Home

S84259 EVOnet FB DDN Camera QR Manual v1.0

1. Network Camera WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL COMPLIANCE NOTICE OF FCC THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE PURSUANT TO PART 15 OF THE FCC RULES THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT THIS EQUIPMENT GENERATES USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE WARNING CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS The information in this manual is believed to be accurate as of the date of publication We are not responsible for any problems resulting from the use thereof The information contained herein is subject to change without notice Revisions or new editions to this publicat
2. Start menu on the PC Click SiRiS Lite and then SiRiS Lite Client Enter login information Default user ID Admin Default password 12345678 Click the Live or Play tab on the screen Click a device in the Site panel and drag and drop it on the screen Video from the device will be displayed on the screen SiRiS Lite admin Live 1 Inside 1 System View Playback About Site NOTE See the User s Manual on the CD for details 16 V1 0
3. that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the equipment to its normal operation E Ifthe equipment has been dropped or the cabinet damaged F When the equipment exhibits a distinct change in performance this indicates a need for service 14 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 15 Safety Check Upon completion of any service or repairs to this equipment ask the service technician to perform safety checks to determine that the equipment is in proper operating condition 16 Field Installation This installation should be made by a qualified service person and should conform to all local codes 17 Correct Batteries Warning Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions 18 Tmra A manufacturer s maximum recommended ambient temperature Tmra for the equipment must be specified so that the customer and installer may determine a suitable maximum operating environment for the equipment Network Camera Package Contents e Network Camera e C Mount Ring e
4. Auto Iris Lens 1 If necessary solder the lens control wires to the connector socket supplied with the lens NOTE Please refer to the lens manufacturer s manual for soldering the lens control wires Connector Socket Cover IRIS Control Cable Connector Socket Heat Shrink Tubing Damp Coil Damp Coil Drive Coil Drive Coil 2 Remove the protective cover from the camera 3 Mount the lens on the camera by turning the lens clockwise and then connect the auto iris jack to the auto iris lens connector Use the lens of which the auto iris jack is long CS Mount Lens 1 Remove the protective cover from the camera 2 Mount the CS mount lens on the camera by turning the lens clockwise Quick Reference Guide C Mount Lens 1 Remove the protective cover from the camera 2 Mount the C mount ring on the _ gt gt camera by turning the ring clockwise A 3 Mount the C mount lens on the C mount ring by tuning the lens clockwise Running Installation Program INIT The INIT Integrated Network Installation Tool program is provided with the product for connection to the product You can connect to the product remotely via Ethernet to change its settings and manage it Run the INIT program as follows Insert the program CD Run the INIT program by double clicking the INIT exe file in the INIT folder Set the language option You can change the language option afte
5. DC Type Auto Iris Lens Connector Socket e Protective cover attached to the unit e Installation CD INIT SiRiS Lite software and User s Manuals e Quick Reference Guide This Document e Mount Kits mm 0 16 46 1 mm 1 81 Quick Reference Guide Front Side View Image Sensor Converts an optical image of the object to an electric signal NOTE Cover the image sensor by using the protective cover provided with the camera when a lens is not mounted on the camera Right Side View Protective cover C Mount Ring Back Focus Adjustment Ring Mount Bracket ATT TUT e Protective cover Attach when a lens is not installed to protect the image sensor e C Mount Ring Attach the ring provided with the camera to the camera when using the C Mount lens e Back Focus Adjustment Ring Loose screws and adjust the back focus by turning the ring clockwise or counter clockwise and then tighten the screws to fix the current back focus e Mount Bracket You can attach a bracket to the bottom or top of the camera to mount it Use 1 4 20 UNC 20 Thread 2 5mm 0 2 mm ISO Standard or 0 197 ASA Standard standard screws when attaching the bracket Top View Factory Reset Switch Use to return all settings to the original factory settings See below for details Network Camera Factory Reset This will only be used on the rare occasions that you want to return all the setting
