Are You suprised ? - Crypto Electronics
Contents
1. keyboard 11 RJ11 LINE jack input to connect the telephone line 12 Ringer HI LO Adjust HI LO volume of ringer 13 Volume HI LO Adjust HI LO volume of speakerphone 14 Speakerphone Speakerphone button activate de activate 15 Indicates that the phone is in lock barred mode 16 REDIAL Execute a selected call 17 FLASH Terminate a call select another line 18 HOLD Music on hold Page 5 The battery compartment is located at the bottom side of the unit The unit uses 2 AA 1 5V type batteries To install the batteries correctly see the polarity direction which is indicated in the battery compartment ATTENTION In order not to lose all the various information and settings which have been stored in the T110 during the replacement of batteries the telephone line must stay connected to the T110 INSTALLATION Place the batteries into the battery compartment according to their proper polarity Connect the telephone line into the LINE input of the phone Once the batteries have been properly installed the LCD screen will indicate the total number of new calls NEW the year and date Initially the time and date that will appear on screen will not be correct When the first incoming call is received the time and date of the T110 will automatically adjust if the telecom provider provides this service You will only need to adjust the year DESCRIPTION OF FUNCTIONS 1 Incoming call indication When re2. 1110 TELEPHONE WITH CALLER IDENTIFICATION User s manual crypto Contents INTRODUCTION ui a da FUNCTIONAL LCD SCREEN 4 1 SEI aan iia indecisa 8 02 m gt D be Possible problems and 10 Page 2 INTRODUCTION The T110 telephone by Crypto is your loyal household friend because you can see who is calling you when you are home or you can see who has called you and how many times with time and date when you where absent from the house This way you are easily notified if friends or relatives call Ofcourse features such as Low High speakerphone or ringing Low High music on hold Pulse or Tone dialing and fast callback are provided as standard features on the phone The T110 is very helpful at your office as well In addition to the above capabilities it has excellent compatibility with all PBX phone centers with the FLASH and HOLD buttons FUNCTIONAL CHARACTERISTICS Crypto T110 provides Automatic system detection FSK DTMF ETSI Liquid Crystal LCD screen Indication for total incoming calls new and repeated calls with time and date Distinction of new and repeated calls Stores 50 incoming calls which you can review delete and callback Stores 9 outgoing calls Pre dial function o NPD U PWN Hands f
3. ceiving an incoming call and after the first ring the number of the other party will appear on the screen If a name has previously been appointed then the number will appear together with the name If the other party s number is withheld the message P will appear 2 Review incoming calls The T110 can store 50 incoming calls By pressing UP or DOWN we can see all the consecutive incoming calls At the same time on the top right corner we can see the consecutive calls by incoming IN by new NEW and by repeated REP calls 3 Delete incoming calls e Press UP and DOWN until we find the calls that we want to delete and press DEL e To erase all incoming calls press DEL for seconds DELis generally used as an escape key the known ESC key on every computer while being in a certain menu or as an erasing tool 4 Store and callback outgoing calls CRYPTO T110 can store the last 9 outgoing calls indicating at the same time the number and duration of the call which you can afterwards see by pressing the OUT key For each one of those calls you can callback by pressing the REDIAL key Page 6 5 Callback an incoming outgoing number e In standby mode press UP or DOWN for incoming calls and OUT for outgoing calls in order to find the number that we are looking for e Press REDIAL and the call will be placed automatically e Finally we can either use the speakerphone by pressing the button
4. exit from the menu 4 SET 4 Flash Adjust the Flash time To change the Flash time e Press SET e Press UP or DOWN to find the Flash selection and press SET again e Select the desired flash time by using the UP and DOWN keys e Press DEL to exit from the menu Page 7 5 SET 5 Auto IP This function does not work 6 SET 6 P 7 Pulse Tone dialing selection e Press SET e Press UP or DOWN to find the P 7 selection and press SET again e Select Pulse or Tone by using the UP and DOWN keys e Press DEL to exit from the menu 7 SET 7 ALAr Parallel lines barring steel dialing By activating this feature all units using the same parallel line cannot make phone calls e Press SET e Press UP or DOWN to find the ALAr selection and press SET again e Select ALAr ON or ALAr OFF by using the UP and DOWN keys e Press DEL to exit from the menu For the T110 to properly function please pay attention to the following points e Do not expose the LCD screen to direct sunlight for a long period of time e This unit accepts calls based on the FSK or DTMF system if the first incoming call is based on the FSK system the only way to change to DTMF and vice versa is to press the button twice Possible problems and solutions Problem Solution There is no dial tone after lifting the handset hear the ringing melody Check that the telephone cable has been steadily plugged into both the wall and t
5. he T110 Check to see if the telephone line has any problem Check to see that the head of the cable is properly connected to the cable There are possibly too many communication devices connected to the same line i e other phones or modems The LCD screen is dim or dark Check to see that the batteries have been properly installed proper polarity Check that the batteries have enough power to operate The caller identification system does not work Check that this service is activated by the telecom provider For caller ID to properly function you should answer the phone no sooner than 2 rings Check to see which system FSK or DTMF the telecom provider is using and adjust the unit accordingly by pressing twice Thetechnical specifications and accessories of the T110 are subject to change without prior notice
6. or pick up the handset 6 HOLD Press HOLD to put the other party on hold with music Return to normal talking mode by pressing HOLD again MENU FUNCTIONS 1 SET 1 Date Setting the time day month and year e To set the date time day month and year from the menu press SET and UP until we find DATE press SET again e Make the appropriate settings by using the UP and DOWN keys and SET to confirm and move to the next setting e Press DEL to exit from the menu 2 SET 2 CODE With this feature you can input your local are code prefix so that during incoming calls coming from the same area the T110 filters the area code 1 01 and does not store it in the memory so that we can callback this number without the 1 01 Note This feature can be used only in countries where this type of service is offered Press SET and with UP or DOWN find the CODE selection and press SET again e Enter the area code with the UP and DOWN keys and press SET to confirm each number and to move on to the next number e Press DEL to exit from the menu 3 SET 3 Lcode You can enter up to 5 digit Lcode To use this feature select an incoming call and press REDIAL 2 times and the 5 digit code that you have inserted will be dialed out first before the number Press SET e Press UP or DOWN to find the Lcode selection and press SET again e Enter the number with the UP and DOWN keys and press SET to move on to the next number e Press DEL to
7. ree speakerphone with Hi Low volume switch 9 Hi Low Ringer volume switch 10 Tone amp Pulse selectable switch 11 Music on Hold 12 Real time display date time day Page 3 LCD SCREEN INDICATIONS All indications M D REF OUT 88 3888888888 Explanation of indications IN Appears during an incoming call or while reviewing an incoming call OUT Appears when reviewing outgoing calls NEW Appears during a new incoming call or an unanswered incoming call REP Appears when the same incoming call number has called repeatedly Appears when phone has been locked bared Lock Date month day time and year P When receiving an incoming call and the number has been withheld from the subscriber Page 4 THE KEYBOARD AND THE CONNECTION INPUTS 1817 16 1 Handset Handset 2 Switch Lift handset to make or answer a call place handset back on base to end a call 3 Hook When placing the T110 on wall position turn hook around and place in the same position in order for handset to be placed properly on base 4 LCD LCD screen with various indications 5 UP To review caller ID calls from oldest to newest menu scroll 6 DOWN To review caller ID calls from newest to oldest menu scroll 7 DEL To erase escape from menu 8 OUT Review outgoing calls 9 SET To enter into menu mode 10 0 9 A Z Alphanumeric
Download Pdf Manuals
Related Search