CD Copy Station CD-RT=Standalone/4
Contents
1. f When the product exhibits a distinct change in performance this indicates a need for service 19 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shocks or other hazards 20 Safety check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to deter mine that the product is in proper operating condition 21 Heat The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat 38 1 Important Safety Instructions 2 GENERAL DESCRIPTION The CD RT Standalone 4 CD duplicator provides you with a quick and simple method of copying your original audio material in CD format at more than real time speeds using easily obtainable low cost CD R media with no auxiliary equipment or computer system required It it especially useful for duplicating material produced using the TEAC CD Writer series on CD R media The CD RT Standalone 4 can also be used to duplicate CD ROM material of which you own copyright or for which you have appropriate permission NOTE This product is designed to aid professional users in publishing small CD based circulations To copy and distribute CDs2. 2 All implied warranties or conditions including but not limited to war ranties or conditions of merchantability and fitness for a particular purpose hereby are excluded These warranty terms do not affect any statutory rights of consumers which were granted by the respective national laws TEAC Deutschland GmbH DSPD BahnstraBe 12 65205 Wiesbaden Erbenheim Germany Tel 49 0 611 71580 Fax 49 0 611 7158392 Internet www teac de Contact us by email www teac de dspd www eng contact e htm E Mail Kontakt www teac de dspd www ger contact d htm TEAC UK LIMITED DATA STORAGE PRODUCTS DIVISION 5 Marlin House The Croxely Centre Watford Herts WD1 8YA U K Tel 44 1 923 225235 Fax 44 1 0923 236290 Internet www teac co uk TEAC FRANCE S A 17 rue Alexis de Tocqueville CE 005 92182 ANTONY CEDEX France Tel 33 0 142370102 Fax 33 0 142376545 60 Warranty
3. e causes other than product defects including lack of technical skill competence or experience of the user Especially damages which may arise of incidential use respectively by improper ven tilation f damages caused by improper or incorrect installation of soft ware g periodic check ups h maintenance respectively repair of parts due to normal wear and tear i adoptions or adjustments to the product in order to conform to different national technical or safety standards of any country other than the one for which the product was originally designed and manufactured Who May Enforce the Warranty This warranty may be enforced only by the original retail purchaser What We Will Pay For We will pay all labor and material expenses for items covered by the warranty Payment of shipping and insurance charge is discussed in the next section of this warranty 58 Warranty How You Can Get Warranty Service 1 If your unit needs service during the warranty period please con tact the local authorized distributor for this product If you are un able to locate such a distributor please contact your TEAC facility at the address indicated below 2 After identifying the nearest authorized service station for this prod uct the product or any parts believed to be defective must be shipped freight and insurance prepaid to such service station together with a copy of this warranty certificate and a copy of your sales recei
4. 000hrs 4 Specification 55 5 TECHNICAL SUPPORT In case the TEAC CD RT Standalone 4 does not operate normally in the environment specified in this manual contact the representative from whom you purchased the drive or our nearest sales office to you Technical Service Depots Europe TEAC Deutschland GmbH ICP Division Germany Technical Support Tel 49 0 611 7158 654 Technical Support Fax 49 0 611 7158 666 Internet http www teac de support Contact us by email www teac de dspd www eng contact e htm E Mail Kontakt www teac de dspd www ger contact d htm TEAC UK LIMITED Uk DATA STORAGE PRODUCTS DIVISION 5 Marlin House The Croxely Centre Watford Herts WD1 8YA U K Technical Support Tel 44 1 923 225235 Technical Support Fax 44 1 923 236290 Internet http www teac co uk TEAC FRANCE S A France 17 rue Alexis de Tocqueville CE 005 92182 ANTONY CEDEX Tel 33 0 142370102 Fax 33 0 142376545 56 5 Technical Support WARRANTY Model Serial No CD RT Standalone 4 Owner s name ___ Address Dealer s name Date of purchase Dealer s address__ Warranty Period TEAC Deutschland GmbH hereinafter called TEAC warrants this prod uct against any defect in material and workmanship for one 1 year from the date of purchase by the original retail purchaser According to the following terms this TEAC product will be repaired without charge of labor and materials by the author