6. amera a E al INIT Integrated Network Installation Tool ee IP Address Setup see BQ Lookup X Setup X y Network Option Interface 1 Type DHCP Multiselection IP Address Setup gt 2 168 1 e No Nan Remote Setup WebGuard l 10 0 Apply Setup File E ze Make Setup File DNS Server 0 0 0 0 J From DHCP 7 Set up DVRNS ES L d k Al IP address Setup l e Use DVRNS Enter the IP address or domain name of the DVRNS server e Port Set up the port number of the DVRNS server ZlUse DVRNS DVRNS Server Port 10088 E 10000 12000 e Use NAT Check the box when the camera uses Uet a NAT Network Address Translation device for ee e network connection e DVR Name Enter the camera name to be registered on the DVRNS server Check whether or not the name is available by clicking the Check button Back __ Finish Cancel A NOTES e The network camera supports DVRNS DVR Name Service function The DVRNS function allows you to access the network camera remotely by using the camera name instead of its IP address and it allows the network camera to use dynamic IP addresses for remote connection For the DVRNS function to work properly the camera should be registered on the DVRNS server e You will need to get the IP address or domain name and the port number of the DVRNS server from your network administrator CAUTION The DVRNS server
7. at the network camera uses the DVRNS function and the DVRNS server address is dvronline net and camera name is camera 3 Enter login information The user ID and password you enter should match the user ID and password used to log on to the network camera default user ID password is admin with no password or pacom pacom Web Watch Windows Internet Explorer http 10 0 17 43 watch htm A CAMI Log Out Version Information Full Display Camera Button Image Adjustment Setup Save Image Remote Setup Event Status Window Screen PBOOOBDOOOO 13 Quick Reference Guide Recording and Playing Back 1 Insert the installation CD 2 Install the SiRiS Lite installation file on the PC See the User s Manual on the CD for details about installation 3 Run the SiRiS Lite Setup program as follows Go to the Start menu on the PC gt Click SiRiS Lite and then SiRiS Lite Setup Enter login information default user ID is admin and password is 12345678 SiRIS Lite Setup admin 4 Register the device to record as follows Go to the Device menu Click All Devices in the Site panel and then the F button at the bottom Select the scan mode and find the device Check the box beside the device name and click the Add Devices button at the bottom Enter information set in the device User Authentication Name lt No Name gt g pEECCC OCCCeoqqqceoooeer E 5 Add
8. by tapping the Settings button in the default menu Address Watch Port Search Port Audio Port Enter the IP address and port number of the device If the device uses the DVRNS function check that the Use DVRNS option is enabled and enter the device name registered on the DVRNS server instead of the IP address The name you enter should match the name set during the DVRNS setup on the device User ID Password Enter the user ID and password The user ID and password you enter should match the user ID and password used to log on to the device iOS Based Mobile Devices 1 Run the App Store application in the mobile device 2 Enter iPDR mobile in the search field of the App Store application 3 Install the 1PDR mobile program and run the program A s p F a H y u goon 13 ef space Search ad athe _ iPDR mobile allows you to access Supported Linux PDR s list 4 Channel POR s PDR 420 FW Ver 4 0 0 or above PDRH 420 FW Ver 4 0 0 or above POR 440H FW Ver 3 4 1 or above PDRH 440 FW Ver 1 1 0 or above POR 4LXH FW Ver 1 2 0 or above PDRH 4LX FW Ver 1 0 1 or above MDR410 FW Ver 1 1 2 or above MD204 FW Ver 1 2 1 or above 8 Channel PDR s PDR 800 FW Ver 2 0 1 or above Search hon m 0 DVR s in remote locations and monitor live video via DVR s in remote locations and monitor live video via iPDR mobile allows you to access the POR connec
9. er company 8 Power Cord Operator or installer must remove power and TNT connections before handling the equipment 9 Lightning For added protection for this equipment during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the equipment due to lightning and power line surges If thunder or lightning is common where the equipment is installed use a surge protection device 10 Overloading Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock 11 Objects and Liquids Never push objects of any kind through openings of this equipment as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the equipment 12 Servicing Do not attempt to service this equipment yourself Refer all servicing to qualified service personnel 13 Damage requiring Service Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions A When the power supply cord or the plug has been damaged If liquid is spilled or objects have hit the equipment If the equipment has been exposed to rain or water If the equipment does not operate normally by following the operating instructions adjust only those controls
