VM17LED – VM19LED
Contents
1. audio cable should be connected to the lineout on the audio card and the line in on the monitor Ensure that the audio cable is properly connected Inspect the audio cable for any apparent damage Double check by switching to another audio cable to see if the audio works 11 1DUO0L5B A 0 Regulations and Maintenance FCC compliance This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference ina residential installation This equipment generation uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may causeharmful interference to radio communications However there is no guarantee that interference will occur in particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Inc2. brightness of the screen Press 4 OR to adjust the parameter 3 Brightness This is used to adjust the image contrast Press 4 OR to adjust the parameter 4 Tint This is used to adjust the image Tint Press OR to adjust the parameter 5 Saturation This is Used to adjust the image saturation Press OR to adjust the parameter 6 Sharpness Adjust the sharpness It makes the image become soft Press 4 OR to adjust the parameter Color Temp Press 4 OR to adjust the color tones Cool Warm Normal 8 DNR Press OR adjust the noise reduction High Low Off Mid Note VGA Mode Contrast Brightness Color Temp Auto Adjust Sound Mode fus 1 Volume Press 4 OR to adjust volume level 2 Mute Press OR to select sound Off On 7 1DUO0L5B A 0 Setting Mode AV HDMI Mode Setting Language English Hn Position nm oiii Position V Zoom Scale Mode Reset VGA Mode Language H Position V Position H Zoom Zoom Clock Phase Scale Mode Reset 1 Language Press OR to select language 2 H Position Move the display picture left or right Press 4 OR to adjust the parameter 3 H Zoom Adjust the H size of the display picture Press 4 OR to adjust the parameter 4 V Position Move the display picture up or down Press 4 OR to adjust the parameter 5 V Zoom Adjust The V size of
3. the display picture Press OR to adjust the parameter 6 Clock Press 4 OR to adjust the parameter 7 Phase Press OR to adjust the parameter 8 Scale Mode Adjust the V size of the display picture Press OR to adjust Full 16 9 9 Reset Recall Default value Note Clock and Phase setting only VGA Mode 3 1DUO0L5B A 0 PIP POP Setup Mode Multi Window YAAAAAA 1 Multi Window Press OR toselect PIP POP mode 2 Sub Source Press 4 OR toselect AV VGA mode 3 Size Adjust the size of Sub Source window Press OR select Large Small Mid 4 Position Move the position of Sub Source window Press OR toselect LU RD RU LR position 5 Border Color Choose the border color of Sub Source window Press OR to select Black Blue color Sound Source Press OR to select Main Sub mode Swap Press S Select to Swap the Source of Main and Sub N O Note 1 AVI and AV2 HDMI and VGA cannot be displayed at the same time on the monitor in PIP POP mode 2 f POP mode is selected both images are scaled to fit the screen 9 1DUO0L5B A 0 Caring for Your LED Monitor Caring for your LED Monitor The LED color monitor is a sensitive piece of electronic equipment Proper care can prevent accidentally damaging the LED panel or the monitor itself By following these guidelines you can ensure
4. Keys Power 6 Key feature Keys Power A Auto gi S Select M Menu Function Description Toggle the display between standby mode and on off Press Power and waiting 6 sec monitor will be display Switch setting item Increase the value of the chose item Enter the main menu of the on screen display OSD Switch setting item Decrease the value of the chose item Switch mode PC AVI AV2 HDMI Function Description Toggle the display between standby mode and on Press Power and waiting 6 sec monitor will be display Automatically adjusts H Position V Position Pixel Clock and Phase for an optimal image in PC mode only Switch setting item Decrease the value of the chose item Switch setting item Increase the value of the chose item Switch mode PC AVI AV2 Enter the main menu of the on screen display OSD Auto Power 5 1DUO0L5B A 0 LED Status Display The following table describes the various power states of the LED monitor as represented by different LED color Power State LED Color On Green Standby Red No power Blank 6 1DUO0L5B A 0 OSD Control Function List OSD Menu Picture Mode Picture Mode Contrast Brightness Tob Saturation Sharpness Color Temp DNR 1 Picture Mode Press OR to select the picture mode User Standard Movie Vivid 2 Contrast This is used to set the
