits required local user access Don t allow file sharing or other user services on your Asterisk server Extension contexts should isolate outgoing or toll services from any incoming extensions Don t allow access to outgoing or toll services in contexts that are accessible from incoming channels Configur your dial plan to isolate outgoing and toll service calls from any incoming connections Never allow outgoing toll services in the default context Remove the demo context from the default context Always include the default context within other private contexts with the command include gt default Any channel that can enter an extension context that it has the capability of accessing any extension within that context is a potential problem A channel or incoming line that is allowed to access a extension context where that extension context can in turn access any other context can access a
106. atellite There is a very long annoying delay on a satellite call as much as two or three seconds between when you say something and when the calling party hears it This delay comes in part from the 22 50 miles the signal has to travel up to and back from the satellite There are other propagation delays i the system The voice quality of a SIP call depends on the available bandwidth and the reliability of the connection IAX is probably preferable to SIP for Satellite traffic This chapter will help you design an Asterisk system for your enterprise This chapter will assist you in designing your system sizing your system and selecting the appropriate hardware and communication links You may want help installing configuring monitoring and maintaining your Asterisk system Signate provides Asterisk design installation integration training and management services anywhere in th world You can reach Signate atwww signate com by telephone at 415 442 4011 or my email at support signate com At the time of writing the following vendors specialize in providing hardware from Digium and other supplies for use with Asterisk Systems APB International APB international specializes in the distribution of high end technology products including Voice over IP solutions based on Open Standards for converged data and voice communications The company serves resellers in North an South America www abptech com 972 745 1220 Cy
107. axes on a call if two out of the three following conditions are met the call originates in the state the call terminates i the state or the call is billed within the state Station Telephone equipment from or to which calls are placed Station to Station A directly dialed call where no operator is used Subscriber The ultimate user of the PSTN Surcharge A charge that is in addition to the normal base charge Switch A telecommunications product that connects incoming data to the correct destination Switched Access Non dedicated access between a user and their local carrier Switched Access Service A class of LEC services providing switched services from a customer s premises to the IEC An service consisting of an occasionally connected circuit between a Customer Premises or serving telephone company central office anda Company terminal available to the Customer on a usage shared basis which is used for the origination or termination of service Switched Reseller Resellers selling services with their own hardware Switching Fee A per line fee imposed by a LEC to reprogram their switch when a user changes to a new carrier This fee is usually paid when a user changes to a reseller Switchless Reseller A reseller of long distance services that does not own or operate its own switches or lines Synchronous Optical Network A standard for optical telecommunications data transport developed by t
108. bers and connections Alternate carriers often rent at least part of their network for example the wires to you premises from your local telephone company A direct connection to the PSTN can be a larger connection for example a T Carrier connection or some other even larger connection Digium cards interface withT Carrier lines Your telephone numbers are associated with this connection Calls to your telephone numbers are routed to you Asterisk server over the T Carrier connection A T Carrier connection provides multiple channels A T1 line provides 24 voice channels If you have twenty four users in your office and twenty four telephone numbers and a T1 line every user has a available line This means twenty four incoming or outgoing calls can be placed concurrently There can be more telephone numbers or users than circuits You can have more telephone numbers thanT Carrier channels If you have fifty telephone numbers and a T1 circuit calls to any of the fifty numbers can be sent over any of the twenty three T1 channels to your Asterisk server The world wid telephone system has many more users than channels That s why you get a busy signal after an emergency when everyone is trying to get a channel The service provided with a T Carrier line signals what number is ringing This allows Asterisk to appropriately route the incoming call In addition to a telephone number and connections telephone companies provide additional services
109. body of prescribed rules governing the offering and furnishing of service including general and service specific terms contained in this tariff as supplemented by any additional or alternative terms in a contract TFTP See Trivial FTP Third Party Billing Use of an outside provider for bill processing Time of Day Routing Call routing based on the time of day Used to reduce the cost of calls Toll A charge for a telephone call Toll Call A call that has an incremental charge Toll Fraud The illicit access to long distance services Transmission Control Protocol A reliable protocol for moving packets of data often over an IP network Trivial FTP Trivial File Transfer Protocol a simple implementation of FTP TFTP uses UDP and has no security features TFTP is used to transfer a boot image from a server to peripheral equpment like diskless workstations routers x terminals and ip telephones Trunk One of several phone lines that originate and terminate in the same location Trunk Group Telephone lines that originate and terminate in the same location UDP See User Datagram Protocol UTP Unshielded Twisted Pair U S Mainland The District of Columbia and the 48 conterminous states U S Territories Puerto Rico the U S Virgin Islands Guam the Commonwealth of the Northern Mariana Islands and American Samoa User Datagram Protocol An unreliable protocol used for t
110. c Switched Telephone Network started in 1876 when Alexander Grahm Bell made the first telephone call The first call was from Mr Bell to his assistanct Mr Watson where he said Mr Watson come here I need you The second call was froma telemarketer This first call was made over a ring down circuit Two wires connected the two telephones The first phone was always connected to the second phone and there was no ringing This was a half duplex circuit where only one person could talk at once As shown in the following diagram every phone wa connected to every other phone Figure 16 1 Fully Connected or Full Mesh It would be too expensive and too difficult to build a large telephone network with this topology The solution to this topology problem is a switch A switch only requires a wire pair from each phone to central office At the central office a switch is used to connect one call to another call The origina switch was a person the operator The PSTN guickly evolved to a full duplex system where both parties could talk at the same time The person was soon replaced by a mechanical switch Years later the mechanical switch was replaced wit the electronic switch Now Asterisk running on a PC with Digium interface boards can switch calls Figure 16 2 Fully Connected Sounds are analog They are continuous wave forms that vary in frequency and amplitude The PSTN originally sent analog signals from
111. c collation sequence The result of each comparison is 1 i the specified relation is true or 0 if the relation is false exprl expr2 Return the results of addition or subtraction of integer valued arguments expel vf Sxpr2 Return the results of multiplication integer division or remainder of integer valued arguments expri expr2 The operator matches expr1 against expr2 which must be a regular expression The regular expression is anchored to the beginning of the string with an implicit If the match succeeds and the pattern contains at least one regular expression sub expression the string corresponding to 7 is returned otherwise the matching operator returns the number of characters matched If the match fails and the pattern contains a regular expression sub expression the null string is returned otherwise 0 The order of execution can be changed with a goto statement The goto can change execution to any context extension or priority The return from thegoto is always zero even if the goto fails The syntax of the goto statement is goto context extension priority You can specify a priority an extension and a priority or a context extension and priority Goto context extension priority Goto extension priority Goto priority Here is an example exten gt 1 1 Goto sales The special extension BYEXTENSION allows a transfer to a different context without having to specify the e
112. call with fewer than the usual number of required numbers Access A means by which Company service is provided to a Customer Access may be Dedicated in which case it is available to theCustomer on a full time unshared basis or it may be Switched in which case it is available to theCustomer and others on a usage shared basis Access Service Request An order placed with a Local Access provider for Local Access Add On Conference A call where additional users are added to a conversation without operator intervention ANI See automatic number identification Alternate Access Access to the PSTN provided by a vendor who is not a LEC but is authorized or permitted to provide services Alternate Access Carrier Provides access in competition with local exchange carriers or RBOCs Area Code See Numbering Plan Area Automatic Number Identification Provides the telephone number of the calling party Answer Supervision When a called station answers an off hook signal is sent to the call originator Ballot A release form a customer competes to switch between long distance carriers or resellers BAN See Billing Account Number Bearer Channel A communications channel used for transmitting an aggregated signal generated by multi channel transmitting equipment Also the designation of a 64 kbs channel provided to anISDN user BGP Border Gateway Protocol Border Gateway Protocol BGP is an inter au
113. caller number Two section names in extensions conf are reserved general and globals A section with any name other thangeneral or globals defines an extension context An extension context is a group of extensions This should always be the first section of extensions conf This section contains two variables used by Asterisk to control protection of the extensions file static yes writeprotect n If static is set to no or doesn t appear in the extensions conf file the configuration file can be overwritten by the running Asterisk system If static is set to yes and writeprotect is set to no you can use the comman save dialpla from the Asterisk command line interface to save the dial plan in use This should always be the second section of extensions conf The globals section of the extensions configuration file contains variables that are available from anywhere within the extensions file For example globals CONSOLE Console dsp Console Interfac CONSOLE Console dsp sole interface for dem CONSOLE Zap CONSOLE Phone phone IAXINFO guest IAXtel username passwor IAXINFO myuser mypas TRUNK Zap g2 Trunk interface TRUNKMSD 1 MSD digits to strip usually 1 or 0 TRUNK IAX2 user pass provide Globals are referenced in the dial plan with a dollar sign and then within curly braces S VARIABLE References to globals can be nested for example text VARIABLE Operating system environm
114. ccessnetworks com and is based on the OpenH 323 project http www openH323 orq While H 323 support is present in Asterisk H 323 is a dying standard Whenever possible you should use a more modern interface likeSIP or IAX A codec compressor decompressor is used to compress analog voice into a digital data stream or to decompress the data back into an analog signal Asterisk can operate with a wide variety of codecs an file formats Because of its open architecture it is easy to incorporate additional codecs or file formats There are two common 64 kbps PCM compression standards micro law and a law Both use logarithmic compression to effectively achieve 12 to 13 bits of linear compression in 8 bits Logarithmic compression reduces higher volumes or frequencies exponentially Micro law is slightly better in compressing low level signals and has a slightly better signal to noise ratio Micro law is commonl used in North America a law is commonly used in Europe Asterisk provides seamless transparent translation between any of the following codecs TABLE 02 2 Supported Codecs A Codec Rate lezate iiec 128 kbps Ga viiu micro law 64 kbps G 7lla A law 64 kbps IMA ADPCM Seb s GSM 6 10 12 kbps MP3 variable decode only TRC LO 2 4 kbps In addition other codecs such as G 723 1 and G 729 can be passed through transparently Note that you should use the alaw ulaw or linear codecs to use in band DTMF Note that most
115. ch Compatibility AT amp T 4ESS DMS 100 Lucent 5E National ISDN2 Network or CPE RBS Voice Modes A Law Mu Law and Linnear Modes E amp M E amp M Wink Feature Group D Groundstart FXO and FXS Loopstart FXO and FXS with Optional Disconnect Supervision Data Modes SyncPPP both fixed and dialup Frame Relay Cisco HDLC Services and Features Caller ID Transmission Reception Pseudo TDM conferencing with Zaptel channels Digital gain control transmit and recieve Dynamic span interaction TDM over Ethernet cho canceller RAS capability N RAS capability Local and remote loop backs Pseudo TDM bus architecture provides low latency Supports same span voice and data Tone internaltionalization tone zones Figure 08 3 T100P Features By utilizing Digium TDMoE TDM over Ethernet technology an exclusive Digium process one can easily connect multiple PCs equipped with the T100P and achieve voice quality on par with singl PBX implementations Scalability for this product is derived from adding multiple T100Ps to each individual PC Add addition cards as you need them for your expanding applications The T100P supports industry standard telephony and data protocols including both RBS and Primary RatelSDN PRI protocol families for voice and PPP Cisco HDLC and Frame Relay data modes The board drives both line side and trunk side interfaces including call features The T100P is no FCC approved for Part 68 The E100P is the European
116. codecs are too lossy to support fax transmissions Note that a codec determines how information is encoded This is different from a file format A stream of data compressed with a codec could be saved in different file formats Asterisk uses files to store audio data including voicemail and music on hold Asterisk supports a wide variety of file formats for audio files Supported formats includ TABLE 02 3 format description raw 16 bit linear raw data pcem 8 bit micro law raw data VOX 4 bit IMA ADPCM raw data wav 16 bit linear WAV file at 8000 Hz WAV GSM compressed WAV file at 8000 Hz gsm raw GSM compressed data G23 simple g723 format with time stamp Quality of Service QoS is the ability of a network to provide improved service to selected network traffic QoS support is available in a variety of networking equipment for example routers QoS tools can let you manage the end to end efficiency of your voice traffic A detailed discussion ofQoS is beyond the scope of this book You can pursue this topic elswhere including RFC3290 QoS provides priority service to selected traffic to optimize the use of available bandwidth control jitter and latency and improve loss characteristics QoS tools provide control over congestion management queue management traffic shaping and policing and link efficiency This makes it easier for mission critical applications to co exist on a network OptimizingQoS for one data flow should not
117. count Select Next to continue For the next dialog enter a computer name and computer domain If you want this server to participate in an Microsoft Networking workgoup enter the name of the group SelectNext to move to the next dialog Turn off the Guarddog firewall service for now You can start it later after you have Asterisk successfully running Select Next Turn on the Apache web server if you want to access Asterisk through via the Web Start the SSH server the dchp3 server and the tftp server SSH will allow you to access the machine from remot locations or from other machines on your local area network VariousSIP telephones require dhcp and tftp SelectNext and then Finish Type ctrl alt del to bring up the shutdown screen and stop your computer Remove the CD from the drive Start the computer again As one or your installation options turn on the tftp server To access the machine remotely turn on SSH If you want to use your Asterisk server for DHCP turn this on during installation as well If yo are placing the server behind a firewall and you would like to access it from outside the firewall forward the ports for tftp and ssh As you will be running Asterisk as a server you should configure the network interface for your Server with a permanent IP address TheMepis System Center will allow you to easily change your network settings Open the System Center SelectNetwork Interfaces You will need to have an IP address f
118. d 1980s You would be able to make a very large number of telephone calls over a SONET connection SONET specifies interoperability standards between products from different vendors SONET can carry different data protocols including IP SONET includes management and maintenance support SONET is cost competitive with alternatives like ATM and Gigabit Ethernet SONET specifies OC optical carrier signal levels The OC signal levels place STS synchronous transport signal frames onto a multimode fiber optic line at a variety of speeds The base signal rate is A 51 84 Mbps OC 1 each signal level thereafter operates at a speed divisible by that number thus OC 3 runs at 155 52 Mbps This system is built with multiplies of the OC 1 rate of 51 840 Mbps This is called STS 1 Synchronous Transport Signal Level 1 T TABLE 15 2 SONET Speeds Name Data Rate STS 51 849 Mbs Sioa IDS gt o S20 Moss SIs 466 560 Mbs Sis i12 622 080 Mbs STS 48 24887320 This system uses a fundamental rate of 155 520 mbps three times the speed of SONET The fundamental signal is STM 1 Synchronous Transport Module Level 1 The transmission media fiber butis the BroadbandISDN specifies a User Network Interface STM 1 155 520 mbps operating over coaxial cables Some typical rates within this hierarchy TABLE 15 3 SDH Speeds Name Data Rate STM 1 155 520 Mbs SEM 3 466 560 Mbs STM 4 622 080 Mbs STM 16 2488 320 Mbs The Publi
119. data using IP the Internet Protocol Telephone calls are sent from one IP phone to another IP phone as data An Asterisk system often services many IP telephones as many as a thousand or more Standard analog telephones or other devices like fax machines can be connected with an inexpensive adaptor With such a system anyone in the office can call anyone else in the office Calling outside the office fo example anyone with a regular telephone is described below IP phones are not connected to wires you rent from the phone company to the telephone company itself or to telephone wires you have in your office They are connected to your data network You can call from a VoIP phone on your network to any other phone connected to your VoIP system VoIP calls go over your local data network not thePSTN Public Switched Telephone Network and not your local telephone wires You don t need a connection to the PSTN to make calls to other phones connected your local VoIP system If you have two different office buildings or offices on different floors and they are connecte to your local area network you call phones or fax machines in the other area Those calls still trave over your data network Asterisk VOIP running or a PC IF Paone Your Network Figure 01 1 IP Phones in the Office As shown in the illustration your Asterisk telephone system can easily be connected to the Internet Any telephone can be easily c
120. des SyncPPP both Fixed and Dialup Frame Relay Cisco HDLC Services and Features Caller ID Transmission Reception Psauedo TDM Conferencing with Zaptel Channels Digital Gain Control Transmit amp Recieve Dynamic Span Interaction TDM over Ethernet Echo Canceller ISDN RAS Capability Local and Remote Loop Backs Pseudo TDM Bus Architecture keeps Latency Low Support Same Span Voice and Data Tone Internaltionalization Tona Zone SPV Ewe SS Wee Vee LN eS CS SS OS Tone Internaltionalization Tona Zone Figure 08 5 E100P Features By utilizing our TDMoE TDM over Ethernet technology an exclusive Digium process one can easily connect multiple PCs equipped with the E100P and achieve voice quality on par with single PBX implementations Scalability for this product is derived from adding multiple E100Ps to each individual PC Add addition cards as you need them for your expanding applications The E100P supports industry standard telephony and data protocols including both RBS and Primary RatelSDN PRI protocol families for voice and PPP Cisco HDLC and Frame Relay data modes The board drives both line side and trunk side interfaces including call features The T100P is the US equivalent of the E100P providing a single T1 24 channel interface A quad span togglable E1 T1 card enables per card or per port selection of either T1 or E1 signaling formats The TE410P is a 3 3 volt PCI card the TE405P is a 5 volt card This card pr
121. detect and install any new hardware Use the Kudzu dialog to configure the computer for the new PnP boards Be sure to have any hardware for example T1 cards installed in your server before you compile Asterisk Any boards will need to be configured later This is covered in later chapters The music on hold application and conferencing rely on access to a timing source Three sources are available the Zaptel drivers used with Digium s Wildcard boards ztdummy or zaprtc which uses th system clock If you install any Digium Zaptel card loading the driver for the card with the modprobe command automatically sets up the Zaptel interface Timing is then automatically available with no further configuration The ztdummy zaptel driver provides timing information when no Wildcard board is installed Ztdummy is a kernel module that you load with the Linux command modprobe The ztdummy driver can provide timing information It is available in the zaptel directory from the Asterisk CVS repository The ztdummy module uses USB UHCI timers found in linux USB drivers You must load UHCIUSB as a module before loading ztdummy Ztdummy won t work if you try and compile uusb uhci it into the kernel The ztdummy driver is included with the MEPIS Asterisk source It is not compiled by default To include ztdummy in your Asterisk installation edit the makefile in usr src zaptel Remove the in front ofztummy o from the following line MODULES zaptel o
122. devices listed in ARG3 S ARG1 voicemail contex S ARG2 Extension for voicemail and other use S ARG3 Time to rin S ARG4 Device s to rin exten gt s 1 Dial S ARG4 ARG3 Ring the interface 2 Voicemail2 uS ARG2 S ARG1 If unavailable send to vm as unavail 3 Goto S ARG2 1 If they press return to start 102 Voicemail2 bS ARG2 S ARG1 If busy send to vm w busy announce 103 Goto ARG2 1 If they press return to start exten exten exten exten VV VV Ann Nn Here is an example of this macro in use The first argument is the name of the macro to run the remaining are arguments to the macro exten gt 19355 1 Macro stdexten default 355 12 355 This example uses a macro to create extensions The u and the b choose between unavailable and busy voicemail messages globals PHONE1 Zap PHONE2SIP 6002 macro oneline exte gt s 1 Dial ARG1 20 t exten gt s 2 Voicemail u MACRO_EXTEN exten gt s 3 Hangup exten gt s 102 Voicemail bS MACRO_EXTEN gt exten s 103 Hangup local exte gt 6601 1 Macro oneline PHONE1 exten gt 6602 1 Macro oneline PHONE2 The following applications are available for use in extensions conf To see a list of applications from the Asterisk command prompt typ show applications As of the time of writing of this book the available applications are in alphabetical order AbsoluteTimeout Set absolute maximum ti
123. dial plan of a remote server can be accessed The local switch ca reference the remote dial plan This allows a complex dial plan for multiple servers to be centralized o a single server As described in the earlier chapter on Asterisk architecture an Asterisk interface is specified as Here is an example in extensions conf that uses the Dial application to associate extension 4035 with SIP line F8 If this entry is included in the dial plan calls directed to extension 4035 will be switched toSIP line F8 exten gt 4035 1 Dial SIP F8 20 In this example Asterisk extension 1010 dials SIP the client SIP OEJ SIP OEJ is on the local asterisk server exten gt 1010 1 Dial SIP oej 20 tr Next extension 1015 dials extension 10000 on the remote SIP server fwad pulver com Pulver could be a SIP server or a SIP Proxy exten gt 1015 1 Dial SIP 10000 fwd pulver com 5060 Groups of commands can be reused by combining them into a macro A macro accepts arguments A macro is named with the prefixmacro in the context name The macro shown here rings an extension for some number of seconds before forwarding the call to a different extension Note the use of th variables instead of an extension number Arguments are specified with the syntax ARG macro stdexten 7 standard extension macro for single stage ringing Calls an extension for S ARG2 seconds If that fails goes to voicemail for extension ARG1 Rings th
124. digit dialing for all numbers Dial around is now available for a user to specify a long distance carrier Dialing some number like 10 XX XXX can switch a call to the desired long distance carrier The ITU T Recommendation E 164 International Numbering Plan uses a Country Code CC national Destination Code NDC andSubscriber Number SN to switch a call to a user The CC can be one two or three digits The NDC and SN can vary in length from country to country Neither can have more than 15 digits The PSTN has held up well over the years for switching telephone calls from one user to another On many networks built for voice there is more data being sent than voice This data is being sent over network that was optimized for voice ThePSTN was never designed for data traffic and suffers for it In the near future most voice will be carried as data over networks that were designed to carry data In the future more and more voice traffic will be sent over IP or ATM telephone company networks This chapter briefly addresses VoIP standards especially H 323 and SIP SIP is obsoleting H 323 so the emphasis is onSIP For a more comprehensive discussion of SIP consult the SIP standard or the bookInternet Communications Using SIP by Henry Sinnreich You do not need an in depth understanding of VoIP standards to build Asterisk systems or to use Asterisk Asterisk hides most of the complexity of VoIP protocols for you A more deta
125. e Rate Center A specified geographical location used for determining mileage measurements Rate Element A low level component of a recurring fixed charge for IEC or LEC services Rates and Tariffs Published standards that define what services are available how much they cost and how they are provisioned RBOC See Regional Bell Operating Company Real Time Transport Protocol A protocol for transmitting and re assembling IP data packets Redundancy An offering of alternate service through the use of one or more different routings circuits and or additional equipment A Regional Bell Operating Company One of the seven Baby Bell operating companies One of the seven LECs established in the U S Department of Justice 1984 Consent Decree with A amp T The RBOC carriers are Ameritech Verizon NYNEX or Verizon North Verizon Bell Atlantic or Verizon South Bell South Pacific Bell PacBell Southwestern Bell and US West Qwest Regulators FCC PUC Federal Courts ETC Requested Service Date The date requested by the Customer for the commencement of service and agreed to by the Company Reseller An IEC that leases bulk capacity and then resells some of it at a higher rate Residential Customer An individual non business telephone customer Restoration The re establishment of service RIP Router Information Protocol Robbed Bit Signaling The same as Channel Associated S
126. e IAX server the call will be sent to exten gt _1NXXNXXXXXX 1 Dial IAX2 cpc mysecret sip iaxserver com S EXTEN Free calls can be made over the Internet between Asterisk machines with iaxtel laxtel information is available atwww iaxtel com A registration at iaxtel com provides a 700 area code telephone number usable within the axte network With this registration calls can be made to or from other iaxtel users There are a few publicly available bridges fromi axtel to the PSTN The next example shows the configuration for outgoing calls with Voicepulse Voicepulse can be found athitp www voicepulse com Voicepluse is an IAX service provider in the eastern US You can purchase an IAX connection from Voicepulse for incoming and Outgoing calls Voicepulse service can include a DID with a telephone number in many areas Voicepulse provides long distance services at attractive rates exten gt _1NXXNXXXXXX 1 DIAL IAX2 loginID voicepulse EXTEN If the client moves and appears on different ip addresses the IAX client must register with the IAX server The IAX registration informs the IAX server of the ip address of the IAX client The IAX client registration statement is in the general section of the client iax conf file Here are some registration examples register withiaxserver com register gt cpe mysecret sip iaxserver com Register witvoicepulse com register gt wpuserivpsecret vol cepul se gom
