MaxiiPowerTM VI2216LT User`s Manual
Contents
1. 2013 Vigitron Inc All Rights Reserved Common issues that prevent a successful connection are not having the USB driver installed incorrect port selection or not powering up the Midspan 16 Warning Upgrading firmware is not part of the normal operating procedure It should only be performed at the recommendation of the manufacturer by skilled personnel Improper upgrading will affect equipment performance and may result in rendering the equipment inoperative Ds VIGITRON High Power PoE Midspan System Configuration Multiple Port Configuration System View Port Configuration su Midspan Connection Connection Status E al eme 2013 Vigitron Inc All Rights Reserved Figure 4 Firmware Window 17 Firmware File A new unit has all the necessary programing and does not need this step To change the firmware of the Midspan you will need a file that contains the new firmware The location of the file containing the new firmware is displayed in this box Browse The file browse dialog box will be opened to select the firmware file to be used Download The image file that was selected using the Load command will be downloaded to the Midspan and replaced the current firmware Save Config This button saves the current running configuration to the internal memory of the Midspan Saving the configuration will prevent the loss of the individual port and power s2. 3AF AT 7 Port2 Violation Type None F Port3 Max Power 0 37 15 4 Port4 Power Inrush Control 802 3af F Pot5 Disable Enable E Force Power Midspan Connection Connection Status Port Selection SNMP not Activated C coina come 2013 Vigitron Inc All Rights Reserved Figure 6 Multiple Port Configuration Window Different PoE devices may respond to differences in detection pulses If your device does not turn on try changing this setting Choose the detection type to be used for selected ports matching it to the camera requirements Most cameras will work in the default position None for bypassing detection 2 point for 2 point detection 4 point for 4 point detection 4 point legacy for 4 point followed by legacy 2 point legacy for 2 point followed by legacy Legacy for legacy detection only This option will be considered the next time a detection is performed on a port This will not affect ports currently in a power delivering state To apply a change of the detection type disable and then enable the port 22 1 13 2 Classification 1 13 3 Violation Type 1 13 4 Max Power 1 13 5 Power Inrush Control 1 13 6 Disable 1 13 7 Enable 1 13 8 Force Power 1 13 9 Select All 1 13 10 Apply Choose the classification type for selected ports e Bypass
3. Legacy option will be considered the next time a detection is performed on a port This will not affect ports currently in a power delivering state To apply a change of the detection type disable and then enable the port 26 1 15 4 Classification 1 15 5 Power Inrush 1 15 6 Port Priority 1 15 7 Violation Type 1 15 8 Max Power 1 15 9 Disable 1 15 10 Enable 1 15 11 Force Power 1 15 12 Apply Selects the PD classification type to be used e Bypass for ignoring classification e 3AF AT for IEEE 802 3af at classification signature Selects the Power Inrush mode of the port e Normal for IEEE 802 3af mode e High Inrush for legacy devices which require more than 15 4W For the port to deliver more than 15 4W appropriately the ILIM ICUT value needs to be selected and classification needs to be bypassed e Pre 802 3at for devices supporting 802 3at For the port to deliver more than 15 4W appropriately the ILIM ICUT value to be selected Port Priority is used in situations where the total power requested by all connected devices may exceed the total power available from the Midspan By entering a value between 0 to 3 the user can give a higher priority to deliver power to some ports Less critical ports can be set with a lower priority Ports with the priority set to 3 have the highest priority and 0 is the lowest Selects the violation type to be used by the port during
4. individually selected This button must be clicked to load the user selected configuration onto the selected ports 23 The System View window enables viewing the status of all ports on a single screen High Power PoE Midspan Fimware System Configuration Multiple Port Configuration Port Configuration SNMP Power Available W 300 00 Power Allocated to active ports W 34 90 Power Delivering W 34 90 Power ONA N A Zw N A F S 2 a 5 N A N A N A N A Midspan Connection Connect Disconnect Figure 7 System View Window Connection Status Port Selection comso 2013 Vigitron Inc All Rights Reserved 24 1 14 1 Poll 1 14 2 Power Available 1 14 3 Power Allocated to Active Ports 1 14 4 Power Delivering 1 14 5 Port 1 14 6 Port Status 1 14 7 Port Power If the poll box is checked it will enable continuous refreshing of the parameters This box shows the Midspan total available power The total power allocated by the ports currently delivering power is displayed in this box The allocated power varies based on the selected Power Management Mode Shows the total power delivered on all active ports This displays the port numbers This shows the port status The status is color coded as following for easy identification e Green Delivering e Blue Searching e Gray