5. MER OPERATED CONTROLS AS EXPLAINED IN THE APPROPRIATE 0 MANUAL OR PRODUCTS WHICH HAVE BEEN ALTERED ABUSED OR HAVE MISSING OR ALTERED SERIAL NUMBERS 2 THIS WARRANTY SHALL NOT APPLY TO UNCRATING SETUP INSTALLATION OR THE REMOVAL AND REINSTALLATION OF PRODUCTS AFTER REPAIR 3 THIS WARRANTY SHALL NOT APPLY TO REPAIRS OR REPLACEMENTS NECESSITATED BY ANY CAUSE BEYOND THE RESULT OF MANUFACTURE INCLUDING BUT NOT LIMITED TO ANY MALFUNCTION DEFECTS OR FAILURE CAUSED BY OR RESULTING FROM UNAUTHORIZED SERVICE OR PARTS IMPROPER MAINTENANCE MODIFICATION OR REPAIR BY THE USER ABUSE MISUSE NEGLECT ACCIDENT FIRE FLOOD OR OTHER ACTS OF NATURE INCORRECT LINE VOLTAGE DAMAGE OR IMAGE BURNS TO TELEVISION PICTURE TUBES CAUSED BY OR ATTRIBUTABLE TO THE USE OF ANY ACCESSORY ELECTRONICS GAME OR DEVICE OR DAMAGE CAUSED TO IMAGE PICKUP DEVICES BY EXCESSIVE LIGHT THE FOREGOING IS IN LIEU OF ALL OTHER EXPRESSED WARRANTIES AND WE DO NOT AUTHORIZE ANY PARTY TO ASSUME FOR US ANY OTHER OBLIGATION OR LIABILITY IN NO EVENT SHALL WE BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF THIS PRODUCT OR FOR ANY DELAY IN THE USE OF THIS PRODUCT DUE TO CAUSES BEYOND OUR CONTROL SOME STATES DO NOT ALLOW LIMITATIONS OF HOW LONG AN IMPLIED WARRANTY LASTS AND OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES THE ABOVE LIMITATIONS ON IMPLIED WARRANTY AND CONSEQUENTIAL DAMAGES MAY NOT APPLY TO YOU THIS
6. VM17LED VM19LED speco technologies Pleasereadthis manual thoroughly before operation and keep it handy for further reference 1 1DUOOL5B A 0 Introduction and Package Contents Introduction Congratulations on your purchase You can expect only the sharpest and most brilliant color images from this monitor Featuring an easy to use OSD control and built in speakers you will find this monitor both easy to use and a pleasure to look at Package Contents e One LED Monitor e 12V DC Adapter Power cord e D Sub 15 pin VGA connector Cable e Users Guide Hardware Installation The following sections in this guide give clear step by step descriptions of the installation process and explain how to use the monitor for optimum results Please pay attention to the Regulations and Warnings Section of this user s manual before setting up the display monitor Failure to do so may inadvertently result in personal injuries or machine damage VGA PCaudio AV audio AV1 AV1 AV2 AV2 Input Output Input Output 1DUOOL5B A 0 Specifications VM17LED VMT9LED LU Lam Composite Output BNC x 2 Composite Input BNC x 2 lo Single Connector VGA x 1 RCA x 2 PC Audio x 1 HDMI x 1 Speaker 1 5W x2 Display Mode Video 1 Video 2 PC HDMI Operation 0 40 C 32 104 F Storage 10 60 C 14 140 F 15W Max in ON Mode Under 3W in Power Saving Mode 100 Vac Under 5W in P
7. WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE NOTE FOR YOUR PROTECTION IN THE EVENT OF THEFT OR LOSS OF THIS PRODUCT PLEASE FILL IN THE INFORMATION REQUESTED BELOW AND RETAIN WITH YOUR SALES RECEIPT MODEL NO SERIAL NO LOCATED ON BACK OR BOTTOM OF UNIT DATE OF PURCHASE WHERE PURCHASED PURCHASE PRICE Speco Technologies FOR MORE INFORMATION REGARDING 200 NEW HIGHWAY SERVICE OR RETURN CALL US AMITYVILLE NY 11701 www specotech com TOLL FREE 1 800 645 5516 IN METRO NY 631 957 8700 ALWAYS USE DISCRETION WHEN INSTALLING VIDEO AND OR AUDIO SURVEILLANCE EQUIPMENT ESPECIALLY WHEN THERE IS AN EXPECTATION OF PRIVACY INQUIRE REGARDING FEDERAL STATE AND OR LOCAL REGULATIONS APPLICABLE TO THE LAWFUL INSTALLATION OF VIDEO AND OR AUDIO RECORDING OR SURVEILLANCE EQUIPMENT PARTY CONSENT MAY BE REQUIRED l4 1DUOOL5B A 0