5. Follow Instructions All operating and use instructions should be followed 5 Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 6 Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards 7 Water and Moisture Do not use this product near water for example near bath rub wash bowl kitchen sink or laundry tab in a wet basement or near a swimming pool and the like 8 Accessories Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to persons and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory rec ommended by the manufacturer 9 A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn 36 1 Important Safety Instructions 10 Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to pro tect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the
6. button of the MASTER or the SLAVE drives to open the disc tray Place discs label side uppermost in the disc tray If a disc is placed into a tray upside down or off center an error message will appear on the display You can close the disc trays by pressing the eject button on the drive though many operations will close the disc trays automatically 2 3 3 Power down Before powering down the unit eject discs from all drives the eject mechanism requires power to work and so you will not be able to eject the discs once power is turned off NOTE Do not turn off the CD RT Standalone 4 while writing to the slave discs i e part of the way through a disc copy opera tion If you do the disc will be corrupt and unusable 2 3 4 Care of CD R media The Compact Disc medium is a robust medium and the disc can sur vive a good deal of physical abuse However there are precautions that you should take when handling CD R discs which are different to those you should take when handling ordinary CDs Avoid touching the recording non label side of a disc on which you will be recording Recording on a disc requires a cleaner surface than 2 General Description 43 I wal O Z iT playing back and fingerprints grease etc can cause errors in the re cording process CD R discs are more sensitive to the effects of heat than ordinary CDs It is important that they are not stored in a location where direct sun light will fa
7. damage to the product due to lightning and power line surges 15 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in the risk of fire or electric shock 16 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product Importan t Safety Instructions 37 ENGLISH 17 Servicing Do not attempt to service this product yourself as open ing or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 18 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the fol lowing conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the op erating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e If the product has been dropped or damaged in any way
8. have obtained the appropri ate permission from the copyright owner or the rightful licen sor your unauthorized recording reproduction or distribution thereof may result in severe civil and criminal penalties under copyright laws and international copyright treaties This procedure copies the material from the disc either an audio CD or a CD ROM in the MASTER drive to the CD Rs in the SLAVE drives You may find it useful to test the copy procedure before committing yourself to an actual copy however See 3 2 Test Write Mode for details NOTES Once a copy operation has started it cannot be stopped be fore the disc has been finalized The only way to stop a copy operation is to turn off the power to the unit However this will make the CD R disc useless for any purpose Do not use warped discs or discs with off center holes with the CD RT Standalone 4 While the copy operation is in progress make 3 Modes 45 T 2 mr T 46 sure that the CD RT Standalone 4 is not subjected to vibra tion or mechanical shocks Press the MODE key until the display appears as below the 8x may also read 4x 2x or Ix and indicates the speed at which the copy will be made see 3 6 Setting the Writing Speed below Mode select 1 Copy 8x Press the ENTER key Copy 8x Ready Place the source disc in the MASTER disc tray and a blank CD R disc in the SLAVE disc tray If you decide that you do not
9. product on a bed sofa rug or other similiar surface This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered on 11 Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or your local power company 12 Grounding or Polarization This product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug 13 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience re ceptacles and the point where they exit from the prod uct 14 Lightning For added protection for this product during a light ning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the cables system This will prevent