5. Port 2 Y Port 3 Y Port 4 Y Port 5 v Y Y Port 6 Port 7 Port 8 SS Y A Kl Ki Si e Checkal Gearan Fimware System Configuration Mukiple Port Configuration System View Port Configuration SNMP Messages SNMP Activated SNMP Deactivated Midspan description Used in SNMP messages Comm ERROR Vi2216LT Port Idle Port Powered Port Disabled Port Forced Pwr El Audible Waming Port Power Req Auto Reconnect Port Fault 7 Visual Waming Fault Codes Code 1 MPS Absent Code 2 Short Stop SNMP Code 3 Overload Code 4 Power Denied Code 5 Thermal Shutdown Code 6 Startup Failure Code 7 Classification Failure Midspan Connection Connect Disconnect Figure 9 SNMP Connection Status Port Selection SNMP not Activated 2013 Vigitron Inc All Rights Reserved An SNMP trap program is needed to receive and view the SNMP messages sent by the Midspan GUI Many of these programs can be downloaded from the internet for free The trap program can be running on the same computer as the Midspan GUI or on a separate computer as long as it is connected to the same network All of the Midspan SNMP messages are sent UDP to port 162 SNMP messages will be enabled on each port by checking the corresponding box All 16 boxes are checked by default 30 1 1
6. delivering state e None for bypassing violation checking e Class Based for limiting power based on the classification results If classification is bypassed then Class 0 will be used in Normal Mode and ILIM ICUT values in High power mode e User Defined for limiting power based on user defined value Enter the user defined power value This value can only be changed or used if the Violation Type is set to User Defined This button disables the port Buttons Disable Enable and Force Power are mutually exclusive This button enables the port Buttons Disable Enable and Force Power are mutually exclusive This button forces the port to output power This will bypass detection classification and power management checks No violation will be honored Buttons Disable Enable and Force Power are mutually exclusive Applies the user selected configuration onto the selected port 27 1 16 1 Port Status 1 16 2 Status 1 16 3 Class Error Value 1 16 4 Remote PD Type 1 16 5 Voltage 1 16 6 Current 1 16 7 Power 1 16 8 Temperature 1 17 1 Statistics 1 17 2 Overload Counter 1 17 3 Short Counter 1 17 4 Power Denied Counter 1 17 5 Invalid Detection Counter 1 17 6 Reset Statistics Check to enable polling of port Uncheck to disable polling This shows the port status The status is color coded for easy identificat
7. lt VIGITRON MaxiiPower VI2216LT User s Manual High Power Pot Midspan UTP Version 1 0 Updated 12 17 2013 O 2014 Vigitron Inc All rights reserved All brand and product names are trademarks or registered trademarks of their respective companies Vi2216LT Series Ethernet Midspan Installation Manual Important Safety Warning Read and keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Install in accordance with the manufacturer s instructions This installation should be made by a qualified service person and should conform to all local codes DO NOT bundle UTP or UTP signals in the same conduit as high voltage wiring To reduce the risk of fire or electrical shock do not expose these products to rain moisture dripping or splashing No objects filled with liquids such as vases shall be placed on Vigitron equipment DO NOT install the unit in a place where the operating ambient temperature exceeds 75 C Make sure that the external power supply output voltage is in the recommended range Do not install near any heat sources such as radiators heat registers stoves or other apparatus including DVRs that produce heat Protect the power cord from being walked on or pinched particularly at power source convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manuf
8. provides port status as the following e Off The port is off and no power is provided e On PoE power is on and is powering a valid PD e Slow Blinking The port does not have enough power for the load e Fast Blinking It warns that the connected PD is shorted or over current 1 10 GUI System Recommended Operating system Windows XP Vista Windows 7 and Windows 8 Requirements Microsoft NET Framework 4 is required to be installed on the host computer Port Communication USB port 12 Important Note By running the GUI software you are accepting all terms and conditions of using this software as noted in Appendix A The following section will guide you on how to use the High Power PoE Midspan GUI and connect the host computer to the Midspan through a USB cable VIGITRON High Power PoE Midspan Fimware System Configuration Multiple Port Configuration System Ven Port Corfiguration SNMP Midspan Connection i SNMP not Activated GER 2013 Vigtron Inc Al Rights Reserved Your computer may not update the USB port driver automatically You may need to update the driver manually as follows A Window XP Go to System property gt Hardware gt Device manager gt USB Serial converter and update driver B Window Vista Window 7 and Windows 8 Go to System property gt Device manager gt USB Serial converter and update driver A USB cable is provided to connect the computer to