127. e an existingIlnternet connection Will Asterisk users share an existing data network How heavily loaded is the network What will happen if the network is attacked for example a denial of service attack What will happen if a backup is started across the network What will happen if a user drags and drop 1 000 files across the network What is the electricity supply like Is there backup power How long will backup power last How long will the Asterisk server and all the related equipment run during a power outage Is there backup equipment Is there a backup Asterisk server Is there automatic failover Is spare equipment easily available Are spare communications boards readily available Is there automatic cal forwarding to alternate telephone numbers in case of an Asterisk or communications failure Aterisk is rapidly evolving New versions are available on an almost daily basis New features and facilities are being added How and when do you move to a newer version Maintain a copy of any installed systems Have backups available in case the move to a newer version fails Moving to a newer version will require testing outside of the production environment Test any new system completely in a test environment before deploying it Deploying a new system may require changing documentation or operating procedures and more user training You need a server running Linux If you install Linux yourself it s much easier to install all
128. e diagram shows a typical SS7 call flow In this example picking up the phone sends an off hook signal to the SS7 switch at the local office The switch sends dial tone to the phone The caller presses buttons on the phone This sends a message to the switch containing a telephon number TheSwitch responds to the dialed number with a setup or Initial Address Message IAM The local switch sends a new IAM across the SS7 network to the second switch The second switc sends an Address Complete Message ACM back over the SS7 network The called phone rings Th calling party hears a ringing sound The called user picks up the phone This action sends an off hoo message back to the switch The switch send an alerting message back over the SS7 network Hangin up a phone disconnects the call off hook SS dial tone lt digits setup alerting ring tone off hook connect conn ack disconnect disconnect release gt release release ack Figure 16 4 SS7 Call Flow A local call can usually be dialed with seven digits Dialing a long distance call requires dialing 1 and then an area code and then the three digit exchange number and then the last four digits of the telephone number This scheme is the dialing plan for thePSTN The number of telephone numbers that are needed has dramatically grown over the years Because of this the current dialing plan may have to be changed to demand eleven
129. e images shown are for the latest mino revision shown in each of he major releases The next table shows many of the available files The file you must download for eachSIP version are listed in the following sections Copy the downloaded files to the TFTP server directory In the Mepis distribution this is boot Make sure all the files in theTFTP directory are readable by everyone Note that the names are case sensitive For example if the file OS799XX TXT is renamed OS79XX txt the 7960 won t find it TABLE 13 1 SIP Download Files File Name Required Description OST OROL o SSE REQUIRED The contents of this file indicate which software the phone should load You must edit this file as described below SIPDefault cnf OPTIONAL Contains SIP parameters that are to be applied to all phones SIPmacaddress cnf REQUIRED Contains SIP parameters for an individual phone Must be copied and renamed for each phone as described below RINGLIST DAT OPTIONAL Lists custom ring options The audio files named in RINGLIST DAT must be available in the TFTP data directory ringerl pcm REQUIRED Ringer tone ringer2 pcm REQUIRED Ringer tone POS3xxyy bin REQUIRED SIP IP phone image The phone must have a SIP image available The earliest release version 2 uses this naming convention xx major version yy minor version POS xx yy Zz OIN REQUIRED SIP IP phone image The phone must have a SIP image available From version 3 forward this na
130. e is only matched when it has more nonwildcard matches than an incomplete r Comments tart with Here is an example Without a dial plan the user has to press the Dial soft button to start a call This entry indialplan xml will start a call without pressing the dial button Here is a sample North American dial plan Two ring tones Chirpl and Chirp2 are supplied with the 7960 configuration files By changing the file RINGLIST DAT you can add new ring tones Ring tones must be a PCM file stored in the TFTP directory The PCM files must not contain any header information and must be in the following format 8000 Hz sampling rat 8 bits per sampl u law compressio Use any ASCII editor to change the file RINGLIST DAT Add the name of each new ring tone to this file press Tab and then enter the filename of the ring type Here is an example The first entry is th name that displays on the phone the second entry is the name of the pcm encoded file The sound file must be located in the tftp directory oldstyle oldstyle pc what whatwhatwhat pc synthlow synthlow pc Note the label and the file name must be separated with a TAB character or the download will fail Here is how to configure Asterisk so that the messages button on the 7960 will dial voice mail Thanks are due to John Baker Adam Low and Brian Pollack for figuring this out First in the configuration file for the 7960 SIPDefault cnf add an entry that specifie
131. e playbac skipms 300 How many seconds of silence before we end the recordin maxsilence 1 Silence threshold what we consider silence the lower the more sensitive silencethreshold 12 Max number of failed login attempt maxlogins zonemessages eastern America New_York vm received Q digits at IMp central America Chicago vm received Q digits at IMp central24 America Chicago vm received q digits at H digits hundred M hours from sip gt 4009 Paul 4035 gt 4035 Daryl Before using the voicemail system create an empty voicemail box for each user The shell script usr src asterisk addmailbo creates a directory each user It installs default greetings Before starting Asterisk run the addmailbox script twice to create mail folders for extensions 4035 and 4009 Start asterisk from the command prompt Extension 4009 should be able to dial extension 4035 and extension 4035 should ring Watch the console for the messages during dialing and after you hang up If the busy message immediately appears a phone probably hasn t registered with the Asterisk server Make sure the phone is sending register statements Asterisk relies upon the register statements t ensure that a remote client is available for inbound calls Next try leaving voicemail Dial one extension from the other extension Dial into voicemail and set your preferences Dial into voicemail and check your messages Getting your first Asterisk sys
132. e recommended configuration is to select a low bandwidth and disallow the LPC10 codec The LPC10 codec doesn t sound very good jitterbuffer yes no dropcount maxjitterbuffer mMaxexcessbuffer These parameters control the operation of the jitter buffer The jitter buffer should always be enabled unless you all your connections are over a LAN The drop count is the maximum number of voic packets to allow to drop out of 100 Useful values are 3 10 The maxjitterbuffer is the maximu amount of jitter buffer to permit The maxexcessbuffer is the maximum amount of excess jitter buffe that is permitted before the jitter buffer is automatically shrunk to eliminate latency accountcode amaflags default omit billing documentation These affect call detail record generation Accountcode sets the account code for records received with IAX The account code can be overridden on a per user basis for incoming calls Amaflags controls how a record is labeled andomit prevents a record from being written Billing and documentation label the records as billing or documentation records Default selects the system default tos lowdelay throughput reliability mincost none IAX can optionally set the TOS Type of Service bits to improve routing performance The recommended value is lowdelay Many routers including any Linux routers with 2 4 kernels that have not been altered with ip tables will give priority to these packets This improves voice
133. e services Loop Start A signal sent by a telephone or PBX that indicates the loop path has been completed Message Toll Service Switched long distance phone services between LECs and LATAsS Typically charged for by the minue Mb mB With a capital B Mega Bytes With a lower case m Mega bits mbps Mega bits per second mbps Mega bytes per second Modem Modulator De Modulator A device used to send data over POTS lines by converting the data into sound Multiline Terminating Device Switching equipment key telephone type systems or other Similar customer premises terminating equipment which is capable of terminating more than one access line MTS See Message Toll Service NASC Number Search An application used to find available numbers in the 800 area code and reserve them for up to sixty days NAT Network Address Translation NEXT Near End Cross Talk NPA See Numbering Plan Area Numbering Plan Area The North American three digit codes used to identify a specific calling area Numbering Plan Area Split Division of an NPA by the addition of a new three digit code NUS See NASC Number Search OC see Optical Carrier OCC See Other Common Carrier OSPF Open Shortest Path First One Plus Dialing Access to long distance services by prefixing the dialed number with the digit 1 Operator Theperson who assists people in placing telephone calls Operator Serv
134. e that some Digium cards require a modern motherboard that supplies A 5 0 volts Some cards require a connection to the computer power supply There are two configuration files you must change when you use Zaptel cards The two files are zaptel conf and Zapata conf The file zapata conf often found in the directory etc contains configuration information for Zaptel boards This file contains information used to configure the hardware for the corresponding hardwar drivers The file zapata conf often found in the directory etc asterisk contains configuration information that describes how Asterisk interacts with the Zaptel cards Before starting Asterisk you must have loaded the drivers for any Digium boards you have installed Asterisk may not start or operate correctly if the drivers for the boards are not loaded You can ru modprobe manually from the command line for each driver modprobe wct1xx or automatically load the drivers with the Linux boot files For example Debin lists drivers to load in the file etc modules The modprobe command loads the appropriate driver while resolving any known dependencies on other modules For example the following command loads the drivers for the four portFXS board modprobe wcfxs At the time of writing the following boards were available Column two shows the argument for the modprobe command TABLE 08 1 Digium Interface Cards Card modprobe description TE410P wet 4xxp Quad sp
135. east this version CiscoSIP version 6 0 is known to work well with Asterisk Configuring a 7960 is difficult and error prone The steps documented here have been tested and verified If you differ from these steps you will likely encounter problems that will be time consuming to solve You may find that you need help in addition to what is in this chapter and the Cisco provided documentation Additional technical help for the 7960 is available from the Cisco Web site and Cisco support You must have a maintenance contract for a Cisco product to get a login to access the Cisco Web site Contact Cisco or your authorized reseller for information about a maintenance contract and access t the Cisco Web site If you have a new 7960 IP phone you can get a maintenance contract for that phone If you have an older phone that is out of warranty you may be able to get the phone re certified and then get a maintenance contract Cisco resellers can get your phone re certified and sell you a maintenance contract At the time of writing a maintenance agreement for a new phone was a few dollars and an agreemen to put a phone back in warranty was less than 100 Once you have a login you can access any information about any Cisco product at the Cisco Technical Assistance Center TAC Access the TAC Web site at http www cisco com tac A documentation CD Rom ships with each 7960 phone You can order a current documentation CDROM from Cisco Tw
136. ecides to perform all English language support from San Jose Users in London can call the London telephone number for the company If they wish to contact support thei call i routed to the San Jose office over the company s VPN This is a toll bypass call Asterisk is primarily developed with GNU and Linux for x86 It is known to compile and run on GNU and Linux for PPC Other platforms and standards based UNIX like operating systems shoul be easy to port Much work has been done to port Asterisk to BSD 1 ACODEC is a compressor decompressor A CODEC is used to digitize voice into data or convert digitized voice back to an analog signal Asterisk was originally written by Mark Spencer of Digium Inc Code has been contributed from Open Source programmers from around the world Testing and bug patches from the communit have proven invaluable in developing Asterisk Asterisk is now an extremely successful team effort b the open source community Let s start with a simple description of the way an Asterisk system works and what an Asterisk system can do for you First is a description of an Asterisk system in your office Next larger systems that connect to thelnternet are described Last there is a description of the connection between your Asterisk system and the phone company VoIP Voice Over IP systems like Asterisk can use a computer to send and receive telephone calls over a data network Telephone calls are sent over the network as
137. ectory as needed 3 Configure the DHCP server 3 Connect the phone to the network 4 Apply power to the phone Phone power can be supplied over the ethernet cable or directly to the phone by a separate wall transformer 5 Unlock the phone 6 Configure your phone for your network or configure your DHCP server with the setting required by the phone 8 Re boot the phone 7 Check the phone settings and status messages Each phone must be configured for your network If you use a DHCP server the following DHCP options must be set Explaining the meaning or use of each of these options is beyond the scope of this book Note though that your DHCP server must be capable of setting values for each of these option including theTFTP server address IP Address DHCP Option 50 Subnet Mask DHCP Option 1 Routers Default IP Gateway DHCP Option 3 DNS Server Address DHCP Option 6 TFTP Server DHCP Option 66 Domain Name DHCP Option 15 Note that with DHCP3 the version of DHCP shipped with Mepis the TFTP server address is set with the optionnext server Here is an example option tftp server name 192 168 1 12 You can get the TFTP server ip address from a DNS host here is an example option domain name servers 192 168 100 20 192 168 8 100 option domain name dname com option tftp server name sip dname com Here is an example DHCP configuration that will correctly configure the 7960
138. ed by one Asterisk server can be switched to a second Asterisk server and then on to th PSTN As shown in figure one Asterisk contains engines that perform critical functions When Asterisk starts the Dynamic Module Loader loads and initializes drivers The drivers provide channel drivers file formats call detail recording backends codecs and applications among others The Asterisk PBX Switching Core accepts telephone calls from the interfaces The Switching Core handles calls according to the instructions found in a dial plan The PBX Switching Core uses the Application Launcher to ring phones to connect to voicemail or to dial out on outbound trunks The PBX Switching Core includes a Scheduler and I O manager that is available to drivers and applictions The Codec Translator seamlessly connects channels that compressed with different codecs Most of Asterisk s flexibility comes from the applications codecs channel drivers file formats and othe facilities interaction with the various programming interfaces cusiom Appl cation Paging Conferencing Caling Cards Voice Mai Directory Dialin Asterisk Application API Translator Scheduler and IO manager Aslerisk Application File Launcher Format API GSW G 722 1 CODEC mu law a law Translatur ADPCM WPS API Dynamic Mendue loaner PBX Switching Core Asterisk Channe API Adira VorR ISDN SIF Carrier Modem 323 Figure 02 1 Major Asterisk Subsyste
139. ed extensions The Dial command can determine which command should execute next Adding 100 to the priority of the secondVoicemail command indicates a busy referral instead of an unanswered referral Different voicemail recordings can be played for a busy and unanswered calls In this example the priority of and 102 are equivalent priorities but theDial application recognizes the difference between the two commands If there is no answer the Dial application redirects the call to voicemail The u in the u600 argument indicates a referral to unavailable voicemail The b in the b600 argument indicates a referral to the busy voicemail message exten gt s 1 Wait 1 Wait one second This example demonstrates a simple call queue exten gt 600 1 Dial Zap 9 15 exten gt 600 2 Voicemail u600 exten gt 600 102 WaitMusicOnHold 5 exten gt 600 103 Goto 1 This dial plan tries to switch the incoming call to the Zap 9 interface for up to 15 seconds If the extension remains unanswered the calling party hears music on hold for five seconds They are the returned to the first extension This puts the calling party on hold until the called party becomes available The caller hears music on hold as they are waiting The following dial plan creates an operator extension exten gt 0 1 Dial Zap 9 15 0 2 Dial Zap 10 amp Zap 11 amp Zap 12 15 exten gt exten gt 0 3 Playback companymailbox gt gt exten 0 4 Voicema
140. efined for local calls Any call started by dialing 9 is defined as a local call Emergency 911 calling is supported The dia command routes these calls out over the Zap group two interface directdial ignorepat gt 9 exten gt 9 1 Dial Zap g2 exten gt 9 2 Congestion local ignorepa gt 9 exten gt _9NXXXXXXX 1 Dial Zap g2 S EXTEN 1 exten gt _9NXXXXXXX 2 Congestion include gt default longdistance ignorepa gt 9 exten gt _91NXXNXXXXXX 1 Dial Zap g2 EXTEN 1 exten gt _91NXXNXXXXXX 2 Congestion include gt local international ignorepa gt 9 exten gt _9011 1 Dial Zap g2 S EXTEN 1 exten gt _9011 2 Congestion include gt longdistance The local context uses pattern matching The ignorepat command causes the number nine to be ignored when dialed The underscore character in the dial string indicates a pattern is to be matched This pattern matches the user dialing a nine followed by a one The N matches any number from on to nine An X matches any number from zero to nine This can now be easily seen to match a loca dialed number The dialed number will be tried by dialing out on any Zap g2 group two channel the call cannot be dialed out on the Zap interface the caller is directed to the congestion tone Note the local context includes the default context the long distance context includes the local context and the international context includes the long distance context T
141. ell Number Pager Number TABLE checklist 3 T1 Provider company name Provider comapny contact Contact Phone number Contact email Contact cell phone number Calizeualic IED Circuit completed and tested Framing CSU DSU Data Port Number Telephone numbers TABLE checklist 4 SIP Provider Provider company name Provider comapny contact Contact Phone number Contact email Contact cell phone number Calieeiwlalic ILD Circuit completed and tested Telephone numbers TABLE checklist 5 IP IP address for Asterisk server Subnet Mask Router address default gateway Primary DNS Server Secondary DNS Server TABLE checklist 6 Frane Rekat Provider company name Provider comapny contact Contact Phone number Contact email Contact cell phone number Port Speed Circuit completed and tested PVG CIR Circuit Number LMI Type Caamya nmi le omancucatcmonmentcms amem EE TABLE checklist 7 Asterisk Server Provider company name Provider comapny contact Contact Phone number Contact address ComeEace alin Contact Stable Comt ac tiez Contact phone number Contact cell phone number Computer Model Processor Speed Memory Controller Type SCSII IDE RAID YES NO Disk 1 Size Disk Disk Disk 2 Size 3 Size 4 Size Removeable media 1 CD ROM DVD ROM CD RW DVD RW MaKe i 10 or 100 or Calgaloaig NOS 2 10 or 100 or ealcaloilic ain ain Removeable media 2 CD ROM DV
142. emote host If the host is dynamic then the SIP client must register to accept incoming calls from the remote host The file sip conf contains the definitions of SIP channels All SIP channels must be defined here This file is divided into contexts The general context of sip conf can reference the following variables port Port to bind to bindaddr 0 0 0 0 IP Address to bind to listen on externip 200 201 202 203 The SIP Address put in SIP messages when sent from behindNAT context Default context for incoming calls in extensions conf srvlookup yes no EnablDNS SRV lookups on outbound calls pedantic yes no Enable slow pedantic checking of Call ID s for Pingtel tos lowdelay SetQoS parameters for outgoing media streams numeric values are accepted like tos 184 maxexpirey 3600 Max length of incoming registration we allow defaultexpirey 120 Default length of incoming outoing registration notifymimetype text plain Allow overriding of mime type in NOTIFY used in voicemail online messages videosupport yes no Turn on supSIP video disallow all Disallow all codecs al Allow codecs in order of preference register gt Register with aSIP provider There is currently no alternative to showing passwords in clear text in sip conf SIP peer definitions are configured with the following variables in sip conf accountcode Used by Asterisk billing Users may be associated with a accountcode amaflags
143. en gt 1 2 SetVar koko lala exten gt 1 3 SetVar koko blabla The first example above stores in koko the value lala The second example stores in lala the value blabla The variable koko is replaced with the value of the variable koko Everything inside brackets and prefixed by a is considered as an expression and is evaluated this Evaluation is similar to variable substitution The expression including the square brackets is replaced by the result of the expression evaluation The arguments and operands of the expressionmust be separated with spaces Don t leave any spaces between opening and closing square brackets and the first and last arguments Parentheses are used for grouping For example after the sequence exten gt 1 1 SetVar lala S 1 2 exten gt 1 2 SetVar koko S 2 S lala the value of variable koko is six Operators are listed below in order of increasing precedence Operators with equal precedence are grouped withi symbols exprl expr2 Return the evaluation of expr1 if it is not an empty string or zero otherwise returns the evaluation of expr2 exprl amp expr2 Return the evaluation of expr1 if neither expression evaluates to an empty string or zero otherwise returns zero xprl gt gt lt lt expr2 Return the results of integer comparison if both arguments are integers otherwise returns the results of string comparison using the locale specifi
144. ensions Note that when the user selects an extension found invoicemail conf their call will forward to that extension found the same context in this casemain in extensions conf The context name must be the same in sip conf extensions conf and voicemail conffor voicemail and directory services to work properly A perl script usr src asterisk vmail cgi is included in the source distribution The command make install does not install the interface Runmake webvmail to create the interface This is a perl script and requires that perl and the perl suidperl packages are installed You will need a web server running o the Aterisk server You may have to modify the script to get it working for your installation Don t forget to make the script executable chmod x vmail cgi You can forward voicemail to an email account by adding an email address to voicemail conf Here is an example other 4008 gt 4008 Firstname Lastname yourname company com Linux must be configured to forward mail If you are using smail make sure that it is turned on at boot time For example with the Mepis Debian release you will need symbolic links that causesmail to start ln s etc init d smail etc rc3 d S85smai ln s etc init d smail etc rc5 d S85smai Edit etc smail config to reference the proper SMTP server where mail is to be sent in this example yourdomain com visible_nameyourdomain com Lastly you can start
145. ent variables are accessed with this syntax S ENV VARIABLE An extension is identified by an alpha numeric identifier Extension identifiers can contain numbers letters and the special character and For example the following entry is for extension 1000 exten gt 1000 1 Goto default s 1 Some extension names are reserved as shown in the following table TABLE 06 1 Reserved Extension Names Character Name Usage Start A call that does not have digits associated with it for example a loopstart ana loom hine begi NS ic icine Wisi Soaeciasialoya Timeout When a caller in a voice menu doesn t enter the correct number of digits the timeout extension is executed If there is no timeout extension the caller is disconnected Absolute Timeout When a call exceeds the value held in an Absolute Timeout variable invalid Executed when a caller enters an invalid extension Operator Executed when a caller presses 0 Hangup Executed at the end of a call when the caller hangs up or is hung up Applications executed in this extension cannot access the closed channel Useful for logging or executing commands An extension prefixed with the underscore character indicates a pattern match For example _NXXXXXX A pattern matching expression can include the following special pattern matching characters TABLE 06 2 Characters Used in Extension Pattern Matches Character Matches any digit from two to nine any digit from
146. entation of RTP real time protocol and SIP session initiation protocol voice over IP has the technological base to obsolete the circuit switched public switched telephone network Scenario A Small Office Asterisk can benefit a small office In this scenario a small office has four lines from the telephone company each with its own telephone number The office ha ten users There is a fax machine and a conference room The ten users eac have an IP telephone There is an IP telephone in the conference room Th small business can easily afford the inexpensive Asterisk server The Asterisk server manages calls for the four lines and all the phones and fax machines in the office Any incoming call on the fourth line is directed to th fax machine An incoming caller dialing the first line hears a voice menu There are choices for accessing a company directory calling the operator contacting sales or dialing an extension directly The caller wants to speak to someone in sales They consult the directory for the sales extension They press 100 on their telephone keypad the extension for sales Three phones are in the sales department All three phones ring There is distinctive ring that lets the sales staff know this is an incoming call from potential customer If no phone is answered by the fourth ring the caller is given the choice of leaving a message or contacting the operator If the user leaves a message it is stored i a separate vo
147. ertain IP addresses and not others The permit and deny rules are interpreted in sequence and all are evaluated ona given I address with the final result being the decision permit deny For example permit 0 0 0 0 0 0 0 0 d n 192 168 0 0 255 255 255 0 would deny anyone in 192 168 0 0 with a netmask of 24 bits class C The following example denies no one because of thepermit mask deny 192 168 0 0 255 255 255 0 permi 0 0 0 0 0 0 0 0 If no permit deny rules are listed it is assumed that someone may connect from anywhere callerid The callerid command overrides the Caller ID information received from a user auth md5 plaintext rsa Different authentication methods may be specified and are separated by commas If md5 or plaintext authentication is selected a secret must be provided If RSA authentication is specified then one o more key names must be specified withinkeys If no secret is specified and no authentication method is specified then no authentication is required secret The secret is the shared secret for md5 and plaintext authentication methods Never use plaintext except when debugging inkeys keyl key2 Inkeys specifies the keys used to authenticate a remote peer The key file is var lib asterisk keys pub Public keys are not DES3 encrypted and do not need initialization At the time of writing an IAX client can directly connect to an IAX server
148. es a telephone number Telephone numbers are only hosted on thePSTN Telephone numbers are rented from a supplier a telephone company Making or receiving telephone calls from the PSTN requires a connection to the PSTN Direct connections to the PSTN can be rented from a telephone company The PSTN is built with channels for example the pair of wires that run from your phone to a phone company switch or the channels that make up a T1 circuit A channel provides a dedicated connectio between one telephone and another telephone for the duration of the call Consult the chapter title 7 Carrier for an in depth description of T1 lines and an extremely brief introduction to SONET When you make a telephone call over the PSTN you consume a channel for the entire call Only your telephone call goes over the channel You and the called party have exclusive use of the channel for a long as the call lasts A POTS Plain Old Telephone Service line has a single telephone number associated with it Calls to that telephone number are routed over a dedicated circuit An Asterisk server connected to aPOTS line can send and receive calls over that circuit You can rent POTS lines from a telephone company if they are not out on strike You can connect thesePOTS lines to your Asterisk system Digium cards allow you to connect a POTS line to your Asterisk server There may be different companies alternate carriers in your area that provide telephone num