10. you have to own the copyright or the permission from the copyright owner or the rightful licensor Unless you own the copyright or have obtained the appropriate permission from the copyright owner or the rightful licensor your unauthorized recording re production or distribution thereof may result in severe civil and criminal penalties under copyright laws and international copy right treaties If you are uncertain about your rights contact your legal advisor Under no circumstances will TEAC Deutschland GmbH be responsible for any consequences of any illegal copying performed using the CD RT Standalone 4 Depending on the quality of the source CD audio CD CD R or CD ROM it is possible to copy material at up to eight times the real time rate selectable from the front panel making it convenient for rapid duplication of a number of identical discs etc Depending on the content of the source CD you may not be able to read it or to make a completely accurate copy of the source Making multiple copies of the same disc may degrade the sound quality NOTE Although the operation of the CD RT Standalone 4 is relatively straightforward we strongly suggest that you read this manual before starting operations There are a few factors affecting the production of CD R discs using the CD RT Standalone 4 which may not be immediately obvious 2 General Description 39 ENGLISH 2 1 Installing the CD RT Standalone 4 There are no co
11. TEAC CD Copy Station CD RT Standalone 4 Users Manual To ensure the smooth handling of your warranty please write the serial number of your unit into the box In the case of warranty you are expected to send it together with a copy of your invoice to your nearest TEAC sales representative Contents INTO DIC TION aapsratceanrannssetsaraeaapiaaitesaaeanenaaciaantanitannnanmcancennee 32 IMPORTANT SAFETY PRECAUTIONS iissssstsssrssractiaseasscsaccasaains 32 IMPORTANT for U K Customers cccecescessteessseeeesteeseseeeess 32 IMPORTANT for U S A Customers cccecetteeeeteeseteeeeeeeeseeees 33 FOr the Consumers int EUDE sisi aerate 33 STANDALONE OPERATION OF CD RT STAND ALONE 4 34 OPERATIONAIN P CMO DE vfer 35 1 IMPORTANT SAFETY INSTRUCTIONS cccccceseeeeeseeeneeees 36 2 GENERAL DESCRIPTION irisse e nee eere errereen re taani 39 2 1 Installing the CD RT Standalone 4 seces 40 2 2 Parts of the CD RT Standalone 4 00 eeeeeeeeeeeeneeeees 40 2 0 BASC OPTIONS eea T Sioe 43 Ob DISO CODY cE Erre E EEEE Ee EEEE SEEE RENEE 45 3 2 Test Write MOd ssiri anean aaen 47 3 3 Possible Problems When Copying or in Test Write Mode 48 JA Compare CDROM aea A 50 Belay AUICIOy AGO e iii ss cocaceeccsnenenesananseacansqcenceqesesecesqasenns 52 3 6 Setting the Writing Speed sesser 54 AL SPECIFICATION scccstiectctesscciiee bb cusceusbausbensbensponabunaiunaiunaiuchnutbbonts 55 p TECHNICAL SUP OA reete naea
12. disc tray try again with a different disc etc before attempting the copy operation again 3 Modes 49 ENGLISH 3 4 Compare CD ROM This mode is used for comparing CD ROM which has just been dupli cated using the copy mode It cannot be used for audio CDs Press the MODE key until the display shows the following Mode select 3 Compare CD ROM Compare CD ROM Ready 3 Make sure that the original disc is in the MASTER drive disc tray and the copy discs are in the SLAVE drives disc tray 2 Press ENTER 4 Press ENTER Comparing Pii 4 As the comparison process proceeds the percentage of the proc ess which has been completed is shown on the display Note that the comparison process is carried out quicker than recording or testing The time taken for comparison is independent on any speed settings made these only affect the recording speed 5 When the comparison has finished successfully the display shows D TEREN Match 50 3 Modes If there has been an error on the copying i e the two CD ROMs do not match or if they do not match in any other way the wrong pair of discs has been loaded the compare operation will stop at the point at which the mismatch was detected and the display will show Compare finished No match 3 4 1 Error conditions If no disc has been placed in either the MASTER or the SLAVE drives the display will show a no disc error message with the drive from which the disc is mi
13. ed in the CD copying and testing modes It has no effect on the compare operations 1 Press the MODE button until the display shows Mode select 5 Write speed Speed select 8x Write 3 Press the MODE key to cycle between eight times speed 8X quadruple speed 4X double speed 2X and real time 1 X mode 2 Press ENTER 4 Press ENTER to confirm the selection NOTE If you are in doubt what speed will work best pick real time first and experiment with the faster settings later Usually how ever you should be able to copy most discs at the 8x speed 54 3 Modes 4 SPECIFICATION 1 CD ROM CD 5325 32x SCSI Performance 32x read I 2 4 CD Writer TEAC CD R58S Performance 24x read 8x write 5 Speed 650MB approx 10 minutes 3 Drive performance Access time 150ms Transfer Rate 3 6MB s Buffer size 4MB 4 CD Compatibility CD DA CD l Video CD CD ROM XA CD Plus Enhanced CD Photo CD Recording mode Disk at once Track at once Multisession Incremental Packet writing Disc Loading Motorized Tray 5 Rear panel Power supply 230V 60Hz 3A Interface SCSI 2 6 Operating environment Place of operation Temperature 5 to 40 C Humidity 20 to 80 noncondensing Temperature 30 to 55 C Humidity 10 to 80 noncondensing Place of storage 7 Dimensions weight Dimensions WxHxD 189 x 443 x 461mm Weight 15 1 kg 8 Safety standards CE 9 Reliability MTBF 100