9. the Midspan After connecting the Midspan to the host computer and the USB driver is installed run the GUI executable file xxxxx exe on the PC The Midspan GUI requires Microsoft NET Framework 4 installed on the host computer If you are running the GUI for the first time on a host computer with Windows XP you may need to visit the Microsoft website to download and install Microsoft NET Framework 4 13 When the GUI is first installed a username and password must be entered before clicking the Submit button The login information is chosen by the user and must be between 4 to 12 characters long To change the username and password you must login first The Submit button will now read Change Username and Password At this point you can enter in a new user name and password and then click Change Username and Password to update the login information lt VIGITRON High Power PoE Midspan System Configuration Mukiple Port Configuration System Ven Port Configuration SNMP Login Login Successful Usemame 4 12 Characters Password 4 12 Characters Change Usemame and Password Midspan Connection SNMP not Activated 2013 Vigitron Inc All Rights Reserved 14 Under Port Selection dick the down arrow in the drop down box The GUI will display all the available COM ports present on the PC The example below shows three ports avai
10. 9 3 Check All Button 1 19 4 Clear All Button 1 19 5 Midspan Description 1 19 6 Visual Warning 1 19 7 Audible Warning 1 19 8 Auto Reconnect 1 19 9 SNMP Message Descriptions Check All Button By clicking the Check All button every port will be enabled Clear All Button Clicking this button will disable all ports Midspan Description This box is used to customize the SNMP messages sent If multiple devices are being monitored by a SNMP trap program a Midspan description will differentiate the Midspan SNMP messages from other devices The description can be a maximum of 38 characters long Visual Warning When this box is checked and the GUI is minimized there will be a visual warning on the host computer after the SNMP message has been sent The number of messages sent since the GUI has been minimized will also be displayed Expanding the GUI will close the visual warning By default this box is checked Audible Warning If this box is checked and the GUI is minimized there will be an audible warning after an SNMP message has been sent The host computer must have speakers to play the warning Expanding the GUI will silence the warning By default this box is unchecked Auto Reconnect If the Auto Reconnect feature is enabled and communication between the GUI and computer is lost the GUI will attempt to re establish the connection every 15 seconds This feature is enabled by default SNMP Activated Thi
11. Disabled e Yellow Requesting Power e Orange Test mode e Red Fault The power currently being delivered by the port is displayed If the port is not in Delivering mode it will show N A 25 1 15 1 Port Configuration 1 15 2 Port 1 15 3 Detection Type The Port Configuration window enables the ability to configure a single port and view its status e VIGITRON Fimware System Configuration Multiple Port Configuration System View Port Configuration Port Configuration Port Detection Type Classification Power Inrush Control Port Priority Port Status Poll Status E Status Class Error Val Remote PD Type Voltage Current Violation Type None Power Temperature Max Power 0 37 Statistics Overload Counter OL Tata Power Alocated Power Denied Invalid Detection Midspan Connection Connect Disconnect Connection Status Port Selection eaea er 2013 Vigitron Inc All Rights Reserved SNMP not Activated Figure 8 Port Configuration Selects the port number to be changed or status viewed Selects the PD detection type to be used e None for bypassing detection e 2 point for 2 point detection e 4 point for 4 point detection e 4 pointtlegacy for 4 point followed by legacy e 2 pointtlegacy for 2 point followed by legacy e Legacy for legacy detection only The
12. Port 1 v Es Port 1 15 4 Port 9 37 Status R i 7 7 Detection Type 4 Point only v Por 2 3 Pot 10 3 Class Eror Val 1 Por 3 37 Por 11 27 Classification Bypass e Remote PD Type PD None Pot4 37 Port 12 37 Power Inrush Control High Inrush v Voltage DV SE SEET Port Priority D X Curent 00 mA Pot 6 37 Pot 14 37 jolation Type User Defined 7 degt cd Port 7 37 Port 15 37 Temperati 275C e Max Power 0 37 154 ons raced Pot 8 37 Pot 16 37 Ports not set to User Defined will be Statistics displayed in red text and by default will be set to the maximum wattage Enable Overload Counter 0 S Total Power Allocated Short Counter 0 Apply 570 4 Watts Power Denied 0 Berenice Eee Invalid Detection 2 270 4 Watts Ft Ss The power allocated to each individual port is displayed in these boxes The power for each port is added then displayed This box will display the total power available 300 minus the total power allocated to all ports Clicking this button will update all the port power allocated information 29 1 19 1 How to Receive SNMP Messages 1 19 2 Enable SNMP Ports This GUI can monitor and send SNMP messages for a Vi2216LT Midspan The Midspan must remain connected to the host computer While the SNMP is running the GUI will remain on the SNMP tab To use other features of the GUI you must first stop the SNMP lt VIGITRON High Power PoE Midspan Midspan SNMP setup Enable SNMP Ports Y Port 1 Y