8. ce Keep the monitor away trom Extremely hot cold or humid places places directly under sunlight dusty surroundings equipment that generate strong magnetic fields 13 1DUO0L5B A 0 cn speco technologies LIMITED WARRANTY THIS WARRANTY IS VALID ONLY ON PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF AMERICA THIS WARRANTY APPLIES ONLY TO THE ORIGINAL USER SUBJECT TO CONDITIONS AND EXCLUSIONS FOUND BELOW THIS PRODUCT IS WARRANTED AGAINST MANUFACTURING DEFECTS IN MATERIAL AND WORKMANSHIP FOR THE FOLLOWING PERIOD FOR PARTS AND LABOR SPECO TECHNOLOGIES CAMERAS 5 YEARS SPECO TECHNOLOGIES MONITORS 1 YEAR BALANCE OF SPECO TECHNOLOGIES LINE 1 YEAR IR LEDs Time lapse VCR Drum Assemblies amp Heads 90 DAYS SPECO TECHNOLOGIES WILL REPAIR OR REPLACE AT OUR DISCRETION ANY PARTS FOUND TO BE DEFECTIVE FOR THE WARRANTY PERIOD SPECIFIED WE WILL PROVIDE A REPLACEMENT FOR ANY DEFECTIVE PART CONDITIONS 1 YOU MUST OBTAIN A RETURN AUTHORIZATION NUMBER FOR ANY MERCHANDISE BEING RETURNED TO SPECO TECHNOLOGIES WHETHER FOR RETURN EXCHANGE OR REPAIR WHETHER IN OR OUT OF WARRANTY 2 THIS WARRANTY WILL BE HONORED ONLY UPON PRESENTATION OF THE ORIGINAL DATED BILL OF SALE OR SALES SLIP 3 TRANSPORTATION OF THE PRODUCT TO OUR SERVICE DEPARTMENT IS THE RESPONSIBILITY OF THE USER REPAIRED OR REPLACED PRODUCT WILL BE RETURNED PREPAID DURING THE WARRANTY PERIOD EXCLUSIONS THIS WARRANTY SHALL NOT COVER ADJUSTMENT OF CUSTO
9. many years of trouble free use The LED monitors plastic casing and LED glass panel can be cleaned with a soft lint free cloth Never use scrub pads or other cleaning materials with abrasive surfaces to clean your LED monitor a A slightly damp cloth or newspaper may be used to clean the glass plate of fingerprints or smudges b For the plastic case a mild detergent may be used to clean the surface However you should ensure not to use too much detergent or water as this could leak into the interior of the casing Do NOT use cleaning fluids based on alcohol methylated spirit or ammonia The glass plate has a hard surface coating to prevent scratches However the use of strong chemical cleaning agents may damage this coating Use only a mild soap or detergent and water or specially formulated cleaners made for cleaning glass panels Avoid direct contact with water or other liquids Never use the LED monitor in or around areas where water may pose a potential hazard to normal operation Only use the LED monitor indoors and avoid monitor contact with oil vapor steam moisture and dust The LED monitor should be used in a clean and low humidity environment Keep the LED monitor away from heaters or other heat sources such as lighting equipment or direct sunlight Keep the LED monitor away from sharp object to touch the screen like fingernail and pencil WARNING Any unauthorized modification to this equipment could result in
10. ower Saving OSD Control Picture Mode Contrast Brightness Color Tint Sharpness Color Temp DNR English German French Italian Spanish Russian Turkish Power Consumption OSD Languages Polish Dutch Czech Tilt cor Humidity 10 90 16 7 Million Colors Vertical 80 80 Viewing angle Horizontal 85 85 Display area H x V 13 3 x10 6 14 8 x11 8 17 X 17 Dimension W x H x D 15 2 x 15 2 6 5 16 7 x 16 3 x 6 5 17 X 17 X 17 Weight o 7 5 Ibs 7 7 Ibs monitor Metal only 14 3 Ibs 15 7165 3 1DUO0L5B A 0 VGA Timing Item Resolution H Freq kHz V Freq Hz 640x400 70 31 460 70 080 2 640x480 60 31 469 59 940 3 640x480 72 37 861 72 809 4 640x480 75 37 500 75 000 5 720x400 70 31 460 70 080 6 800x600 56 35 156 56 250 7 800x600 60 37 879 60 317 8 800x600 72 48 077 72 188 9 800x600 75 46 875 75 000 10 1024x768 60 48 363 60 004 1 1024x768 70 56 476 70 069 12 1024x768 75 60 023 75 029 13 1280x1024 60 63 981 60 020 14 1280x1024 75 79 976 75 025 Remark The timings with presetting are recommended Users have to adjust the timing manually if it is not included in the presetting list 4 1 DUOOL5B A 0 Monitor and OSD Control Monitor and OSD Control The LED color monitor has a simple control layout for controlling the monitor and OSD On Screen Display functions The table below summarizes the control keys and their related functions 5 Key feature