14. ized TEAC service stations by the authorized TEAC dealers and or their authorized service stations TEAC the authorized TEAC service stations the authorized TEAC dealers and or their authorized service stations may decide wether the defec tive product will be repaired or replaced as a whole or partially The TEAC dependancies the authorized TEAC service stations the au thorized TEAC dealers and or their authorized service stations will also honour this warranty in the other EC and EFTA member states based on the terms in this warranty conditions What is Covered and What is Not Covered Except as specified below this warranty covers any defects in materi als and workmanship of this product The following are not covered by the warranty 1 Damage to or deterioration of the external cabinet 2 Any unit that has been altered or on which the serial number has been defaced modified or removed Warranty 57 ENGLISH 3 Damage deterioration or malfunction resulting from a accident misuse abuse or neglect b failure to follow instructions supplied with the product c any shipment of the product Any damage arising of transporta tion is the liability of the freigth company Any damage arising of transportation and any implicit and explicit risks are the liability of the freigth company This is expressivly not a liability of TEAC d repair or attempted repair by anyone not authorized by TEAC to repair this product
15. k is reached in this mode and the ENTER key is pressed playback will start at the first track If the MODE key is pressed from the screen above the display changes Track 05 Play 2 Previous track 3 Modes 3 Modes Pressing the ENTER key will start playing the track before the cur rent track If the first track is currently being played and the EN TER key is pressed the last track will start playing Pressing the MODE key from the display shown above will change the display again Track 05 Play 3 Exit Press the ENTER key from this screen to exit the audio play mode and return to the main mode selection screen An appropriate er ror message is displayed if there is no disc in the drive no disc or if the disc is unreadable for any reason it is not a finalized disc or is wrongly inserted into the drive does not contain audio data etc Bad disc NOTE If the copied CD contains audio errors you will be able to hear them but no message will appear on the display If a copied CD contains audible errors you may want to consider rerecording at a lower speed which will almost certainly re duce the error rate 53 ENGLISH 3 6 Setting the Writing Speed The CD RT Standalone 4 SLAVE drives are capable of writing infor mation to a CD or CD ROM drive at normal IX double 2X four times 4X or eight times 8X normal speed The writing speed is set as described below Once the speed is selected it is us
16. ll on them and which is away from sources of heat such as radiators or heat generating electrical devices Always store CD R discs in their jewel cases to avoid dirt and dust accumulating on their surfaces When labeling CD R discs always use a soft felt tipped pen to write the information Never use a ballpoint or hard lipped pen as this may cause damage to the recorded side Dirty discs may be cleaned using a soft dry cloth and or a commerial CD cleaning fluid or ethyl alcohol Do not use thinner gasoline benzene or LP cleaning fluid as these will damage the disc If you are in any doubt as to the care and han dling of a CD R disc read the precautions supplied with the disc or contact the disc manufacturer directly 2 3 5 Discs recommended for use with the CD RT Standalone 4 The best results and the highest performance are ensured when using TEAC write once CD R media Your dealer will tell you the sources of those CD Rs 44 2 General Description 3 MODES The different modes available are Copy Test write Compare CD ROM Play audio Write speed selection l These are accessed by pressing the MODE key Details of these modes are given below When the required mode is shown on the top line of the display press the ENTER key to enter the mode When the word Exit appears on the display the ENTER key will halt the current operation 3 1 Disc Copy NOTE You should own the copyright or