13. acturer Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as when a power supply cord or plug is damaged liquid has been spilled objects have fallen inside the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped The main plug is used as the disconnected device and shall remain readily operable CAUTION TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL A WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus A WARNING This apparatus is a Class product This product must be connected to a mains socket outlet thru an AC to DC Power supply A WARNING The mains plug is used as the disconnect device and shall remain readily operable Contents e EAR e s 9 ES Mee EE 9 TELDE tad 9 Hardware Sp cifications E 11 13 Electrica tits 11 LA Environmental iii AA Eine 11 1 5 Mechanical 4 22 A tots 11 1 6 Regulatorv Gertifications dicas 11 1 7 Included Accessories 11 NES A ee E a ac Rs A es Ee 12 asan ABADINO on Sree E A a d
14. air by anyone other than Vigitron Inc or an approved agent will void this warranty Vigitron Inc shall not under any circumstances be liable to any person for any incidental indirect or consequential damages including damages resulting from use or malfunction of the product loss of profits or revenues or costs of replacement goods The maximum liability of Vigitron Inc under this warranty is limited to the original purchase price of the product only 36 Vigitron Inc 7810 Trade Street Suite 100 San Diego CA 92121 support vigitron com Tel 858 484 5209 Fax 858 484 1205 www vigitron com 37
15. any PoE from the switch 33 1 20 Software Acceptance Terms and Conditions ACKNOWLEDGMENT BY INSTALLING THE SOFTWARE YOU ACKNOWLEDGE THAT YOU HAVE READ AND UNDERSTAND THE FOREGOING AND THAT YOU AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN THE PARTIES AND SUPERSEDES ALL PROPOSED OR PRIOR AGREEMENTS ORAL OR WRITTEN AND ANY OTHER COMMUNICATIONS BETWEEN THE PARTIES RELATING TO THE LICENSE DESCRIBED HEREIN GRANT OF LICENSE License for software use is hereby granted to user only provided that the purchase has been made from an authorized Vigitron dealer or hereby authorized by Vigitron License is not transferable and is limited to usage only No permission is hereby given or granted to make any change modifications and is restricted only for its intended usage Operation or usage other than described will considered as a violation of intended use DISCLAIMER OF WARRANTY Software is provided As Is with all faults To the extent permitted by law Vigitron its dealers distributors and other appointed agencies hereby disclaim all warranties whether expressed or implied including and without limitations warranties that the product is free of defects merchantability and fit for a particular purpose and non infringing You agree to bear the entire risk as to selection the proper for your purpose and as to the quality and per
16. d This value is about 8mA Code 2 Short This code is sent when the port senses a shorted connection and is automatically powered down to prevent an unsafe situation Code 3 Overload An Overload fault code is sent when the power used by a connected device exceeds typical operation Code 4 Power Denied The port did not power up due to power availability or port priority Code 5 Thermal Shutdown The port automatically shuts down to prevent damage from excessive heat Code 6 Startup Failure An error occurred in the startup procedure Code 7 Classification Failure An error occurred in determining the classification 32 The Vi2216LT can provide up to 37W on multiple ports As long as the 300W total power budget is not exceeded it is possible to supply up to 74W to a device This can be accomplished using the Vi0015 cable which combines the power of two ports while maintaining the standard wiring configuration The Vi0015 has two color coded cables They are black and blue The black cable carries only power The blue cable carries power and data To connect the Midspan to the switch use the port that is connected to the blue cable to connect the partner port to the switch Using the Vi0015 cable with the Vi2216LT up to 5 cameras devices that require 60W can be powered Remember when using either any of our Midspans or combination Midspan Extenders with a PoE switch it is recommended you turn off
