Tango 20 - Enersound
Contents
1. for approx 2 seconds 14 Selecting Channels 1 The unit has 20 channel settings 2 To change channels Press the CHANNEL key or CHANNEL key Setting the Volume To increase the volume Press the VOLUME key To decrease the volume Press the VOLUME key Changing Factory Set Frequencies The receiver is factory set to the following frequencies CH 1 72 1 MHz CH 6 75 3 MHz CH 11 72 2 MHz CH 16 72 4 MHz CH 2 72 5 MHz CH 7 72 3 MHz CH 12 72 6 MHz CH 17 75 6 MHz CH 3 72 9 MHz CH 8 72 7 MHz CH 13 75 4 MHz CH 18 72 0 MHz CH 4 75 7 MHz CH 9 75 5 MHz CH 14 75 8 MHz CH 19 76 0 MHz CH 5 74 7 MHz CH 10 75 9 MHz CH 15 72 8 MHz CH 20 73 0 MHz 15 If you wish to modify the frequency assigned to a channel please follow the steps listed below 1 Select the desired channel by pressing the CHANNEL key or CHANNEL key 2 Press and hold the PROGRAM button for approx 6 seconds to access the program mode and the current assigned frequency will be shown on the display Press the CHANNEL key to modify the frequency assigned to that channel 4 Press the SET key to save your selection Proceed within 10 seconds while setting otherwise the unit will switch back to normal mode and you will have to repeat this procedure 5 Press and hold the PROGRAM key for 6 seconds to exit the PROGRAM mode otherwise after 10 seconds the receiver will switch back to normal mode automatically W2. make technical and design modifications to the receiver without notice 19 Disposal Dispose the packaging in the proper manner Containers for the proper disposal of batteries are provided at battery retailers as well as at local authority collection points Should you wish to dispose the product do so in accordance with the latest local regulations Details are available from your local authority z 2012 All rights reserved www enersound com 20
3. outside the US please consult with your local dealer about the terms and conditions applicable in your county Proof of purchase in the form of a bill of sale invoice number or receipted invoice which is evidence that the unit is within the warranty period must be presented to obtain warranty service If you experience difficulty with your system send an email to support enersound com with your name address phone number and a complete description of the problem We will respond to you as soon as possible and if it is necessary to return the system for service your Customer Service Representative will give you a Return Authorization Number RAN and shipping instructions For more information visit www enersound com You may also call 1 305 731 2416 or our toll free number 1 800 644 5090 within the US 18 Technical Data Model R 120 Audio frequency response 80 Hz to 12 Khz Batteries 2 Alkaline AAA 1 5V x 2 Audio power 16 mW 16mW at 32 ohms Battery life 35 hours of use approx Audio connector 3 5mm stereo phone jack Number of channels 20 programmable Distortion THD 0 5 Frequency range FM 72 0 to 76 0 MHz Current consumption 27 mA nominal FM deviation 75 KHz Dimensions 3 Diameter 76 mm De emphasis 75 uS High 1 22 31 mm Sensitivity 1 413 uV at 12 db SINAD Weight without batteries 2 3 ounces 65g Signal to noise ratio 55 db at 100 uV Weight with batteries 3 1 ounces 88g We reserve the right to
4. GRIERS 3 UND R IzZO SZ 20 Channel Programmable Digital Receiver User Manual Espanol Para descargar este manual en espafiol ingrese a www enersound com manuals Portugues Para baixar este manual em portugu s acesse www enersound com manuals INDEX About This Manual 3 Changing Factory Set Frequencies 15 Safety Warnings 4 Locking Unlocking the Receiver 17 Control Panel ssassn 7 Warani yV kelaya wek l ye k Seke k ne 17 19 Inserting Batteries 9 Technical Daaa 19 Selecting Carrying Option 10 Disposal seriais eyer 20 el EET 13 Using the Receiver 14 Switching the Receiver On and Off 14 Selecting ChannelS 15 Setting the volume 15 NOTE To switch the receiver on and off gently press and hold the POWER key for approx 2 seconds About this Manual Read this user manual carefully before using your receiver Use the product only as described to avoid accidental injury or damage Also read safety warnings carefully Keep this manual for future reference If you give this product to someone else remember to include this manual Symbols in this Manual A This symbol warns of hazards that may cause injury The word HAZARD indicates a life threatening risk or the possibility that a significant personal inj
5. Note For multi channel operation in the same location it is recommended to leave a separation of at least 0 4 MHz between channels and place transmitter s antennas apart from each other 16 Locking Unlocking the Receiver The receiver can be locked to prevent changing channels accidentally The lock function will not affect Volume or Power buttons 1 To lock the receiver press and hold the LOCK key for approx 2 seconds until the key symbol appears on the bottom right corner of the display 2 To unlock the receiver press and hold the LOCK key for approx 2 seconds until the key symbol disappears from the bottom right corner of the display Limited Warranty Enersound warrants its receivers R 120 to be free from defects in workmanship and material under normal use and conditions for one year from the date of purchase to an authorized dealer All other products and accessories including but not limited to headphones earphones belt clips neck straps cases cables etc are warranted for 90 days from date of purchase This warranty is only available to the original end purchaser of the product and cannot be transferred If this product is determined to be defective Enersound will repair or replace the receiver at its option at no charge Customer has to pay for shipping This warranty is void if damage occurred because of misuse or if the product has been repaired or modified by anyone other than a factory authorized service