17. n progress The indicator on this drive shows when the disc is being accessed In the Play audio mode see 3 5 Play Audio Track a prerecorded CD may be inserted into this drive and played back track by track The headphone jack and volume controls of this drive are operational in this mode only SLAVE drive The SLAVE drive holds the destination CD This must be a CD R disc The eject button is used to eject the slave disc when no operation is in progress The indicator on this drive shows when the disc is being accessed for reading or writing In the Play audio mode see 3 5 Play Audio Track an audio CD may be inserted into this drive and played back The headphone jack and volume controls of this drive are opera tional in this mode only NOTE If a disc is in a drive and cannot be removed by using the eject button you can insert a thin stiff wire such as the end of a paperclip into the hole on the front panel of the drive under the tray This will open the tray Power On LED The LED panel is lit after switching on the unit 42 2 General Description 2 3 Basic Operations 2 3 1 Power up procedure When the unit is powered up using the POWER switch it performs a self check operation and the screen shows the following TEAC Initializing If the self check is passed the display will show the first menu screen otherwise an error message will be displayed 2 3 2 Inserting discs Press the eject
18. nnections to be made to and from the CD RT Standalone 4 other than the power connection on the rear Panel as the unit is completely self contained 2 2 Parts of the CD RT Standalone 4 The power cord has to be plugged into a power supply that matches the voltage shown on the rear panel label The rear panel also offers two external SCSI connectors Fan N a P External SCSI not connected te D ni connector RoE Power supply The Rear Panel of the CD RT Standalone 4 40 2 General Description The following refer to front panel items only POWER switch Press this switch once to power on the unit and again to turn it off Display The 2 x 16 LCD display displays the menus and submenus available and also provides information on the status of the current operation as well as displaying error messages etc MODE key The MODE key is used to cycle through the different menus and op tions available to put the unit into the different modes as explained below 2 General Description 41 ENGLISH ENTER key The ENTER key is used to confirm the selection of menu items and options and also acts as a start key to start operations MASTER drive The MASTER drive is used to hold the source CD This may be a pre recorded audio CD or CD ROM which you have permission to copy or a CD R disc The eject button is used to eject the master disc when no operation is i
19. ode If the MASTER or SLAVE drives does not contain a disc or if the disc cannot be read by the drive it is upside down or badly positioned in the tray the display will show No disc If the SLAVE drive does not contain a recordable CD R disc or a CD R disc which has been previously partly recorded the display will show Bad disc The standard maximum length of an audio CD is set at 74 minutes However some commercial CDs are recorded with a running time a little longer than this If the master audio CD exceeds 74 minutes in length or the standard maximum amount of data 650 MB for a CD 48 3 Modes ROM the display will show Master Insuffi cient disc space The message above will also be shown if the slave disc is of a smaller capacity than the source disc In these instances it is impossible to copy from the master to the slave disc If the master disc is scratched damaged or unreadable for any reason the copy process will halt and the display will appear as below Error Master Bad disc If the slave disc is scratched damaged or otherwise unwritable the display will appear as below Error Slave Bad disc If the copy operation is attempted at too high a speed the display will show Buffer under run In the event of any of these errors being displayed pressing the MODE key will return to the main mode selection menu Correct the problem if possible replace the offending disc correctly in the
20. offers two outputs The connections between the CD RT Standalone 4 and the PCs controller s are made with two appropriete SCSI cables The soft ware package which is shipped with the unit makes several additional functional features available as for example the combining of copy con tents with the PC Please refer to the manual of the software package for further details Important Hint according the PC Mode When using the copy station in PC Mode the controls at the CD RT Standalone 4 are not allowed to be operated under any circumstances Important Please ensure the proper termination of the SCSI bus at the PC The SCSI IDs are factory preset and cannot be changed The upper SCSI connector makes the master drive SCSI ID I and the two CD recorders with the SCSI ID s 2 and 3 avail able The lower connector serves to control the two CD re corders with the SCSI ID s 4 and 5 Operation in PC Mode 35 ENGLISH 1 IMPORTANT SAFETY INSTRUCTIONS CAUTION Read all of these instructions Save these Instructions for later use Follow all warnings and instructions later on the audio equip ment 1 Read Instructions All the safety and operating instructions should be read before the product is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Head warnings All warnings on the product and in the operating instructions should be adhered to 4