17. d user defined limit is budgeted o If violation type is None then the budgeted power is based on port mode For Normal Mode the power budgeted is 16 2W For High Power Mode 802 3at Class 4 the power budgeted is based on ILIM ICUT selected value o For ILIM ICUT 504 465 mA the power budgeted is 22 5W o For ILIM ICUT 563 545 mA the power budgeted is 26 5W o For ILIM ICUT 850 625 mA the power budgeted is 31 6W o For ILIM ICUT 850 725 mA the power budgeted is 37 0W These limits will help to provide the necessary power for your system and prevents run away shorting and potential damage from occurring Static wo Priority Same as above except the port priority of the port is ignored Static wo Priority Power is budgeted statically based on selected violation type o If violation type is Class Based then the maximum permissible power for that class is budgeted o If violation type is User Defined then the configured user defined limit is budgeted o If violation type is None then the budgeted power is based on port mode For Normal Mode the power budgeted is 16 2W For High Power Mode the power budgeted is based on ILIM ICUT selected value o For ILIM ICUT 504 465 mA the power budgeted is 22 5W o For ILIM ICUT 563 545 mA the power budgeted is 26 5W o For ILIM ICUT 850 625 mA the power budgeted is 31 6W o For ILIM ICUT 850 725 mA the power budgeted i
18. ettings selected by the user The Midspan can be switched off and on without losing the configuration Command Progress This bar will display the progress of commands 18 The System Configuration window provides access to global configurations settings and status view of major parameters lt VIGITRON Multiple Port Configuration System View Pet Configuration SNMP Power Management Maximum Power Available Watts Power Management Mode Dynamic w Priority SW Version ILIM Range ICUT dech 850mA 1 1A 745mA MaxPorts 16 Power Available Watts Power Allocated Watts Please click Query button to refresh configuration Midspan Connection Connection Status Connect Connected Figure 5 System Configuration Window 19 1 11 1 Power These settings will help you match the power requirements of your system to the Management power output of the Midspan Power Management can be used in the following modes None Indicates power management will not be performed by the firmware User needs to power up the ports manually Static w Priority Power is budgeted statically based on selected violation type located under the Multiple Port Configuration or Port Configuration tabs o If violation type is Class Based then the maximum permissible power for that class is budgeted o If violation type is User Defined then the configure
19. for ignoring classification e 8 3AF AT for IEEE 802 3af at classification signature Choose the violation type for selected ports during delivering state e None for bypassing violation checking e Class Based for limiting power based on the classification results If classification is bypassed then Class 0 will be used in Normal Mode and ILIM ICUT values in high power mode e User Defined for limiting power based on user defined value Choose the user defined power value This value is used if the Violation Type is User Defined Choose the Power Inrush Control mode of selected port e Normal for IEEE 802 3af mode e High Inrush for legacy devices which require more than 15 4W For the port to deliver more than 15 4W appropriately the ILIM ICUT value needs to be selected and classification needs to be bypassed e Pre 802 3at for devices supporting 802 3at Use this mode to deliver more than 15 4W Appropriate ILIM ICUT value should be selected Check this box to disable selected ports Check boxes Disable Enable and Force Power are mutually exclusive Checking this box will enable selected ports Check this box to force the selected port to Power On This will bypass detection classification and power management steps and no violation will be honored Check Select All to select all ports Otherwise each port number must be
20. formance of the product LIMITATION OF LIABILITY Except as required by law Vigitron and its distributors directors licensors contributors and agents and all associated in with Vigitron in connection with the said software will not be liable for any damages arising out of or in any way relating to this product and or agreement the inability arising out of or in any way relating to this agreement or the use of the product and those products associated with said use of products including limitation damages for loss of physical property goodwill work stoppage lost profits loss of data and computer failure or malfunction Even if advised as the potential from such loss or damage regardless of the theory applied of contract tort or otherwise which claims are based Vigitron its associates and all others collective liability will be limited to the cost of the product itself 34 ARBITRATION Any disagreement between the parties relating to any interpretation construction performance or breach of this Agreement shall be settled by arbitration to be held in San Diego Country California in accordance with the laws of the State of California in accordance with the rules then in effect of the American Arbitration Association The arbitrator may grant injunctions or other relief in such dispute or controversy The decision of the arbitrator shall be final conclusive and binding on the parties to the arbitration Judgment may be entered on
