Phobya-Touch-Manual-DE - geänderte Version09-13
Contents
1. Connect the sixth channel fan light of the device P Connect the power supply THE MAIN INTERFACE 2 Connect the temperature sensors T1 Connect the first channel temperature sensor T2 Connect the second channel temperature sensor ge T3 Connect the third channel temperature sensor Sa DW Me Qs FAN Zp T4 Connect the fourth channel temperature sensor IZ FANS Ia FANS We AN Typ ZN T5 Connect the fifth channel temperature sensor T6 Connect the sixth channel temperature sensor O ALARM Use the mini jumper to activate the alarm function s 3 2 D the mini jumper ae ce 1 The light bulb button The light bulb button adjust the brightness SS A at of the screen There are three settings for the brightness If the light bulb button is not being used it will disappear in 6 seconds 2 The fan 1 button Touch it to enter the fan 1 branch interface 3 The fan 2 button Touch it to enter the fan 2 branch interface 4 The fan 3 button Touch it to enter the fan 3 branch interface 5 The fan 4 button Touch it to enter the fan 4 branch interface NOTE 6 The fan 5 button Touch it to enter the fan 5 branch interface In order to protect your computer the device has the alarm function 7 The fan 6 button Touch it to enter the fan 6 branch interface If the temperature exceeds 70 degrees Celsius the unit will be THE FAN BRANCH INTERFACE For example you touch the fan 2 button you will enter the fan 2 branch2. Phobya Touch 6 Fan Controller Single Bay 5 25 black SPECIFICATIONS Dimension 148 5mm x 42mm x 79 9mm 5 25 Bay emitting noise If the fans are not operating when the Screen dimension 112 5mm x 22 2mm voltage is over 6 5v the unit will be emitting noise Insert Power Output Up to 30 watts per channel the mini jumper to enable alarm function or remove it to Control Channel 6 Channels Color Available Black Anodized Silver disable the alarm function DC Input 12V Standard 4 Pin Connector P DC Output 5V 12V DC 40 100 ACCESSORIES Fan Connectors Six 4 pin connectors A Phobya Touch 6 H INSTALLATION E e 1X Installation Guide 1X Power Cable 6 X Fan Cable 6 X Sensors Cable Tools required Phillips head screwdriver M ya Mount the product into a 5 25 inch drive bay of your computer gt amp 5 chassis using the screws in the accessory bag 4 Fe CONNECTIONS 4X Screws 1X Jumper 3 Use the mini jumper to Connect the fans activate the alarm function ttt hak kt es ee 6x Sticker for temperature sensors DD ag OPERATION Connect the Connect the temperature sensors power supply 1 Connect the fans Fan1 Connect the first channel fan 5 D Fan2 Connect the second channel fan Fan3 Connect the third channel fan Fan4 Connect the fourth channel fan Fan5 Connect the fifth channel fan O Power button The power button could turn or shut the back Fan6
3. interface The RPM and Voltage readout Select the RPM or Voltage for readout by touch 2 The temperature readout Select Celsius or Fahrenheit for readout by touch 3 The left arrow button area Alternate to the previous branch interface NOTE If the present interface is fan 1 then it will go to the fan 6 interface 4 The power output rate line bar Touch the end tips to adjust by increments of 5 5 The right arrow button Alternate to the next branch interface NOTE If the present interface is fan 6 then it will go to the fan 1 interface 6 The back button Back to the main interface
Download Pdf Manuals
Related Search