21. pt showing the date of purchase Please ensure to fill out the warranty certificate correctly do not forget the serial number of the product TEAC reserves the right to refuse the guarantee service if the docu ments are missing or incomplete in the understanding of this terms ENGLISH If the necessary repairs are covered by the warranty and if you have sent the product or parts of it to the nearest authorized serv ice station the return freight and insurance charges will be prepaid Please do not return your unit to the TEAC factory without out prior authorization see also RMA form Limitations of Liability and Exclusion of Implied Warranties Unless considered unenforceable or unlawful1 under the applicable national law 1 TEAC s liability for any defective product is limited to repair or re placement of the product at TEAC s option and the option of au thorized service stations authorized dealers and their authorized service stations No one is authorized to assume any greater liabil ity on TEACs behalf TEAC shall not be liable for any damage to any other properties independant of their virtual or real nature espe cially there is no liability for any damage to any kind of software and or any kind of databases caused by TEAC products Furthermore TEAC is not liable for damages arising out of loss of use loss of revenue or profits or any other damages wether incidential con sequential or otherwise Warranty 59 N
22. r naear eaae etae meter AEAEE EELA oaet 56 Technical Service Depots Oe ees 56 WARE A NB is Gomera ne en ee ea oe 57 e Changes in specifications and features may be made with out notice or obligation e Copyright 2000 TEAC Deutschland GmbH All rights re served First Edition February 2000 e Company and product names provided herein are trade marks of their respective companies Contents 31 ENGLISH INTRODUCTION The stand alone CD Copy Station reproduces CD Rs without any PC connection software or adapter cards It is equipped with four TEAC SCSI Writers and a 32x SCSI CD ROM drive and so can copy CDs quickly and without any problems the data are simply read by the CD ROM So insert the master CD put the blank CDs into the re corders and start the burn procedure at the press of a button It could not be any easier IMPORTANT SAFETY PRECAUTIONS IMPORTANT for U K Customers DO NOT cut off the mains plug from this equipment If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point then obtain an appropriate safety approved extension fead or consult your dealer If nonetheless the mains plug is cut off remove the fuse and dispose the plug imme diately to avoid a possible shock hazard by inadvertent connection to the mains supply If this product is not provided with mains plug or one has to be fitted then follow the instruc
23. se harmful interference to radio communications Operation of this equipment in a residental area is likely to cause harmful interference in which case the user will be required to correct the inter ference at his own expense CAUTION Changes or modifications to this equipment not expressly approved by TEAC Deutschland GmbH for compliance could void the users authority to operate this equipment For the Consumers in Europe WARNING This is a Class A product in a domestic environment This product may cause radio interference in which case the user may be required to take adequate measures Important Safety Precautions 33 ENGLISH STANDALONE OPERATION OF CD RT STAND ALONE 4 34 Important Hint according Standalone Operation To avoid malfunction the CD RT Standalone 4 can not be connected to a PC while it is operated in standalone mode Please disconnect the SCSI cables between the copy sta tion and PC before the CD RT Standalone 4 is switched on To ensure errorfree operation both SCSI termina tors which were shipped with the unit have to be plugged into the connectors on the backside of the unit Standalone Operation of CD RT Standalone 4 OPERATION IN PC MODE To operate the CD RT Standalone 4 with a personal computer the ex ternal SCSI terminators have to be disconnected To operate the CD RT Standalone 4 the PC must be equipped with two separate SCSI controllers or with the original TEAC SCSI controller which