21. ge Br Se nn NEEN E 25 T145 TEE 25 1 14 6 Port asian A AA A IL In Dee 25 VTA PORO EE 25 Port Config ration WindowW a taa Si bs 26 TiS Port CONABIO ias 26 1 15 21 Aa E O O ba eee eee WS T eae Sie 26 1 15 3 Detecti n Typen 22 A ee Gente encanta ete ited ents 26 115 4 Classification ricer srl RE 27 SS O O i lar biaai ia aet matinaa 27 LISO eg e ele 27 LAS 7 Violation Ty Pesca EE 27 ERA UE e 27 EK GREEN ER EN NEE 27 1 15 11 Forc amp POWER a ae ae 27 TEABE DA 0 o E A be ees 27 1 16 1 Port StatUs 2 2 022 er E 28 1516 2 TEE 28 LL Clas E ii 28 1 16 4 Remote PD VPO ei ee Eege ee ae ass inde dE Seven A 28 Ree E 28 A O 28 1 16 7 PoWer 2 2 ke RR 28 1 16 8 Temperaturen asien str malen sin eege EEN Get deeg 28 117 1 e 28 1 17 2 Overlo dd ln 28 1 17 3 Short COU EE 28 1 17 4 Power Denied COUNTE uk 28 1 17 5 ES A ON 28 1 17 6 Reset Statistis Hu Ir II I 28 1 18 1 Power Allocated nar ie ee ee ee ita nde 29 1 18 2 Port 1 Port EE 29 1 18 3 Total Power All cated n20 4 EEN EEN e 29 1 18 4 Remaining Power anno aora E Ee eech 29 1 18 5 Refresh BUON senine renei arts 29 SNMP Window Simple Network Management Protocol 30 1 19 1 How to Receive SNMP Messages 30 1 192 ENa ble SNMP POS dd A Sa tt 30 1 19 3 ChecK Al Butto EE 31 1 19 4 Clear All Button EE 31 1 19 5 Midspan Description id dd Een AE a aa aeia rie ee 31 1519 6 Vistial WarNhiN E a A A dios 31 1 19 7Audible Warning au in in IE 31 1 19 8 Auto Rec
22. ion e Green for delivering e Blue for searching e Gray for disabled e Yellow for Requesting Power e Orange for Test mode e Red for Fault This shows the class being detected in case of normal operation It also shows the error value in case of a fault condition This shows the type of PD powered device detected by the Midspan If there is no PD detected the Midspan will not automatically apply power This shows the output voltage of the port This shows the DC current being delivered This shows the power being delivered This shows the junction temperature of the controller chip of that specific port This shows how many times the port has been in overload status This shows how many times the port has been shorted This shows how many times the port has denied power to loads This shows how many times the port has detected an invalid load This will reset all port statistics 28 1 18 1 Power Allocated 1 18 2 Port 1 Port 16 1 18 3 Total Power Allocated 1 18 4 Remaining Power 1 18 5 Refresh Button This section will display the power allocated to each port Ports that are not set to User Defined will be displayed in red text and will be set to the maximum watts _Fimware System Configuration Multiple Port Configuration System View Port Configuration Port Configuration Port Status Power Allocated Poll Statu 2
23. lable COM1 COM3 and COM50 Midspan Connection Connection Status Port Selection SNMP not Activated Connect Disconnect Renee en gt COM1 COM3 al 2013 Vigitron Inc All Rights Reserved If you are not sure which COM port to select you can go to the Device Manager window of your computer Click the Ports icon and a list of ports will be displayed along with a brief description The following example shows COM50 as being a USB serial port The Midspan is connected to this port Now you can go back and select the appropriate USB port to use to connect to the Midspan File Action View Help es m Ol mle a 3 VIGITRON36 gt Mi Computer gt a Disk drives gt WE Display adapters b DVD CD ROM drives gt 1 Human Interface Devices gt Eg IDE ATA ATAPI controllers gt ED Keyboards D D Mice and other pointing devices gt Ek Monitors gt E Network adapters a IF Ports COM amp LPT S K Communications Port COM1 rz ement Technology SOL COM3 50 USB Serial Port COM gt J Security Devices b Sound video and game controllers gt ja System devices b Universal Serial Bus controllers 15 Click the Connect button This should connect your PC to the Midspan and the Status at the bottom of the window should display Connected Midspan Connection Connection Status Port Selection SNMP not Activated Connect Disconnect E Connected
24. onnett se ee ge ZENNER 31 1 19 9 SNMP Message Descriptions ssenari ee ae aa a oa a Ea Eo aE ei ia ES 31 1 19 10 F ult Code Descrip a ae AER 32 Powering a 60W device using a Vi0015 Optional 33 AppendixA 1 20 Software Acceptance Terms and Conditions Warranty ccccceee Contact Information Table of Figures Figure 1 Vi22T6LT Front ET 9 Eiere 22 VI22T6LT Rear View Zen fear dal deet e Aah ee ee 9 Figure 3 Vi2216LT Application Drawing cc cccccccccssssssssecececessesesneaeeeeecesseseaaeseeeceeseseeaaeseeeessessesaaeeeeess 9 Figure 4 Firmware Window en niet in gsi bebi 17 Figure 5 System Configuration Wipdow 19 Figure 6 Multiple Port Configuration Window nennen 22 Figure 7 System View VWindow nn nnnnnnnnnnnanennnnss 24 Figure 8 PortiConfiguration cti di a Aaa edlen 26 Figure 9 Port Confieuratton nn anos 30 1 1 Overview 1 2 Drawings The MaxiiPower Model Vi2216LT is a 16 port High Power PoE Midspan It meets IEEE 802 3af IEEE 802 3at standards and High PoE application The MaxiiPower Vi2216LT can deliver 18W on all 16 ports simultaneously or up to 37W per port up to a total of 300W The PoE functions can be set up with a Windows GUI or use the default plug and play option The Midspan GUI is an easy and powerful tool that runs on the host PC It provides configuration power supervision monitoring and diagnostics of all ports through a USB cable The MaxiiPower Mids