10. etain Instructions The safety and operating instructions should be retained for future reference 3 Cleaning Unplug this equipment from the wall outlet before cleaning it Do not use liquid aerosol cleaners Use a damp soft cloth for cleaning 4 Attachments Never add any attachments and or equipment without the approval of the manufacturer as such additions may result in the risk of fire electric shock or other personal injury 5 Water and or Moisture Do not use this equipment near water or in contact with water 6 Placing and Accessories Do not place this equipment on an wall or ceiling that is not strong enough to sustain the camera The equipment may fall causing serious injury to a child or adult and serious damage to the equipment Wall or shelf mounting should follow the manufacturer s instructions and should use a mounting kit approved by the manufacturer NS This equipment and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the equipment and cart combination to overturn Do not place this equipment in an enclosed space Sufficient ventilation is required to prevent an increase in ambient temperature which can cause malfunction or the risk of fire 7 Power Sources This equipment should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power please consult your equipment dealer or local pow
11. ing program on an Android or iOS based mobile device e WebGuard Web monitoring program e SIRiS Lite Monitoring recording and playback program See the User s Manual of each program on the CD for details PDR mobile CAUTION This program uses large amounts of data and you are responsible for all data charges Please contact your service provider s customer service to confirm or add an unlimited data plan Android Based Mobile Devices 1 Run the gt Play Store Google Play application in the mobile device 2 Enter aPDR mobile in the search field of the Play Store Google Play application 3 Install the aPDR mobile program and run the program 4 Push the Menu button of the mobile device and the default menu is displayed B B ME 20 47 3 BME 20 47 aPDR mobile Q gt aPOR mobile Q P APPS aPDR mobile aPDR mobile xen qwertyuioop al iS d US BORE Mi amp zxcvb nma Manage applications aPDR mobile aPDR mobile pamate aPDR mobile 5 Tap the New site button and enter the device network camera information to register it 11 Quick Reference Guide Description Use DVRNS Address Watch Port 8016 Search Port 10019 Description Enter the device name to use in the aPDR mobile program Use DVRNS If the device uses the DVRNS function enable the Use DVRNS option You can set up the information for the DVRNS server
12. ion may be issued to incorporate such changes The software included in this product contains some Open Sources You may obtain the complete corresponding source code from us See the Open Source Guide on the software CD OpenSourceGuide OpenSourceGuide pdf or as a printed document included along with the User s Manual WEEE Waste Electrical amp Electronic Equipment Correct Disposal of This Product Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling E amp E Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal Quick Reference Guide Important Safeguards 1 Read Instructions All the safety and operating instructions should be read before the appliance is operated 2 R
13. nSSL Project for use in the OpenSSL Toolkit http Avwww openssl org Network Camera Connecting to Network Camera Connecting from Local PC The network camera is set to be automatically assigned a temporary IP address from a DHCP server by default If there is no DHCP server the IP address is set to 169 254 x x It allows you to connect to the network camera without additional installation procedure 1 Run the INIT program on the local PC 2 Click the Lookup icon and select Look Up Devices LAN HO INIT Integrated Network Installation Tool Qo Ja Look Up Devices LAN Manual Connect WAN Model IF 3 A list of network cameras within a local network is displayed Check the MAC address of the network camera to connect You can check the MAC address in the sticker adhered to the network camera FEA Lookup z EJ Setup aA LM Test v Reset X Yi Management C Multiselection 10 0 123 138 00 03 22 0A D8 88 1 FA ae ee aranranian an an an arian No Name Model IP Address MAC Address Version HW SW a 4 Check the IP address of the network camera to connect in the list of network cameras 5 Run a remote program on the local PC and register the network camera on the remote program with the IP address Connecting from Remote PC If you want to connect to the network camera from a remote PC it is required to change the network connection information of the network camera by connecti