149. es are available is to install all Linux source packages and utilities when you first install Linux This may waste some disk spac but make your installation much simpler The Mepis distribution includes all necessary sources an libraries You should be running Linux 2 4 x You must have installed the runtime packages for bison cvs gcc and libtermcap devel Before building and then installing Asterisk you must install the full source fo the Linux kernel the source for openSSL including headers NCurses4 Ncurses C Devel SOX and the source for the readline library including headers Everything you need is included with th Mepis distribution This book assumes that you are working as the root user Mepis includes dhcp3 If you are installing the dhcp3 package for another distribution you should be logged in as a different user Wait until after you have installed and configured Linux to install any telephony hardware Don t install any telephone related hardware yet Consult the later chapters for assistance with hardwar installation and configuration The Asterisk mailing list is always a good place to start when seeking help To find the mailing lists consult the support page atwww asterisk org Support for Digium hardware is available from Digium www digium com Commercial Asterisk support is available from Signate www signate com or info signate com You can register your Mepis distribution This will provide you with access to sup
150. es are needed How many IP phones how many analog phones How many fax machines are there Are there existing telephone numbers that must be kept What will the connection to the telephone system be Analog lines or T1 Will there be multiple providers for the PSTN or long distance How many simultaneous calls will there be on average and at maximum What are the requirements for long distance service or toll free numbers Is the telephone wiring you are going to need already installed If not you will have to design and install phone wire There are other resources than this book that describe telephone and networ wiring What will the connection to the Internet be How much bandwidth is needed for the Asterisk system Is a separate Internet connection required for Asterisk What kind of Internet connection is available Is the local area network already installed If not you will have to design and install it Is it sufficient or will you need more network connections or even a new network Network design and installation is beyond the scope of this book Here are some questions designed to help you collect requirements This will help get you started it is not a complete list There are useful pre installation checklists in the appendix How many incoming lines do you have need How many incoming and outgoing calls per day do you average Do you need Emergency 911 dialing Do you need video conferencing Do you wan
151. essful and provided 600 L1 and later 1800 L3 voice channels over a pair of coaxia cables The telephone companies refer to long distance service as long haul or long lines This system stayed in long haul service from 1944 to 1984 when the breakup of the Bell System forced A amp T to move to optical fiber The last analog carrier system was the N system This system provided 12 voic channels and was used for intracity short haul O P and U systems were never put into service th emergence of T killed them In 1957 digital systems were first proposed and developed A manager at AT amp T then the only telephone company decided to skip Q R S and to use T for Time Division This was to be the world s first time division system Except for U another system that was never deployed this naming system ended The variants of Tl called T1C T2 and T4 all vanished They are survived by signals that would have been carried on all these systems These are called DS1 DS2 DS3 and DS4 The successor to theT Carrier protocols are various protocols running on optical fiber for example SONET but they don t have a letter designation The next step up from T Carrier is SONET Synchronized Optical Network SONET is a very high speed physical layer network protocol It is designed to transmit large volumes of traffic over long distances on fiber optic cables ANSI developedSONET for the public telephone network in the mi
152. et instead of the PSTN Such a call might eventually be connected back to the PSTN through a gateway elsewhere When you hear someone say Tl you will probably have a hard time figuring out exactly what they mean T Carrier discussions are very confusing because of the interchangeability of words and the confusing requirements for connecting to the PSTN A T1 line can refer to a connection that has 1 544 mbps of bandwidth It might be referring to a network that uses the T carrier electrical interface specification DSX 1 Or it might mean that the network uses one of several framing formats D4 ESF etc A Tl cable is different from a CAT5 ethernet cable Use a real Tl cable when a T1 cable is called for When extending T1 lines from the phone company drop to your customer equipment use a Tl cable not aCAT5 cable Tl cables use Individually Shielded Twisted Pair ISTP ISTP is used because of the susceptibility of Tl signals to Near End Cross Talk NEXT Unshielded Twisted Pair UTP cable characteristics are similar to ISTP However due to the unshielded characteristics ofUTP the proximity of the unshielded transmit and receive cable pairs can causeNEXT This can result in link errors if you use a CAT5 cable Various vendors may have optional Tl services that you may want Here is an example The AT amp T Digital Carrier System is referred to as ACCUNET T1 5 It is described as a two point dedicated high ca
153. fficult will it be to pull cables in your facility Do you know the local and state codes for wiring in your facility Do you have existing data lines like T1 or DSL Will these lines be shared or will new lines be needed Do you have an on site programmer Do you have an on site system administrator What is your existing network infrastructure Do you have routers hubs firewalls or switches Is there an installed ethernet Does the ethernet run to every workstation including fax machines or conference rooms What is the quality of the existing network CAT5 or CAT 3 10baseT or 100baseT or 1000baseT How heavily loaded is the existing network You should have a contract with your buyer What are you responsible for What are they responsible for What happens if the telephone system fails Are you financially responsible for any business losses What happens if a user needs to call for emergency services and the call doesn t go through Are you responsible or liable Do you have a written service agreement Who will support the Asterisk users What support hours will be required Business hours Evenings Weekends 24 by 7 How many support staff will be needed In how many locations Who wills service hardware for example servers telecom equipment or network equipment What service level agreements ar required What is the interaction between the Asterisk server and the existing network Will Asterisk shar
154. fice phone now at home communicates with your office Asterisk system over the Internet Now using your phone at home is just like using your phone in your office No one would be able to tell where you are You can take your phone on a trip and call from anywhere you have anlnternet connection You can call anyone who uses a VoIP system even if it isn t an Asterisk system Your Asterisk system has to have a connection to their VoIP system This can be a local network connection or both system can be connected to thelnternet The call is sent over the data network or Internet not the PSTN Both systems must have the correct permissions and configurations Because the VoIP telephone call is sent over your data network or the Internet there is never a long distance charge or a toll charge The charge for the telephone call is included in the price you pay fo your network orlnternet connection This is one place you save money no more toll charges or long distance charges As shown in the following illustration Asterisk users should be able to place calls to telephones connected to the PSTN This requires a connection to the PSTN Your Asterisk system has to be connected to the PSTN This is easy to do Asterisk users need a telephone number if calls are to be accepted from the PSTN You have to rent telephone numbers from a telephone company You can rent a connection to your telephone company This connection is usually some wires they buried
155. figured Asterisk for automatic startup a cronjob can stop and start the machine and Asterisk Add a provision to your startup scripts to detect and restart a hung Asterisk server Daemontools can help you accomplish this Regularly telnet into your Asterisk server to make sure it is still running Tools like mon cache big monit brother big Sister and nagios can help you monitor your Asterisk server Don t use mpgl23 for music on hold or be prepared to kill hung mpgl23 threads Often mpg123 won t terminate after Asterisk is stopped This will prevent Asterisk from restarting There should be but currently is not a quota on voice mailbox Sizes The alternative is to use the script described below that deletes all voicemail after a predetermined time Use a network sniffer to analyze your network traffic Ethereal is an superb free product and has an available IAX plug in Configure an AbsoluteTimeout value for calls that are charged This will prevent a call of unlimited length if either Asterisk or a phone fails Note thatSIP has limited facilities for detecting a disconnected client which can result in calls that do not hang up Carefully consider your hardware environment Asterisk lends itself well to shared servers Think about redundancy load balancing or clustering Stock any needed spare parts Provide in advance fo timely hardware maintenance A T1 monitoring switching device will let two Asterisk servers share a
156. for a toll free telephon number For purposes ofSMS Resp Org Changes the customer is the person firm corporation or other entity that submits the change request Customer Premises A Customer or Authorized User location at which service is provided Cutover The time and date that a change is to be made between services or implementations CTT See Computer Telephony Integration DAL See Dedicated Access Line DDD See Direct Distance Dialing DDR See Dial on Demand Routing Dedicated Access Line A non switched circuit between a carrier and a customer Dedicated Access Termination An access connected telephone available line service consisting of a continuously circuit between aCustomer Premises or serving company central office and a Company terminal to theCustomer on a full time unshared basis which is used for the origination or termination of services Dedicated Line A private line leased from a telecommunications carrier Dial Place a call on a switched telephone network This term springs for a time when telephones had dials instead of buttons Dial on Demand Routing A data connection established via dial up service Dial Place a call on a switched telephone network This term springs for a time when telephones had dials instead of buttons Dial Plan The organization that determines how calls are routed through an Asterisk system Dial Tone An audible tone
157. g a more expensiv system The manufacturer demands much more money for their more capable systems A small inexpensive PC will run Asterisk and support a surprising number of users Do you need an Asterisk system to support more users You can use a larger PC You can very easily use multipl Asterisk servers If you ever have too many users for a single Asterisk system spend a little bit mor money and put in another Asterisk server You won t be able to get the features available with an expensive proprietary system if you purchase an inexpensive proprietary system Manufacturers do not put all the features they support into all th products they sell There may be a feature you need or want that is only available with a more expensiv system Asterisk provides many features Features only available in a proprietary phone system costing tens or hundreds of thousands of dollars are now available in your free Asterisk software Asterisk has most o the features found on any high end proprietary telephone system Asterisk is an open source product sponsored by Digium http www digium com is the digium URL No company owns it A user community has grown up around Asterisk When a developer from any organization adds a new feature you get that feature too Unlike proprietary systems you can easily add your own features As it is new Asterisk may still lack a few features here and there but it is easy to add new features to Asterisk When s
158. gh a Linear G 711 Mu La a G 711 A Law ADPCM a ILBC a LPC 10 a MP3 decode only Commercial support for Asterisk development and Digium hardware is available from http www digium com Asterisk training and Asterisk support is available from Signate at http www signate com You can learn a great deal about Asterisk by joining the mailing lists and reading the many messages sent each day or saved in the archives Participation will help anyone with a serious interest in implementing an Asterisk system or coding on the Asterisk project The Asterisk mailings have three lists asterisk users asterisk dev and asterisk announce The asterisk users and asterisk dev are for users with implementation and support questions They are helpful for developers who want to participate in the technological discussions about Asterisk You can subscribe for individual messages or a daily digest version Mark Spencer is the author of Asterisk and its primary sponsor Digium Inc Mark uses the mailing listasterisk announce lists digium com for infrequent major update announcements and press releases Subscribe or unsubscribe to Asterisk mailing lists at http lists digium com mailman listinfo asterisk announce A hittps lists digium com mailman listinito asterisk users A http lists digium com mailman listinfo asterisk dev Alternatively send e mail to mailman lists digium com with help in the subject
159. gh density redundant applications Asterisk supports every possible kind of telephone technology The technologies include VoIP SIP H 323 IAX and BGCP for gateways and phone Asterisk can interoperate with almost all standards based telephony equipment Hardware to connect your Asterisk system is inexpensive Asterisk supports traditional telephone technologies likelSDN PRI and T Carrier including T1 and E 1 Telephony applications include calling conferencing call bridging voicemail auto attendant custo Interactive Voice Response scripting call parking intercom and many others An Asterisk server connected to a local area network can control phones connected to that local area network These phones can call each other through the Asterisk server The Asterisk server can contro phones connected to other networks or thelnternet even if those phones or the Asterisk server are behind firewalls With Digium FXS interface cards an Asterisk server can control local analog telephones FXO and T carrier interface boards from Digium can connect an Asterisk server to the PSTN This allows calls to be made to and from thePSTN PSTN users can call phones controlled by the Asterisk server Asterisk phones can call users on the PSTN Calls can be switched from one Asterisk server to another Asterisk server A telephone controlled by an asterisk server can call a telephone controlled by a second Asterisk server A call from a telephon controll
160. h to provide a profit for everyone in the distribution chain the manufacturer distributor representative retailer etc The cost of designing and manufacturing spread over a relatively few systems from a single manufacturer This makes proprietary systems ver expensive Asterisk is built with commodity PC hardware Event the most sophisticated industrial strength PC is far less expensive than any traditionallPBX Since a PC is a commodity PCs are inexpensive and your Asterisk system is inexpensive You may need interface boards to support telephony For example you may need a board that will let you hook up to an incoming telephone line You may want a board that lets you connect fax machine in your office to your Asterisk system The boards you add to the PC from companies like Digium ar inexpensive An Asterisk system is far less expensive than any proprietary telephone system you migh consider buying for your business Proprietary systems are classified by their manufacturers by features Do you want voicemail that s more hardware and more money Do you need a system that supports more users That s a larger mor expensive system A proprietary system will cost more for every feature you want Features like voice mail and anInternet connection will be expensive Each proprietary system in a manufacturer s product range is limited to a certain number of users Adding more users requires adding more expensive cards to the system or buyin
161. he Exchange Carriers Standards Association ECSA for the American National Standards Institute ANSI ANSI sets industry standards in the U S for telecommunications and other industries T1 or DS 1 A high speed telephone connection providing 1 544 mb of bandwidth T2 or Ds 2 The equivalent of four T1 lines providing 6 312 mb of bandwidth T3 or Ds 3 The equivalent of 28 T1 lines providing 44 736 mb of bandwidth T4 of Ds 4 The equivalent of six T3 channels providing 274 176 mb of bandwidth T Carrier The generic designation of several different digitally multiplexed telecommunications carrier systems TCP See Transmission Control Protocol TDD Telecommunications Device for the Deaf Tariffs See Rates and Tariffs Telco See Telephone Company Telephone User equipment used for sending and receiving voice frequency signals including voice and touch tones Telephone call A connection maintained over time used to send and receive voice frequency signals Telephone Company A company that owns and operates lines to customer locations and central offices Terminal Equipment Devices apparatus and their associated wiring such as teleprinters telephone handsets or data sets interconnected to service Telephone Switch A switch that switches telephone calls Termination Gateway Computer equipment that provides an interface between an IP network and thePSTN Terms of Service The
162. his example creates four contexts Each context has a different access level to the PSTN First dialing nine connects the caller to a channel for an outside line The ignorepat command instructs Asterisk not to stop dialtone after the nine is dialed This makes sure the user will still hear dialtone after dialing nine The local context can only dial a seven digit number The long distance context permits 1 dialing The international contexts provides for dialing an international access number which starts with 011 The following example dials out to Voicepulse the SIP and IAX provider exten gt _1NXXNXXXXXX 1 Dial IAX2 baV36Q0Ym51 voicepulse EXTEN Phones may be missing they can be turned off or disconnected from the network Asterisk treats a missing phone asbusy not as unavailable Asterisk uses the status unavailable when a phone remains unanswered When interacting with a remote system the remote system may prompt to press the key to continue To keep the local Asterisk system from capturing the and executing a transfer don t use a T or tin the option for an outbound dial string exten gt 91xxxxxxxxx 1 Dial H 323 Exten EMAIL PROTECTED exten gt 1236 1 Dial Console dsp Ring forever Zaptel dialing uses the Zapata chan_zap analog card channel driver The syntax for a Zaptel dialing string is The syntax is Zap group port span port extensio Here are some examples of dialing with Zap Zap g1 12394
163. hones and other SIP devices are described in other chapters You can find help for telephone configuration through he Asteris mailing lists and archives or from the telephone manufacturers support facilities Make sure you ca ping the phones from the Asterisk server Go to the directory etc asterisk Save copies of the files sip conf extensions conf and voicemail conf Replace the contents of these files with the configuration files found in the directory simple config o the CD Be sure that the ownership and permissions for the configuration files remain unchanged This configuration allows two SIP phones to call each other Unanswered calls will be connected to voicemail Voicemail can be directly dialed too In this example one SIP phone is going to call another SIP phone You must configure any SIP phones before attempting to use them with Asterisk This may require reloading a different firmwar image to the phone Here is a simple configuration file for a Cisco 7960 that will work with the sampl Asterisk configuration This file is sent to the telephone withTFTP 7960 SIP Configuration File image_version P0S3 06 0 00 preferred_codec g llulaw Line 1 appearance line1 4035 Line 1 display name used for caller i linel_displayname 415 555 1212 Line 1 Registration Authenticatio linel_authname 4035 Line 1 Registration Passwor linel_password cisco Line 1 Short Nam linel_shortname 4035
164. ial Zap 1 EXTEN ex3 exte gt _ 1l Playback sorry no metch exten gt _ 2 Hangup Contexts can provide authentication services For example a user could be required to have a passcode to move from one context to another Contexts can easily support PBX multi hosting For example if two companies were sharing a single Asterisk server incoming calls could be routed to the dial plan for the correct company based on th incoming DID number Here is an example from Eric Wieling zap incoming DIDs for Microsoft exten gt _2126661XXX 1 GoTo microsoft EXTEN 1 exten gt 5046662000 1 GoTo microsoft EXTEN 1 exten gt 5046662500 1 GoTo microsoft EXTEN 1 DIDs for Sun Microsystem exten gt _6165551XXX 1 GoTo sun EXTEN 1 exten gt 2285552000 1 GoTo sun EXTEN 1 exten gt 2285552500 1 GoTo sun EXTEN 1 microsoft exten gt 2126661000 1 Dial SIP 1000 exten gt 2126661001 1 Dial SIP 1002 exten gt 2126661002 1 Dial SIP 1002 exten gt 5046662000 1 Dial SIP 2000 exten gt 5046662500 1 Dial SIP 2500 sun Extension contexts can be combined with external scripts and the Asterisk application app_qcall to implement callback services Asterisk could prompt an incoming caller for a number and then initiate call back to the supplied number Since a context can reference an external Asterisk system the external system can add to the functions of the local system Using IAX the
165. ice Call A call placed with the assistance of an operator Operator Station Service that requires the assistance of an operator to complete a call Optical Carrier Series of physical protocols including defined for SONET optical signal transmissions OC signal levels put STS frames onto multimode fiber optic line at a variety of speeds The base rate is 51 84mbps OC 1 each signal level thereafter operates at a speed divisible by that number thus OC 3 runs at 155 52mbps Other Common Carrier A common carrier that was not part of the original AT amp T system Out of Band Signals sent on a channel separate from the data PABX Private Automatic Branch Exchange see Public Branch Exchange PAX Private Automatic Exchange see Public Branch Exchange PBX See Public Branch Exchange PCM See Pulse Code Modulation Personal Identification Number A number used as a security code in order to restrict unauthorized access to an account or service Person to Person An operator assisted call only completed to a named individual PIC See Primary Interexchange Carrier POTS Plain Old Telephone Service PIC Freeze Prevents long distance services from being changed to a new vendor PIC Request A request sent to a LEC that contains a response code indicating if the requested service was performed PIN See Personal Identification Number Point of Presence A location where
166. icemail box for the sales department Each of the three users i sales is sent an e mail message letting them know that there is a new sales call Asterisk is a software implementation of a PABX A PABX usually called a PBX is a Private Automatic Branch Exchange A PBX is private because the enterprise owns it not the telephone company The telephone company can still be a supplier or service provider Originally PBX equipment was analog more recent PBX equipment is digital A PBX is cost attractive because it is less expensive to use a PBX than a separate phone line for every user in the enterprise and because it provides more services With a PBX lines from the telephone company can be shared instead of having a separate line to the telephone company for each user APBX provides a place for trunk multiple phone lines to terminate at the enterprise APBX is a telephone system that services an enterprise by switching calls between enterprise users on local lines and by sharing the external phone lines ThePBX has the intelligence to switch calls within the enterprise and outside the enterprise A PBX provides features and capabilities not available with direct connections to the Public Switched Telephone Network PSTN A PBX moves telephone functions from the phone company to the enterprise APBX provides additional functions and features like interactive voice response call waiting conferencing or voice mail paging transferring calls or
167. ignaling CAS A method of signaling each traffic channel instead of having a dedicated signaling channel likeISDN The signaling for a Circuit is permanently associated with that circuit The common forms are loopstart groundstart Equal Access North American BANA and E amp M The disadvantage of CAS Signaling is its use of user bandwidth for signaling As well as call reception CAS signaling can processes Dialed Numbe Identification Service DNIS and automatic number identification ANI information Route Diversity Two channels furnished partially or entirely over two physically separate routes RTP See Real Time Transport Protocol Service Management System A system used to manage services Simple Network Management Protocol A protocol that provides for the remote management of network connected equipment SIP Session Initiation Protocol Skinny Cisco proprietary VoIP protocol Slam Changing a customers long distance provider without their permission SMS See Service Management System SNMP See Simple Network Management Protocol SONET See Synchronous Optical Network Special Access Surcharge A charge imposed by a Local Exchange Carrier in accordance with Section 69 115 of the FCC Rules and Regulations Speed Dialing A service to dial numbers by dialing fewer than the usual number of digits State Tax The taxes that each state is allowed to charge States are allowed to charge t
168. il 0 exten 0 5 Hangup As the 0 extension is first executed Asterisk switches the call to Zap 9 If there is no answer or if the phone is busy Asterisk attempts to switch the call to three other extensions Zap 10 Zap 11 an Zap 12 If none of these extensions answer the call is switched to the operator s extension zero voice mail In this case no announcement is played Here is an example of least cost routing on outgoing lines If a ZAP channel isn t available the call will go out over an IAX channel exten gt _9NXXXXXX 1 Dial Zap g2 BYEXTENSION exten gt _9NXXXXXX 2 Dial IAX oh BYEXTENSION exten gt _9NXXXXXX 3 Congestion This example demonstrates pattern matching This shows that everything in an Asterisk dial plan is treated as an extension even if it s an outgoing line Asterisk first tries to switch the outgoing call to any interface in group 2 If that interface is unavailable Asterisk tries to switch the call to a different IAX host named oh If this connection fails the congestion tone is played Here is a simple Main Menu dial plan exten exten exten exten exten gt s 1 Wait 1 gt gt exten gt gt gt gt gt gt Answer DigitTimeout 5 ResponseTimeout 10 Background intro Background instructions Goto sales Goto support Playback pbx invalid Goto Ss 6 Goto 0 1 exten exten exten exten exten tree DNoOrROO DDH DW ee a a E H R
169. ile and try compiling again At the time of writing the complete guide to Red Hat 9 installation could be found at https www redhat com docs manuals linux You should have the Red Hat Linux version 9 Installation media Boot the PC with the Red Hat Linux 9lnstallation CD At the selections during installation choose the language keyboard and mouse settings If there is an existing operating system installed on the computer you will be given an opportunity to Perform a new Red Hat Linux Installation Next choose a custom installation Configure your disk partitions boot loader and network setting At the dialog for firewall configuration selectNo Firewall Select the language time zone root password and authentication settings for your system In the package group selection screen scroll to the bottom and select Minimal Installation and Select Individual Package At this screen select Flat View From the displayed list select the following packages gcc A kernel source A libtermcap devel A newt devel A D gt ncurses devel openssl096b A openssl devel A readline42 A realine devel The next screen shows the required dependency packages Select next to install the required packages andnext again to start the installation When the installation has finished you will be given the choice to create a boot disk After this step installation will be complete The CD willeject Click on the exit button This will restart
170. iled understanding of these protocols could be necessary if you decide to become an Asterisk developer Open VoIP separates calling into bearer IP RTP streams services and call control Standards define each of these three protocol stacks This book assumes you are already familiar with networks and TCP IP There is no attempt here to describe basic networking There are many excellent references for this Data networks both IP and ATM are packet based Packet networks are obsoleting circuit switched networks IP is particularly attractive for data transport IP is a transparent transport layer It is a widely adopted standard and provides the most common application interface IP transparently transports data endto end regardless of the application Packet loss is common in IP networks IP networks are self healing Dynamic routing protocols allows a network to re converge to overcome packet loss or to find the best possible route Dynamic routin means the packets in a data stream can travel separate paths This means that packet transit and arriva times can vary from packet to packet Packet loss is a normal occurrence in an IP network TCP IP uses packet loss to control packet flow If a packet is lost TCP re sends the packet TCP uses packet loss to tune packet transmission ITU T recommends a one way packet delay of no more than 150 ms This is why TCP suffers over a satellite link TCP does not deal well with