6. t intend to use the receiver for a prolonged period of time This will avoid damage that may be caused by leakage e Do not use caustic cleaning products benzene solvents etc for cleaning These substances may damage the surface of the case e Always replace all batteries at once and do not use different battery types or brands or batteries with different capacities HAZARD Pacemaker Safety e Before using this receiver with a pacemaker or another medical device consult your physician or the manufacturer of your pacemaker or another medical device e If you have a pacemaker or another medical device make sure that you are using this receiver in accordance with safety guidelines established by your physician or the pacemaker manufacturer Control Panel Front View Side View SET PROGRAM Lock POWER j SET PROGRAM Fastening eyelet _ e GE Headphones For neck strap Connection Jack Inserting Batteries 1 2 3 4 Turn the lid of the battery compartment on the back side of the receiver as far as it will go in the OPEN direction Remove the lid If necessary tap the receiver against the palm of your hand to loosen the lid Insert batteries as indicated on the base of the battery compartment Make sure that the polarity is correct Replace the lid and turn it clockwise as far as it will go Information about Replacing Batteries Replace batteries when
7. technician Warranty does not cover normal wear and tear on the product or any other physical damage unless the damage was the result of a manufacturing defect Enersound has no control over the conditions under which this product is used Therefore disclaims 17 all warranties not set forth above both express and implied with respect to the R 120 receiver including but not limited to any implied warranty of merchantability or fitness for a particular purpose Enersound R 120 s manufacturer distributors and or dealers shall not be liable to any person or entity for any medical expenses or any direct incidental or consequential damages caused by any use defect failure or malfunction of the product whether a claim for such damages is based upon warranty contract tort or otherwise The sole remedy for any defect failure or malfunction of the product is replacement of the product No person has any authority to bind Enersound to any representation or warranty with respect to the R 120 receiver This warranty gives you specific legal rights and you may also have other rights which vary from state to state Some states do not allow limitations on how long an implied warranty lasts the exclusion or limitation of incidental or consequential damages so the above limitation may not apply to you This warranty applies to products sold only within the United States of America and does not cover products sold AS IS or WITH ALL FAULTS For products sold
8. the battery symbol in the display is flashing Any program saved will remain stored for approximately 1 2 minutes while you replace the batteries If the belt clip is attached to the receiver you will have to unscrew it before opening the lid of the battery compartment Use alkaline batteries only Selecting Carrying Option Carrying Options at a Glance NI AETR k Z v 4 A with the neck strap to a belt or trousers 10 TAN j X Zik 4 fy on the arm Option 1 Using the Neck Strap HAZARD When worn around the neck the neck strap presents a risk of strangulation e Keep the receiver including the neck strap out of reach of children Never allow children to play with the neck strap e Particular care must be taken when the receiver is attached to the neck strap The strap is already threaded but it can easily be removed However if you want to thread it again at a later time proceed as follows 1 Thread the thin loop of the neck strap through the eyelet on the upper side of the receiver If necessary use a bent paperclip for help 2 Pull the other end of the neck strap completely through the loop 11 Option 2 Attached to your Belt 1 Remove the lid of the battery compartment on the back side 2 Pull or press the small cap out 3 Replace the lid of the battery compartment 4 Using the screw attach the belt clip to the receiver Keep the cap in a safe place yo
9. u might want to e remove the belt clip in the future and close the opening Do not insert your belt through the clip slots They are designed for the arm band 12 Option 3 On the Arm 1 Insert the arm band through the slots of the belt clip 2 Proceed as described above in Option 2 Items 1 3 3 Screw the belt clip to the receiver with the arm band pulled through Use the Velcro to fit the arm band to your arm width Care CAUTION Damage to the Unit Do not use caustic cleaners alcohol thinners etc to clean the case Whenever necessary use a soft dry cloth to clean the case Using the Receiver WARNING The use of headphones earphones at a loud volume or over a prolonged period of time can lead to permanent hearing damage Set the volume at a low level before putting the headphones on On the optional model R 120BL the display will light up for a few seconds when a key is pressed while the receiver is in operation When the battery charge is under 1 3 approximately the receiver will operate in a save mode in which the back light is turned off The standard receiver R 120 does not include a backlight The headphone cord also serves as an antenna Therefore it should be fully extended Note In the United States the FCC rules limit use of this equipment to auditory assistance Switching the Receiver On and Off To switch the receiver on and off gently press and hold the POWER key
10. ury may occur The word CAUTION represents the risk of slight injury or damage Q This is how supplementary information is shown 3 Safety Warnings ZAN Intended Use This receiver is designed for private use HAZARD to Children e Batteries can be highly dangerous if swallowed Therefore keep batteries and the receiver out of the reach of children If a battery has been swallowed seek medical assistance immediately e Keep the packaging out of children s reach as it may cause suffocation HAZARD Neck Strap Be careful when using the neck strap Under unfavorable circumstances you could strangle yourself with the neck strap Never allow children to play with the neck strap They could strangle themselves WARNING Damage to your Health e Using headphones at a loud volume or over a prolonged period of time can lead to permanent hearing damage e Batteries should not be recharged or reactivated by other means taken apart thrown into fire or short circuited There is a risk of explosion CAUTION Damages e Protect the receiver against moisture water dust extreme temperatures or direct sunlight e Never let the receiver fall and do not expose it to a strong impact e Do not use the receiver or its accessories if there are any visible signs of damage Never take the receiver or its accessories apart Have repairs carried out by the manufacturer only e Remove batteries from the receiver if they are dead or if you do no
Download Pdf Manuals
Related Search