25. or any subsequent breach thereof e Except as required by law the controlling language of this Agreement is English e You may assign your rights under this Agreement to any party that consents to and agrees to be bound by its terms Vigitron may assign its rights under this Agreement without condition e This Agreement will be binding upon and will inure to the benefit of the parties their successors and permitted assigns 35 Vigitron Inc warrants that all Vigitron products Product if used in accordance with these instructions will be free of defects in material and workmanship for lifetime defined as the duration period of time until product end of life is announcement After which Vigitron will continue to provide warranty services for a period of 3 years Period covering valid warranty will be determined by proof of purchase in the form of an invoice from an authorized Vigitron dealer Warranty will only be provided for as long as the original end user purchaser owns the product Warranty is not transferrable At Vigitron s option defective product will be repaired replaced or substituted with a product of equal value This warranty does not apply if in the judgment of Vigitron Inc the Product fails due to damage from shipment handling storage accident abuse or misuse or if it has been used or maintained not conforming to Product manual instructions has been modified or serial number removed or defaced Rep
26. pan is in 1U high and can be easily installed in 19 racks They are ideal for a wide range of CCTV or IT applications that require high power such as IP cameras wireless access points or VoIP to be connected to a central LAN switching fabric with ease Figure 2 Vi2216LT Rear View Up to 100 Meters Vi2216LT Up to 100 Meters IP Camera IP Camera Figure 3 Vi2216LT Application Drawing IP Camera end Installation Connect the cables from the camera or other powered device to the upper connectors When using the Vi2216LT the cable must be a Cat5 6 with a maximum length of 100 m Models Vi2300A and Vi2301A Ethernet extenders are compatible with the Vi2216LT Models Vi2400A and Vi2401 Ethernet extenders over Coax cable can also be used Ethernet Switch NVR end Installation Connect the RJ 45 cables from the Ethernet switch to the Standard Ethernet ports lower row of Midspan Status LEDs Pot Extended Ethernet ports Standard Ethernet ports No power provided PoE Green On Delivering power Flashing Fault condition Vi2216LT 10 1 3 Electrical 1 4 Environmental 1 5 Mechanical 1 6 Regulatory Certifications 1 7 Included Accessories Ethernet Interface UTP Output Power AC Input Output Status LED Connectors Setup Port Humidity Temperature Dimensions Weight Material Operation Storage CE RoHS WEEE Standard 10 100 1000Base T Category 5 o
27. r higher 57 VDC 300W max Aggregated 16 ports at 802 3af 15 4 W plus an additional 53 6W All ports are capable of delivering 37W up to a total of 300W 110 240 V AC 50 60 Hz 6 5 A max Green LED Ethernet Input Interface Shielded RJ 45 Ethernet Output Interface Shielded RJ 45 AC Power IEC380 8 inlet USB with Windows GUI 0 to 90 non condensing Operating 10 C to 50 C Storage 30 C to 70 C 1 75x17x12 in 4 3x43x30 5 cm HxWxL 8 Lbs 3 6 Kg Sheet metal and extruded Aluminum 0 C to 50 C 30 C to 70 C Mounting brackets for front rear or wall installations Rubber feet for desk applications Molded IEC 7 ft 200 cm power cord USB setup cable Specifications subject to change without notice 11 1 8 Hardware Setup Please follow the following steps to install the Midspan e Connect an AC power cable to the Midspan e Connect the USB cable in order to connect the Midspan to the Host PC optional e Connect the PoE powered device PD to one of the Midspans ports using a Cat5 6 e The Midspans are set to Auto mode by the factory In this mode the Midspan works as a plug and play device It automatically detects the PD and provides requested PoE power e To use the GUI Graphical User Interface a computer can connect to the Midspan through a USB cable The GUI must be started after the computer is connected to the Midspan 1 9 LED Diagnostics Each port is equipped with an LED that