171. ing the application andDSP the fourth digit indicates the ARM processo P O Is protoccl S forSiP O for Skinny 3 0200 the name of theSIP image in this case version 02 00 There are two types of configuration files that are available to a 7960 The configuration file that is namedSIPDefault cnf contains configuration information that is applied to all SIP phones Open the file with the editor of your choice Near the top theSIP image version is listed Image Version image version POS3020 You may encounter problems configuring a 7960 for SIP even if you follow the directions below exactly If you do encounter problems and your phone doesn t accept the configuration files edit th SIPDefault cnf file and remove all the comments Lines with comments start with a character Make sure the image POS30200 is specified in OS79XX txt as shown above If the SIP image named in this file is different than theSIP image already in the phone s flash memory the phone will attempt to download the image named inOS79xXxX txt from the TFTP server and save it in flash memory Any SIP image to be downloaded to the phone must be in the TFTP directory The SIP parameters in this file are applied to every phone If you change these files all the phones on your network will be affected You can use phone specific files as shown in the next section section 7 without a SIPDefault cnf In this case you will have to provide p
172. interfaces exten gt 100 2565551212 1 Congestion exten gt 100 1 Dial Zap 9 amp IAX paul s 15 exten gt 100 2 Voicemail u600 exten gt 100 102 Voicemail b600 If the incoming caller has the Caller ID of 256 555 1212 they are immediately routed to a congestion tone This makes it sound to the caller that the number they called is wrong or inoperative Otherwise theDial application calls both Zap 9 and another remote IAX host marko at the same time If there is no answer the call is switched to voicemail where they get the unavailable message If both interfaces are busy the call is switched to voicemail where they get the busy message Here is another example that rings several extensions at the same time as suggested by Chris Hariga exten gt s 2 Dial SIP paul amp SIP pauloffice SIP jerry amp SIP jerryhome SIP sa amp SIP xten Call distribution can be automated For example take a sales department where the manager wants all the sales people to participate equally in incoming calls Automated call distribution can randoml assign the next incoming call to a sales extension exten gt s 3 DigitTimeout 5 Set Digit Timeout to 5 seconds exten gt 600 2 Echo Do the echo test exten gt 2 Hangup Hang Up exten gt 1234 2 Macro stdexten 1234 CONSOLE exten gt 8600 1 Meetme 1234 exten gt 1234 1 Playback transfer skip Please hold while exten gt s 4 ResponseTimeout 1
173. inux redhat 9 en os i386 RedHat RPMS screen3 9 13 5 1386 rpm rpm Uvh screen 3 9 13 5 1386 rp Consult the manual page for the screen command for usage instructions The expire messages facility finds messages more than X days old and deletes them expire messages reorganizes every mailbox folder Older messages have lower numbers For example msg0000 is older than msg0005 The expire message routine deletes and then renumbers messages File deletion is done with the find command If someone checks their voice mail during expire message processing they may have a problem accessing messages They may need to wait until the reorganization is finished before they will be able to access their voice mail This is a good reason to expire messages in off hours At the time of writing version 1 0 of Asterisk is available For a production system you should use the most recent version of the 1 0 release not a development branch The Asterisk sources are rapidl changing This includes bug fixes You should get a newer version of the source if there is somethin broken in your system that the new release fixes Always thoroughly test any new release in a separate test environment before putting it into production Infrequently the most recent version of Asterisk may be broken If you put a broken version into production you will have a broken production server and upset users Asterisk is a complex product that works in
174. ions in a context named general general port 5060 TheTCP IP port for SIP communications 4035 type friend username 4035 secret cisco context from sip ca Bill lt 415551212 gt qualify 100 host dynamic This host is not on the same IP addr every tim canreinvite n mailbox 4035 defaultip192 160 0 12 This device takes and makes calls Activate the message waiting lightfor message 4009 type friend username 4009 secret cisco context from sip eca Paul lt 4155551212 gt qualify 100 This device takes and makes calls host dynamic This host is not on the same IP addr every tim canreinvite n mailbox 4009 Activate the message waiting light for message defaultiply2 168 0 12 There is no particular order to these two extensions within the context When Asterisk starts the extensions are loaded into memory in numeric order In this example extension 4009 will appear i memory ahead of extension 4035 Asterisk parses a context before it parses any includes within the context Because of this the include statement can change the execution order of extensions within contexts Here is an example with fou contexts This example assures that the contexts are executed in the order shown ex ex1 ex2 and then ex3 ex include gt exl include gt ex2 include gt ex3 exten gt h 1 Hangup ex1 exte gt 1234 1 Dial SIP 1234 exten gt 9992 1 Dial SIP 9992 ex2 exte gt _9 1 D
175. is increases the total bandwidth to 1 544mbps 24 64 Kb DSO channels taken together provide 1 536 mbps A T1 provides 1 544 mbps of bandwidth The extra bandwidth comes from the Frame bits T1C frames differ as they are made u of 1272 bits T Carrier uses pulse code modulation and time division multiplexing The time division multiplexing is illustrated in the following figure A frame is sent in 125 micro seconds T Carrier uses four wires and provides duplex capability Two wires are used for receiving and two for simultaneous sendin One Frame 193 Bits 0 23 0 23 0 2 Time Slot 1 Time Slot 2 Time Slot 24 Figure 15 2 Data Frame In North America Canada Hong Kong and Taiwan two framing formats are in use Superframe and Extended Superframe A Superframe consists of twelve 193 bit frames A framing bit can support different functions depending upon which of the twelve frames it is in There are two types of framing bits Termina framing Ft and Signaling framing Fs bits With Superframe the standard frame is 193 bits long and includes 1 Framing bit plus 24 8 bit time slots Each Superframe time slots is scanned at a rate of 8000 times per second Therefore in one second there are 8000 8 bits TS 24 TS 1 536 000 Bits of payload data transmitted There are 800 1 8 000 bits of synchronization bits transmitted within a one second interval Therefore the tota aggregate rate of the Tl signal is 1
176. is only useful for all the calls are between two specific Asterisk servers This is frequently the case for example betwee two branch offices or with a connection to a service like Voicepulse IAX2 supports PKI style security and trunking TDMoIP protocols other than Asterisk allocate bandwidth to keep all channels open IAX trunking only uses the bandwidth needed for calls i progress Trunking requires that both sides are valid peers Use a register Statement to register with the systems you want to trunk with Note that trunking requires that a timing source be available The switch command in extensions conf connects dial plans between an IAX client and an IAX server When a switch command is used the connection between the IAX client and the IAX server is hel permanently open The switch statement in extensions conf allows two Asterisk servers to share a dial plan Here are several examples from the Wiki page aefeult exten gt _801XXX 1 Goto left EXTEN 1 exten gt _802XXX 1 Goto right EXTEN 1 left exte gt _801XXX 1 StripMSD 3 exten gt _XXX 2 Goto 1 switch gt IAX left right exte gt _802XXX 1 StripMSD 3 exten gt _XXX 2 Goto 1 switch gt IAX left and the same for right In extensions conf outbound switch gt IAX2 master secret iax gwl company net outbound slave type user auth plaintext context outbound context outbound2 can have multiple if you want Sec
177. itten to You should see log messages as the phone requests the dual boot file the generic configuration file and the phone specific configuration file The phone will lastly display at the bottom Phone Unprovisioned This message is displayed because no SIP proxy server was selected The SIP proxy server is found in the default configuration fil Proxy Serve proxyl_address 192 168 1 1 Proxy Server Port default 5060 proxyl_port 506 Check the phone status for any error messages Any error messages can be corrected by configuring the SIP parameters Note that the phone may fail to convert to the new SIP firmware If this happens check the network settings for the phone The tftp server listed may not be right Unlock the phone and change the tft server address manually to the correct address and try booting the phone again To convert or program a 7960 for version 2 0 SIP to version 2 2 download the SIP image POS30202 bin from the Cisco to your TFTP data directory Edit the file OS79XxX TXT and change the contents toPOS30202 Edit the file SIPDefault cnf Change the image name to Image Versio image_version P0S3020 These files should be in the TFTP data directory TABLE 13 4 OST OX DXE SiIpbpetaule cnt SIPSilPmacacdress cnt RINGLIST DAT ringerl pcm ringer2 pcm P0S30202 bin Note that you may also have to have a phone specific file with the os version to convert to SIP version A 2 2 Copy the
178. k does not yet have a feature you want it is either already under development or easy to add Any feature added to Asterisk by any user will be available for yo to use This is because Asterisk is an open source product distributed under a GPL license Asterisk is open source It implements communications in software instead of hardware This allows new features to be rapidly added with minimal effort You can easily make your own changes or additions With its included support for internationalization rich set of configuration files and ope source code every aspect of Asterisk can be customized to meet your needs New interfaces and technologies are easily added to Asterisk With Asterisk you can take control of your communications Once a call is in your Linux sever with Asterisk anything can be done with it Asterisk gives you fine grained control over every aspect of your communications Scenario A Home Office Julie is an outside sales rep for a company in Chicago She covers the Southwestern region and lives in Phoenix Julie has aDSL line coming in to her home office The head office has an Asterisk server The head office has a hig speedinternet connection Julie has a telephone on her desk that connects to her DSL line A caller contacts the Chicago office by dialing the Chicago 800 toll free telephone number of th head office The caller listens to the directory of extensions for the sale department The directory gives choice
179. king before attempting more complex configurations Your goal for this configuration should be making a call from one phone to the other phone The SIP phones could be hardware or soft phones The example shows the configuration with Cisco 7960 telephones You will have to learn how to configure your phones to work with this simple configuration SIP phone configuration is not shown in this chapter This simple configuration will allow two phones networked to the Asterisk server to call each other The example configuration supports the Digium four portFXS board The previous section on configuring voicemail shows how voice mail should be configured for this simple example Remember that a more complex set of sample Asterisk configurations are created by running the make command make samples from a Linux command prompt while in the usr src asterisk directory This simple configuration is less complex than the examples provided in usr src asterisk configs You should read these Asterisk supplied samples to learn more about Asterisk configuration Running the Asterisk server on a separate subnet or even better a separate physical network will make your first configurationmuch easier Consider starting with the Asterisk server a hub or switch and twoSIP telephones Connect Asterisk and two IP phones to the network Make sure the two IP phones are properly configured for SIP and Asterisk Configuration for several manufacturer s p
180. l of support This is completely consistent withou exception among all of the major manufacturers There is now finally hope after 15 years of this type of severe dysfunction The Zapata project named after the famous Mexican Revolutionary is an attempt to address these issues in a practical and livable manner As with SIP or IAX Zaptel provides communications channels Calls can arrive or leave over Zaptel channels The dial plan determines how these calls are processed Digium Wildcard boards are Zaptel hardware devices They share a common driver suite the Zapata Telephony Driver Suite Zaptel for short and a common interface library The immediately following sections describe various Zaptel boards that are available from Digium Configuration of the cards and Asterisk is then described in the following sections The Wildcard X100P provides a single port FXO PCI interface card for interfacing with a standard analog phone line This board allows Asterisk to answer calls from a service provider s standard analog line or to receive calls from anotherPBX over TDM without the use of T1 hardware The X100P is ideal for Interactive Voice Response andVoicemail applications Figure 08 1 X100P The X100P supports all standard enhanced call features including CallerlD Call Conferencing and Call Waiting CallerID The X100P supports FXS Loopstart and Kewlstart Loopstart with far end disconnection supervision It can detect ringing
181. lash Flashes a ZapTrunk ZapBarge Barge in monitor Zap channe ZapRAS Executes ZaptelISDN RAS application Directory Provide directory of voicemail extension HasNewVoicemail Conditionally branches to priority 10 MeetMe Simple MeetMe conference bridg MeetMeCount MeetMe participant coun VoiceMail Leave a voicemail messag VoiceMailMain Enter voicemail syste deprecated VoiceMail2 Leave a voicemail messag deprecated VoiceMailMain2 Enter voicemail syste VoiceMail version 1 is now replaced with VoiceMail version 2 so al voicemail commands leads to voicemail version 2 AddQueueMember Dynamically adds queue member AgentCallbackLogin Call agent callback logi AgentLogin Call agent logi ParkAndAnnounce Park and Announc ParkedCall Answer a parked cal Queue Queue a call for a call queu RemoveQueueMember Dynamically removes queue member Asterisk app_dbodbc dial plan modifiers using unixODB Asterisk cmd DynExtenDB Store extensions in databas app Prepaid Designed for Postgre The following enhancements are provided for extensions within extensions cont exten gt s 5 BackGround blabla The parameter blabla can be quoted for example blabla A comma does not terminate a quoted parameter Characters special to variable substitution and expression evaluation can be escaped For example to use a literal in the string 1231 escape it with a preceding The special characters must be escaped
182. lephone SNOM phones are a SIP client and communicate with aSIP server SIP is described in a separate chapter Figure 14 1 Snom 200 Telephone The Snom phone is easy to configure for Asterisk The Snom has a built in Web server Because it has a built in Web server you can configure the phone with a browser Just supply your browser with th ip address of the telephone you wish to configure There are several useful documents on the snom Web site in the FAQ section You can download these FAQs fromhttp www snom com fag _en php This is a very useful link for technical information You should check it periodically or when you encounter a technical issue Some of the issues covered in the FAQs include using snom phones with Asterisk Configuring snom phones for Mass Deployment Dial plan on snom phone How to update the firmware for a Snom phone Operating SNOM phones behind NAT FF HF F Power Over Ethernet e Setting up DHCP for snom 100 200 e Configuring Cisco Call Manager for snom Phones Several useful documents are available on the ABP Tech website under Support FAQs You can download these documents from http www abptech com mainpages support faq index html Available documents includ e How to update snom phone firmware with TFTP e Setting up a snom phone behind LinkSys UPnP router e Using the programmable keys on the snom 200 If your snom 200 telephones are operati
183. like local or long distance calling You can usually get long distance or international calling from a variety or providers A new generation of telephone companies provides the best of both worlds These companies will provide telephone numbers and route calls over the Internet or PSTN You can connect to an Internet telephone company that provides a bridge to the PSTN Instead of a connection to thePSTN you use a connection to the Internet A call placed to your telephone number is sent from that provider to your Asterisk server over thelnternet A T Carrier circuit can connect to a telephone company or to an Internet provider T Carrier lines connected to a telephone company use the individual channels for individual telephone calls A T1 used for a network or Internet connection uses all the T1 channels to transmit data Different kinds of data including voice share all the channels Different kinds of data are sent over the connection simultaneously All the available bandwidth of the line is shared to send data A T1 line with a public line interface that is connected to a telephone company can support only twenty three simultaneous calls Because voice compresses well more concurrent calls can be place over a T1 line where all 24 channels are used for a data network connection The number of call depends on the compression scheme you select More calls can be sent at the sacrifice of voice quality Good quality networking equipment can
184. line A tie line is a permanent circuit between the tw offices This is often a T1 or E1 or fractional T1 or E1 For a tie line to be effective it must be les expensive that using thePSTN This is of course a function of call volumes and distance You can obtain VoIP service from an outside vendor like Signate http www signate com The VoIP system is at their site Your local phones connect to their system through thelnternet or a point to point connection They will maintain the system for you and provide you with the telephone numbers you need The only equipment you need in your office are your telephones or fax machines You may want to host your own VoIP system off site For example if you rent space for all your Internet related equipment at a hosting center you may want to put your VoIP system there You could share the data connection from your office to your hosting center for voice and data The phone company provides this service It is called Centrex When you host your own Asterisk server you can get all the facilities ofCentrex at a fraction of the cost You may want to share one Asterisk system between several offices You could use data connections between the offices to share the single Asterisk system Many small businesses do not need all of a T1 connection If you are in a location near other small businesses you may be able to share a T1 connection with your neighbors If you are friends with you neighbors at home
185. ll calls arrive on a channel for example a SIP channel An incoming SIP call starts with a connection to aSIP channel There is a configuration file for every type of channel for example sip conf for SIP channels Here is an example ofsip conf This example has a single context named general Note this is not the same as a context inextensions conf general port 5060 TheTCP IP port for SIP communications bindaddr 0 0 0 0 Address to bind to context from sip Default for incoming call The context in this example links this sip conf context to a context in extensions conf In this example the context comman names from sip Any call on the SIP channel will be by default processed by the context from sip in extensions cont Here is a sample from extensions conf that supports outgoing SIP calls from sip exten gt _ 26 1 Dial SIP S EXTEN 3 inoc dba pch net exten gt _ 26 2 Congestion exten gt _ 26 102 Busy The SIP dialstring depends on the channel A SIP dialstring is specified as The format of a SIP dialstring in extensions conf is SIP or SIP peer exten Peer is either a service defined in sip conf or a domain name or the hostname of a SIP Proxy server Asterisk must register with an external SIP server to accept incoming calls from that server The registration notifies the foreign server where the SIP calls should be sent here are two examples of SIP registration with a foreign server
186. ll the channels for all the boards even if they are not all in use Here is an example with three Digium boards zaptel con TIQ0p TL Din span 1 0 0 esf b8z amp m 1 24 TDM400p fxs lin fxoks 2 X100P fxo lin fxsks 2 loadzone u defaultzone u In the example above X100P is an FXO card This card is designed to accept a connection from the PSTN Note that the configuration for the card shown above lists the configuration as fxsks not fxoks In this example the TDM400p board only has one fxs module installed and the other three position are empty Even so the X100p card appears on channel 29 FXO and FXS signalling is the reverse of the type of signalling for the interface itself FXS interfaces are signalled withFXO and FXO interfaces are signalled with FXS Only a single line is required to configure each interface For example fxsks 1 fxoks loads the FXO device as channel one and the FXS device as channel two Zaptel drivers may conflict with other drivers For example Digium drivers will often require the same interrupt as the USB interface You may have to unload drivers that conflict with the Digium drivers To see a list of loaded drivers run the command lsmo To unload a driver use the command rmmo The program ztcfg reads the configuration information in zaptel conf and configures the drivers You must runztcfg each time zaptel driver are loaded for example after booting the machine You can ru
187. lly review rerecord or save voicemails after leaving them Optionally review rerecord or save busy unavailable and name prompts Optionally allow dialing out from within voicemail Optionally allow calling back of the person who left voicemail Several compression types are supported for storing voicemail For voicemail messages forwarded to email the first type named is used to compress the message general Default formats for writingVoicemail format g723sf wav49 wa format wav49 gsm wa The total number of voicemails that can be saved at your Asterisk system depends on your hardware and especially available disk space It depends on the codec you select for compressing voice mail There can be additional overhead in voicemail from translations between the codec for the incomin call and the codec used to record the call The file etc asterisk conf holds voicemail related configuration settings Consult the voicemail conf sample file shown below for additional information The permissions of voicemail conf must allow Asterisk to write to this file The directory var spool asterisk vm holds voicemail related files for example messages This can be changed in etc asterisk CONT Two applications are used in extensions conf voicemailmain and voicemail The voicemail application returns a 1 if a mailbox cannot be located or if the caller hangs up Otherwise it returns a zero Calls are placed to a user A use
188. logistics Cylogistics is a specialty distributor serving the open enterprise reseller community with a special focus on telephony including VoIP IP amp SIP technology www cylogistics com 800 749 2734 How do you get to a working Asterisk system Here is your map You must Find out what the business requirements are talk to management and users Document the current functionality What does the existing system do How does it do it Design an Asterisk installation that meets existing and new requirements Design and install any needed infrastructure including a local area network Internet connection or telephone network connection Design and build the Asterisk system including the server and peripheral equipment Configure the Aterisk system for your environment Install the new system Test the new system including all connections and echo suppression Document the system including operating procedures and user guides Train the users Deploy the new system Support and maintain the system Backup and monitor the system Periodically upgrade the system Plan for disaster recovery Each of these steps is vital If you get any of these steps wrong your project will fail Talk to your users and management to determine your business needs What features do the users require How much voicemail will there be How many users are there now How many users will there be in the future How many phon
189. m Signate or use cvs to copy the most recent version of Asterisk to your computer Use cv to copy the most recent version of Asterisk to your computer Your Asterisk server must be connecte to thelnternet to download the source code CVS must be installed on your computer CVS is automatically installed with Mepis You must have root permission to perform these operations From a shell at the command prompt execute the following commands cd usr sr export CVSROOT pserver anoncvs cvs digium com usr cvsroot After issuing the following command you will be prompted for a password use anoncvs cvs logi The following commands will create three directories within usr src named zaptel libpri and asterisk You must of course have Internet connectivity for this command to work This command will checkout the Asterisk sources to your server cvs checkout zaptel libpri To check out the stable release instead of the development release use the command For an Asterisk server you plan to put in production you should use this version cvs checkout r vl O_stable asterisk To check out the development branch use the command cvs checkout asteris The cvs command will display many lines as the various sources are checked out of cvs and copied to your Asterisk server Next install any Digium cards Reboot the computer In some Linux environments for example Red Hat Kudzu may inform you of the new hardware Allow Linux to
190. mand prompt issue the following commands Please note that the order of these commands is important The commands should be executed in the order shown cd zaptel make clean make instal ed libpr make clean make instal cd asteris make clean make instal make sample The Asterisk compilation can take ten minutes or more depending on your computer The other compilation steps should finish in a few minutes or less A later chapter shows how to run Asterisk You will need to configure Asterisk before you run Asterisk You are now ready to configure Asterisk Asterisk configuration is described in a later chapter Use make update to update Asterisk to a more current version After an update restart Asterisk for the changes to take effect Compiling builds any drivers required for the installed telephony hardware You do not need to restart your server after these compilation steps The last step the make of the samples creates a variety of sample configurations Configuration is described in a later chapter You may be using a Via motherboard with a C3 processor If you are you may get the error message Via C3 is not an i168 Compiling the Zaptel package requires a version of the kernel sources that matches the kernel version running on your system Check the version with following commands cat proc versio uname The output from this command will be similar to Linux version 2 4 28 rootlocalhost gcc versi
191. me of call AddQueueMember Dynamically adds queue member ADSIProg Load Asterisk ADSI Scripts into phon AgentCallbackLogin Call agent callback logi AgentLogin Call agent logi AgentMonitorOutgoing Monitor Outgoing Agent Calls 0 7 3 AGI Executes an AGI compliant applicatio Answer Answer a channel if ringin AppendCDRUserField Append data to the CDR user fiel Authenticate Authenticate a use BackGround Play a file while awaiting extensio Busy Indicate busy condition and sto CallingPres Change the presentation for the calleri ChangeMonitor Change monitoring filename of a channe ChanIsAvail Check if channel is availabl Congestion Indicate congestion and sto Cut String handling functio DateTime Say the date and tim DBdel Delete a key from the databas DBdeltree Delete a family or keytree from the databas DBget Retrieve a value from the databas DBput Store a value in the databas Dial Place an call and connect to the current channel DigitTimeout Set maximum timeout between digit Directory Provide directory of voicemail extension DISA DISA Direct Inward SystemAccess EAGI Executes an AGI compliant applicatio Echo Echo audio read back to the use EnumLookup Lookup number in ENU Eval Evaluate arguments before calling applicatio Festival Say text to the use Flash Flashes a ZapTrunk GetCPEID Get ADSI CPE I Goto Goto a particular priority extension or contex GotoI Conditional got GotolfTime Co