24. ssing If the master or slave disc is damaged scratched or is otherwise un readable the display shows Disc Err with either Master or Slave as appropriate If the discs are different the display shows a no match message The compare operation can be stopped at any time by pressing and holding down the MODE key and pressing the ENTER key An error message will be displayed and you should use the MODE key to return to the mode selection 3 Modes 51 ENGLISH 3 5 Play Audio Track Since it is impossible to make a bit by bit comparison of audio CDs this function is provided for you to audition a CD copy using a pair of headphones connected to the MASTER or SLAVE drive headphone jack Any standard headphones with a 3 5 mm stereo jack may be used The volume is adjusted using the drive s volume control turn to the right to increase the volume and to the left to decrease the volume 1 Press the MODE key until the display shows the following Mode select 4 Play audio 2 Press ENTER 3 52 Drive select Master Use the MODE key to toggle between Master and Slave with a third option being to exit Exit the play audio mode Press the ENTER key to confirm the selection Track 01 Play 1 Next track i After the ENTER key has been pressed a Please wait message is briefly shown and track 1 will start playing Pressing ENTER again will jump to the next track and start play back If the last trac
25. ted rate between the master and the slave discs 1 Press the MODE key until the display shows Mode select 2 Test write 8x Test write 8x Ready 3 Insert the disc into the disc tray original in the MASTER and the blank CD Rs in the SLAVE drives and press the ENTER key The test operation continues in exactly the same way as the copy op eration described above Test Writing G 36 2 Press ENTER 3 Modes 47 The display shows the same messages under the same circum stances except that the word copy is replaced by the word Test in all these messages At the end of the test procedure the CD RT Standalone 4 does not simulate the writing of the TOC the finalization process and displays Test write Finished NOTE There is one other important difference between test write mode and copy mode You can interrupt the test write mode part of the way through the operation without affecting the slave CD R media If you interrupt a copy procedure part of the way through the operation the CD R becomes unusable To interrupt the test write operation press and hold down the MODE key The display will show Exit When this is displayed press the ENTER key This cancels the test write process and the display returns to the initial status screen If you press the MODE key while Exit is shown on the display the dis play returns to the test write display screen 3 3 Possible Problems When Copying or in Test Write M
26. tions given below IMPORTANT The wires in this mains lead are coloured in accordance with the following code GREEN AND YELLOW EARTH BLUE NEUTRAL BROWN LIVE WARNING This apparatus must be earthed As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows 32 Introduction The wire which is coloured GREEN and YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured GREEN or GREEN and YELLOW The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED When replacing the fuse only a correctly rated approved type should be used and be sure to re fit the fuse cover IF IN DOUBT CONSULT AN APPROVED ELECTRICIAN IMPORTANT for U S A Customers This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ ment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cau
27. want to make a copy at this stage press the MODE key to return to the mode selection menu Press ENTER to start the copy operation If you have not closed the disc tray s they will close automatically and the CD RT Standalone 4 will start to read the master disc and check the slave discs The words Please wait will appear on the screen while the discs are checked lf the CD RT Standalone 4 does not detect any potential problems with the discs copying will start and the percentage which has been written is shown on the display along with an animated dis play to indicate that writing is currently in progress Writing Pia 7 After the percentage counter reaches 99 the CD RT Standalone 4 writes the TOC to the slave disc and the display shows Writing LT Finalizing 3 Modes This operation may take a minute or more depending on the com plexity of the disc 6 When the finalization operation is complete the display will show Copy Finished You can now remove the discs using the eject buttons on the drives these are disabled while the copy process is taking place Alter natively you can compare the original with the copy see 3 4 Com pare CD ROM ia ar Lu 3 2 Test Write Mode The test operation is functionally similar to the write operation except that the writing of data to the slave disc is simulated This is useful to make sure that data can be transferred at the selec
Download Pdf Manuals
Related Search