11. rease the separation between the equipment and receiver e Connect the equipment to an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Precautions Read all of these instructions and save them for later use Follow all warnings and instructions on the product Product Do not cover or block the vent holes in the case Do not insert sharp objects or spill liquid into the LED monitor through cabinet slots They may cause accident fire electric shock or failure Disconnect the power plug from the AC outlet if you will not use it for an indefinite period of time Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage potentials or other risks Do not touch the screen directly with your fingers You may damage the screen and oil from your skin is difficult to move Do not apply pressure to the screen The LED is very delicate Power 12 1DUO0L5B A 0 Use the type of power indicated on the marking label Plugs 9 9 9 Do not remove any of the prongs of the monitor s three pronged power plug Disconnect the power plug from the AC outlet under following conditions If you will not use it for an indefinite period time When the power cord or plug is damaged or frayed If the product does not operate normally when the operation instructions are followed Adjust only tho
12. se controls that are covered by the operating instructions Improper adjustment of other controls may result in damage and will offen require extensive work by a qualified technician to restore the product to normal operation If the product has been dropped or the cabinet has been damaged If the product exhibits a distinct change in performance indicate a need for service Power and extension cords Do not allow anything to rest on the power cord Do not locate this product where persons will walk on her cord Use the proper power cord with correct attachment plug type If the power source is 120 V AC use a power cord that has UL and C UL approvals If the power source is a 240 V AC supply use the tandem T blade type attachment plug with ground conductor power cord that meets the respective European country s safety regulations such as VDE for Germany Do not overload wall outlets or power cords Ensure that the total of all units plugged into the wall outlet does not exceed 10 amperes Ensure that the total ampere rating of all units plugged into the extension cord is not over the cord s rating If the power supply cord which came with your monitor is to be connected to the PC instead of the wall outlet this equipment is to be used with UL TUV approved computers with receptacle rated 100 240V AC 50 60Hz 2 0A minimum Environment Place the monitor on a flat and leveled surface Place the monitor in a well ventilated pla
13. the revocation of the authorization To operate the equipment and void the product warranty 10 1DUO0L5B A 0 Frequently Asked Questions Power button does not respond Check the power cord to ensure that it is securely plugged into the monitor base and also into the electrical outlet Ensure there is electrical power coming from the AC outlet Use another device to check for power Unplug the power cord of the monitor from the AC outlet wait a few minutes then to plug the power cord into the AC outlet again This will reset the monitor and power supply No image on the screen Ensure that the DB 15 signal cable is properly connected to the display card computer Check the DB 15 signal cable connector on both ends for bent or pushed in pins The display card should be properly seated in its card slot Ensure that the computer s power switch is ON Ensure that the monitors power switch is ON Unplug the power cord of the monitor from the AC outlet wait a few minutes then to plug the power cord into the AC outlet again This will reset the monitor and power supply Power LED is RED with no image on the screen Check the DB 15 signal cable to ensure that it is properly attached to the graphics display card Check the DB 15 signal cable on both ends for bent or pushed in pins Make sure the computer is not in a power saving mode move the mouse or press a key on the keyboard No sound coming from the audio speakers The
Download Pdf Manuals
Related Search