192. miliar with the information in this chapter in order to design install and configure an Asterisk system If you are already familiar with IP Telephony and standard telephony including T Carrier you may wish to skip this chapter For more in depth information aboutT Carrier consult the later T Carrier chapter IP telephony protocols for exampleSIP are described in a later chapter There are many excellent books about telephony if you wish more in depth information for example Voice over IP Fundamentals by Jonathan Davidson Two separate networks are available the PSTN and the Internet They each provide different services Telephone numbers are used to address a specific device on the PSTN IP addresses are used to address a specific device on thelnternet Because the public telephone network is optimized for voice it is not well suited for data transmission Since voice can easily be digitized thelnternet is well suited to transmitting digitized voice Because of this the currentPSTN with all its channels is growing obsolete Over the coming years the PSTN is moving to a new IP Internet Protocol architecture Many telephone carriers already have a serious financial commitment to this change With Asterisk telephone calls can be routed over an IP network including the Internet If two users are connected to Asterisk they can communicate over a data network no telephone company i needed Accepting calls from users on the PSTN requir
193. ming convetion is used xx major version yy minor VErsion ZZ sub version POSE Wa Sia REQUIRED SIP IP phone image The phone must have a SIP image available Release 50 and Ss i secured phone amage xx major Version yyemanor version Z2z7 Silo varsom dialplan xml OPTIONAL This dialplan may be downloaded to the phone syncinfo xml OPTIONAL Used for remotely booting the phone Contains an image version and an associated synchronization value In addition to the software files release notes are available for each firmware release TABLE 13 2 Some SIP Image Versions for the 7960 Version File Name Release Notes Ziad P0S30203 bin SipPhoneReleaseNotes POSS A0S 2 00 clor SipPhoneReleaseNotes POS3 04 4 00 bi SipPhoneReleaseNotes 352 4 4 Sys POSS O05 3 00 ovr SipPhoneReleaseNotes 6 0 POSS 06 0 00 21 SipPhoneReleaseNotes Here is an example of what the TFTP log entries can look like after a failure to upgrade to SIP in this example to version 3 0 Wed Nov 06 11 58 51 2002 Sending OSTOXX TXT file toio0 1 1 1 in binary mod Wed Nov 06 11 58 51 2002 Successful Wed Nov 06 1158 51 2002 Sending POS30300 bin file tol0 1 1 1 an binary mod Wed Nov 06 11 58 52 2002 Failed State Error Wed Nov 06 17 59 00 2002 Sending POS30300 bin file tol0 i 1 1 an binary mod Wed Nov 06 11 59 02 2002 Failed State Error Wed Nov 06 11 59 10 2002 Sending POS30300 bin file tol0
194. mode user won t be able to hea v video mod q quiet mode don t play enter leave sounds q dynamically add conference M enable music on hold when the conference has a single calle b run AGI script specified in MEETME_AGI_BACKGROUND Default i conf background agi Zap channels only does not work with non Za channels in the same conference You can configure your system to allow a user to join a conference but not speak with the m option Thet option allows a caller to speak but not listen The example below includes the conference number in the dial plan In this case Callers will not be prompted for a conference number they will be automatically directed to conference 18 The argumentp allows users to exit the conference by pressing on the telephone keypad exten gt 999 1 MeetMe 123 p Here are some additional examples exten gt 998 1 MeetMe 999 mp j caller dials 998 and can only hear audio not spea exten gt 997 1 MeetMe 999 tp j caller dials 997 and can only speak to conf but can t hear i Password protect a meeting by adding a password in meetme conf conf gt ROOMNO PASSWRD For example conf gt 100 54321 Note the MeetMe application must be able to access a Zaptel timer No timer is installed by default if there is no Digium Zaptel hardware interface card installed The return value of this application is always l You can play an announcement to those joining a confe
195. ms You must understand what interfaces are available and how they work to be able to install or configure Asterisk You will never be successful in configuring or maintaining Asterisk unless you understan interfaces and their interaction with Asterisk All calls arrive at or leave an Asterisk server through an interface for example SIP Zaptel or IAX Any incoming or outgoing call is made through an interface Every call is placed or received over an interface on its own distinct channel A channel can be connected to a physical channel like a POTS line or to a logical channel like an IAX or SIP channel It is very important to differentiate the arrival of a call on a channel from what is done with that incoming call When a call arrives at Asterisk over a channel a dial plan determines what is done wit the call For example a call might arrive through aSIP channel The call could be coming from a SIP telephone or from aSIP soft phone running on a computer The dial plan determines if the call should be answered connected to another telephone forwarded or directed to voice mail Asterisk provides various applications for example voice mail These applications are available to the dial plan when processing the incoming call The dial plan and the applications selected for use withi the dial plan determine what Atersisk does Different types of interfaces are associated with different kinds of hardware or protocols For example SIP ch
196. n extension This allows incoming calls to connect to outgoing services This allows incoming callers t make free toll calls Here is an example secure configuration longdistance exten gt _91NXXNXXXXXX 1 Dial Tor g2 BYEXTENSION include gt local local exte gt _9NXXNXXX 1 Dial Tor g2 BYEXTENSION include gt default default exte gt 6123 Dial Tor 1 The amount of logging is controlled by the file logger conf Here is an example debug gt debug console gt debug notice warning error console gt notice warning error messages gt notice warning error messages gt warning error Note that if you turn on full loggin int the messages or debug files the log files will get very large very fast When the log files exceed 2 GB Asterisk will stop running This can take just a few days on busy Asterisk server You should start learning Asterisk with a very simple configuration Getting a simple configuration running with your Asterisk server and your telephones will be a major step towards learning and usin Asterisk This chapter demonstrates a simple configuration for two SIP phones connected to an Asterisk server This example assumes that the phones and the Asterisk server are on the same subnet and that there i no firewall between the phones and the server Four files must be configured for this example sip conf zapata conf extensions conf and voicemail conf Get this simple configuration wor
197. n ztcfg after you have made any changes to zaptel conf to reconfigure the drivers The zttool program displays the status of installed Zaptel boards The drivers for the cards must be loaded withmodprobe as described above for zttoo to work Zftoo will show if the installed Zaptel cards are running correctly If they are not you will need to alter the configuration information inzaptel conf Remember that To install stoo with Mepis use the following commands cd usr src zaptel apt get updat apt get install libnewt de make zttoo Redhat users should install the newt devel package You should now be able to run sbin Zttool This will display the status of each of the running interfaces The options for the command are use instead of etc zaptel conf h show the available argument y verbos e test mode don t use 5 shutdown spans onl Zttool shows the current channels and their states Use the tab key to select between the two buttons when you wish to exit the program The states shown by zttool correspond to the states for the boards It is better to provide Zaptel cards with exclusive access to an IRQ The file proc interrupts lists interrupt assignments You may be able to change interrupt assignments through the BIOS utility for your motherboard Disable any USB drivers like sound drivers or USB drivers that you don t need You must compile and install the zaptel zapata and Asterisk software before config
198. nd URL s Call statistic gathering IAX gathers statistics about network performance including latency and jitter as well as providing end to end latency measurement Call parameter communication Caller ID requested extension requested context etc are all communicated through the call Single socket design IAX s single socket design allows up to 32768 calls to be multiplexed One Asterisk machine functions as an IAX server the other Asterisk device functions as an IAX client In this example an IAX user on the client wishes to make an outbound call through the IAX server The call is sent from the IAX client to the IAX server The call can then be dialed out from the IA server to thelnternet or the PSTN The dial plan of the server manages the call The server must have an appropriate entry in ax conf that accepts and switches the incoming calls This configuration uses thetrusted context in the server dial plan to process the incoming IAX call cpc type frien username cp Ssecrel nysecre context lruste host dynami There are three client types TABLE 09 1 IAX client types type purpose user incoming calls peer outgoing calls friend incoming and outgoing calls The following entry in the extensions conf file of the IAX client switches the call to the AX server at sip iaxserver com The variable EXTEN holds the outgoing number the user dialed The URL sip iaxserver com is resolved to the IP address of th
199. nd arrival of a signal transmitted through a network Letter of Agency See Ballot LEC See Local Exchange Carrier LLP See Local Loop Provider Local Access The connection from a customer to their local office The portion of service between a Customer Premises and a Company designated Point of Presence Local Access Channel The connection between a Customer Premises and a Company Point of Presence Local Access Transport Area By government regulation a geographical area within which a Bell Operating Company is permitted to offer Exchange Telecommunications and ExchangeAccess Services A geographic area established by law and regulation for the provision and administration of telecommunications services Local Exchange Synonym for a local office Local Exchange Carrier A company which furnishes exchange telephone service The local or regional telephone company that owns and operates local exchanges LECs have connections to other LECs or IECs Local Exchange Service The service that provides a customer the ability to place local calls Local Loop The connection from a user to a local office The circuit connecting a customer s premise equipment to the local office Local Loop Provider The company that provides access to a local loop Local Office A place where loops and trunks are terminated Also the central office supplying users in a specified geographical area with telephon
200. nditional goto on current tim Hangup Unconditional hangu HasNewVoicemail Conditionally branches to priority 10 ICES Streaming calls to theInternet LookupBlacklist Look up Caller ID name number from blacklist databas LookupCIDName Look up CallerID Name from local databas acro Macro Implementatio eetMe Simple MeetMe conference bridg eetMeCount MeetMe participant coun illiwatt Generate a Constant 1000Hz tone at Odbm mu law onitor Monitor a channe P3Player Play an MP3 tile or strea usicOnHold Play Music On Hold indefinitel BScat Play an NBS local strea NoCDR Make sure asterisk doesn t save CDR for a certain cal NoOp No operatio ParkAndAnnounce Park and Announc ParkedCall Answer a parked cal Playback Play a fil Playtones Play a tone lis Prefix Prepend leading digit PrivacyManager Require phone number to be entered if no CallerID sen Queue Queue a call for a call queu Random Make a random jump in your dial pla Read Read a variabl Record Record to a fil RemoveQueueMember Dynamically removes queue member ResetCDR Reset CDR dat ResponseTimeout Set maximum timeout awaiting respons Ringing Indicate ringing ton SayDigits Say Digit SayNumber Say Numbe SayUnixTime Say Time in a number of format SendDTMF Sends arbitrary DTMF digit SendImage Send an image fil SendURL Send a URL SetAccount Sets account cod pecCalleriIDs Set Callerrp SetCDRUserFPield Set CDR User Field
201. nections T Carrier systems combine channels to provide greater bandwidth For example in North America a Tl line provides 24 channels for a total bandwidth of 1 544mbps and in Europe an E 1 line provides A 2 048 mbps of bandwidth and 30 channels T Carrier bandwidth is aggregated by combining DSO channels There is a hierarchy of T Carrier circuits Each step provides more bandwidth The hierarchy of combinations for T Carrier circuits are shown in Table 1 It is possible to purchase a fractional T1 line where fewer than 24 channels are provided TABLE 15 1 T Carrier Hierarchy T Carrier Systems North America Japan International channel data rate 64 kbs DSO te one 64 kbs 64 kbs DSO Tl first level 1 544 mbps DS1 1 544 mbps 2 048 mbps E1 24 user channels 24 user channels 30 user channels intermediate level 2r 52 mbps DSE Not Available Not Available 48 Ch second level Geo lZ mips Go Sle maze YG lve 8 448 mbps E2 Cicmetnire ie Yo WGs 120 Cin GZ0Rehe ws ielaalseel ikeneib 44 736 mbps DS3 32 064 mbps 34 368 mbps E3 ETZ Cno 480 Ch 480 Ch fourth level 274 176 Mb s DS4 97 728 Mb s 1440 Ch 139 268 mops E44 4032 Ch A920 Cla fifth level 400 352 mbps 565 148 mbps 565 148 mbps 5760 Ch 7680 Ch 7680 Ch Note 1 The DS designations other than DSO are used in connection with the North American hierarchy only Note 2 Other data rates are in use
202. ng on the same sub net behind a SIP enabled firewall you should turnNAT Detection to OFF Settings SIP Stack to avoid possible conflicts If you are installing snom 200 telephones behind a NAT router at a remote location you can activate Automatic or STUN settings One of the choices within the configuration Web pages from the telephone Web server will show you the manual for the telepohne Two documents are additionally available from the Snom Web site Snom 200 User Manual Operations Manual for End Users Provides instructions for web interface and phone operations Snom 200 Administrators Manual A technical reference manual for configuration and setup of snom 200 VoIP Phones You can download these manuals from http www snom com snom200 en php Note the links for the manuals are at the bottom of this Web page If you want to turn Administrator Mode ON or OFF to restrict the menu options available to users the default password is 0000 four zeros You can access all the firmware versions for snom phones from http www snom com support dl _en ph If you should run into a technical issue you should immediately open a trouble ticket on the ABP website athttp www abptech com mainpages support supportcase html ABP Tech Support uses this database to respond to issues and we track every open ticket The most common business connection to the PSTN Public Switched Telephone Network
203. nload the firmware version named in this file This download can be aSkinny image or a SIP image Loading a new image changes the configuration of the phone betweenSIP and Skinny Skinny is the proprietary Cisco Call Manager protocol If your phone is configured for Skinny you will need to convert it toSIP for use with Asterisk Note that you can always convert a phone back to Skinny If you have an older phone or a phone configured for Skinny instead of SIP you may not be able to load one of the newerSIP images Older phones must be upgraded in turn with each of the SIP releases two two point two three four five and six You are more likely to be successful in converting a 7960 fromSkinny to SIP if you upgrade through each of the available versions ofSIP starting with version 2 0 That is change the phone toSIP version 2 0 then 2 2 Then upgrade the phone to SIP version three then four and then five and six Note that a phone that has been upgraded to version five cannot be downgraded The following steps show how to configure a 7960 telephone for SIP There is a following section for each version ofSIP In general you will need to perform each of these seven steps for each SIP release 1 Download the files you will need from the Cisco Web Site Copy them to your TFTP data directory In the Mepis distribution theTFTP data directory is boot 2 Rename and modify the configuration files held in the TFTP dir
204. ntense debug sp pri no debug span A quit reload remove extension remove ignorepat remove indication restart gracefully restart now restart when convenien send text set verbose A show agents A show agi A show applications A show application A show audio codecs A show channel A show channels A show codecs A show codec A show conferences A show dialplan A show image codecs A show image formats show indications show keys gt gt gt D gt show locals A show manager command A a show manager connect A show modules A show parkedcalls A Enables PRI debugging on a span Enables REALLY INTENSE PRI debugging Disables PRI debugging on a span Exit Asterisk Reload configuration Remove a specified extension Remove ignore pattern from context Remove the given indication from the country Restart Asterisk gracefully Restart Asterisk immediately Restart Asterisk at empty call volume Send text to the remote device Set level of verboseness Show status of agents Show AGI commands or specific help Shows registered applications Describe a specific application Shows audio codecs Eag Display information on a specific channel fe Display information on channels Shows codecs ag Shows a specific codec Pa Show status of conferences Show dialplan Shows image codecs Displays image formats Show a list of all country indications Di
205. o communicating applications The proxy supports reservations H 323 traffic routing and Network Address Translation NAT The following figure shows a sequence diagram for the call flows between two IP addresses This example assumes that the two endpoints have already resolved each other s address T I l I I I I I I l l I I I l I l I I I I I I I l l I I I I I I I I I I I I I I Figure 16 5 H 323 In the example endpoint one sends a setup message to endpoint B This message is sent to TCP port 1720 Endpoint B replies with an alerting message that includes a port number This message initiates H 245 negotiations The H 245 negotiations setup the codec types and port numbers for the RTP streams The Codec types are specified by G 729 and G 723 1 Any other capabilities the endpoints share are negotiated Logical channels for the UDP streams are negotiated opened and acknowledged The two endpoints can now send and receive the media stream containing the voice traffic Real Time Control Protocol can transmit information about the RTP stream to the two endpoints during the session This call flow shows an example of H 323 version one H 323 version two allow H 245 to be negotiated through a tunnel in the H 225 setup message This is called fast start A fast start reduces the number of messages needed to initiate a call SIP is described in RFC 2543 SIP is an application layer con
206. o documents available from Cisco can help you configure your phone the Cisco SIP IP Phone Administrator s Guide and the document How to Convert a Cisco 7960 Call Manager Phone toSIP and Reverse the Process You should have both these documents available before proceeding This chapter does not include all the information found in these two documents For example consult theAdministrator s Guide for instructions on physical installation connecting to the network or accessing a phone remotely over th network The following sections assume that you are familiar with the 7960 controls including th scroll key and soft keys Figure One shows the 7960 controls nS a OAs 392 TLI SF S3Z Tb1S F Sar current optiane Figure 13 1 7960 Controls The 7960 can draw power from an external 48 volt transformer The 7960 can draw power from the ethernet cable Power over ethernet requires a powered switch or a power patch panel Push the button on the side of the telephone to adjust the foot stand to the desired height he Cisco 7960 provides up to six different lines An inbound call flashes a line icon on the LCD screen for the line called Pressing a button for line button before dialing causes the outboundSIP call to appear to originate from that line Each line has a message waiting indicator a flashing envelope Overview of the 7960 Initialization Process The 7960 connects to an ethernet with a CAT5 cable It
207. office telephones systems combine proprietary hardware and software The resulting products have been either low cost and low function or functional but expensive to purchase maintain and change The developer of proprietary products has no interest in giving customers the ability t enhance or maintain them Why should he The proprietary model gives the traditional telephon supplier the ability to charge customers to use the products charge to fix them and charge again whe they need enhancement The proprietary model gets even better for the telephone supplier and worse for the customers as customers become tied to the vendor s specific methods and capabilities The cost of switching away from the supplier becomes very large creating formidable barriers to change That s why the open source model of software development is exploding In the same way shared knowledge propels the whole of society forward open technology development is showing that it ca drive innovation for an entire industry Open source returns control to the user Users can see the cod that makes the product work change it and learn from it Shared problems are more easily found an fixed without dependence on a single vendor s priorities If customers don t like how one vendor i serving them they can choose another without major switching costs Now open source development has come to telephony in the form of Asterisk the open source telephony platform A full feat
208. omeone in the Asterisk community adds the feature you want you won t be charge extra for it Since the product is open source you can add you own features Asterisk has facilities proprietary telephone systems cannot provide For example Asterisk has a scripting system This scripting system makes it easy to make Asterisk do amazing things For example you can write a script to have Asterisk call you in the morning to wake you up You can write a script t have Asterisk read a weather or traffic report The following chapters describe how to design install configure build and maintain an Asterisk system for your enterprise At the time of writing Asterisk provides the following features New features are regularly added e Telephony Services o Voicemail System A a Password Protected Separate Away and Unavailable Messages a Default or Custom Messages a Multiple Mail Folders a Web Interface for Voicemail Checking a E mail notification of Voicemail a Voicemail Forwarding a Visual Message Waiting Indicator a Message Waiting Stutter Dialtone o Auto Attendant o Interactive Voice Response o Overhead Paging o Flexible Extension Logic a Multiple Line Extensions a Multi Layered Access Control a Direct Inward System Access o Directory Listing o Conference Bridging a Unlimited Conference Rooms a Access Contro Call Queuing ADSI Menu System a Support for Advanced Telephony Features a PBX Driven Visual Menu Systems a Vis
209. on four that you deleted earlier Reboot the phone When the phone has started the bottom of the LCD display should show unprovisioned and 1234567Sip should appear in the upper right hand corner Note that you can access the phone with telnet This will of course require the password The version 5 SIP image is signed Because it is signed it is not possible to downgrade to earlier SIP versions after you have upgraded a 7960 phone to version five The download file for version five is a ZIP file not a configuration file Unzip the files in the zip file toa convenient location Read the text files containing the release notes Copy the POS images to th TFTP data directory Note an additional file is present in this release POS3 05 3 00 sbin Edit OSX79XX txt to contain POS30503 Edit the file SIPDefault cnf to contain the image name POS3 05 3 00 Edit the SIPDefault cnf file to name this image Reset the telephone TABLE 13 7 OSEH OL a DE SEDE Reile o GUE SiPs6iPmacacddress cn RINGLIST DAT ringerl pcm ringer2 pem A P0S3 05 3 00 bin PUSS Uo or OOmsb in After the reset has completed check the settings of the phone to make sure the firmware image has been updated You should upgrade any 7 7960 phones to version six The download file for version six is a ZIP file not a configuration file Copy the POS3 06 images to the TFTP data directory Edit OSX79XxX txt to contain PO0S30600 Edit SIPDefaul
210. on 3 2 20020903 Red Hat Linux 8 0 3 2 7 1 Tue Jan 28 11 01 02 CST 200 In this example the kernel source of 2 4 28 version in usr src Ls id usr sre linux should be lrwxrwxrwx 1 root root 12 Feb 10 2003 usr src linux gt linux 2 4 28 drwxr xr x 17 root root 4096 Jan 27 2003 usr src linux 2 4 1 Make sure that the config file for the running kernel is available The config file is often in the usr src linux directory You may also find it in the boot directory The version number should be the same as the version number of the kernel sources ls boot config boot config 2 4 2 In the kernel source directory create a kernel config file cd usr src linux make menuconfig Load the current kernel config file and exit saving a new config Execute this make command to create the modversion h kernel header file Zaptel requires this file be present make dep The zaptel sources should compile now If you find a bug with Asterisk you should report it by going to bugs digium com This is a great service to the Asterisk community If you have installed a custom Debian kernel the kernel Makefile in usr src linux Makefile may not have the correctEXTRAVERSION variable If matching the Kernel as described in the section directly above doesn t work examine the Makefile Make sure the version information in the Makefile matches the information returned by the comman uname If needed edit the Makef
211. one Here is a fragment from a configuration file for a Cisco 7960 that assigns extension 4035 to line one linel_authname 4035 Line 1 Registration Passwor linel_password cisco Every extension identifier must be unique across all telephones Two different phones or two different lines on a single phone should never have the same extension identifier Every telephone extension must be configured in etc asterisk sip conf Here is fragment from sip conf that configures extension 4035 4035 type friend This device takes and makes call username 403 secret cisc context from si callerid AUser lt 4155551212 gt qualify 100 host dynamic This host is not on the same IP addr every tim canreinvite n mailbox 4035 Activate the message waiting light for waiting message defaultipl92 160 0 12 Any extension must be configured in etc asterisk extensions conf to associate an extension identifier with one or more of theSIP device identities in sip conf Here is a fragment from extensions conf that sends incoming calls to extension 403 from sip If the number dialed by the calling party was 4035 then Dial the user 4035 via the SIP channel driver Let the number ving for 20 seconds and if no answer proceed to priority 2 If the number gives a busy result then jump to priority 102 exten gt 4035 1 Dial SIP 4035 20 A simple configuration using two SIP phones is shown later in this chapter
212. one phone to another Over longer distances the signals nee amplification Unfortunately amplification makes the noise louder as it makes the signal louder Eac additional amplifier adds more noise and degrades the signal further as it traveled over longer distances More recent technology allows analog signals to be digitized The original analog waveform can be represented as a stream of numbers Digitization relies on the Nyquist theorem A high quality digita representation of an analog wave form can be created by sampling the waveform twice as fast as th highest frequency found in the analog waveform The most common method of digitizing analog signals is Pulse Code Modulation With PCM the analog signal is first filtered for example to remove any frequencies above 4kHz or below 100Hz Thi Signal is then sampled 8 000 times per second twice the highest frequency The samples create a digital data stream Each data element in the data stream represents the amplitude of the original analog waveform at the moment the sample was taken PCM uses an eight bit coding scheme coupled with a logarithmic compression algorithm Sampling eight bit values at 8 000 times a second produces a 64 kbs data stream A pair of wires running from a central office to a telephone is called a local loop The local loop connects the telephone to a Switch in the central office The communications link between one central office and another is called a
213. onnected to thelnternet You can connect an IP phone directly to the Internet You can connect any standard analog phone or fax machine to the Internet with an inexpensive VoIP adaptor If your Asterisk system is connected to the Internet any VoIP enabled telephone that is connected to thelnternet can be allowed to connect to your Asterisk system You can easily call any other VoIP phone serviced by your Asterisk system no matter where that phone is You can easily assure that th connections are secure and that unauthorized users are excluded Any phone controlled by your Asterisk system can call any other VoIP or analog phone controlled by your Asterisk system It doesn t matter where a network connected phone is located For example you can have an Asterisk phone system in your office in New York and an office in Shanghai Your Asterisk system in Ne York is connected to thelnternet and your Shanghai office is connected to the Internet A phone in Shanghai connects to your New York Asterisk system over thelnternet The phone in your Shanghai office now works exactly like any phone in your New York office When you dial the number for phone in the Shanghai office from your New York phone the phone rings in Shanghai Asterisk VOIP running on a PC VOIP Adaptor Your Network The Internet IP Phone in Shanghai With a little bit of the right equipment you can install a phone at your home office and plug it into the Internet Your of