28. s 37 0W Dynamic w Priority The power is budgeted based on the load and priority of the port Dynamic wo Priority The power is budgeted based on the load 20 1 11 2 ILIM ICUT Configuration 1 11 3 System Configuration 1 11 4 Chip ID 1 11 5 SW Version 1 11 6 Max Ports 1 11 7 Power Available 1 11 8 Power Allocated 1 12 1 Commands 1 12 2 Query 1 12 3 Apply Set the Current Limit and Current Cut Limit ILIM ICUT This section displays the status information about the Midspan This shows the current PSE control chip revision This shows the current running firmware version This shows the maximum number of Midspan ports detected by the software This shows the total available power for the Midspan This shows the total power allocated by the system Power allocated varies based on the power management mode selected Click the Query button to update the status fields Click the Apply button to configure the system with the inputted values 21 1 13 1 Detection Type The Multiple Port Configuration window enables a way to apply the same configuration to multiple ports in a single screen This is the fastest way to configure multiple ports with identical characteristics Ds VIGITRON High Power PoE Midspan System View Port Configuration SNMP Port Configuration Select All Detection Type 4 Point only Port 1 Classification
29. s message is sent when the Start SNMP button is pushed It will be followed with the status of every SNMP enabled port SNMP Deactivated This message is sent when the Stop SNMP button is pushed Comm Error If the Midspan connection to the host computer is interrupted a Comm Error and SNMP Deactivated message will be sent to the trap After a connection is re established a SNMP Activated message will be sent followed by the status of all enabled ports Port Idle A Port Idle message sent to a trap means the port is not connected to a valid load Portit Powered This message is sent when the port is powering a device Port Disabled This message is sent when the port is turned off in the GUI and will not supply power Port Forced Pwr This message is sent when the port is configured in the GUI to send power regardless of any connected device Port Power Req This message is sent when the port is connected to a valid device but either has not powered up yet or powering the device will exceed the allocated power 31 1 19 10 Fault Code Description Port Fault If there is a problem with a port a fault code will be sent Below is a list of all possible codes along with a brief description Code 1 MPS Absent Maintaining Power Signature This fault code is sent when there is a valid device connected to the port but it is not drawing the minimum current required to keep the port powere
30. t tdi 12 1 10 GUI System NEE UE E 12 GUI Graphical User Interface Installation Procedure cccccccccsssceceessececsesececsesececeesaeeecsesaeeeeeesaeeeeeeaaes 13 Username and Password 2 ees ns A AA A ina dd 14 Connecting the VI2216LT t9 3 Comp ter 4 2 een Ee deene 15 lg Ee TEE 17 System Configuration Window ccccceessssccecececessesnsaeceeeeecesseseeaeeeeecesessesaeaeeeeeesseesaaeaeeeeeesseeseaaaaeseeseeseesega 19 1 111 Power Management esnia cinien iiki en innen nun nen sn 20 LAT LIM IGUT Configuration ds 21 1 11 3 System Config ration 2 020 ent EEN NEEN EENS EEN EN ENKER e o Ur EE 21 1 11 5 SW Version ass ae isn eben 21 LAT E Alle 21 1 11 7 Power Avallable ran A ei dai ct 21 1 11 28 Power Allocated i cit Eis linie 21 AA A kB Een br ie sis R 21 112 2 Query EE 21 1 12 3 App IV a Buena re AI AAA eege ee 21 Multiple Port Configuration Window uuesssesensensennnnnnennnnnnnnnnnnennennnnnnnennnnunnonnnnennsnsnnnnnennnnnnssnsnnnannnnnnnenn 22 4 13 T Detecta 22 1 13 2 Classification 2 2 esata ta Ati 23 E To Elei HA EE 23 1 13 4 M x A TEE 23 1 13 5 Power Inrush Controlado en Ein she dee 23 113 CRT LEE 23 AS A E A NN 23 E eegene eege deeg eis Er dee lege eege 23 A NOT 23 E EN ele EE 23 System View WINDOW a A A eas AAA AAA AA AD ln ae te 24 A EE 25 114 2 Power Available ccoo ai Reh Beten DEI 25 1 14 3 Power Allocated to Active Portz 25 1 14 4 Power Delivering e e AE Ee
31. the arbitrator s decision in any court having jurisdiction The party bring arbitration agrees to incur the total costs and expenses of such arbitration and shall pay their counsel fees and expenses MISCELLANEOUS This Agreement constitutes the entire agreement between Vigitron and you concerning the subject matter hereof and it may only be modified by a written amendment signed by an authorized executive of Vigitron e Except to the extent applicable law if any provides otherwise this Agreement will be governed by the laws of the state of California U S A excluding its conflict of law provisions It is further agreed that if one or more provision of this agreement are held to be illegal or unenforceable under applicable California law such illegal or unenforceable portion s shall be limited or excluded from this Agreement to the minimum extent required that this Agreement shall otherwise remain in full force and effect and enforceable in accordance with its terms e This Agreement will not be governed by the United Nations Convention on Contracts for the International Sale of Goods e If any part of this Agreement is held invalid or unenforceable that part will be construed to reflect the parties original intent and the remaining portions will remain in full force and effect e A waiver by either party of any term or condition of this Agreement or any breach thereof in any one instance will not waive such term or condition
Download Pdf Manuals
Related Search