14. ng to the network camera from a local PC 1 Find the network camera to connect Refer to the explanation of procedures from 1 to 3 in the To connect from a local PC section above 2 Select the network camera to connect and click the Setup icon Select IP Address Setup and set up the network connection information as follows Quick Reference Guide r E l 8 INT Integrated Network Installation Tool aaa IP Address Setup pe EJ Lookup Setup X y Network Option Interface 1 Type DHCP Multiselection IP Address Setup nl 192 168 1 No Nan Remote Setup WebGuard Apply Setup File Make Setup File DNS Server o o0 0 0 v From DHCP f 7 Set up DVRNS Next Cancel e Type Select Manual ADSL with PPPoE or DHCP depending on the network connection type If you select Manual you need to acquire the IP address gateway and subnet mask from your network administrator or Internet service provider The ADSL connection requires ID and password e DNS Server Enter the IP address of the DNS server If you selected DHCP for the network connection type selecting From DHCP automatically assigns the IP address of the DNS server e Set up DVRNS Enable the option by checking the box When you check the box the Next button at the bottom changes to Next Click the Next button and enable the Use DVRNS option by checking the box Set up the DVRNS function referring to the DVRNS Setup section bel
15. om the camera when switching the power source from 12 VDC to PoE e The network connector is not designed to be connected directly with cable or wire intended for outdoor use WARNING ROUTE POWER CORDS SO THAT THEY ARE NOT A TRIPPING HAZARD MAKE CERTAIN THE POWER CORD WILL NOT BE PINCHED OR ABRADED BY FURNITURE DO NOT INSTALL POWER CORDS UNDER RUGS OR CARPET USE THE POWER CORD THAT HAS A GROUNDING PIN IF YOUR POWER OUTLET DOES NOT HAVE A GROUNDING PIN RECEPTACLE DO NOT MODIFY THE PLUG DO NOT OVERLOAD THE CIRCUIT BY PLUGGING TOO MANY DEVICES INTO ONE CIRCUIT Installation A lens is not supplied with the camera Ask your dealer or distributor about purchasing one The camera supports manual iris and the DC type auto iris lenses and it accepts CS and C mount lenses NOTES e A mega pixel lens is recommended for the best image resolution e Video type auto iris lenses are not supported e Use a lens that weighs less than 1 0 Ibs 450g If the lens weighs too much the camera might become unstable WARNING You might need to reinforce the wall or ceiling If the wall or ceiling is not strong enough to support the camera the camera might fall damaging the camera or causing injuries Manual Iris Lens 1 Remove the protective cover from the camera Network Camera 2 Mount the lens on the camera by turning the lens clockwise 3 Turn the iris ring on the lens to the open position and adjust the iris properly DC Type
16. ow 3 Set up the UPnP function in the NAT Network Address Translation device and the network camera See the NAT device User s Manual for details about setting in the NAT device See the UPnP Function Setup in Network Camera section below for details about setting the in the network camera NOTE If the NAT device does not support the UPnP function you have to set up port forwarding manually Also if more than one network camera is connected to the NAT device the port numbers of each network camera should be different See the NAT device User s Manual for details about setting port forward in the NAT device See the explanation of procedures from 1 to 3 in the UPnP Function Setup in Network Camera section below for details about changing port numbers of the network camera 4 Run a remote program on a remote PC and register the network camera on the remote program with the name registered on the DVRNS server NOTE Check that firewall is disabled in the router or NAT device If firewall is enabled you may not connect to the network camera Ask your network administrator for details or see the NAT device User s Manual DVRNS Setup Run the INIT program on the local PC Select the network camera Click the Setup icon gt Select IP Address Setup Set up the network connection information and check the Set up DVRNS box Click the Next button Check the Use DVRNS box Enter the DVRNS server information Network C