214. or message body You will get back an e mail containing information on subscribing and unsubscribe via e mail Al administrative requests should be directed to mailman owner lists digium com To modify your subscription to an Asterisk mailing list click on the appropriate link above enter your e mail address and click Edit Options Follow the instructions listed on the website or if you nee further assistance e mailmailman owner lists digium com To browse the Asterisk mailing list archives go to http lists digium com mailman listinfo To browse the old lt asterisk marko net gt mailing list archives go to http www marko net asterisk archives You can search the archives with the Google link found at http www digium com index php menu mailing list A wealth of information about Asterisk is available from the Asterisk mailing list found at hitps 1lists digqium com There is an Asterisk IRC channel available on Server irc freenode net A Port 6667 A Channel asterisk You can easily login to the freenode chat line at http www digium com index php menu live chat The VOIP forum has a large archive of useful technical information You can access the forum at http www voip forum com You can easily search the VOIP forum at http search voip forum com You can and should contribute to Asterisk Developers can contribute to the Asterisk code base
215. or Internet is a Tl line or in areas outside the US an El line A T1 line is often called a DS 1 The following sections describe T1 and other T type lines This chapter is not a complete reference to T Carrier or ISDN For more in depth information consult one of the excellent references listed in the appendix A T1 line provides a point to point connection For example you can use a Tl line to connect your office to the telephone company central office switch for dial telephone service You can use a Tl lin to connect your local computer network to an ISP to establish a connection to theInternet You the user determine the end points You the user determine what the Tl line is used for voice or data o both T Carrier is a series of digital communications systems used by telephone companies around the world T Carrier is a digital protocol developed by AT amp T by 1957 and first implemented in the early 1960 s TheT Carrier was developed to support the transmission of digitized voice T Carrier provides telephone companies the technology to move voice or data digitally over what had been before an analog system T Carrier uses two pairs of wire It is full duplex that is data can be sent and received at the same time Signals are digitized and then sent over the T1 connection Voice is sampled 8 000 times a second and converted into eight bit words An frame is built that contains a word for each of the 24 channels A frame
216. or the Asterisk server a subnet mask and the addresses of twoDNS servers Use the nterface tabs to set the adaptors and theStatus tab to start and stop the interfaces Detailed Linux network administration is beyond the scope of this book You may wish to configure your Linux server to periodically set the system clock by accessing an Internet time server This is a good idea Mepis by default enables network time resolution The Mepis directory etc cron daily contains a file named ntodate The file permissions must be rwxrx rx In this file the command rdate sets the system clock You can can use a time server of your choice as long as you are within the server s usage policies Replace your server com shown below with the IP address of a time server A list of public time servers is available athtto www eecis udel edu mills ntp clock2a htm bin s rdate ssome server com A sound card is not required for Asterisk operation The copy of the mpg audio software shipped with some Linux distributions including Red Hat will not work with Asterisk If you are going to use musi on hold you will need mpg123 The mpg software on the Mepis CD works If you need mpg123 can be found at http www mpg123 de mpg123 mog123 0 59r tar gz Alternatively from the command prompt you can type cd usr sre A wget http www mpg123 de mpg123 mpg123 0 59r tar gz Extract the archive and compile it tar zxvf mpgl23 0 59r tar
217. original unchanged file SIPmacaddress cnf to a file named for the individual phone for example SIP0007505A3E8B cnf Change the SIP image named at the top of this file to POS30202 Reboot the phone This should cause the 2 2SIP image to download into the flash memory of the 7960 At the phone check the settings Look under Status Settings Firmware The application load ID should now be POS30202 To upgrade from release 2 1 or earlier to release 3 0 requires upgrading to release 2 2 first To move from version two to version 2 2 to version 3 02 edit the file OS79XX txt to contain P0S30302 Copy the original unchanged file SIPmacaddress cnf to SIPDefault cnf Edit this file and change the image name to match the sip release as shown belo Image Version image_version POS3 03 2 0 Edit SIPDefault cnf and remove the lines for versions four and five Copy the original unchanged file SIPmacaddress cnf to a file named for the individual phone for example SIP0007505A3E8B cnf Copy the SIP image file POS3 02 00 bin to the TFTP directory Make sure all the files have read permission These files should be in the TFTP data directory TABLE 13 5 OS79Xx TXT SiIppetaule cnt SIPSIPmacaddress cnf RINGLIST DAT ringerl pcm ringer2 pcm POSS O3 2 00 oim Boot the phone When loading a new SIP image the boot process is longer The new SIP image has to be copied to the phone s flash memory It may take as much as
218. ost dynamic This host is not on the same IP addr every tim canreinvite n mailbox 4009 Activate the message waiting light for message defaultipl92 168 0 12 The SIP call comes in over a SIP channel The entry in sip conf names a context in the dial plan The call is processed by the instructions in the named context in the dial plan Here is the complete extensions conf file for your simple configuration This dial plan has two contexts default and from Sip The context from sip in the dial plan supports the two SIP telephones at extensions 4009 and 4035 There are two sets of entries on set for each extension general static yes These two lines prevent the command line interfac writeprotect yes from overwriting the config file Leave them her default exte gt 4035 1 VoicemailMain2 from sip If the number dialed by the calling party w 4035 then Dial the user 4035 via the SIP channel driver Let the number ving for 20 seconds and if no answer proceed to priority 2 If the number gives a busy result then jump to priority 102 exten gt 4035 1 Dial SIP 4035 20 Priority 2 send the caller to voicemail and gives th u navailable message for user 4035 as recorded previously The only way ou z of voicemail in this instance is to hang up so we have reache the end of our priority list exten gt 4035 2 Voicemail2 u4035 If the Dialed number in priority 1 above results in busy code
219. ovides four separate connections or spans Each span can provide for T1 or E1 signalling The TE405P can also be quad E1 or T1 selectable per card or per port You can do both signaling formats in a single card Thi card improves performance and scalability with a bus mastering design The TE405P has beenFCC CE and UL approved The TE405P supports a 5 0v PCI slot only The TE410P supports a 3 3v PCI slot only typically available on newer motherboards and in 64 bit PCI bus architectures These cards are not interchangeable between 3 3v and 5 0v PCI slots Customers ordering a card not matching their availabl PCI slots will be held accountable for all freight charges and incur a 30 handling fee to rectify the situation If you are unsure about the PCI slots on your motherboard please click the following link We do not recommend use of the TE405P in dual processor Athlon systems If you are not using T1 or E1 connections if you are using FXO or FXS adaptors you don t need span definitions WithFXO or FSX adaptors channels appear in the order the drivers are loaded For example if you have a single port FXO card and a USB single port FXS interface you would load the FXO driver and then the USB driver TheFXO driver would appear as channel one and the USB FXS would be channel two FXO and FXS signalling is the reverse of the type of signalling for the interface itself FXS interfaces are signalled withFXO FXO interfaces are signalled with
220. pacity digital service provided on terrestrial digital facilities capable of transmitting 1 544 Mbs The interface to the customer can be either a Tl carrier or a higher order multiplexed facility such as those used to provide access from fiber optic and radio systems AT amp T offers services in addition to point to point data service For example four transfer arrangements can be purchased 1 The customer can change the terminating location of a T1 link with AT amp T assistance 2 M24 Multiplexing allows the user to subscribe to any of the 24 T1 channels individually to switched and non switched services offered by A amp T 3 M44 Multiplexing combines 2 T1 lines each carrying up to 22 channels onto one T1 line using Bit Compression Multiplexing BCM 4 Customer Controlled Reconfiguration CCR allows the customer to dynamically allocate circuits without A amp T assistance AT amp T states that their performance objective is 95 Error Free Seconds EFS on a daily basis and A 99 7 availability on a yearly basis Be sure to check what features your service provider that might be helpful in your application In 1917 AT amp T deployed the first carrier system called the A system Seven A systems with four voice channels over pair of wires were ever deployed Over time newer analog frequency division multiplex systems named B C and D were developed Few of these saw commercial service The L syste was very succ
221. port resources and including updates If you need assistance installing or configuring Mepis Linux commercial paid support is available Please contact Mepis athtto Wwww mepis com Tell them Signate sent you Boot from the Mepis CD after successfully booting from the CD you will see the prompt boot Don t press any keys Just wait and mepis will continue the boot process Wait until you see the mepis login screen Mepis will run linux entirely from the CD After the boot process is complete you wil see a login titled Welcome to MEPIS linux Logon as root with the password root Mepis will start KDE and initialize itself This will take a few minutes Booting from the CD is slower than booting from a hard drive Next you will see the Mepis Linux desktop Click on the icon labeled MEPIS Installation Center Click on Install MEPIS on Hard Drive Read the notice and then click on Next Look for choice 1c and select Auto install using entire disk More complex installations are beyond the scope of this book Click on Next and answer Yes to the question OK to format and use the entire disk dev hda for Mepis This will partition and format the hard drive Mepis is then copied to the hard drive For the next dialog select Next to install lilo in the system boot disk master boot record On the next dialog select Yes and then on the next OK In the next dialog select a password for the default account username and for the Root ac
222. provide dynamic impedance This is very helpful for eliminating echo at the source The channel bank and the Asterisk server talk T1 to each other You supply a T1 connection between the channel bank and the Asterisk server That is you put a T1 card in the Asterisk box and then connect it to the channel bank usually with a T1 crossover cable Please remember to use a real T1 cabl and not a cat 5 cable The channel bank can then break out the individual channels from the T1 card into separate ports For example take an installation with a T1 line from a phone company and a channel bank A Digium T1 card in the Asterisk server provide for a connection to the channel bank A crossover cable connec the two devices The channel bank ports are set up for any combination of fxs or fxo The channel ban expects T1 signalling for example B8ZS ESF with wink start or some other T1 protocol With the availability of quad span Digium cards there is less occasion to use a channel bank For example with six open slots you could run six quad span Wildcard TDM400 cards This would provide 24 channels in any combination ofFXO or FXS channels However with a Digium quad span T1 card you could run 96 channels with a channel bank If you need to access a large number of analo lines a channel bank may be just what you need First install any cards into the computer Be sure to be well grounded preferably with a wrist strap before installing any cards Not
223. r must have an extension The user s extension is specified in extensions conf The extensions are specified within a context Here extension 1265 is included in the main context main exten gt 1265 1 Dial ZAP 1 15 Each user mailbox is configured in voicemail conf A user extension must be included within a context invoicemail conf In this example extension 1265 is included in the voicemail context named main Note that the context names must be the same in this examplemain in extensions conf and voice mail conf for voicemail to work correctly main 4008 gt 2624 Joe User You must create an empty voicemail box for each user Edit the file voicemail cnf to create a new mailbox Entries for users appearing in voicemail conf have the syntax r password the numeric password for accessing the mailbox for example 1234 name a user name for example Bill email if email is specified a copy of the message will be sent to this address via email Not that this means email must be configured properly for the Linux server runniinstance of Asterisk pager_email a second e mail address to which a pager notification may be forwarded options not yet i Make sure you do not have any spaces around the extension and password Here is an example voice mail configuration with one voicemail box specified at the end of the example Voicemail Configuration general Default formats for writingVoicemail forma
224. ransmitting data packets typically over an IP network Voicemail A system that receives stores plays and manages voice messages voicemail Box The storage area for voice messages WATS See Wide Area Telephone Service Wide Area Telephone Service A special tariff for a specified calling area Wide Area Network A network over several locations that are widely separated Wire Center The service area where a Customer Premises would normally obtain exchange service or dial tone from anILEC Wireless Transmission without a wire typically by radio or light waves Wireless Number Portability The service allowing a customer to retain their phone number when moving to a new provider WNP See Wireless Number Portability Working Telephone Number A telephone number with established operational telephone service WTN See Working Telephone Number TABLE checklist 1 Site Installation Information Company Name Site Street Address Ciiey Scare Zip Site Contact Name Telephone Number E Mail Address Cell Number Pager Number TABLE checklist 2 Pre Installation Requirement Network diagram displaying all devices Electrical power outlets available Outlets close enough to equipment to meet local codes Air conditioning required Air conditioning capacity Air conditioning outlet close enough to equipment Lan connections next to system location 110 or 66 blocks clearly marked C
225. re calls can be placed to a client telephone If Asterisk is already running the r command will attach to that running instance Any other commands you may wish to use must be included For example if you want to attach to a running Asterisk server with verbose output from the command prompt use the comman asterisk vvvv To end the session without stopping Asterisk use the exit command To reattach to a running Asterisk server from a command prompt use the command usr sbin asterisk Sending a SIGINT typically by typing control c will stop the Asterisk console If Asterisk is not running as a background process this will stop Asterisk If you start Asterisk as a background process either froma Startup script or from the command prompt asterisk with the commandasterisk Asterisk when it is running as a background process you can reattach to After you have reattached to the exit f command will exit the console without stopping Asterisk The following arguments are available when starting Asterisk with the Asterisk command c Enables console mode If console mode is enabled Asterisk will provide a command line that can issue commands and view the state o the system Implies f as wel C Executes Asterisk with a different configuration file d Enables extra debugging across all modules f Prevents Asterisk from daemonizing into the background g Forces Asterisk to dump core
226. re routed to the support center in Denver The calls are sent over thelnternet so there is no long distance charge to the company The user has called a loca number and has no long distance charge This is called toll bypass With Asterisk you can make calls through the telephone company or make calls over the Internet With the appropriate hardware Asterisk supports telephony over thePSTN without any Internet connection It is much cheaper to send telephone calls over the Internet than through the telephone companies Asterisk can pay for itself with the money you save on your phone bill With Asterisk PBX s and Interactive Voice Response IVR applications are rapidly created and deployed The powerful command line interface and feature rich text configuration files support rapi configuration and real time diagnostics Web servers provide easy deployment of dynamic content for example movie listings or weather reports Asterisk can deploy dynamic content over the telephone with the same ease For example Asterisk can display contact or meeting information on the LCD panel of an IP telephone Asterisk s unusually flexible dial plan allows seamless integration of IVR and PBX functionality Asterisks Features are easily implemented using nothing more than extension logic Asterisk supports a wide range of protocols for handling and transmitting voice over traditional telephony interfaces Asterisk supports US and European standard signalling
227. redirected to the sales department or 201 to be redirected to the Support department By directin incoming calls to the Main context incoming callers would be prevented from pressing 9 and reachin an outside line The Interactive Voice Response IVR facilities of Asterisk can provide voice prompts for each of the contexts An outside caller reaching the Main context could be presented with a message saying Press 100 for sales or 201 for support ____Context Dial Out ___Extension Description 9 Outside Line AU of im Figure 06 4 Contexts Linking _Context Main Extension Description lt 100 Sales Extensions can be of any length and can be included in any other context In the example above the extension 201 has been reused in two different contexts the Main context and the Support context Including the Sales context in the Main context would allow callers to select the extension of someon in Sales from the main menu This is shown below __Context Dial Out__ POET 100 Sales jo invalid ___Context Support_ __Extension Description 202 Miriam Figure 06 5 Contexts Including A context can include the contents of another context with an include statement Here is an example trunklocal exten gt 4035 1 Dial SIP CAB 20 include gt trunktollfree There is no implied order for the extensions in a context Here is an example from a Sip conf configuration file with two extens
228. rence by adding the following to the dial command A x play an announcement to the called party using x as file Further information is available from the sample configuration files and from http www voipinfo org wiki Asterisk cmdtMeetMe Facsimile requires a lossless codec like G 711 ULAW Fax will not work with lossy codecs like GSM Compression removes portions of the audio spectrum that people can t hear but that fax transmissio relies upon Asterisk can in the dial plan accept an incoming fax When a call is answered with the answer command Asterisk will listen for beeping You will need to add additional third party software to process the incoming fax transmission SoftFax software is available at ftp ftp opencall org pub spandsp The instructions for SoftFax are available athttp www opencall org instructions html Hylafax software may be of use Scott Laird has posted an excellent example to the Asterisk mailing list This can be found at http lists digium com pipermail asterisk users 2004 March 041408 html and is shown here This example will receive a fax and identify it with a unique ID In case anyone s interested I spent a bit of time on incoming faxes yesterday prototyping a DID FAX type setup Here are a few snippets in case anyone s interested macro faxreceive exte gt s 1 SetVar FAXFILE var spool asterisk fax UNIQUEID tif exten gt s 2 DBGet EMAILADD
229. ret secret host dynamic slave trunk ye notransfer ye slave type peer auth plaintext context outbound nuphone secret secret host dynamic trunk yes notra in extensions conf assigned dids uncomment a dial mechanism first one goes to specific extensio other one goes to dial parameter s exten gt 7046446999 1 Dial IAX2 master slave EXTEN jexten gt 7046446999 1 Dial IAX2 master slave machine slave iax conf regist gt slave secret iax gwl company net master type peer hiax gwl company net secret secre context outboun trunk ye canreinvite n master type user secret secret context acontext trunk yes canrein This example in iax conf forwards calls to another Asterisk server The user and key must be specified in the iax conf file of the called machine A context namedservers must appear at the calling machine inextensions conf iaxprovider switch gt IAX2 user key server context Asterisk voicemail provides many features including Password protection Separate away and unavailable greetings Default or custom greetings Multiple mail folders Web interface for checking of voicemail E mail notification of voicemail with audio file attachment Voicemail forwarding Visual message waiting indicator Message waiting stutter dialtone Optionally play the CID of the caller heard before the voicemail Optionally reach an operator after leaving a voicemail Optiona
230. rier specifies a physical set of wires repeaters connectors plugs jacks etc In terms of the OSI standard network model briefly described in the appendix T Carrier is the standard for layers one and two T Carrier specifies the physical connection and the carrier signal sent over that physical connection Data is carried on top of the T Carrier Data is carried on a T Carrier channel at a digital data rate that is calledDigital Signal Level Zero or DSO DSO is described below T Carrier describes the physical layer interface to a provider network A T Carrier circuit is typically provided as two pairs of wire These are bare wires that run directly from the central office to the customer premises without any conditioning The maximum T Carrier signal distance is 3000 wire feet measured from the egress at the cnetral office Repeaters are used to extend aT Carrier signal further than 3000 wire feet The first repeater is placed within 3000 wire feet of the CO Successive repeaters are placed every 5000 wire feet The las repeater is installed within 3000 wire feet of the customer s termination point 1 Conditioning devices like bridge taps and load coils are used on analog telephone lines to help maintain or improve signal quality Splices which are common tend to degrade signal quality 3000 Ft 5000 Ft 3000 Ft Central Customer Office Premises Figure 15 1 T1 Repeaters Once the physical
231. riginateSIP requests to start and stop sessions and to send and receive data A User Agent can be a hardware phone a software phone running on a PC or a gateway to another network like thePSTN Every SIP User Agent includes a User Agent Client and a User Agent Server A User Agent Client UAC is the component of the User Agent that initiates requests The User Agent server UAS is th component of the User Agent that responds to requests Both are typically used during aSIP session Servers are intermediaries They help User Agents establish and manage a SIP session There are three types ofSIP server SIP proxies forward SIP requests Redirect servers get a request from a user agent they return an indication of where the request should be resent to Registrar servers update location o other database information Location servers maintain databases of information like URLs IP addresses scripts features and preferences User agents usually interact with Location Servers through a SIP proxy SIP Uniform Resource Locators URLS provide addressing similar to e mail addressing A SIP URL can have various forms and can include a telephone number for example sip someone somewhere com sip 1 415 555 1212 somewhere com user phone sip 1 415 555 1212 somewhere com user phone phone context VNET aut Io a s I SRV quay I gt l SRVrecod Is l l SIP request l
232. risk FLASH Call Forwarding Implemented in Asterisk 72 and 73 optionall implemented in the phon Call Pickup Implemented in Asterisk 8 Call Waiting Indication Implemented in Asterisk disable with 7 Call Number Delivery Blocking Implemented in Asterisk 67 Do not disturb DND Normally implemented by your phone also implemented in Asterisk 78 and 79 Message waiting MWI Implemented in Asterisk but must be support o the phon Call Deflection CD redirect without answering Implemented by chan_cap CLIP amp CLIR display caller ID amp hide my caller ID Implemented by chan_cap CID amp DNID Implemented by chan_capi HOLD amp RETRIEVE Hold a call using ISDN not the PBX Implemented by chan_cap Early B3 Connects always success never Implemented by chan_cap DID for Point to Point mode Implemented by chan_cap ECT explicit call transfer Preserve the orginial CID Implemented b chan_cap SIP is a description protocol similar to HTTP and SMTP that allows two systems to initiate and control a media stream between endpoints SIP supports authentication caller ID and media stream control SIP is rapidly gaining acceptance for VoIP There are many commercial SIP providers for example Voicepulse Here is an overview the details are covered at greater length below SIP channels are configured in sip conf SIP calls like any other call are managed by the dial plan found in extensions cont A
233. risk sound Record a temp GSM file exten gt 100 1 Wait 2 exten gt 100 2 Record tmp asterisk recording gsm exten gt 100 3 Wait 2 exten gt 100 4 Playback tmp asterisk recording exten gt 100 5 Wait 2 exten gt 100 6 Hangup The following example shows how to create an interactive menu for incoming calls main lower case letter after an extension is reached pressing the letter starts voicemai exten gt 0o 1 voicemailmain exten gt 2800 1 Dial ZAP RECEPTIONIST 25 r exten gt 2800 2 DigitTimeout 5 exten gt 2800 3 ResponseTimeout 12 exten gt 2800 4 Background heartland exten gt i 1 Playback pbx invalid exten gt i 2 Goto 2800 1 Time Out exte gt t 1 Goto 2800 1 exten gt 0 1 Macro zapdial RECEPTIONIST 20 exten gt 1 1 Macro zapdial 2800 20 exten gt 7 1 Directory inside Asterisk can route a call based on the caller ID of the incoming call exten gt 100 6505551212 1 Congestion exten gt 100 1 Dial Zap 1 20 exten gt 100 2 Voicemail ul100 exten gt 100 102 Voicemail b100 If the incoming call is from 650 555 1212 a busy signal is played Other calls are forwarded to the extension If there is no answer the call is forwarded to voicemail An entry like this in extensions conf will provide callers with music on hold exten gt 2091 1 Answer exten gt 2091 2 Wait 1 exten gt 2091 3 MusicOnHold default Note that musiconhold conf mu
234. risk server to your local area network You can connect IP telephones to this network You can use IP adaptors for example the Cisco ATA 188 to connect analog phones to the local area network IP telephones and IP adaptors require power Some IP phones and adaptors can draw their power from a remote source over the ethernet cable Powering the phones over the ethernet makes it easier t provide backup power You can provide a single UPS for the switch instead of trying to provide a UP for each phone The UPS will keep the switch and the IP phones running during any power outage It will be more expensive and more difficult to maintain backup power for individual phones SIP phones are available from a number of vendors including Cisco Snom Polycom IP Dialog ATelNet Swiss Voice and Grandstream SIP adaptors for analog phones are available from several vendors including Cisco Motorola and Sipura A number of software phones are available for use with Asterisk including XTENSIP phone http www xten com ESTAR SIP phone http www estara com SJPhoneSIP phone http www sjlabs com eye SIP phone http www eyepmedia com GnoPhone LinuxSIP phone http www gnophone com Asterisk IAX Phone by Steven Sokol http www sokol associates com Asterisk IAC Phone http iaxclient sourceforge net iaxcomm There must be a sound card on the machine where the soft phone runs If you are using a T1 connection to the PST
235. rminating point of a call Calling Station The station at which a call is originates Caller ID The transmission of the telephone number of the calling party Calling Card A credit card accepted by a telecommunications carrier Typically used for charging telephone calls when the user is away from their home or office Carrier Identification Code A three digit number used with Group B and D feature groups to access a IECs switched services from a local exchange Casual Customer Any person that dials a CIC code without necessarily being presubscribed to the carrier CAT5 Category 5 An ethernet standard describing the physical characteristics of a cable and connector Centrex Services typically provided to a user by a PBX that are instead hosted at a central office Channel or Circuit A communications path between two or more points Channel Associated Signaling CAS See Robbed Bit Signaling Channel Termination The point at which the Company s channel originates terminates or drops for the insertion or removal of aCustomer s signal CIC See Carrier Identification Code Class of Service The limits on what numbers can or cannot be called for example local statewide international etc CDMA Code Division Multiple Access an American standard for encoding cellular telephone calls CLEC See Competitive Local Exchange Carrier Collect A call paid for by the party receiving the c
236. rx for our dyslexic friends Si cs Receive audio COR on an SF interface l way sf_tx Transmit audio PTT on an SF interface l way sf_txrx Receive audio COR AND Transmit audio PTT on an SF interfac 2 way sf_rxtx same as sf_txrx for our dyslexic friends signalling fxo_l A variety of timing parameters can b specified as wel Including prewink Pre wink tim preflash Pre flash tim wink Wink tim flash Flash tim start Start cim A rxwink Receiver wink tim rxflash Receiver flashtim debounce Debounce timin rxwink 300 Atlas seems to use long 250ms wink Whether or not to use caller I usecallerid ye Whether or not to hide outgoing caller ID Override with 67 or 82 hidecallerid n Whether or not to enable call waiting onFXO lines callwaiting ye Whether or not restrict outgoing caller ID will be sent asANI only not available for the user 7 Mostly use withFXS ports restrictcid n Whether or not use the caller ID presentation for the outgoing cal that the calling switch is sendin usecallingpres ye j Support Caller ID on Call Waitin callwaitingcallerid ye Support three way callin threewaycalling ye Support flash hook call transfer requires three way calling transfer ye Support call forward variabl cancallforward ye Whether or not to support Call Return 69 callreturn ye Stutter dialtone support If a mailbox is specified then when voicemai is received in
237. s are signalled using in band single freq tone The syntax is channel gt sf xfreq is rx tone freq in hz rxbw is rx notch and decode bandwith in hz typically 10 0 rxflag is either normal or inverted txfireq is tx tone freq in hz txlevel is tx ton level in dbm txflag is either normal or inverted Se rxireg or txireq to 0 0 Lf that tone is not desired unused No signalling is performed each channel in the list remains idl clear Channel s are bundled into a single span No conversion or signalling is performed and raw data is available on the master indclear Like clear except all channels are treated individually and are not bundled bchan is an alias for this rawhdlc The zaptel driver performs HDLC encoding and decoding on the bundle and the resulting data is communicated via the masterdevice feshdlic The zapdel driver performs HDLC encoding and decoding on the bundle and performs incoming and outgoing FCS insertion and verification dchan is an alias for this nethdlc The zaptel driver bundles the channels together into an hdlc network device which in turn can be configured with sethdl available separately dacs The zaptel driver cross connects the channels starting at the channel number listed at the end after a colo The channel list is a comma separated list of channels or ranges for example 1 3 5 channels one three and five 16 23 29 channels 16 through 23 a
238. s are usually 64 kbps The PSTN and enterprise switches can both offer services like call waiting call hold and call transfer While a Class 5 switch can handle hundreds of thousands of simultaneous calls enterprise switches ar typically much smaller Class 5 is an telephone industry call control standard Central office switches use Class 5 Most enterprise switches use proprietary manufacturer protocols Most proprietary enterprise Switches provide advanced features that are not available on Class 5 switches Class 5 switches were developed to support residential telephony not complex business services Enterprise switches typically provide much much richer feature set The high use feature rich services available on proprietary enterprise switche are available on Aterisk There are a variety of IP routing protocols including Router Information Protocol RIP Interior Gateway Routing Protocol IGRP Enhanced Interior Gateway Routing Protocol EIGRP Intermediary System to intermediary System IS IS Open Shortest Path First OSPF and Border gateway protocol BGP Each of these protocols provides a different solution to the problem of routing updates that solves a different problem Each of these accomplishes the same thing routing a packet from th source to the destination Similarly there are several Internet open call control protocols They all resolve traffic to IP addresses They currently include H 323 SGC
239. s circuitry that communicate withT Carrier A connection between the telephone company Tl drop and the router establishes the connection You can connect from the Tl drop to the router It is advisable to use a real RJ45 cable instead of a CAT5 cable This is described in the section on cables and connectors below If you are using the T1 line only for data your configuration may be complete when you configure your router and connect i to your LAN This will provide a path for data from your company to the other end of the T1 line A channel that is used to place telephone calls to the PSTN must be connected to the PSTN for example a CO central office If you are using the Tl for telephone calls to the PSTN you will need some piece of equipment that provides a connection between your analog telephones or fax machines and the Tl line If you are using the Tl for making telephone calls your router may have a connector on the back that accepts T1 cable This means the router is smart enough to take telephone traffic off the Tl channels an route them to the telephone connectors on the back of the router You may have a separate piece o equipment called a channel bank that accepts the T1 line IP Phones will of course connect to your local area network not the analog connectors A VoIP call can be sent over a Tl DSO channel as data This data channel could be connected to your ISP Th telephone call would then be routed over theIntern
240. s for each of the regions The calle selects the Southwestern region Asterisk tells them the extension for Julie announces her name and then announces it will contact her The Asterisk server in Chicago rings the telephone on Julie s desk Since this call is being made over thelnternet over Julie s DSL line there is no long distance charge between Julie and the head office If Julie doesn t answer within si rings the caller is given the choice of leaving a message or returning to th Sales directory or talking with the operator An Asterisk system is a fraction of the cost of legacy PBX systems The additional hardware that turns a small Linux server into a telephone system is inexpensive and readily available Support is availabl from different sources including Signate Asterisk is incredibly efficient A small PC will serve many telephone users With Asterisk you can easily build a telephone system for the smallest or the largest enterprise There are Asterisk server running thousands of phones right now You can easily scale or combine Asterisk systems to serve an number of users in any number of locations When combined with low cost Linux telephony hardware Asterisk creates a PBX ata fraction of the price of traditionalPBX systens While an Asterisk system is a fraction of the cost of legacy systems it provides better functionality than the most expensive proprietary systems Asterisk includes feature such as voicemail interactive voice
241. s the uniform resource indicator for messages in this example extension 8500 messages_uri 8500 Make sure that sip conf has the caller ID specified for each user callerid Brian 300 callerid John 310 The following entry in extensions conf will enable voice mail The argument yourcontext refers to the voice mail context invoicemail cont exten gt 8500 1 VoicemailMain2 EXTEN yourcontext exten gt 8500 2 Hangup Any user dialing extension 8500 will be directed to voice mail Specify the messages uniform resource indicator in the configuration file for the individual phone SIPXXXXXXXXXXXX cnf messages_uri 4008 Modify sip cnf to include a mailbox entry as shown below This specifies a mailbox number and a context found within voicemail cnf in this case 4008 inside 4008 type friend This device takes and makes call username 400 secret yoursecre context inside The context in voicemail cn callerid TUser lt 8005551212 gt qualify 100 host dynamic This host is not on the same IP addr every tim canreinvite n mailbox 4008 inside Activate the message waiting light defaultip192 168 0 12 Please consult Cisco SIP IP Phone Administrator s Guide for an explanation of all the SIP parameters for the 7960 There is a separate edition of this document for eachSIP firmware version You should do this to familiarize yourself with the capabilities of the phone This chapter describes the SNOM IP te
242. s well as channel Here are some complete examples TT amp m 1 12 nethdlc 13 2 fxsls 25 26 27 2 fxols 29 3 fxoks 1 24 bchan 25 47 dchan 48 fxols 1 12 fxols 1 amp m 25 29 nethdlc 30 3 clear 4 clear 4 clear 4 clear 4 fcshdlc 4 dacs 1 24 4 You can preload some tone zones to prevent them from getting overwritten by other users if you allow non root users to open dev tor interfaces anyway This means they won t have to be loaded at runtime The format is loadzone where the zone is a two letter country code You can specify a default zone with default zone where zone is a two letter country code loadzone u loadzone f loadzone d loadzone u loadzone f loadzone j loadzone s loadzone n defaultzone u The file etc asterisk zapta conf contains the configuration information Asterisk needs for its use of any Zaptel hardware Following is the sample configuration file shipped with Asterisk for etc asterisk zapata cont Zapata telephony interfac Configuration fil channels i Default language i Language en i Default context i context default r Switchtype ODPRI national NationalISDN 2 default dms100 Nortel DMS10 4ess A amp T 4ESS f F T Lucent 5ES EuroIsD Old NationalISDN 1 Sess euroisdn nil switchtype nationa 7PRI Dialplan Only RARELY used for PRI unknown Unknow private PrivateISDN local LocalISDN national National
243. selected end point you can always get service from an alternate vendor You pay the alternate vendor for both parts the loca loop and the remaining connection When an alternate vendor quotes you a price for your T1 line yo will most likely be quoted two amounts One amount will be for the local loop the other amount wil be for the remaining portion of the T1 line Here the prices can vary a lot This is where it pays t shop You may not need all of a T1 Part of a T1 may be enough for your application This is called a fractional T1 You can often rent a fractional T1 With the right equipment you can share a single T1 between network and PSTN connections For example you could devote 12 channels of your T1 to anlnternet connection and 11 to telephone calls Lastly if you are cautious and you can afford it you might want two different connections from two different companies That way one connection is always likely to be working There are providers who will rent you telephone numbers and connect you to the PSTN over a network connection instead of a PSTN connection for example voicepulse com Your Asterisk system connects to their VoIP system over yourlnternet connection They have a connection to the PSTN They will provide you with telephone numbers and a bridge to thePSTN Consider a business with offices in two different locations If there is sufficient call volume between the two sites it may be cost effective to rent a tie
244. ser names and caller id information signalling fxo_l group callerid Joe Schmoe lt 256 428 6131 gt channel gt 25 callerid Megan May lt 256 428 6132 gt channel gt 26 callerid Suzy Queue lt 256 428 6233 gt channel gt 27 callerid Larry Moe lt 256 428 6234 gt channel gt 28 The following activation codes are available with analog telohones operating on Zaptel interfaces Q Flash external trunk on bridged channel 67 DisableCaller ID for next outgoing call per call blocking 69 Call return Dials number of last caller if caller ID was present 70 Disable call waiting for the next call or until hangup 72 Cancel call forwarding 73 Enable call forwarding 78 Enable do not disturb 79 Disable do not disturb 80 Blacklist the caller who called previously IfCaller ID was present 82 Enable caller ID on a line with per line blocking To transfer a call from an analog phone on a ZAP channel hook flash On some phones press the R button this puts call 1 on hold dial tone is playe dial another end poin talk to that extensio hook flash agai This creates a 3 way call You can stay on the 3 way call If the line is enabled in the dial plan hanging up will leave the other two parties on the call If call transfer isn t enabled for the line hanging up wil disconnect all parties Asterisk servers or Asterisk devices like AX telephones can connect to remote Asterisk systems with
245. service appears to be located in the foreign exchange area See File Transfer Protocol FX see Foreign Exchange See Foreign Exchange Office port A port used to connect to a DID line See Foreign Exchange Service Port A port used to connect to a local analog telephone device Global System for protocol used Tor Hang Up End the telephone IC See Interexchange ILEC Mobile Communications A European encoding cellular telephone calls connection Carrier See Incumbent Local Exchange Carrier A Incumbent Local Exchange Carrier The dominant phone carrier providing exchange service within a geographic area as determined by theFCC InterExchange carrier A company that provides long distance services between LECs and LATAsS In Band Signals sent over the same bandwidth as the data Installation The provision of connections for new or additional service IGRP Interioe Gateway Routing Protocoll Institutional Phones Telephones other than payphones located in public institutions such as universities prisons or public offices or in hotels or motels or in other premises where the Customer may not be able to control access to the phones Integrated Services Digital Network A set of communications standards providing digital network services Interactive Voice Response system An automated voice response system used to guide users through a series of choices Interexchange
246. single delta DSO channel 2B D The bearer channels are used for data transmission The delta channel is used for out of band signalling fo example call setup Because of tariffs BRIISDN is typically an expensive service to operate BRI ISDN lines are typically charged by the minute which causes the cost to quickly rise While ISDN has had some success in video conferencing because of the cost it has never become very popular in Nort America More modernDSL technology has replaced ISDN for anyone who has access to DSL BRI is still popular and cost effective in many European locals A Primary Rate Interface PRI in North America and Japan consists of 24 channels usually 23 B 1D channel with the same physical interface as a Tl where all the channels operate at 64 kbps Th combinedPRI channels results in a digital signal 1 T1 interface at the network boundary In some areas outside the US the PRI usually has 30 B 1D channel and an El interface As with the BRI the D channel is used for out of band signalling While aPRI is an ISDN connection it is rarely referred to as such T Carrier sends data over the line in bytes Each byte is sent in order one after the other in frames A single frame contains one Byte 8 bits of data for each channel An extra bit is then sent to synchronize the data stream This extra bit is called a Frame Bit 193 bits 192 data bits and one framing bit are sent for each frame Th
247. specified in voicemail conf A call group allows any phone in the group to answer an incoming call directed to any of the phones in the group If you include aSIP channel as part of a call group you can use 8 to pick up an extension when it rings from any extension in the call group You must specify the callgroup and pickupgroup sip conf 3000 type frien username 300 secret mypasswor host dynami context from si callgroup callgroup As of the time of writing this book Asterisk does not yet support SIP over TCP Asterisk only supports SIP over UDP Digium cards provide connectivity to the PSTN or to local telephony devices like analog telephones or fax machines Digium makes a variety of telephony interface cards for Asterisk They range from th singleFXO line X100P to quad span T1 and quad span FXO FXS cards You can have one or more of these cards installed in your Asterisk server Other manufacturers make channel banks that supplemen the connectivity available with Digium cards The following quote is from zapatatelephony org and explains why the interface is named Zapata When you buy standard commercially available computer telephony hardware these days after having your wallet absolutely raped you find that the product i broken or at least has funny quirks that even the manufacturer doesn t seem t know about or care about and isn t interested in or for that matter capable of giving you any reasonable leve
248. splays RSA key information Show status of local channels Show manager commands Show connected manager users List modules and info Lists parked calls A show queues A show switches A show translation A show uptime A show version A show video codecs A sip debug A sip no debug A sip show channels A sip show channel A sip show inuse A sip show peers sip show registry sip show users skinny debug gt gt gt D gt gt skinny no debug A skinny show lines A soft hangup A stop gracefully A stop now A stop when convenient A transfer A unload A zap destroy channel A zap show channels A zap show channel A Show status of queues Show alternative switches Display translation matrix Show uptime information Display version info Shows video codecs Enable SIP debugging Disable SIP debugging Show active SIP channels Show detailed SIP channel info List all inuse limit Show defined SIP peers Show SIP registration status Show defined SIP users Enable Skinny debugging Disable Skinny debugging Show defined Skinny lines per device Request a hangup on a given channel Gracefully shut down Asterisk Shut down Asterisk imediately Shut down Asterisk at empty call volume Transfer a call to a different extension Unload a dynamic module by name Destroy a channel Show active zapata channels Show information on a channel With Redhat Linux copy the script usr src redhat asterisk redhat
249. st be configured properly as well Consult the later section on musiconhold conf for an example This example will ring two extensions simultaneously Globals are used to make the configuration more easily readable globals PHONE1SIP 101 PHONE2SIP 102 TWOPHONES S PHONE amp PHONE2 Sample exten gt 101 1 Dial TWOPHONES 30 t This is an example of using goto and gotoif In the following example the Goto fTime executes every weekday from 9am to 5pm in every month exten gt 4035 1 GotolIfTime 9 00 17 00 1 12274 2 exten gt 4035 2 Dial N1 exten gt 4035 3 Dial Hangup exten gt 4035 4 Goto default 4009 1 exten gt 4009 1 Dial S N2 exten gt 4009 2 Dial Hangup Gotolf expect two labels If you only provide one label a warning is written to var log asterisk messages Here is a sample configuration for including emergency 911 and 411 dialing support in your dial plan emergency ignorepa gt 9 j 21 strip off the first digit dialed exte gt _9 49 11 1 Dial PRITRUNK1 EXTEN 1 exten gt _9 49 11 2 Congestion exten gt _9 49 11 102 Busy exten gt _ 49 11 1 Dial PRITRUNK1 EXTEN 0 exten gt _ 49 11 2 Congestion exten gt _ 49 11 102 Busy This is an example of local calling support trunklocal ignorep gt 9 exten gt _9NXXXXXX 1 Dial PRITRUNK1 650 EXTEN 1 exten gt _9NXXXXXX 2 Congestion exten gt _9NXXXXXX 102 Busy exten gt
250. t Voice Encryption Do you need direct inward dialing DID that is telephone company service How many modem and FAX lines do you need If you need DID for how many employees What is the expected growth over the next 5 years Do you need phones in public areas Do you need phones in conference rooms How many conference rooms do you have How many people will need a telephone How many people will need voicemail How many people will need caller ID How many people will need speaker phone capabilities Do you need dial in capabilities for mobile users Do you want need an automated attendant Will you have a receptionist who will answer and route calls Do you need voicemail What features do you want in voicemail if it is needed Do you need an overhead paging system Do you need door entry systems with an intercom Do you need to be able to turn phones on and off hotel hospital and so on Do you have telephone wiring in place for analog phones or fax machines If there is existing wiring is it adequate How will the phones be powered transformers or inline on the ethernet Do you have wire and phone jacks in the desired locations Do you have room for a phone server and the associated cable plant Do you have several buildings that will be served by this phone system If you have room is it climate controlled If you need to wire for the phone system will this be done in house or contracted How di
251. t cnf to reflect POS3 06 0 00 Reset the phone The files the phone will request fro theTFTP data directory are shown below TABLE 13 8 OS TIOL a WAGE SIPpetault cnt SIPSlPmaceccress cue RINGLIST DAT ringerl pcm Tinge TZ Joc PO0S3 06 0 00 bin PO0S3 06 0 00 sbin The Cisco SIP IP Phone Menu Interface settings are changed through the menu interface Use the down arrow to scroll to and highlight a parameter or press the number for the parameter on the keypad The number is shown to the left of the parameter on the LCD display Use for dots periods or press the soft key when available on the LCD Cancel cancels all changes and exits the current menu To configure a SIP IP address or ID parameter press the Number soft key to enter a number or press the Alpha soft key to enter a name Then use the buttons on the dial pad to enter the desired value The 2 key has the letters A B and C For a lowercase a press the 2 key once To select different letters or numbers keep pressing the same key Press the lt lt soft key to backup After changing a parameter press the Validate soft key to save the value and exit the Edit panel The xml file dialplan xml in the tftp directory specifies the dial plan for all installed 7960 phones A dial plan changes how the phone operates while the user is dialing For example without a dial pla the user must press the numbers to be dialed and then press the dial soft button to s
252. t g723sf wav49 wa format wav49 gsm wa Who the e mail notification should appear to come fro serveremail asteris serveremailasterisk linux support net Should the email contain the voicemail as an attachmen attach ye Maximum length of a voicemail messag maxmessage 18 Maximum length of greeting maxgreet 6 How many miliseconds to skip forward back when rew ff in message playbac skipms 300 How many seconds of silence before we end the recordin maxsilence 1 Silence threshold what we consider silence the lower the more sensitive silencethreshold 12 Max number of failed login attempt maxlogins Skip th PBX string from the message title pbxskip ye Change the From strin fromstring The AsteriskPBX Change the email body variables VM_NAME VM_DUR VM_MSGNUM VM_MAILBOX VM_CALLERID VM_DAT emailbody Dear VM_NAME n n tjust wanted to let you know you were just left S VM_DUR long message number VM_MSGNUM nin mailbox VM_MAILBOX fro S VM_CALLERID on VM_DATE so you might nwant to check it when you get chance Thanks n n t t t t Asterisk Users may be located in different timezones or may have different message announcements for their introductory message when they enter the voicemail system Set the message and the timezone each user hears here Set the user into one of these zones with the tz attribute in thes field of the mailbox Of course language substi
253. t making incoming connection the local call number TAX mark192 168 0 1 14 call number 14 from mark at 192 168 0 1 TAK192 168 10 1 13 call 13 from 192 168 10 1 A section begins with the identifier in square brackets The identifier should be an alphanumeric string identifier The section name of the first section of iax conf must always be general The following commands are allowed in the general section of iax conf port This sets the port that IAX binds to The default AX port number is 5036 Don t change this port number bindaddr This binds IAX to a specific local IP address instead of binding to all addresses This can enhance security For example you might only wanted IAX to be available to users on your LAN bandwidth low medium high This selects codecs appropriate for the given bandwidth The value high enables all codecs and is recommended only for 10Mbps or higher connections A value of medium eliminates signed linear Mulaw and A law codecs leaving only the codecs which are 32kbps and smaller with MP3 as a special case A value of medium is useful with broadband connections A value of low eliminates ADPC and MP3 formats and uses only the G 723 1 GSM and LPC10 allow gsm 1lpc10 g723 1 adpcm ulaw alaw mp3 slinear all disallow gsm 1lpcl10 g723 1 adpcm ulaw alaw mp3 slinear all The allow and disallow commands override the initial bandwidth selection on a codec by codec basis Th
254. tart a call With dial plan dialing numbers can start a call immediately A dial plan can support automatic dialing an automatic generation of a secondary dial tone The same dial plan can be specified for all phones by changing the file dialplan xml You can change the dial plan for phones individually by changing thedial_template parameter in the phone specific configuration file The xml file must start with and must end with dial plan rules are matched from start to finish The longest matching rule is always used Matches against a period are not counted for the length to be the longest Use any ASCII editor to change dialplan xml Each rule is specified on a separate line The syntax for rules i TEMPLATE MATCH pattern Timeout sec User type Rewrite altstrng Route route MATCH pattern is the dial pattern to match A period matches any character An an asterisk to matches one or more characters A comma causes the phone to generate a secondary dial tone after part of a template matcheTimeout sec The number of seconds before a timeout Specify zero to dail immediately User type Either IP or Phone Add User phone or User IP to automatically add the tag to the dialed number This parameter is not case sensitive Rewrite xxx An alternate string to be dialed instead of what is entered by the user Rewrite rules are matched from start to finish The longest matching rule is used A complete rul
255. te extension Wait Waits for some tim WaitForRing Wait for Ring Applicatio WaitMusicOnHold Wait playing Music On Hol Billin NoCDR Make sure asterisk doesn t save CDR for a certain cal ResetCDR Reset CDR dat SetAccount Sets account cod Asterisk cmd SetCDRUserField Set CDR User fiel Asterisk cmd AppendCDRUserField Append data to CDR User fiel Answer Answer a channel if ringin Busy Indicate busy condition and sto Congestion Indicate congestion and sto Dial Place an call and connect to the current channel DISA DISA Direct Inward SystemAccess Hangup Unconditional hangu Caller presentation ID Name etc CallingPres Change the presentation for the calleri LookupBlacklist Look up Caller ID name number from blacklist databas LookupCIDName Look up CallerID Name from local databas PrivacyManager Require phone number to be entered if no CallerID sen Ringing Indicate ringing ton SetCallerID Set CallerID SetCIDName Set CallerID Name SoftHangup Request hangup on another channe Zapateller Block telemarketers with SI DBdel Delete a key from the databas DBdeltree Delete a family or keytree from the databas DBget Retrieve a value from the databas DBput Store a value in the databas Extension logic strings application integratio AbsoluteTimeout Set absolute maximum time of cal AGI Executes an AGI compliant applicatio Cut String handling functio DigitTimeout Set maximum timeout between digit EAGI
256. tem up and running can be difficult It can very much be a process of trial and error Check the Asterisk users mailing list archives for help You can refer any remainin questions you have to the asterisk users mailing When you have your simple configuration running congratulations and welcome to VoIP telephony with Asterisk This chapter describes how to configure the Cisco 7960 IP telephone for SIP SIP is described in a separate chapter Cisco phones and adaptors can act as aSIP client and communicate with a SIP server The 7960 is a very high quality phone and a highly capable SIP device It is expensive It is poorly documented Cisco support for the phone has often not been good Often the tech support staff are not familiar with the 7960 runningSIP Once you overcome these barriers and the phone is operational it is very reliable Users like this phone a lot For operation with Asterisk the 7960 should be configured to run with SIP instead of the proprietary SKINNY protocol There are several versions ofSIP available from Cisco for the 7960 This chapter shows how to convert a 7960 toSIP if it is not already running SIP This chapter gives detailed instructions for upgrading the 7960 to each of the available versions of SIP Note that all the 7960 telephones on a subnet must run the same version ofSIP At the time of writing the latest version of SIP for the 7960 was version 6 0 You should upgrade your phones to at l
257. ten seats can run comfortabl on a PC with a 2 GHz processor 256MB of memory and an ethernet adaptor A 40GB drive wil allow you to install Linux and Asterisk and have a considerable amount let over for voicemail Make sure there are enough open slots for any communications boards you will be running for exampl Digium T1 FXO or FXS adaptors A minimum configuration might be a 1GHz processor with 128MB of memory and a 20GB disk Asterisk will run as a VoIP server with no telephony interface boards This can make for a very useful system An Asterisk server can use Inter Asterisk Exchange IAX to connect to a remote Asteris server If the remote server has the required Digium boards and an interface to thePSTN the first server can access thePSTN through the remote server with IAX Even if you don t have any interface boards installed you must install the Zaptel drivers to use confer encing Telephone interface boards that work particularly well with Asterisk are available at an attractive price fromhttp www digium com Digium provides boards to interface to T Carrier POTS and local Analog devices The Mepis Linux distribution includes all the Linux software you need to run Asterisk Mepis is a Debian Linux distribution Other distributions may require more work to install and configure Asterisk should install easily and run well on a recent Linux distribution The easiest way to guarantee the operating system packages Asterisk requir