17. r running the program The following Main screen appears and you can connect to the camera and change its settings Selecting the Multiselection option allows you to select multiple network devices and change their settings at the same time The same model only See the INIT User s Manual on the CD for details about each function AUN 2 j egrated Network Ini iC ils To EA Looky x E setup Multiselection M Test s O reset y Yi Management No Name Model TP Address MAC Address Version HW SW NOTES I o Noaue w 10 0 114 97 10 0 114 30 10 0 114 26 10 0 114 96 10 0 114 82 10 0 128 82 10 0 114 24 10 0 114 106 10 0 114 153 10 0 112 177 10 0 114 101 10 0 114 102 192 168 1 129 10 0 17 140 10 0 125 122 10 0 127 132 10 0 113 41 10 0 124 249 10 0 125 93 00 03 22 0D 8A 3A 00 03 22 0D 89 D0 00 03 22 0D 8A 2E 00 03 22 0A 71 87 00 03 22 07 F9 02 00 03 22 06 FE E0 00 03 22 0C 0E 73 00 03 22 06 D7 37 00 03 22 0A 6B 7F 00 03 22 07 33 F9 00 03 22 05 61 66 00 03 22 05 EF 09 00 03 22 06 FE 6C 50 56 63 42 B9 94 50 56 63 47 7F B2 00 03 22 0F 7A 42 50 56 63 43 4F 68 00 18 31 77 34 26 00 18 31 78 4F FC C 10 0 123 138 00 03 22 0 08 88 Do not change the IP address of your computer manually while running the INIT program If you do the network connection between the network device and your computer might be cut off e This product includes software developed by the Ope
18. rd 12088 gt 10019 RTSP 554 gt 81 t i Configuring Network Camera Run the INIT program gt Click a network camera from the device list Click the Setup icon on the Main screen Select Remote Setup from the Setup menu T O Reset Y Management IP Address Setup Remote Setup IP Address MAC Address Version HW SW WebGuard 10 0 114 97 00 03 22 0D 8A 3A E 0 123 00 03 22 0 p8 88 ooh Soup Fie 10 0 123 138 00 03 22 0A D8 88 10 0 114 30 00 03 22 0D 89 D0 Make Setup File j s 10 0 114 26 00 03 22 0D 8A 2E ees 10 0 114 96 00 03 22 0A 71 87 The Remote Setup screen appears and you can change the settings of the network camera See the User s Manual on the CD for details about the configuring each settings Remote Setup Quick Setup System Network Video gt System English aes 2012 10 18 16 11 44 tie GMT 05 00 Eastern Time US amp Canada DST gt Event Action gt Event Type DHCP IP Address 0 0 0 0 DNS Server 0 0 0 0 Mirroring None Streaming Default Record St Off Compression H 264 None Resolution 1280X720 None Quality Standard None Bitrate Control CBR None Frame Rate 30 00 ips None Cancel l 10 Network Camera Monitoring video from the network camera is supported on remote programs PDR mobile WebGuard SiRiS Lite e aPDR mobile iPDR mobile Monitor
19. rs of the User s Manual for details The LED will not light regardless of the status if the Status LED is disabled when configuring the System General setup e Network Port Connect a Cat5 cable with an RJ 45 connector You can change the settings manage the camera upgrade the software or monitor video remotely via the network connection Refer to the INIT User s Manual for details about network connection setup When using a PoE switch the camera can be supplied with power over Ethernet cable supported for not every model Refer to the PoE switch manufacturer s manual for details Quick Reference Guide e Network LED Indicates network connection status See Appendix LED Indicators of the User s Manual for details The LED will not light regardless of the status if the Status LED is disabled when configuring the System General setup NOTES e Camera surveillance may be prohibited by laws that vary by region Check the laws in your area before using this product for surveillance purposes e To make connections on the power connector strip press and hold the button and insert the wire in the hole below the button After releasing the button tug gently on the wire to make certain it is connected To disconnect a wire press and hold the button above the wire and pull out the wire CAUTIONS e The frame GND of the power should be grounded before using e The camera restarts after the power adaptor is disconnected fr
20. s to the original factory settings CAUTION When performing a Factory Reset you will lose any settings you have saved Cut off the power from the camera Poke a straightened paperclip into the factory reset switch hole Turn on the power while holding the reset switch Release the switch in about 5 seconds after the Power LED blinks The camera resets to factory defaults and restarts after completing the factory reset You can perform a factory reset while the camera is turned on by pressing the factory reset switch and releasing the reset switch A factory reset also can be performed remotely by running the INIT program The camera restarts after completing the factory reset Refer to the INIT User s Manual for details on remote factory resetting Auto Iris Lens Connector Video Out Power Power LED Network Port Network LED e Auto Iris Lens Connector Connect the auto iris jack if the lens is a DC type auto iris lens Use the lens of which the auto iris jack is long e Video Out Connect to a monitor This is intended for video preview while adjusting the camera e Power DC12V Connect two wires from the power adapter You must distinguish power polarity when connecting the wires The camera starts booting as soon as power is applied FGND Frame GND Ground the camera by using the grounding cable and screw e Power LED Indicates system operation status See Appendix LED Indicato