258. terface drive local Loopback into another contex Hi323 H323 IT phone Linux Telephony channe agent ACD Agent channe Outgoing channels for example for the Dial application use names with the same format Later chapters describe how to configure various types of channels Asterisk supports a variety of hardware interfaces for connecting telephony channels through a Linux computer All Digium Hardware shares a common driver suite and uses a common interface library Digium drivers are based on the Zapata Telephony Driver suite This set of drivers is often called Zaptel Zapata is an open source project available athttp packages qa debian org z zaptel html The zaptel telephony infrastructure was jointly developed by Mark Spencer of Linux Support Services Inc an Jim Dixon of Zapata Telephony Even if no interface cards are installed you must install at least one Zaptel driver to enable conferencing Asterisk does not require a sound board to operate unless you are using a soft phone on the computer running Asterisk The zaptel interface uses the host processor to simulate the time division multiplexor TDM bus typically built into other telephony hardware interfaces e g Dialogic and other H 100 vendors The resulting pseudo TDM architecture requires more CPU power but provides a substantial savings i hardware cost and a substantial increase in flexibility Zaptel interface cards are available from Digiu http www digium
259. terisk AX allows Asterisk to merge voice and data traffic seamlessly across disparate networks When using Packet Voice data like URL information and images can be sent in line with voice traffic This supports advanced integratio of voice and data that is not available in legacy systems Asterisk provides a central switching core with four APIs for modular loading of telephony applications hardware interfaces file format handling and codecs Asterisk provides transparent switching between all supported interfaces This is how Asterisk ties together diverse telephony systems into single switching network Scenario An International Business An electronics manufacturer has main offices in San Jose California with international offices in London Tokyo Hong Kong and Munich Asterisk servers are in hosted facilities in San Jose and Tokyo Asterisk servers are in th Hong Kong Munich and London offices All the Asterisk servers have high speed connections to the Internet All the servers have connections to local public telephone systems Because the Asterisk servers are connected over the Internet there are no long distance charges for calls between the offices Any user in any office can call any user in any other office These calls are routed over thelnternet that is they are toll bypass calls The support staff for this company is all at the San Jose headquarters Instead of having support staff in the London office management d
260. that mailbox taking the phone off hook will caus 7 a stutter dialtone instead of a normal on mailbox 123 Enable echo cancellatio Use either yes no or a power of two from 32 to 256 if you wish to actually set the number of taps of cancellation echocancel ye Generally it is not necessary and in fact undesirable to echo cance when the circuit path is entirely TDM You may however reverse thi 7 behavior by enabling the echo cancel during pure TDM bridging below echocancelwhenbridged ye In some cases the echo canceller doesn t train quickly enough an ther 7 is echo at the beginning of the call Enabling echo training wil caus asterisk to briefly mute the channel send an impulse and use th impuls response to pre train the echo canceller so it can start out with muc Closer idea of the actual echo echotraining ye If you are having trouble with DTMF detection you can relax th DTMF detection parameters Relaxing them may make the DTMF detecto 7 more likely to have talkoff where DTMF is detected when it shouldn t be crelaxdtmf ye 7 You may set the default receive and transmit gains in dB rxgain 0 txgain 0 Logical groups can be assigned to allow outgoing rollover Group range from 0 to 31 and multiple groups can be specified group Ring groups a k a call groups and pickup groups If a phone i ringin and it is a member of a group which is one of your pickup groups
261. the MAC address by pressing buttons on the phone PressSettings Use the scroll key below the screen and the select soft button below the LCD screen to select Network Configuration and then MAC Address Edit the file Remove all the lines at the end of the file that are for SIP versions past version 2 0 If you don t remove these lines after booting the phone status will show an error condition either a buffe overflow condition or a failure to parse the file Connect the telephone with the MAC address named by the SIP MAC_Address cnf file to the network Power on or reboot the phone When the phone boots it will first request the file named OS79Xx TXT from the TFTP server This file contains the name of the image the phone should access The image file POS30203 bin must be available in the TFTP directory The other configuration files must be available in theTFTP directory The headset mute and speaker lights light together on for a moment and then turn off The Green headset lamp lights for about fifteen seconds Then the mute light comes on for a moment followed b the speaker light The phone display will show Configuring vla Configuring I During this step configuring IP the phone contacts the DHCP server You can monitor this process by looking at the log file where DHCP writes its log entries In Mepis this is var log syslog Use the Linux comman tail f syslo to monitor the file as it is wr
262. the dialed channels picks up the call the dial command will bridge the two channels The dial command can answer a call fro an originating channel If there is no answer and the calling party does not hang up only a time out will top the dial command If a time out is not specified the dial application will wait indefinitely until either one of the called channels answers the user hangs up or all channels return busy or error They syntax for the dial command is Dial Technology resource amp Technology2 resource2 timeout options URL The option string for the dial command may contain zero or more of the following characters eo allow the called user to transfer the calling user T allow the calling user to transfer the call r a sound ringing to the calling party pass no audio until answered m a provides hold music to the calling party until answered H a allow caller to hang up by hitting Cra reset the call detail record for this call P x a privacy mode using x as database if provided omy continues in context if the destination channel hangs up A x a play an announcement to the called party using the sound file named S x a hang up the call x seconds AFTER the called party answer D digits a allow post connect dtmf stream Sends the DTMF digit string after called party has answered but before th w 500ms bridge paus A dialed call may be transferred A dialed
263. the extremely long propagation delays of a satellite link IP does not directly support real time traffic sessions Real Time Transport Protocol RTP is the emergent protocol for real time traffic sessions over IP networks The packets for a particularRTP session are referred to as anRTP stream or a media stream RTP is commonly used to transport voice traffic Many applications for example Microsoft Net Meeting useRTP In a real time environment like voice re sending a lost packet is too time consuming Small numbers of lost packets in a voice stream are not noticeable to a listener It s better to ignore the lost packet than re transmit them UnlikeTCP UDP is an unreliable protocol That is there is no guaranteed delivery of a packet withUDP This is one of the reasons why RTP runs over UDP instead of TCP Packets that are part of a real time session can arrive out of order RTP packets each contain a timestamp The timestamp allows the receiving application to reassemble incoming packets in the correct order RTP uses the packet timestamps to tune its settings RTP can use the timing information to adjust for network problems like delay and jitter as well as packet loss Call control is the process of managing and routing a call For the PSTN management and routing are both managed by SS7 VoIP IP bearer streams are separate from call control An enterprise class switch is circuit switched Like the PSTN channel
264. the server You will now have to configure the various packages like DCHP and TFTP Here are some tips for installing Red Hat Fedora 1 Install Fedora Core 1 with all the development environments This is available at http fedora redhat com download Be sure to install the kernel development source You will not be able to build Asterisk without the kernel development package Here are some suggested choices for choices you will have to make while installing Fedora 1 Upgrade new installation A 2 Install Type completeA 3 Partitioning automatic remove all partitions A 4 Firewall Only install if you know how to configure firewalls a A 5 Package Group Selection A Desktops none Applications Editors Text based Internet Sound and Video Servers all Development Development Tools Kernel Development System all A 5b Static vs Dynamic IP Address Static Address You can configure the system to boot to run level three You may want to turn off any non essential services For remote access enable SSH Before configuring Asterisk you must configure any hardware you are using This includes SIP phones soft phones channel banks or communications boards The following chapters show configuration for these various channel types After any hardware and channels have been configured you can configure Asterisk Much of the information in the book came from the Asterisk Wiki pages at htto w
265. times out Call parking is configured with the file parking conf Here is an example general parkext gt 701 dial this extension to park the call parkpos gt 702 720 extensions to park calls context gt parkedcalls context for parked parkingtime gt 1355 Time limit for parked calls default is 45 seconds Be very careful with the parking context Only allow authorized users to use parking You don t want an outside caller to be able to park calls Here is a sample to create a parking context that includes two extensions in extensions conf parking exten gt 1 1 Dial SIP phonel 20 tr exten gt 2 1 Dial SIP phone2 20 tr In this example the t after the time of twenty seconds allows calls to be transferred The r lets the calling party know the extension is ringing Using a capital T will allow the calling party to park calls During a call press to park that call You will hear a voice say Cransfer Dial the number of the parking extension in the example above extension 701 If you dial the parking extension quickly enough you will hear a voice prompt of the extension the call is parked on Dial that extension from any phone in the parking group to retrieve the call While running Asterisk provides a command line interface Commands may be given to examine or control a running Asterisk system If an application is already using your sound device Asterisk may not process sounds properly For ex
266. tive that any competing telephone system Asterisk provides all the functionality of a traditionalPBX but it also provides new features and capabilities a legacyPBX can t offer Because Asterisk is open you can change it and tune it as needed unlike legacy systems which only provide closed black boxes with closed interfaces With Asterisk you will neve again get locked into proprietary obsolete equipment from an unappealing single source vendor This book documents the first release of Asterisk Asterisk is quickly evolving which makes it exceedingly difficult to completely and effectively document Thus this book is not a complete guide to all the functionality Asterisk provides Not every Asterisk feature is covered not every covered feature i covered completely None the less this book should help you more quickly come up to speed wit Asterisk have tried to write the book wanted to have while was learning Asterisk have worked extremely hard to assure the accuracy of this text and others have greatly contributed in their review of this book but errors are unavoidable If you find an error please let me know with mai tobookbugs signate com or by going to our Web page at http asterisk signate com so that we can fix it for the next edition While this book is the result of the contribution of many people the errors o omissions are my responsibility alone Paul Mahler asterisk signate com http www signate com There wouldn t be
267. tonomous system routing protocol An autonomous system is a network or group of networks under a common administration and with common routing policies BGP is used to exchange routing information for the Internet and is the protocol used between Internet service providers ISP Billing Account Number A designated billing account a customer or customer location where the bill is sent A single customer can have multiple BANs Banded Rates Tarriffed Rates which a carrier can change at their discretion within a certain range Bell Customer Code A three digit number appended to the end of a billing account number to assist in the unique identification of a customer Bell Operating Company A local or regional telephone company that operates local exchanges BOC See Bell Operating Company A BGP Border Gateway Protocol A Bong An sound used to prompt a user to enter additional information For example after typing 1010555 a bong might sound to indicate that the user should enter an billing code Billing Telephone Number The phone number calls are billed to The calling number can differ from the billing number Bypass Access to an alternate IEC by dialing an access code For example dialing 1010222 at the beginning of a call might access Sprint long distance Call Data Record A record of a call including the time the call was placed and the length of the call Called Station The station called or the te
268. tor2 o torisa o wcusb o wcfxo o wcfxs o ztdynamic o ztd eth o wctlxxp o wct4xxp o ztdummy When you make zaptel as described in the following section ztdummy will compile You will have to load the ztdummy kernel driver before starting Asterisk modprobe ztdummy To make the change permanent edit the file etc modules and insert the line ztdumm When you reboot the machine ztdummy will now load To see a list of loaded drivers run the command lsmo A third timing source is available from htto Avww junghanns net asterisk Zaprtc uses the system clock to provide timing information To use this module you will need to recompile the kernel withou real time clock support You will need to change to the kernel source directory and disable enhance real time clock support in menuconfig Note that this utility will not work on a multi processor system The module zapirtc will replace the standard real time clock module and includes extra facilities fo Zaptel Any telephony boards for example a Digium T1 card should already be installed in your computer Various drivers are needed to operate Asterisk These drivers are derived from the open source Zapata project These drivers are found in the zaptel directory Even if you don t have any interface boards installed at least one ZAPTEL interface has to be installed to enable applications that require timing for example voicemail and meetme conferencing As the super user from the com
269. trol protocol used to create modify and terminate a communications session ASIP invitation can establish sessions and describe sessions SIP features of user location user capability user availability call setup and call handling can initiate or en communications sessions Henning Schulzrinne one of the original architects of SIP said that the objective of SIP is the re engineering of the telephone system from the ground up He said this is an opportunity that appears only once after 100 years A SIP session can have one or more participants Sessions can include audio video and data streams SIP is flexible enough to support ad hoc conferencing Multi media SIP sessions can be multicast unicast point to point or combine broadcast methods While SIP is not yet as widespread as H 323 it is catching up fast Most modern application implementations are relying on SIP rather than H 323 SIP is extensible and will easily support additional functionality as it is needed SIP will outmode any proprietary protocols A sip user agent is a client end application continuing a user agent client UAC and user agent server UAS These are know as aSIP client and SIP server The client initiates SIP requests as a user s agent A server gets requests ASIP server acts as a user s agent There are two types of SIP network servers proxy servers and redirect servers Proxy servers contain client and server functions A proxy server acts
270. trunk Central offices are connected hierarchically Central office switche connect through trunks to tandem switches Tandem switches are referred to as Class 4 switches Class 5 switches often connect directly to each other These connections are put in place after analyzing calling patterns between switches If there are enough calls between two class 5 Switches a dedicated circuit is installed User U lerminal eculpmsnt User Network Signalling Certral Office Switch Central Office Switch User Network Signalling User ai Terrrinal Equ pment 4 ts Figure 16 3 PSTN A local loop that is a pair of copper wires can transmit analog or digital data to a central office There are two signalling paths in thePSTN End users signal the PSTN with user to network Signalling Switches in thePSTN signal each other with network to network signalling Signals can be analog or digital Dual Tone Multi Frequency DTMF signalling sends two simultaneous tones over the voice path Signaling can be in band or out of band For example DTMF is in band signalling Dialing a number sends analog DTMF signals to the central office switch over the voice circuit Out of band signalling sends signalling information on a separate channel from the transmitted voice For example a Basic Rate Interface provides two 64kbps bearer B channels used to send and receiv voice and a third 16 kbs D data channel used for out
271. tution still applies here so you may have several directory trees that have alternate language choices Look in usr share zoneinfo for names of timezones Look at the manual page for strftime for a quick tutorial on how the variabstitution is done on the values below Supported values filename filename of a soundfile single ticks around the filename required S VAR variable substitution Aora Day of week Saturday Sunday 7B oe b or A onth name January February Fae numeric day of month first second ar thirty first Y Year Lor L Hour 12 hour clock rams Hour 24 hour clock single digit hours preceded oh 7k Hour 24 hour clock single digit hours NOT preceded by oh M inut P orp AM or P 7 Q today yesterday or ABdY note not standard strftime value 7 gq for today yesterday weekday or ABdY note not standard strftime value R 24 hour time including minut zonemessages eastern America New_York vm received Q digits at IM central America Chicago vm received Q digits at IM central24 America Chicago vm received q digits at H digits hundred hours Mailboxes may be organized into multiple contexts for voicemail virtualhosting Each mailbox is listed in the if the e mail is specified a message will be sent when a message i received to the given mailbox If pager is specified a message will be sen there as well
272. ual Notification of Voicemail Call Detail Records Local Call Agents Remote Call Agents Protocol Bridging a Provides seamless integration of technologies a Offers a unified set of services to users regardless of connection type a Allows interoperability of VoIP systems Call Features a Music on Hold a Music on Transfer a Flexible mp3 based system a Volume Control a Random Play a Linear Play a Call Waiting a Caller ID a Caller ID Blocking a Caller ID on Call Waiting a Call Forward on Busy a Call Forward on No Answer a Call Forward Variable a Call Transfer a Call Parking a Call Retrieval a Remote Call Pickup a Do Not Disturb o Scalability a TDMoE a Allows Direct Connection of Asterisk PBX a Offers Zero Latency a Uses Commodity Ethernet Hardware a Voice over IP a Allows for Integration of Physically Separate Installations a Uses commonly deployed data connections a Allows a unified dial plan across multiple offices a Voice over IP Interoperability a Inter Asterisk Exchange IAX a H 323 Session Initiation Protocol SIP a Media Gateway Control Protocol MGCP a Traditional Telephony Interoperability a Robbed Bit Signaling Types a FXS and FXO Loopstart Groundstart a Kewlstart a E amp M a E amp M Wink a Feature Group D a PRI Protocols 4ES a Lucent 5E DMS100 a National ISDN2 a EurolSDN a BRI ISDN4Linux a Codec Support GSM G 729 available through purchase of commercial license s a G 723 1 pass throu
273. ured private branch exchange with capabilities for call distribution and interactive voice response Asterisk runs on indusitry standard hardware and shares your existing dat network rather than requiring separate lines and interconnection hardware This combination ca reduce business customers initial investment in telephony by as much as 90 and provides the opportunity for equally dramatic reductions in calling costs Even better Asterisk lets customers integrate their telephone system with other applications as easily as they integrate their CRM application with their accounting software Asterisk can be extende using its APIs dynamic module loader and AGI scripting interface and customers can add their ow applications that run on the system in C or any scripting language of their choice Asterisk means tha powerful capabilities like call recording and call retrieval will be affordable by the majority of businesses for the first time Paul Mahler s book on Asterisk will help you learn how to install configure and maintain Asterisk so you can begin realizing the benefits of open source telephony welcome you to the Asterisk community William Boehlke Presiden Signate LL Asterisk is a PBX and a lot more Asterisk is revolutionary reliable open source free software that turns an ordinary inexpensive PC running Linux into a powerful enterprise telephone system Asteris is an open source toolkit for telephony applications and a full
274. uring any Zaptel cards You must configure etc zaptel conf to configure the hardware interface for any Digium cards and etc asterisk zapata conf to configure Asterisk for use with any Digium cards While the configuration files may look intimidating setting up zaptel cards is actually pretty easy The zaptel channels are configured in the file etc zaptel conf The file zaptel conf contains configuration lines of the forma parameter valu Comment lines begin with the pound sign Here is an example configuration for a T100P and a TDM400P with four FXS modules taken from a working installation In this installation the T100P is connected to aPRI from SBC Four analog phones in the office are connected to the TMD400P Here is what appears in zaptel con zaptel conf span 1 1 0 esf b8z bchan 1 2 dchan 2 loadzone u defaultzone u fxoks 25 2 The following is part of the corresponding zapata conf file and configures the T1 line for twenty three voice channels and the one data channel that is reserved for thePRI signalling z Zapata con channels context defaul switchtype nationa signalling pri_cp switchtype dms10 group context mai channel gt 1 23 signalling fxo_ks context inside chan gt 25 28 Note that only 23 channels are available as the T1 is set up as a PRI Any calls coming in on a PRI channel will be managed by the main context inextensions conf The four FXO ports are set up as channels 25 to 28 An
275. var lib asterisk keys Private and public keys used within Asterisk for RSA authentication IAX uses keys stored here var lib asterisk mohmp3 MES riles Vsec tor mosie on holc The conrticuraclon Tor misie yal hole is Towne im the directory var lib asterisk sounds var lib asterisk sounds Audio files prompts etc used by Asterisk applications Some applications may hold their files in subdirectories var run Runtime named pipes and PID files var run asterisk pid Puealigebeyy Piers dente e 2 IID ue jclae seibliahnaLinve INSieSiesLSi lt OCES SE var run asterisk ctl Named pipe used by Asterisk to enable remote operation var spool asterisk Runtime spooled files for voicemail outgoing calls etc var spool asterisk outgoing Asterisk monitors this directory for outbound calls An outbound call results in a file in this directory Asterisk parses the created file and attempts to place a call If the call is answered it is passed to the Asterisk PBX usr spool asterisk qcall Used by the deprecated qcall application Don t use var spool asterisk vm Voicemail boxes announcements and folders Asterisk includes many applications These applications perform useful functions like dialing a telephone number or saving a voicemail message These applications are described at length in the chapter on Asterisk configuration This chapter describes connections between your Asterisk system and the Internet or the PSTN You must be fa
276. vetick usno navy mil option titp server nam 192 168 1 10 default lease time 600 max lease time 7200 If this DHCP server is the official DHCP server for the local network the authoritative directive should be uncommented authoritative 192 168 1 0 netmask 255 255 255 0 rangel 2 168 1 100 192 168 1 150 After configuring DHCP you can restart the DHCP daemon with the commands d ete init dhep3 server restar Some phones for example Cisco phones require access to a TFTP sever They download their firmware and configuration settings from TFTP TFTP is installed and enabled on the Mepis CD In the Mepis distribution var tftp is the default TFTP directory If you would rather run TFTP from a Windows server you will have to find and install a TFTP server NoTFTP server is included with Windows In other distributions make sure the TFTP sever directory named in the configuration file exists Make sure this directory has universal read and write permission Make sure all files in the TFTPboot directory are readable Be sure to test TF TP by requesting a file from a machine separate from you server Many operating systems including Windows include aI FIP client The Mepis TFTP installation writes log messages to var log syslog TF TP for Red Hat 8 leaves its message in the file var log messages There is no option on the Mepis CD to install Asterisk from the CD You can order an install CD for Asterisk fro
277. ww voip info org tiki index ph This is a gold mine of Asterisk information While have mined some of the gold there is still a lot left for you to find The Asterisk community done a tremendous service to the community in creating this resource You can get help from the Asterisk mailing list Consult www asterisk org for more information on support and the mailing lists Digium of course offers Asterisk support and free support for issues related to their hardware Sig nate www signate com is in the business of supporting Asterisk Configuration files control Asterisk operation Samples are provided to help you get started more quickly Sample configuration files are also provided with the Asterisk distribution You should b familiar with Asterisk architecture as explained in the earlier chapter before attempting to configur Asterisk After installing Asterisk and making the samples the following configuration files are present in etc asterisk You will have to modify many of these files to adapt Asterisk to your needs The following chapters will assist you asterisk conf Configuration directories for components agents conf agents enum conf ENUM lookups extensions conf The dial plan festival conf interface to Festival Speech Synthesis software H 323 conf H 323 channels iax conf IAX channels indications conf various indications busy tones etc manager conf the Asterisk manager API meetme conf
278. xemption Certificate A written notification provided by a Customer certifying that its dedicated facility should be exempted from the monthlySpecial Access Surcharge because a the facility terminates in a device not capable of interconnecting service with the local exchange network or b the facility is associated with aSwitched Access Service that is subject to Carrier Common Line Charges Expedite A Service Order that is processed at the request of the Customer in a time period shorter than the Company standard Service interval Extension context A group of extensions FBC See Facilities Based Carrier Facilities Based Carrier A carrier with their own facilities as opposed to a reseller of another companies services that has no equipment of their own FCC Federal Communications Commission File Transfer Protocol An internet protocol used for transferring files TCP IP Foreign Exchange An exchange that is not a user s local exchange local office Foreign Exchange Office Synonym for foreign exchange ETE uses see Foreign Exchange Service FTP FXO FXO FXS FXS GSM A service provided by a foreign exchange A network provided service where a telephone in a local exchange area is connected via a private line to a central office in another foreign exchange instead of the local exchange area s central office Note To call originators the subscriber having the FX
279. xtension That is the current extension will be used in the new context There is one conditional operator the conditional gotoif exten gt 1 2 gotoif condition labell label2 If condition is true go to abe 1 else go to label2 Labels are interpreted the same as in the normal goto command Thecondition is just a string If the string is empty or zero the condition is considered to be false if it s anything else the condition is true This is used with the expression syntax described above for example exten gt 1 2 gotoif CALLERID 123456 2 1 3 1 exten exten exten exten 2 SetVar vara 1 3 SetVar varb S S vara 2 4 SetVar varc varb 2 5 Gotolf S S varc 6 799 1 s 6 Vv WOM Pressing a dial pad key at a telephone often stops the dialtone Use the ignorepat command to continue dialtone after a key is pressed Note that the gnorepat command does not apply to SIP phones as a SIP phone generates its own dialtone You should be able to program mostSIP phones to continue dial tone during dialing ignorepat gt 9 Here are some examples of commands that are available for use in extensions conf exten gt s 2 Answer Answer the line exten gt s 5 BackGround demo congrats Play a congratulatory message congestion tonelis The set of tones played when there is congestion on the network The dial command sends a call out on one or more channels When one of

BY Paul Mahle ISBN 09759992-0-6 Mahler, P.S. Asterisk and IP

Contents

Download Pdf Manuals

Related Search

Related Contents