21. that we support is for your convenience and it can stop operating unexpectedly for the server update or malfunction We are not responsible for any problems caused by the DVRNS server stopping operation UPnP Function Setup in Network Camera 1 Run the INIT program on the local PC and find the network camera to connect Refer to the Connecting from Local PC section 2 Select the network camera to connect and click the Setup icon 3 Select Remote Setup and select Network Port QoS from the menu on the left side 4 Check the Use UPnP box at the bottom and click the Check button The network camera checks the current port settings Quick Reference Guide INIT Integrated Network Installation Tool sass Remota Saup ea NETWORK PORT QOS EQ Lookup S a Setup Ti Use Port psc Multiselection IP Address Setup a Admin 8200 a m ma Remote Setup Control Watch J 8016 5 a WebGuard IEEE 802 1X Record J 8017 H 4 bad Action WebGuard 80 7 Apply Setup File Event Make Setup File sn l Use HTTPS W Use UPnP Cancel J Apply UPnP check A success message is displayed if all the current port numbers Recommended Port Numbers are available and recommended port numbers are displayed eo ie if any of the current port numbers are not available Clicking See the Apply button applies the recommended port numbers WebGua
22. the device to Device Group as follows Click Device Group in the Site panel and then the F button at the bottom A list of registered devices is displayed Select the devices gt The selected devices are displayed in Device Group 14 Network Camera Add Device Group fd k O Select Devices Below Selected Device List Name Name GA Info Desk A Info Desk Inside 1 Gi CAM Ga CAM2 6 Allocate storage for recording as follows Go to the Storage menu Click the F button at the bottom Select a hard disk drive from the list and click the Add button at the bottom gt Allocate storage Add Storage Allocate Storage Path D WNexusStorage Drive Type IDE Free Space 161 GB Storage Capacity 7 Configure recording schedule as follows Go to the Schedule menu gt Click the Schedule Setup button at the bottom Schedule windows are displayed with the current settings for each Preset Double click anywhere in the empty space of each schedule window and the Preset setup window appears Select a desired Preset from the Preset list or add a new Preset by clicking the kj button 15 Quick Reference Guide Select preset Select preset below Name Description Always Every Day 8 Run the SiRiS Lite Client program to monitor or playing back recorded video as follows Go to the
23. tion anytime and Supported Linux PDR s list 4 Channel POR s gt PDR 420 FW Ver 4 0 0 or above PDRH 420 FW Ver 4 0 0 or above PDR 4LXH FW Ver 1 2 0 or above PDRH 4LX FW Ver 1 0 1 or above MDR410 FW Ver 1 1 2 of above M0204 FW Ver 1 2 1 or above 8 Channel POR s PDR 800 FW Ver 2 0 1 or above 4 Tap the Ef button and enter the device network camera information to register it 12 Network Camera e General Enter the device name to use in the iPDR mobile program e Connection Info Enter the IP address and port number of the device If the device uses the DVRNS function enable the DVRNS option and New Site General SOLUTE enter the device name registered on the DVRNS server instead of the Gane aes oo i IP address The name you enter should match the name set during the ovans TOF DVRNS setup on the device Watch Port e Login Info Enter the user ID and password set on the device The user aana ID and password you enter should match the user ID and password used Baroni ENN to log on to the device Login Info WebGuard Start Internet Explorer on your PC 2 Enter in the address field the network camera s IP address and WebGuard port number or DVRNS server address and camera name registered on the DVRNS server e g http 10 0 127 1 80 in the case that the IP address is 10 0 127 1 and the WebGuard port number is 80 or http dvrnames net cameral in the case th

S84259 EVOnet FB DDN Camera QR Manual v1.0

Contents

Download Pdf Manuals

Related Search

Related Contents